Comparison of semipermeable membrane device (SPMD) and large-volume solid-phase extraction techniques to measure water concentrations of 4,4'-DDT, 4,4'-DDE, and 4,4'-DDD in Lake Chelan, Washington

Investigation of organic micropollutant pollution in İzmit Bay: a comparative study of passive sampling and instantaneous sampling techniques

In this study, we used a comprehensive array of sampling techniques to examine the pollution caused by organic micropollutants in İzmit Bay for the first time. Our methodology contains spot seawater sampling, semi-permeable membrane devices (SPMDs) passive samplers for time-weighted average (TWA), and sediment sampling for long-term pollution detection in İzmit Bay, together. Additionally, the analysis results obtained with these three sampling methods were compared in this study. Over the course of two seasons in 2020 and 2021, we deployed SPMDs for 21 days in the first season and for 30 days in the second season. This innovative approach allowed us to gather sea water samples and analyze them for the presence of polycyclic aromatic hydrocarbons (Σ15 PAHs), polychlorinated biphenyls (Σ7 PCBs), and organochlorine pesticides (Σ11 OCPs). Using SPMD-based passive sampling, we measured micropollutant concentrations: PAHs ranged from 1963 to 10342 pg/L in 2020 and 1338 to 6373 pg/L in 2021; PCBs from 17.46 to 61.90 pg/L in 2020 and 8.37 to 78.10 pg/L in 2021; and OCPs from 269.2 to 8868 pg/L in 2020 and 141.7 to 1662 pg/L in 2021. Our findings revealed parallels between the concentrations of PAHs, PCBs, and OCPs in both SPMDs and sediment samples, providing insights into the distribution patterns of these pollutants in the marine ecosystem. However, it is worth noting that due to limited data acquisition, the suitability of spot sampling in comparison to instantaneous sampling remains inconclusive, highlighting the need for further investigation and data collection.

Consideration of unmeasured micropollutants released from WWTP for potential impact estimations

During wastewater treatment, micropollutants are only partly eliminated and may present a risk for human health and aquatic ecosystems. The potential impacts these substances may have are currently underestimated due to the lack in available concentrations that lie below the limit of quantification (LOQ) for an important set of micropollutants. Here, the potential impacts due to 261 organic micropollutants on human health and aquatic environments were investigated at the scale of France. Even with concentrations below the LOQ, certain micropollutants were found to have a significant potential impact. For unmeasured concentrations, a global concentration distribution built from several datasets with different LOQ was used. By disregarding the unmeasured micropollutants, the potential impacts have been underestimated by >300 % on both human health and aquatic environments. Certain substances, such as hydrazine, endrin, or 2,3,7,8-TetraCDD, could lead to very strong potential impacts, even with unmeasured concentration levels. Moreover, the usual convention of LOQ/2 to replace unmeasured concentrations also appeared to overestimate the potential impact. The present work can be adapted to any other compartment or geographical context.

Evaluating pesticide mixture risks in French Mediterranean coastal lagoons waters

To assess the risk of pesticide mixtures in lagoon waters, this study adopted a multi-step approach using integrative passive samplers (POCIS) and concentration addition (CA) toxicological models. Two French Mediterranean lagoons (Thau and Or) were monitored for a range of 68 pesticides continuously over a period of a year (2015-16). The findings revealed mixtures of dissolved pesticides with varying composition and levels over the year. The Or site contained more pesticides than Thau site (37 vs 28 different substances), at higher concentrations (0.1-58.6 ng.L^-1 at Or vs <0.1-9.9 at Thau) and with overall higher detection frequencies. All samples showed a potential chronic toxicity risk, depending on the composition and concentrations of co-occurring pesticides. In 74 % of the samples, this pesticide risk was driven by a few single substances (ametryn, atrazine, azoxystrobin, carbendazim, chlorotoluron, irgarol, diuron and metolachlor) and certain transformation products (e.g. DPMU and metolachlor OA/ESA). Individually, these were a threat for the three taxa studied (phytoplankton, crustaceans and fish). Yet even a drastic reduction of these drivers alone (up to 5 % of their current concentration) would not eliminate the toxicity risks in 56 % of the Or Lagoon samples, due to pesticide mixtures. The two CA-based approaches used to assess the combined effect of these mixtures, determined chronic potential negative impacts for both lagoons, while no acute risk was highlighted. This risk was seasonal, indicating the importance of monitoring in key periods (summer, winter and spring) to get a more realistic picture of the pesticide threat in lagoon waters. These findings suggest that it is crucial to review the current EU Water Framework Directive's risk-assessment method, as it may incorrectly determine pesticide risk in lagoons.

Monitoring of adsorption and transfer of organochlorines in soybean seeds and sprouts with mass spectrometric imaging

Development of analytical techniques that can monitor the adsorption, transfer and in-situ distribution of environmental pollutants in agricultural products is essential to ensure the implementation of stringent food safety standards for consumer protection. A mass spectrometric imaging approach is described herein to investigate the dynamic changes and spatial distributions of 4, 4'-DDT (dichlorodiphenyltrichloroethane) in soybean seeds and sprouts during the growth. Soy beans seeds incubated in DDT containing water were sliced in every 20 μm and directly blotted on the surface of a compressed thin film of (Bi2O3)0.07(CoO)0.03(ZnO)0.9 nanoparticles. Endogenous molecules and exogenous DDT compounds in soy bean seeds were ionized and dissociated by photoelectrons that are generated on surfaces of semiconductor nanoparticles upon the irradiation of the 3rd harmonic (355 nm) of Nd3+:YAG laser. Structural identification is achieved by the interpretation of fragment ions resulting from electron-initiated specific bond cleavages or hole oxidization. Mass spectrometric images reveal increased quantities of DDT residues in soy bean seeds and sprouts during the growth. It provides an in situ way without extensive sample preparation to monitor the transfer and distribution of exogenous pollutants as well as the possible impacts on plant growth.

Assessment of a novel device for onsite integrative large-volume solid phase extraction of water samples to enable a comprehensive chemical and effect-based analysis

The implementation of targeted and nontargeted chemical screening analysis in combination with in vitro and organism-level bioassays is a prerequisite for a more holistic monitoring of water quality in the future. For chemical analysis, little or no sample enrichment is often sufficient, while bioanalysis often requires larger sample volumes at a certain enrichment factor for conducting comprehensive bioassays on different endpoints or further effect-directed analysis (EDA). To avoid logistic and technical issues related to the storage and transport of large volumes of water, sampling would benefit greatly from onsite extraction. This study presents a novel onsite large volume solid phase extraction (LVSPE) device tailored to fulfill the requirements for the successful effect-based and chemical screening of water resources and complies with available international standards for automated sampling devices. Laboratory recovery experiments using 251 organic compounds in the log D range from -3.6 to 9.4 (at pH7.0) spiked into pristine water resulted in acceptable recoveries and from 60 to 123% for 159 out of 251 substances. Within a European-wide demonstration program, the LVSPE was able to enrich compounds in concentration ranges over three orders of magnitude (1ngL^-1 to 2400ngL^-1). It was possible to discriminate responsive samples from samples with no or only low effects in a set of six different bioassays (i.e. acetylcholinesterase and algal growth inhibition, androgenicity, estrogenicity, fish embryo toxicity, glucocorticoid activity). The LVSPE thus proved applicable for onsite extraction of sufficient amounts of water to investigate water quality thoroughly by means of chemical analysis and effect-based tools without the common limitations due to small sample volumes.

Passive Sampling in Regulatory Chemical Monitoring of Nonpolar Organic Compounds in the Aquatic Environment

We reviewed compliance monitoring requirements in the European Union, the United States, and the Oslo-Paris Convention for the protection of the marine environment of the North-East Atlantic, and evaluated if these are met by passive sampling methods for nonpolar compounds. The strengths and shortcomings of passive sampling are assessed for water, sediments, and biota. Passive water sampling is a suitable technique for measuring concentrations of freely dissolved compounds. This method yields results that are incompatible with the EU's quality standard definition in terms of total concentrations in water, but this definition has little scientific basis. Insufficient quality control is a present weakness of passive sampling in water. Laboratory performance studies and the development of standardized methods are needed to improve data quality and to encourage the use of passive sampling by commercial laboratories and monitoring agencies. Successful prediction of bioaccumulation based on passive sampling is well documented for organisms at the lower trophic levels, but requires more research for higher levels. Despite the existence of several knowledge gaps, passive sampling presently is the best available technology for chemical monitoring of nonpolar organic compounds. Key issues to be addressed by scientists and environmental managers are outlined.

Using SPMDs for monitoring hydrophobic organic compounds in urban river water in Korea compared with using conventional water grab samples

We aimed to verify the effectiveness of semi-permeable membrane devices (SPMDs) for monitoring hydrophobic organic compounds, such as polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs), that are not easy to detect using conventional grab samples (because of their low concentrations), in water. We used SPMDs and grab samples to monitor PCBs and PBDEs upstream and downstream of a sewage treatment plant (STP) in the Suyeong River in Busan, Korea. Concentrations in three different phases (freely dissolved, apparently dissolved, and particulate) were measured, to investigate the aquatic fate of PCBs and PBDEs. The freely dissolved (SPMD) concentrations were 2-3 times higher than the apparently dissolved and particulate phase (grab sample) concentrations. No meaningful relationships were found between the total PCB and PBDE concentrations of the grab sample and SPMD sample because of the different partitioning behaviors and detection frequencies of the individual chemicals. However, the summed concentrations of specific PCB and PBDE congeners (that were abundant in all samples) in the grab and SPMD samples correlated well (r(2)=0.7451 for PCBs 28+52+153, r(2)=0.9987 for PBDEs 28+47+99). The PBDE concentrations measured using SPMDs decreased with increasing distance from the STP, but no apparent dilution effect was found in the grab samples. Our results show that SPMDs could be used to support grab sampling for specific chemicals, or to trace chemical sources (such as STPs) to the aquatic environment.

Calibration and field performance of triolein embedded acetate membranes for passive sampling persistent organic pollutants in water

Triolein embedded cellulose acetate membrane (TECAM) passive samplers provide potentially powerful tool for monitoring time weighted average concentrations (C(TWA)) of trace hydrophobic organic contaminants in water. To study the field performance of TECAM, exchange kinetics of chemicals between water and TECAM were studied at different temperature and water flow rates. Results showed that the uptake rate constant (k(u)) in TECAM was less sensitive to temperature variation than the SPMD and Chemcatcher. The k(u) in TECAM was sensitive to even a slight change of the flow rate, which required the field calibration using performance reference compounds (PRCs). To estimate C(TWA) by TECAM, both empirical model and WBL model were compared in laboratory conditions, and only small differences were observed between the predicted and measured k(u). Field validation was conducted to test the sampler performance alongside spot sampling. A good agreement of water concentration was obtained by the two sampling techniques.

Passive sampling of bioavailable organic chemicals in Perry County, Missouri cave streams

Two types of passive samplers--semipermeable membrane devices (SPMDs) and polar organic chemical integrative samplers (POCIS)--were deployed in spring 2008 to assess bioavailable concentrations of aquatic contaminants in five cave streams and resurgences in Perry County, Missouri. Study sites represent areas of high cave biodiversity and the only known habitat for grotto sculpin (Cottus carolinae). Time-weighted average (TWA) water concentrations were calculated for 20 compounds (n = 9 SPMDs; n = 11 POCIS) originating primarily from agricultural sources, including two organochlorine insecticides, dieldrin and heptachlor epoxide, which were found at levels exceeding U.S. EPA criteria for the protection of aquatic life. GIS data were used to quantify and map sinkhole distribution and density within the study area. Infiltration of storm runoff and its influence on contaminant transport were also evaluated using land cover and hydrological data. This work provides evidence of cave stream contamination by a mix of organic chemicals and demonstrates the applicability of passive samplers for monitoring water quality in dynamic karst environments where rapid transmission of storm runoff makes instantaneous water sampling difficult.

Effect of sampler material on the uptake of PAHs into passive sampling devices

Increasing demand for simple and reliable passive samplers for monitoring hydrophobic organic contaminants in water has led to increased frequency of use of single-phase polymeric sampling devices. In this study, we evaluate the effect of sampler material on the passive sampling of polycyclic aromatic hydrocarbons (PAHs) in two Norwegian rivers. Low density polyethylene membranes (LDPE), silicone strips and semipermeable membrane devices (SPMDs) with the exact same surface area and conformation were exposed in the Drammen River for overlapping exposures of 24 and 51 d, under identical hydrodynamic conditions. Dissipation rates of performance reference compounds (PRCs) spiked in all samplers were consistent and demonstrated no significant differences in sampler-water analyte exchange kinetics between the two exposures. The transition to fully boundary layer-controlled uptake shown by PRC dissipation rates was confirmed by investigating PAH masses absorbed by the samplers. Masses of analytes with log K(ow)>4.5 absorbed into the samplers were similar and independent of the sampler material used, generally indicating for these compounds that the boundary layer dominated the resistance to mass transfer. The very low variability in analyte masses absorbed across sampler types observed here indicates that much of the overall variability in dissolved contaminant concentrations seen in passive sampler intercomparison studies is likely the result of the uncertainty associated with sampler-water partition coefficients and PRC dissipation rates. PRC dissipation rates and ratios of masses absorbed over 51 and 24 d for these compounds demonstrated integrative sampling over 51 d and no major effects of biofouling on sampling. The equivalence of data obtained using silicone strips and SPMDs supports the use of single-phase polymeric passive sampling devices.

Passive sampling as a tool for obtaining reliable analytical information in environmental quality monitoring

Passive sampling technology has been developing very quickly for the past 20 years, and is widely used for monitoring pollutants in different environments, for example air, water, and soil. It has many significant advantages, including simplicity, low cost, no need for expensive and complicated equipment, no power requirements, unattended operation, and the ability to produce accurate results. The present generation of passive samplers enables detection and analysis of bioavailable pollutants at low and very low concentrations and investigation of the environmental concentration of organic and inorganic pollutants not only on the local scale but also on continental and global scales. This review describes the current application of passive sampling techniques in environmental analysis and monitoring, under both equilibrium and non-equilibrium conditions.

Determination of halogenated natural products in passive samplers deployed along the Great Barrier Reef, Queensland/Australia

Halogenated natural products (HNPs) have been increasingly reported to occur in marine wild life from all oceans. Several HNPs, such as 2,3,3',4,4',5,5'-heptachloro-1'-methyl-1,2'-bipyrrole (1) and 4,6-dibromo-2-(2',4'-dibromo)phenoxyanisole (2'-MeO-BDE 68 or BC-2), were detected at particularly high concentrations in dolphins from Queensland/Australia. About half of the coastline of Queensland (approximately 2500 km) is covered by the Great Barrier Reef, a rich ecosystem hosting a huge variety of species, many of which are known to produce natural compounds. In this study, semipermeable membrane devices (SPMDs) were deployed as passive samplers for about 30 days at 12 marine and 2 nonmarine sites (i.e., rivers) along the Great Barrier Reef as part of a routine monitoring program during November 2007 and May 2008. Q1 and 2'-MeO-BDE 68 were detected at the marine sites with frequencies of about 65% but not in any sample from the two rivers. Further HNPs (2,4,6-tribromophenol, TBP; 2,4,6-tribromoanisole, TBA; 2,2'-dimethoxy-3,3'5,5'-tetrabromobiphenyl, 2,2'-diMeO-BB 80 or BC-1; 3,5-dibromo-2-(2',4'-dibromo)phenoxyanisole, 6-MeO-BDE 47 or BC-3; and 3,5-dibromo-2-(3',5'-dibromo,2'-methoxy)phenoxyanisole, 2',6-diMeO-BDE 68 or BC-11) were detected as well with frequencies of 18-97% in the marine samples, but no polybrominated flame retardants were detected. The highest amount of a single HNP, 2.3 microg/SPMD, was determined for TBP, which had a frequency of detection of only 46%. The maximum (average) amount in the SPMDs from marine sites was 44 ng (12 ng) for (1 and 115 ng (20 ng) for 2'-MeO-BDE 68. A first order kinetic model was used to estimate concentrations of the HNPs in the water phase. Based on the depuration of performance reference compounds obtained at one of the sites, we assumed a sampling rate of 16 L/day. We used this sampling rate to estimate that the highest and average available concentrations of Q1 in the water during the deployment of the SPMD were 97 and 25 pg/L, respectively. The estimated maximum water concentrations of 2'-MeO-BDE 68, 2,2'-diMeO-BB 80, 6-MeO-BDE 47, and 2',6-diMeO-BDE 68 were on average 2-5.5 fold higher than that of Q1. The results confirm that the HNPs are produced throughout the Great Barrier Reef, which appears to be a significant source of these compounds.

Application of semipermeable membrane device (SPMD) to assess air genotoxicity in an occupational environment

Semipermeable membrane device (SPMD) is a passive sampler that sequesters lipophilic contaminants, mimicking the bioconcentration in the fatty tissue of organisms. This study was designed to assess the use of SPMD and biological tests (Comet assay and Ames test) for air monitoring. For this purpose an occupational environment with expected polycyclic aromatic hydrocarbons (PAHs) contamination (coke plant) was selected for a case study. The SPMDs were deployed in five occupational contaminated sites and in a control site. The SPMD dialysates were chemically analysed and examined for in vitro DNA-damaging activity in human cells (Jurkat) by Comet assay and for mutagenicity with the Ames test (TA98 strain, w/o S9). Total suspended particulates were also collected and analysed (GC-MS). No biological effect of SPMD extract was revealed in the control site. On the other hand, air samples collected with SPMDs within the coke plant showed variable degrees of genotoxic and mutagenic activity. The highest effects were associated with the highest PAH level recovered in the SPMDs extracts and in particulate samples. Results obtained support the sensitivity of biological tests associated to SPMD sampling for evaluating the health risk of potentially contaminated work environments highlighting the usefulness of SPMDs for environmental air quality monitoring.