Characterization and fate of polychlorinated biphenyls, polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans in soils and sediments at the Portsmouth Gaseous Diffusion Plant, Ohio

Polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) soil contamination in Lausanne, Switzerland: Combining pollution mapping and human exposure assessment for targeted risk management

In December 2020, high soil concentrations of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) were discovered across large parts of Lausanne, Switzerland. Concentrations reached up to 640 ng TEQ_WHO-2005/kg dry weight. The most likely source was a former municipal waste incinerator. A three-step, multidisciplinary approach to human health risk assessment was conducted to determine the potential population exposure to PCDD/Fs and identify appropriate preventive measures. First, exposure scenarios were developed based on contaminated land uses. Second, the toxicological risks of different scenarios were evaluated using a toxicokinetic model estimating increases in blood serum PCDD/F concentrations over background concentrations from the general population's food consumption. Third, a detailed geostatistical mapping of PCDD/F soil contamination was performed. Stochastic simulations with an external drift and an anisotropic model of the variogram were generated to incorporate the effects of distance from emission source, topography, and main wind directions on the spatial distribution of PCDD/Fs in topsoil. Three main scenarios were assessed: i) direct ingestion of soil by children in playgrounds; ii) consumption of vegetables from private gardens by children and adults; and iii) consumption of food from livestock and poultry raised on contaminated soil. The worst exposure scenario involved the consumption of eggs from private hen houses, resulting in PCDD/F concentrations in serum an order of magnitude higher than might normally be expected. No relevant increases in serum concentrations were calculated for direct soil ingestion and vegetable consumption, except for cucurbitaceous vegetables. Combining mapping and exposure scenario assessment resulted in targeted protective measures for land users, especially concerning food consumption. The results also raised concerns about the potential unsafe consumption of products derived from animals raised on land with PCDD/F concentrations only moderately over environmental background levels.

Toxicity of polychlorinated biphenyls in aquatic environments - A review

The assessment of polychlorinated biphenyls (PCBs) and their congeners resulting from the pollution of all environmental media is inherently related to its persistence and ubiquitous nature. In principle, determination of this class of contaminants are limited to the determination of their concentrations in the various environmental matrices. For solving many problems in this context, knowledge of the emission sources of PCBs, transport pathways, and sites of contamination and biomagnification is of great benefit to scientists and researchers, as well as many regulatory organizations. By far the largest amounts of PCBs, regardless of their discharged points, end up in the soil, sediment and finally in different aquatic environments. By reviewing relevant published materials, the source of origin of PCBs in the environment particularly from different pollution point sources, it is possible to obtain useful information on the nature of different materials that are sources of PCBs, or their concentrations and their toxicity or health effects and how they can be removed from contaminated media. This review focuses on the sources of PCBs in aquatic environments and critically reviews the toxicity of PCBs in aquatic animals and plants. The review also assesses the toxicity equivalency factors (TEFs) of PCBs providing valuable knowledge to other scientists and researchers that enables regulatory laws to be formulated based on selective determination of concentrations regarding their maximum permissible limits (MPLs) allowed. This review also supplies a pool of valuable information useful for designing decontamination technologies for PCBs in media like soil, sediment, and wastewaters.

Comparative study on intercalation-exfoliation and thermal activation modified kaolin for heavy metals immobilization during high-organic solid waste pyrolysis

With the new municipal solid waste classification policy implemented in China, attention on achieving the waste-to-energy disposal of "dry waste" has been growing. Pyrolysis conversion of organic waste into value-added chemicals is a promising method to treat solid waste. However, after removing the non-combustible components of "dry waste", the obtained high-organic solid waste (HSW) contains various heavy metals, which requires urgent attention during thermochemical conversion. To mitigate heavy metals risk, kaolin was employed as additive during HSW pyrolysis, and intercalation-exfoliation and thermal activation modifications were performed on the kaolin to further immobilize and stabilize heavy metals in the derived chars. The characterization results illustrated that the interlayer spacing, pore volume and diameter of kaolin were expanded after intercalation-exfoliation modification, providing more opportunities for the adsorption of metals. The thermal activation method favored the transformation of kaolin into metakaolin via dehydroxylation to enhance its nonhexacoordinated Al proportion and chemisorption. During 450-650 °C, kaolin exhibited an effective solid enrichment performance for targeting heavy metals, and the intercalation-exfoliation and thermal activation modification further enhanced the adsorption capacity of the kaolin for Cd, Cr, Pb and Cr, Cu, Pb, Zn, respectively. Compared with Cu and Zn, additives demonstrated better stabilization effects for Cd, Pb, and Cr, transforming more bioavailable fractions to the residual speciation. Overall, a higher pyrolytic temperature (650 °C) and the addition of effective additives could simultaneously increase the residual fraction and decrease the bioavailable fraction of heavy metals in HSW-derived chars, reducing the potential ecological risk.

Soil pollution and toxicity in an area affected by emissions from a bauxite processing plant and a power plant in Gardanne (southern France)

Soil pollution and toxicity have been investigated in the Gardanne area (southern France) at a range of sites around a recognized pollution source, a bauxite processing plant (BPP), and a power plant (PP). Soil samples were submitted to inorganic and organic analyses and tested for toxicity in two invertebrate models. Inorganic analysis was based on determining elemental concentrations by ICP-MS, encompassing a total of 26 elements including 13 rare earth elements (REEs), of the soil samples and their leachates after 24 or 48 h in seawater. Organic analyses were performed by measuring the sums of 16 polycyclic aromatic hydrocarbons (PAHs) and of total hydrocarbons (C-10 to C-40). Bioassays were carried out on the early life stages of three sea urchin species (Arbacia lixula, Paracentrotus lividus and Sphaerechinus granularis), and on a nematode (Caenorhabditis elegans). Sea urchin bioassays were evaluated by the effects of soil samples (0.1-0.5% dry wt/vol) on developing embryos and on sperm, and scored as: a) % developmental defects, b) inhibition of sperm fertilization success and offspring damage, and c) frequencies of mitotic aberrations. C. elegans 24 h-mortality assay showed significant toxicity associated with soil samples. The effects of soil samples showed heightened toxicity at two groups of sites, close to the BPP main entrance and around the PP, which was consistent with the highest concentrations found for metals and PAHs, respectively. Total hydrocarbon concentrations displayed high concentrations both close to BPP main entrance and to the PP. Further studies of the health effects of such materials in Gardanne are warranted.

Adsorption behavior of 2, 3, 7, 8-tetrachlorodibenzo-p-dioxin on pristine and doped black phosphorene: A DFT study

Polychlorinated dibenzo-p-dioxins (PCDDs) are highly toxic to humans. The search for novel and effective methods and materials for detecting or removing these gas pollutants is becoming more important and urgent. With its high specific surface area, abundance, and variety of potential applications, phosphorene has attracted much research interest. In this study, density functional theory was used to study the interactions between a doped phosphorene sheet and a tetrachlorodibenzo-p-dioxin (TCDD) molecule. The initial configurations of the TCDD and metallic (Ca or Ti) or nonmetallic (S and Se) dopants were investigated during the TCDD-phosphorene interaction study. Adsorption energy, isosurface of electron density difference, and density of states analysis were utilized to explore the interactions between TCDD and phosphorene. The results indicated that Ca dopant effectively improved the interaction between TCDD and phosphorene. Se dopant reduced the interaction between TCDD and phosphorene. Combining interactions between TCDD and the pristine, Ca-doped, and Se-doped phosphorenes, phosphorene could be a promising candidate for TCDD sensing and removal.

Field Analysis of Polychlorinated Biphenyls (PCBs) in Soil Using Solid-Phase Microextraction (SPME) and a Portable Gas Chromatography-Mass Spectrometry System

An expedited field analysis method was developed for the determination of polychlorinated biphenyls (PCBs) in soil matrices using a portable gas chromatography-mass spectrometry (GC-MS) instrument. Soil samples of approximately 0.5 g were measured with a portable scale and PCBs were extracted by headspace solid-phase microextraction (SPME) with a 100 µm polydimethylsiloxane (PDMS) fiber. Two milliliters of 0.2 M potassium permanganate and 0.5 mL of 6 M sulfuric acid solution were added to the soil matrices to facilitate the extraction of PCBs. The extraction was performed for 30 min at 100 ℃ in a portable heating block that was powered by a portable generator. The portable GC-MS instrument took less than 6 min per analysis and ran off an internal battery and helium cylinder. Six commercial PCB mixtures, Aroclor 1016, 1221, 1232, 1242, 1248, 1254, and 1260, could be classified based on the GC chromatograms and mass spectra. The detection limit of this method for Aroclor 1260 in soil matrices is approximately 10 ppm, which is sufficient for guiding remediation efforts in contaminated sites. This method was applicable to the on-site analysis of PCBs with a total analysis time of 37 min per sample. However, the total analysis time could be improved to less than 7 min per sample by conducting the rate-limiting extraction step for different samples in parallel.

Dioxin risk assessment: mechanisms of action and possible toxicity in human health

Dioxin-like compounds (DLCs) have been classified by the World Health Organization (WHO) as one of the most persistent toxic chemical substances in the environment, and they are associated with several occupational activities and industrial accidents around the world. Since the end of the 1970s, these toxic chemicals have been banned because of their human toxicity potential, long half-life, wide dispersion, and they bioaccumulate in the food web. This review serves as a primer for environmental health professionals to provide guidance on short-term risk assessment of dioxin and to identify key findings for health and exposure assessment based on policies of different agencies. It also presents possible health effects of dioxins, mechanisms of action, toxic equivalency factors (TEFs), and dose-response characterization. Key studies related to toxicity values of dioxin-like compounds and their possible human health risk were identified through PubMed and supplemented with relevant studies characterized by reviewing the reference lists in the review articles and primary literature. Existing data decreases the scope of analyses and models in relevant studies to a manageable size by focusing on the set of important studies related to the perspective of developing toxicity values of DLCs.

Integrated ecological risk assessment of dioxin compounds

Current ecological risk assessment (ERA) schemes focus mainly on bioaccumulation and toxicity of pollutants in individual organisms. Ecological models are tools mainly used to assess ecological risks of pollutants to ecosystems, communities, and populations. Their main advantage is the relatively direct integration of the species sensitivity to organic pollutants, the fate and mechanism of action in the environment of toxicants, and life-history features of the individual organism of concern. To promote scientific consensus on ERA schemes, this review is intended to provide a guideline on short-term ERA involving dioxin chemicals and to identify key findings for exposure assessment based on policies of different agencies. It also presents possible adverse effects of dioxins on ecosystems, toxicity equivalence methodology, environmental fate and transport modeling, and development of stressor-response profiles for dioxin-like chemicals.