Strategies to design conjugated polymer based materials for biological sensing and imaging

Cationic conjugated polymers with tunable hydrophobicity for efficient treatment of multidrug-resistant wound biofilm infections

Biofilm-associated infections arising from antibiotic-resistant bacteria pose a critical challenge to global health. We report the generation of a library of cationic conjugated poly(phenylene ethynylene) (PPE) polymers featuring trimethylammonium terminated sidechains with tunable hydrophobicity. Screening of the library identified an amphiphilic polymer with a C11 hydrophobic spacer as the polymer with the highest antimicrobial efficacy against biofilms in the dark with excellent selectivity. These polymers are highly fluorescent, allowing label-free monitoring of polymer-bacteria/biofilm interactions. The amphiphilic conjugated polymer penetrated the biofilm matrix in vitro and eradicated resident bacteria through membrane disruption. This C11 polymer was likewise effective in an in vivo murine model of antibiotic-resistant wound biofilm infections, clearing >99.9 % of biofilm colonies and efficient alleviation of biofilm-associated inflammation. The results demonstrate the therapeutic potential of the fluorescent conjugated polymer platform as a multi-modal antimicrobial and imaging tool, surpassing conventional antimicrobial strategies against resilient biofilm infection.

Conjugated Molecules Based Multi-Component Artificial Photosynthesis System for Producing Multi-Objective Products

The development of artificial photosynthesis systems that mimics natural photosynthesis can help address the issue of energy scarcity by efficiently utilizing solar energy. Here, it presents liposomes-based artificial photosynthetic nanocapsules (PSNC) integrating photocatalytic, chemical catalytic, and biocatalytic systems through one-pot method. The PSNC contains 5,10,15,20-tetra(4-pyridyl) cobalt-porphyrin, tridipyridyl-ruthenium nitrate, oligo-pphenyl-ethylene-rhodium complex, and creatine kinase, efficiently generating oxygen, nicotinamide adenine dinucleotide (NADH), and adenosine triphosphate with remarkable enhancements of 231%, 30%, and 86%, compared with that of molecules mixing in aqueous solution. Additionally, the versatile PSNC enables simulation of light-independent reactions, achieving a controllable output of various target products. The regenerated NADH within PSNC further facilitates alcohol dehydrogenase, yielding methanol with a notable efficiency improvement of 37%. This work introduces a promising platform for sustainable solar energy conversion and the simultaneous synthesis of multiple valuable products in an ingenious and straightforward way.

Organic Semiconducting Polymers for Augmenting Biosynthesis and Bioconversion

Solar-driven biosynthesis and bioconversion are essential for achieving sustainable resources and renewable energy. These processes harness solar energy to produce biomass, chemicals, and fuels. While they offer promising avenues, some challenges and limitations should be investigated and addressed for their improvement and widespread adoption. These include the low utilization of light energy, the inadequate selectivity of products, and the limited utilization of inorganic carbon/nitrogen sources. Organic semiconducting polymers offer a promising solution to these challenges by collaborating with natural microorganisms and developing artificial photosynthetic biohybrid systems. In this Perspective, we highlight the latest advancements in the use of appropriate organic semiconducting polymers to construct artificial photosynthetic biohybrid systems. We focus on how these systems can enhance the natural photosynthetic efficiency of photosynthetic organisms, create artificial photosynthesis capability of nonphotosynthetic organisms, and customize the value-added chemicals of photosynthetic synthesis. By examining the structure-activity relationships and emphasizing the mechanism of electron transfer based on organic semiconducting polymers in artificial photosynthetic biohybrid systems, we aim to shed light on the potential of this novel strategy for artificial photosynthetic biohybrid systems. Notably, these coupling strategies between organic semiconducting polymers and organisms during artificial photosynthetic biohybrid systems will pave the way for a more sustainable future with solar fuels and chemicals.

The application of nanoparticles based on ferroptosis in cancer therapy

Ferroptosis is a new form of non-apoptotic programmed cell death. Due to its effectiveness in cancer treatment, there are increasing studies on the application of nanoparticles based on ferroptosis in cancer therapy. In this paper, we present a summary of the latest progress in nanoparticles based on ferroptosis for effective tumor therapy. We also describe the combined treatment of ferroptosis with other therapies, including chemotherapy, radiotherapy, phototherapy, immunotherapy, and gene therapy. This summary of drug delivery systems based on ferroptosis aims to provide a basis and inspire opinions for researchers concentrating on exploring this field. Finally, we present some prospects and challenges for the application of nanotherapies to clinical treatment by promoting ferroptosis in cancer cells.

Silica-Based Platform Decorated with Conjugated Polymer Dots and Prussian Blue for Improved Photodynamic Cancer Therapy

To advance cancer treatment, we have developed a novel composite material consisting of conjugated polymer dots (CPDs) and Prussian blue (PB) particles, which were immobilized on, and encapsulated within, silica particles, respectively. The CPDs functioned as both a photosensitizer and a photodynamic agent, and the PB acted as a photothermal agent. The silica platform provided a biocompatible matrix that brought the two components into close proximity. Under laser irradiation, the fluorescence from the CPDs in the composite material enabled cell imaging and was subsequently converted to thermal energy by PB. This efficient energy transfer was accomplished because of the spectral overlap between the emission of donor CPDs and the absorbance of acceptor PB. The increase in local temperature in the cells resulted in a significant increase in the amount of reactive oxygen species (ROS) generated by CPDs, in which their independent use did not produce sufficient ROS for cancer cell treatment. To assess the impact of the enhanced ROS generation by the composite material, we conducted experiments using cancer cells under 532 nm laser irradiation. The results showed that with the increase in local temperature, the generated ROS increased by 30% compared with the control, which did not contain PB. When the silica-based composite material was positioned at the periphery of the tumor for 120 h, it led to a much slower tumor growth than other materials tested. By using a CPD-based photodynamic therapy platform, a new simplified approach to designing and preparing cancer treatments could be achieved, which included photothermal PB-assisted enhanced ROS generation using a single laser. This advancement opens up an exciting new opportunity for effective cancer treatment.

π-Conjugated Polymer Nanoparticles from Design, Synthesis to Biomedical Applications: Sensing, Imaging, and Therapy

In the past decade, π-conjugated polymer nanoparticles (CPNs) have been considered as promising nanomaterials for biomedical applications, and are widely used as probe materials for bioimaging and drug delivery. Due to their distinctive photophysical and physicochemical characteristics, good compatibility, and ease of functionalization, CPNs are gaining popularity and being used in more and more cutting-edge biomedical sectors. Common synthetic techniques can be used to synthesize CPNs with adjustable particle size and dispersion. More importantly, the recent development of CPNs for sensing and imaging applications has rendered them as a promising device for use in healthcare. This review provides a synopsis of the preparation and functionalization of CPNs and summarizes the recent advancements of CPNs for biomedical applications. In particular, we discuss their major role in bioimaging, therapeutics, fluorescence, and electrochemical sensing. As a conclusion, we highlight the challenges and future perspectives of biomedical applications of CPNs.

Conjugated Polymeric Materials in Biological Imaging and Cancer Therapy

Conjugated polymers (CPs) have attracted much attention in the fields of chemistry, medicine, life science, and material science. Researchers have carried out a series of innovative researches and have made significant research progress regarding the unique photochemical and photophysical properties of CPs, expanding the application range of polymers. CPs are polymers formed by the conjugation of multiple repeating light-emitting units. Through precise control of their structure, functional molecules with different properties can be obtained. Fluorescence probes with different absorption and emission wavelengths can be obtained by changing the main chain structure. By modifying the side chain structure with water-soluble groups or selective recognition molecules, electrostatic interaction or specific binding with specific targets can be achieved; subsequently, the purpose of selective recognition can be achieved. This article reviews the research work of CPs in cell imaging, tumor diagnosis, and treatment in recent years, summarizes the latest progress in the application of CPs in imaging, tumor diagnosis, and treatment, and discusses the future development direction of CPs in cell imaging, tumor diagnosis, and treatment.

Induced Self-Assembly and Disassembly of Alkynylplatinum(II) 2,6-Bis(benzimidazol-2'-yl)pyridine Complexes with Charge Reversal Properties: "Proof-of-Principle" Demonstration of Ratiometric Förster Resonance Energy Transfer Sensing of pH

A series of pH-responsive alkynylplatinum(II) 2,6-bis(benzimidazol-2'-yl)pyridine (bzimpy) complexes with charge-reversal properties was synthesized, and the supramolecular assemblies between conjugated polyelectrolyte, PFP-OSO₃^-, and [Pt{bzimpy(TEG)₂}{C≡C-C₆H₃-(COOH)₂-3,5}]Cl (1) have been studied using UV-vis absorption, emission, and resonance light scattering (RLS) spectroscopy. An efficient Förster resonance energy transfer (FRET) from PFP-OSO₃^- donor to the aggregated 1 as acceptor with the aid of Pt(II)···Pt(II) interactions has been presented, which leads to a growth of triplet metal-metal-to-ligand charge transfer (³MMLCT) emission in the low-energy red region. The two-component PFP-OSO₃^--1 ensemble was then exploited as a "proof-of-principle" concept strategy for pH sensing by tracking the ratiometric emission changes. With the aid of judicious molecular design on the pH-driven charge-reversal property, the polyelectrolyte-induced self-assembly and the FRET from PFP-OSO₃^- to the platinum(II) aggregates have been modulated. Together with its excellent reversibility and photostability, the extra stability provided by the Pt(II)···Pt(II) and π-π stacking interactions on top of the electrostatic and hydrophobic interactions existing in polyelectrolye-complex assemblies has led to a selective and sensitive pH sensing assay.

The Role of Stabilizing Copolymer in Determining the Physicochemical Properties of Conjugated Polymer Nanoparticles and Their Nanomedical Applications

Conjugated polymer nanoparticles (CPNs) are a promising class of nanomaterials for biomedical applications, such as bioimaging, gene and drug delivery/release, photodynamic therapy (PDT), photothermal therapy (PTT), and environmental sensing. Over the past decade, many reports have been published detailing their synthesis and their various potential applications, including some very comprehensive reviews of these topics. In contrast, there is a distinct lack of overview of the role the stabilizing copolymer shells have on the properties of CPNs. This review attempts to correct this oversight by scrutinizing reports detailing the synthesis and application of CPNs stabilized with some commonly-used copolymers, namely F127 (Pluronic poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) diacrylate), PSMA (poly(styrene-co-maleic anhydride)), PLGA (poly(D, L-lactide-co-glycolide)) and PEG (polyethylene glycol) derivatives. The analysis of the reported physicochemical properties and biological applications of these CPNs provides insights into the advantages of each group of copolymers for specific applications and offers a set of guidance criteria for the selection of an appropriate copolymer when designing CPNs-based probes. Finally, the challenges and outlooks in the field are highlighted.

Water-soluble conjugated polymers for bioelectronic systems

Bioelectronics is an interdisciplinary field of research that aims to establish a synergy between electronics and biology. Contributing to a deeper understanding of bioelectronic processes and the built bioelectronic systems, a variety of new phenomena, mechanisms and concepts have been derived in the field of biology, medicine, energy, artificial intelligence science, etc. Organic semiconductors can promote the applications of bioelectronics in improving original performance and creating new features for organisms due to their excellent photoelectric and electrical properties. Recently, water-soluble conjugated polymers (WSCPs) have been employed as a class of ideal interface materials to regulate bioelectronic processes between biological systems and electronic systems, relying on their satisfying ionic conductivity, water-solubility, good biocompatibility and the additional mechanical and electrical properties. In this review, we summarize the prominent contributions of WSCPs in the aspect of the regulation of bioelectronic processes and highlight the latest advances in WSCPs for bioelectronic applications, involving biosynthetic systems, photosynthetic systems, biophotovoltaic systems, and bioelectronic devices. The challenges and outlooks of WSCPs in designing high-performance bioelectronic systems are also discussed.

Rational Design of Biomaterials to Potentiate Cancer Thermal Therapy

Cancer thermal therapy, also known as hyperthermia therapy, has long been exploited to eradicate mass lesions that are now defined as cancer. With the development of corresponding technologies and equipment, local hyperthermia therapies such as radiofrequency ablation, microwave ablation, and high-intensity focused ultrasound, have has been validated to effectively ablate tumors in modern clinical practice. However, they still face many shortcomings, including nonspecific damages to adjacent normal tissues and incomplete ablation particularly for large tumors, restricting their wide clinical usage. Attributed to their versatile physiochemical properties, biomaterials have been specially designed to potentiate local hyperthermia treatments according to their unique working principles. Meanwhile, biomaterial-based delivery systems are able to bridge hyperthermia therapies with other types of treatment strategies such as chemotherapy, radiotherapy and immunotherapy. Therefore, in this review, we discuss recent progress in the development of functional biomaterials to reinforce local hyperthermia by functioning as thermal sensitizers to endow more efficient tumor-localized thermal ablation and/or as delivery vehicles to synergize with other therapeutic modalities for combined cancer treatments. Thereafter, we provide a critical perspective on the further development of biomaterial-assisted local hyperthermia toward clinical applications.

Cross-Dehydrogenative Coupling Polymerization via C-H Activation for the Synthesis of Conjugated Polymers

Owing to their versatile (opto)electronic properties, conjugated polymers have found application in several organic electronic devices. Cross-coupling reactions such as Stille, Suzuki, Kumada couplings, and direct arylation reactions have proved to be effective for their synthesis. More atom-efficient oxidative direct arylation polymerization has also been reported for making homopolymers. However, growing interest toward donor-acceptor polymers has led to the recent emergence of cross-dehydrogenative coupling (CDC) polymerization to synthesize alternating copolymers without any prefunctionalization of monomers. Metal-catalyzed cross-coupling of two simple arenes via double C-H activation, or of an arene with an alkene via oxidative Heck-type reaction have been used so far for CDC polymerization. In this article, we discuss the development of CDC polymerization protocols along with the relevant small molecule CDC reactions for an improved understanding of these reactions.

A Poly(carbazole-alt-triazole) with Thiabendazole Side Groups as an "On-Off-On" Fluorescent Probe for Detection of Cu(II) Ion and Cysteine

A novel conjugated polymer PCZBTA-TBZ containing thiabendazole as recognition unit was synthesized via Suzuki coupling reaction, and its structural characterization, spectroscopic analysis and photophysical properties were investigated. In the metal ion response study, the addition of Cu²⁺ led to the occurrence of the photoinduced electron transfer (PET) mechanism, which significantly quenched the fluorescence of the polymer PCZBTA-TBZ with a quenching effect of 98%. Furthermore, I^- can significantly quench the fluorescence of the polymer, but other anions have no such effect. According to the density functional theory calculation, compared with other polycarbazoles or other alternative copolymers containing carbazole, with alternating carbazole and triazole enhances the electron mobility and reduces the energy band gap of the polymer. Due to the strong coordination ability between Cu²⁺ and Cys, the adding Cys competes the Cu²⁺ in the [PCZBTA-TBZ-Cu²⁺] complex, blocking the occurrence of PET, and the fluorescence intensity of PCZBTA-TBZ is restored. The addition of other amino acids caused almost no change. The polymer is expected to be used for dual fluorescence detection of specific metal ions and Cys.

A Label-Free, Mix-and-Detect ssDNA-Binding Assay Based on Cationic Conjugated Polymers

The accurate, simple, and efficient measurement of the concentration of single-stranded DNA (ssDNA) is important for many analytical applications, such as DNA adsorption, biosensor design, and disease diagnosis, but it is still a challenge. Herein, we studied a cationic conjugated polymer (CCP)-based ssDNA assay taking advantage of the obvious fluorescence change of CCPs upon binding ssDNA. Poly(3-(3'-N,N,N-triethylamino-1'-propyloxy)-4-methyl-2,5-thiophene hydrochloride) (PMNT) achieved an apparent dissociation constant (K_d) of 57 ± 4 nM for ssDNA, indicating a very high binding affinity between PMNT and ssDNA. This allowed us to develop a CCP-based ssDNA biosensor with a detection limit of 0.6 nM, similar to the fluorescence-dye-based method using SYBR Green I and SYBR Gold. Our CCP-based biosensor produced smaller differences among ssDNA samples with different base compositions. In addition, the existence of double-stranded DNA (dsDNA) at different concentrations did not interfere with the fluorescence of PMNT, indicating that our CCP-based biosensor was more suitable for the measurement of ssDNA. Compared with fluorescence-intensity-based quantification, our CCP system allowed ratiometric quantification, which made the calibration easier and more robust. We then applied our method to the quantification of ssDNA on AuNPs using both unmodified and thiolated ssDNA, and the accurate quantification of ssDNA was achieved without any fluorophore modification. This method provides an alternative approach for the measurement of ssDNA.

Real scenario of metal ion sensor: is conjugated polymer helpful to detect hazardous metal ion

Metal ions from natural and anthropogenic sources cause pollution to society and the environment is major concern in the present scenario. The deposition and contamination of metal ions in soil and water affect the biogeochemical cycles. Thus, it threatens the everyday life of living and non-living organisms. Reviews on the detection of metal ions through several techniques (Analytical methods, electrochemical techniques, and sensors) and materials (Nanoparticles, carbon dots (quantum dots), polymers, chiral molecules, metal-organic framework, carbon nanotubes, etc.) are addressed separately in the present literature. This review reveals the advantages and disadvantages of the techniques and materials for metal ion sensing with crucial factors. Furthermore, it focus on the capability of conjugated polymers (CPs) as metal ion sensors able to detect/sense hazardous metal ions from environmental samples. Six different routes can synthesize this type of CPs to get specific properties and better metal ion detecting capability in vast research areas. The metal ion detection by CP is time-independent, simple, and low cost compared to other materials/techniques. This review outlines recent literature on the conjugated polymer for cation, anion, and dual ion sensors. Over the last half decades published articles on the conjugated polymer are discussed and compared.

Luminescence-enhanced conjugated polymer dots through thermal treatment for cell imaging

Conjugated polymer dots (Pdots) are often used as excellent fluorescent probes in the biomedical field. In the process of preparing Pdots, the rapid change of the solvent polarity will result in a messy and defective stacking of the polymer chains in the particle, and these stacking defects of the polymer chains may weaken its luminescence properties. Here, we try to optimize the stacking of the conjugated polymer chains by the thermal annealing treatment. After the low temperature thermal treatment, the fluorescence intensity of Pdots can be enhanced by about 11%-29%, and Pdots maintain their original stability and biosafety. We used transmission electron microscopy (TEM) and single particle fluorescence imaging to reveal the possible mechanism of the chain stacking optimization process, that is, the thermal annealing process of Pdots is the competition between internal chain rearrangement in the particle and particle aggregation. The luminescence-enhanced Pdots exhibit good cellular imaging performance. These results prove that it is feasible to extend the thermal annealing treatment from planar polymer devices to polymer nanoparticles. It provides the possibility to realize stable and complex biological imaging applications using Pdots with a simple molecular structure, and a mature improvement scheme for the mass preparation of Pdots.

Aggregation and Binding-Directed FRET Modulation of Conjugated Polymer Materials for Selective and Point-of-Care Monitoring of Serum Albumins

Nonspecific interactions of conjugated polymers (CPs) with various proteins prove to be a major impediment for researchers when designing a suitable CP-based probe for the amplified and selective recognition of particular proteins in complex body fluids. Herein, a new strategy is presented for the precise and specific monitoring of clinically important serum albumin (SA) proteins at the nanomolar level using fluorescence resonance energy transfer (FRET)-modulated CP-surfactant ensembles as superior sensing materials. In brief, the newly designed color-tunable CP PF-DBT-Im undergoes intense aggregation with the surfactant sodium dodecyl sulfate (SDS), enabling drastic change in the emission color from violet to deep red due to intermolecular FRET. The emission of PF-DBT-Im/SDS ensembles then changed from deep red to magenta specifically on addition of SAs owing to the exclusive reverse FRET facilitated by synergistic effects of electrostatic interactions, hydrophobic forces, and the comparatively high intrinsic quantum yield of SAs. Interestingly, PF-DBT-Im itself could not differentiate SAs from other proteins, demonstrating the superiority of the PF-DBT-Im/SDS self-assembly over PF-DBT-Im. Finally, an affordable smartphone-integrated point-of-care (PoC) device is also fabricated as a proof-of-concept for the on-site and rapid monitoring of SAs, validating the potential of the system in long-term clinical applications.

Functionalization of Water-Soluble Conjugated Polymers for Bioapplications

Water-soluble conjugated polymers (WS-CPs) have found widespread use in bioapplications ranging from in vitro optical sensing to in vivo phototherapy. Modification of WS-CPs with specific molecular functional units is necessary to enable them to interact with biological targets. These targets include proteins, nucleic acids, antibodies, cells, and intracellular components. WS-CPs have been modified with covalently linked sugars, peptides, nucleic acids, biotin, proteins, and other biorecognition elements. The objective of this article is to comprehensively review the various synthetic chemistries that have been used to covalently link biofunctional groups onto WS-CP platforms. These chemistries include amidation, nucleophilic substitution, Click reactions, and conjugate addition. Different types of WS-CP backbones have been used as platforms including poly(fluorene), poly(phenylene ethynylene), polythiophene, poly(phenylenevinylene), and others. Example applications of biofunctionalized WS-CPs are also reviewed. These include examples of protein sensing, flow cytometry labeling, and cancer therapy. The major challenges and future development of functionalized conjugated polymers are also discussed.

Molecular Programming of NIR-IIb-Emissive Semiconducting Small Molecules for In Vivo High-Contrast Bioimaging Beyond 1500 nm

Materials with long-wavelength second near-infrared (NIR-II) emission are highly desired for in vivo dynamic visualizating of microstructures in deep tissues. Herein, by employing an atom-programming strategy, a series of highly fluorescent semiconducting oligomers (SOMs) with tunable NIR-IIb emissions are developed for bioimaging applications. After self-assembly into nanoparticles (NPs), they show good brightness, high photostability, and satisfactory biocompatibility. The SOM NPs are applied as probes for high-resolution imaging of whole-body and hind-limb blood vessels, biliary tract, and bladder with their emissions over 1500 nm. This work demonstrates an atom-programming strategy for constructing semiconducting small molecules with enhanced NIR-II fluorescence for deep-tissue imaging, affording new insight for advancing molecular design of NIR-II fluorophores.

Ultrabright Pdots with a Large Absorbance Cross Section and High Quantum Yield

Semiconducting polymer dots (Pdots) are increasingly used in biomedical applications due to their extreme single-particle brightness, which results from their large absorption cross section (σ). However, the quantum yield (Φ) of Pdots is typically below 40% due to aggregation-induced self-quenching. One approach to reducing self-quenching is to use FRET between the donor (D) and acceptor (A) groups within a Pdot; however, Φ values of FRET-based Pdots remain low. Here, we demonstrate an approach to achieve ultrabright FRET-based Pdots with simultaneously high σ and Φ. The importance of self-quenching was revealed in a non-FRET Pdot: adding 30 mol % of a nonabsorbing polyphenyl to a poly(9,9-dioctylfluorene) (PFO) Pdot increased Φ from 13.4 to 71.2%, yielding an ultrabright blue-emitting Pdot. We optimized the brightness of FRET-based Pdots by exploring different D/A combinations and ratios with PFO and poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-(1,4-phenylene)] (PFP) as donor polymers and poly[(9,9-dioctyl-2,7-divinylenefluorenylene)-alt-co-(1,4-phenylene)] (PFPV) and poly[(9,9-dioctylfluorenyl-2,7-diyl)-alt-co-(1,4-benzo-{2,1',3}-thiadiazole)] (PFBT) as acceptor polymers, with a fixed concentration of poly(styrene-co-maleic anhydride) as surfactant polymer. Ultrabright blue-emitting Pdots possessing high Φ (73.1%) and σ (σ_R = σ_abs/σ_all, 97.5%) were achieved using PFP/PFPV Pdots at a low acceptor content (A/[D + A], 2.5 mol %). PFP/PFPV Pdots were 1.8 times as bright as PFO/PFPV Pdots due to greater coverage of acceptor absorbance by donor emission─a factor often overlooked in D/A pair selection. Ultrabright green-emitting PFO Pdots (Φ = 76.0%, σ_R = 92.5%) were obtained by selecting an acceptor (PFBT) with greater spectral overlap with PFO. Ultrabright red-emitting Pdots (Φ = 64.2%, σ_R = 91.0%) were achieved by blending PFO, PFBT, and PFTBT to create a cascade FRET Pdot at a D:A₁:A₂ molar ratio of 61:5:1. These blue, green, and red Pdots are among the brightest Pdots reported. This approach of using a small, optimized amount of FRET acceptor polymer with a large donor-acceptor spectral overlap can be generalized to produce ultrabright Pdots with emissions that span the visible spectrum.

Conjugated Polymer-Functionalized Stretchable Supramolecular Hydrogels to Monitor and Control Cellular Behavior

Natural extracellular matrix is formed by the assembly of small molecules and macromolecules into a hydrogel-like network that can mechanically support cells and involve in cellular processes. Here, we developed a fluorescent supramolecular hydrogel based on a conjugated oligomer OFBTCO₂Na, which facilitated noncovalent assembly through hydrophobic interactions and hydrogen bonds in a molecular scale. The generated dense three-dimensional network endows the supramolecular hydrogel with stretchability and stability. Furthermore, fluorescent OFBTCO₂Na in hydrogel acted as a donor, which can excite the acceptor dyes on cells encapsulated in hydrogel via the Förster resonance energy transfer (FRET) mechanism. Investigating the fluorescence signal responsiveness of hydrogel to dynamic mechanical stretching well reflected that enhanced stretching dictated the extent of connection between the cell and matrix, which enables effective FRET at a molecular level and allow spatiotemporally monitoring cell-matrix interactions at the three-dimensional network. Importantly, cells can sense stretch forces by their connection with a hydrogel matrix. The dynamic cell-matrix interaction can be conveniently employed to formulate cell morphology. Therefore, the fluorescent supramolecular hydrogel offers a suitable culture platform not only to investigate cell interactions on interfaces but also to regulate cell behavior at interfaces.

Microwave-Assisted Synthesis of Silver Nanoparticles for Multimode Colorimetric Sensing of Multiplex Metal Ions and Molecular Informatization Applications

Plasmonic materials have been widely used in chemo/biosensing and biomedicine. However, little attention has been paid to the application of plasmonic materials in terms of the transition from molecular sensing to molecular informatization. Herein, we demonstrated that silver nanoparticles (AgNPs) prepared through facile and rapid microwave heating have multimode colorimetric sensing capabilities to different metal ions (Cr³⁺, Hg²⁺, and Ni²⁺), which can be further transformed into interesting and powerful molecular information technology (massively parallel molecular logic computing and molecular information protection). The prepared AgNPs can quantitatively and sensitively detect Cr³⁺ and Hg²⁺ in actual water samples. The AgNPs' multimode-guided multianalyte sensing processing was further investigated to construct a series of basic logic gates and advanced cascaded logic circuits by considering the analytes as the inputs and the colorimetric signals (like color, absorbance, wavelength shift) as the outputs. Moreover, the selective responses and molecular logic computing ability of AgNPs were also utilized to develop molecular cryptosteganography for encrypting and hiding some specific information, which proves that the molecular world and the information world are interconnected and use each other. This research not only opens the door for the transition from molecular sensing to molecular informatization but also provides an excellent opportunity for the construction of the "metaverse" of the molecular world.

Organic Semiconductor-Organism Interfaces for Augmenting Natural and Artificial Photosynthesis

Carbon neutrality is increasingly broadly recognized as a vehicle for climate action and sustainable development. Photosynthesis contributes to maintaining a suitable carbon-oxygen balance for survival and plays an irreplaceable role in mitigating the greenhouse effect. However, the energy conversion efficiency of photosynthesis is only about 1%, far below the theoretical maximum. With the ecological demand of carbon neutrality, it is wise and necessary to further improve the efficiency of photosynthesis. Among methods to do so, the most direct and original one is improving the utilization of photosynthetic pigments to the weak absorption region of the spectrum and thus enhancing the solar energy utilization efficiency.This Account summarizes our group's work on constructing conjugated polymer-photosynthetic organism interfaces to augment photosynthetic efficiency. Side chain modification of ionic groups or preparation of nanoparticles makes conjugated polymers water-soluble and electrically charged, which allows them to bind to the surface of photosynthetic microorganisms through electrostatic interactions or be absorbed by plant roots. Owing to the designable and unparalleled light capture and emission capabilities, funnel-like excitation energy transfer mode, and enviable biocompatibility, organic semiconductor conjugated polymers can be used as "artificial antennas" to make up for the lack of natural antenna pigments and expand the photosynthetically active radiation (PAR) range. With this strategy, we achieved enhancement of the photosynthetic efficiency of a broad range of organisms, including oxygenic photosynthetic organisms, from organelle to prokaryotic cyanobacteria, eukaryotic lower plants, and higher plants, as well as anoxygenic photosynthetic organisms. Unlike conventional semiconductors, conjugated polymers have not only electronic conductivity but also ionic conductivity, which is the main means of bioelectrical signal transduction. Therefore, they are able to act as "electron bridges" to accelerate the electron transfer rate at the material-organism interface. On this basis, we introduced conjugated polymers into artificial photosynthesis systems, including biological photovoltaics and artificial carbon sequestration, to increase energy conversion efficiency. These studies open a new frontier for functional studies of conjugated molecules and provide inspirations for the design of photosynthesis systems in the future.

Luminescent Covalent Organic Frameworks for Biosensing and Bioimaging Applications

Luminescent covalent organic frameworks (LCOFs) have attracted significant attention due to their tunability of structures and photophysical properties at molecular level. LCOFs are built to highly ordered and periodic 2D or 3D framework structures through covalently assembling with various luminophore building blocks. Recently, the advantages of LCOFs including predesigned properties of structure, unique photoluminescence, hypotoxicity and good biocompatibility and tumor penetration, broaden their applications in biorelated fields, such as biosensing, bioimaging, and drug delivery. A specific review that analyses the advances of LCOFs in the field of biosensing and bioimaging is thus urged to emerge. Here the construction of LCOFs is reviewed first. The synthetic chemistry of LCOFs highlights the key role of chemical linkages, which not only concrete the building blocks but also affect the optical properties and even can act as the responsive sites for potential sensing applications. How to brighten LCOFs are clarified through description of structure managements. The ability to utilize the luminescence of LCOFs for applications in biosensing and bioimaging is discussed using state-of-the-art examples of varied practical goals. A prospect finally addresses opportunities and challenges the development of LCOFs facing from chemistry, physics to the applications, according to their current progress.

Conjugated Polymers for Biomedical Applications

Conjugated polymers (CPs) are a series of organic semiconductor materials with large π-conjugated backbones and delocalized electronic structures. Due to their specific photophysical properties and photoelectric effects, plenty of CPs...

Conjugated Polymers: Optical Toolbox for Bioimaging and Cancer Therapy

Conjugated polymers (CPs) are capable of coordinating the electron coupling phenomenon to bestow powerful optoelectronic features. The light-harvesting and light-amplifying properties of CPs are extensively used in figuring out the biomedical issues with special emphasis on accurate diagnosis, effective treatment, and precise theranostics. This review summarizes the recent progress of CP materials in bioimaging, cancer therapeutics, and introduces the design strategies by rationally tuning the optical properties. The recent advances of CPs in bioimaging applications are first summarized and the challenges to clear the future directions of CPs in the respective area are discussed. In the following sections, the focus is on the burgeoning applications of CPs in phototherapy of the tumor, and illustrates the underlying photo-transforming mechanism for further molecular designing. Besides, the recent progress in the CPs-assistant drug therapy, mainly including drug delivery, gene therapeutic, the optical-activated reversion of tumor resistance, and synergistic therapy has also been discussed elaborately. In the end, the potential challenges and future developments of CPs on cancer diagnosis and therapy are also illuminated for the improvement of optical functionalization and the promotion of clinical translation.

Emerging intraoral biosensors

Biomedical devices that involved continuous and real-time health-care monitoring have drawn much attention in modern medicine, of which skin electronics and implantable devices are widely investigated. Skin electronics are characterized for their non-invasive access to the physiological signals, and implantable devices are superior at the diagnosis and therapy integration. Despite the significant progress achieved, many gaps remain to be explored to provide a more comprehensive overview of human health. As the connecting point of the outer environment and human systems, the oral cavity contains many unique biomarkers that are absent in skin or inner organs, and hence, this could become a promising alternative locus for designing health-care monitoring devices. In this review, we outline the status of the oral cavity during the communication of the environment and human systems and compare the intraoral devices with skin electronics and implantable devices from the biophysical and biochemical aspects. We further summarize the established diagnosis database and technologies that could be adopted to design intraoral biosensors. Finally, the challenges and potential opportunities for intraoral biosensors are discussed. Intraoral biosensors could become an important complement for existing biomedical devices to constitute a more reliable health-care monitoring system.

Different Surface Interactions between Fluorescent Conjugated Polymers and Biological Targets

Fluorescent conjugated polymers (CPs) have attracted considerable interest in biosensing owing to their high fluorescence, tunable bandgap, and good biocompatibility. Aiming at acquiring the desired optical responses of CPs for bioapplications, it is essential that the CPs bind to biological targets with high efficacy and affinity. However, the efficient binding of CPs is largely driven by their effective interaction with target surfaces. In this Review, we will focus on the different surface interactions that pervade between CPs and biological targets. The multiple surface interactions can lead to changes in spatial conformation and distribution of CPs, which manifest alterable optical properties of CPs based on accumulation of target-directed CPs, Förster resonance energy transfer mechanism, and metal-enhanced fluorescence mechanism. Then, we display diverse bioapplications applying CPs-based surface interactions, such as cell imaging, imaging-guided detection, and photodynamic therapy. Finally, the challenges and future developments to control the efficient attachment of CPs to biological targets are discussed. We expect that the understanding of surface interactions between CPs and biological targets benefits the CPs-based system design and expands their applications in biological detections and therapies.

Recent advances in semiconducting polymer dots as optical probes for biosensing

This review mainly summarized the recent results that used bright polymer dots (Pdots) for the detection of different analytes such as reactive oxygen species (ROS), metal ions, pH values, and a variety of biomolecules.

Binding Mode Multiplicity and Multiscale Chirality in the Supramolecular Assembly of DNA and a π-Conjugated Polymer

Water-soluble π-conjugated polymers are increasingly considered for DNA biosensing. However, the conformational rearrangement, supramolecular organization and dynamics upon interaction with DNA have been overlooked, which prevents the rational design of such detection tools. To elucidate the binding of a cationic polythiophene (CPT) to DNA with atomistic resolution, we performed molecular simulations of their supramolecular assembly. Comparison of replicated simulations show a multiplicity of CPT binding geometries that contribute to the wrapping of CPT around DNA. The different binding geometries are stabilized by both electrostatic interactions between CPT lateral cations and DNA phosphodiesters and van der Waals interactions between the CPT backbone and the DNA grooves. Simulated circular dichroism (CD) spectra show that the induced CD signal stems from a conserved geometrical feature across the replicated simulations, i. e. the presence of segments of syn configurations between thiophene units along the CPT chain. At the macromolecular scale, we inspected the different shapes related to the CPT binding modes around the DNA through symmetry metrics. Altogether, molecular dynamics (MD) simulations, model Hamiltonian calculations of the CD spectra, and symmetry indices provide insights into the origin of induced chirality from the atomic to the macromolecular scale. Our multidisciplinary approach points out the hierarchical aspect of CPT chiral organization induced by DNA.

Ion-selective reversing aggregation-caused quenching - Maximizing optodes signal stability

An alternative optical signal transduction mechanism for ion-selective optodes is proposed. The nanostructural sensors benefit from ion-selective reversing aggregation caused quenching yielding turn-on, bright and highly stable optical signals. Selective incorporation of analyte results in transformation of the polymer dye from aggregate to a micelle structure, affecting spatial arrangement of chromophore groups in the nanostructure. Formation of micelles, induced by ion-selective interactions, is coupled with pronounced increase of emission due to decrease of aggregation caused quenching, characteristic for dispersed phase formation. The formed micelles are highly stable in solution, offering constant in time (days scale) emission signal. The important difference from other known systems is that the analyte binding induced change does not affect the chromophore group, but occurs in distant, terminal position of the side chain of the polymer. As a model system calcium selective optodes have been prepared. Thus obtained probes were characterized with broad analyte concentration range (from 10^-7 to 10^-3 M) emission signal increase. The turn-on response was observed within broad range of pH (6.3-8.9), with no sign of optical signal deterioration during 5 days contact with the analyte or more than two weeks storage.

Biofunctionalization of Water-Soluble poly(Phenylene Ethynylene)s

We report the use of amide coupling chemistry to covalently link five different biofunctional groups onto an anionic water-soluble poly(phenylene ethynylene) (PPE) polymer. Two of the biofunctionalized PPEs are used in prototype applications, including pH sensing and flow cytometry labeling. The PPE is functionalized with carboxylate (R-CO2-) and sulfonate (R-SO3-) ionic groups. By using an activated ester, the amine-functionalized groups are covalently linked to the PPE polymer via amide linkages. The reaction chemistry is optimized using biotin-ethylene diamine, making it possible to control the loading of the biotin functionality on the PPE chains. Using the optimized approach, a family of five PPEs were prepared that contain biotin, rhodamine, cholesterol, mannose, or folic acid moieties appended to the polymer backbones. The rhodamine- and biotin-modified PPEs were further applied for pH response and flow cytometry applications. The reported approach can be utilized for other classes of water-soluble conjugated polymers, allowing facile development of a variety of new functionalized water-soluble conjugated polymers for a range of applications including sensing, bioimaging, and flow cytometry analysis.

Self-Assembly of a Dual-Targeting and Self-Calibrating Ratiometric Polymer Nanoprobe for Accurate Hypochlorous Acid Imaging

Exploiting an intelligent fluorescent probe, which can precisely target to the lysosome of hepatoma cells and enable accurate molecular imaging, is a key challenge in hepatoma diagnoses. Herein, a single-dye-based polymer nanoprobe (named SPN) with dual-targeting and self-calibrating ratiometric characteristics is rationally fabricated via a simple self-assembly strategy for accurate hypochlorous acid (HClO) imaging in the lysosome of HepG2 cells. Of note, the covalent incorporation of self-calibrating ratiometric fluorophore (pyrene derivatives) into the core of polymer nanoparticles can not only validly avoid the leakage of fluorophores but also greatly enhance their brightness. Besides, this polymer nanoprobe (SPN) displays high water dispersibility, ultrafast response (<1s), favorable selectivity, outstanding long-term stability (>90 days), and good biocompatibility. Furthermore, thanks to the hepatocyte-targeting moiety (galactose) and the interplay of surface charge and size of nanoparticles, the SPN is able to enter into asialoglycoprotein receptor-positive HepG2 cells and further locate at lysosomes, successfully enabling accurate HClO detection in lysosomes of HepG2 cells. This study demonstrates that the versatile SPN can provide more precise dual-targeting and accurate molecular imaging.

Novel pyrene-pyridine oligomer nanorods for super-sensitive fluorescent detection of Pd2

Conjugated polymers (CPs) can be fabricated into conjugated polymer nanoparticles of various shapes, thus tuning the hydrophobicity and sensing performances of the parent polymers. Herein, two new hydrophobic oligomeric CPs containing pyrene-pyridyl moieties, P1 and P2, were directly prepared and conveniently converted into hydrophilic nanorods, i.e. P1NRs and P2NRs (about 4-21 and 6-20 nm in diameter), by a modified microemulsion method. Notably, separated P1NRs exhibit excellent stability while P2NRs tend to stack on each other perhaps due to their different rigidity of π-delocalized backbones, which may have a profound effect on their fluorescence properties. In addition, Pd²⁺ can coordinate with the pyridyl N atoms, thereby causing ultrasensitive fluorescence quenching of P1NRs and P2NRs owing to the aggregation of oligomeric CP nanorods. These two simple nanosensors can help to determine Pd²⁺ with detection limits as low as 1 and 70 nM, respectively. It is worth noting that biocompatible P1NRs with bright blue fluorescence can be employed for efficient imaging of trace level Pd²⁺ ions in live cells.

Luminescent probes for hypochlorous acid in vitro and in vivo

HClO/ClO^- is the most effective antibacterial active oxygen in neutrophils. However, its excessive existence often leads to the destruction of human physiological mechanisms. In recent years, the developed luminescent probes for the detection of HClO/ClO^- are not only conducive to improve the sensitivity and selectivity of HClO/ClO^- detection, but also play a crucial role in understanding the biological functions of HClO/ClO^-. In addition, luminescent probe-based biological imaging for HClO/ClO^- at sub-cellular resolution has become a powerful tool for biopathology and medical diagnostic research. This article reviews a variety of luminescent probes for the detection of HClO/ClO^-in vitro and in vivo with different design principles and mechanisms, including fluorescence, phosphorescence, and chemiluminescence. The photophysical/chemical properties and biological applications of these luminescent probes were outlined. Finally, we summarized the merits and demerits of the developed luminescent probes and discussed their challenges and future development trends. It is hoped that this review can provide some inspiration for the development of luminescent probe-based strategies and to promote the further research of biomedical luminescent probes for HClO/ClO^-.

Synthesis and Characterization of a 2,3-Dialkoxynaphthalene-Based Conjugated Copolymer via Direct Arylation Polymerization (DAP) for Organic Electronics

Poly[(5,5'-(2,3-bis(2-ethylhexyloxy)naphthalene-1,4-diyl)bis(thiophene-2,2'-diyl))-alt-(2,1,3-benzothiadiazole-4,7-diyl)] (PEHONDTBT) was synthesized for the first time and through direct arylation polymerization (DAP) for use as p-donor material in organic solar cells. Optimized reaction protocol leads to a donor-acceptor conjugated polymer in good yield, with less structural defects than its analog obtained from Suzuki polycondensation, and with similar or even higher molecular weight than other previously reported polymers based on the 2,3-dialkoxynaphthalene monomer. The batch-to-batch repeatability of the optimized DAP conditions for the synthesis of PEHONDTBT was proved, showing the robustness of the synthetic strategy. The structure of PEHONDTBT was corroborated by NMR, exhibiting good solubility in common organic solvents, good film-forming ability, and thermal stability. PEHONDTBT film presented an absorption band centered at 498 nm, a band gap of 2.15 eV, and HOMO and LUMO energy levels of -5.31 eV and -3.17 eV, respectively. Theoretical calculations were performed to understand the regioselectivity in the synthesis of PEHONDTBT and to rationalize its optoelectronic properties. Bilayer heterojunction organic photovoltaic devices with PEHONDTBT as the donor layer were fabricated to test their photovoltaic performance, affording low power-conversion efficiency in the preliminary studies.

Rational design of semiconducting polymer brushes as cancer theranostics

Photonic theranostics (PTs) generally contain optical agents for the optical sensing of biomolecules and therapeutic components for converting light into heat or chemical energy. Semiconducting polymer nanoparticles (SPNs) as advanced PTs possessing good biocompatibility, stable photophysical properties, and sensitive and tunable optical responses from the ultraviolet to near-infrared (NIR) II window (300-1700 nm) have recently aroused great interest. Although semiconducting polymers (SPs) with various building blocks have been synthesized and developed to meet the demands of biophotonic applications, most of the SPNs were made by a nanoprecipitation method that used amphiphilic surfactants to encapsulate SPs. Such binary SP micelles usually exhibit weakened photophysical properties of SPs and undergo dissociation in vivo. SP brushes (SPBs) are products of functional post-modification of SP backbones, which endows unique features to SPNs (e.g. enhanced optical properties and multiple chemical reaction sites for the conjunction of organic/inorganic imaging agents and therapeutics). Furthermore, the SPB-based SPNs can be highly stable due to supramolecular self-assembly and/or chemical crosslinking. In this review, we highlight the recent progress in the development of SPBs for advanced theranostics.

Mechanically Induced Conformation Change, Fluorescence Modulation, and Mechanically Assisted Photodegradation in Single Nanoparticles of the Conjugated Polymer Poly(9,9-dioctylfluorene)

We explored the possibility of nanoscale mechanical manipulation and control of photophysical properties of conjugated polymer nanoparticles. We carried out a simultaneous atomic force microscopy (AFM) and fluorescence microspectroscopy study on single nanoparticles of the conjugated polymer poly(9,9-dioctylfluorene). The nanoparticles are prepared by a reprecipitation method and have an average height of 27 nm, and their emission is dominated by the well-ordered β-phase conformation. Fluorescence polarization anisotropy and numerical simulations show that each particle contains at least three partly oriented straight β-phase segments surrounded by amorphous glass-phase polyfluorene chains. In the simultaneous experiments, an AFM tip was used to apply external force on a single nanoparticle, and a confocal fluorescence microscope was used to monitor in real time the resulting changes in the fluorescence intensity and spectra. In a nitrogen atmosphere, weak to moderate force of up to 1 μN acts mainly on the glass-phase polyfluorene chains by forming quenchers that cause an efficient and reversible fluorescence decrease, whereas the β-phase segments stay unaffected. A higher force of 5 μN, on the contrary, breaks the β-phase segments into multiple glass-phase segments, causing a net increase in fluorescence intensity. Under ambient air conditions, even a moderate force of 1 μN strongly accelerates the degradation of the nanoparticle by preferably photobleaching the β-phase and partially transforming it into the glass phase. These results will contribute to the fundamental knowledge on the relationship between photophysical and structural properties of polyfluorene nanostructures, and will also provide important feedback for potential applications of such nanostructures in flexible optoelectronic devices.

Engineered Near-Infrared Fluorescent Protein Assemblies for Robust Bioimaging and Therapeutic Applications

Fluorescent proteins are investigated extensively as markers for the imaging of cells and tissues that are treated by gene transfection. However, limited transfection efficiency and lack of targeting restrict the clinical application of this method rooted in the challenging development of robust fluorescent proteins for in vivo bioimaging. To address this, a new type of near-infrared (NIR) fluorescent protein assemblies manufactured by genetic engineering is presented. Due to the formation of well-defined nanoparticles and spectral operation within the phototherapeutic window, the NIR protein aggregates allow stable and specific tumor imaging via simple exogenous injection. Importantly, in vivo tumor metastases are tracked and this overcomes the limitations of in vivo imaging that can only be implemented relying on the gene transfection of fluorescent proteins. Concomitantly, the efficient loading of hydrophobic drugs into the protein nanoparticles is demonstrated facilitating the therapy of tumors in a mouse model. It is believed that these theranostic NIR fluorescent protein assemblies, hence, show great potential for the in vivo detection and therapy of cancer.

Water-Soluble NIR Absorbing and Emitting Indolizine Cyanine and Indolizine Squaraine Dyes for Biological Imaging

Organic dyes that absorb and emit in the near-infrared (NIR) region are potentially noninvasive, high-resolution, and rapid biological imaging materials. Indolizine donor-based cyanine and squaraine dyes with water-solubilizing sulfonate groups were targeted in this study due to strong absorptions and emissions in the NIR region. As previously observed for nonwater-soluble derivatives, the indolizine group with water-solubilizing groups retains a substantial shift toward longer wavelengths for both absorption and emission with squaraines and cyanines relative to classically researched indoline donor analogues. Very high quantum yields (as much as 58%) have been observed with absorption and emission >700 nm in fetal bovine serum. Photostability studies, cell culture cytotoxicity, and cell uptake specificity profiles were all studied for these dyes, demonstrating exceptional biological imaging suitability.