Porous framework materials for singlet oxygen generation

Designing pillar-layered metal-organic frameworks with photo-induced electron transfer interactions between ligands for enhanced photodynamic sterilization and photocatalytic degradation of dyes and antibiotics

Pollution caused by antibiotics, bacteria, and organic dyes presents global public health challenges, posing serious risks to human health. Consequently, new, efficient, fast, and simple photocatalytic systems are urgently required. To this end, 2,7-di(pyridin-4-yl)benzo[lmn][3,8]phenanthroline-1,3,6,8(2H,7H)-tetraone (NDI)-an electron acceptor-is introduced as a connecting column into a porphyrin-based metal-organic layer (2DTcpp) with excellent photocatalytic activity; this modification yields a three-dimensional pillar-layered metal-organic framework (MOF, 3DNDITcpp) with superior photocatalytic reactive oxygen species (ROS) generation capability. Introducing NDI enlarges the pore cavity of 3DNDITcpp creating active sites and boosting type II ROS production. The orderly arrangement of the electron donor (porphyrin layer) and acceptor (NDI) within 3DNDITcpp promotes photo-induced electron transfer (PET) interactions-as confirmed by density functional theory calculations-substantially boosting type I ROS production. Specifically, the energy levels of the lowest unoccupied molecular orbital (LUMO) and highest occupied molecular orbital (HOMO) of the porphyrin derivative ligand are -0.122252 and -0.185307 eV, respectively. The energy levels of the LUMO and HOMO of the NDI ligand are -0.15977 and -0.221199 eV, respectively. The HOMO energy level of the porphyrin ligand is between the HOMO and LUMO of NDI, and higher than the HOMO orbital energy level of NDI, proving that the porphyrin derivative ligand can act as an electron donor and carry out an efficient PET process with the electron acceptor NDI. Various ROS indicators demonstrate the superior ROS generation ability of 3DNDITcpp under light irradiation. Using activated 2,7-dichlorodihydrofluorescein diacetate (DCFH-DA) as an indicator of total ROS, the fluorescence enhancement factors of 2DTcpp, 3DPyTcpp, and 3DNDITcpp were 42.13, 48.24 and 94.21 times, respectively. Both the degradation curve and degradation rate of 9,10-anthracenediyl-bis(methylene)dimalonic acid (ABDA) demonstrated that the order of 1O2 production ability was 3DNDITcpp (rate up to 0.312 min-1) > 3DpyTcpp (0.158 min-1) ≈ 2DTcpp (0.155 min-1). In addition, dihydrorhodamine 123 (DHR 123) and hydroxyphenyl fluorescein (HPF) were used as specific indicators of O2- and OH to monitor the generation of type I ROS of 2DTcpp, 3DPyTcpp, and 3DNDITcpp, respectively. The fluorescence enhancement factors of DHR 123 and HPF aqueous solutions containing 3DNDITcpp were as high as 47.70 and 192.19 times, respectively. The fluorescence enhancement factors of DHR 123 and HPF containing 2DTcpp and 3DPyTcpp were 19.65/63.07 (2DTcpp) and 27.97/134.19 times (3DPyTcpp), respectively. Photocurrent response (3DNDITcpp is 1.2 and 2.7 times better than 3DPyTcpp and 2DTcpp, respectively) and electrochemical impedance (3DNDITcpp is 1.9 and 2.9 times smaller than 3DPyTcpp and 2DTcpp, respectively) measurements confirming its excellent type I ROS production capability. Under low-power light irradiation (60 mW·cm-2, 5 min), ROS generated by 3DNDITcpp effectively inactivates Escherichia coli and Staphylococcus aureus, with an inhibition zone diameter of approximately 4.00 cm. Furthermore, 3DNDITcpp rapidly degrades various colored dyes and antibiotics within 30 min, achieving degradation rates as high as 0.095 and 0.054 min-1, outperforming most traditional photosensitizers (PSs). To our knowledge, this is the first instance when differences in the electron clouds of mixed ligands are leveraged to induce PET interactions within pillar-layered MOFs, yielding excellent porous PSs. Overall, our study offers a new approach for developing porous PSs with enhanced ROS generation capacity and advances MOFs crystal engineering based on mixed ligands.

Enrichment and catalysis effect of 2D/2D g-C3N4/Ti3C2 for promoting organic matter degradation and heavy metal reduction in plasma systems: Unveiling the promotion and redox mechanism

This work proposes a novel plasma-assisted 2D/2D g-C3N4/Ti3C2 system for treatment of organics-heavy metals composite wastewater. Unlike traditional materials in plasma system, 2D/2D g-C3N4/Ti3C2 not only improved the mass transfer efficiency of plasma by gathering both reactive species and pollutants onto the surface, but also induced photocatalytic reactions. Besides, the higher specific surface area and faster carrier separation rate can enhance the oxidation and reduction activity, and then promoted organic matter degradation and heavy metal reduction. Remarkably, the removal efficiency of sulfamethoxazole (SMX) and Cr(VI) increased by 16.5 % and 73.1 % respectively when introducing 2D/2D g-C3N4/Ti3C2. Roles of·OH,·H,·O2-, 1O2, e-, and h+ in SMX oxidation and Cr(VI) reduction are clarified. The primary aggregated·OH and 1O2 dominate the degradation of SMX. The influencing factors, synergistic mechanism between plasma and catalyst, and redox mechanism were clarified. This work provides a breakthrough idea for treatment of organics-heavy metals composite wastewater.

Mesoporous Vinylene-Linked Covalent Organic Frameworks with Heteroatom-Tuned Crystallinity and Photocatalytic Behaviors

Owing to its prominent π-delocalization and stability, vinylene linkage holds great merits in the construction of covalent organic frameworks (COFs) with promising semiconducting properties. However, carbon-carbon double bond formation reaction always exhibits relatively low reversibility, unfavorable for the formation of high crystalline frameworks through self-error correction and assembling processes. In this work, we report a heteroatom-tuned strategy to build up a series of two-dimensional (2D) vinylene-linked COFs by Knoevenagel condensation of an electron-deficient methylthiazolyl-based monomer with different triformyl substituted (hetero-)aromatic derivatives. The resulting COFs show high-quality periodic mesoporous structures with high surface areas. Embedding heteroatoms into the backbones enables significantly improving their crystallinity, and finely tailoring their semiconducting structures. Upon visible light stimulation, one of the as-prepared COFs with donor-π-acceptor structure could deliver a nearly seven-fold increase in the catalytic activity of hydrogen generation as compared with the other two. Meanwhile, in combination with high crystallinity and the matched conduction band energy level, such kind of COFs can be able to selectively generate singlet oxygen and superoxide radicals in a high ratio of up to 30 : 1, allowing for catalyzing aerobic thioanisole oxidation in distinctly tunable activities through the substituent electronic effect of the substrates.

Synthesis of porphyrin(2.1.2.1) Pd(II) complexes embedded with various π units and their singlet oxygen generation capacity

Novel porphyrin(2.1.2.1) Pd(II) complexes with various aromatic π rings (benzo, naphthalene and thiophene) embedded between dipyrrin units have been synthesized. Their molecular structures and optical and electronic properties were confirmed and fully investigated. These Pd(II) complexes showed moderate to good capacity of singlet oxygen generation under light irradiation.

Asymmetrically Coordinated Mn-S1N3 Configuration Induces Localized Electric Field-Driven Peroxymonosulfate Activation for Remarkably Efficient Generation of 1O2

Singlet oxygen (1O2) species generated in peroxymonosulfate (PMS)-based advanced oxidation processes offer opportunities to overcome the low efficiency and secondary pollution limitations of existing AOPs, but efficient production of 1O2 via tuning the coordination environment of metal active sites remains challenging due to insufficient understanding of their catalytic mechanisms. Herein, an asymmetrical configuration characterized by a manganese single atom coordinated is established with one S atom and three N atoms (denoted as Mn-S1N3), which offer a strong local electric field to promote the cleavage of O─H and S─O bonds, serving as the crucial driver of its high 1O2 production. Strikingly, an enhanced the local electric field caused by the dynamic inter-transformation of the Mn coordination structure (Mn-S1N3 ↔ Mn-N3) can further downshift the 1O2 production energy barrier. Mn-S1N3 demonstrates 100% selective product 1O2 by activation of PMS at unprecedented utilization efficiency, and efficiently oxidize electron-rich pollutants. This work provides an atomic-level understanding of the catalytic selectivity and is expected to guide the design of smart 1O2-AOPs catalysts for more selective and efficient decontamination applications.

Spatiotemporal Release of Singlet Oxygen in Low Molecular Weight Organo-Gels Upon Thermal or Photochemical External Stimuli

The first example of a material capable of spatiotemporal catch and release of singlet oxygen (1O2) in gel phase is presented. Several low molecular weight organogelators based around an oxotriphenylhexanoate (OTHO) core are developed and optimized with regard to; their gelation properties, and ability of releasing 1O2 upon thermal and/or photochemical external stimuli, in both gel phase and solution. Remarkably, reversible phase transitioning between the gel and solution phase are also demonstrated. Taken together two complementary modes of releasing 1O2, one thermally controlled over time, and one rapid release by means of photochemical stimuli is disclosed. These findings represent the first phase reversible system where function and aggregation properties can be controlled independently, and thus pave the way for novel applications in material sciences as well as in life sciences.

Recent Advances in Understanding of the Singlet Oxygen in Energy Storage and Conversion

Singlet oxygen (term symbol 1Δg, hereafter 1O2), a reactive oxygen species, has recently attracted increasing interest in the field of rechargeable batteries and electrocatalysis and photocatalysis. These sustainable energy conversion and storage technologies are of vital significance to replace fossil fuels and promote carbon neutrality and finally tackle the energy crisis and climate change. Herein, the recent progresses of 1O2 for energy storage and conversion is summarized, including physical and chemical properties, formation mechanisms, detection technologies, side reactions in rechargeable batteries and corresponding inhibition strategies, and applications in electrocatalysis and photocatalysis. The formation mechanisms and inhibition strategies of 1O2 in particular aprotic lithium-oxygen (Li-O2) batteries are highlighted, and the applications of 1O2 in photocatalysis and electrocatalysis is also emphasized. Moreover, the confronting challenges and promising directions of 1O2 in energy conversion and storage systems are discussed.

Mild selective photochemical oxidation of an organic sulfide using OxP-polyimide porous polymers as singlet oxygen generators

A series of porous organic polymers based on a singlet oxygen generating oxoporphyinogen ('OxP') has been successfully prepared from a pseudotetrahedral OxP-tetraamine precursor (OxP(4-NH2Bn)4) by its reaction with tetracarboxylic acid dianhydrides under suitable conditions. Of the compounds studied, those containing naphthalene (OxP-N) and perylene (OxP-P) spacers, respectively, have large surface areas (~530 m2 g-1). On the other hand, the derivative with a simple benzene spacer (OxP-B) exhibits the best 1O2 generating capability. Although the starting OxP-tetraamine precursor is a poor 1O2 generator, its incorporation into OxP POPs leads to a significant enhancement of 1O2 productivity, which is largely due to the transformation of NH2 groups to electron-withdrawing diimides. Overall 1O2 production efficacy of OxP-POPs under irradiation by visible light is significantly improved over the common reference material PCN-222. All the materials OxP-B, OxP-N and OxP-P promote oxidation of thioanisole involving conversion of ambient triplet state oxygen to singlet oxygen under visible light irradiation and its reaction with the sulfide. Although the reaction rate of the oxidation promoted by OxP POPs is generally lower than for conventional materials (such as PCN-222) or previously studied OxP derivatives, undesired overoxidation of the substrate to methyl phenyl sulfone is suppressed. For organic sulfides, selectivity of oxidation is especially important for detoxification of mustard gas (bis(2-chloroethyl)sulfide) or similarly toxic compounds since controlled oxidation leads to the low toxicity bis(2-chloroethyl)sulfoxide while overoxidation leads to intoxification (since bis(2-chloroethyl)sulfone presents greater toxicity to humans than the sulfide substrate). Therefore, OxP POPs capable of promoting selective oxidation of sulfides to sulfoxides have excellent potential to be used as mild and selective detoxification agents.

Porphyrin-Polyoxotungstate Molecular Hybrid as a Highly Efficient, Durable, Visible-Light-Responsive Photocatalyst for Aerobic Oxidation Reactions

Organic-polyoxometalate (POM) hybrids have recently attracted considerable interest because of their distinctive properties and wide-ranging applications. For the construction of organic-POM hybrids, porphyrins are promising building units owing to their optical properties and reactivity, including strong visible-light absorption and subsequent singlet-oxygen (1O2*) generation. However, the practical utilization of porphyrins as photocatalysts and photosensitizers is often hindered by their own degradation by 1O2*. Therefore, there is a substantial demand for the development of porphyrin-derived photocatalysts with both high efficiency and durability. Herein, we present a porphyrin-polyoxotungstate molecular hybrid featuring a face-to-face stacked porphyrin dimer (I) fastened by four lacunary polyoxotungstates. Hybrid I exhibited remarkable efficiency and durability in photocatalytic aerobic oxidation reactions, and the selective oxidation of various dienes, alkenes, sulfides, and amines proceeded using just 0.003 mol % of the catalyst. Mechanistic investigations suggested that the high activity of I stems from the efficient generation of 1O2*, resulting from the heavy-atom effect of POMs. Furthermore, despite its high efficiency in 1O2* generation compared to free porphyrins, I exhibited superior durability against 1O2*-induced degradation under photoirradiation.

De Novo Synthesis of Acridone-Based Zn-Metal-Organic Framework (Zn-MOF) as a Photocatalyst: Application for Visible Light-Mediated Oxidation of Sulfides and Enaminones

Acridone, a cyclic analogue of benzophenone that undergoes efficient intersystem crossing (ISC) to the triplet-excited state with near-unity quantum yield, was elaborated as a 3-connecting triacid linker, i.e., H3AcTA, to develop a photocatalytic metal-organic framework (MOF) for energy transfer applications; the triacid linker inherently features concave shapes, an attribute that is important for the construction of MOFs with significant porosity. Metal ion (Zn2+)-assisted self-assembly of the triacid yielded a Zn-MOF, i.e., Zn-AcTA, with a solvent-accessible volume of ca. 31%. The protection of the acridone chromophore in the MOF in conjunction with a wider cross-section of its absorption in the visible region renders the MOF an excellent heterogeneous photosensitizer for singlet oxygen (1O2) generation by energy transfer to the ground-state triplet oxygen (3O2). It is shown that the Zn-MOF can be applied as a photosensitizing catalyst for visible light-mediated oxidation of various sulfides to sulfoxides and enaminones to amino-esters via 1,2-acyl migration. It is further demonstrated that the photocatalyst can be easily recycled without any loss of catalytic activity and structural integrity. Based on mechanistic investigations, 1O2 is established as the reactive oxygen species in photocatalytic oxidation reactions. The results constitute the first demonstration of rational development of a photocatalytic MOF based on acridone for heterogeneous oxidations mediated by 1O2.

Singlet oxygen: Properties, generation, detection, and environmental applications

Singlet oxygen (1O2) is molecular oxygen in the excited state with high energy and electrophilic properties. It is widely found in nature, and its important role is gradually extending from chemical syntheses and medical techniques to environmental remediation. However, there exist ambiguities and controversies regarding detection methods, generation pathways, and reaction mechanisms which have hindered the understanding and applications of 1O2. For example, the inaccurate detection of 1O2 has led to an overestimation of its role in pollutant degradation. The difficulty in detecting multiple intermediate species obscures the mechanism of 1O2 production. The applications of 1O2 in environmental remediation have also not been comprehensively commented on. To fill these knowledge gaps, this paper systematically discussed the properties and generation of 1O2, reviewed the state-of-the-art detection methods for 1O2 and long-standing controversies in the catalytic systems. Future opportunities and challenges were also discussed regarding the applications of 1O2 in the degradation of pollutants dissolved in water and volatilized in the atmosphere, the disinfection of drinking water, the gas/solid sterilization, and the self-cleaning of filter membranes. This review is expected to provide a better understanding of 1O2-based advanced oxidation processes and practical applications in the environmental protection of 1O2.

Singlet oxygen in the removal of organic pollutants: An updated review on the degradation pathways based on mass spectrometry and DFT calculations

The degradation of pollutants by a non-radical pathway involving singlet oxygen (1O2) is highly relevant in advanced oxidation processes. Photosensitizers, modified photocatalysts, and activated persulfates can generate highly selective 1O2 in the medium. The selective reaction of 1O2 with organic pollutants results in the evolution of different intermediate products. While these products can be identified using mass spectrometry (MS) techniques, predicting a proper degradation mechanism in a 1O2-based process is still challenging. Earlier studies utilized MS techniques in the identification of intermediate products and the mechanism was proposed with the support of theoretical calculations. Although some reviews have been reported on the generation of 1O2 and its environmental applications, a proper review of the degradation mechanism by 1O2 is not yet available. Hence, we reviewed the possible degradation pathways of organic contaminants in 1O2-mediated oxidation with the support of density functional theory (DFT). The Fukui function (FF, f-, f+, and f0), HOMO-LUMO energies, and Gibbs free energies obtained using DFT were used to identify the active site in the molecule and the degradation mechanism, respectively. Electrophilic addition, outer sphere type single electron transfer (SET), and addition to the hetero atoms are the key mechanisms involved in the degradation of organic contaminants by 1O2. Since environmental matrices contain several contaminants, it is difficult to experiment with all contaminants to identify their intermediate products. Therefore, the DFT studies are useful for predicting the intermediate compounds during the oxidative removal of the contaminants, especially for complex composition wastewater.

A biocompatible pure organic porous nanocage for enhanced photodynamic therapy

Porphyrin-based photosensitizers have been widely utilized in photodynamic therapy (PDT), but they suffer from deteriorating fluorescence and reactive oxygen species (ROS) due to their close π-π stacking. Herein, a biocompatible pure organic porphyrin nanocage (Py-Cage) with enhanced both type I and type II ROS generation is reported for PDT. The porphyrin skeleton within the Py-Cage is spatially separated by four biphenyls to avoid the close π-π stacking within the nanocage. The Py-Cage showed a large cavity and high porosity with a Brunauer-Emmett-Teller surface area of over 300 m2 g-1, facilitating a close contact between the Py-Cage and oxygen, as well as the fast release of ROS to the surrounding microenvironment. The Py-Cage shows superb ROS generation performance over its precursors and commercial ones such as Chlorin E6 and Rose Bengal. Intriguingly, the cationic π-conjugated Py-Cage also shows promising type I ROS (superoxide and hydroxyl radicals) generation that is more promising for hypoxic tumor treatment. Both in vitro cell and in vivo animal experiments further confirm the excellent antitumor activity of the Py-Cage. As compared to conventional metal coordination approaches to improve PDT efficacy of porphyrin derivatives, the pure organic porous Py-Cage demonstrates excellent biocompatibility, which is further verified in both mice and rats. This work of an organic porous nanocage shall provide a new paradigm for the design of novel, biocompatible and effective photosensitizers for PDT.

Advances in Metal-Organic Frameworks for the Removal of Chemical Warfare Agents: Insights into Hydrolysis and Oxidation Reaction Mechanisms

The destruction of chemical warfare agents (CWAs) is a crucial area of research due to the ongoing evolution of toxic chemicals. Metal-organic frameworks (MOFs), a class of porous crystalline solids, have emerged as promising materials for this purpose. Their remarkable porosity and large surface areas enable superior adsorption, reactivity, and catalytic abilities, making them ideal for capturing and decomposing target species. Moreover, the tunable networks of MOFs allow customization of their chemical functionalities, making them practicable in personal protective equipment and adjustable to dynamic environments. This review paper focuses on experimental and computational studies investigating the removal of CWAs by MOFs, specifically emphasizing the removal of nerve agents (GB, GD, and VX) via hydrolysis and sulfur mustard (HD) via selective photooxidation. Among the different MOFs, zirconium-based MOFs exhibit extraordinary structural stability and reusability, rendering them the most promising materials for the hydrolytic and photooxidative degradation of CWAs. Accordingly, this work primarily concentrates on exploring the intrinsic catalytic reaction mechanisms in Zr-MOFs through first-principles approximations, as well as the design of efficient degradation strategies in the aqueous and solid phases through the establishment of Zr-MOF structure-property relationships. Recent progress in the tuning and functionalization of MOFs is also examined, aiming to enhance practical CWA removal under realistic battlefield conditions. By providing a comprehensive overview of experimental findings and computational insights, this review paper contributes to the advancement of MOF-based strategies for the destruction of CWAs and highlights the potential of these materials to address the challenges associated with chemical warfare.

An in-depth insight into the simultaneous oxidation of sulfamethoxazole and reduction of Cr (VI) by one system of water film DBD plasma: The interaction effect, role of active species, and their dominant to pathways

This study aims to deeply investigate the simultaneous elimination of sulfamethoxazole (SMZ) and Cr (VI) through one system of water film dielectric barrier discharge (WFDBD) plasma. The interaction effect of SMZ degradation and Cr (VI) reduction and dominant effect of active species were highlighted. Results showed that the oxidation of SMZ and the reduction of Cr (VI) directly promote each other. When the concentration of Cr (VI) raised from 0 to 2 mg L^-1, the degradation rate of SMZ enhanced from 75.6% to 88.6%, respectively. Similarly, when the concentration of SMZ improved from 0 to 15 mg L^-1, the removal efficiency of Cr (VI) improved from 70.8% to 84.3%, respectively. ·OH, ¹O₂ and ·O₂^- play crical roles for SMZ degradation, and e^-, ·O₂^-, ·H and H₂O₂ dominated to the Cr (VI) reduction. The variations of pH, conductivity and TOC during the removal process were also explored. The removal process was studied by UV-vis spectroscopy and a three-dimensional excitation-emission matrix. Based on DFT calculation and LC-MS analysis, free radicals dominated SMZ degradation pathways in the WFDBD plasma system were clarified. Besides, the influence of Cr (VI) on SMZ degradation pathway was clarified. The ecotoxicity of SMZ and the toxicity of Cr (VI) into Cr (III) were greatly reduced. This study provides a significant reference value for the application and mechanism of plasma simultaneous removal of organic pollutants and heavy metals in wastewater.

Hierarchical porous photosensitizers with efficient photooxidation

Photosensitizers (PSs) with nano- or micro-sized pore provide a great promise in the conversion of light energy into chemical fuel due to the excellent promotion for transporting singlet oxygen (¹O₂) into active sites. Despite such hollow PSs can be achieved by introducing molecular-level PSs into porous skeleton, however, the catalytic efficiency is far away from imagination because of the problems with pore deformation and blocking. Here, very ordered porous PSs with excellent ¹O₂ generation are presented from cross-linking of hierarchical porous laminates originated by co-assembly of hydrogen donative PSs and functionalized acceptor. The catalytic performance strongly depends on the preformed porous architectures, which is regulated by special recognition of hydrogen binding. As the increasing of hydrogen acceptor quantities, 2D-organized PSs laminates gradually transform into uniformly perforated porous layers with highly dispersed molecular PSs. The premature termination by porous assembly endows superior activity as well as specific selectivity for the photo-oxidative degradation, which contributes to efficient purification in aryl-bromination without any postprocessing.

Light-related activities of metal-based nanoparticles and their implications on dermatological treatment

Metal-based nanoparticles (MNPs) represent an emerging class of materials that have attracted enormous attention in many fields. By comparison with other biomaterials, MNPs own unique optical properties which make them a potential alternative to conventional therapeutic agents in medical applications. Especially, owing to the easy access to the skin, the use of MNPs based on their optical properties has gained importance for the treatment of a variety of skin diseases. This review provides an insight into the different optical properties of MNPs, including photoprotection, photocatalysis, and photothermal, and highlights their implications in treating skin disorders, with a special emphasis on their use in infection control. Finally, a perspective on the safety concern of MNPs for dermatological use is discussed and analyzed. The information gathered and presented in this review will help the readers have a comprehensive understanding of utilizing the photo-triggered activity of MNPs for the treatment of skin diseases.

An oxygen-generating metal organic framework nanoplatform as a “synergy motor” for extricating dilemma over photodynamic therapy

Photodynamic therapy (PDT) combined with metal organic frameworks (MOFs) addresses current obstacles.

Photodynamic and Its Concomitant Ion-Interference Synergistic Therapies Based on Functional Hierarchically Mesoporous MOFs

Although ion-interference therapy (IIT) has become an intriguing option for cancer treatment, the generation of interference ions on-demand remains a challenge. Herein, a nanoplatform based on hierarchically mesoporous metal-organic frameworks (HMMOFs) is adopted to integrate black phosphorus quantum dots (BPQDs) and meso-tetra(4-carboxyphenyl) porphine (TCPP) to realize controllable phosphate anions (PAs) production in a specific cancerous region for IIT. The uniform large mesopores of HMMOFs could guarantee the selective screening and immobilization of ultra-small and monodispersed BPQDs. The TCPP in microporous domains of HMMOFs could effectively produce ¹ O₂ , which not only serves as photosensitizer for photodynamic therapy (PDT), but also switches on the release of PAs from BPQDs in the adjacent mesoporous domains to trigger the concomitant synergetic IIT. The elaborated nanoplatform (BP@HMUiO-66-TCPP) presents good biocompatibility, biodegradability as well as enhanced synergetic therapeutic effects. In murine models treated with BP@HMUiO-66-TCPP, the tumor inhibition rate is as high as ≈98.24% as compared to that of the control group after 14 days treatment. Moreover, the tumor volumes in the synergetic group are only 19.6% of those in the PDT alone treated group. Such a concept of exogenous photo-controlled synergistic therapeutics might be extended to a broad range of IIT for an improved antitumor efficacy.

Rational Regulation of Co-N-C Coordination for High-Efficiency Generation of 1O2 toward Nearly 100% Selective Degradation of Organic Pollutants

Single oxygen-based advanced oxidation processes (¹O₂-AOPs) exhibit great prospects in selective degradation of organic pollutants. However, efficient production of ¹O₂ via tailored design of catalysts to achieve selective oxidation of contaminants remains challenging. Herein, we develop a simple strategy to regulate the components and coordination of Co-N-C catalysts at the atomic level by adjusting the Zn/Co ratio of bimetallic zeolitic imidazolate frameworks (Zn_xCo₁-ZIFs). Zn₄Co₁-C demonstrates 98% selective removal of phenol in the mixed phenol/benzoic acid (phenol/BA) solutions. Density functional theory calculations and experiments reveal that more active CoN₄ sites are generated in Zn₄Co₁-C, which are beneficial to peroxymonosulfate activation to generate ¹O₂. Furthermore, the correlation between the origin of selectivity and well-defined catalysts is systematically investigated by the electron paramagnetic resonance test and quenching experiments. This work may provide novel insights into selective removal of target pollutants in a complicated water matrix.

Boosting the singlet oxygen production from H2O2 activation with highly dispersed Co-N-graphene for pollutant removal

Singlet oxygen (1O2) is a promising reactive species for the selective degradation of organic pollutants. However, it is difficult to generate 1O2 from H2O2 activation with high efficiency and selectivity. In this work, a graphene-supported highly dispersed cobalt catalyst with abundant Co-N x active sites (Co-N-graphene) was synthesized for activating H2O2. The Co-N-graphene catalyzed H2O2 reaction system selectively catalyzed 1O2 production associated with the superoxide radical (O2˙-) as the critical intermediate, as proven by scavenger experiments, electron spin resonance (ESR) spin trapping and a kinetic solvent isotope effect study. This resulted in excellent degradation efficiency towards the model organic pollutant methylene blue (MB), with an outstanding pseudo-first-order kinetic rate constant of 0.432 min-1 (g Lcatalyst -1)-1 under optimal reaction conditions (C H2O2 = 400 mM, initial pH = 9). Furthermore, this Co-N-graphene catalyst enabled strong synergy with HCO3 - in accelerating MB degradation, whereas the scavenger experiment implied that the synergy herein differed significantly from the current Co2+-HCO3 - reaction system, in which contribution of O2˙- was only validated with a Co-N-graphene catalyst. Therefore, this work developed a novel catalyst for boosting 1O2 production from H2O2 activation and will extend the inventory of catalysts for advanced oxidation processes.

Photosensitizer Encryption with Aggregation Enhanced Singlet Oxygen Production

Chromophores that generate singlet oxygen (¹O₂) in water are essential to developing noninvasive disease treatments using photodynamic therapy (PDT). A facile approach for formation of stable colloidal nanoparticles of ¹O₂ photosensitizers, which exhibit aggregation enhanced ¹O₂ generation in water toward applications as PDT agents, is reported. Chromophore encryption within a fuchsonarene macrocyclic scaffold insulates the photosensitizer from aggregation induced deactivation pathways, enabling a higher chromophore density than typical ¹O₂ generating nanoparticles. Aggregation enhanced ¹O₂ generation in water is observed, and variation in molecular structure allows for regulation of the physical properties of the nanoparticles which ultimately affects the ¹O₂ generation. In vitro activity and the ability of the particles to pass through the cell membrane into the cytoplasm is demonstrated using confocal fluorescence microscopy with HeLa cells. Photosensitizer encryption in rigid macrocycles, such as fuchsonarenes, offers new prospects for the production of biocompatible nanoarchitectures for applications involving ¹O₂ generation.

A Perylenediimide-Based Zinc-Coordination Polymer for Photosensitized Singlet-Oxygen Generation

In the face of anthropogenic global warming the design and synthesis of materials, which enable energy transfer processes using sunlight as an energy source, are of high interest. Perylenediimides are a highly absorbing class of chromophores suitable for sunlight absorption and conversion. Therefore, metal–organic frameworks (MOFs) and coordination polymers (CPs) with incorporated organic perylene chromophores are highly interesting materials both for applied, but also fundamental, photophysical research. MOFs/CPs have the advantage of a modular adjustability of interchromophoric distances and angles, and the choice of metal nodes can be used to further tune the material towards the desired photophysical properties. In the present paper, we present a study using a reported organic perylenediimide (PDI) chromophore (H2tpdb) as a linker to be incorporated into coordination polymer and test towards applicability within the photochemical 1O2 generation. In detail, a novel zinc 2D -coordination polymer Zn(tpdb)(DMF)3 is reported, which is synthesized using a solvothermal synthesis with Zn(NO3)2 and a ditopic organic perylene linker. Both the linker and Zn-CP are fully characterized, including SC-XRD, showing a strong aggregation of tightly packed chromophores in the solid state. The photophysical properties are examined and discussed, including the observed shifts within the absorption spectra of the CP are compared to the linker in solution. These shifts are mainly attributed to the for PDIs known H-type aggregation and an additional charge transfer in the framework structure, causing a limited quantum yield of the emission. Finally, the photosensitization of triplet oxygen to singlet oxygen using 1,3-diphenylisobenzofurane (DBPF) as a trapping agent is investigated both for the free linker and the Zn-CP, showing that the perylene chromophore is an efficient photosensitizer and its activity can, in principle, be retained after its incorporation in the coordination polymer.

Nonionic omnisoluble photosensitizer reference material for the estimation of singlet oxygen quantum yield

Meso-Tetrakis-(3,4,5-tris{2-[2-(2-methoxyethoxy)ethoxy]ethoxy}phenyl)porphyrin TEG12PH2 is reported as an 'omnisoluble' reference for singlet oxygen (¹O₂) generation quantum yield (Φ_SO) estimation. TEG12PH2 is a highly soluble, nonionic compound possessing excellent ¹O₂ QY in a wide variety of common solvents, including water. TEG12PH2 was prepared on multigram scale by the 12-way O-alkylation of tetrakis(3,4,5-trihydroxyphenyl)porphyrin using 2-(2-(2-methoxyethoxy)ethoxy)ethyl 4-toluenesulfonate as a reaction solvent. The corresponding Zn(II) complex TEG12PZn was also prepared and studied. The ¹O₂ QYs of TEG12PH2 in the different solvents studied were found to be 0.86 (acetone), 0.59 (acetonitrile), 0.66 (chloroform), 0.85 (methanol), 0.45 (toluene) and 0.51 (water). TEG12PH2 can be considered a reliable and easy to implement omnisoluble reference compound for the estimation of the ¹O₂ generating activities of new materials, especially new porphyrinic compounds.

Removal of aqueous pharmaceuticals by magnetically functionalized Zr-MOFs: Adsorption Kinetics, Isotherms, and regeneration

The functionalization of metal-organic frameworks (MOFs) is imperative and challenging for the development of practical MOF-based materials. Herein, a magnetically functionalized Zr-MOF (Fe₃O₄@MOF-525) was synthesized via secondary-growth approach to obtain an easily-separated and recyclable adsorbent for the removal of pharmaceuticals (tetracycline (TC) and diclofenac sodium (DF)). After loading Fe₃O₄ nanoparticles (NPs), due to the increase of micropore volume and specific surface area caused by defects, the adsorption performance of Fe₃O₄@MOF-525 was improved. The kinetics could be described by the pseudo-second-order kinetic model. The different adsorption capacity and initial rate were attributed to the properties of the pharmaceuticals, including the molecular size and hydrophobicity/hydrophilicity. In isotherm experiments, the maximum adsorption capacities of DF and TC on Fe₃O₄@MOF-525 calculated by Sips model reached 745 and 277 mg·g^-1, respectively. The thermodynamic studies indicated the adsorption was endothermic and spontaneous. The effect of pH suggested that electrostatic interaction, π-π interaction, anion-π interaction, and H-bonding were possibly involved in the adsorption process. The adsorbent was separated by magnetic and regenerated. Washed with ethanol, Fe₃O₄@MOF-525 remained about 80% adsorption capacity after four cycles. In-situ photo-regeneration under visible-light irradiation was another attractive method, where > 95% TC was degraded in 4 h. The reaction with scavengers revealed that ¹O₂ was the dominant reactive species in our system, indicating the occurrence of Type II photosensitization. The separability, excellent adsorption performance, and recyclability of Fe₃O₄@MOF-525 may lead to its beneficial applications in water treatment.

Porphyrin-Based Two-Dimensional Layered Metal-Organic Framework with Sono-/Photocatalytic Activity for Water Decontamination

Water treatment is crucial to improve the water quality and reduce diarrheal and chronological diseases caused by excessive discharge of organic dyes and other waste. The development and expansion of efficient catalysts for the degradation and sterilization of organic dyes has attracted widespread attention. Herein, we report an example of a porphyrin-based two-dimensional layered metal-organic framework (MOF) (2DZnTcpp) and its efficient sono-/photocatalytic degradation of organic dyes and bactericidal activity. The dislocated layers effectively avoid close π-π stacking and provide a porous space for oxygen/water/dye contact. The introduction of Zn ions increases the spin orbital coupling through the heavy atom effect and promotes the intersystem crossing process for singlet oxygen generation. The effective ligand-to-metal charge transfer and the excessive open Zn catalytic sites also facilitate water splitting for hydroxyl radical generation. These features together promote the reactive oxygen species (ROS) generation of 2DZnTcpp under light illumination or ultrasound sonication. It is worth noting that the 2DZnTcpp with a high specific surface area and porosity shows efficient sono-/photocatalytic degradation of organic dye waste. Moreover, 2DZnTcpp could also largely inactivate Escherichia coli under light irradiation (the light power of 1 sun) or ultrasound sonication for 30 min with efficiencies over 99.99999%. This work provides an approach for the design and synthesis of MOF-based sono-/photocatalysts used in the purification and treatment of textile wastewater and is committed to the establishment of a more efficient, fast, and environmentally friendly catalytic system.

An Isopolymolybdate-Incorporated Metal-Organic Framework with Sulfite Oxidase-Mimicking Activity for Photocatalytic Oxidation of Sulfides Utilizing In Situ-Generated Singlet Oxygen

Developing new photocatalysts for sulfide oxidation utilizing in situ-generated 1O2 is very significant. Inspired by natural enzymatic processes, we synthesized a mimic sulfite oxidase (SO), {[Co(Mo4O13)(TPT)2]} (CoMo-TPT), by incorporating an isopolymolybdate anion [Mo4O13]2- into a 2,4,6-tri(4-pyridyl)-1,3,5-triazine (TPT)-based metal-organic framework under mild hydrothermal conditions. In this structure, {Mo4O13} units with intrinsic SO-like catalytic sites are beneficial for the selective oxidation of sulfite and thioether. The ultraviolet-visible spectra of CoMo-TPT exhibited strong absorption from 250 to 650 nm and potential application in the utilization of solar energy. Mott-Schottky measurements indicated that CoMo-TPT is an n-type semiconductor with a LUMO value of -0.70 V (vs NHE) and a HOMO value of 1.39 V. The transient photocurrent responses with strong current density cycles with visible light indicated CoMo-TPT has a high photochemical activity. The lower resistance indicated that CoMo-TPT has a higher efficiency of photoinduced electron and hole separation. CoMo-TPT displayed a high efficiency of 99% and a selectivity of 97.3% in photocatalytic oxidation of sulfides by utilizing in situ-generated 1O2 through a tandem process of formation of H2O2 from O2 followed by catalyzed disproportionation of H2O2.

Superoxide Ion and Singlet Oxygen Photogenerated by Metalloporphyrin-Based Metal-Organic Frameworks for Highly Efficient and Selective Photooxidation of a Sulfur Mustard Simulant

The exploration of highly efficient materials for the degradation of chemical warfare agents has been a longstanding task for preventing human exposure. Herein, we report a series of metal-organic frameworks (MOFs) M-TCPP-La based on metallo-tetra(4-carboxyphenyl)porphyrin and La^III, which were applied to selectively oxidize 2-chloroethyl ethyl sulfide (CEES, a sulfur mustard simulant) as heterogeneous photocatalysts. After irradiation from a commercial blue light-emitting diode (LED), both superoxide ion and singlet oxygen were generated by M-TCPP-La and involved in selective oxidization of CEES to 2-chloroethyl ethyl sulfoxide (CEESO). Notably, a very short half lifetime (2.5 min) was achieved using Fe-TCPP-La as the photocatalyst. In comparison to currently utilizing singlet oxygen and hydrogen peroxide as oxidizing agents, this work employing both singlet oxygen and superoxide ion represents a new and effective strategy of detoxification of mustard gas.

Singlet Oxygen Generation from a Water-Soluble Hypervalent Iodine(V) Reagent AIBX and H2O2: An Access to Artemisinin

Herein, we report an efficient method for the chemical generation of ¹O₂ by treatment of H₂O₂ with AIBX, a highly water-soluble, bench-stable, recyclable hypervalent iodine(V) reagent developed by our group. The generation of ¹O₂ was confirmed by the following results: (1) capture of ¹O₂ with the sodium salt of anthracene-9,10-bis(ethanesulfonate) produced the corresponding endoperoxide and (2) TEMPO (2,2,6,6-tetramethyl-1-piperidinyloxy) produced by the oxidation of 2,2,6,6-tetramethylpiperidine with ¹O₂ generated using the AIBX/H₂O₂ system was detected by electron spin resonance spectroscopy. To illustrate the potential utility of this method for organic synthesis, we used the AIBX/H₂O₂ system to perform typical reactions of ¹O₂: [2 + 2]/[4 + 2] cycloadditions, Schenck ene reactions, and heteroatom oxidation reactions, which afforded the corresponding products in high yields. Moreover, we used the method to synthesize the antimalarial drug artemisinin. Finally, we demonstrated that AIBX could be regenerated after the reaction by means of a workup involving extraction and removal of water to obtain a precursor of AIBX, which could then be re-oxidized.

β-Cyclodextrin-conjugated phthalocyanines as water-soluble and recyclable sensitisers for photocatalytic applications

Two zinc(ii) phthalocyanines substituted with two and four permethylated β-cyclodextrin moieties at the α positions have been synthesised and immobilised on the surface of adamantane-modified silica nanoparticles through host-guest interactions. These molecular and supramolecular systems can catalyse the photooxygenation of 1-naphthol and 2-furoic acid in organic and aqueous media with high conversion efficiency and reaction yield, and photodegradation of 2-chlorophenol in water. Having a higher photostability and recyclability, the supramolecular nanosystems are particularly promising for these photocatalytic applications.

Enabling photocatalytic activity of [Ru(2,2′:6′,2′′-terpyridine)2]2+ integrated into a metal–organic framework

A multicomponent metal–organic framework is constructed to incorporate the bis-terpyridyl ruthenium motif, which was considered poorly photoactive, through a stepwise reticular synthesis to arouse its photosensitiveness for producing singlet oxygen.

Ionic liquid induced highly dense assembly of porphyrin in MOF nanosheets for photodynamic therapy

A facile fabrication of porphyrin-integrated MOF nanosheets as efficient photosensitizers for photodynamic therapy (PDT) is presented.