Metal halide perovskite quantum dots for amphiprotic bio-imaging

Template-Assisted Synthesis of CsPbBr3 Nanocrystals with a Humidity-Induced Fluorescent Response: Mechanism and Sensing Applications

Metal halide perovskites present a vast potential for the development of cutting-edge optoelectronic devices. However, their vulnerability to environmental factors, especially humidity, leads to widely acknowledged stability challenges. On the other hand, such a high sensitivity to water in the atmosphere is an opportunity for humidity sensing applications. In this study, we synthesize lead halide perovskite CsPbBr3 nanocrystals within CaCO3 templates with a porous structure (CsPbBr3@CaCO3) and investigate the mechanisms underlying the fluorescence response to changes in relative humidity. The reversible transformation of CsPbBr3 to CsPb2Br5 leads to the removal of surface defects, which results in an increase in photoluminescence intensity, thereby enabling the determination of ambient relative humidity levels. Moreover, we investigated a mechanism of CsPbBr3 degradation driven by CO2 in humid environments underlying the perovskite transformations. As a proof of concept, we developed a fluorescence-based humidity sensor based on CsPbBr3@CaCO3 with rapid response and recovery times, maintaining performance across multiple cycles.

Ligand-Engineered Hydrophilic Perovskite Enabling Surface Potential-Driven Anions Exchange for Multicolor Biosensing

The difficulty in designing zwitterionic ligands impedes the water-dispersed CsPbX3 perovskite nanocrystals (NCs) and their application as fast anion exchange (FAE) probes in biosensing. This study proposes a design paradigm for zwitterionic ligands predicated upon revealing the mechanism of the SN2 reaction between unsaturated alkylamines (Cn') and haloalkanoic acids (HAAs). Among them, the C=C bond can enhance the nucleophilicity of Cn' and promote the electrostatic adsorption of HAAs onto Cn', i.e., the geometric preorganization process, thereby initiating the SN2 reaction. Moreover, an appropriate "bridge" length enables HAAs to balance the geometric preorganization process and the Sigma hole intensity of the C-Br bond. Zwitterionic ligands derived from oleylamine (C18') and 5-bromovaleric acid (5-BVA) endow CsPbBr3 NCs with water dispersibility, an almost 100 % photoluminescence quantum yield, and enhanced surface potential, facilitating the capture of halide ions and driving the FAE reaction. Using AgI nanoparticles (NPs) as latent anion exchangers, a third FAE strategy is presented for multicolor biosensing. Such a robust biosensing strategy can generate wavelength shift and chromatic difference for biological target molecules, exemplified by H2S, and is ultimately applicable to multicolor assay in biological, environmental and food samples, demonstrating the immense potential of perovskite-based FAE probes in biosensing.

Synthesis, characterization, and practical applications of perovskite quantum dots: recent update

This review paper provides an in-depth analysis of Perovskite quantum dots (PQDs), a class of nanomaterials with unique optical and electronic properties that hold immense potential for various technological applications. The paper delves into the structural characteristics, synthesis methods, and characterization techniques of PQDs, highlighting their distinct advantages over other Quantum Dots (QDs). Various applications of PQDs in fields such as solar cells, LEDs, bioimaging, photocatalysis, and sensors are discussed, showcasing their versatility and promising capabilities. The ongoing advancements in PQD research and development point towards a bright future for these nanostructures in revolutionizing diverse industries and technologies.

Double Layer SiO2-Coated Water-Stable Halide Perovskite as a Promising Antimicrobial Photocatalyst under Visible Light

Halide perovskite nanocrystals (HPNCs) have emerged as promising materials for various light harvesting applications due to their exceptional optical and electronic properties. However, their inherent instability in water and biological fluids has limited their use as photocatalysts in the aqueous phase. In this study, we present highly water-stable SiO2-coated HPNCs as efficient photocatalysts for antimicrobial applications. The double SiO2 layer coating method confers long-term structural and optical stability to HPNCs in water, while the in situ synthesis of lead- and bismuth-based perovskite NCs into the SiO2 shell enhances their versatility and tunability. We demonstrate that the substantial generation of singlet oxygen via energy transfer from HPNCs enables efficient photoinduced antibacterial efficacy under aqueous conditions. More than 90% of Escherichia coli was inactivated under mild visible light irradiation for 6 h. The excellent photocatalytic antibacterial performance suggests that SiO2-coated HPNCs hold great potential for various aqueous phase photocatalytic applications.

Perovskites as Multiphoton Fluorescence Contrast Agents for In Vivo Imaging

Multiphoton fluorescence microscopy is a powerful tool for imaging and exploring biological tissue at subcellular spatial resolution while minimizing photobleaching and autofluorescence. For optimal performance in multiphoton microscopy, materials exhibiting a large multiphoton absorption cross section (σn) and fluorescence quantum yield are desired. Notably, perovskite nanocrystals (CsPbX3, PNCs) exhibit exceptionally large two-, three-, up to five photon absorption cross section (σ2 ∼ 106 GM, σ3 ∼ 10-73 cm6s2 photon-2, σ5 ∼ 10-136 cm10s4 photon-4), along with near unity fluorescence quantum yield, making them desirable for deep tissue applications. Here, we employed PNCs as contrast agents to image mesenchymal stromal cells in a living mouse. The PNCs were stabilized by encapsulating them in a SiO2 matrix (∼60-70 nm in diameter), offering versatility for subsequent surface modification to target specific biological entities for both diagnostic and therapeutic applications. Multiphoton imaging of PNCs offers substantial benefits for dynamic tracking of cells in deep tissue, such as in understanding immune cell migration and other biological processes in both healthy and diseased tissues.

Emergence of Quantum Dots as Innovative Tools for Early Diagnosis and Advanced Treatment of Breast Cancer

Quantum dots (QDs) semiconducting nanomaterials, have garnered attention due to their distinctive properties, including small size, high luminescence, and biocompatibility. In the context of triple-negative breast cancer (TNBC), notorious for its resistance to conventional treatments, QDs exhibit promising potential for enhancing diagnostic imaging and providing targeted therapies. This review underscores recent advancements in the utilization of QDs in imaging techniques, such as fluorescence tomography and magnetic resonance imaging, aiming at the early and precise detection of tumors. Emphasis is placed on the significance of QD design, synthesis and functionalization processes as well as their use in innovative strategies for targeted drug delivery, capitalizing on their ability to selectively deliver therapeutic agents to cancer cells. As the research in this field advances rapidly, this review covers a classification of QDs according to their composition, the characterization techniques than can be used to determine their properties and, subsequently, emphasizes recent findings in the field of TNBC-targeting, highlighting the imperative need to address challenges, like potential toxicity or methodologies standardization. Collectively, the findings explored thus far suggest that QDs could pave the way for early diagnosis and effective therapy of TNBC, representing a significant stride toward precise and personalized strategies in treating TNBC.

Fluorescent solid-state strips based on SiO2 shell-stabilized perovskite nanocrystals applying for magnetic aptasensing detection of aflatoxin B1 toxin in food

In this work, the perovskite fluorescent nanocrystals (CsPbBr3) were successfully synthesized and wrapped with SiO2 shell, utilized for the assembly of solid-state detection strip capable of conveniently and specifically detection of aflatoxin B1 (AFB1). The SiO2 coating aimed to enhance the stability of CsPbBr3 nanocrystals. The resulting CsPbBr3@SiO2 material exhibited remarkable fluorescence properties, and further self-assembled onto solid-state plate, generating AFB1-specific quenched fluorescence at a specific wavelength of 515 nm. When combined with the capture of AFB1 by magnetic nanoparticles conjugated with aptamers (MNPs-Apt), it was achieved the good separation and specific detection of AFB1 toxin in food matrices. The constructed fluorescent solid-state detection strip based on CsPbBr3@SiO2 exhibited good response to AFB1 toxin within a linear range of 0.1-100 ng mL-1 and an impressive detection limit as low as 0.053 ng mL-1. This presents a new strategy for the rapid screening and convenient detection of highly toxic AFB1.

Solvent-tuned perovskite heterostructures enable visual linoleic acid assay and edible oil species discrimination via wavelength shift

Linoleic acid (LA) detection and edible oils discrimination are essential for food safety. Recently, CsPbBr3@SiO2 heterostructures have been widely applied in edible oil assays, while deep insights into solvent effects on their structure and performance are often overlooked. Based on the suitable polarity and viscosity of cyclohexane, we prepared CsPbBr3@SiO2 Janus nanoparticles (JNPs) with high stability in edible oil and fast halogen-exchange (FHE) efficiency with oleylammonium iodide (OLAI). LA is selectively oxidized by lipoxidase to yield hydroxylated derivative (oxLA) capable of reacting with OLAI, thereby bridging LA content to naked-eye fluorescence color changes through the anti-FHE reaction. The established method for LA in edible oils exhibited consistent results with GC-MS analysis (p > 0.05). Since the LA content difference between edible oils, we further utilized chemometrics to accurately distinguish (100%) the species of edible oils. Overall, such elaborated CsPbBr3@SiO2 JNPs enable a refreshing strategy for edible oil discrimination.

Biocompatible Perovskite Nanocrystals with Enhanced Stability for White Light-Emitting Diodes

Recently emerged lead halide perovskite CsPbX3 (X = Cl, Br, and I) nanocrystals (PNCs) have attracted tremendous attention due to their excellent optical properties. However, the poor water stability, unsatisfactory luminescence efficiency, disappointing lead leakage, and toxicity have restricted their practical applications in photoelectronics and biomedical fields. Herein, a controllable encapsulated strategy is investigated to realize CsPbX3 PNCs/PVP @PMMA composites with superior luminescence properties and excellent biocompatibility. Additionally, the synthesized CsPbBr3 and CsPbBr0.6I2.4 PNCs/PVP@PMMA structures exhibit green and red emissions with a maximal photoluminescence quantum yield (PLQY) of about 70.24% and 98.26%, respectively. These CsPbX3 PNCs/PVP@PMMA structures show high emission efficiency, excellent stability after water storage for 18 months, and low cytotoxicity at the PNC concentration at 500 μg mL-1. Moreover, white light-emitting diode (WLED) devices based on mixtures of CsPbBr3 and CsPbBr0.6I2.4 PNCs/PVP@PMMA perovskite structures are investigated, which exhibit excellent warm-white light emissions at room temperature. A flexible manipulation method is used to fabricate the white light emitters based on these perovskite composites, providing a fantastic platform for fabricating solid-state white light sources and full-color displays.

Aqueous-phase dual-functional chiral perovskites for hydrogen sulfide (H2S) detection and antibacterial applications in Escherichia coli

Perovskite nanocrystals (PNCs) have attracted extensive attention for their potential applications in biology. However, only a handful of PNCs have been scrutinized in the biological domain due to issues such as instability, poor dispersion, and size inhomogeneity in polar solvents. The development of dual-functional perovskite nanomaterials with hydrogen sulfide (H2S) sensing and antibacterial capabilities is particularly intriguing. In this study, we prepared chiral quasi-two-dimensional (quasi-2D) perovskite nanomaterials, Bio(S-PEA)2CsPb2Br7 and Bio(R-PEA)2CsPb2Br7, that were uniformly dispersed in aqueous media. The effective encapsulation of methoxypolyethylene glycol amine (mPEG-NH2) improved water stability and uniformity of particle size. Circular dichroism (CD) signals were created by the successful insertion of chiral cations. These perovskites as probes showed a rapid and sensitive fluorescence quenching response to H2S, and the effect of imaging detection was observed at the Escherichia coli (E. coli) level. As antibacterial agents, their pronounced positive charge properties facilitated membrane lysis and subsequent E. coli death, indicating a significant antibacterial effect. This work has preliminary explored the application of chiral perovskites in biology and provides insight into the development of bifunctional perovskite nanomaterials for biological applications.

Sensing Utilities of Cesium Lead Halide Perovskites and Composites: A Comprehensive Review

Recently, the utilization of metal halide perovskites in sensing and their application in environmental studies have reached a new height. Among the different metal halide perovskites, cesium lead halide perovskites (CsPbX3; X = Cl, Br, and I) and composites have attracted great interest in sensing applications owing to their exceptional optoelectronic properties. Most CsPbX3 nanostructures and composites possess great structural stability, luminescence, and electrical properties for developing distinct optical and photonic devices. When exposed to light, heat, and water, CsPbX3 and composites can display stable sensing utilities. Many CsPbX3 and composites have been reported as probes in the detection of diverse analytes, such as metal ions, anions, important chemical species, humidity, temperature, radiation photodetection, and so forth. So far, the sensing studies of metal halide perovskites covering all metallic and organic-inorganic perovskites have already been reviewed in many studies. Nevertheless, a detailed review of the sensing utilities of CsPbX3 and composites could be helpful for researchers who are looking for innovative designs using these nanomaterials. Herein, we deliver a thorough review of the sensing utilities of CsPbX3 and composites, in the quantitation of metal ions, anions, chemicals, explosives, bioanalytes, pesticides, fungicides, cellular imaging, volatile organic compounds (VOCs), toxic gases, humidity, temperature, radiation, and photodetection. Furthermore, this review also covers the synthetic pathways, design requirements, advantages, limitations, and future directions for this material.

Exploiting the Photo-Physical Properties of Metal Halide Perovskite Nanocrystals for Bioimaging

Perovskite nanomaterials have recently been exploited for bioimaging applications due to their unique photo-physical properties, including high absorbance, good photostability, narrow emissions, and nonlinear optical properties. These attributes outperform conventional fluorescent materials such as organic dyes and metal chalcogenide quantum dots and endow them with the potential to reshape a wide array of bioimaging modalities. Yet, their full potential necessitates a deep grasp of their structure-attribute relationship and strategies for enhancing water stability through surface engineering for meeting the stringent and unique requirements of each individual imaging modality. This review delves into this evolving frontier, highlighting how their distinctive photo-physical properties can be leveraged and optimized for various bioimaging modalities, including visible light imaging, near-infrared imaging, and super-resolution imaging.

Trinity Strategy: Enabling Perovskite as Hydrophilic and Efficient Fluorescent Nanozyme for Constructing Biomarker Reporting Platform

Water instability and sensing homogeneity are the Achilles' heel of CsPbX3 NPs in biological fluids application. This work reports the preparation of Mn2+:CsPbCl3@SiO2 yolk-shell nanoparticles (YSNPs) in aqueous solutions created through the integration of ligand, surface, and crystal engineering strategies. The SN2 reaction between 4-chlorobutyric acid (CBA) and oleylamine (OAm) yields a zwitterionic ligand that facilitates the dispersion of YSNPs in water, while the robust SiO2 shell enhances their overall stability. Besides, Mn2+ doping in YSNPs not only introduces a second emission center but also enables potential postsynthetic designability, leading to the switching from YSNPs to MnO2@YSNPs with excellent oxidase (OXD)-like activity. Theoretical calculations reveal that electron transfer from CsPbCl3 to in situ MnO2 and the adsorption-desorption process of 3,3',5,5'-tetramethylbenzidine (TMB) synergistically amplify the OXD-like activity. In the presence of ascorbic acid (AA), Mn4+ in MnO2@YSNPs (fluorescent nanozyme) is reduced to Mn2+ and dissociated, thereby inhibiting the OXD-like activity and triggering fluorescence "turn-on/off", i.e., dual-mode recognition. Finally, a biomarker reporting platform based on MnO2@YSNPs fluorescent nanozyme is constructed with AA as the reporter molecule, and the accurate detection of human serum alkaline phosphatase (ALP) is realized, demonstrating the vast potential of perovskites in biosensing.

Improving the stability of perovskite nanocrystals via SiO2 coating and their applications

Lead halide perovskite nanocrystals (LHP NCs) with outstanding optical properties have been regarded as promising alternatives to traditional phosphors for lighting and next-generation display technology. However, the practical applications of LHP NCs are seriously hindered by their poor stability upon exposure to moisture, oxygen, light, and heat. Hence, various strategies have been proposed to solve this issue. In this review, we have focused our attention on improving the stability of LHP NCs via SiO2 coating because it has the advantages of simple operation, less toxicity, and easy repetition. SiO2 coating is classified into four types: (a) in situ hydrolytic coating, (b) mesoporous silica loading, (c) mediated anchoring, and (d) double coating. The potential applications of SiO2-coated LHP NCs in the field of optoelectronics, biology, and catalysis are presented to elucidate the reliability and availability of SiO2 coating. Finally, the future development and challenges in the preparation of SiO2-coated LHP NCs are analyzed in order to promote the commercialization process of LHP NC-related commodities.

MOF@Au NPs/aptamer fluorescent probe for the selective and sensitive detection of thiamethoxam

The luminescence performance of fluorescent reagents plays a crucial role in fluorescence analysis. Therefore, in this study, a novel bi-ligand Zn-based metal-organic framework, Au nanoparticle (NP) fluorescent material was synthesized using a hydrothermal method with Zn as the metal source. Simultaneously, a DNA aptamer was introduced as a molecular recognition element to develop a Zn-based MOF@Au NPs/DNA aptamer fluorescent probe for the ultra-trace detection of thiamethoxam residues in agricultural products. The probe captured different concentrations of the target molecule, thiamethoxam, through the DNA aptamer, causing a conformational change in the DNA aptamer and bursting the fluorescence of the probe, therefore establishing a fluorometric method for thiamethoxam detection. This method is highly sensitive due to the excellent luminescence properties of the Zn-based MOF@Au NPs, and the DNA aptamer can specifically recognize thiamethoxam, offering high selectivity. The linear range of the method was 2.5-6000 × 10-11  mol L-1 , with a detection limit of 8.33 × 10-12  mol L-1 . This method was applied to the determination of actual samples, such as bananas, and the spiked recovery rate was found to be in the range 84.05-109.07%. Overall, the proposed probe has high sensitivity, high selectivity, and easy operation for the detection of thiamethoxam residues in actual samples.

π-Conjugated Polymer Nanoparticles from Design, Synthesis to Biomedical Applications: Sensing, Imaging, and Therapy

In the past decade, π-conjugated polymer nanoparticles (CPNs) have been considered as promising nanomaterials for biomedical applications, and are widely used as probe materials for bioimaging and drug delivery. Due to their distinctive photophysical and physicochemical characteristics, good compatibility, and ease of functionalization, CPNs are gaining popularity and being used in more and more cutting-edge biomedical sectors. Common synthetic techniques can be used to synthesize CPNs with adjustable particle size and dispersion. More importantly, the recent development of CPNs for sensing and imaging applications has rendered them as a promising device for use in healthcare. This review provides a synopsis of the preparation and functionalization of CPNs and summarizes the recent advancements of CPNs for biomedical applications. In particular, we discuss their major role in bioimaging, therapeutics, fluorescence, and electrochemical sensing. As a conclusion, we highlight the challenges and future perspectives of biomedical applications of CPNs.

One-Step Ultrasonic Preparation of Stable Bovine Serum Albumin-Perovskite for Fluorescence Analysis of L-Ascorbic Acid and Alkaline Phosphatase

Halide lead perovskite has attracted increased attention due to its excellent optical properties. However, the poor stability of the halide lead perovskite nanocrystals has been a major obstacle to their application in biosensing. Here, we proposed a method to synthesize CsPbBr3/BSA NCs perovskite using bovine serum albumin (BSA) as a zwitterion ligand. Then, a fluorescent sensor for alkaline phosphatase determination based on CsPbBr3/BSA NCs was successfully built via the interaction of L-ascorbic acid (AA) with BSA on the perovskite surface. Under optimal conditions, the sensor showed a linear concentration range from 50 to 500 μM with a detection limit of 28 μM (signal-to-noise ratio of 3) for AA, and demonstrated a linear concentration range from 40 to 500 U/L with a detection limit of 15.5 U/L (signal-to-noise ratio of 3) for alkaline phosphatase (ALP). In addition, the proposed fluorescent biosensor exhibited good selectivity and recovery in the determination of ALP in human serum. This strategy offers an innovative way for enhancing the water stability of lead halide perovskite and promoting their application in biosensing areas.

Modulating Resonance Energy Transfer with Supramolecular Control in a Layered Hybrid Perovskite and Chromium Photosensitizer Assembly

Recently, the low-dimensional organic-inorganic halide perovskites (OIHP) have been exploited heavily for their favorable exciton dynamics, broad-band emission, remarkable stability, and tunable band-edge excited-state energy compared to their 3D counterparts for potential optoelectronic applications. Low-dimensional perovskites are generally good candidates for utilization as room-temperature photoluminescence (PL) materials. Further, doping divalent transition metals like Mn²⁺ into OIHP is expected to introduce a ⁴T₁-⁶A₁-based low-energy luminescence emission around 600 nm; an optical property that is favorable for biomedical optoelectronics. Doping Mn²⁺ in the perovskite lattice is also expected to induce the generation of cytotoxic singlet oxygen species (¹O₂), a ROS that is being exploited for various therapeutic applications. To integrate these optical and therapeutic properties of a 2D (PEA)₂PbBr₄ (Pb PeV; PEA = phenylethylammonium cation) perovskite alloyed with Mn²⁺ ions (Mn:PbPeV) and the option for a photoinduced energy transfer process involving a Cr(III)-based ¹O₂ generating photosensitizer (CrPS), we designed a unique purpose-built nanoassembly (Mn:PbPeV@PCD) using the encapsulation properties of a water-soluble polymer derived from β-cyclodextrin (PCD). Here the PCD is observed to modulate the classical internal energy transfer of Pb²⁺ exciton to alloyed Mn²⁺ orange emission, resulting in the emergence of a new blue emission. The addition of CrPS into the Mn:PbPeV@PCD to generate the CrPS@Mn:PbPeV@PCD assembly results in restoring perovskite luminescence followed by the external energy transfer to CrPS. We have elucidated the mechanism of these cascade energy transfer processes between multiple components using steady-state and time-resolved luminescence techniques. Efficient ROS generation and its potential to induce an oxidation reaction of a biomolecule are realized using guanine as the target molecule. Further photoinduced cleavage studies with biomolecules confirmed the efficacy of the nanoassembly in inducing the cleavage of guanine-rich DNA. The study opens up a new direction in the field of perovskite for biomedical applications.

Microencapsulation of Lead-Halide Perovskites in an Oil-in-Fluorine Emulsion for Cell Imaging

The superior optical properties of lead-halide perovskites (LHPs) inspired significant research in cell imaging applications; many encapsulating processes have improved perovskite stabilities with comparable biosafety. Herein, facile solvent evaporation encapsulation based on an oil-in-fluorine emulsion for aqueous-stable and extremely nontoxic LHP microcapsules is described. Perfluorooctane dispersed the emulsifier fluorocarbon surfactant to form a continuous fluorine phase, while LHPs and polymethylmethacrylate (PMMA) were dispersed in 1,2-dichloroethane, then emulsified in the fluorine phase to form an oil-in-fluorine emulsion. CsPbBr₃ microcapsules with a dense PMMA shell that protect fragile CsPbBr₃ from the external environment and inhibit lead ion release were obtained after solvent evaporation. The CsPbBr₃ microcapsules not only retained 91% of fluorescence intensity after exposure to water for 30 d but also possess extremely low cytotoxicity for MCF-7 cells. After exposure to 2 mg/mL of CsPbBr₃ microcapsules for 48 h, the cell viability remained >90%. The intracellular uptake of CsPbBr₃ microcapsules indicates its potential use in cell imaging.

Lead immobilization for environmentally sustainable perovskite solar cells

Lead halide perovskites are promising semiconducting materials for solar energy harvesting. However, the presence of heavy-metal lead ions is problematic when considering potential harmful leakage into the environment from broken cells and also from a public acceptance point of view. Moreover, strict legislation on the use of lead around the world has driven innovation in the development of strategies for recycling end-of-life products by means of environmentally friendly and cost-effective routes. Lead immobilization is a strategy to transform water-soluble lead ions into insoluble, nonbioavailable and nontransportable forms over large pH and temperature ranges and to suppress lead leakage if the devices are damaged. An ideal methodology should ensure sufficient lead-chelating capability without substantially influencing the device performance, production cost and recycling. Here we analyse chemical approaches to immobilize Pb2+ from perovskite solar cells, such as grain isolation, lead complexation, structure integration and adsorption of leaked lead, based on their feasibility to suppress lead leakage to a minimal level. We highlight the need for a standard lead-leakage test and related mathematical model to be established for the reliable evaluation of the potential environmental risk of perovskite optoelectronics.

Biomolecules incorporated in halide perovskite nanocrystals: synthesis, optical properties, and applications

Halide perovskite nanocrystals (HPNCs) have emerged at the forefront of nanomaterials research over the past two decades. The physicochemical and optoelectronic properties of these inorganic semiconductor nanoparticles can be modulated through the introduction of various ligands. The use of biomolecules as ligands has been demonstrated to improve the stability, luminescence, conductivity and biocompatibility of HPNCs. The rapid advancement of this field relies on a strong understanding of how the structure and properties of biomolecules influences their interactions with HPNCs, as well as their potential to extend applications of HPNCs towards biological applications. This review addresses the role of several classes of biomolecules (amino acids, proteins, carbohydrates, nucleotides, etc.) that have shown promise for improving the performance of HPNCs and their potential applications. Specifically, we have reviewed the recent advances on incorporating biomolecules with HP nanomaterials on the formation, physicochemical properties, and stability of HP compounds. We have also shed light on the potential for using HPs in biological and environmental applications by compiling some recent of proof-of-concept demonstrations. Overall, this review aims to guide the field towards incorporating biomolecules into the next-generation of high-performance HPNCs for biological and environmental applications.

The use and detection of quantum dots as nanotracers in environmental fate studies of engineered nanoparticles

Investigations of the behavior and effects of engineered nanoparticles (ENPs) on human health and the environment need detailed knowledge of their fate and transport in environmental compartments. Such studies are highly challenging due to low environmental concentrations, varying size distribution of the particles and the interference with the natural background. A strategy to overcome these limits is to use mimics of ENPs with unique detectable properties that match the properties of the ENPs as nanotracers. A special class of ENPs that can be tracked are quantum dots (QDs). QDs are composed of different metals, metalloids, or more recently also carbon (e.g., graphene), that result in unique optical properties. This allows the tracking of such particles by fluorescence microscopic and photometric techniques. Many types of QDs consist of heavy elements, allowing to track and visualize these particles also by electron microscopy and to quantitate the particles indirectly based on these elements. QDs can also be surface modified in various ways which enable them to be used as a label or as traceable mimics for ENPs. This review reflects a broad range of methods to synthesize and modify QDs based on metals, metalloids, and graphene for studying the environmental fate of nanoparticles and discusses and compares analytical methods that can be used for tracking and quantifying QDs. In addition, we review applications of QDs as ENP mimics in environmental studies of surface waters, soils, microorganisms, and plants with respect to the applied analytical techniques.

Highly Emitting Perovskite Nanocrystals with 2-Year Stability in Water through an Automated Polymer Encapsulation for Bioimaging

Lead-based halide perovskite nanocrystals are highly luminescent materials, but their sensitivity to humid environments and their biotoxicity are still important challenges to solve. Here, we develop a stepwise approach to encapsulate representative CsPbBr₃ nanocrystals into water-soluble polymer capsules. We show that our protocol can be extended to nanocrystals coated with different ligands, enabling an outstanding high photoluminescence quantum yield of ∼60% that is preserved over two years in capsules dispersed in water. We demonstrate that this on-bench strategy can be implemented on an automated platform with slight modifications, granting access to a faster and more reproducible fabrication process. Also, we reveal that the capsules can be exploited as photoluminescent probes for cell imaging at a dose as low as 0.3 μg_Pb/mL that is well below the toxicity threshold for Pb and Cs ions. Our approach contributes to expanding significantly the fields of applications of these luminescent materials including biology and biomedicine.

Halides and oxyhalides-based photocatalysts for abatement of organic water contaminants - An overview

Recently, halides (silver halides, AgX; perosvkite halides, ABX₃) and oxyhalides (bismuth oxyhalides, BiOX) based nanomaterials are noticeable photocatalysts in the degradation of organic water pollutants. Therefore, we review the recent reports to explore improvement strategies adopted in AgX, ABX₃ and BiOX (X = Cl, Br and I)-based photocatalysts in water pollution remediation. Herein, the photocatalytic degradation performances of each type of these photocatalysts were discussed. Strategies such as tailoring the morphology, crystallographic facet exposure, surface area, band structure, and creation of surface defects to improve photocatalytic activities of pure halides and BiOCl photocatalysts are emphasized. Other strategies like metal ion and/or non-metal doping and construction of composites, adopted in these photocatalysts were also reviewed. Furthermore, the way of production of active radicals by these photocatalysts under ultraviolet/visible light source is highlighted. The deciding factors such as structure of pollutant, light sources and other parameters on the photocatalytic performances of these materials were also explored. Based on this literature survey, the need of further research on AgX, ABX₃ and BiOX-based photocatalysts were suggested. This review might be beneficial for researchers who are working in halides and oxyhalides-based photocatalysis for water treatment.

Performance optimization strategies of halide perovskite-based mechanical energy harvesters

Halide perovskites, possessing unique electronic and photovoltaic properties, have been intensively investigated over the past decade. The excellent polarization, piezoelectricity, dielectricity and photoelectricity of halide perovskites provide new opportunities for the applications of mechanical energy harvesting. Although various studies have been conducted to develop halide perovskite-based triboelectric and piezoelectric nanogenerators, strategies for their electrical performance optimization are rarely mentioned. In this review, we systematically introduce the recent research progress of halide perovskite-based mechanical energy harvesters and summarize the different optimization strategies for improving both the piezoelectric and triboelectric output of the devices, bringing some inspiration to guide future material and structure design for halide perovskite-based energy devices. A summary of the current challenges and future perspectives is also presented, offering some possible directions for development in this emerging field.

Monitoring the Cd2+ release from Cd-containing quantum dots in simulated body fluids by size exclusion chromatography coupled with ICP-MS

Quantification of Cd²⁺ release from Cd-containing quantum dots (QDs) is of fundamental importance to elucidate its toxicity to organisms, but remains a great challenge due to the lack of appropriate analytical method. Herein, a facile method based on size exclusion chromatography (SEC) combined with inductively coupled plasma mass spectrometry (ICP-MS) was developed for separating and quantifying the QDs and counterpart ions. By using the mixture of sodium dodecyl sulfate (SDS) and ethylenediaminetetraacetic acid tetrasodium salt (EDTA) as the mobile phase, the defect of QD and ion adsorption onto the SEC column was overcome, thus realizing the accurate quantification of ionic species. Besides, the concentration of QDs was achieved through subtracting the ion concentration from the total concentration. Selecting CdSe@ZnS as the typical QDs, the Cd²⁺ release process in four typical simulated body fluids, namely, simulated gastric fluid, simulated sweat, Gamble's solution, and artificial lysosomal fluid, was monitored using the developed SEC-ICP-MS method. The media pH is identified as the decisive factor which controls the dissolution of ZnS shells and also the Cd²⁺ release kinetics and final concentration. Our results suggest that the oral pathway for QD uptake poses the biggest risk to human health.

Inserting protonated phenanthroline derivatives to interchain voids of anionic halometallate units to generate hybrid materials with tunable photochromic performance

Hybrid photochromic materials (HPMs) have potential application in many fields like display, protection, information storage. The generation of HPMs with tunable photochromic performance is meaningful for the availability of smart...