Complete separation of benzene-cyclohexene-cyclohexane mixtures via temperature-dependent molecular sieving by a flexible chain-like coordination polymer

The separation and purification of C6 cyclic hydrocarbons (benzene, cyclohexene, cyclohexane) represent a critically important but energy intensive process. Developing adsorptive separation technique to replace thermally driven distillation processes holds great promise to significantly reduce energy consumption. Here we report a flexible one-dimensional coordination polymer as an efficient adsorbent to discriminate ternary C6 cyclic hydrocarbons via an ideal molecular sieving mechanism. The compound undergoes fully reversible structural transformation associated with removal/re-coordination of water molecules and between activated and hydrocarbon-loaded forms. It exhibits distinct temperature- and adsorbate-dependent adsorption behavior which facilitates the complete separation of benzene, cyclohexene and cyclohexane from their binary and ternary mixtures, with the record-high uptake ratios for C6H6/C6H12 and C6H10/C6H12 in vapor phase and highest binary and ternary selectivities in liquid phase. In situ infrared spectroscopic analysis and ab initio calculations provide insight into the host-guest interactions and their effect on the preferential adsorption and structural transformation.

An Octacarboxylate-Linked Sodium Metal-Organic Framework with High Porosity

Alkali metal-based metal-organic frameworks (MOFs) with permanent porosity are scarce because of their high tendency to coordinate with solvents such as water. However, these MOFs are lightweight and bear gravimetric benefits for gas adsorption related applications. In this study, we present the successful construction of a microporous MOF, designated as HIAM-111, built solely on sodium ions by using an octacarboxylate linker. The structure of HIAM-111 is based on 8-connected Na4 clusters and exhibits a novel topology with an underlying 32,42,8-c net. Remarkably, HAM-111 possesses a robust and highly porous framework with a BET surface area of 1561 m2/g, significantly surpassing that of the previously reported Na-MOFs. Further investigations demonstrate that HIAM-111 is capable of separating C2H2/CO2 and purifying C2H4 directly from C2H4/C2H2/C2H6 with high adsorption capacities. The current work may shed light on the rational design of robust and porous MOFs based on alkali metals.

Separating Xylene Isomers with a Calcium Metal-Organic Framework

The purification of p-xylene (pX) from its xylene isomers represents a challenging but important industrial process. Herein, we report the efficient separation of pX from its ortho- and meta- isomers by a microporous calcium-based metal-organic framework material (HIAM-203) with a flexible skeleton. At 30 °C, all three isomers are accommodated but the adsorption kinetics of o-xylene (oX) and m-xylene (mX) are substantially slower than that of pX, and at an elevated temperature of 120 °C, oX and mX are fully excluded while pX can be adsorbed. Multicomponent column breakthrough measurements and vapor-phase/liquid-phase adsorption experiments have demonstrated the capability of HIAM-203 for efficient separation of xylene isomers. Ab initio calculations have provided useful information for understanding the adsorption mechanism.

Luminescent Metal-Organic Framework for the Selective Detection of Aldehydes

The detection of toxic, hazardous chemical species is an important task because they pose serious risks to either the environment or human health. Luminescent metal-organic frameworks (LMOFs) as alternative sensors offer rapid and sensitive detection of chemical species. Interactions between chemical species and LMOFs result in changes in the photoluminescence (PL) profile of the LMOFs which can be readily detected using a simple fluorometer. Herein, we report the use of a robust, Zn-based LMOF, [Zn5(μ3-OH)2(adtb)2(H2O)5·5 DMA] (Zn-adtb, LMOF-341), for the selective detection of benzaldehyde. Upon exposure to benzaldehyde, Zn-adtb experiences significant luminescent quenching, as characterized through PL experiments. Photoluminescent titration experiments reveal that LMOF-341 has a detection limit of 64 ppm and a Ksv value of 179 M-1 for benzaldehyde. Furthermore, we study the guest-host interactions that occur between LMOF-341 and benzaldehyde through in situ Fourier transform infrared and computational modeling employing density functional theory. The results show that benzaldehyde interacts more strongly with LMOF-341 compared to formaldehyde and propionaldehyde. Our combined studies also reveal that the mechanism of luminescence quenching originates from an electron-transfer process.

Precise Pore Engineering of fcu-Type Y-MOFs for One-Step C2 H4 Purification from Ternary C2 H6 /C2 H4 /C2 H2 Mixtures

The purification of C2 H4 from C2 H6 /C2 H4 /C2 H2 mixtures is of great significance in the chemical industry for C2 H4 production but remains a daunting task. Guided by powerful reticular chemistry principles, herein a systematic study is carried out to engineer pore dimensions and pore functionality of fcu-type Y-based metal-organic frameworks (Y-MOFs) through the construction of a series of eight new structures using linear dicarboxylate linkers with different length and functional groups. This study illustrates how delicate changes in pore size and pore surface chemistry can effectively influence the adsorption preference of C2 H6 , C2 H4 , and C2 H2 by the MOFs. Importantly, clear relations between pore size/pore surface polarity and C2 adsorption selectivities of this series of MOFs are established. In particular, HIAM-326 built on a linker decorated with trifluoromethoxy group shows notably preferential adsorption of C2 H6 and C2 H2 over C2 H4 , with balanced C2 H2 /C2 H4 and C2 H6 /C2 H4 selectivities. This endows the compound with the capability of one-step purification of C2 H4 from C2 H6 /C2 H4 /C2 H2 ternary mixtures, which is validated by breakthrough measurements where high purity C2 H4 (99.9%+) can be obtained directly from the separation column. Its adsorption thermodynamics and underlying selective adsorption mechanisms are further revealed by ab initio calculations.

Magnetically Induced Binary Ferrocene with Oxidized Iron

Ferrocene is perhaps the most popular and well-studied organometallic molecule, but our understanding of its structure and electronic properties has not changed for more than 70 years. In particular, all previous attempts of chemically oxidizing pure ferrocene by binding directly to the iron center have been unsuccessful, and no significant change in structure or magnetism has been reported. Using a metal organic framework host material, we were able to fundamentally change the electronic and magnetic structure of ferrocene to take on a never-before observed physically stretched/bent high-spin Fe(II) state, which readily accepts O2 from air, chemically oxidizing the iron from Fe(II) to Fe(III). We also show that the binding of oxygen is reversible through temperature swing experiments. Our analysis is based on combining Mößbauer spectroscopy, extended X-ray absorption fine structure, in situ infrared, SQUID, thermal gravimetric analysis, and energy dispersive X-ray fluorescence spectroscopy measurements with ab initio modeling.

Revisiting Competitive Adsorption of Small Molecules in the Metal-Organic Framework Ni-MOF-74

To precisely evaluate the potential of metal-organic frameworks (MOFs) for gas separation and purification applications, it is crucial to understand how various molecules competitively adsorb inside MOFs. In this paper, we combine in situ infrared spectroscopy with ab initio calculations to investigate the mechanisms associated with coadsorption of several small molecules, including CO, NO, and CO₂ inside the prototypical structure Ni-MOF-74. Surprisingly, we find that the displacement of CO bound inside Ni-MOF-74 (binding energy of 53 kJ/mol) is readily driven by CO₂ exposure, even though CO₂ has a noticeably weaker binding energy of only 41 kJ/mol; meanwhile, the significantly more strongly binding NO molecule (90 kJ/mol) is not able to easily displace bound CO inside Ni-MOF74. These results show that single-phase binding energies of a molecule inside the MOF cannot completely describe their interaction with the MOF in the presence of other guest molecules. We unveil many crucial factors, such as the kinetic barrier, partial pressure, secondary binding sites, and guest-host/lateral interactions that control the coadsorption process and, combined with the binding energy, are better descriptors of the behavior and adsorption of gas mixtures inside MOFs.

CO 2 Capture by Hybrid Ultramicroporous TIFSIX‐3‐Ni under Humid Conditions Using Non‐Equilibrium Cycling

Although pyrazine‐linked hybrid ultramicroporous materials (HUMs, pore size <7 Å) are benchmark physisorbents for trace carbon dioxide (CO₂) capture under dry conditions, their affinity for water (H₂O) mitigates their carbon capture performance in humid conditions. Herein, we report on the co‐adsorption of H₂O and CO₂ by TIFSIX‐3‐Ni—a high CO₂ affinity HUM—and find that slow H₂O sorption kinetics can enable CO₂ uptake and release using shortened adsorption cycles with retention of ca. 90 % of dry CO₂ uptake. Insight into co‐adsorption is provided by in situ infrared spectroscopy and ab initio calculations. The binding sites and sorption mechanisms reveal that both CO₂ and H₂O molecules occupy the same ultramicropore through favorable interactions between CO₂ and H₂O at low water loading. An energetically favored water network displaces CO₂ molecules at higher loading. Our results offer bottom‐up design principles and insight into co‐adsorption of CO₂ and H₂O that is likely to be relevant across the full spectrum of carbon capture sorbents to better understand and address the challenge posed by humidity to gas capture.

Identifying the Gate-Opening Mechanism in the Flexible Metal-Organic Framework UTSA-300

Atomic-level understanding of the gate-opening phenomenon in flexible porous materials is an important step toward learning how to control, design, and engineer them for applications such as the separation of gases from complex mixtures. Here, we report such mechanistic insight through an in-depth study of the pressure-induced gate-opening phenomenon in our earlier reported metal-organic framework (MOF) Zn(dps)₂(SiF₆) (dps = 4,4'-dipyridylsulfide), also called UTSA-300, using isotherm and calorimetry measurements, in situ infrared spectroscopy, and ab initio simulations. UTSA-300 is shown to selectively adsorb acetylene (C₂H₂) over ethylene (C₂H₄) and ethane (C₂H₆) and undergoes an abrupt gate-opening phenomenon, making this framework a highly selective gas separator of this complex mixture. The selective adsorption is confirmed by pressure-dependent in situ infrared spectroscopy, which, for the first time, shows the presence of multiple C₂H₂ species with varying strengths of bonding. A rare energetic feature at the gate-opening condition of the flexible MOF is observed in our differential heat energies, directly measured by calorimetry, showcasing the importance of this tool in adsorption property exploration of flexible frameworks and offering an energetic benchmark for further energy-based fundamental studies. Based on the agreement of this feature with ab initio-based adsorption energies of C₂H₂ in the closed-pore structure UTSA-300a ("a" refers to the activated form), this feature is assigned to the weakening of the H-bond C-H···F formed between C₂H₂ and fluorine of the MOF. Our analysis identifies the weakening of this H-bond, the expansion of the closed-pore MOF upon successive C₂H₂ coadsorption until its volume is close to that of the open-pore MOF, and the spontaneous gate opening to energetically favor C₂H₂ adsorption in the open-pore structure as crucial steps in the gate-opening mechanism in this system.

A Microporous Metal-Organic Framework Incorporating Both Primary and Secondary Building Units for Splitting Alkane Isomers

We demonstrate the assembly of a mononuclear metal center, a hexanuclear cluster, and a V-shaped, trapezoidal tetracarboxylate linker into a microporous metal-organic framework featuring an unprecedented 3-nodal (4,4,8)-c lyu topology. The compound, HIAM-302, represents the first example that incorporates both a primary building unit and a hexanuclear secondary building unit in one structure, which should be attributed to the desymmetrized geometry of the organic linker. HIAM-302 possesses optimal pore dimensions and can separate monobranched and dibranched alkanes through selective molecular sieving, which is of significant value in the petrochemical industry.

Metal-Organic Framework Based Hydrogen-Bonding Nanotrap for Efficient Acetylene Storage and Separation

The removal of carbon dioxide (CO₂) from acetylene (C₂H₂) is a critical industrial process for manufacturing high-purity C₂H₂. However, it remains challenging to address the tradeoff between adsorption capacity and selectivity, on account of their similar physical properties and molecular sizes. To overcome this difficulty, here we report a novel strategy involving the regulation of a hydrogen-bonding nanotrap on the pore surface to promote the separation of C₂H₂/CO₂ mixtures in three isostructural metal-organic frameworks (MOFs, named MIL-160, CAU-10H, and CAU-23, respectively). Among them, MIL-160, which has abundant hydrogen-bonding acceptors as nanotraps, can selectively capture acetylene molecules and demonstrates an ultrahigh C₂H₂ storage capacity (191 cm³ g^-1, or 213 cm³ cm^-3) but much less CO₂ uptake (90 cm³ g^-1) under ambient conditions. The C₂H₂ adsorption amount of MIL-160 is remarkably higher than those for the other two isostructural MOFs (86 and 119 cm³ g^-1 for CAU-10H and CAU-23, respectively) under the same conditions. More importantly, both simulation and experimental breakthrough results show that MIL-160 sets a new benchmark for equimolar C₂H₂/CO₂ separation in terms of the separation potential (Δq_break = 5.02 mol/kg) and C₂H₂ productivity (6.8 mol/kg). In addition, in situ FT-IR experiments and computational modeling further reveal that the unique host-guest multiple hydrogen-bonding interaction between the nanotrap and C₂H₂ is the key factor for achieving the extraordinary acetylene storage capacity and superior C₂H₂/CO₂ selectivity. This work provides a novel and powerful approach to address the tradeoff of this extremely challenging gas separation.

Pore Distortion in a Metal-Organic Framework for Regulated Separation of Propane and Propylene

The development of porous solids for adsorptive separation of propylene and propane remains an important and challenging line of research. State-of-the-art sorbent materials often suffer from the trade-off between adsorption capacity and selectivity. Here, we report the regulated separation of propylene and propane in a metal-organic framework via designed pore distortion. The distorted pore structure of HIAM-301 successfully excludes propane and thus achieved simultaneously high selectivity (>150) and large capacity (∼3.2 mmol/g) of propylene at 298 K and 1 bar. Dynamic breakthrough measurements validated the excellent separation of propane and propylene. In situ neutron powder diffraction and inelastic neutron scattering revealed the binding domains of adsorbed propylene molecules in HIAM-301 as well as host-guest interaction dynamics. This study presents a new benchmark for the adsorptive separation of propylene and propane.

Flexible Zn-MOF with Rare Underlying scu Topology for Effective Separation of C6 Alkane Isomers

Adsorptive separation by porous solids provides an energy-efficient alternative for the purification of important chemical species compared to energy-intensive distillations. Particularly, the separation of linear hexane isomers from its branched counterparts is crucial to produce premium grade gasoline with high research octane number (RON). Herein, we report the synthesis of a new, flexible zinc-based metal-organic framework, [Zn5(μ3-OH)2(adtb)2(H2O)5·5 DMA] (Zn-adtb), constructed from a butterfly shaped carboxylate linker with underlying (4,8)-connected scu topology capable of separating the C6 isomers nHEX, 3MP, and 23DMB. The sorbate-sorbent interactions and separation mechanisms were investigated and analyzed through in situ FTIR, solid state NMR measurements and computational modeling. These studies reveal that Zn-adtb discriminates the nHEX/3MP isomer pair through a kinetic separation mechanism and the nHEX/23DMB isomer pair through a molecular sieving mechanism. Column breakthrough measurements further demonstrate the efficient separation of linear nHEX from the mono- and dibranched isomers.

A switchable sensor and scavenger: detection and removal of fluorinated chemical species by a luminescent metal-organic framework

Fluorosis has been regarded as a worldwide disease that seriously diminishes the quality of life through skeletal embrittlement and hepatic damage. Effective detection and removal of fluorinated chemical species such as fluoride ions (F⁻) and perfluorooctanoic acid (PFOA) from drinking water are of great importance for the sake of human health. Aiming to develop water-stable, highly selective and sensitive fluorine sensors, we have designed a new luminescent MOF In(tcpp) using a chromophore ligand 2,3,5,6-tetrakis(4-carboxyphenyl)pyrazine (H₄tcpp). In(tcpp) exhibits high sensitivity and selectivity for turn-on detection of F⁻ and turn-off detection of PFOA with a detection limit of 1.3 μg L⁻¹ and 19 μg L⁻¹, respectively. In(tcpp) also shows high recyclability and can be reused multiple times for F⁻ detection. The mechanisms of interaction between In(tcpp) and the analytes are investigated by several experiments and DFT calculations. These studies reveal insightful information concerning the nature of F⁻ and PFOA binding within the MOF structure. In addition, In(tcpp) also acts as an efficient adsorbent for the removal of F⁻ (36.7 mg g⁻¹) and PFOA (980.0 mg g⁻¹). It is the first material that is not only capable of switchable sensing of F⁻ and PFOA but also competent for removing the pollutants via different functional groups.

A robust In-MOF, In(tcpp), demonstrates sensitive detection of the fluorinated chemical species F⁻ and PFOA via distinctly different luminescence signal change, and effective adsorption and removal of both species from aqueous solution.

Tuning the Adsorption Properties of Metal-Organic Frameworks through Coadsorbed Ammonia

In this work, we report a novel strategy to increase the gas adsorption selectivity of metal organic framework materials by coadsorbing another molecular species. Specifically, we find that addition of tightly bound NH₃ molecules in the well-known metal-organic framework MOF-74 dramatically alters its adsorption behavior of C₂H₂ and C₂H₄. Combining in situ infrared spectroscopy and ab initio calculations, we find that-as a result of coadsorbed NH₃ molecules attaching to the open metal sites-C₂H₂ binds more strongly and diffuses much faster than C₂H₄, occupying the available space adjacent to metal-bound NH₃ molecules. Most remarkably, C₂H₄ is now almost completely excluded from entering the MOF once C₂H₂ has been loaded. This finding dispels the widespread belief that strongly coadsorbed species in nanoporous materials always undermine their performance in adsorbing or separating weakly bound target molecules. Furthermore, it suggests a new route to tune the adsorption behavior of MOF materials through harnessing the interactions among coadsorbed guests.

Defect Termination in the UiO-66 Family of Metal-Organic Frameworks: The Role of Water and Modulator

The defect concentration in the prototypical metal-organic framework UiO-66 can be well controlled during synthesis, leading to precisely tunable physicochemical properties for this structure. However, there has been a long-standing debate regarding the nature of the compensating species present at the defective sites. Here, we present unambiguous spectroscopic evidence that the missing-linker defect sites in an ambient environment are compensated with both carboxylate and water (bound through intermolecular hydrogen bonding), which is further supported by ab initio calculations. In contrast to the prevailing assumption that the monocarboxylate groups (COO^-) of the modulators form bidentate bonding with two Zr⁴⁺ sites, COO^- is found to coordinate to an open Zr⁴⁺ site in an unidentate mode. The neighboring Zr⁴⁺ site is terminated by a coordinating H₂O molecule, which helps to stabilize the COO^- group. This finding not only provides a new understanding of defect termination in UiO-66, but also sheds light on the origin of its catalytic activity.

Thermally Activated Adsorption in Metal-Organic Frameworks with a Temperature-Tunable Diffusion Barrier Layer

Modification of the external surfaces of metal-organic frameworks offers a new level of control over their adsorption behavior. It was previously shown that capping of MOFs with ethylenediamine (EDA) can effectively retain small gaseous molecules at room temperature. Reported here is a temperature-induced variation in the capping-layer gate-opening mechanism through a combination of in situ infared experiments and ab initio simulations of the capping layer. An atypical acceleration and increase in the loading of weakly adsorbed molecules upon raising the temperature above room temperature is observed. These findings show the discovery of novel temperature-dependent kinetics that goes beyond standard kinetics and suggest a new avenue for tailoring selective adsorption by thermally tuning the surface barrier.

Next-Generation Nonlocal van der Waals Density Functional

The fundamental ideas for a nonlocal density functional theory-capable of reliably capturing van der Waals interactions-were already conceived in the 1990s. In 2004, a seminal paper introduced the first practical nonlocal exchange-correlation functional called vdW-DF, which has become widely successful and laid the foundation for much further research. However, since then, the functional form of vdW-DF has remained unchanged. Several successful modifications paired the original functional with different (local) exchange functionals to improve performance, and the successor vdW-DF2 also updated one internal parameter. Bringing together different insights from almost 2 decades of development and testing, we present the next-generation nonlocal correlation functional called vdW-DF3, in which we change the functional form while staying true to the original design philosophy. Although many popular functionals show good performance around the binding separation of van der Waals complexes, they often result in significant errors at larger separations. With vdW-DF3, we address this problem by taking advantage of a recently uncovered and largely unconstrained degree of freedom within the vdW-DF framework that can be constrained through empirical input, making our functional semiempirical. For two different parameterizations, we benchmark vdW-DF3 against a large set of well-studied test cases and compare our results with the most popular functionals, finding good performance in general for a wide array of systems and a significant improvement in accuracy at larger separations. Finally, we discuss the achievable performance within the current vdW-DF framework, the flexibility in functional design offered by vdW-DF3, as well as possible future directions for nonlocal van der Waals density functional theory.

Molecular Rectifiers on Silicon: High Performance by Enhancing Top-Electrode/Molecule Coupling

One of the simplest molecular-scale electronic devices is the molecular rectifier. In spite of considerable efforts aimed at understanding structure-property relationships in these systems, devices with predictable and stable electronic properties are yet to be developed. Here, we demonstrate highly efficient current rectification in a new class of compounds that form self-assembled monolayers on silicon. We achieve this by exploiting the coupling of the molecules with the top electrode which, in turn, controls the position of the relevant molecular orbitals. The molecules consist of a silane anchoring group and a nitrogen-substituted benzene ring, separated by a propyl group and imine linkage, and result from a simple, robust, and high-yield synthetic procedure. We find that when incorporated in molecular diodes, these compounds can rectify current by as much as 3 orders of magnitude, depending on their structure, with a maximum rectification ratio of 2635 being obtained in ( E)-1-(4-cyanophenyl)- N-(3-(triethoxysilyl) propyl)methanimine (average R_avg = 1683 ± 458, at an applied voltage of 2 V). This performance is on par with that of the best molecular rectifiers obtained on metallic electrodes, but it has the advantage of lower cost and more efficient integration with current silicon technologies. The development of molecular rectifiers on silicon may yield hybrid systems that can expand the use of silicon toward novel functionalities governed by the molecular species grafted onto its surface.

Topologically guided tuning of Zr-MOF pore structures for highly selective separation of C6 alkane isomers

As an alternative technology to energy intensive distillations, adsorptive separation by porous solids offers lower energy cost and higher efficiency. Herein we report a topology-directed design and synthesis of a series of Zr-based metal-organic frameworks with optimized pore structure for efficient separation of C6 alkane isomers, a critical step in the petroleum refining process to produce gasoline with high octane rating. Zr₆O₄(OH)₄(bptc)₃ adsorbs a large amount of n-hexane but excluding branched isomers. The n-hexane uptake is ~70% higher than that of a benchmark adsorbent, zeolite-5A. A derivative structure, Zr₆O₄(OH)₈(H₂O)₄(abtc)₂, is capable of discriminating all three C6 isomers and yielding a high separation factor for 3-methylpentane over 2,3-dimethylbutane. This property is critical for producing gasoline with further improved quality. Multicomponent breakthrough experiments provide a quantitative measure of the capability of these materials for separation of C6 alkane isomers. A detailed structural analysis reveals the unique topology, connectivity and relationship of these compounds.

The separation of C6 alkane isomers is crucial to the petroleum refining industry, but the distillation methods in place are energy intensive. Here, the authors design a series of topologically-guided zirconium-based metal-organic frameworks with optimized pore structures for efficient C6 alkane isomer separations.

Advanced capabilities for materials modelling with Quantum ESPRESSO

Quantum EXPRESSO is an integrated suite of open-source computer codes for quantum simulations of materials using state-of-the-art electronic-structure techniques, based on density-functional theory, density-functional perturbation theory, and many-body perturbation theory, within the plane-wave pseudopotential and projector-augmented-wave approaches. Quantum EXPRESSO owes its popularity to the wide variety of properties and processes it allows to simulate, to its performance on an increasingly broad array of hardware architectures, and to a community of researchers that rely on its capabilities as a core open-source development platform to implement their ideas. In this paper we describe recent extensions and improvements, covering new methodologies and property calculators, improved parallelization, code modularization, and extended interoperability both within the distribution and with external software.

Capture of organic iodides from nuclear waste by metal-organic framework-based molecular traps

Effective capture of radioactive organic iodides from nuclear waste remains a significant challenge due to the drawbacks of current adsorbents such as low uptake capacity, high cost, and non-recyclability. We report here a general approach to overcome this challenge by creating radioactive organic iodide molecular traps through functionalization of metal-organic framework materials with tertiary amine-binding sites. The molecular trap exhibits a high CH₃I saturation uptake capacity of 71 wt% at 150 °C, which is more than 340% higher than the industrial adsorbent Ag⁰@MOR under identical conditions. These functionalized metal-organic frameworks also serve as good adsorbents at low temperatures. Furthermore, the resulting adsorbent can be recycled multiple times without loss of capacity, making recyclability a reality. In combination with its chemical and thermal stability, high capture efficiency and low cost, the adsorbent demonstrates promise for industrial radioactive organic iodides capture from nuclear waste. The capture mechanism was investigated by experimental and theoretical methods.Capturing radioactive organic iodides from nuclear waste is important for safe nuclear energy usage, but remains a significant challenge. Here, Li and co-workers fabricate a stable metal-organic framework functionalized with tertiary amine groups that exhibits high capacities for radioactive organic iodides uptake.

The influence of isomer purity on trap states and performance of organic thin-film transistors

Organic field-effect transistor (OFET) performance is dictated by its composition and geometry, as well as the quality of the organic semiconductor (OSC) film, which strongly depends on purity and microstructure. When present, impurities and defects give rise to trap states in the bandgap of the OSC, lowering device performance. Here, 2,8-difluoro-5,11-bis(triethylsilylethynyl)-anthradithiophene is used as a model system to study the mechanism responsible for performance degradation in OFETs due to isomer coexistence. The density of trapping states is evaluated through temperature dependent current-voltage measurements, and it is discovered that OFETs containing a mixture of syn- and anti-isomers exhibit a discrete trapping state detected as a peak located at ~ 0.4 eV above the valence-band edge, which is absent in the samples fabricated on single-isomer films. Ultraviolet photoelectron spectroscopy measurements and density functional theory calculations do not point to a significant difference in electronic band structure between individual isomers. Instead, it is proposed that the dipole moment of the syn-isomer present in the host crystal of the anti-isomer locally polarizes the neighboring molecules, inducing energetic disorder. The isomers can be separated by applying gentle mechanical vibrations during film crystallization, as confirmed by the suppression of the peak and improvement in device performance.

Fluorinated benzalkylsilane molecular rectifiers

We report on the synthesis and electrical properties of nine new alkylated silane self-assembled monolayers (SAMs) – (EtO)₃Si(CH₂)_nN = CHPhX where n = 3 or 11 and X = 4-CF_3, 3,5-CF₃, 3-F-4-CF₃, 4-F, or 2,3,4,5,6-F, and explore their rectification behavior in relation to their molecular structure. The electrical properties of the films were examined in a metal/insulator/metal configuration, with a highly-doped silicon bottom contact and a eutectic gallium-indium liquid metal (EGaIn) top contact. The junctions exhibit high yields (>90%), a remarkable resistance to bias stress, and current rectification ratios (R) between 20 and 200 depending on the structure, degree of order, and internal dipole of each molecule. We found that the rectification ratio correlates positively with the strength of the molecular dipole moment and it is reduced with increasing molecular length.

Spin Signature of Nonlocal Correlation Binding in Metal-Organic Frameworks

We develop a proper nonempirical spin-density formalism for the van der Waals density functional (vdW-DF) method. We show that this generalization, termed svdW-DF, is firmly rooted in the single-particle nature of exchange and we test it on a range of spin systems. We investigate in detail the role of spin in the nonlocal correlation driven adsorption of H_{2} and CO_{2} in the linear magnets Mn-MOF74, Fe-MOF74, Co-MOF74, and Ni-MOF74. In all cases, we find that spin plays a significant role during the adsorption process despite the general weakness of the molecular-magnetic responses. The case of CO_{2} adsorption in Ni-MOF74 is particularly interesting, as the inclusion of spin effects results in an increased attraction, opposite to what the diamagnetic nature of CO_{2} would suggest. We explain this counterintuitive result, tracking the behavior to a coincidental hybridization of the O p states with the Ni d states in the down-spin channel. More generally, by providing insight on nonlocal correlation in concert with spin effects, our nonempirical svdW-DF method opens the door for a deeper understanding of weak nonlocal magnetic interactions.

van der Waals forces in density functional theory: a review of the vdW-DF method

A density functional theory (DFT) that accounts for van der Waals (vdW) interactions in condensed matter, materials physics, chemistry, and biology is reviewed. The insights that led to the construction of the Rutgers-Chalmers van der Waals density functional (vdW-DF) are presented with the aim of giving a historical perspective, while also emphasizing more recent efforts which have sought to improve its accuracy. In addition to technical details, we discuss a range of recent applications that illustrate the necessity of including dispersion interactions in DFT. This review highlights the value of the vdW-DF method as a general-purpose method, not only for dispersion bound systems, but also in densely packed systems where these types of interactions are traditionally thought to be negligible.

van der Waals density functionals built upon the electron-gas tradition: facing the challenge of competing interactions

The theoretical description of sparse matter attracts much interest, in particular for those ground-state properties that can be described by density functional theory. One proposed approach, the van der Waals density functional (vdW-DF) method, rests on strong physical foundations and offers simple yet accurate and robust functionals. A very recent functional within this method called vdW-DF-cx [K. Berland and P. Hyldgaard, Phys. Rev. B 89, 035412 (2014)] stands out in its attempt to use an exchange energy derived from the same plasmon-based theory from which the nonlocal correlation energy was derived. Encouraged by its good performance for solids, layered materials, and aromatic molecules, we apply it to several systems that are characterized by competing interactions. These include the ferroelectric response in PbTiO3, the adsorption of small molecules within metal-organic frameworks, the graphite/diamond phase transition, and the adsorption of an aromatic-molecule on the Ag(111) surface. Our results indicate that vdW-DF-cx is overall well suited to tackle these challenging systems. In addition to being a competitive density functional for sparse matter, the vdW-DF-cx construction presents a more robust general-purpose functional that could be applied to a range of materials problems with a variety of competing interactions.

Water interactions in metal organic frameworks

Insight into the structural variation of metal organic framework materials upon hydration.

Structural band-gap tuning in g-C3N4

Experimental and theoretical results uncover an almost perfectly linear relationship between the band gap and structural aspects of g-C₃N₄, allowing the tuning of the frequency at which g-C₃N₄ absorbs light.

Study of van der Waals bonding and interactions in metal organic framework materials

Metal organic framework (MOF) materials have attracted a lot of attention due to their numerous applications in fields such as hydrogen storage, carbon capture and gas sequestration. In all these applications, van der Waals forces dominate the interaction between the small guest molecules and the walls of the MOFs. In this review article, we describe how a combined theoretical and experimental approach can successfully be used to study those weak interactions and elucidate the adsorption mechanisms important for various applications. On the theory side, we show that, while standard density functional theory is not capable of correctly describing van der Waals interactions, functionals especially designed to include van der Waals forces exist, yielding results in remarkable agreement with experiment. From the experimental point of view, we show examples in which IR adsorption and Raman spectroscopy are essential to study molecule/MOF interactions. Importantly, we emphasize throughout this review that a combination of theory and experiment is crucial to effectively gain further understanding. In particular, we review such combined studies for the adsorption mechanism of small molecules in MOFs, the chemical stability of MOFs under humid conditions, water cluster formation inside MOFs, and the diffusion of small molecules into MOFs. The understanding of these phenomena is critical for the rational design of new MOFs with desired properties.

Water cluster confinement and methane adsorption in the hydrophobic cavities of a fluorinated metal-organic framework

Water cluster formation and methane adsorption within a hydrophobic porous metal organic framework is studied by in situ vibrational spectroscopy, adsorption isotherms, and first-principle DFT calculations (using vdW-DF). Specifically, the formation and stability of H2O clusters in the hydrophobic cavities of a fluorinated metal-organic framework (FMOF-1) is examined. Although the isotherms of water show no measurable uptake (see Yang et al. J. Am. Chem. Soc. 2011 , 133 , 18094 ), the large dipole of the water internal modes makes it possible to detect low water concentrations using IR spectroscopy in pores in the vicinity of the surface of the solid framework. The results indicate that, even in the low pressure regime (100 mTorr to 3 Torr), water molecules preferentially occupy the large cavities, in which hydrogen bonding and wall hydrophobicity foster water cluster formation. We identify the formation of pentameric water clusters at pressures lower than 3 Torr and larger clusters beyond that pressure. The binding energy of the water species to the walls is negligible, as suggested by DFT computational findings and corroborated by IR absorption data. Consequently, intermolecular hydrogen bonding dominates, enhancing water cluster stability as the size of the cluster increases. The formation of water clusters with negligible perturbation from the host may allow a quantitative comparison with experimental environmental studies on larger clusters that are in low concentrations in the atmosphere. The stability of the water clusters was studied as a function of pressure reduction and in the presence of methane gas. Methane adsorption isotherms for activated FMOF-1 attained volumetric adsorption capacities ranging from 67 V(STP)/V at 288 K and 31 bar to 133 V(STP)/V at 173 K and 5 bar, with an isosteric heat of adsorption of ca. 14 kJ/mol in the high temperature range (288-318 K). Overall, the experimental and computational data suggest high preferential uptake for methane gas relative to water vapor within FMOF-1 pores with ease of desorption and high framework stability under operative temperature and moisture conditions.

Diffusion of small molecules in metal organic framework materials

Ab initio simulations are combined with in situ infrared spectroscopy to unveil the molecular transport of H2, CO2, and H2O in the metal organic framework MOF-74-Mg. Our study uncovers--at the atomistic level--the major factors governing the transport mechanism of these small molecules. In particular, we identify four key diffusion mechanisms and calculate the corresponding diffusion barriers, which are nicely confirmed by time-resolved infrared experiments. We also answer a long-standing question about the existence of secondary adsorption sites for the guest molecules, and we show how those sites affect the macroscopic diffusion properties. Our findings are important to gain a fundamental understanding of the diffusion processes in these nanoporous materials, with direct implications for the usability of MOFs in gas sequestration and storage applications.

A theoretical study of the hydrogen-storage potential of (H2)4CH4 in metal organic framework materials and carbon nanotubes

The hydrogen-methane compound (H(2))(4)CH(4)-or for short H4M-is one of the most promising hydrogen-storage materials. This van der Waals compound is extremely rich in molecular hydrogen: 33.3 mass%, not including the hydrogen bound in CH(4); including it, we reach even 50.2 mass%. Unfortunately, H4M is not stable under ambient pressure and temperature, requiring either low temperature or high pressure. In this paper, we investigate the properties and structure of the molecular and crystalline forms of H4M, using ab initio methods based on van der Waals DFT (vdW-DF). We further investigate the possibility of creating the pressures required to stabilize H4M through external agents such as metal organic framework (MOF) materials and carbon nanotubes, with very encouraging results. In particular, we find that certain MOFs can create considerable pressure for H4M in their cavities, but not enough to stabilize it at room temperature, and moderate cooling is still necessary. On the other hand, we find that all the investigated carbon nanotubes can create the high pressures required for H4M to be stable at room temperature, with direct implications for new and exciting hydrogen-storage applications.