Injectable self-healing anti-inflammatory europium oxide-based dressing with high angiogenesis for improving wound healing and skin regeneration

Immunomodulatory All-Natural Kelp Decellularized Scaffold Prepared Using Deep Eutectic Solvent with Angiogenic Properties for Accelerating Diabetic Wound Healing

Excessive oxidative stress, chronic inflammation, and impaired vascularization are the main barriers to diabetic wound repair. A decellularized extracellular matrix (dECM) with a native ECM structure is a promising biomaterial candidate for diabetic wound healing. However, the traditional decellularization process (reagents) can diminish the structural stability, mechanical properties, and bioactive components of dECM. To address these issues, we developed an intrinsically bioactive kelp decellularized scaffold (Im-Gly2) using natural and gentle deep eutectic solvents (DES) for accelerating diabetic wound healing. Im-Gly2 had a stable porous 3D structure (80.7 μm) and suitable mechanical properties, which could support cell growth, proliferation, and migration. Due to the retention of fucoidan, polyphenols (735.3 μg/g), and flavonoids, Im-Gly2 demonstrated intrinsic antioxidant and immunomodulatory effects. It effectively reduced reactive oxygen species (ROS) production in RAW264.7 macrophages and promoted their differentiation into the M2 phenotype. Notably, Im-Gly2 promoted tube formation through paracrine mechanisms by inducing the expression of transforming and proliferative cytokines from the RAW264.7 macrophage. In vivo, Im-Gly2 accelerated the healing of diabetic wounds by alleviating inflammation, angiogenesis, granulation tissue formation, collagen deposition, and re-epithelialization. Taken together, our study provides a novel strategy for fabricating a bioactive kelp dECM without cross-linking with exogenous substances for accelerating chronic diabetic wound healing.

Sprayable Nanocomposites Hydrogel for Wound Healing and Skin Regeneration

Wound management remains a critical challenge worldwide and imposes a huge financial burden on every nation. Hydrogels are promising for biomedical applications because of their extracellular matrix (ECM) like structure, good biocompatibility and multifunctional bioactivity. However, the poor mechanical properties and inconvenient operation of traditional hydrogels make it difficult to meet the complex and multifaceted needs of clinical practice. In recent years, the multifunctional nanocomposites hydrogel with especially sprayable feature have shown enhanced mechanical properties and facile operation, which enable their huge clinical applications value. A unique and powerful nanocomposite hydrogels (NCH) platform is developed by combining the many advantages of nanomaterials and hydrogels, which can achieve efficient trauma repair. This work reviews important advances on the preparation, functions and applications of sprayable NCH platforms. The challenges and future trends in the field with the aim of providing researchers with clarity on the past, present, and future of the emerging field of sprayable NCH are also proposed in detail.

Recent advancements in bioadhesive self-healing hydrogels for effective chronic wound care

Chronic wounds are a critical and costly complication that affects millions of patients each year, especially patients suffering from diabetes, and constitute a serious global healthcare problem that needs immediate attention. In this direction, novel dressings that can integrate appropriate physicochemical and biological features, mechanical durability, and the capacity for therapy are of great clinical importance. For instance, self-healable hydrogels, with antibacterial activity and high tissue adhesion, have attracted increasing attention for wound management applications. Despite their potential, existing self-healable hydrogel networks exhibit limitations in mechanical strength and adhesion, tissue regeneration, antibacterial efficacy, and scalability, indicating a need for further improvement in the field. This review focuses on exactly these recent advances in the field with a special focus on self-healing adhesive hydrogel-based wound dressings as well as their structures, construction strategies, adhesion mechanisms, and emerging usage in the wound healing field. By shedding light on these developments, we aim to contribute to the ongoing pursuit of enhanced solutions for chronic wound care.

Europium-Doped 3D Dimensional Porous Calcium Phosphate Scaffolds as a Strategy for Facilitating the Comprehensive Regeneration of Bone Tissue: In Vitro and In Vivo

In response to the challenges faced by clinicians treating bone defects caused by various factors, various bone repair materials have been investigated, but the efficiency of bone healing still needs to be improved due to the acting of scaffolds only in a single stage of bone tissue regeneration. We investigated the potential of a novel 3D scaffold to support different stages of bone tissue regeneration, including initial inflammation, proliferation, and remodeling. Eu (0, 0.5, 2, 3.5, 5, and 6.5%) was added to calcium polyphosphate to obtain 3D porous network-doped Eu calcium polyphosphate (EuCPP) scaffolds with ideal mechanical strength and pore size. Both in vitro and in vivo experiments proved that Eu3+ released from 5% EuCPP scaffolds could significantly promote the migration and proliferation of bone marrow stromal cells which effectively promote angiogenesis; 5% EuCPP could significantly upregulate the ratio of OPG/RANKL in MC3T3-E1 and promote the secretion of osteogenic-related growth factors (ALP and OPN) from MC3T3-E1, indicating the potential of the scaffold to inhibit bone resorption and promote bone formation. In conclusion, 5% EuCPP possesses the biological properties of pro-angiogenesis, anti-inflammation, pro-osteogenesis, and inhibiting bone resorption, which may provide a sustained positive effect throughout the process of bone tissue repair.

Engineering Photo-Cross-Linkable MXene-Based Hydrogels: Durable Conductive Biomaterials for Electroactive Tissues and Interfaces

Light-cured conductive hydrogels have attracted immense interest in the regeneration of electroactive tissues and bioelectronic interfaces. Despite the unique properties of MXene (MX), its light-blocking effect in the range of 300-600 nm hinders the efficient cross-linking of photocurable hydrogels. In this study, we investigated the photo-cross-linking process of MX-gelatin methacrylate (GelMa) composites with different types of photoinitiators and MX concentrations to prepare biocompatible, injectable, conductive, and photocurable composite hydrogels. The examined photoinitiators were Eosin Y, Irgacure 2959 (Type I), and lithium phenyl-2,4,6-trimethylbenzoyl phosphinate (Type II). The light-blocking effect of MX strongly affected the thickness, pore structure, swelling ratio, degradation, and mechanical properties of the light-cured hydrogels. Uniform distribution of MX in the hydrogel matrix was achieved at concentrations up to 0.04 wt % but the film thickness and curing times varied depending on the type of photoinitiator. It was feasible to prepare thin films (0.5 mm) by employing Type I photoinitiators under a relatively long light irradiation (4-5 min) while thick films with centimeter sizes could be rapidly cured by using Type II photoinitiator (<60 s). The mechanical properties, including elastic modulus, toughness, and stress to break for the Type II hydrogels were significantly superior (up to 300%) to those of Type I hydrogels depending on the MX concentration. The swelling ratio was also remarkably higher (648-1274%). A conductivity of about 1 mS/cm was attained at 0.1 mg/mL MX for the composite hydrogel cured by the Type I photoinitiator. In vitro cytocompatibility assays determined that the hydrogels promoted cell viability, metabolic activity, and robust proliferation of C2C12 myoblasts, which indicated their potential to support muscle cell growth during myogenesis. The developed photocurable GelMa-MX hydrogels have the potential to serve as bioactive and conductive scaffolds to modulate cellular functions and for tissue-device interfacing.

Facile preparation of self-healing hydrogels based on chitosan and PVA with the incorporation of curcumin-loaded micelles for wound dressings

The increased demand for improved strategies for wound healing has, in recent years, motivated the development of multifunctional hydrogels with favorable bio-compatibility and antibacterial properties. To this regard, the current study presented the design of a novel self-healing composite hydrogel that could perform as wound dressing for the promotion of wound healing. The composite hydrogels were composed of polyvinyl alcohol (PVA), borax and chitosan functionalized with sialic acid (SA-CS) and curcumin loaded pluronic F127 micelles. The hydrogels were formed through the boronic ester bond formation between PVA, SA-CS and borax under physiological conditions and demonstrated adjustable mechanical properties, gelation kinetics and antibacterial properties. When incubating with NIH3T3 cells, the hydrogels also demonstrated good biocompatibility. These aspects offer a promising foundation for their prospective applications in developing clinical materials for wound healing.

Lanthanide complexes facilitate wound healing by promoting fibroblast viability, migration and M2 macrophage polarization

A tridentate ligand LH3 ((2-hydroxy-3-methoxybenzylidene)-2-(hydroxyimino)propanehydrazide) comprising o-vanillin, hydrazone and oxime donor groups has been employed to prepare a series of tetranuclear Ln(III) complexes. The reaction of ligand LH3 with Ln(NO3)3 [Ln = Sm, Eu, Gd, Tb, Dy, Ho, Er] in MeOH yielded Ln4(LH)6(MeOH)2 (Ln = Sm(1), Eu(2), Gd(3), Tb(4), Ho (6) and Er (7))] whereas the corresponding reaction with Dy(NO3)3 afforded Dy4(LH)4(LH2)2(OH)2 (5). All complexes were characterized by various analytical techniques including single crystal X-ray diffraction, IR spectroscopy, UV-Vis spectroscopy, and elemental analysis. To investigate the potential of these lanthanide complexes for wound healing applications, their effects on fibroblast viability, migration, and M2 macrophage polarization were evaluated. The cytotoxicity assessment revealed that complexes 2(Eu), 4(Tb), 5(Dy), and 7(Er) significantly enhanced fibroblast viability compared to the negative control (NC). In vitro wound healing assay demonstrated that complexes 2(Eu) and 7(Eu) substantially promoted fibroblast migration compared to the NC. Moreover, complex 2(Eu) exhibited significant anti-inflammatory effects by reducing the phagocytic ability of lipopolysaccharide (LPS)-stimulated macrophage cells and attenuating nitric oxide (NO) production. In conclusion, among the series of complexes tested, complex 2(Eu) displayed the most potent anti-inflammatory effect on macrophage cells, while simultaneously promoting fibroblast viability and migration. This unique combination of properties renders complex 2 (Eu) highly promising for wound healing applications.

A multifunctional hydrogel dressing with high tensile and adhesive strength for infected skin wound healing in joint regions

Most hydrogel dressings are designed for skin wounds in flat areas, and few are focused on the joint skin regions which undergo frequent movement. The mismatch of mechanical properties and poor fit between a hydrogel dressing and a wound in joint skin results in hydrogel shedding, bacterial infection and delayed healing. Therefore, it is of great significance to design and prepare a multifunctional hydrogel with high tensile and tissue-adhesive strength as well as other therapeutic effects for the treatment of joint skin wounds. In this work, a multifunctional hydrogel was reasonably prepared by simply mixing polyvinyl alcohol (PVA), borax, tannic acid (TA) and iron(III) chloride in certain proportions, which was further used to treat the skin wounds at the joint of the hind limb. Acting as the physical crosslinkers, borax and TA dynamically bond with PVA and provide the resulting hydrogel with strong tensile, fast shape-adaptive and self-healing properties. The photothermal bacteriostatic activity of the hydrogel is attributed to the formation of a metallic polyphenol network (MPN) between ferric ions and TA. In addition, the hydrogel exhibits high levels of adhesion, hemostatic performance, antioxidant abilities, and biocompatibility, and shows great potential to promote joint skin wound healing.

20(R)-ginsenoside Rg3-loaded polyurethane/marine polysaccharide based nanofiber dressings improved burn wound healing potentials

The management of deep burn injuries is extremely challenging, ascribed to their delayed wound healing rate, susceptibility for bacterial infections, pain, and increased risk of hypertrophic scarring. In our current investigation, a series of composite nanofiber dressings (NFDs) based on polyurethane (PU) and marine polysaccharides (i.e., hydroxypropyl trimethyl ammonium chloride chitosan, HACC and sodium alginate, SA) were accomplished by electrospinning and freeze-drying protocols. The 20(R)-ginsenoside Rg3 (Rg3) was further loaded into these NFDs to inhibit the formation of excessive wound scars. The PU/HACC/SA/Rg3 dressings showed a sandwich-like structure. The Rg3 was encapsulated in the middle layers of these NFDs and slowly released over 30 days. The PU/HACC/SA and PU/HACC/SA/Rg3 composite dressings demonstrated superior wound healing potentials over other NFDs. These dressings also displayed favorable cytocompatibility with keratinocytes and fibroblasts and could dramatically accelerate epidermal wound closure rate following 21 days of the treatment of a deep burn wound animal model. Interestingly, the PU/HACC/SA/Rg3 obviously reduced the excessive scar formation, with a collagen type I/III ratio closer to the normal skin. Overall, this study represented PU/HACC/SA/Rg3 as a promising multifunctional wound dressing, which promoted the regeneration of burn skins and attenuated scar formation.

Novel Metal Nanomaterials to Promote Angiogenesis in Tissue Regeneration

Angiogenesis-the formation of new blood vessels from existing blood vessels-has drawn significant attention in medical research. New techniques have been developed to control proangiogenic factors to obtain desired effects. Two important research areas are 1) understanding cellular mechanisms and signaling pathways involved in angiogenesis and 2) discovering new biomaterials and nanomaterials with proangiogenic effects. This paper reviews recent developments in controlling angiogenesis in the context of regenerative medicine and wound healing. We focus on novel proangiogenic materials that will advance the field of regenerative medicine. Specifically, we mainly focus on metal nanomaterials. We also discuss novel technologies developed to carry these proangiogenic inorganic molecules efficiently to target sites. We offer a comprehensive overview by combining existing knowledge regarding metal nanomaterials with novel developments that are still being refined to identify new nanomaterials.

Single-Component Self-Healing Antibacterial Anti-Inflammatory Intracellular-Antioxidative Poly(itaconic acid-pluronic) Hydrogel for Rapid Repair of MRSA-Impaired Wound

The rapid healing and repair of multidrug-resistant bacteria infected wound is still a challenge in the field of wound surgery. It is an effective strategy to develop multifunctional bioactive biomaterials with anti-infection therapy and promoting tissue regeneration. However, most of conventional multifunctional wound healing biomaterials possess the complicated composition and fabrication procedure, which may limit their clinical transformation. Herein, we report a single-component multifunctional bioactive self-healing scaffold (itaconic acid-pluronic-itaconic acid) (FIA) with robust antibacterial antioxidant anti-inflammatory bioactivity for treating methicillin-resistant Staphylococcus aureus (MRSA) impaired wound. FIA scaffolds exhibited the temperature-responsive sol-gel behavior, good injectability, and broad-spectrum antibacterial activity (100% inhibition rate against S. aureus, E. coli, and MRSA). FIA possessed favorable hemocompatibility and cell compatibility and even stimulated the cellular proliferation. FIA could efficiently scavenge the intracellular reactive oxygen species (ROS), decrease the inflammation factors expression, promote endotheliocyte migration and blood tube formation, and reduce the M1 phenotype of macrophages in vitro. FIA could significantly clear the MRSA infection, speed up the MRSA-infected wound healing and rapid formation of the normal epithelial layer and skin appendages. This work may provide a simple and efficient multifunctional bioactive biomaterial strategy for overcoming the challenge of the MRSA-impaired wound.

Multi-layer-structured bioactive glass nanopowder for multistage-stimulated hemostasis and wound repair

Current treatments for full-thickness skin injuries are still unsatisfactory due to the lack of hierarchically stimulated dressings that can integrate the rapid hemostasis, inflammation regulation, and skin tissue remodeling into the one system instead of single-stage boosting. In this work, a multilayer-structured bioactive glass nanopowder (BGN@PTE) is developed by coating the poly-tannic acid and ε-polylysine onto the BGN via facile layer-by-layer assembly as an integrative and multilevel dressing for the sequential management of wounds. In comparison to BGN and poly-tannic acid coated BGN, BGN@PTE exhibited the better hemostatic performance because of its multiple dependent approaches to induce the platelet adhesion/activation, red blood cells (RBCs) aggregation and fibrin network formation. Simultaneously, the bioactive ions from BGN facilitate the regulation of the inflammatory response while the poly-tannic acid and antibacterial ε-polylysine prevent the wound infection, promoting the wound healing during the inflammatory stage. In addition, BGN@PTE can serve as a reactive oxygen species scavenger, alleviate the oxidation stress in wound injury, induce the cell migration and angiogenesis, and promote the proliferation stage of wound repair. Therefore, BGN@PTE demonstrated the significantly higher wound repair capacity than the commercial bioglass dressing Dermlin™. This multifunctional BGN@PTE is a potentially valuable dressing for full-thickness wound management and may be expected to extend to the other wounds therapy.

3D-Printed Functional Hydrogel by DNA-Induced Biomineralization for Accelerated Diabetic Wound Healing

Chronic wounds in diabetic patients are challenging because their prolonged inflammation makes healing difficult, thus burdening patients, society, and health care systems. Customized dressing materials are needed to effectively treat such wounds that vary in shape and depth. The continuous development of 3D-printing technology along with artificial intelligence has increased the precision, versatility, and compatibility of various materials, thus providing the considerable potential to meet the abovementioned needs. Herein, functional 3D-printing inks comprising DNA from salmon sperm and DNA-induced biosilica inspired by marine sponges, are developed for the machine learning-based 3D-printing of wound dressings. The DNA and biomineralized silica are incorporated into hydrogel inks in a fast, facile manner. The 3D-printed wound dressing thus generates provided appropriate porosity, characterized by effective exudate and blood absorption at wound sites, and mechanical tunability indicated by good shape fidelity and printability during optimized 3D printing. Moreover, the DNA and biomineralized silica act as nanotherapeutics, enhancing the biological activity of the dressings in terms of reactive oxygen species scavenging, angiogenesis, and anti-inflammation activity, thereby accelerating acute and diabetic wound healing. These bioinspired 3D-printed hydrogels produce using a DNA-induced biomineralization strategy are an excellent functional platform for clinical applications in acute and chronic wound repair.

Microstructure, Physical and Biological Properties, and BSA Binding Investigation of Electrospun Nanofibers Made of Poly(AA-co-ACMO) Copolymer and Polyurethane

In this study, poly(AA-co-ACMO) and polyurethane-based nanofibers were prepared in a ratio of 1:1 (NF11) and 2:1 (NF21) as antimicrobial carriers for chronic wound management. Different techniques were used to characterize the nanofibers, and poly(AA-co-ACMO) was mostly found on the surface of PU. With an increase in poly(AA-co-ACMO) dose from 0 (PU) and 1:1 (NF11) to 2:1 (NF21) in the casting solution, the contact angle (CA) was reduced from 137 and 95 to 24, respectively, and hydrophilicity was significantly increased. As most medications inhibit biological processes by binding to a specific protein, in vitro protein binding was investigated mechanistically using a stopped-flow technique. Both NF11 and NF21 bind to BSA via two reversible steps: a fast second-order binding followed by a slow first-order one. The overall parameters for NF11 (K_a = 1.1 × 10⁴ M^-1, K_d = 89.0 × 10^-6, ΔG⁰ = -23.1 kJ mol^-1) and NF21 (K_a = 189.0 × 10⁴ M^-1, K_d = 5.3 × 10^-6 M, ΔG⁰ = -27.5 kJ mol^-1) were determined and showed that the affinity for BSA is approximately (NF11)/(NF21) = 1/180. This indicates that NF21 has much higher BSA affinity than NF11, although BSA interacts with NF11 much faster. NF21 with higher hydrophilicity showed effective antibacterial properties compared to NF11, in agreement with kinetic data. The study provided an approach to manage chronic wounds and treating protein-containing wastewater.

The biological functions of europium-containing biomaterials: A systematic review

The biological functions of rare-earth elements (REEs) have become a focus of intense research. Recent studies have demonstrated that ion doping or alloying of some REEs can optimize the properties of traditional biomaterials. Europium (Eu), which is an REE with low toxicity and good biocompatibility, has promising applications in biomedicine. This article systematically reviews the osteogenic, angiogenic, neuritogenic, antibacterial, and anti-tumor properties of Eu-containing biomaterials, thereby paving the way for biomedical applications of Eu. Data collection for this review was completed in October 2022, and 30 relevant articles were finally included. Most articles indicated that doping of Eu ions or Eu-compound nanoparticles in biomaterials can improve their osteogenic, angiogenic, neuritogenic, antibacterial, and anti-tumor properties. The angiogenic, antibacterial, and potential neuritogenic effects of Eu(OH)₃ nanoparticles have also been demonstrated.

Subaqueous free-standing 3D cell culture system for ultrafast cell compaction, mechano-inductive immune control, and improving therapeutic angiogenesis

Conventional 3D cell culture methods require a comprehensive complement in labor-intensive and time-consuming processes along with in vivo circumstantial mimicking. Here, we describe a subaqueous free-standing 3D cell culture (FS) device that can induce the omnidirectional environment and generate ultrafast human adipose-derived stem cells (hADSCs) that efficiently aggregate with compaction using acoustic pressure. The cell culture conditions were optimized using the FS device and identified the underlying molecular mechanisms. Unique phenomena in cell aggregation have led to extraordinary cellular behavior that can upregulate cell compaction, mechanosensitive immune control, and therapeutic angiogenesis. Therefore, we designated the resulting cell aggregates as "pressuroid." Notably, external acoustic stimulation produced by the FS device affected the pressuroids. Furthermore, the pressuroids exhibited upregulation in mechanosensitive genes and proteins, PIEZO1/2. CyclinD1 and PCNA, which are strongly associated with cell adhesion and proliferation, were elevated by PIEZO1/2. In addition, we found that pressuroids significantly increase angiogenic paracrine factor secretion, promote cell adhesion molecule expression, and enhance M2 immune modulation of Thp1 cells. Altogether, we have concluded that our pressuroid would suggest a more effective therapy method for future cell therapy than the conventional one.

Anti-oxidant anti-inflammatory and antibacterial tannin-crosslinked citrate-based mussel-inspired bioadhesives facilitate scarless wound healing

The revolutionary role of tissue adhesives in wound closure, tissue sealing, and bleeding control necessitates the development of multifunctional materials capable of effective and scarless healing. In contrast to the use of traditionally utilized toxic oxidative crosslinking initiators (exemplified by sodium periodate and silver nitrate), herein, the natural polyphenolic compound tannic acid (TA) was used to achieve near instantaneous (<25s), hydrogen bond mediated gelation of citrate-based mussel-inspired bioadhesives combining anti-oxidant, anti-inflammatory, and antimicrobial activities (3A-TCMBAs). The resulting materials were self-healing and possessed low swelling ratios (<60%) as well as considerable mechanical strength (up to ∼1.0 MPa), elasticity (elongation ∼2700%), and adhesion (up to 40 kPa). The 3A-TCMBAs showed strong in vitro and in vivo anti-oxidant ability, favorable cytocompatibility and cell migration, as well as photothermal antimicrobial activity against both Staphylococcus aureus and Escherichia coli (>90% bacterial death upon near-infrared (NIR) irradiation). In vivo evaluation in both an infected full-thickness skin wound model and a rat skin incision model demonstrated that 3A-TCMBAs + NIR treatment could promote wound closure and collagen deposition and improve the collagen I/III ratio on wound sites while simultaneously inhibiting the expression of pro-inflammatory cytokines. Further, phased angiogenesis was observed via promotion in the early wound closure phases followed by inhibition and triggering of degradation & remodeling of the extracellular matrix (ECM) in the late stage (supported by phased CD31 (platelet endothelial cell adhesion molecule-1) PDGF (platelet-derived growth factor) and VEGF (vascular endothelial growth factor) expression as well as elevated matrix metalloprotein-9 (MMP-9) expression on day 21), resulting in scarless wound healing. The significant convergence of material and bioactive properties elucidated above warrant further exploration of 3A-TCMBAs as a significant, new class of bioadhesive.

•

Citrate-based mussel-inspired bioadhesive prepolymers were crosslinked with tannic acid via hydrogen bonding (3A-TCMBAs).

•

3A-TCMBAs showed good tissue adhesiveness, self-healing and elastic properties.

•

3A-TCMBAs exhibited photothermal antibacterial, antioxidant and anti-inflammatory efficiency.

•

3A-TCMBAs could promote scarless wound healing by enabling phased angiogenesis.

Engineering functional natural polymer-based nanocomposite hydrogels for wound healing

Skin injury occurs due to acute trauma, chronic trauma, infection, and surgical intervention, which can result in severe dysfunction and even death in humans. Therefore, clinical intervention is critical for the treatment of skin wounds. One idealized method is to use wound dressings to protect skin wounds and promote wound healing. Among these wound dressings, nanocomposite natural polymer hydrogels (NNPHs) are multifunctional wound dressings for wound healing. The combination of nanomaterials and natural polymer hydrogels avoids the shortcomings of a single component. Moreover, nanomaterials could provide improved antibacterial, anti-inflammatory, antioxidant, stimuli-responsive, electrically conductive and mechanical properties of hydrogels to accelerate wound healing. This review focuses on recent advancements in NNPHs for skin wound healing and repair. Initially, the functions and requirements of NNPHs as wound dressings were introduced. Second, the design, preparation and capacities of representative NNPHs are classified based on their nanomaterial. Third, skin wound repair applications of NNPHs have been summarized based on the types of wounds. Finally, the potential issues of NNPHs are discussed, and future research is proposed to prepare idealized multifunctional NNPHs for skin tissue regeneration.

Role of quercetin and rutin in enhancing the therapeutic potential of mesenchymal stem cells for cold induced burn wound

INTRODUCTION

Cold burn wounds differ in their pathophysiological spectrum as compared to other types of burn wounds. These wounds have prolonged devastating effects on the body including hypertrophic scars, contracture, and necrosis. Mesenchymal stem cells (MSCs) are considered promising candidates for the complete regeneration of burn wounds. However, transplanted MSCs face the challenge to survive under the harsh tissue conditions. Preconditioning of MSCs with bioactive compounds may enhance their survival and regenerative potential for use in clinical applications. Bioactive compounds of Melia azedarach are well known for their potential role in treating different types of skin wounds due to their anti-inflammatory, anti-viral, anti-cytotoxic, and anti-oxidative properties. This study aims to evaluate the synergistic effects of human umbilical cord derived MSCs (hUC-MSCs) after preconditioning them with bioactive compounds of M. azedarach (quercetin and rutin) for cold induced burn wounds.

METHOD

Human umbilical cord MSCs (hUC-MSCs) were characterized based on their specific cell surface markers and treated with 20 μM of quercetin or rutin. In vitro scratch assay was performed to measure cell migration and wound closure. In vivo cold burn wound model was developed via direct exposure of the dorsal rat skin to liquid nitrogen. hUC-MSCs were subcutaneously transplanted next day of burn wound induction and wound was examined at different time points corresponding to the wound healing phases (days 3, 7, and 14). The regenerative potential of preconditioned hUC-MSCs was assessed in different groups; control (treated only with hUC-MSCs), and treated groups (quercetin or rutin treated hUC-MSCs). Healing potential and wound closure were evaluated by histological, gene expression, and immunohistochemical analyses of the wound tissues before and after treatment.

RESULTS

Scratch assay exhibited enhanced cell migration towards wound closure in the treated groups as compared to the control. Macroscopic examination of the wound revealed scab formation at day 14 in control, whereas scab was detached and the wound tissue was remarkably remodeled in the treated groups. Comparison between the treated groups showed that burn wound treated with quercetin significantly increased healing potential than the rutin treated MSCs. Histological findings showed enhanced regeneration of skin layers along with hair follicles in the quercetin group, while increased neovascularization was noted in both treatment groups. Gene profile of wound healing mediators illustrated significant upregulation of IL-5, IL-4, GPX-7, TXNRD-2, PRDX, VEGF, and FGF and downregulation of inflammatory cytokines IL-1β and IL-6.

CONCLUSION

In conclusion, synergistic effect of hUC-MSCs and bioactive compounds of M. azedarach enhances wound healing by reducing the inflammation, mitigating oxidative stress and enhancing neovascularization. The study findings will aid in designing more effective treatment options for cold burn wounds.

Multiple Coordination-Derived Bioactive Hydrogel with Proangiogenic Hemostatic Capacity for Wound Repair

Bioactive hydrogels with multifunctional properties have shown promising potential in promoting wound repair and skin tissue regeneration. The regulation on different stages of skin wound healing (hemostasis and inflammation) is important for wound repair. Herein, a multiple coordination-derived bioactive hydrogel (SGPA) with anti-inflammatory proangiogenic hemostatic capacity for wound repair is reported. The SGPA is prepared through a facile multiple metal coordination action based on the sodium alginate, metal ions (Gd3+ ), and bisphosphate functionalized polycitrate. The SGPA exhibits a large porous structure, good injectability, and self-healing performance, as well as controlled biodegradation. Furthermore, the SGPA has good cytocompatibility and hemocompatibility, and can further promote the migration of endothelial cells. The SGPA hydrogel presents good hemostasis capacity in a liver hemorrhage model in vivo. The full-thickness cutaneous wound model demonstrates that the SGPA hydrogel can effectively accelerate the wound repair through down-regulating the inflammatory factors and stimulating the angiogenesis around the wound beds. This work suggests that the multiple metal-organic coordination may be a good strategy to construct the multifunctional bioactive hydrogel for wound repair.

Leveraging the advancements in functional biomaterials and scaffold fabrication technologies for chronic wound healing applications

Exploring new avenues for clinical management of chronic wounds holds the key to eliminating socioeconomic burdens and health-related concerns associated with this silent killer. Engineered biomaterials offer great promise for repair and regeneration of chronic wounds because of their ability to deliver therapeutics, protect the wound environment, and support the skin matrices to facilitate tissue growth. This mini review presents recent advances in biomaterial functionalities for enhancing wound healing and demonstrates a move from sub-optimal methods to multi-functionalized treatment approaches. In this context, we discuss the recently reported biomaterial characteristics such as bioadhesiveness, antimicrobial properties, proangiogenic attributes, and anti-inflammatory properties that promote chronic wound healing. In addition, we highlight the necessary mechanical and mass transport properties of such biomaterials. Then, we discuss the characteristic properties of various biomaterial templates, including hydrogels, cryogels, nanomaterials, and biomolecule-functionalized materials. These biomaterials can be microfabricated into various structures, including smart patches, microneedles, electrospun scaffolds, and 3D-bioprinted structures, to advance the field of biomaterial scaffolds for effective wound healing. Finally, we provide an outlook on the future while emphasizing the need for their detailed functional behaviour and inflammatory response studies in a complex in vivo environment for superior clinical outcomes and reduced regulatory hurdles.

Investigation of the In Vivo, In Vitro, and In Silico Wound Healing Potential of Pinctada martensii Purified Peptides

Previous studies found that both oral and topical administration of enzymatic digestion products < 3 K Da ultrafiltration fractions of Pinctada martensii mantle (PMPs) had pro-healing effects. Thus, we further purified them by Sephadex-G25 and screened them by cellular assays to obtain Pinctada martensii purified peptides (PMPPs). In this study, we explored the mechanism of PMPPs on wound healing by in vivo, in vitro, and in silico experiments. LC-MS/MS results showed that PMPPs consisted of 33 peptides with molecular weights ranging from 758.43 to 2014.04 Da, and the characteristic peptide was Leu-Asp. The results of cellular assays showed that PMPPs promoted the proliferation of human skin fibroblasts (HSF) (135%) and human immortalized keratinocyte (HaCaT) cells (125%) very significantly at 12.5 μg/mL. The in vivo results showed that PMPPs could achieve scarless healing by inhibiting the inflammatory response, accelerating the epithelialization process, and regulating collagen I/III ratio. The optimal peptide sequence FAFQAEIAQLMS of PMPPs was screened for key protein receptors in wound healing (EGFR1, FGFR1, and MMP-1) with the help of molecular docking technique, which also showed to be the key pro-healing active peptide sequence. Therefore, it may provide a therapeutic strategy with great potential for wound healing.

Co-Loading of Inorganic Nanoparticles and Natural Oil in the Electrospun Janus Nanofibers for a Synergetic Antibacterial Effect

Side-by-side electrospinning is a powerful but challenging technology that can be used to prepare Janus nanofibers for various applications. In this work, cellulose acetate (CA) and polycaprolactone (PCL) were used as polymer carriers for silver nanoparticles (Ag NPs) and lavender oil (LO), respectively, processing these into two-compartment Janus fibers. A bespoke spinneret was used to facilitate the process and prevent the separation of the working fluids. The process of side-by-side electrospinning was recorded with a digital camera, and the morphology and internal structure of the products were characterized by electron microscopy. Clear two-compartment fibers are seen. X-ray diffraction patterns demonstrate silver nanoparticles have been successfully loaded on the CA side, and infrared spectroscopy indicates LO is dispersed on the PCL side. Wetting ability and antibacterial properties of the fibers suggested that PCL-LO//CA-Ag NPs formulation had strong antibacterial activity, performing better than fibers containing only one active component. The PCL-LO//CA-Ag NPs had a 20.08 ± 0.63 mm inhibition zone for E. coli and 19.75 ± 0.96 mm for S. aureus. All the fibers had water contact angels all around 120°, and hence, have suitable hydrophobicity to prevent water ingress into a wound site. Overall, the materials prepared in this work have considerable promise for wound healing applications.

Hyaluronic acid-based glucose-responsive antioxidant hydrogel platform for enhanced diabetic wound repair

Hyaluronic acid (HA)-based antioxidant hydrogels have achieved remarkable results in diabetic wound repair. However, the realization of their glucose-responsive antioxidant functions remains a significant challenge. In this study, we modified hyaluronic acid methacrylate (HAMA) with phenylboronic acid (PBA) and developed a glucose-responsive HA derivative (HAMA-PBA). A glucose-responsive HAMA-PBA/catechin (HMPC) hydrogel platform was then fabricated by forming a borate ester bond between HAMA-PBA and catechin. The results showed that the HMPC hybrid hydrogel not only had a three-dimensional network structure and Young's modulus similar to those of skin tissue, but also possessed biocompatibility. The HMPC hydrogel also showed unique glucose-responsive catechin release behavior and remarkable antioxidant capability, which could effectively eliminate intracellular reactive oxygen species and protect cells from oxidative stress damage (increased superoxide dismutase activity, stabilized reduced glutathione/oxidized glutathione ratio, and reduced malondialdehyde content). Additionally, in vitro and in vivo experimental results showed that the HMPC hydrogel effectively promoted angiogenesis (enhanced VEGF and CD31 expression) and reduced inflammatory responses (decreased IL-6 level and increased IL-10 level), thus rapidly repairing diabetic wounds (within three weeks). This was a significant improvement as compared to that observed for the untreated control group and the HMP hydrogel group. These results indicated the potential for the application of the HMPC hydrogel for treating diabetic wounds. STATEMENT OF SIGNIFICANCE: At present, the delayed closure rate of diabetic chronic wounds caused by excessive reactive oxygen species (ROS) remains a worldwide challenge. Hyaluronic acid (HA)-based antioxidant hydrogels have made remarkable achievements in diabetic wound repair; however, the realization of their glucose-responsive antioxidant functions is a tough challenge. In this work, we developed a novel HA-based hydrogel platform with glucose-responsive antioxidant activity for rapid repair of diabetic wounds. In vitro and in vivo experimental results showed that the HMPC hydrogel could effectively promote angiogenesis (enhanced VEGF and CD31 expression) and reduce inflammatory response (decreased IL-6 level and increased IL-10 level), thus rapidly repairing diabetic wounds (within 3 weeks). These results indicated the potential of the HMPC hydrogel for application in diabetic wound treatment.

Biomaterials-Based Regenerative Strategies for Skin Tissue Wound Healing

Skin tissue wound healing proceeds through four major stages, including hematoma formation, inflammation, and neo-tissue formation, and culminates with tissue remodeling. These four steps significantly overlap with each other and are aided by various factors such as cells, cytokines (both anti- and pro-inflammatory), and growth factors that aid in the neo-tissue formation. In all these stages, advanced biomaterials provide several functional advantages, such as removing wound exudates, providing cover, transporting oxygen to the wound site, and preventing infection from microbes. In addition, advanced biomaterials serve as vehicles to carry proteins/drug molecules/growth factors and/or antimicrobial agents to the target wound site. In this review, we report recent advancements in biomaterials-based regenerative strategies that augment the skin tissue wound healing process. In conjunction with other medical sciences, designing nanoengineered biomaterials is gaining significant attention for providing numerous functionalities to trigger wound repair. In this regard, we highlight the advent of nanomaterial-based constructs for wound healing, especially those that are being evaluated in clinical settings. Herein, we also emphasize the competence and versatility of the three-dimensional (3D) bioprinting technique for advanced wound management. Finally, we discuss the challenges and clinical perspective of various biomaterial-based wound dressings, along with prospective future directions. With regenerative strategies that utilize a cocktail of cell sources, antimicrobial agents, drugs, and/or growth factors, it is expected that significant patient-specific strategies will be developed in the near future, resulting in complete wound healing with no scar tissue formation.

Novel Glucose-Responsive Antioxidant Hybrid Hydrogel for Enhanced Diabetic Wound Repair

Antioxidant hydrogel has exhibited great potential for diabetic wound treatment. However, it is still a difficult challenge to realize reactive oxygen species (ROS) scavenging in an intelligent manner. Herein, we designed a novel glucose-responsive antioxidant hybrid hydrogel for enhanced diabetic wound repair. In this study, phenylboronic acid (PBA) with unique glucose-sensitivity was modified onto a hyaluronic acid (HA) chain by one-step synthesis, which was then incorporated into a polyethylene glycol diacrylates (PEG-DA) hydrogel matrix to obtain a novel hybrid hydrogel (PEG-DA/HA-PBA). Then, myricetin (MY) molecules with strong antioxidant activity were immobilized into the hybrid hydrogel by the formation of a dynamic borate bond between the polyphenol group of MY and the phenylboronic acid group of HA-PBA. The PEG-DA/HA-PBA/MY (PHM) hybrid hydrogel achieved glucose-triggered MY release, efficient ROS-scavenging (>80.0%), and also reshaped the hostile oxidative wound microenvironment (reduced MDA activity and increased SOD and GSH/GSSG levels). Furthermore, in vitro and in vivo results indicated that the PHM hydrogel platform effectively ameliorated the inflammatory response (decreased IL-6 and increased Il-10 expression), accelerated angiogenesis (increased VEGF and CD 31 expression), and increased tissue remodeling within 20 days, which was better than the nonresponsive PEG-DA/MY (PM) hydrogel platform in promoting diabetic wound healing. All results strongly suggested that this novel glucose-responsive antioxidant hybrid hydrogel platform has great potential in diabetic wound repair.

Characterization and diabetic wound healing benefits of protein-polysaccharide complexes isolated from an animal ethno-medicine Periplaneta americana L

Periplaneta americana L. (PA), a type of animal medicine, has been widely used for wound healing in clinical settings. In order to further investigate the bioactive wound healing substances in PA, crude PA protein-polysaccharide complexes were further purified by cellulose DE-52 and Sephadex G100 chromatography in succession. Among these isolated fractions, two fractions eluted by 0.3 M and 0.5 M NaCl with the higher yield, respectively named PaPPc2 and PaPPc3 respectively, were chosen for the wound healing experiments. Mediated by HPGPC, amino acid and monosaccharide composition analysis, circular dichroism spectrum, glycosylation type, FT-IR, and ¹H NMR analysis, the characterization of PaPPc2 and PaPPc3 was implemented. And then, the benefits of PaPPcs to promote cell proliferation, migration, and tube formation of HUVECs were determined in vitro, indicated these fractions would facilitate angiogenesis. Finally, as proof of concept, PaPPc2 and PaPPc3 were employed to accelerate the acute wounds of diabetic mice, involving in increase blood vessels and the amounts of angiogenesis-related cytokines (α-SMA, VEGF, and CD31). In short, this study provides an experimental basis to demonstrate the protein-polysaccharide complexes of Periplaneta americana L. as its wound healing bioactive substances.

Tannin-Bridged Magnetic Responsive Multifunctional Hydrogel for Enhanced Wound Healing by Mechanical Stimulation Induced Early Vascularization

Wound healing is a complex process. Wound repair material requires multiple functionalities, such as anti-inflammatory, antibacterial, angiogenesis, pro-proliferation, and remodeling. To achieve rapid tissue regeneration, magnetic field-assisted therapy has become...

Microstructure and Biological Properties of Electrospun In Situ Polymerization of Polycaprolactone-Graft-Polyacrylic Acid Nanofibers and Its Composite Nanofiber Dressings

In this study, polycaprolactone (PCL)- and poly(acrylic acid) (PAA)-based electrospun nanofibers were prepared for the carriers of antimicrobials and designed composite nanofiber mats for chronic wound care. The PCL- and PAA-based electrospun nanofibers were prepared through in situ polymerization starting from PCL and acrylic acid (AA). Different amounts of AA were introduced to improve the hydrophilicity of the PCL electrospun nanofibers. A compatibilizer and a photoinitiator were then added to the electrospinning solution to form a grafted structure composed of PCL and PAA (PCL-g-PAA). The grafted PAA was mainly located on the surface of a PCL nanofiber. The optimization of the composition of PCL, AA, compatibilizer, and photoinitiator was studied, and the PCL-g-PAA electrospun nanofibers were characterized through scanning electron microscopy and 1H-NMR spectroscopy. Results showed that the addition of AA to PCL improved the hydrophilicity of the electrospun PCL nanofibers, and a PCL/AA ratio of 80/20 presented the best composition and had smooth nanofiber morphology. Moreover, poly[2 -(tert-butylaminoethyl) methacrylate]-grafted graphene oxide nanosheets (GO-g-PTA) functioned as an antimicrobial agent and was used as filler for PCL-g-PAA nanofibers in the preparation of composite nanofiber mats, which exerted synergistic effects promoted by the antibacterial properties of GO-g-PTA and the hydrophilicity of PCL-g-PAA electrospun nanofibers. Thus, the composite nanofiber mats had antibacterial properties and absorbed body fluids in the wound healing process, thereby promoting cell proliferation. The biodegradation of the PCL-g-PAA electrospun nanofibers also demonstrated an encouraging result of three-fold weight reduction compared to the neat PCL nanofiber. Our findings may serve as guidelines for the fabrication of electrospun nanofiber composites that can be used mats for chronic wound care.

Biocompatible, antibacterial and anti-inflammatory zinc ion cross-linked quaternized cellulose‑sodium alginate composite sponges for accelerated wound healing

Bacterial infection has become one of the most challenges for wound healing, which causes serious inflammatory response and delays the healing process. Herein, a novel sponge with excellent biocompatible, antibacterial and anti-inflammatory properties based on quaternized cellulose (QC), sodium alginate (SA) and Zn²⁺ was reported. The existence of physical interactions, such as electrostatic interaction, chelation and hydrogen bonding endowed the sponges with enhanced mechanical property. The composite sponges exhibited outstanding biocompatibility and hemostatic efficiency due to the compatible nature of the component and physical cross-linking, as well as superior antibacterial property benefited from the synergistic effects of steady Zn²⁺ release and quaternary ammonium group. In vivo investigation validated that the enhanced antibacterial and anti-inflammatory effect of the sponges, which significantly promoted wound closure and the reconstruction of skin tissue through epithelial regeneration, collagen deposition and mitigating inflammatory cell infiltration. Overall, the novel sponge demonstrated great potentials in bacteria-associated wound management.

Conductive, Self-Healing, Adhesive, and Antibacterial Hydrogels Based on Lignin/Cellulose for Rapid MRSA-Infected Wound Repairing

The abuse of antibiotics induces the emergence of drug-resistant bacteria, which greatly increases the difficulty of clinical treatment of infected wounds. It is urgent to design a multifunctional wound dressing independent of antibiotics. In this work, we designed multifunctional hydrogels based on lignin and cellulose in natural polymers. Lignin with antioxidant properties could reduce silver nanoparticles in situ and could also be used as a crosslinking agent to construct hydrogels between hydroxypropyl cellulose modified with phenylboric acid by a dynamic borate bond. Hydrogels have excellent properties such as self-healing, shape adaptability, biocompatibility, blood compatibility, antioxidant properties, excellent broad-spectrum antimicrobial properties, good tissue adhesion, and electrical conductivity. The tissue adhesion of hydrogels endows them with an excellent hemostasis property in a rat liver injury model. In vivo experiments demonstrated that hydrogels can maintain a moist healing environment, reduce inflammatory cell infiltration, promote M2 macrophage polarization, accelerate collagen deposition, promote the regeneration of new blood vessels, and significantly speed up the wound healing of methicillin-resistant Staphylococcus aureus (MRSA)-infected wounds. Therefore, these multifunctional hydrogels are an excellent candidate to treat multiple stages of wound healing and have a broad application prospect in the medical field.

Facile Polyphenol-Europium Assembly Enabled Functional Poly(l-Lactic Acid) Nanofiber Mats with Enhanced Antioxidation and Angiogenesis for Accelerated Wound Healing

Burns, trauma, surgery and chronic diabetic ulcers are the most common reasons causing skin wounds in clinic. Thus, developing a functional wound dressing has been an imperative issue. Herein, functional wound dressing (poly(l-lactic acid) PLLA-((tanic acid (TA)/europium (Eu))_n ) is fabricated through a facile polyphenol-europium ion assembly to ameliorate wound microenvironment via scavenging excessive reactive oxygen species (ROS) and promoting angiogenesis. The physicochemical characterization indicates that the multicycle assembled TA/Eu is uniformly deposited on PLLA-(TA/Eu)_n nanofiber mats surface. In vitro 2,2-diphenyl-1-picrylhydrazyl (DPPH) antioxidant tests display good antioxidant ability by scavenging more than 75% ROS, and significantly increasing the antioxidant enzyme levels in vivo. Cytocompatibility experiments illustrate that PLLA-(TA/Eu)_n nanofiber mats can promote the adhesion and proliferation of human umbilical vein endothelial cells (HUVECs) and L929 cells. Meanwhile, real-time quantitative polymerase chain reaction (PCR) (RT-qPCR) and western blot assays illustrate that it can stimulate proangiogenesis by elevating the expression of angiogenesis-related genes and proteins. In vivo Sprague-Dawley (SD) rats experiments indicate that PLLA-(TA/Eu)_n nanofiber mats can significantly promote wound healing by improving both angiogenesis and antioxidant activity. Taken together, the functional PLLA-(TA/Eu)_n nanofiber mats can offer significant promise as wound dressing for accelerated wound healing.

Injectable self-healing bioactive antioxidative one-component poly(salicylic acid) hydrogel with strong ultraviolet-shielding for preventing skin light injury

The design and development of one-component temperature-sensitive bioactive hydrogel with multifunctional properties for protecting skin against light injury remain a challenge. Herein, we report a bioactive multifunctional poly(salicylic acid)-F127-poly(salicylic acid) copolymer hydrogel (FPSa) with one-component for potential skin protection applications. The FPSa hydrogel possesses the thermosensitivity (23 °C), injectability, self-healing ability, ultraviolet shielding (shielding the wavelength between 280 and 370 nm), and antioxidation activity (above 70%), and also showed the good cytocompatibility (cell survival rate >90% and hemolysis rate less than 5%) and biodegradability (90% weight loss at 3 days). The in vivo animal model showed that FPSa hydrogel could effectively protect the skin tissue and prevent the ultraviolet induced injury. This study can provide a strategy to design multifunctional bioactive hydrogel with simple composition for disease therapy and regenerative medicine.

Development and characterization of gel-in-water nanoemulsion as a novel drug delivery system

The effective delivery of anti-cancer drugs with minimal side effects and better therapeutic efficacy has remained an active area of research for many decades. Organogels have gained attention in recent years as potential drug delivery systems due to their high bioavailability, no first-pass metabolism and rapid action. Considering this, in the current study an organogel based nanoemulsion was developed aiming to effectively deliver hydrophobic drugs via encapsulation within in situ gellable organogel droplets, termed as gel-in-water (G/W) nanoemulsion. G/W nanoemulsion was prepared using a combination of lipiodol and organogelator 12-hydroxystearic acid (12-HSA) as inner gel phase; dispersed in water by ultrasonication and stabilized with polyoxyethylene hydrogenated castor oil (HCO-60) as a surfactant. The prepared nanoemulsion showed high drug loading efficiency (≈97%) with a mean diameter of 206 nm. Lower polydispersity index (PdI) value (≈0.1) suggests monodispersed nature of G/W nanoemulsion in the continuous phase. G/W nanoemulsion was found stable over six months in terms of particle size, zeta potential and pH at different storage temperatures. There was no cytotoxic effect of prepared G/W nanoemulsion on primary hepatocytes in vitro. In contrast, paclitaxel-loaded G/W showed a significant decrease in melanoma cell growth (*p < 0.05) both in vitro and in vivo. Our results support the hypothesis that organogel based nanoemulsions can be a promising drug delivery system.