Simultaneous detection and removal of fluoride from water using smart metal-organic framework-based adsorbents

Harnessing the potential of zeolites for effective fluoride removal from wastewater: a review

Fluoride contamination in water poses significant health risks, including dental fluorosis, kidney failure, and reduced cognitive function in children. This comprehensive review examines the potential of zeolites for effective fluoride removal from wastewater. Zeolites, crystalline aluminosilicates with unique structural properties, have garnered attention due to their high adsorption capacity, low cost, and environmental compatibility. We discuss various zeolite types (natural, synthetic, and modified) and explore surface modification techniques, including chemical, composite, physical, and biological methods, to enhance fluoride adsorption capacity. Key factors influencing fluoride adsorption, such as pH, temperature, initial concentration, adsorbent dosage, and competing ions, are analyzed. The review elucidates adsorption mechanisms, including electrostatic interactions, ion exchange, Lewis acid-base interactions, and ligand exchange. Adsorption kinetics and isotherms are examined to understand process dynamics and equilibrium behavior. We compare conventional and novel zeolite synthesis methods, highlighting solvent-free approaches for sustainable production. Regeneration potential is assessed, considering environmental impact, cost, and efficiency. While zeolite-based adsorbents show promising results in laboratory settings, we emphasize the need for pilot-scale and full-scale implementations, particularly in treating real industrial wastewater. Future research directions are proposed to develop efficient, cost-effective, and environmentally friendly zeolite-based technologies for fluoride removal.

A novel fluorescent probe for rapid and selective detection of fluoride ions in living cells

A novel fluorescent probe DTP, based on fluorine-silicon complexation, extends emission to 590 nm and achieves a 5 minutes response time. It shows high selectivity and a 0.98 μM detection limit for fluoride ions, with successful bioimaging application in living cells.

Revolutionizing environmental cleanup: the evolution of MOFs as catalysts for pollution remediation

The global problem of ecological safety and public health necessitates, the development of new sustainable ideas for pollution remediation. In recent development, metal-organic frameworks (MOF) are the emerging technology with remarkable potential, which have been employed in environmental remediation. MOFs are networks that are created by the coordination of metals or polyanions with ligands and contain organic components that can be customized. The interesting features of MOFs are a large surface area, tuneable porosity, functional diversity, and high predictability of pollutant adsorption, catalysis, and degradation. It is a solid material that occupies a unique position in the war against environmental pollutants. One of the main benefits of MOFs is that they exhibit selective adsorption of a wide range of pollutants, including heavy metals, organics, greenhouse gases, water and soil. Only particles with the right combination of pore size and chemical composition will achieve this selectivity, derived from the high level of specificity. Besides, they possess high catalytic ability for the removal of pollutants by means of different methods such as photocatalysis, Fenton-like reactions, and oxidative degradation. By generating mobile active sites within the framework of MOFs, we can not only ensure high affinity for pollutants but also effective transformation of toxic chemicals into less harmful or even inert end products. However, the long-term stability of MOFs is becoming more important as eco-friendly parts are replaced with those that can be used repeatedly, and systems based on MOFs that can remove pollutants in more than one way are fabricated. MOFs can reduce waste production, energy consumption as compared to the other removal process. With its endless capacities, MOF technology brings a solution to the environmental cleansing problem, working as a flexible problem solver from one field to another. The investigation of MOF synthesis and principles will allow researchers to fully understand the potential of MOFs in environmental problem solving, making the world a better place for all of us.

Highly efficient removal and real-time visual detection of fluoride ions using ratiometric CAU-10-NH2@RhB: Probe design, sensing performance, and practical applications

The extensive use of fluoride in agriculture, industry, medicine, and daily necessities has raised growing concerns about fluoride residue. To date, real-time visual detection and efficient removal of fluoride ions from water remain greatly desirable. Herein, nano-CAU-10-NH2@RhB is introduced as a ratiometric fluorescent probe and efficient scavenger for the intelligent detection and removal of fluoride ions. CAU-10-NH2@RhB is readily obtained through one-pot synthesis and exhibits high sensitivity and selectivity for real-time fluoride ion detection, with a naked-eye distinguishable color change from pink to blue. A portable device for point-of-care testing was developed based on color hue analysis readout using a smartphone. A quantitative response was achieved across a wide concentration range, with a detection limit of 54.2 nM. Adsorption experiments suggest that nano-CAU-10-NH2@RhB serves as an efficient fluoride ion scavenger, with a fluoride adsorption capacity of 49.3 mg/g. Moreover, the mechanistic study revealed that hydrogen bonds formed between fluoride ions and amino groups of CAU-10-NH2@RhB are crucial for the detection and adsorption of fluoride ions. This analysis platform was also used for point-of-care quantitative visual detection of fluoride ions in food, water, and toothpaste.

High-selectivity turn-on fluorescence-based fluoride ion detection using histidine-functionalized UiO-66-NH2

Hisditine-functionalized UiO-66-NH2 (UiO-66-NH2@Hst) as a novel "turn-on" fluorescent probe to detect fluoride ions has been successfully synthesized using the solvothermal method. The results showed that fluoride ion detection gave the best fluorescence response in water media and no response was observed in non-polar solvents. Detection at pH 3-10 produces a relatively similar fluorescence response and decreases quite significantly at pH 11-13. UiO-66-NH2@Hst is very selective and stable towards fluoride ions as evidenced by the appearance of blue luminescence under UV light (λ 365 nm) compared to other ions. A possible mechanism for detecting fluoride ions is through the formation of hydrogen bonds, which results in incremental electron transfer from organic ligands to Zr-oxo clusters. The LoD value obtained in this study was 0.013 ppm, which is smaller than the maximum concentration of fluoride ions in drinking water samples (1.5 ppm) set by the World Health Organization (WHO). Therefore, UiO-66-NH2@Hst can be a candidate fluorescence-based sensor for fluoride ions.

Bioremediation of organic pollutants by laccase-metal-organic framework composites: A review of current knowledge and future perspective

Immobilized laccases are widely used as green biocatalysts for bioremediation of phenolic pollutants and wastewater treatment. Metal-organic frameworks (MOFs) show potential application for immobilization of laccase. Their unique adsorption properties provide a synergic effect of adsorption and biodegradation. This review focuses on bioremediation of wastewater pollutants using laccase-MOF composites, and summarizes the current knowledge and future perspective of their biodegradation and the enhancement strategies of enzyme immobilization. Mechanistic strategies of preparation of laccase-MOF composites were mainly investigated via physical adsorption, chemical binding, and de novo/co-precipitation approaches. The influence of architecture of MOFs on the efficiency of immobilization and bioremediation were discussed. Moreover, as sustainable technology, the integration of laccases and MOFs into wastewater treatment processes represents a promising approach to address the challenges posed by industrial pollution. The MOF-laccase composites can be promising and reliable alternative to conventional techniques for the treatment of wastewaters containing pharmaceuticals, dyes, and phenolic compounds. The detailed exploration of various immobilization techniques and the influence of MOF architecture on performance provides valuable insights for optimizing these composites, paving the way for future advancements in environmental biotechnology. The findings of this research have the potential to influence industrial wastewater treatment and promoting cleaner treatment processes and contributing to sustainability efforts.

A New Phenothiazine-Based Fluorescent Probe for Rapid and Specific Detection of Fluoride

Fluorescent probes with specific and rapid response to fluoride ions are important mediators for detecting fluoride ions in biological systems. In this study, a phenothiazine-based fluorescent probe, PTC, was designed and synthesized, which undergoes cleavage activation and cyclization induced by fluoride ions targeting Si-O bonds. The probe exhibits strong anti-interference properties and reaches peak fluorescence within 5 min, allowing for quantitative detection of fluoride ions content in the concentration range of 0 to 12.5μM, suitable for live cell fluorescence imaging. The research findings suggest its potential application value in biological systems.

Advances and future perspectives of water defluoridation by adsorption technology: A review

Fluoride contamination in water sources poses a significant challenge to human health and the environment. In recent years, adsorption technology has emerged as a promising approach for water defluoridation due to its efficiency and cost-effectiveness. This review article comprehensively explores the advances in water defluoridation through adsorption processes. Various adsorbents, including natural and synthetic materials, have been investigated for their efficacy in removing fluoride ions from water. The mechanisms underlying adsorption interactions are elucidated, shedding light on the factors influencing defluoridation efficiency. Moreover, the review outlines the current state of technology, highlighting successful case studies and field applications. Future perspectives in the field of water defluoridation by adsorption are discussed, emphasizing the need for sustainable and scalable solutions. The integration of novel materials, process optimization, and the development of hybrid technologies are proposed as pathways to address existing challenges and enhance the overall efficacy of water defluoridation. This comprehensive assessment of the advances and future directions in adsorption-based water defluoridation provides valuable insights for researchers, policymakers, and practitioners working towards ensuring safe and accessible drinking water for all.

Enhanced fluoride removal using montmorillonite clay modified with CoFe2O4 and metal-organic frameworks

The use of modified clays can play an effective role as an effective adsorbent in removing fluoride (Flu) ions from water and aqueous solutions. In the present research, montmorillonite clay (MMt) was modified using CoFe2O4 magnetic particles and Al-Fe fumarate metal-organic framework (Al-Fe Fum) and was utilized as an efficient adsorbent for removing Flu from aqueous solution. The properties of MMt and MMt/CoFe2O4/Al-Fe Fum samples were investigated using different techniques. The results showed that with the modification of MMt using CoFe2O4 magnetic particles and the metal-organic framework of Al-Fe Fum, the BET surface has increased notably from 13.217 to 365.80 m2/g. To investigate the effect of independent variables and their interaction on the efficiency of the Flu adsorption, response surface method-central compound design (RSM-CCD) was served. Based on the results of ANOVA, the F-value and p-value parameters for the desired model were determined to be 783.09 and < 0.0001, respectively, which confirms the success and high ability of the model. The number of R2, adjusted R2, and Predicted R2 for adsorption of Flu ion was determined to be 0.998, 0.997, and 0.995, respectively, which shows that the proposed regression model can describe the process of adsorption and interaction between variables well. Compared to other kinetic models, the pseudo 2nd order kinetic model has a greater ability to describe the Flu adsorption behavior. The R2 parameter value determined that the Freundlich isotherm model has a suitable ability to investigate the isotherm behavior and confirms the effect of heterogeneous surfaces in the process. Generally, the outcomes signified that the MMt and MMt/CoFe2O4/Al-Fe Fum samples can be reused several times in the process of Flu adsorption, while the efficiency is more than 90%.

Cu-MOF loaded chitosan based freeze-dried highly porous dressings with anti-biofilm and pro-angiogenic activities accelerated Pseudomonas aeruginosa infected wounds healing in rats

Metal-organic frameworks (MOFs)-based therapy opens a new area for antibiotic-drug free infections treatment. In the present study, chitosan membranes (CS) loaded with two concentrations of copper-MOF 10 mg/20 ml (Cu-MOF10/CS) & 20 mg/20 ml (Cu-MOF20/CS) were prepared by a simple lyophilization procedure. FTIR spectra of Cu-MOF10/CS and Cu-MOF20/CS dressings confirmed absence of any undesirable chemical changes after loading Cu-MOF. The SEM images of the synthesized materials (CS, Cu-MOF10/CS & Cu-MOF20/CS) showed interconnected porous structures. Cytocompatibility of the materials was confirmed by fibroblasts cells culturing and the materials were hemocompatible, with blood clotting index <5 %. Cu-MOF20/CS showed comparatively higher effective antibacterial activity against the tested strains; E. coli (149.2 %), P. aeruginosa (165 %) S. aureus (117.8 %) and MRSA (142 %) as compared to Amikacin, CS and Cu-MOF10/CS membranes. Similarly, Cu-MOF20/CS dressing significantly eradicated the biofilms; P. aeruginosa (37 %) and MRSA (52 %) respectively. In full thickness infected wound rat model, on day 23, Cu-MOF10/CS and Cu-MOF20/CS promoted wound healing up to 87.7 % and 82 % respectively. H&E staining of wounded tissues treated with Cu-MOF10/CS & Cu-MOF20/CS demonstrated enhanced neovascularization and re-epithelization along-with reduced inflammation, while trichrome staining exhibited increased collagen deposition. Overall, this study declares Cu-MOFs loaded chitosan dressings a multifunctional platform for the healing of infected wounds.

Portable hydroxyl-functionalized coal gangue-based cordierite porous ceramics sheets for effective adsorption of fluorine-containing wastewater

Monolithic adsorbent removal of fluoride from water is considered an effective and non-secondary pollution method. Here, a portable hydroxyl-functionalized coal gangue-based cordierite porous ceramic sheet (ACGC-Fe) is prepared by using coal gangue solid waste with a specific silicon-aluminum-rich composition ratio and a small amount of magnesium oxide as a raw material through powder compression molding and mild chemical modification. The prepared ACGC-Fe can be used to treat fluorine-containing wastewater and the maximum adsorption of fluorine can reach 18.69 mg g-1. The Langmuir (Freundlich) adsorption isotherm model and pseudo-second-order kinetic model here provided a satisfactory description of the fluoride removal operating mechanism, and it is confirmed that the adsorption mechanism of ACGC-Fe is mainly attributed to the chemisorption of hydrogen bonds (with hydroxyl group) and ionic bonds (with metal), and physical adsorption based on cordierite porous ceramic pores. This research will provide a new idea for designing high-performance materials by mining and analyzing the composition and structure characteristics of coal gangue solid waste itself and broaden the application range of high-value-added coal gangue solid waste.

Transformative and sustainable insights of agricultural waste-based adsorbents for water defluoridation: Biosorption dynamics, economic viability, and spent adsorbent management

With the progression of civilization, the harmony within nature has been disrupted, giving rise to various ecocidal activities that are evident in every spheres of the earth. These activities have had a profound and far-reaching impact on global health. One significant example of this is the presence of fluoride in groundwater exceeding acceptable limits, resulting in the widespread occurrence of "Fluorosis" worldwide. It is imperative to mitigate the concentration of fluoride in drinking water to meet safety standards. While various defluoridation techniques exist, they often have drawbacks. Biosorption, being a simple, affordable and eco-friendly method, has gained preference for defluoridation. However, its limited commercialization underscores the pressing need for further research in this domain. This comprehensive review article offers a thorough examination of the defluoridation potential of agro-based adsorbents, encompassing their specific chemical compositions and preparation methods. The review presents an in-depth discussion of the factors influencing fluoride biosorption and conducts a detailed exploration of adsorption isotherm and adsorption kinetic models to gain a comprehensive understanding of the nature of the adsorption process. Furthermore, it evaluates the commercial viability through an assessment of regeneration potential and a cost analysis of these agro-adsorbents, with the aim of facilitating the scalability of the defluoridation process. The elucidation of the adsorption mechanism and recommendations for overcoming challenges in large-scale implementation offer a comprehensive outlook on this eco-friendly and sustainable approach to fluoride removal. In summary, this review article equips readers with a lucid understanding of agro-adsorbents, elucidates their ideal conditions for improved performance, offers a more profound insight into the fluoride biosorption mechanism, and introduces the concept of effective spent adsorbent management.

Synthesis of rare-earth metal-organic frameworks to construct high-resolution sensing array for multiplex anions detection, cell imaging and blood phosphorus monitoring

Accurate detection and differentiation of multiple anions is still a difficult problem due to their wide variety, structural similarity, and mutual interference. Hence, four rare-earth metal-organic frameworks (RE-MOFs) including Dy-MOFs, Er-MOFs, Tb-MOFs and Y-MOFs are successfully prepared by using TCPP as the ligand and rare-earth ions as the metal center via coordination chelation. It is found that 7 anions can light up their fluorescence. Thus, a high-resolution sensing array based on RE-MOFs nanoprobes is employed to differentiate these anions from intricate analytes in real-time scenarios. The distinctive host-guest response promotes the RE-MOFs nanoprobes to selectively extract the target anions from the complex samples. By taking advantage of the cross-response between RE-MOFs nanoprobes and anions, it allows to create an array for detecting target analytes using pattern recognition. Additionally, RE-MOFs nanoprobes also facilitate the quantitative analysis of these anions (PO43-, H2PO4-, HPO42-, F-, S2-, CO32- and C2O42-). More importantly, the exceptional effectiveness of this method has been demonstrated through various successful applications, including quality monitoring of 8 toothpaste brands, intracellular phosphate imaging, and blood phosphorus detection in mice with vascular calcification. These findings provide robust evidence for the efficacy and reliability of the RE-MOFs nanoprobes array for anion recognition.

Recent insights into mechanism of modified bio-adsorbents for the remediation of environmental pollutants

Rapid industrialization has exacerbated the hazard to health and the environment. Wide spectrums of contaminants pose numerous risks, necessitating their disposal and treatment. There is a need for further remediation methods since pollutant residues cannot be entirely eradicated by traditional treatment techniques. Bio-adsorbents are gaining popularity due to their eco-friendly approach, broad applicability, and improved functional and surface characteristics. Adsorbents that have been modified have improved qualities that aid in their adsorptive nature. Adsorption, ion exchange, chelation, surface precipitation, microbial uptake, physical entrapment, biodegradation, redox reactions, and electrostatic interactions are some of the processes that participate in the removal mechanism of biosorbents. These processes can vary depending on the particular biosorbent and the type of pollutants being targeted. The systematic review focuses on the many modification approaches used to remove environmental contaminants. Different modification or activation strategies can be used depending on the type of bio-adsorbent and pollutant to be remediated. Physical activation procedures such as ultrasonication and pyrolysis are more commonly used to modify bio-adsorbents. Ultrasonication process improves the adsorption efficiency by 15-25%. Acid and alkali modified procedures are the most effective chemical activation strategies for adsorbent modification for pollution removal. Chemical modification increases the removal to around 95-99%. The biological technique involving microbial culture is an emerging field that needs to be investigated further for pollutant removal. A short evaluation of modified adsorbents with multi-pollutant adsorption capability that have been better eliminated throughout the adsorption process has been provided.

Wastewater treatment using nanodiamond and related materials

Nanodiamonds (NDs) are zero-dimensional (0D) carbon-based nanoparticles with SP3/SP2-hybridized carbon atoms that have shown great potential in wastewater treatment areas due to their high surface area, chemical stability, and unique adsorption properties. They can efficiently remove a wide range of pollutants from water, including heavy metals, organic compounds, and dyes via various mechanisms such as electrostatic interactions, π-π stacking, and ion exchange. NDs can be functionalized following different surface chemistries, enabling tailored surface properties and enhanced pollutant adsorption capabilities. This review covers recent research on the application of nanodiamonds in wastewater treatment domain with a major emphasis on adsorption, photocatalytic degradation, and membrane separation, highlighting their promising performances, challenges, and future directions.

Remediation of water tainted with noxious aspirin and fluoride ion using UiO-66-NH2 loaded peanut shell

One green adsorbent, UiO-66-NH2 modified peanut shell (c-PS-MOF), was prepared in a green synthetic route for improving the capture level of aspirin (ASP) and fluoride ion (F-). The adsorption properties of c-PS-MOF were evaluated by batch experiments and its physicochemical properties were explored by various characterization methods. The results showed that c-PS-MOF exhibited a wide range of pH applications (ASP: 2-10; F-: 3-12) and high salt resistance in the capturing processes of ASP and F-. The unit adsorption capacity of c-PS-MOF was as high as 84.7 mg·g-1 for ASP as pH = 3 and 11.2 mg·g-1 for F- under pH = 6 at 303 K from Langmuir model, respectively. When the solid-liquid ratio was 2 g·L-1, the content of ASP (C0 = 100 mg·L-1) and F- (C0 = 20 mg·L-1) in solution can be reduced to 0.48 mg·L-1 and 1.05 mg·L-1 separately. The recycling of c-PS-MOF can be realized with 5 mmol·L-1 NaOH as eluent. Analysis of simulated water samples showed that c-PS-MOF could be used to remove ASP and F- from actual water. The c-PS-MOF is promising to bind ASP and F- from rivers, lakes, etc.

Iron functionalized silica particles as an ingenious sorbent for removal of fluoride from water

The paucity of safe drinking water remains a global concern. Fluoride is a pollutant prevalent in groundwater that has adverse health effects. To resolve this concern, we devised a silica-based defluoridation sorbent from pumice rock obtained from the Paka volcano in Baringo County, Kenya. The alkaline leaching technique was used to extract silica particles from pumice rock, which were subsequently modified with iron to enhance their affinity for fluoride. To assess its efficacy, selected borehole water samples were used. Scanning electron microscopy, X-ray diffraction, Fourier transform infrared and X-ray fluorescence spectroscopy was used to characterize the sorbent. The extracted silica particles were 96.71% pure and amorphous, whereas the iron-functionalized silica particles contained 93.67% SiO₂ and 2.93% Fe₂O₃. The optimal pH, sorbent dose and contact time for defluoridation of a 20 mg/L initial fluoride solution were 6, 1 g and 45 min, respectively. Defluoridation followed pseudo-second-order kinetics and fitted Freundlich's isotherm. Fluoride levels in borehole water decreased dramatically; Intex 4.57-1.13, Kadokoi 2.46-0.54 and Naudo 5.39-1.2 mg/L, indicating that the silica-based sorbent developed from low-cost, abundant and locally available pumice rock is efficient for defluoridation.

A Novel Silver-based Metal-Organic Framework Incorporated into Nanofibrous Chitosan Coatings for Bone Tissue Implants

In this work, new multilayer nanocomposite coatings comprised of chitosan (CS) nanofibers functionalized using an innovative silver base metal-organic framework (SOF) were developed. The SOFs were produced via a facile process using green and environmental-friendly materials. The CS-SOF nanocomposites were coated on hierarchical oxide (HO) layer fabricated on titanium surfaces by an innovative two-step etching process. X-ray diffraction revealed fruitful production of the SOF NPs and their stable crystalline structure within the nanocomposite coatings. Energy-dispersive x-ray spectroscopy approved uniform SOFs distribution in the CS-SOF nanocomposites. Atomic force microscopy indicated more than 700% increased nanoscale roughness for treated surfaces compared to the bare sample. In vitro MTT assay revealed proper cell viabilities on the samples, however, high SOFs concentration led to less biocompatibility. All coatings indicated positive cell proliferation rates up to 45% after 72 h. Antibacterial studies showed significant inhibition zones against Escherichia coli and Staphylococcus aureus bacteria with 100-200% effective antibacterial activities. Electron microscopy showed excellent cell attachments on the CS-SOF nanocomposites with expanded morphologies and long filopodia. The prepared coatings exhibited high apatite formation capability and bone bioactivity.

Constructing functional metal-organic frameworks by ligand design for environmental applications

Metal-organic frameworks (MOFs) with unique physical and chemical properties are composed of metal ions/clusters and organic ligands, including high porosity, large specific surface area, tunable structure and functionality, which have been widely used in chemical sensing, environmental remediation, and other fields. Organic ligands have a significant impact on the performance of MOFs. Selecting appropriate types, quantities and properties of ligands can well improve the overall performance of MOFs, which is one of the critical issues in the synthesis of MOFs. This article provides a comprehensive review of ligand design strategies for functional MOFs from the number of different types of organic ligands. Single-, dual- and multi-ligand design strategies are systematically presented. The latest advances of these functional MOFs in environmental applications, including pollutant sensing, pollutant separation, and pollutant degradation are further expounded. Furthermore, an outlook section of providing some insights on the future research problems and prospects of functional MOFs is highlighted with the purpose of conquering current restrictions by exploring more innovative approaches.

Preparation of MOF/polypyrrole and flower-like MnO2 electrodes by electrodeposition: High-performance materials for hybrid capacitive deionization defluorination

Fluorine pollution has become a global public health problem due to its adverse health effects. Adsorption is the primary method for removing fluoride from drinking water. However, the adsorption method has disadvantages such as difficulty in recovering the adsorbent, and the need to add additional chemicals for regeneration, thereby causing secondary pollution, which limits further industrial applications. Capacitive deionization (CDI), as an emerging water treatment technology, has attracted widespread attention due to its advantages of simple operation, low energy consumption and less environmental impact. In this study, a polypyrrole (PPy) film was prepared on a graphite substrate by electrodeposition, and then metal-organic framework Ce/Zn-BDC-NH₂ (CZBN) was deposited on the PPy film by electrophoretic deposition to obtain CZBN/PPy electrode was obtained. The CZBN/PPy anode was then coupled with the MnO₂ cathode for capacitive removal of fluoride in a CDI cell. Both CZBN/PPy and MnO₂ electrodes exhibit pseudocapacitive behavior, which can selectively and reversibly intercalate F^- (CZBN/PPy) and Na⁺ (MnO₂) ions. As expected, the CZBN/PPy-MnO₂ system exhibits excellent fluorine removal performance. In 1.2 V, 100 mg/L F^- solution, the F^- removal capacity can reach 55.12 mg/g. It has high F^- selectivity in the presence of some common anions, and can maintain high F^- removal ability even after five adsorption regeneration processes. The mechanism of F^- removal was studied by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). F^- was mainly removed by electrostatic interaction and ion exchange with hydroxyl. The excellent defluorination performance of the CZBN/PPy-MnO₂ system makes it have good practical application prospects.

A Zn(II)-Metal-Organic Framework Based on 4-(4-Carboxy phenoxy) Phthalate Acid as Luminescent Sensor for Detection of Acetone and Tetracycline

As hazardous environmental pollutants, residual tetracycline (TC) and acetone are harmful to the ecosystem. Therefore, it is necessary to detect the presence of these pollutants in the environment. In this work, using Zn (II) salt, 4-(4-carboxy phenoxy) phthalic acid (H₃L), and 3,5-bis(1-imidazolyl) pyridine (BMP), a new metal-organic framework (Zn-MOF) known as [Zn₃(BMP)₂L₂(H₂O)₄]·2H₂O was synthesized using a one-pot hydrothermal method. The Zn-MOF has a three-dimensional framework based on the [Zn1N₂O₂] and [Zn2N₂O₄] nodes linked by a tridentate bridge BMP ligand and an L ligand with the μ₁:η¹η⁰/μ₁:η¹η⁰/μ₀:η⁰η⁰ coordination mode. There were two kinds of left- and right-handed helix chains, Zn1-BMP and Zn1-BMP-Zn1-L. The complex was stable in aqueous solutions with pH values of 4-10. The Zn-MOF exhibited a strong emission band centered at 385 nm owing to the π*→π electron transition of the ligand. It showed high luminescence in some common organic solvents as well as in the aqueous solutions of pH 4-10. Interestingly, TC and acetone effectively quenched the luminescence of the Zn-MOF in aqueous solution and enabled the Zn-MOF to be used as a sensor to detect TC and acetone. The detection limits of TC and acetone were observed to be 3.34 µM and 0.1597%, respectively. Even in acidic (pH = 4) and alkaline (pH = 10) conditions, the Zn-MOF showed a stable luminescence sensing capability to detect TC. Luminescence sensing of the Zn-MOF for TC in urine and aquaculture wastewater systems was not affected by the interfering agent. Furthermore, the mechanism of sensing TC was investigated in this study. Fluorescence resonance energy transfer and photoinduced electron transfer were found to be the possible quenching mechanisms via UV-Vis absorption spectra/the excitation spectra measurements and DFT calculations.

Development of carbazole-based fluorescent probe for highly sensitive application in fluoride ion detection

Fluorine is a necessary element for human, which is closely related to life activities, such as metabolism of teeth and bone tissue. A small amount of fluoride ions can promote the strengthen of our body. However, a large amount of fluoride ions will damage the human immune system to produce organ diseases. Sensitive and rapid detection of fluoride ions has attracted great interests for researchers. In this work, a reactive fluorescent probe SCP for detection of fluoride ions with high quantum yield was designed and synthesized based on the carbazole ring. Subsequently, the photophysical properties of the probe SCP were carefully studied. At last, SCP performed 62.8% quantum yield in physiological condition, excellent ability of quantitative analysis, well selectivity, and distinguishing features for HepG2 cell imaging.

Metal-organic frameworks: A promising option for the diagnosis and treatment of Alzheimer's disease

Beta-amyloid (Aβ) peptide is one of the main characteristic biomarkers of Alzheimer's disease (AD). Previous clinical investigations have proposed that unusual concentrations of this biomarker in cerebrospinal fluid, blood, and brain tissue are closely associated with the AD progression. Therefore, the critical point of early diagnosis, prevention, and treatment of AD is to monitor the levels of Aβ. In view of the potential of metal-organic frameworks (MOFs) for diagnosing and treating the AD, much attention has been focused in recent years. This review discusses the latest advances in the applications of MOFs for the early diagnosis of AD via fluorescence and electrochemiluminescence (ECL) detection of AD biomarkers, fluorescence detection of the main metal ions in the brain (Zn2+, Cu2+, Mn2+, Fe3+, and Al3+) in addition to magnetic resonance imaging (MRI) of the Aβ plaques. The current challenges and future strategies for translating the in vitro applications of MOFs into in vivo diagnosis of the AD are discussed.

Adsorption Behavior of a Gd-Based Metal-Organic Framework toward the Quercetin Drug: Effect of the Activation Condition

A carboxylate gadolinium-based metal-organic framework (Gd-MOF) is an exceptional candidate for magnetic resonance imaging agents, but its low drug adsorption capacity hinders this MOF from being used as a theragnostic agent. In this work, the Gd-MOF was synthesized by a simple solvothermal method. Then, different activation situations, including various solvents over different time periods, were applied to enhance the specific surface area of the synthesized MOF. Different characterization analyses such as X-ray diffraction and Brunauer-Emmett-Teller along with experimental quercetin adsorption tests were done to study the crystalline and physical properties of various activated MOFs. In the following, the MOF activated by ethanol for 3 days (3d-E) was chosen as the best activated MOF due to its crystallinity, highest specific surface area, and drug adsorption capacity. More explorations were done for the selected MOF, including the drug adsorption isotherm, thermodynamics, and pH effect of adsorption. The results show that the activation process substantially affects the crystallinity, morphology, specific surface area, and drug adsorption capacity of Gd-MOFs. An optimized activation condition is proposed in this work, which shows an impressive enhancement of the specific surface area of Gd-MOFs just by simple solvent exchange method employment.

A new mode of luminescence in lanthanide oxalates metal–organic frameworks

Two lanthanide metal–organic frameworks [Ln-MOFs, Ln = Eu(III), Tb(III)] composed of oxalic acid and Ln building units were hydrothermally synthesized and fully characterized by powder X-ray diffraction, Fourier-transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscope, and energy-dispersive X-ray spectroscopy. Furthermore, their magnetic susceptibility measurements were obtained using SQUID based vibrating sample magnetometer (MPMS 3, Quantum Design). Both Ln-MOFs exhibited highly efficient luminescent property. Solid-state photoluminescence (PL) measurements revealed phosphorescence emission bands of Eu-MOF and Tb-MOF centered at 618 nm (red emission) and 550 nm (green emission) upon excitation at 396 nm and 285 nm, respectively. Eu-MOF and Tb-MOF displayed a phosphorescence quantum yield of 53% and 40%, respectively. Time-resolved PL analyses showed very long lifetime values, at 600 and 1065 ± 1 µs for Eu-MOF and Tb-MOF, respectively. Calculations performed by density functional theory indicated a charge transfer form metal centres to the ligand which was in good agreement with the experimental studies. Therefore, this new mode of highly photoluminescent MOF materials is studied for the first time which paves the way for better understanding of these systems for potential applications.

Nitrogen-doped carbon dots coupled with morin-Al3+: Cleverly design an integrated sensing platform for ratiometric optical dual-mode and smartphone-assisted visual detection of fluoride ion

Ratiometric fluorescence sensor has high selectivity and good sensitivity; however, its development is limited by intricate design, tedious synthesis, etc. Herein, a facile and effective ratiometric fluorescence sensing platform for fluoride ion (F^-) detection was developed by simply combining nitrogen-doped carbon dots (N-CDs) and morin-Al³⁺ based on inner filter effect (IFE). The competitive binding of F^- to Al³⁺ obviously decreased morin-Al³⁺ fluorescence and increased N-CDs fluorescence, attributing to the inhibition of IFE between N-CDs and morin-Al³⁺. The as-constructed ratiometric fluorescence sensing platform can be used for F^- detection with a wide linear range (0.5-150 μM) and a low detection limit (55.8 nM). Interestingly, with the introduction of F^- into the N-CDs/morin-Al³⁺ sensing platform, a distinguishable change in fluorescence color from green to blue enabled the N-CDs/morin-Al³⁺ system to be used as a smartphone-assisted visual sensing platform for F^- detection with a detection limit of 2.09 μM. This platform was successfully applied for the onsite monitoring of F^- in various water samples with satisfying results. These findings provide a novel guidance for the facile construction of a ratiometric optical dual-mode and smartphone-assisted sensing platform based on CDs, revealing the broad application prospect of CDs in environmental monitoring field.

Nickel and iron-based metal-organic frameworks for removal of organic and inorganic model contaminants

Metal-organic frameworks (MOFs) are a promising class of porous nanomaterials in the field of environmental remediation. Ni-MOF and Fe-MOF were chosen for their advantages such as structural robustness and ease of synthesis route. The structure of prepared MOFs was characterized using FE-SEM, XRD, FTIR, and N₂ adsorption-desorption. The efficiency of MOFs to remove organic model contaminants (anionic Alizarin Red S (ARS) and cationic malachite green (MG) and inorganic fluoride was studied. Fe-MOF and Ni-MOF adsorbed 67, 88, 6% and 32, 5, and 9% of fluoride, ARS, and MG, respectively. Further study on ARS adsorption by Fe-MOF showed that the removal efficiency was high in a wide range of pH from 3 to 9. Moreover, dye removal was directly increased by adsorbent mass (0.1-0.75 g/L) and decreased by ARS concentration (25-100 mg/L). The pseudo-first-order kinetic model and Langmuir isotherm model with a q_max of 176.68 mg/g described the experimental data well. The separation factor, K_L, was in the range of 0-1, which means the adsorption process was favorable. In conclusion, Fe-MOF showed remarkable adsorption of organic and inorganic model contaminants.

Electro dialysis reversal (EDR) performance for reject brine treatment of reverse osmosis desalination system

In this study, the performance of bench-scale EDR was evaluated using the samples taken from the 1st and the 2nd stage RO from the Brackish Water Reverse Osmosis (BWRO) plant in Eshtehard, Iran. The measurements indicated that original TDS of the aquifer brackish water was equal to 3,229–3,664 mg/L, whereas TDS of the 1^st stage RO brine was between 5,500 and 7,700 mg/L, that TDS of the 2^nd stage RO brine was in the range of 9,500–10,600 mg/L. A batch bench-scale EDR system of 12 l/h was used with a direct electric current at three different scenarios. In the first, the brine was fed at 20°C (as a reference regulated point). In the second, temperature (14, 20, 26.5°C), and in the third, voltage were changed (6, 12, 18, 24 V) to investigate their influences on performance of the EDR process, while the other operational parameters (feed flow rate, recovery ratio, quality of feed brine)were kept constant. Based on the data analysis using the ANOVA and DUNCAN tests for the second and third scenarios, it was observed that the optimum TDS removal efficiency of the EDR process can be at temperature of 26.5°C and voltage of 18 V. On the other hand, the successful performance of the bench-scale EDR in reducing the 29,000 mg/L TDS and the 45,000 μmhos/cm EC of the 2^nd stage brine to 1,716 mg/L (TDS) and 2,640 μmhos/cm (EC) (at 26.5°C and 24V) could be considered as the main achievement of this research. Overall, the hybrid process RO-EDR-RO can be considered as the best technical, environmental and economical scenario for the development of Eshtehard Desalination Plant phase 2 at full scale.

Amino-Functionalized Single-Lanthanide Metal-Organic Framework as a Ratiometric Fluorescent Sensor for Quantitative Visual Detection of Fluoride Ions

Excessive content of fluoride ions (F^-) in water will lead to water pollution and endanger human health, so the research on the method of low-cost, rapid, and efficient detection of F^- is of particular significance. In this work, an amino-functionalized ligand with an appropriate triplet energy excited state, 2'-amino-[1,1':4',1″-terphenyl]-3,3″,5,5″-tetracarboxylic acid (H₄TPTC-NH₂), was selected to construct a luminescent single-lanthanide metal-organic framework, EuTPTC-NH₂, with uncoordinated amino groups for the detection of F^-. Based on host-guest interactions, that is, hydrogen bonds formed between the free amino groups and F^- ions, EuTPTC-NH₂ was developed as a ratiometric fluorescence probe for F^- detection with good anti-interference ability, low detection limit, high water stability, and selectivity. It was found that EuTPTC-NH₂ has an excellent linear response to F^- in the concentration range of 0-80 μM with high sensitivity and a low detection limit of 11.26 μM. A hydrogel membrane based on the combination of EuTPTC-NH₂ and agarose was also prepared for the quantitative visual detection of F^- in water.

Efficient removal of heavy metal ions from aqueous media by unmodified and modified nanodiamonds

This article deals with the adsorption performances of the unmodified nanodiamond (ND) and thermally oxidized nanodiamond (Ox-ND) for the removal of different heavy metal ions such as Fe (III), Cu (II), Cr (VI), and Cd (II) from wastewater. The adsorption capacities of the ions onto adsorbents are higher and follow the order: Ox-ND-3 > Ox-ND-1.5 > ND, which is consistent with their surface areas, zeta potentials, and the presence of carboxyl groups, suggesting that electrostatic attractions between the positive metal ions and the negatively charged adsorbents are the predominant adsorption mechanisms. Adsorption capacities of these adsorbents were found to be 26.8, 31.3, and 45.7 mg/g for Fe (III), 25.2, 30.5, and 44.5 mg/g for Cu (II), 33.6, 44.1, and 55.9 mg/g for Cr (VI), and 40.9, 52.9, and 67.9 mg/g for Cd (II) over ND, Ox-ND-1.5, and Ox-ND-3, respectively. The impact of various operating parameters such as agitation time, initial metal ion concentration, temperature, pH solution, adsorbent dosage, and coexistence of the metal ions on the adsorption performance of Ox-ND-3 towards Cd (II) ions along with the batch adsorption experiments were performed. The equilibrium was reached in 120 min and adsorption data were fitted well with the pseudo-second-order kinetic as well as the Freundlich isotherm models. Adsorption process was spontaneous and exothermic, while the maximum removal efficiency of Cd (II) ions occurred at pH of 6.9 and at 4 g/L dosage. These findings demonstrated that thermally oxidized nanodiamond (Ox-ND) can be a versatile adsorbent to remove the Cd (II) ions from wastewater.

Carbon dots capped cerium oxide nanoparticles for highly efficient removal and sensitive detection of fluoride

Since the excess exposure to F^- may induce serious issues to human health, the effective adsorption and sensitive detection of F^- is essential. Therefore, carbon dots (CDs) capped CeO₂ (CeO₂@CDs) was synthesized via hydrothermal treatment of tannic acid and CeCl₃. Due to abundant phenolic hydroxyl are reserved and excellent hydrophilicity, CeO₂@CDs possess high F^- adsorption capacity. The partition coefficient parameters (PC) are determined to be 2.65 L/g, which is comparable with previous work. The kinetics results and adsorption isotherm are consistent with pseudo-second-order model and Freundlich model, respectively, indicating the chemisorption dominate the adsorption, mainly via the ion exchange between hydroxyl and F^-. Since phenolic hydroxyl existed on the CeO₂@CDs, synergetic effect of CDs and CeO₂ contribute to superior ROS eliminating capacity, even at acidic conditions. Moreover, due to the ROS scavenging of CeO₂ @CDs abilities can be potentiated by F^-, colorimetric detection of F^- can be realized via horseradish peroxidase as an indicator. The linear range is 0.3-2.1 mM with limit of detection is 0.13 mg/L. The current results imply that CeO₂@CDs possess potential in both efficient removal and sensitive detection of F^- related contamination issues and elucidation of development to address other anions related issues.

A Theoretical Study of the Sensing Mechanism of a Schiff-Based Sensor for Fluoride

In the current work, we studied the sensing process of the sensor (E)-2-((quinolin-8ylimino) methyl) phenol (QP) for fluoride anion (F^-) with a "turn on" fluorescent response by density functional theory (DFT) and time-dependent density functional theory (TDDFT) calculations. The proton transfer process and the twisted intramolecular charge transfer (TICT) process of QP have been explored by using potential energy curves as functions of the distance of N-H and dihedral angle C-N=C-C both in the ground and the excited states. According to the calculated results, the fluorescence quenching mechanism of QP and the fluorescent response for F^- have been fully explored. These results indicate that the current calculations completely reproduce the experimental results and provide compelling evidence for the sensing mechanism of QP for F^-.

Stable Metal-Organic Frameworks for Fluorescent Detection of Tetracycline Antibiotics

The rapid detection of antibiotics in agricultural products is of great significance. In this work, two stable fluorescent metal-organic frameworks (MOFs), BUT-178 and BUT-179, are synthesized and used to detect tetracycline antibiotics. Among them, BUT-179 exhibits better performance in the detection of different tetracycline antibiotics in water and eggs. The limits of detection of BUT-179 toward tetracycline, aureomycin, oxytetracycline, and doxycycline all reach the nanomolar level. Furthermore, the cycling tests confirm that BUT-179 can be easily recovered and repeatedly used without an obvious performance loss. This work demonstrates the excellent application potential of MOFs for food safety, especially the fluorescence detection of antibiotics in foods.

New insights into the capture performance and mechanism of hazardous metals Cr3+ and Cd2+ onto an effective layered double hydroxide based material

The phosphonate functionalized layered double hydroxide constructed through intercalation reaction, and efficiently applied to capture toxicant metal ions. The characterization results indicated that the functionalized composite with many functional groups has adsorption potential to heavy metals. The strong chelation of the phosphonate groups with heavy metal ions proved it an excellent adsorbent leading to a maximum adsorption capacity of 156.95 mg/g (Cr³⁺) and 198.34 mg/g (Cd²⁺) separately. The data of kinetics and isotherm revealed that the chelating adsorption was dominated by chemisorption and monolayer interaction. Notably, the spent adsorbent presented satisfactory reusability after six cycles. Furthermore, the Forcite simulation with the CLAYFF-CVFF force field implied that the critical mechanism for modifiers and the surface sites of the interlayer is electrostatic interaction. Our in-depth exploration in terms of the weak interactions not only demonstrated the strength and nature but also provided a novel way to intuitively capture the type of interactions that occurred around interesting regions. In the end, we made detailed investigations on the chelation mechanism, and the covalent nature played a leading role in the binding interaction. This work provides a valuable strategy for researchers to design novel materials in practice.

A switchable sensor and scavenger: detection and removal of fluorinated chemical species by a luminescent metal-organic framework

Fluorosis has been regarded as a worldwide disease that seriously diminishes the quality of life through skeletal embrittlement and hepatic damage. Effective detection and removal of fluorinated chemical species such as fluoride ions (F⁻) and perfluorooctanoic acid (PFOA) from drinking water are of great importance for the sake of human health. Aiming to develop water-stable, highly selective and sensitive fluorine sensors, we have designed a new luminescent MOF In(tcpp) using a chromophore ligand 2,3,5,6-tetrakis(4-carboxyphenyl)pyrazine (H₄tcpp). In(tcpp) exhibits high sensitivity and selectivity for turn-on detection of F⁻ and turn-off detection of PFOA with a detection limit of 1.3 μg L⁻¹ and 19 μg L⁻¹, respectively. In(tcpp) also shows high recyclability and can be reused multiple times for F⁻ detection. The mechanisms of interaction between In(tcpp) and the analytes are investigated by several experiments and DFT calculations. These studies reveal insightful information concerning the nature of F⁻ and PFOA binding within the MOF structure. In addition, In(tcpp) also acts as an efficient adsorbent for the removal of F⁻ (36.7 mg g⁻¹) and PFOA (980.0 mg g⁻¹). It is the first material that is not only capable of switchable sensing of F⁻ and PFOA but also competent for removing the pollutants via different functional groups.

A robust In-MOF, In(tcpp), demonstrates sensitive detection of the fluorinated chemical species F⁻ and PFOA via distinctly different luminescence signal change, and effective adsorption and removal of both species from aqueous solution.