Effective Bidirectional Mott-Schottky Catalysts Derived from Spent LiFePO4 Cathodes for Robust Lithium-Sulfur Batteries

It is deemed as a tough yet profound project to comprehensively cope with a range of detrimental problems of lithium-sulfur batteries (LSBs), mainly pertaining to the shuttle effect of lithium polysulfides (LiPSs) and sluggish sulfur conversion. Herein, a Co2 P-Fe2 P@N-doped carbon (Co2 P-Fe2 P@NC) Mott-Schottky catalyst is introduced to enable bidirectionally stimulated sulfur conversion. This catalyst is prepared by simple carbothermal reduction of spent LiFePO4 cathode and LiCoO2 . The experimental and theoretical calculation results indicate that thanks to unique surface/interface properties derived from the Mott-Schottky effect, full anchoring of LiPSs, mediated Li2 S nucleation/dissolution, and bidirectionally expedited "solid⇌liquid⇌solid" kinetics can be harvested. Consequently, the S/Co2 P-Fe2 P@NC manifests high reversible capacity (1569.9 mAh g-1 ), superb rate response (808.9 mAh g-1 at 3C), and stable cycling (a low decay rate of 0.06% within 600 cycles at 3C). Moreover, desirable capacity (5.35 mAh cm-2 ) and cycle stability are still available under high sulfur loadings (4-5 mg cm-2 ) and lean electrolyte (8 µL mg-1 ) conditions. Furthermore, the as-proposed universal synthetic route can be extended to the preparation of other catalysts such as Mn2 P-Fe2 P@NC from spent LiFePO4 and MnO2 . This work unlocks the potential of carbothermal reduction phosphating to synthesize bidirectional catalysts for robust LSBs.

Effect of in-plane Mott-Schottky on the hydroxyl deprotonation in MoS2@Co3S4/NC heterostructure for efficient overall water splitting

The development of clean energy sources such as hydrogen is indispensable for achieving the long-term goal of carbon neutrality by the mid-century. The utilization of renewable energy for power generation to electrolyze water for hydrogen production is one of the most desirable green hydrogen production methods. The cathode side of the decomposing water undergoes the oxygen precipitation reaction, and the oxygen precipitation mechanism can be divided into the adsorbed evolution mechanism (AEM) and lattice oxygen oxidation mechanism (LOM). Based on the adsorbed evolution mechanism (AEM), the deprotonation (DeP) process involving multiple electron transfers is central to determining the oxygen release. DeP is essentially a proton-transfer process that allows for the establishment of a bifunctional catalyst system with both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Consequently, an all-transition-metal-based MoS2@Co3S4/NC heterostructure was designed and constructed in this study for the efficient total decomposition of water. The MoS2@Co3S4/NC catalyst achieved the HER and OER current densities of 10 mA cm-2 at the low overpotential (56 mV, 243 mV) and showed excellent long-term durability among all samples. The Mott-Schottky effect is considered the driving force for the HER and DeP in the OER. This study proposes a rational design for bifunctionalized non-precious metal electrolytic water catalysts using the Mott-Schottky effect as a criterion.

Facile construction of robust Ru-Co3O4 Mott-Schottky catalyst enabling efficient dehydrogenation of ammonia borane for hydrogen generation

Developing efficient catalysts for the dehydrogenation of ammonia borane (AB) is important for the safe storage and controlled release of hydrogen, but it is a challenging task. In this study, we designed a robust Ru-Co₃O₄ catalyst using the Mott-Schottky effect to induce favorable charge rearrangement. The self-created electron-rich Co₃O₄ and electron-deficient Ru sites at heterointerfaces are indispensable for the activation of the B-H bond in NH₃BH₃ and the OH bond in H₂O, respectively. The synergistic electronic interaction between the electron-rich Co₃O₄ and electron-deficient Ru sites at the heterointerfaces resulted in an optimal Ru-Co₃O₄ heterostructure that exhibited outstanding catalytic activity for the hydrolysis of AB in the presence of NaOH. The heterostructure had an extremely high hydrogen generation rate (HGR) of 12238 mL min^-1 g_cat^-1 and an expected high turnover frequency (TOF) of 755 mol_H2 mol_Ru^-1 min^-1 at 298 K. The activation energy needed for the hydrolysis was low (36.65 kJ mol^-1). This study opens up a new avenue for the rational design of high-performance catalysts for AB dehydrogenation based on the Mott-Schottky effect.

In-Plane Mott-Schottky Effects Enabling Efficient Hydrogen Evolution from Mo5 N6 -MoS2 Heterojunction Nanosheets in Universal-pH Electrolytes

Cost-effective electrocatalysts for the hydrogen evolution reaction (HER) spanning a wide pH range are highly desirable but still challenging for hydrogen production via electrochemical water splitting. Herein, Mo₅ N₆ -MoS₂ heterojunction nanosheets prepared on hollow carbon nanoribbons (Mo₅ N₆ -MoS₂ /HCNRs) are designed as Mott-Schottky electrocatalysts for efficient pH-universal HER. The in-plane Mo₅ N₆ -MoS₂ Mott-Schottky heterointerface induces electron redistribution and a built-in electric field, which effectively activates the inert MoS₂ basal planes to intrinsically increase the electrocatalytic activity, improve electronic conductivity, and boost water dissociation activity. Moreover, the vertical Mo₅ N₆ -MoS₂ nanosheets provide more activated sites for the electrochemical reaction and facilitate mass/electrolyte transport, while the tightly coupled HCNRs substrate and metallic Mo₅ N₆ provide fast electron transfer paths. Consequently, the Mo₅ N₆ -MoS₂ /HCNRs electrocatalyst delivers excellent pH-universal HER performances exemplified by ultralow overpotentials of 57, 59, and 53 mV at a current density of 10 mA cm^-2 in acidic, neutral, and alkaline electrolytes with Tafel slopes of 38.4, 43.5, and 37.9 mV dec^-1 , respectively, which are superior to those of the reported MoS₂ -based catalysts and outperform Pt in overall water splitting. This work proposes a new strategy to construct an in-plane heterointerface on the nanoscale and provides fresh insights into the HER electrocatalytic mechanism of MoS₂ -based heterostructures.

Catalytic Scenarios Over Metal-Carbon Interaction Interface

Numerous efforts have been devoted to investigating the catalytic events and disclosing the catalytic nature of the metal-carbon interaction interface. Nevertheless, the local deconstruction of catalytically active metal-carbon interface was still missing. Herein, the selected four types of landmark catalytic paradigms were highlighted, which was expected to clarify their essence and thus simplify the catalytic scenarios of the metal-carbon interface—carbon-supported metal nanoparticles, carbon-confined single-atom sites, chainmail catalysis, and the Mott-Schottky effect. The potential challenges and new opportunities were also proposed in the field. This perspective is believed to give an in-depth understanding of the catalytic nature of the metal-carbon interaction interface and in turn provide rational guidance to the delicate design of novel high-performance carbon-supported metal catalysts.

Interfacial Electronic Effects in Co@N-Doped Carbon Shells Heterojunction Catalyst for Semi-Hydrogenation of Phenylacetylene

Metal-supported catalyst with high activity and relatively simple preparation method is given priority to industrial production. In this work, this study reported an easily accessible synthesis strategy to prepare Mott-Schottky-type N-doped carbon encapsulated metallic Co (Co@N_p+gC) catalyst by high-temperature pyrolysis method in which carbon nitride (g-C₃N₄) and dopamine were used as support and nitrogen source. The prepared Co@N_p+gC presented a Mott-Schottky effect; that is, a strong electronic interaction of metallic Co and N-doped carbon shell was constructed to lead to the generation of Mott-Schottky contact. The metallic Co, due to high work function as compared to that of N-doped carbon, transferred electrons to the N-doped outer shell, forming a new contact interface. In this interface area, the positive and negative charges were redistributed, and the catalytic hydrogenation mainly occurred in the area of active charges. The Co@N_p+gC catalyst showed excellent catalytic activity in the hydrogenation of phenylacetylene to styrene, and the selectivity of styrene reached 82.4%, much higher than those of reference catalysts. The reason for the promoted semi-hydrogenation of phenylacetylene was attributed to the electron transfer of metallic Co, as it was caused by N doping on carbon.

Mild and selective hydrogenation of CO2 into formic acid over electron-rich MoC nanocatalysts

The direct hydrogenation of CO₂ using H₂ gas is a one-stone-two-birds route to produce highly value-added hydrocarbon compounds and to lower the CO₂ level in the atmosphere. However, the transformation of CO₂ and H₂ into hydrocarbons has always been a great challenge while ensuring both the activity and selectivity over abundant-element-based nanocatalysts. In this work, we designed a Schottky heterojunction composed of electron-rich MoC nanoparticles embedded inside an optimized nitrogen-doped carbon support (MoC@NC) as the first example of noble-metal-free heterogeneous catalysts to boost the activity of and specific selectivity for CO₂ hydrogenation to formic acid (FA) in liquid phase under mild conditions (2 MPa pressure and 70 °C). The MoC@NC catalyst with a high turnover frequency (TOF) of 8.20 mol_FA mol_MoC^-1 h^-1 at 140 °C and an excellent reusability are more favorable for real applications.