Copper nanoparticles as inexpensive and efficient catalyst: A valuable contribution in organic synthesis

The Preparation of an Ultrafine Copper Powder by the Hydrogen Reduction of an Ultrafine Copper Oxide Powder and Reduction Kinetics

Ultrafine copper powders were prepared by the air-jet milling of copper oxide (CuO) powders and a subsequent hydrogen (H2) reduction. After milling, the particle size and grain size of CuO powders decreased, while the specific surface area and structural microstrain increased, thereby improving the reaction activity. In a pure H2 atmosphere, the process of CuO reduction was conducted in one step, and followed a pseudo-first-order kinetics model. The smaller CuO powders after milling exhibited higher reduction rates and lower activation energies compared with those without milling. Based on the unreacted shrinking core model, the reduction of CuO powders via H2 was controlled by the interface reaction at the early stage, whereas the latter was limited by the diffusion of H2 through the solid product layer. Additionally, the scanning electron microscopy (SEM) indicated that copper powders after H2 reduction presented a spherical-like shape, and the sintering and agglomeration between particles occurred after 300 °C, which led to a moderate increase in particle size. The preparing parameters (at 400 °C for 180 min) were preferred to obtain ultrafine copper powders with an average particle size in the range of 5.43-6.72 μm and an oxygen content of less than 0.2 wt.%.

Recent Advances in Electrocatalytic Hydrogenation Reactions on Copper-Based Catalysts

Hydrogenation reactions play a critical role in the synthesis of value-added products within the chemical industry. Electrocatalytic hydrogenation (ECH) using water as the hydrogen source has emerged as an alternative to conventional thermocatalytic processes for sustainable and decentralized chemical synthesis under mild conditions. Among the various ECH catalysts, copper-based (Cu-based) nanomaterials are promising candidates due to their earth-abundance, unique electronic structure, versatility, and high activity/selectivity. Herein, recent advances in the application of Cu-based catalysts in ECH reactions for the upgrading of valuable chemicals are systematically analyzed. The unique properties of Cu-based catalysts in ECH are initially introduced, followed by design strategies to enhance their activity and selectivity. Then, typical ECH reactions on Cu-based catalysts are presented in detail, including carbon dioxide reduction for multicarbon generation, alkyne-to-alkene conversion, selective aldehyde conversion, ammonia production from nitrogen-containing substances, and amine production from organic nitrogen compounds. In these catalysts, the role of catalyst composition and nanostructures toward different products is focused. The co-hydrogenation of two substrates (e.g., CO2 and NOx n, SO3 2-, etc.) via C─N, C─S, and C─C cross-coupling reactions are also highlighted. Finally, the critical issues and future perspectives of Cu-catalyzed ECH are proposed to accelerate the rational development of next-generation catalysts.

Divergent Geminal Alkynylation-Allylation and Acylation-Allylation of Carbenes: Evolution and Roles of Two Transition-Metal Catalysts

Cooperative bimetallic catalysis to access novel reactivities is a powerful strategy for reaction development in transition-metal-catalyzed chemistry. Particularly, elucidation of the evolution of two transition-metal catalysts and understanding their roles in dual catalysis are among the most fundamental goals for bimetallic catalysis. Herein, a novel three-component reaction of a terminal alkyne, a diazo ester, and an allylic carbonate was successfully developed via cooperative Cu/Rh catalysis with Xantphos as the ligand, providing a highly efficient strategy to access 1,5-enynes with an all-carbon quaternary center that can be used as immediate synthetic precursors for complex cyclic molecules. Notably, a Meyer-Schuster rearrangement was involved in the reactions using propargylic alcohols, resulting in an unprecedented acylation-allylation of carbenes. Mechanistic studies suggested that in the course of the reaction Cu(I) species might aggregate to some types of Cu clusters and nanoparticles (NPs), while the Rh(II)2 precursor can dissociate to mono-Rh species, wherein Cu NPs are proposed to be responsible for the alkynylation of carbenes and work in cooperation with Xantphos-coordinated dirhodium(II) or Rh(I)-catalyzed allylic alkylation.

CuAs2O4: Design, Hydrothermal Synthesis, Crystal Structure, Photocatalytic Dye Degradation, Hydrogen Evolution Reaction, Knoevenagel Condensation Reaction, and Thermal Studies

CuAs2O4 has been explored as a heterogeneous catalyst in the fields of photocatalysis, electrocatalysis, and solvent-free organic transformation reactions. The homogeneity has been successfully attained for the first time by designing a pH-assisted hydrothermal synthesis technique. Single-crystal X-ray diffraction studies reveal that no phase transition has been observed by lowering the temperature up to 103 K with no existence of satellite reflections. The crystal structure exhibits tetragonal symmetry with space group P42/mbc and consists of [CuO6] octahedra and [AsO3E] tetrahedra (E represents the stereochemically active lone pair). Structural investigation shows a cylindrical void inside the structure, which could lead to interesting physical and chemical properties. The photocatalytic dye degradation efficiency with methylene blue (MB) showed ∼100% degradation, though the degradation efficiency increased by 2-fold with the addition of 6% H2O2. The reusability of the catalyst up to the 10th cycle with ∼35% MB dye degradation has been established. It can exhibit HER activity with a low overpotential of 165 mV with respect to RHE to attain the current density of j = 10 mA cm-2. SEM and TEM revealed rod-shaped particles, which supported the large number of catalytic active sites. The structural consistency of the catalyst after photodegradation and HER studies is confirmed by the PXRD pattern. XPS confirms the oxidation state of Cu and As in the compound. The catalytic activity toward the Knoevenagel condensation reaction at moderate temperature under solvent-free condition is also studied. TG-DTA shows an endothermic minimum (Tmin) at 436 °C due to the mass loss of As2O3.

Plant mediated synthesis of flower-like Cu2O microbeads from Artimisia campestris L. extract for the catalyzed synthesis of 1,4-disubstituted 1,2,3-triazole derivatives

This study presents a novel method for synthesizing 1,4-disubstituted 1,2,3-triazole derivatives through a one-pot, multi-component addition reaction using flower-like Cu2O microbeads as a catalyst. The flower-like Cu2O microbeads were synthesized using an aqueous extract of Artimisia Campestris L. This extract demonstrated the capability to reduce and stabilize Cu2O particles during their initial formation, resulting in the formation of a porous flower-like morphology. These Cu2O microbeads exhibit distinctive features, including a cubic close-packed (ccp) crystal structure with an average crystallite size of 22.8 nm, bandgap energy of 2.7 eV and a particle size of 6 µm. Their catalytic activity in synthesizing 1,4-disubstituted 1,2,3-triazole derivatives was investigated through systematic exploration of key parameters such as catalyst quantity (1, 5, 10, 15, 20, and 30 mg/mL), solvent type (dimethylformamide/H2O, ethanol/H2O, dichloromethane/H2O, chloroform, acetone, and dimethyl sulfoxide), and catalyst reusability (four cycles). The Cu2O microbeads significantly increased the product yield from 20% to 85.3%. The green synthesis and outstanding catalytic attributes make these flower-like Cu2O microbeads promising, efficient, and recyclable catalysts for sustainable and effective chemical transformations.

Reduced Tiara-like Palladium Complex for Suzuki Cross-Coupling Reactions

The design of highly active and structurally well-defined catalysts has become a crucial issue for heterogeneous catalysed reactions while reducing the amount of catalyst employed. Beside conventional synthetic routes, the employment of polynuclear transition metal complexes as catalysts or catalyst precursors has progressively intercepted a growing interest. These well-defined species promise to deliver catalytic systems where a strict control on the nuclearity allows to improve the catalytic performance while reducing the active phase loading. This study describes the development of a highly active and reusable palladium-based catalyst on alumina (Pd8 /Al2 O3 ) for Suzuki cross-coupling reactions. An octanuclear tiara-like palladium complex was selected as active phase precursor to give isolated Pd-clusters of ca. 1 nm in size on Al2 O3 . The catalyst was thoroughly characterised by several complementary techniques to assess its structural and chemical nature. The high specific activity of the catalyst has allowed to carry out the cross-coupling reaction in 30 min using only 0.12 mol % of Pd loading under very mild and green reaction conditions. Screening of various substrates and selectivity tests, combined with recycling and benchmarking experiments, have been used to highlight the great potentialities of this new Pd8 /Al2 O3 catalyst.

Reusable nano-catalyzed green protocols for the synthesis of quinoxalines: an overview

Heterocyclic compounds are very widely distributed in nature and are essential for life activities. They play a vital role in the metabolism of all living cells, for example, vitamins and co-enzyme precursors thiamine, riboflavin etc. Quinoxalines are a class of N-heterocycles that are present in a variety of natural and synthetic compounds. The distinct pharmacological activities of quinoxalines have attracted medicinal chemists considerably over the past few decades. Quinoxaline-based compounds possess extensive potential applications as medicinal drugs, presently; more than fifteen drugs are available for the treatment of different diseases. Diverse synthetic protocols have been developed via a one-pot approach using efficient catalysts, reagents, and nano-composites/nanocatalysts etc. But the use of homogeneous and transition metal-based catalysts suffers some demerits such as low atom economy, recovery of catalysts, harsh reaction conditions, extended reaction period, expensive catalysts, the formation of by-products, and unsatisfactory yield of products as well as toxic solvents. These drawbacks have shifted the attention of chemists/researchers to develop green and efficient protocols for synthesizing quinoxaline derivatives. In this context, many efficient methods have been developed for the synthesis of quinoxalines using nanocatalysts or nanostructures. In this review, we have summarized the recent progress (till 2023) in the nano-catalyzed synthesis of quinoxalines using condensation of o-phenylenediamine with diketone/other reagents with plausible mechanistic details. With this review, we hope that some more efficient ways of synthesizing quinoxalines can be developed by synthetic chemists.

Immobilized Cu(0) nanoparticles on montmorillonite-modified with benzalkonium chloride (MMT-BAC@Cu(0)): as an eco-friendly and proficient heterogeneous nano-catalyst for green synthesis of 5-substituted 1H-tetrazoles

In this study, Cu(0) nanoparticles supported on organo-modified montmorillonite with benzalkonium chloride (MMT-BAC@Cu(0)) were synthesized and used as an eco-friendly and green heterogeneous catalyst for the synthesis of 5-substituted 1H-tetrazoles in mild media. The structure of the catalyst was investigated using various techniques including XRD, EDX, ICP, TEM, FE-SEM, and FT-IR. The advantages of availability, low cost, non-toxicity, and biocompatibility of clay were our focus in synthesizing this nanoclay catalyst. The method's advantages include good to excellent product yields, mild conditions, easy work-up, short reaction times, and easy reuse of the nanocatalyst.

Specificity of Penicillin Acylases in Deprotection of N-Benzyloxycarbonyl Derivatives of Amino Acids

Changes in the structure of the N-acyl group in N-acylated amino acid derivatives significantly affect both the recognition and activity of penicillin acylases on this series of substrates. However, penicillin acylases from both Alcaligenes faecalis and Escherichia coli are capable of removing the N-benzyloxycarbonyl protecting group in amino acid derivatives under mild conditions without the use of toxic reagents. Efficiency in using penicillin acylases in preparative organic synthesis can be improved by utilizing modern rational enzyme design methods.

The Synthesis of 2,2-BIS(1-INDOL-3-YL)Acenaphthylene-1(2)-Ones Using Nanocatalysis: Fluorescent Sensing for Cu2+ Ions

2,2-bis(1H-indol-3-yl)acenaphthylene-1(2H)-ones were synthesised by the reaction of acenaphthenequinone and 2 equivalents of indole using Fe3O4@SiO2@Si-Pr-NH-CH2CH2NH2 as the basic magnetic nanocatalyst, assembled under greener and sustainable conditions in high purity and yields. Furthermore, the photoluminescence properties of 2,2-bis(2-methyl-1H-indol-3-yl)acenaphthylene-1(2H)-one were exploited for the sensing of copper ions in the mixed solvent systems comprising H2O and CH3CN in excitation wavelength at 410 nm with a detection limit of 9.5 ∙ 10–6 M.

Facile Synthesis of Copper-Coated-Reduced-Graphene-Oxide and Its Application as a Highly Sensitive Electrochemical Sensor for Hydroquinone

A facile step-by-step approach for synthesizing copper nanoparticles (CuNPs) loaded on the wrinkled surface of reduced-graphene-oxide (Cu/rGO) was conducted using a reductant at room temperature. Multiple characterization methods were applied to specify the morphology and composition of the nanocomposites. The scanning electron microscope and transmission electron microscope of Cu/rGO show that spherical CuNps were dispersed uniformly on the surface of rGO. In addition, the characteristic peaks of Cu and carbon in energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy analyses spectra proved that Cu/rGO nanocomposites were synthesized. Soon afterwards, a new hydroquinone electrochemical sensor was prepared with Cu/rGO and a glassy carbon electrode. The sensor was characterized by cyclic voltammetry and electrochemical impedance spectroscopy. Hydroquinone was detected by differential pulse voltammetry using the composite electrode. Under the optimal condition, the linear response range was from 0.05 μM to 90 μM; the detection limit is 0.02 μM (S/N = 3) for hydroquinone. The electrochemical sensor exhibited high sensitivity in practical environmental water sample detection.

Nanoscale zerovalent copper (nZVC) catalyzed environmental remediation of organic and inorganic contaminants: A review

Over the past decade, the nano zerovalent copper has emerged as an effective nano-catalyst for the environment remediation processes due to its ease of synthesis, low cost, controllable particle size and high reactivity despite its release during the remediation process and related concentration dependent toxicities. However, the improvised techniques involving the use of supports or immobilizer for the synthesis of Cu⁰ has significantly increased its stability and motivated the researchers to explore the applicability of Cu⁰ for the environment remediation processes, which is evident from access to numerous reports on nano zerovalent copper mediated remediation of contaminants. Initially, this review allows the understanding of the various resources used to synthesize zerovalent copper nanomaterial and the structure of Cu⁰ nanoparticles, followed by focus on the reaction mechanism and the species involved in the contaminant remediation process. The studies comprehensively presented the application of nano zerovalent copper for remediation of organic/inorganic contaminants in combination with various oxidizing and reducing agents under oxic and anoxic conditions. Further, it was evaluated that the immobilizers or support combined with various irradiation sources originates a synergistic effect and have a significant effect on the stability and the redox properties of nZVC in the remediation process. Therefore, the review proposed that the future scope of research should include rigorous focus on deriving an exact mechanism for synergistic effect for the removal of contaminants by supported nZVC.

Engineering of Oxide Protected Gold Nanoparticles

Gold nanoparticles that are partially or fully covered by metal oxide shells provide superior functionality and stability for catalytic and plasmonic applications. Yet, facile methods for controlled fabrication of thin oxide layers on metal nanoparticles are lacking. Here, we report an easy method to reliably engineer thin Ga₂O₃ shells on Au nanoparticles, based on liquid-phase chemical oxidation of Au-Ga alloy nanoparticles. We demonstrate that, with this technique, laminar and ultrathin Ga₂O₃ shells can be grown with ranging thickness from sub- to several monolayers. We show how the localized surface plasmon resonance can be used to understand the reaction process and quantitatively monitor the Ga₂O₃ shell growth. Finally, we demonstrate that the Ga₂O₃ coating prevents sintering of the Au nanoparticles, providing thermal stability to at least 250 °C. This approach, building on dealloying of bimetallic nanoparticles by the solution-phase oxidation, promises a general technique for achieving controlled metal/oxide core/shell nanoparticles.

Surface‐Plasmon‐Enhanced Transmetalation between Copper and Palladium Nanoparticle Catalyst

Surface‐plasmon‐mediated phenylacetylide intermediate transfer from the Cu to the Pd surface affords a novel mechanism for transmetalation, enabling wavelength‐tunable cross‐coupling and homo‐coupling reaction pathway control. C−C bond forming Sonogashira coupling and Glaser coupling reactions in O₂ atmosphere are efficiently driven by visible light over heterogeneous Cu and Pd nanoparticles as a mixed catalyst without base or other additives. The reaction pathway can be controlled by switching the excitation wavelength. Shorter wavelengths (400–500 nm) give the Glaser homo‐coupling diyne, whereas longer wavelength irradiation (500–940 nm) significantly increases the degree of cross‐coupling Sonogashira coupling products. The ratio of the activated intermediates of alkyne to the iodobenzene is wavelength dependent and this regulates transmetalation. This wavelength‐tunable reaction pathway is a novel way to optimize the product selectivity in important organic syntheses.

An efficient CuO/rGO/TiO2 photocatalyst for the synthesis of benzopyranopyrimidine compounds under visible light irradiation

This study reports the synthesis of CuO/rGO/TiO2 in coupling reaction under visible light irradiation. Its photocatalytic performance was explored in a pseudo 4-component and a domino reaction for the synthesis of benzopyranopyrimidine compounds. It can be recovered and recycled for 5 runs.

Copper supported silica-based nanocatalysts for CuAAC and cross-coupling reactions

Recent advances in Cu/SiO2-based heterogeneous catalysts for click reaction, C–N, C–S, and C–O coupling reactions are reviewed and summarized.

Green synthesis of submicron copper powder with narrow particle size distribution via a simple methanol thermal reduction

In this work, submicron copper powder with narrow particle size distribution was synthesized via a simple methanol thermal reduction method without using any surfactants. Smaller copper powder with narrower particle size distribution could be realized by increasing the reaction temperature. Submicron copper powder with an average particle size of 206.6 nm and a particle size distribution of 100-300 nm could be obtained when the reaction temperature was 200 °C. Methyl formate was the only organic product found in the reaction. No organic products could be realized when the reaction temperature increased to 180 °C and above, which was environmentally friendly and was conducive to the subsequent copper powder extraction and washing. The synthesis of submicron copper powder via methanol thermal reduction was found to be a top-down process, which was beneficial for ultrafine copper powder production via wet chemical approaches.

Mild Microfluidic Approaches to Oxide Nanoparticles Synthesis

Oxide nanoparticles (oxide NPs) are advanced materials with a wide variety of applications in different fields. The use of continuous flow methods is particularly appealing for their synthesis due to the high control achieved over the reaction conditions and the easy process scalability. The present review focuses on the preparation of oxide NPs using microfluidic setups at low temperature (≤80 °C), since the employment of mild reaction conditions is crucial for developing sustainable and cost-effective processes. A particular emphasis will be put on the improvement over the final product features (e. g., size, shape, and size distribution) given by flow methods with respect to conventional batch procedures. The main issues that arise by treating NPs suspensions in microfluidic systems are product deposition or channel clogging; mitigation strategies to overcome these drawbacks will also be presented and discussed.

Copper nanocatalysts applied in coupling reactions: a mechanistic insight

Copper-based nanocatalysts have seen great interest for use in synthetic applications since the early 20th century, as evidenced by the exponential number of contributions reported (since 2000, more than 48 000 works published out of about 81 300 since 1900; results from SciFinder using "copper nanocatalysts in organic synthesis" as keywords). These huge efforts are mainly based on two key aspects: (i) copper is an Earth-abundant metal with low toxicity, leading to inexpensive and eco-friendly catalytic materials; and (ii) copper can stabilize different oxidation states (0 to +3) for molecular and nanoparticle-based systems, which promotes different types of metal-reagent interactions. This chemical versatility allows different pathways, involving radical or ionic copper-based intermediates. Thus, copper-based nanoparticles have become convenient catalysts, in particular for couplings (both homo- and hetero-couplings), transformations that are involved in a remarkable number of processes affording organic compounds, which find interest in different fields (medicinal chemistry, natural products, drugs, materials, etc.). Clearly, this richness in reactivity makes understanding the mechanisms more complex. The present review focuses on the analysis of reported contributions using monometallic copper-based nanoparticles as catalytic precursors applied in coupling reactions, paying attention to those shedding light on the reaction mechanism.

Recent Progress of Metal Nanoparticle Catalysts for C–C Bond Forming Reactions

Over the past few decades, the use of transition metal nanoparticles (NPs) in catalysis has attracted much attention and their use in C–C bond forming reactions constitutes one of their most important applications. A huge variety of metal NPs, which have showed high catalytic activity for C–C bond forming reactions, have been developed up to now. Many kinds of stabilizers, such as inorganic materials, magnetically recoverable materials, porous materials, organic–inorganic composites, carbon materials, polymers, and surfactants have been utilized to develop metal NPs catalysts. This review classified and outlined the categories of metal NPs by the type of support.

Diorganyl diselenides: a powerful tool for the construction of selenium containing scaffolds

Organoselenium compounds find versatile applications in organic synthesis, materials synthesis, and ligand chemistry. Organoselenium heterocycles are widely studied agents with diverse applications in various biological processes. This review highlights the recent progress in the synthesis of selenium heterocycles using diorganyl diselenides with keen attention on green synthetic approaches, scopes, C-H selanylation, the mechanisms of different reactions and insights into the formation of metal complexes. The C-H selanylation using diorganyl diselenides with different catalysts, bases, transition metals, iodine salts, NIS, hypervalent iodine, and other reagents is summarised. Finally, the diverse binding modes of bis(2/4-pyridyl)diselenide with different metal complexes are also summarised.

Metal and Metal Oxide Nanoparticle as a Novel Antibiotic Carrier for the Direct Delivery of Antibiotics

In addition to the benefits, increasing the constant need for antibiotics has resulted in the development of antibiotic bacterial resistance over time. Antibiotic tolerance mainly evolves in these bacteria through efflux pumps and biofilms. Leading to its modern and profitable uses, emerging nanotechnology is a significant field of research that is considered as the most important scientific breakthrough in recent years. Metal nanoparticles as nanocarriers are currently attracting a lot of interest from scientists, because of their wide range of applications and higher compatibility with bioactive components. As a consequence of their ability to inhibit the growth of bacteria, nanoparticles have been shown to have significant antibacterial, antifungal, antiviral, and antiparasitic efficacy in the battle against antibiotic resistance in microorganisms. As a result, this study covers bacterial tolerance to antibiotics, the antibacterial properties of various metal nanoparticles, their mechanisms, and the use of various metal and metal oxide nanoparticles as novel antibiotic carriers for direct antibiotic delivery.

Synthesis of Copper Nanoparticles from Cu2+-Spiked Wastewater via Adsorptive Separation and Subsequent Chemical Reduction

Copper in ionic form (Cu²⁺) should be removed from wastewater because of its harmful effects on human health. Meanwhile, Cu-metal nanoparticles (Cu⁰ NPs) are widely used in various applications such as catalysts, optical materials, sensors, and antibacterial agents. Here, we demonstrated the recovery of Cu²⁺ from wastewater and its subsequent transformation into Cu⁰ NPs, a value-added product, via continuous adsorption followed by chemical reduction by hydrazine. To separate and enrich Cu²⁺ from wastewater, a biosorbent that exhibits excellent selectivity and adsorption capacity toward Cu²⁺, i.e., polyethyleneimine-grafted cellulose nanofibril aerogel (PEI@CNF), was packed into a column and used to treat 20 mg/L Cu²⁺ wastewater at a flow rate of 5 mL/min. The Cu²⁺ adsorption reached equilibrium at 72 h, and the Cu²⁺-saturated column was eluted using 0.1 M of HCl. After five consecutive elutions of Cu²⁺ from the adsorbent column, a Cu²⁺-enriched solution with a concentration of 3212 mg/L was obtained. The recovered Cu²⁺ concentrate was chemically reduced to obtain Cu⁰ NPs by reaction with hydrazine as a reductant in the presence of sodium dodecyl sulfate (SDS) as a stabilizer. The solution pH and hydrazine/Cu²⁺ ratio strongly affected the reduction efficiency of Cu²⁺ ions. When 0.1 M of SDS was used, spherical 50–100 nm Cu⁰ NPs were obtained. The results demonstrate that Cu²⁺-spiked wastewater can be converted into Cu⁰ NPs as a value-added product via adsorption followed by chemical reduction.

Kombucha SCOBY Waste as a Catalyst Support

It is established that food waste can be repurposed to extend its lifecycle and decrease its carbon footprint. In this work, SCOBY (symbiotic culture of bacteria and yeast) waste from kombucha tea production has been repurposed as a catalyst support. Copper nanoparticles (Cu NPs) have been embedded in a piece of treated SCOBY via an in-situ method which enabled the catalyst, inCu/t-SCOBY, to be easily recycled. In addition, inCu/t-SCOBY catalyzed the full reduction of 4-nitrophenol in an excess of sodium borohydride (NaBH₄ ) within 20 minutes. After 6 additional catalytic cycles, the catalyst maintained up to 50% of its performance in the first cycle. Characterization of the catalyst has also been done to understand the mechanism of action and interactions occurring between t-SCOBY and Cu NPs. The results of this work clearly present a proof-of-concept in utilizing porous wastes materials such as SCOBY as catalyst supports, allowing metallic NPs to be efficacious and practical heterogenous catalysts.

Bimetallic Co/Zn zeolitic imidazolate framework ZIF-67 supported Cu nanoparticles: An excellent catalyst for reduction of synthetic dyes and nitroarenes

In this study, a sub-class of microporous crystalline metal organic frameworks (MOFs) with zeolite-like configurations, i.e., zeolitic imidazolate frameworks of single node ZIF-67 and binary nodes ZIF-Co/Zn are used as the supports to develop Cu nanoparticles based nanocatalysts. Their catalytic activities are comparatively evaluated where Cu(x)@ZIF-Co/Zn exhibits better performances than Cu(x)@ZIF-67 in the reduction of synthetic dyes and nitroarenes. For instance, the Cu(0.25)@ZIF-Co/Zn catalyst shows an excellent reaction rate of 2.088 × 10^-2 s^-1 and an outstanding activity of 104.4 s^-1g_cat^-1 for the reduction of methyl orange. The same catalyst also performs an exceptional catalytic activity in the hydrogenation of p-nitrophenol to p-aminophenol with the activity of 216.5 s^-1g_cat^-1. A synergistic role of unique electronic properties rising from the direct contact of Cu NPs with the bimetallic nodes ZIF-Co/Zn, higher surface area of support, appropriate Cu loading and maintainable microporous frameworks with higher thermal and hydrolytic stability collectively enhances the catalytic activity of Cu(x)@ZIF-Co/Zn. Moreover, this catalyst shows excellent stability and recyclability, which can retain high conversion after reuse for 10 cycles.

Preparation of Cu cluster catalysts by simultaneous cooling-microwave heating: application in radical cascade annulation

One of the hallmarks of microwave irradiation is its selective heating mechanism. In the past 30 years, alternative designs of chemical reactors have been introduced, where the microwave (MW) absorber occupies a limited reactor volume but the surrounding environment is MW transparent. This advantage results in a different heating profile or even the possibility to quickly cool down the system. Simultaneous cooling-microwave heating has been largely adopted for organic chemical transformations. However, to the best of our knowledge there are no reports of its application in the field of nanocluster synthesis. In this work, we propose an innovative one-pot procedure for the synthesis of Cu nanoclusters. The cluster nucleation was selectively MW-activated inside the pores of a highly ordered mesoporous substrate. Once the nucleation event occurred, the crystallization reaction was instantaneously quenched, precluding the growth events and favoring the production of Cu clusters with a homogenous size distribution. Herein, we demonstrated that Cu nanoclusters could be successfully adopted for radical cascade annulations of N-alkoxybenzamides, resulting in various tricyclic and tetracyclic isoquinolones, which are widely present in lots of natural products and bioactive compounds. Compared to reported homogeneous methods, supported Cu nanoclusters provide a better platform for a green, sustainable and efficient heterogeneous approach for the synthesis of tricyclic and tetracyclic isoquinolones, avoiding a variety of toxic waste/byproducts and metal contamination in the final products.

Copper(i) oxide nanoparticle-mediated C–C couplings for synthesis of polyphenylenediethynylenes: evidence for a homogeneous catalytic pathway

Polyphenylenediethynylenes have been synthesized using copper(i) oxide nanocatalysts under ligandless conditions, mild base, and atmospheric air as the oxidant in good yield and number average molecular weight.

Size-Controlled Transformation of Cu2O into Zero Valent Copper within the Matrix of Anion Exchangers via Green Chemical Reduction

Composite materials containing zero valent copper (ZVC) dispersed in the matrix of two commercially available strongly basic anion exchangers with a macroreticular (Amberlite IRA 900Cl) and gel-like (Amberlite IRA 402OH) structure were obtained. Cu0 particles appeared in the resin phase as the product of the reduction of the precursor, i.e., copper oxide(I) particles previously deposited in the two supporting materials. As a result of a one-step transformation of preformed Cu2O particles as templates conducted using green reductant ascorbic acid and under mild conditions, macroporous and gel-type hybrid products containing ZVC were obtained with a total copper content of 7.7 and 5.3 wt%, respectively. X-ray diffraction and FTIR spectroscopy confirmed the successful transformation of the starting oxide particles into a metallic deposit. A scanning electron microscopy study showed that the morphology of the deposit is mainly influenced by the type of matrix exchanger. In turn, the drying steps were crucial to its porosity and mechanical resistance. Because both the shape and size of copper particles and the internal structure of the supporting solid materials can have a decisive impact on the potential applications of the obtained materials, the results presented here reveal a great possibility for the design and synthesis of functional nanocrystalline solids.