Unadulterated BODIPY nanoparticles for biomedical applications

Dual-Functional AIE Fluorescent Probe for Visualization of Lipid Droplets and Photodynamic Therapy of Cancer

Abnormal lipid droplets (LDs) are known to be intimately bound with the occurrence and development of cancer, allowing LDs to be critical biomarkers for cancers. Aggregation-induced emission luminogens (AIEgens), with efficient reactive oxygen species (ROS) production performance, are prime photosensitizers (PSs) for photodynamic therapy (PDT) with imaging. Therefore, the development of dual-functional fluorescent probes with aggregation-induced emission (AIE) characteristics that enable both simultaneous LD monitoring and imaging-guided PDT is essential for concurrent cancer diagnosis and treatment. Herein, we reported the development of a novel LD-targeting fluorescent probe (TDTI) with AIE performance, which was expected to realize the integration of cancer diagnosis through LD visualization and cancer treatment via PDT. We demonstrated that TDTI, with typical AIE characteristics and excellent photostability, could target LDs with high specificity, which enables the dynamic tracking of LDs in living cells, specific imaging of LDs in zebrafish, and the differentiation of cancer cells from normal cells for cancer diagnosis. Meanwhile, TDTI exhibited fast ROS generation ability (achieving equilibrium within 60 s) under white light irradiation (10 mW/cm2). The cell apoptosis assay revealed that TDTI effectively induced growth inhibition and apoptosis of HeLa cells. Further, the results of PDT in vivo indicated that TDTI had a good antitumor effect on the tumor-bearing mice model. Collectively, these results highlight the potential utility of the dual-functional fluorescent probe TDTI in the integrated diagnosis and treatment of cancer.

Galactosyl BODIPY-based nanoparticles as a type-I photosensitizer for HepG2 cell targeted photodynamic therapy

We report a galactosyl diiodo-BODIPY-based nanoparticles as type-I photosensitizer (PS) with high water solubility for HepG2 cell targeted photodynamic therapy. Functionalized galactoside and glucoside were introduced into diiodo-BODIPY to obtain BP1 and BP2, respectively. The glycolyl PSs could self-assemble to form the nanoparticles BP1-NP and BP2-NP with red-shifted near-infrared (NIR) absorption and fluorescence at 682 nm and 780 nm, as well as excellent chemo- and photo-stability. In comparison to the monomer in DMSO, the aggregated photosensitizers in the nanoparticles enabled the sensitization of oxygen to superoxide (O2˙-) through a type-I process, while repressing the generation of singlet oxygen (1O2) through a type-II process. The galactosyl-modified BP1-NPs could target and concentrate on HepG2 cells, subsequently generating O2˙- and 1O2 to trigger cell death under 660 nm light irradiation. This work provides an efficient strategy for the construction of glycoside-recognized type-I photosensitizers for tumor cell imaging and photodynamic therapy.

Red fluorescent BODIPY-based nanoparticles for targeted cancer imaging-guided photodynamic therapy

Imaging-guided diagnosis and treatment of cancer hold potential to significantly improve therapeutic accuracies and efficacies. Central to this theragnostic approach has been the use of multicomponent-based multimodal nanoparticles (NPs). Apart from this conventional approach, here we propose a design strategy for the simple and straightforward formulation of NPs based on boron dipyrromethene (BODIPY) derivatives, LaB-X (X = H, Et, and Br). Specifically, the conjugation of lactose to the inherently hydrophobic BODIPY promoted the formation of LaB-X NPs in water. Furthermore, the BODIPY backbone was subjected to distyrylation, dibromination, and diethylation to tailor the optical window and the balance between fluorescence and singlet oxygen generation capabilities. We demonstrate that while the photoinduced anticancer activities of LaB-H and LaB-Et NPs were trivial, LaB-Br NPs effectively induced the apoptotic death of hepatocellular carcinoma cells under red light irradiation while allowing fluorescence cell imaging in the phototherapeutic window. This dual fluorescence photosensitizing activity of LaB-Br NPs could be switched off and on, so that both fluorescence and singlet oxygen generation were paused during NP formation in an aqueous solution, while both processes resumed after cellular uptake, likely due to NP disassembly.

Electrochemical Diselenation of BODIPY Fluorophores for Bioimaging Applications and Sensitization of 1 O2

We report a rapid, efficient, and scope-extensive approach for the late-stage electrochemical diselenation of BODIPYs. Photophysical analyses reveal red-shifted absorption - corroborated by TD-DFT and DLPNO-STEOM-CCSD computations - and color-tunable emission with large Stokes shifts in the selenium-containing derivatives compared to their precursors. In addition, due to the presence of the heavy Se atoms, competitive ISC generates triplet states which sensitize 1 O2 and display phosphorescence in PMMA films at RT and in a frozen glass matrix at 77 K. Importantly, the selenium-containing BODIPYs demonstrate the ability to selectively stain lipid droplets, exhibiting distinct fluorescence in both green and red channels. This work highlights the potential of electrochemistry as an efficient method for synthesizing unique emission-tunable fluorophores with broad-ranging applications in bioimaging and related fields.

Unveiling Liquid-Phase Exfoliation of Graphite and Boron Nitride Using Fluorescent Dyes Through Combined Experiments and Simulations

Liquid-phase exfoliation (LPE) in aqueous solutions provides a simple, scalable, and green approach to produce 2D materials. By combining atomistic simulations with exfoliation experiments, the interaction between a surfactant and a 2D layer at the molecular scale can be better understood. In this work, two different dyes, corresponding to rhodamine B base (Rbb) and to a phenylboronic acid BODIPY (PBA-BODIPY) derivative, are employed as dispersants to exfoliate graphene and hexagonal boron nitride (hBN) through sonication-assisted LPE. The exfoliated 2D sheets, mostly as few-layers, exhibit good quality and high loading of dyes. Using molecular dynamics (MD) simulations, the binding free energies are calculated and the arrangement of both dyes on the layers are predicted. It has been found that the dyes show a higher affinity toward hBN than graphene, which is consistent with the higher yields of exfoliated hBN. Furthermore, it is demonstrated that the adsorption behavior of Rbb molecules on graphene and hBN is quite different compared to PBA-BODIPY.

J-Aggregation Strategy toward Potentiated NIR-II Fluorescence Bioimaging of Molecular Fluorophores

Molecular fluorophores emitting in the second near-infrared (NIR-II, 1000-1700 nm) window with strong optical harvesting and high quantum yields hold great potential for in vivo deep-tissue bioimaging and high-resolution biosensing. Recently, J-aggregates are harnessed to engineer long-wavelength NIR-II emitters and show unique superiority in tumor detection, vessel mapping, surgical navigation, and phototheranostics due to their bathochromic-shifted optical bands in the required slip-stacked arrangement aggregation state. However, despite the preliminary progress of NIR-II J-aggregates and theoretical study of structure-property relationships, further paradigms of NIR-II J-aggregates remain scarce due to the lack of study on aggregated fluorophores with slip-stacked fashion. In this effort, how to utilize the specific molecular structure to form slip-stacked packing motifs with J-type aggregated exciton coupling is emphatically elucidated. First, several molecular regulating strategies to achieve NIR-II J-aggregates containing intermolecular interactions and external conditions are positively summarized and deeply analyzed. Then, the recent reports on J-aggregates for NIR-II bioimaging and theranostics are systematically summarized to provide a clear reference and direction for promoting the development of NIR-II organic fluorophores. Eventually, the prospective efforts on ameliorating and promoting NIR-II J-aggregates to further clinical practices are outlined.

Applications of supramolecular assemblies in drug delivery and photodynamic therapy

One of the world's serious health challenges is cancer. Anti-cancer agents delivered to normal cells and tissues pose several problems and challenges. In this connection, photodynamic therapy (PDT) is a minimally invasive therapeutic technique used for selectively destroying malignant cells while sparing the normal tissues. Development in photosensitisers (PSs) and light sources have to be made for PDT as a first option treatment for patients. In the pursuit of developing new attractive molecules and their formulations for PDT, researchers are working on developing such type of PSs that perform better than those being currently used. For the widespread clinical utilization of PDT, effective PSs are of particular importance. Host-guest interactions based on nanographene assemblies such as functionalized hexa-cata-hexabenzocoronenes, hexa-peri-hexabenzocoronenes and coronene have attracted increasing attention owing to less complicated synthetic steps and purification processes (gel permeation chromatography) during fabrication. Noncovalent interactions provide easy and facile approaches for building supramolecular PSs and enable them to have sensitive and controllable photoactivities, which are important for maximizing photodynamic effects and minimizing side effects. Various versatile supramolecular assemblies based on cyclodextrins, cucurbiturils, calixarenes, porphyrins and pillararenes have been designed in order to make PDT an effective therapeutic technique for curing cancer and tumours. The supramolecular assemblies of porphyrins display efficient electron transfer and fluorescence for use in bioimaging and PDT. The multifunctionalization of supramolecular assemblies is used for designing biomedically active PSs, which are helpful in PDT. It is anticipated that the development of these functionalized supramolecular assemblies will provide more fascinating advances in PDT and will dramatically expand the potential and possibilities in cancer treatments.

A Gas/phototheranostic Nanocomposite Integrates NIR-II-Peak Absorbing Aza-BODIPY with Thermal-Sensitive Nitric Oxide Donor for Atraumatic Osteosarcoma Therapy

Photothermal therapy (PTT) has received increasing interest in cancer therapeutics owing to its excellent efficacy and controllability. However, there are two major limitations in PTT applications, which are the tissue penetration depth of lasers within the absorption range of photothermal agents and the unavoidable tissue empyrosis induced by high-energy lasers. Herein, a gas/phototheranostic nanocomposite (NA1020-NO@PLX) is engineered that integrates the second near-infrared-peak (NIR-II-peak) absorbing aza-boron-dipyrromethenes (aza-BODIPY,NA1020) with the thermal-sensitive nitric oxide (NO) donor (S-nitroso-N-acetylpenicillamine, SNAP). An enhanced intramolecular charge transfer mechanism is proposed to achieve the NIR-II-peak absorbance (λmax = 1020 nm) on NA1020, thereby obtaining its deep tissue penetration depth. The NA1020 exhibits a remarkable photothermal conversion, making it feasible for the deep-tissue orthotopic osteosarcoma therapy and providing favorable NIR-II emission to precisely pinpoint the tumor for a visible PTT process. The simultaneously investigated atraumatic therapeutic process with an enhanced cell apoptosis mechanism indicates the feasibility of the synergistic NO/low-temperature PTT for osteosarcoma. Herein, this gas/phototheranostic strategy optimizes the existing PTT to present a repeatable and atraumatic photothermal therapeutic process for deep-tissue tumors, validating its potential clinical applications.

Choline phosphate lipid-hitchhiked near-infrared BODIPY nanoparticles for enhanced phototheranostics

Phototheranostics integrating optical imaging and phototherapy has attracted extensive attention. Achieving nanophototherapeutics with near infrared (NIR)-light synchronously triggered photodynamic therapy (PDT) and photothermal therapy (PTT) is challenging. Herein, we develop a multifunctional theranostic nanoplatform prepared from the co-assembly of NIR boron dipyrromethene (BODIPY) with a cooperative D-π-A structure of a thiophene-BODIPY core and benzene-diethylamino, and a choline phosphate lipid. The as-fabricated nanoparticles (DBNPs) exhibited desirable NIR absorption, uniform spherical morphology and good colloidal stability. The elaborate molecular design and supramolecular assembly endowed DBNPs with desirable PDT and PTT activities. Upon 808 nm laser irradiation, the DBNPs efficiently generated active singlet oxygen and regional hyperpyrexia, with a photothermal conversion efficiency of 37.6%. The excellent PDT and PTT performance of DBNPs boosted the potent in vitro and in vivo anti-tumor effects. In addition, these nanoparticles manifested their good capability of NIR fluorescence imaging of tumors. Overall, the DBNPs provide a paradigm for delivering hydrophobic phototherapy molecules with phospholipids for enhanced tumor treatment and imaging.

Exploring anticancer properties of novel Nano-Formulation of BODIPY Compound, Photophysicochemical, in vitro and in silico evaluations

A new BODIPY complex (C4) composed of meso- thienyl-pyridine substituted core unit diiodinated from 2- and 6- positions and distyryl moieties at 3- and 5- positions is synthesized. Nano-sized formulation of C4 is prepared by single emulsion method using poly(ε-caprolactone)(PCL) polymer. Encapsulation efficiency and loading capacity values of C4 loaded PCL nanoparticles (C4@PCL-NPs) are calculated and in vitro release profile of C4 is determined. The cytotoxicity and anti-cancer activity are conducted on the L929 and MCF-7 cell lines. Cellular uptake study is performed and interaction between C4@PCL-NPs and MCF-7 cell line is investigated. Anti-cancer activity of C4 is predicted with molecular docking studies and the inhibition property on EGFR, ERα, PR and mTOR are investigated for its anticancer properties. Molecular interactions, binding positions and docking score energies between C4 and EGFR, ERα, PR and mTOR targets are revealed using in silico methods. The druglikeness and pharmacokinetic properties of C4 are evaluated using the SwissADME and its bioavailability and toxicity profiles are assessed using the SwissADME, preADMET and pkCSM servers. In conclusion, the potential use of C4 as an anti-cancer agent is evaluated in vitro and in silico methods. Also, photophysicochemical properties are studied to investigate the potential of using Photodynamic Therapy (PDT). In photochemical studies, the calculated singlet oxygen quantum yield (Φ_Δ) value was 0.73 for C4 and in photopysical studies, the calculated fluorescence quantum yield Φ_F value was 0.19 for C4.

BODIPY as a Multifunctional Theranostic Reagent in Biomedicine: Self-Assembly, Properties, and Applications

The use of boron dipyrromethene (BODIPY) in biomedicine is reviewed. To open, its synthesis and regulatory strategies are summarized, and inspiring cutting-edge work in post-functionalization strategies is highlighted. A brief overview of assembly model of BODIPY is then provided: BODIPY is introduced as a promising building block for the formation of single- and multicomponent self-assembled systems, including nanostructures suitable for aqueous environments, thereby showing the great development potential of supramolecular assembly in biomedicine applications. The frontier progress of BODIPY in biomedical application is thereafter described, supported by examples of the frontiers of biomedical applications of BODIPY-containing smart materials: it mainly involves the application of materials based on BODIPY building blocks and their assemblies in fluorescence bioimaging, photoacoustic imaging, disease treatment including photodynamic therapy, photothermal therapy, and immunotherapy. Lastly, not only the current status of the BODIPY family in the biomedical field but also the challenges worth considering are summarized. At the same time, insights into the future development prospects of biomedically applicable BODIPY are provided.

Unadulterated BODIPY nanoparticles as light driven antibacterial agents for treating bacterial infections and promoting wound healing

Antimicrobial photodynamic therapy (aPDT) is an effective strategy to eliminate bacteria without inducing bacterial resistance. As typical aPDT photosensitizers, most of boron-dipyrromethene (BODIPY) are hydrophobic, and nanometerization is imperative to render them dispersible in physiological media. Recently, carrier-free nanoparticles (NPs) are formed via the self-assembly of BODIPYs without the help of any surfactants or auxiliaries, arousing people's interest. So as to fabricate carrier-free NPs, BODIPYs usually need to be derived into dimers, trimers, or amphiphiles through complex reactions. Few unadulterated NPs were obtained from BODIPYs with precise structures. Herein, BNP1-BNP3 were synthesized by the self-assembly of BODIPY, which showed excellent anti-Staphylococcus aureus ability. Among them, BNP2 could effectively fight bacterial infections and promote wound healing in vivo.

Glycosylated BODIPY- Incorporated Pt(II) Metallacycles for Targeted and Synergistic Chemo-Photodynamic Therapy

Pt(II)-BODIPY complexes combine the chemotherapeutic activity of Pt(II) with the photocytotoxicity of BODIPYs. Additional conjugation with targeting ligands can boost the uptake by cancer cells that overexpress the corresponding receptors. We describe two Pt(II) triangles, 1 and 2, built with pyridyl BODIPYs functionalized with glucose (3) or triethylene glycol methyl ether (4), respectively. Both 1 and 2 showed higher singlet oxygen quantum yields than 3 and 4, due to the enhanced singlet-to-triplet intersystem crossing. To evaluate the targeting effect of the glycosylated derivative, in vitro experiments were performed using glucose transporter 1 (GLUT1)-positive HT29 and A549 cancer cells, and noncancerous HEK293 cells as control. Both 1 and 2 showed higher cellular uptake than 3 and 4. Specifically, 1 was selective and highly cytotoxic toward HT29 and A549 cells. The synergistic chemo- and photodynamic behavior of the metallacycles was also confirmed. Notably, 1 exhibited superior efficacy toward the cisplatin-resistant R-HepG2 cells.

NI-BODIPY-GO Nanocomposites for Targeted PDT

Three multifunctional targeted NI-BODIPYs (10-12) and GO-(10-12) nanocarriers were fabricated. NI-BODIPYs are designed to facilitate non-covalent interaction with graphene oxide (GO) and target toward cancer cells for specific recognition with glucose moieties while efficiently producing singlet oxygen. We probed detailed characterization, fundamental photophysical/photochemical properties, and interactions with GO of such triplet photosensitizers and nanocarriers. The effect of the formation of nanohybrids with GO on singlet oxygen formation as well as on the efficacies of the molecules in terms of in vitro killing of cancer cells was evaluated with K562 human chronic myelogenous leukemia cells. Amazingly, it was observed that GO exhibited favorable interactions with the NI-BODIPY dyads and promoted the formation of singlet oxygen, while not showing any dark toxicity.

Novel nanoparticles prepared from isothiocyanate derivatives for phototherapy of tumor

Phototherapy is a new method to treat tumor, including photodynamic therapy (PDT) and photothermal therapy (PTT). However, the GSH in tumor cells could deplete ROS produced by photosensitizers, resulting in inadequate PDT. Isothiocyanate not only is a new type of anti-tumor drug, but also may combine with GSH, increasing the content of intracellular ROS and improving PDT effect. Here we synthesized a kind of water-soluble nanoparticles (BN NPs) parceling BODIPY-I-35 up with mPEG-ITC and lecithin. mPEG-ITC can react with GSH in tumor cells to reduce the consumption of ROS. BN NPs can be used as vectors to deliver drugs to tumor sites. Under 808 nm laser irradiation, BN NPs solution increased 13 °C within 10 min, indicating that BN NPs had superb photothermal performance. In vitro experiments, low dose BN NPs showed satisfactory PDT and PTT effects, and the cell viability of MCF-7 cell was only 13%. In vivo, BN NPs with excellent biocompatibility showed favorable phototherapy effect and tumor was effectively inhibited. Fluorescence imaging could present the long retention effect of BN NPs in tumor locations. In conclusion, the BN NPs showed the effect of enhancing phototherapy and provided a remarkable application prospect in the phototherapy of tumor cells.

Synthesis of Aza-BODIPYs, Their Differential Binding for Cu(II), and Results of Bioimaging as Fluorescent Dyes of Langerhans β-Cells

Cellular labeling through the use of dyes is of great interest to the biomedical sciences for the characterization of the location and distribution of biomolecules and also for the tracking of the course of biological processes in both health and illness. This paper reports the synthesis, characterization, and subsequent evaluation as metal sensors and cell staining probes of four aza-BODIPY compounds [herein referred to as 7(a-d)]. Compounds 7(b-d) were found to display an outstanding selectivity for Cu(II) because their emission band at 720 nm was progressively quenched by this metal, presenting fluorescence quenching between 75 and 95%. On the other hand, cell imaging studies with pancreatic β-cells proved that aza-BODIPYs 7a and 7b showed selectivity for the cytoplasm, while 7c and 7d were selective for the cell membrane. Moreover, aza-BODIPY 7b allowed to characterize in a clear way a lipotoxic condition mediated by saturated fatty acids, a critical phenomenon on β-cell damage associated with diabetes mellitus type II. Taken together, the presented results highlight the obtained aza-BODIPY compounds as selective sensing/staining probes with the potential to be used in the biomedical field.

On the Use of Polymer-Based Composites for the Creation of Optical Sensors: A Review

Polymers are widely used in many areas, but often their individual properties are not sufficient for use in certain applications. One of the solutions is the creation of polymer-based composites and nanocomposites. In such materials, in order to improve their properties, nanoscale particles (at least in one dimension) are dispersed in the polymer matrix. These properties include increased mechanical strength and durability, the ability to create a developed inner surface, adjustable thermal and electrical conductivity, and many others. The materials created can have a wide range of applications, such as biomimetic materials and technologies, smart materials, renewable energy sources, packaging, etc. This article reviews the usage of composites as a matrix for the optical sensors and biosensors. It highlights several methods that have been used to enhance performance and properties by optimizing the filler. It shows the main methods of combining indicator dyes with the material of the sensor matrix. Furthermore, the role of co-fillers or a hybrid filler in a polymer composite system is discussed, revealing the great potential and prospect of such matrixes in the field of fine properties tuning for advanced applications.

Synthesis of strong electron donating-accepting type organic fluorophore and its polypeptide nanoparticles for NIR-II phototheranostics

A novel NIR-II small-molecule D-A type organic fluorophore conjugation of triphenylamine, thiophene, and benzo[c,d] indol groups (TPA-Et) with strong electron-donating and accepting groups has been synthesized. The dye shows a significant Stokes shift for efficient fluorescence in the NIR-II region and high photothermal performance. The TPA-Et was then encapsulated by an amphiphilic copolymer P(OEGMA)₂₀-P(Asp)₁₄, and micelles (P@TP) has been prepared with outstanding NIR-II imaging performance, excellent photothermal conversion efficiency (52.5%) under 808 nm laser irradiation, and good photostability. Fluorescence imaging experiments have consistently shown that P@TP can image tiny blood vessels in mice, enrich effectively in the tumor region, and maintain a relatively stable NIR-II fluorescence signal in the tumor area for a long time up to 60 h. In vivo photothermal therapy has a highly significant anticancer effect without tumor recurrence, demonstrating the apparent advantages of P@TP as a NIR nanotheranostic platform in NIR-II imaging-guided photothermal therapy.

Engineering BODIPY-based near-infrared nanoparticles with large Stokes shifts and aggregation-induced emission characteristics for organelle specific bioimaging

Lipid droplets (LDs) and lysosomes, as two important subcellular organelles, play specific and indispensable roles in various cellular processes. The development of efficient LD- and lysosome-specific fluorescent bio-probes is of great importance. However, current commercial lipid droplet- (LD) and lysosome-specific fluorescent specific bio-probes often suffer from the aggregation-caused quenching (ACQ) effect, short absorption and emission wavelengths, poor photostability and low specificity. Herein, a typical ACQ luminogen BODIPY was directly conjugated to strong electron donating triarylamine units at its α-positions, giving near-infrared (NIR) fluorescent materials TPAB and 2TPAB with aggregation-induced emission (AIE). Both TPAB and 2TPAB nanoparticles were obtained by self-assembly, and showed NIR emissions, large Stokes shifts, good photostability and two-photon absorption. These nanoparticles presented remarkable bioimaging performances and were shown to specifically localize in LDs or lysosomes, respectively, depending on the number of triarylamine units attached. They have been successfully used to detect endogenous LD overproduction, and monitor abnormal activities of LDs/lysosomes, as well as real-time track the lipophagy process in cells. Their far NIR emission and two-photon excitation further supported their promising bioimaging application for lipid droplet tracking in liver tissue and live zebrafish larvae. Our work here enriches BODIPY based NIR AIE dyes and provides organelle specific bio-probes which are superior to currently used commercial ones.

Synthesis and bioimaging of a BODIPY-based fluorescence quenching probe for Fe3

Iron is the main substance for maintaining life. Real-time determination of ferric ion (Fe³⁺) in living cells is of great significance for understanding the relationship of Fe³⁺ concentration changes with various physiological and pathological processes. Fluorescent probes are suitable for the detection of trace metal ions in cells due to their low toxicity and high sensitivity. In this work, a boron-dipyrromethene-based fluorescent probe (BODIPY-CL) for selective detection of Fe³⁺ was synthesized. The fluorescence emission of BODIPY-CL was determined at 516 nm. In a pH range of 1 to 10, the probe BODIPY-CL exhibits a quenching response to Fe³⁺. Meanwhile, BODIPY-CL showed a highly selective response to Fe³⁺ compared with 16 kinds of metal ions. The stoichiometry ratio of BODIPY-CL bound to Fe³⁺ was nearly 2 : 1. The fluorescence quenching response obtained by the sensor was linear with the Fe³⁺ concentration in the range of 0-400 μM, and the detection limit was 2.9 μM. BODIPY-CL was successfully applied to image Fe³⁺ in cells. This study provides a promising fluorescent imaging probe for further research on the physiological and pathological effects of Fe³⁺.

Phenylthiol-BODIPY-based supramolecular metallacycles for synergistic tumor chemo-photodynamic therapy

The development of more effective tumor therapy remains challenging and has received widespread attention. In the past decade, there has been growing interest in synergistic tumor therapy based on supramolecular coordination complexes. Herein, we describe two triangular metallacycles (1 and 2) constructed by the formation of pyridyl boron dipyrromethene (BODIPY)-platinum coordination. Metallacycle 2 had considerable tumor penetration, as evidenced by the phenylthiol-BODIPY ligand imparting red fluorescent emission at ∼660 nm, enabling bioimaging, and transport visualization within the tumor. Based on the therapeutic efficacy of the platinum(II) acceptor and high singlet oxygen (¹O₂) generation ability of BODIPY, 2 was successfully incorporated into nanoparticles and applied in chemo-photodynamic tumor therapy against malignant human glioma U87 cells, showing excellent synergistic therapeutic efficacy. A half-maximal inhibitory concentration of 0.35 μM was measured for 2 against U87 cancer cells in vitro. In vivo experiments indicated that 2 displayed precise tumor targeting ability and good biocompatibility, along with strong antitumor effects. This work provides a promising approach for treating solid tumors by synergistic chemo-photodynamic therapy of supramolecular coordination complexes.

A cationic BODIPY photosensitizer decorated with quaternary ammonium for high-efficiency photodynamic inhibition of bacterial growth

On account of the constant evolution of antibiotic-resistant bacteria, the effects of existing antibacterial materials are being gradually weakened, and the difficulty in curing infectious diseases is increasing. Therefore, more novel antibacterial materials or methods are eagerly required to combat microbial infections. Recently, the advantages of photodynamic therapy in the antibacterial field have gradually been validated. Herein, a trimethylamine (TMA) salt-modified 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) photosensitizer (BODIPY-TMA) was synthesized for antibacterial applications. Due to the positive charge of the TMA group, enhanced interactions were observed between the prepared BODIPY-TMA nanoparticles (BODIPY-TMA NPs) and negatively-charged bacterial membranes. The BODIPY-TMA NPs showed much better antibacterial effect toward both S. aureus and E. coli compared with their BODIPY-Br NPs counterpart without a positive charge. Moreover, the BODIPY-TMA NPs efficiently prevented the formation of biofilms and destroyed pre-established biofilms. Thus, such positively-charged photosensitizers may pave the way for the exploration of highly effective antibacterial agents.

A Near-Infrared BODIPY-Based Rhomboidal Metallacycle for Imaging-Guided Photothermal Therapy

Although boron dipyrromethene (BODIPY)-based metallacycles are expected to be promising candidates for imaging probes and therapeutic agents, their biomedical applications are restricted by their short absorption/emission wavelengths. In this work, we report a rhombic metallacycle M with broad absorption in the near-infrared (NIR) range and emissions at wavelengths >800 nm, which exhibits an efficient photothermal conversion capacity. Metallacycle M was encapsulated via Pluronic F127 to fit the biotic environment, resulting in the generation of F127/M nanoparticles (NPs) with high hydrophilicity and biocompatibility. In vitro studies demonstrated that the F127/M NPs underwent efficient cellular uptake and exhibited satisfactory photothermal therapeutic activity. Furthermore, in vivo experiments revealed that tumor growth was effectively inhibited, and the degree of undesirable biological damage was minimal in treatment with F127/M NPs and laser irradiation. Finally, the F127/M NPs could be visualized through NIR fluorescence imaging in living mice, thereby allowing their distribution to be monitored in order to enhance treatment accuracy during photothermal therapy. We envision that such BODIPY-based metallacycles will provide emerging opportunities for the development of novel therapeutic agents for biomedical applications.

Exploring BODIPY derivatives as photosensitizers for antibacterial photodynamic therapy

There is urgently needed to develop efficient and safe antimicrobials to replace traditional antibiotics for fighting drug-resistant bacteria. Antimicrobial photodynamic therapy (aPDT), which is a promising antimicrobial strategy that can minimize antibiotic resistance and reduce systemic side effects. Boron-dipyrromethene (BODIPY) is a type of fascinating photosensitizers (PSs) for improving aPDT due to the tunable structures and photophysical features. Herein, six kinds of BODIPY derivatives (BDP1-BDP6) modified with different atoms or groups such as iodine atoms, thiophene, cyano, phenyl, aldehyde and nitro groups were synthesized and their photophysical behaviors were characterized. The results indicated that BDP3, which had 2, 6-diiodo and 8-phenyl substitution, was the best PS candidate with the highest reactive oxygen species (ROS) generation efficacy. BDP3 and BDP5 could rapidly kill Staphylococcus aureus (S. aureus) with the minimum inhibitory concentration (MIC) of 10 nM upon illumination. They also possessed excellent biofilm inhibition ability against S. aureus and could efficaciously restrain the formation of bacterial biofilm. The results of Live/Dead staining assay and scanning electron microscopy (SEM) demonstrated that BDP3 destroyed the cell membrane structure of bacteria by generating ROS, which ultimately led to bacterial lysis and death. Finally, the biosafety evaluation toward the mouse fibroblasts (L929 cells) suggested BDP3 had good cytocompatibility. This work exhibits the great potential of rational designs of PS for aPDT applications.

Halogenated BODIPY photosensitizers: Photophysical processes for generation of excited triplet state, excited singlet state and singlet oxygen

We have systematically examined the formation of singlet oxygen O₂(¹Δ_g), the excited triplet state (T₁), and excited singlet state (S₁) for halogenated BODIPY photosensitizers (halogen = Cl, Br, and I) in eight solvents to understand how halogen atoms and solvent affect these properties. The phosphorescence spectra and lifetimes of singlet oxygen generated by these halogenated BODIPYs have been measured by steady state/time resolved NIR emission, while the formation quantum yield of singlet oxygen (Φ_Δ) has been determined by chemical method using diphenylisobenzofuran (DPBF) as the trapping agent. The formation quantum yield Φ_Δ of singlet oxygen can be as high as 0.96 for iodinated BODIPY and 0.71 for brominated BODIPY. The triplet state T₁ absorption spectra of brominated and iodinated BODIPYs have been recorded by laser flash photolysis method, in which T₁ shows high formation efficiency and long lifetime. The formation and decay of excited singlet state S₁ of four BODIPYs have been measured by ground state (S₀) absorption and steady state/time resolved fluorescence. The results show that larger halogen atoms on BODIPY core lead to smaller fluorescence quantum yield, shorter fluorescence lifetime and higher singlet oxygen formation quantum yield due to heavy atom effect that promotes the formation of triplet state. On the other hand, higher solvent polarity causes lower singlet oxygen formation quantum yield, smaller fluorescence quantum yield, and shorter fluorescence lifetime. This solvent effect is explained by the presence of photoinduced charge transfer (ICT) process from halogen atoms to BODIPY. The ICT efficiency has been estimated and the results are agreed with ICT theory. ICT process in halogenated BODIPYs has never been revealed in literature. HOMO/LUMO obtained from DFT calculation also supports the presence of ICT. The involvement of ICT in the photosensitizing process of halogenated BODIPYs provides new insights for designing BODIPY photosensitizers for photodynamic therapy of tumor.

A Facile, Protein-Derived Supramolecular Theranostic Strategy for Multimodal-Imaging-Guided Photodynamic and Photothermal Immunotherapy In Vivo

Theranostic systems that permit both diagnosis and treatment in vivo are highly appealing means by which to meet the demands of precision medicine. However, most such systems remain subject to issues related to complex molecular design and synthesis, potential toxicity, and possible photoactivity changes. Herein, a novel supramolecular theranostic strategy involving biomarker protein activation (BPA) and a host-guest strategy is proposed. To exemplify BPA, a facile "one-for-all" nanotheranostic agent for both albumin detection and cancer treatment is demonstrated, which utilizes a nanoparticulate heavy-atom-free BODIPY dye derivative (B4 NPs). The fluorescence and photoactivity of BODIPY dyes are completely suppressed by aggregation-induced self-quenching in the nanoparticulate state. However, a Balb/c nude mouse model is used to confirm that following the disassembly of injected B4 NPs, BODIPY specifically binds albumin in vivo, accompanied by significantly enhanced biocompatibility and photothermal conversion efficiency. More importantly, this supramolecular host-guest BPA strategy enables the resultant nanoplatform to act as a facile and efficient strategy for photodynamic and photothermal immunotherapy.

BODIPY nanoparticles functionalized with lactose for cancer-targeted and fluorescence imaging-guided photodynamic therapy

A series of four lactose-modified BODIPY photosensitizers (PSs) with different substituents (-I, -H, -OCH₃, and -NO₂) in the para-phenyl moiety attached to the meso-position of the BODIPY core were synthesized; the photophysical properties and photodynamic anticancer activities of these sensitizers were investigated, focusing on the electronic properties of the different substituent groups. Compared to parent BODIPY H, iodine substitution (BODIPY I) enhanced the intersystem crossing (ISC) to produce singlet oxygen (¹O₂) due to the heavy atom effect, and maintained a high fluorescence quantum yield (Φ_F) of 0.45. Substitution with the electron-donating methoxy group (BODIPY OMe) results in a significant perturbation of occupied frontier molecular orbitals and consequently achieves higher ¹O₂ generation capability with a high Φ_F of 0.49, while substitution with the electron-withdrawing nitro group (BODIPY NO2) led a perturbation of unoccupied frontier molecular orbitals and induces a forbidden dark S₁ state, which is negative for both fluorescence and ¹O₂ generation efficiencies. The BODIPY PSs formed water-soluble nanoparticles (NPs) functionalized with lactose as liver cancer-targeting ligands. BODIPY I and OMe NPs showed good fluorescence imaging and PDT activity against various tumor cells (HeLa and Huh-7 cells). Collectively, the BODIPY NPs demonstrated high ¹O₂ generation capability and Φ_F may create a new opportunity to develop useful imaging-guided PDT agents for tumor cells.

Supramolecular grafting of stimuli-responsive, carrier-free, self-deliverable nanoparticles of camptothecin and antisense DNA for combination cancer therapy

A supramolecular approach for the crafting of self-deliverable nanoparticles of antisense DNA and camptothecin for combination cancer therapy is reported.

A highly selective A-π-A “turn-on” fluorescent probe for hypochlorite in tap water

A highly selective fluorescence probe (BON) for hypochlorite (ClO-) was designed and synthesized. The probe was based on boron-dipyrromethene (BODIPY) dye as the fluorophore and diaminomaleonitrile (DAMN) as the recognition...

Thermally Activated Delayed Fluorescence Material: An Emerging Class of Metal-Free Luminophores for Biomedical Applications

The development of simple, efficient, and biocompatible organic luminescent molecules is of great significance to the clinical transformation of biomaterials. In recent years, purely organic thermally activated delayed fluorescence (TADF) materials with an extremely small single-triplet energy gap (ΔEST ) have been considered as the most promising new-generation electroluminescence emitters, which is an enormous breakthrough in organic optoelectronics. By merits of the unique photophysical properties, high structure flexibility, and reduced health risks, such metal-free TADF luminophores have attracted tremendous attention in biomedical fields, including conventional fluorescence imaging, time-resolved imaging and sensing, and photodynamic therapy. However, there is currently no systematic summary of the TADF materials for biomedical applications, which is presented in this review. Besides a brief introduction of the major developments of TADF material, the typical TADF mechanisms and fundamental principles on design strategies of TADF molecules and nanomaterials are subsequently described. Importantly, a specific emphasis is placed on the discussion of TADF materials for various biomedical applications. Finally, the authors make a forecast of the remaining challenges and future developments. This review provides insightful perspectives and clear prospects towards the rapid development of TADF materials in biomedicine, which will be highly valuable to exploit new luminescent materials.

Multifunctional BODIPY for effective inactivation of Gram-positive bacteria and promotion of wound healing

Bacterial infectious diseases and antimicrobial resistance seriously endanger human health, so alternative therapies for bacterial infections are urgently needed. Recently, photodynamic therapy against bacteria has shown great potential because of its high efficiency and low acquired resistance. Here, we design and synthesize a dipyrromethene boron difluoride (BODIPY) photosensitizer containing a guanidine group LIBDP for combating bacterial infections. The positively charged guanidine can destroy the bacterial membrane and inhibit the proliferation of bacteria to a certain extent. Upon light irradiation, LIBDP can produce reactive oxygen species (ROS), which can destroy the pre-formed biofilm and induce potent antibacterial activity. In addition, the guanidine of LIBDP can be oxidized to nitric oxide (NO) by the generated ROS, which can not only improve the antibacterial effect, but also promote wound healing. The strategy in this work paves the way for synthesizing high-performance antibacterial materials.

BODIPY derivatives as fluorescent reporters of molecular activities in living cells

Fluorescent compounds have become indispensable tools for imaging molecular activities in the living cell. 4,4-Difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) is currently one of the most popular fluorescent reporters due to its unique photophysical properties. This review provides a general survey and presents a summary of recent advances in the development of new BODIPY-based cellular biomarkers and biosensors. The review starts with the consideration of the properties of BODIPY derivatives required for their application as cellular reporters. Then review provides examples of the design of sensors for different biologically important molecules, ions, membrane potential, temperature and viscosity defining the live cell status. Special attention is payed to BODPY-based phototransformable reporters.

The bibliography includes 339 references.

Cytotoxicity of Amino-BODIPY Modulated via Conjugation with 2-Phenyl-3-Hydroxy-4(1H)-Quinolinones

The combination of cytotoxic amino-BODIPY dye and 2-phenyl-3-hydroxy-4(1H)-quinolinone (3-HQ) derivatives into one molecule gave rise to selective activity against lymphoblastic or myeloid leukemia and the simultaneous disappearance of the cytotoxicity against normal cells. Both species' conjugation can be realized via a disulfide linker cleavable in the presence of glutathione characteristic for cancer cells. The cleavage liberating the free amino-BODIPY dye and 3-HQ derivative can be monitored by ratiometric fluorescence or by the OFF-ON effect of the amino-BODIPY dye. A similar cytotoxic activity is observed when the amino-BODIPY dye and 3-HQ derivative are connected through a non-cleavable maleimide linker. The work reports the synthesis of several conjugates, the study of their cleavage inside cells, and cytotoxic screening.

A Borondifluoride-Complex-Based Photothermal Agent with an 80 % Photothermal Conversion Efficiency for Photothermal Therapy in the NIR-II Window

Small organic photothermal agents (SOPTAs) that absorb in the second near-infrared (NIR-II, 1000-1700 nm) window are highly desirable in photothermal therapy for their good biocompatibility and deeper tissue penetration. However, the design of NIR-II absorbing SOPTAs remains a great challenge. Herein, we report that molecular engineering of BF₂ complex via strengthening the donor-acceptor conjugation and increasing the intramolecular motions is an efficient strategy to achieve NIR-II absorbing SOPTAs with high photothermal performance. Based on this strategy, a BF₂ complex, BAF4, was designed and synthesized. BAF4 exhibits an intense absorption maximum at 1000 nm and negligible fluorescence. Notably, the nanoparticles of BAF4 achieve a high photothermal conversion efficiency value of 80 % under 1064 nm laser irradiation (0.75 W cm^-2 ). In vitro and in vivo studies reveal the great potential of BAF4 nanoparticles in photoacoustic imaging-guided photothermal therapy in the NIR-II window.

A BODIPY-O-glycoside based near-infrared fluorescent sensor for serum albumin

Highly sensitive and selective near-infrared fluorescent bioprobes for serum albumin detection and quantification are in high demand for biomedical applications. Herein, we report a near-infrared emitting BODIPY-O-glycoside dye as a turn-on emission sensor for serum albumin. To the best of our knowledge, this is the first report of NIR-emitting BODIPY dyes for serum albumin sensing. Despite the various outstanding photophysical properties of the BODIPY dyes, their insolubility in water/biological media restricts their real biomedical applications. To overcome this issue, highly stable unadulterated BODIPY-O-glycoside nanoparticles (BDP-Glu-NPs) were prepared in aqueous solution by self-assembly of amphiphilic BODIPY-O-glycoside dyes. The BDP-Glu-NPs were characterized by spectroscopic, NMR, DLS and TEM studies. The ability of the BDP-Glu-NPs for the detection and quantification of serum albumin was demonstrated. It showed a 150-fold fluorescence enhancement in the presence of serum albumin, with excellent selectivity over other amino acids, porphyrin, proteins and various inorganic salts. Detection of human serum albumin (HSA) in urine samples showed that the bioprobe is applicable to a clinically significant range of the analytes with very low detection limit. These results suggested that the BDP-Glu-NPs can act as potential bioprobe to quantify albumin in biochemical and clinical samples.

Leveraging BODIPY nanomaterials for enhanced tumor photothermal therapy

In the past ten years, photothermal therapy (PTT) has attracted widespread attention in tumor treatment due to its non-invasiveness and little side effects. PTT utilizes heat produced by photothermal agents under the irradiation of near-infrared light to kill tumor cells. Boron-dipyrromethene (BODIPY), an organic phototherapy agent, has been widely used in tumor phototherapy due to its higher molar extinction coefficient, robust photostability and good phototherapy effect. However, there are some issues in the application of BODIPY for tumor PTT, such as low photothermal conversion efficiency and short absorption wavelength. In this review, we focus on the latest development of BODIPY nanomaterials for overcoming the above problems and enhancing the PTT effect.

Oxygen Self-Supplying Nanotherapeutic for Mitigation of Tissue Hypoxia and Enhanced Photodynamic Therapy of Bacterial Keratitis

Hypoxia, a common characteristic of bacterial infections, is known to be closely associated with the emergence of multidrug-resistant bacteria, which hastens the need to develop advanced microbicides and antibacterial techniques. Photodynamic therapy is a promising strategy to reduce bacterial antibiotic resistance and employs photosensitizers, excitation light sources, and sufficient oxygen to generate toxic reactive oxygen species (ROS). The inherent limitation of PDT is that the generation of ROS is restricted by the hypoxic microenvironment in infection sites. Here, an oxygen self-supplying nanotherapeutic is developed to enhance antibacterial activity against multidrug-resistant bacteria on the basis of fluorinated boron dipyrromethene (BODIPY)-based glycomimetics. The nanotherapeutic not only could capture the bacteria efficiently but also was able to act as an oxygen carrier to relieve the hypoxic microenvironment of bacterial infections, thus achieving enhanced PDT efficacy. In a Pseudomonas aeruginosa infection of a rat cornea, typical administration of the nanotherapeutic decreased the infiltrate and showed a faster healing capacity in comparison with BODIPY-based glycomimetics. Self-supplying oxygen nanotherapeutics that relieve the hypoxic microenvironment and interfere with bacterial colonization have been shown to be a promising candidate for the management of drug-resistant microbial keratitis.

Aromatic [b]-fused BODIPY dyes as promising near-infrared dyes

Far-red and near-infrared (NIR) absorbing/emitting dyes have found diverse applications in biomedicine and material science. However, the absorption and emission of classical BODIPY chromophores at short wavelength hamper their applications. Several strategies have been adopted to modify the structure of the BODIPY core to design NIR dyes. Among these, the most efficient approach to expand the π-conjugation of the BODIPY core is via fusion of aromatic rings. So far, many novel BODIPY skeletons fused to aromatic hydrocarbons and heterocycles at the b bond have been reported. This review comprehensively describes the recent advances regarding the development of aromatic [b]-fused BODIPY dyes with the focus on the design and synthesis, the relationships between their photophysical/spectroscopic properties and molecular structures, and the potential applications in bioassays and optoelectronic devices.

Impact of iodine loading and substitution position on intersystem crossing efficiency in a series of ten methylated-meso-phenyl-BODIPY dyes

Four core and six distyryl-extended methylated-meso-phenyl-BODIPY dyes with varying iodine content were synthesized. The influence of iodine loading and substitution position on the photophysical properties of these chromophores was evaluated. Selective iodine insertion at the 2- and 6-positions of the methylated-meso-phenyl-BODIPY core, rather than maximum iodine content, resulted in the highest intersystem crossing efficiency. Iodination of the distyryl-extended BODIPY core afforded intersystem crossing quantum yields comparable to 2,6-diiodo-BODIPY. Inclusion of an iodine at the para-meso-phenyl position generally enhanced non-radiative decay in the BODIPY excited-state, leading to lower fluorescence and intersystem crossing quantum yield values. Iodine substitution at the styryl-positions resulted in negligible changes to the excited-state dynamics. This study highlights: (1) the rate of radiative decay is similar in all ten derivatives (on the order of 1 × 108 s-1), (2) iodination of the 2,6-positions results in the greatest enhancement of intersystem crossing efficiency, (3) care must be taken when modifying the para-meso-phenyl position as it could have detrimental effects on the excited-state dynamics, (4) the excited-state is negligibly affected by iodination of the styryl groups, potentially enabling orthogonal functionalization without modifying the molecular photophysics, (5) distyryl extension of the chromophore core diminishes rates of non-radiative decay and intersystem crossing, resulting in higher fluorescence quantum yields and lower intersystem crossing yields in the π-extended derivatives compared to the core BDP derivatives, and (6) DFT calculations provide insight into the electronic and structural factors regulating intersystem crossing and vibrational relaxation in these molecules.

Recent Progress of Alkyl Radicals Generation-Based Agents for Biomedical Applications

Photodynamic therapy (PDT) is extensively explored for anticancer and antibacterial applications. It typically relies on oxygen-dependent generation of reactive oxygen species (ROS) to realize its killing effect. This type of therapy modality shows compromised therapeutic results for treating hypoxic tumors or bacteria-infected wounds. Recently, alkyl radicals attracted much attention as they can be generated from some azo-based initiators only under mild heat stimulus without oxygen participation. Many nanocarriers or hydrogel systems have been developed to load and deliver these radical initiators to lesion sites for theranostics. These systems show good anticancer or antimicrobial effect in hypoxic environment and some of them possess specific imaging abilities providing precise guidance for treatment. This review summarizes the developed materials that aim at treating hypoxic cancer and bacteria-infected wound by using this kind of oxygen-irrelevant alkyl radicals. Based on the carrier components, these agents are divided into three groups: inorganic, organic, as well as inorganic and organic hybrid carrier-based therapeutic systems. The construction of these agents and their specific advantages in biomedical field are highlighted. Finally, the existing problems and future promising development directions are discussed.

Fluorescent nanorods based on 9,10-distyrylanthracene (DSA) derivatives for efficient and long-term bioimaging

Fluorescent nanoparticles based on 9,10-distyrylanthracene (DSA) derivatives (4,4'-((1E,1'E)-anthracene-9,10-diylbis(ethene-2,1-diyl))bis(N,N-dimethylaniline) (NDSA) and 4,4'-((1E,1'E)-anthracene-9,10-diylbis(ethene-2,1-diyl))dibenzonitrile (CNDSA)) were prepared using an ultrasound aided nanoprecipitation method. The morphologies of the fluorescent nanoparticles could be controlled by adjusting the external ultrasonication time. NDSA or CNDSA could form spherical nanodots (NDSA NDs, CNDSA NDs) in a THF-H2O mixture with an 80% or 70% water fraction when the ultrasonication time was 30 s. When the ultrasonication time was prolonged to 10 min, NDSA and CNDSA could assemble into nanorods (NDSA NRs, CNDSA NRs). Meanwhile, the sizes of NDSA NRs and CNDSA NRs could be controlled by adjusting the water content in the mixture. As the water fraction was increased from 60% to 80%, the sizes of NDSA and CNDSA nanorods or nanodots reduced from 238.4 nm to 140.3 nm, and 482 nm to 198.4 nm, respectively. When the water fraction was up to 90%, irregular morphologies of NDSA and CNDSA could be observed. The nanoparticles exhibited intense fluorescence emission, good anti-photobleaching properties, as well as excellent stability and biocompatibility. In vitro cell imaging experiments indicated that the nanorods prepared by this simple method had the potential to be used for efficient and noninvasive long-term bioimaging.