Comparative electrochemical degradation of salicylic and aminosalicylic acids: Influence of functional groups on decay kinetics and mineralization

Lab-on-a chip electrochemical sensing platform for simultaneous, ultra-sensitive and on-spot detection of 4-aminosalicylic acid and 5-aminosalicylic acid based on synergistic potential of chitosan functionalized MWCNTs supported on Ni doped Bi2S3

Mesalamine or 5-aminosalicylic acid (5-ASA) and its isomer 4-aminosalicylic acid (4-ASA), well known key therapeutic agents used to treat inflammatory bowel diseases (IBDs) can pose toxicity risks upon unregulated consumption. However, their simultaneous real-time detection from physiological fluids like urine remains unexplored. This study presents an innovative electrochemical sensing platform using modified screen-printed electrodes capable of simultaneous detection of both the drugs by harnessing the synergistic potential of a novel nanocomposite comprising chitosan functionalized multi-walled carbon nanotubes and nickel doped bismuth sulphide. Comprehensive optical and microstructural characterization validate the modified sensor platform's morphological characteristics. The sensor was evaluated using CV and DPV, exhibiting notably low detection limits which is of the value 39.559 μM for 5-ASA and 85.21 μM for 4-ASA. Sensitivity was found to be 0.174 μA μM-1cm-2 for the linear dynamic range (LDR) of 50 μM-5750 μM for 5-ASA and 0.139 μA μM-1cm-2 for the linear dynamic range (LDR) of 100 μM-2200 μM for 4-ASA. Moreover, the adaptability of the sensor for integration into hand-held point-of-care devices for practical application has been demonstrated in this paper. Experimental validation using real urine samples underscores the sensor's impressive recovery rate of 98-99.6 % for 5-ASA and 95.12-99.24 % for 4-ASA and its capability of detecting target drugs even when present with typical urinary constituents as interferences. The real-world applicability of this sensing platform is further emphasized by conducting experiments on miniaturized hand-held device thus making it a promising tool for on-the-spot detection, offering substantial potential for future integration into point-of-care diagnostic devices to monitor patients requiring precise medical monitoring. Our approach offers unprecedented real-time identification capabilities of 4-ASA and 5-ASA which has not been explored before.

Electro-bioremediation of a mixture of structurally different contaminants of emerging concern: Uncovering electrokinetic contribution

This study analyses the electrokinetic (EK) contribution to the removal from a clay soil of a mixture of 10 different contaminants of emerging concern (CECs; 17β-estradiol, E2; sulfamethoxazole, SMX; bisphenol A, BPA; ibuprofen, IBU; 17α-ethinylestradiol, EE2; oxybenzone, OXY; diclofenac, DCF; triclosan, TCS; caffeine, CAF; carbamazepine, CBZ). After 4 days, the CECs natural attenuation was between 0% (CBZ) and 90% (E2) yet increasing with the application of EK (20 mA, 12 h ON/OFF) to 14% (CBZ) and 100% (E2). When EK was applied, the CECs more recalcitrant to biodegradation (i.e. ≤ 13% biotic decay) mostly underwent electro-chemical induced degradation (OXY, DCF, TCS, CAF, CBZ). Daily irrigation enhanced the rates of the electro-oxidation -osmosis and -migration, increasing the CECs decay. After 8 days of EK treatment, the CECs decay increased, surpassing the decay lag phase of some compounds (OXY, TCS, and CBZ). Yet after 16 days, most CECs showed similar removals with and without EK, with EK only acting positively on SMX, OXY, TCS and CBZ (ca. +10%). Our results support that EK application can improve the removal of CECs from soil, however, under the conditions tested, 16-day treatment lead to pH alterations that decreased the bioremediation efficiency and inhibited electro-degradation near the cathode.

A review on the photoelectro-Fenton process as efficient electrochemical advanced oxidation for wastewater remediation. Treatment with UV light, sunlight, and coupling with conventional and other photo-assisted advanced technologies

Wastewaters containing recalcitrant and toxic organic pollutants are scarcely decontaminated in conventional wastewater facilities. Then, there is an urgent challenge the development of powerful oxidation processes to ensure their organic removal in order to preserve the water quality in the environment. This review presents the recent development of an electrochemical advanced oxidation process (EAOP) like the photoelectro-Fenton (PEF) process, covering the period 2010-2019, as an effective treatment for wastewater remediation. The high oxidation ability of this photo-assisted Fenton-based EAOP is due to the combination of in situ generated hydroxyl radicals and the photolytic action of UV or sunlight irradiation over the treated wastewater. Firstly, the fundamentals and characteristics of the PEF process are described to understand the role of oxidizing agents. Further, the properties of the homogeneous PEF process with iron catalyst and UV irradiation and the benefit of sunlight in the homogeneous solar PEF one (SPEF) are discussed, supported with examples over their application to the degradation and mineralization of synthetic solutions of industrial chemicals, herbicides, dyes and pharmaceuticals, as well as real wastewaters. Novel heterogeneous PEF processes involving solid iron catalysts or iron-modified cathodes are subsequently detailed. Finally, the oxidation power of hybrid processes including photocatalysis/PEF, solar photocatalysis/SPEF, photoelectrocatalysis/PEF and solar photoelectrocatalysis/SPEF, followed by that of sequential processes like electrocoagulation/PEF and biological oxidation coupled to SPEF, are analyzed.

LC-MS analysis of p-aminosalicylic acid under electrospray ionization conditions manifests a profound solvent effect

Under identical mass spectrometric conditions, chromatographic peak intensities of p-aminosalicylic acid recorded by LC-MS, using methanol as the mobile phase are drastically different from those acquired using is it acetonitrile as the eluent.

Electro-Fenton oxidation of para-aminosalicylic acid: degradation kinetics and mineralization pathway using Pt/carbon-felt and BDD/carbon-felt cells

Degradation of a widely used antibiotic, the para-aminosalicylic acid (PAS), and mineralization of its aqueous solution was investigated by electro-Fenton process using Pt/carbon-felt and boron-doped diamond (BDD)/carbon-felt cells with applied currents in the range of 50-1000 mA. This process produces the highly oxidizing species, the hydroxyl radical (^•OH), which is mainly responsible for the oxidative degradation of PAS. An absolute rate constant of 4.17 × 10⁹ M^-1 s^-1 for the oxidation of PAS by ^●OH was determined from the competition kinetics method. Degradation rate of PAS increased with current reaching an optimal value of 500 mA with complete disappearance of 0.1 mM PAS at 7 min using Pt/carbon-felt cell. The optimum degradation rate was reached at 300 mA for BDD/carbon-felt. The latter cell was found more efficient in total organic carbon (TOC) removal where a complete mineralization was achieved within 240 min. A multi-step mineralization process was observed with the formation of a number of aromatic intermediates, short-chain carboxylic acids, and inorganic ions. Eight aromatic intermediate products were identified using both LC-Q-ToF-MS and GC-MS techniques. These products were the result of hydroxylation of PAS followed by multiple additions of hydroxyl radicals to form polyhydroxylated derivatives. HPLC and GC/MS analyses demonstrated that extended oxidation of these intermediate products conducted to the formation of various short-chain carboxylic acids. Prolonged electrolysis resulted in a complete mineralization of PAS with the evolution of inorganic ions such as NO₃^- and NH₄⁺. Based on the identified intermediates, carboxylic acids and inorganic ions, a plausible mineralization pathway is also deduced. The remarkably high degree of mineralization (100%) achieved by the present EF process highlights the potential application of this technique to the complete removal of salicylic acid-based pharmaceuticals from contaminated water.

Adsorption performance of salicylic acid on a novel resin with distinctive double pore structure

Two approaches were used to synthesize two resins with different pore structures. In one way, the CH₂Cl groups in macroporous chloromethylated polystyrene resin were transformed to methylene bridges, and achieved a hypercrosslinked resin with plentiful micropores (denoted GQ-06). In the other way, 50% of the CH₂Cl groups in chloromethylated polystyrene resin was used to produce micropores, while the residual 50% of the CH₂Cl groups was reacted with 2-aminopyridine, and prepared another resin with double pore structure of hypercrosslinked resin and macroporous resin (denoted GQ-11). The adsorption of salicylic acid (SA) on GQ-11 was investigated using GQ-06 as the reference adsorbent. The effect of pH on the adsorption of SA on GQ-06 was consistent with the dissociation curve of SA. The maximum adsorption capacity of SA on GQ-11 was observed at the solution pH of 2.64. The greater adsorption rate of SA on GQ-11 than that of GQ-06 was attributed to its double pore structure. The multifunctional adsorption mechanism of anion exchange and hydrophobic interaction resulted in the larger equilibrium capacity of SA on GQ-11 than that of GQ-06. GQ-06 and GQ-11 could be regenerated by absolute alcohol and 80% of alcohol -0.5mol/L of sodium hydroxide aqueous solution, respectively.

Elimination of radiocontrast agent diatrizoic acid by photo-Fenton process and enhanced treatment by coupling with electro-Fenton process

The removal of radiocontrast agent diatrizoic acid (DIA) from water was performed using photo-Fenton (PF) process. First, the effect of H2O2 dosage on mineralization efficiency was determined using ultraviolet (UV) irradiation. The system reached a maximum mineralization degree of 60 % total organic carbon (TOC) removal at 4 h with 20 mM initial H2O2 concentration while further concentration values led to a decrease in TOC abatement efficiency. Then, the effect of different concentrations of Fenton's reagents was studied for homogeneous Fenton process. Obtained results revealed that 0.25 mM Fe(3+) and 20 mM H2O2 were the best conditions, achieving 80 % TOC removal efficiency at 4 h treatment. Furthermore, heterogeneous PF treatment was developed using iron-activated carbon as catalyst. It was demonstrated that this catalyst is a promising option, reaching 67 % of TOC removal within 4 h treatment without formation of iron leachate in the medium. In addition, two strategies of enhancement for process efficiency are proposed: coupling of PF with electro-Fenton (EF) process in two ways: photoelectro-Fenton (PEF) or PF followed by EF (PF-EF) treatments, achieving in both cases the complete mineralization of DIA solution within only 2 h. Finally, the Microtox tests revealed the formation of more toxic compounds than the initial DIA during PF process, while, it was possible to reach total mineralization by both proposed alternatives (PEF or PF-EF) and thus to remove the toxicity of DIA solution.