Degradation of bisphenol a using peroxymonosulfate activated by WO3@MoS2/Ag hollow nanotubes photocatalyst

Photonic crystal-assisted sub-bandgap photocatalysis via triplet-triplet annihilation upconversion for the degradation of environmental organic pollutants

This study explores novel approaches to enhance photocatalysis efficiency by introducing a photonic crystal (PC)-enhanced, multi-layered sub-bandgap photocatalytic reactor. The design aims to effectively utilize sub-bandgap photons that might otherwise go unused. The device consists of three types of layers: (1) two polymeric triplet-triplet annihilation upconversion (TTA-UC) layers converting low-energy green photons (λEx = 532 nm, 2.33 eV) to high-energy blue photons (λEm = 425 nm, 2.92 eV), (2) a platinum-decorated WO3 layer (Eg = 2.8 eV) serving as a visible-light photocatalyst, and (3) a PC layer optimizing both TTA-UC and photocatalysis. The integration of the PC layer resulted in a 1.9-fold increase in UC emission and a 7.9-fold enhancement in hydroxyl radical (•OH) generation, achieved under low-intensity sub-bandgap irradiation (17.6 mW cm-2). Consequently, the combined layered structure of TTA/Pt-WO3/TTA/PC achieved a remarkable 38.8-fold improvement in •OH production, leading to outstanding degradation capability for various organic pollutants (e.g., 4-chlorophenol, bisphenol A, and methylene blue). This multi-layered sub-bandgap photocatalytic structure, which uniquely combines TTA-UC and PC layers, offers valuable insights into designing efficient photocatalytic systems for future solar-driven environmental remediation.

Visible-light-induced photocatalyst-free cascade cyclization of 3-(2-(ethynyl)phenyl)quinazolinones to sulfonated quinolino[2,1-b]quinazolinones

A visible-light-induced K2S2O8-promoted cascade sulfonation/cyclization reaction was established using 3-(2-(ethynyl)phenyl)quinazolinones as efficient substrates under mild conditions. A series of sulfonated quinolino[2,1-b]quinazolinones were successfully synthesized under transition-metal- and photocatalyst-free conditions. Notably, this strategy has the advantages of room temperature and simple operation, easy scale-up, and good functional group tolerance.

Advances in the Removal of Organic Pollutants from Water by Photocatalytic Activation of Persulfate: Photocatalyst Modification Strategy and Reaction Mechanism

Environmental pollution caused by persistent organic pollutants has imposed big threats to the health of human and ecological systems. The development of efficient methods to effectively degrade and remove these persistent organic pollutants is therefore of paramount importance. Photocatalytic persulfate-based advanced oxidation technologies (PS-AOTs), which depend on the highly reactive SO4 - radicals generated by the activation of PS to degrade persistent organic pollutants, have shown great promise. This work discusses the application and modification strategies of common photocatalysts in photocatalytic PS-AOTs, and compares the degradation performance of different catalysts for pollutants. Furthermore, essential elements impacting photocatalytic PS-AOTs are discussed, including the water matrix, reaction process mechanism, pollutant degradation pathway, singlet oxygen generation, and potential PS hazards. Finally, the existing issues and future challenges of photocatalytic PS-AOTs are summarized and prospected to encourage their practical application. In particular, by providing new insights into the PS-AOTs, this review sheds light on the opportunities and challenges for the development of photocatalysts with advanced features for the PS-AOTs, which will be of great interests to promote better fundamental understanding of the PS-AOTs and their practical applications.

Synergistic photocatalytic degradation mechanism of BiOClxI1-x-OVs based on oxygen vacancies and internal electric field-mediated solid solution

The easy recombination of photoexcited electron-hole pairs is a serious constraint for the application of photocatalysts. In this work, a range of BiOClxI1-x solid solutions with abundant oxygen vacancies (BiOClxI1-x-OVs) were synthesized. In particular, the optimal BiOCl0.5I0.5-OVs sample exhibited almost 100% removal of bisphenol A (BPA) within 45 min visible light exposure, which was 22.4, 3.1 and 4.5 times greater than BiOCl, BiOCl-OVs and BiOCl0.5I0.5, respectively. Besides, the apparent quantum yield of BPA degradation reaches 0.24%, better than some other photocatalysts. Benefiting from the synergism of oxygen vacancies and solid solution, BiOCl0.5I0.5-OVs gained an enhanced photocatalytic capacity. Oxygen vacancies induced an intermediate defective energy level in BiOClxI1-x-OVs materials, promoting the generation of photogenerated electrons and the molecular oxygen adsorption to produce more active oxygen radicals. Meanwhile, the fabricated solid solution structure enhanced the internal electric field between BiOCl layers, achieving rapid migration of photoexcited electrons and effective segregation of photoinduced charge carriers. Thus, this study provides a viable idea to solve the problems of poor visible light absorption of BiOCl-based photocatalysts and easy reorganization of electrons and holes in the photocatalysts.

Boosting charge separation in graphdiyne quantum dots/hollow tubular carbon nitride heterojunction for water pollutant degradation

Non-desirable solar energy absorption and poor charge transfer efficiency are two problems that limit the peroxymonosulfate (PMS) photocatalytic techniques. Herein, a metal-free boron-doped graphdiyne quantum dot (BGDs) modified hollow tubular g-C₃N₄ photocatalyst (BGD/TCN) was synthesized to activate PMS and achieved effective space separation of carriers for degradation of bisphenol A. With 0.5 mM PMS, the degradation rate of bisphenol A (20 ppm) was 0.0634 min^-1, 3.7-fold higher than that of TCN itself. The roles of BGDs in the distribution of electrons and photocatalytic property were well identified by experiments and density functional theory (DFT) calculations. The possible degradation intermediate products of bisphenol A were monitored by mass spectrometer and demonstrated to be nontoxic using ecological structure activity relationship modeling (ECOSAR). Finally, this newly-designed material was successfully applied in actual water bodies, which further renders its promising prospect for actual water remediation.

Efficient Activation of Peroxymonosulfate by V-Doped Graphitic Carbon Nitride for Organic Contamination Remediation

Advanced oxidation processes (AOPs) based on peroxymonosulfate (PMS) activation have been developed as an ideal pathway for completely eradication of recalcitrant organic pollutants from water environment. Herein, the V-doped graphitic carbon nitride (g-C₃N₄) is rationally fabricated by one-step thermal polymerization method to activate PMS for contamination decontamination. The results demonstrate the V atoms are successfully integrated into the framework of g-C₃N₄, which can effectively improve light absorption intensity and enhance charge separation. The V-doped g-C₃N₄ displays superior catalytic performance for PMS activation. Moreover, the doping content has a great influence on the activation performances. The radical quenching experiments confirm •O₂^-, SO₄^•-, and h⁺ are the significant species in the catalytic reaction. This work would provide a feasible strategy to exploit efficient g-C₃N₄-based material for PMS activation.

Ascorbic acid enhanced MnFe2O4/peroxymonosulfate oxidation of organic pollutant: Key role of singlet oxygen generation and Fe/Mn cycling

The activated peroxymonosulfate (PMS) process has been widely applied for degrading organic pollutants. However, its application is limited by low metal cycling, and the contribution of oxygen species remains unclear. Here, the crystal structure, surface morphology, and elemental valence of the synthesized manganese ferrite (MnFe₂O₄) catalyst were investigated by SEM, HRTEM, XRD, and XPS. A novel MnFe₂O₄/PMS/ascorbic acid (AA) system was constructed to enhance the Fe/Mn cycling on the surfaces of the MnFe₂O₄ catalyst. The addition of AA can significantly increase the decomposition of organic pollutants, and the apparent rate constant of the MnFe₂O₄/PMS/AA system is 8.2 times higher than that of MnFe₂O₄/PMS. AA facilitates the reduction of Fe/Mn(III) and the dissolution of Fe/Mn(II), creating a Fe/Mn cycle between the heterogeneous and homogeneous interfaces of the catalyst. Furthermore, AA greatly increases the activity of adsorbed oxygen on the catalyst surfaces, generating a large amount of singlet oxygen (¹O₂), which contributes significantly to the destruction of organic pollutants. The efficient, fast, and environmentally friendly PMS activation method in this study can provide reliable technical support for treating refractory organic pollutants in water.

Bisphenol A Removal Using Visible Light Driven Cu2O/PVDF Photocatalytic Dual Layer Hollow Fiber Membrane

Bisphenol A (BPA) is amongst the endocrine disrupting compounds (EDCs) that cause illness to humans and in this work was removed using copper (I) oxide (Cu2O) visible light photocatalyst which has a narrow bandgap of 2.2 eV. This was done by embedding Cu2O into polyvinylidene fluoride (PVDF) membranes to generate a Cu2O/PVDF dual layer hollow fiber (DLHF) membrane using a co-extrusion technique. The initial ratio of 0.25 Cu2O/PVDF was used to study variation of the outer dope extrusion flowrate for 3 mL/min, 6 mL/min and 9 mL/min. Subsequently, the best flowrate was used to vary Cu2O/PVDF for 0.25, 0.50 and 0.75 with fixed outer dope extrusion flowrate. Under visible light irradiation, 10 mg/L of BPA was used to assess the membranes performance. The results show that the outer and inner layers of the membrane have finger-like structures, whereas the intermediate section of the membrane has a sponge-like structure. With high porosity up to 63.13%, the membrane is hydrophilic and exhibited high flux up to 13,891 L/m2h. The optimum photocatalytic membrane configuration is 0.50 Cu2O/PVDF DLHF membrane with 6 mL/min outer dope flowrate, which was able to remove 75% of 10 ppm BPA under visible light irradiation without copper leaching into the water sample.

Mechanistic inference on the roles of oxygenic functional groups that activate peroxymonosulfates in graphene for advanced oxidation

Developing carbon-based catalysts for advanced oxidation processes, owing to their abundant reserves, metal-free properties as well as great resistance to acids and alkalis, presents an enticing prospect for environmental remediation.

Recoverable and reusable visible-light photocatalytic performance of CVD grown atomically thin MoS2 films

The decomposition of water pollutants including industrial dyes and chemicals via photocatalytic decontamination is one of the major investigated problems in recent years. Two-dimensional molybdenum disulfide (MoS₂) layers have shown great promise as an efficient visible-light photocatalyst owing to its numerous active sites and large surface area. In this study, atomically thin MoS₂ films of different thicknesses from monolayer to five-layer and ten layers were fabricated on sapphire substrates using chemical vapor deposition (CVD). We demonstrate that these MoS₂ thin films can be used as a photocatalyst to degrade Methylene Blue (MB) dye and can be recovered completely with utmost structural and chemical stability. Under visible-light irradiation, the MB absorption peak completely disappears with ∼95.6% of degradation after 120 min. We also demonstrate the reusability of the MoS₂ thin films without significantly losing the photocatalytic activity even after 5-cycles of degradation studies. The chemical and structural stability of the MoS₂ films after 5-cycles of degradation studies were affirmed using various spectroscopic studies. Our findings suggest that the MB degradation efficiency increases from 19.01% to 98.46% with an increase in pH from 4 to 14. Our approach may facilitate a further design of other transition metal dichalcogenides-based recoverable photocatalysts for industrial applications.

Peroxymonosulfate Activation by Bi2WO6/BiOCl Heterojunction Nanocomposites under Visible Light for Bisphenol A Degradation

The combination of peroxymonosulfate (PMS) activation and photocatalysis has proven to be effective for organic contaminants treatment. However, the construction of an efficient catalytic material is an important challenge. Herein, novel Bi₂WO₆/BiOCl heterojunction nanocomposites were successfully designed and fabricated using a facile and effective strategy for bisphenol A (BPA) photodegradation with PMS activation. The well-designed heterojunction with improvement of the contact area and interface microstructure was obtained through in situ growth of the Bi₂WO₆ on the surface of BiOCl. The Bi₂WO₆/BiOCl nanocomposites exhibit excellent catalytic performance in PMS activation for BPA degradation under visible light irradiation. A possible photocatalytic reaction mechanism was systematically revealed. The excellent catalytic performance is mainly attributed to the strong interaction between Bi₂WO₆ and BiOCl, resulting in an enhanced photoabsorption and a more efficient interfacial charge separation and transfer. This paper provides a novel strategy to design efficient catalytic materials for organic contaminants remediation with PMS activation.

Transcriptomic analysis reveals ligninolytic enzymes of white-rot fungus Phanerochaete sordida YK-624 participating in bisphenol F biodegradation under ligninolytic conditions

Bisphenol F (BPF) is widely used in the plastic manufacturing industry as a replacement for bisphenol A (BPA) because BPF and BPA have similar structures and comparable properties. However, BPF is ubiquitously present in the environment and has higher toxicity to humans. This study is the first to report BPF degradation using the white-rot fungus Phanerochaete sordida YK-624 under ligninolytic conditions (pH=4.5, 30 °C). P. sordida YK-624 almost completely degraded BPF within 4 days. Moreover, functional genes involved in BPF degradation were detected by RNA-Seq. Metabolic processes and peroxidases were enriched by GO analysis, and the metabolic pathway was enriched according to the KEGG pathway analysis. These results suggested that P. sordida YK-624 could secrete higher levels of ligninolytic enzymes lignin peroxidase (LiP) and manganese peroxidase (MnP) for BPF degradation. The results indicated that LiPs and MnPs are important for BPF degradation and cytochrome P450s play a small role. Furthermore, reliability of the RNA-Seq results was validated by qRT-PCR.

Novel broad-spectrum-driven g-C3N4 with oxygen-linked band and porous defect for photodegradation of bisphenol A, 2-mercaptophenthiazole and ciprofloxacin

Abundant active oxygen free radicals could efficiently remove refractory organic pollutants. In previous research, the original carbon nitride can form more hydrogen peroxide, however, owing to the limitation of its band structure, the original carbon nitride cannot decompose the hydrogen peroxide to generate more active oxygen free radicals. Herein, this work reports a simple bottom-up synthesis method, which synthesize a broad-spectrum-response carbon nitride (CN-CA) with oxygen-linked band and porous defect structure, while adjusting the band structure, and the introduction of the oxygen-linked band structure can also decompose the hydrogen peroxide produced by the original carbon nitride to form more active oxygen free radicals. Instrumental characterization and analysis of experimental results revealed the important role of oxygen-linked band and porous defects in adjusting the CN-CA energy band structure and improving its visible light absorption. The optimal CN-CA displays an outstanding photocatalytic degradation ability, that degradation rate of bisphenol A (BPA) reaches 99.8% within 150 min, the reaction rate constant of which is 6.77 times higher than that of pure g-C₃N₄, as also demonstrated with 2-mercaptophenthiazole (MBT) and ciprofloxacin (CIP). Meanwhile, the excellent degradation performance under blue LED (450-462 nm) and green LED (510-520 nm) exhibits the broad-spectrum characteristics of CN-CA. The degradation pathways of BPA and MBT were analyzed via HPLC-MS. Moreover, the primary active species were detected as O₂^-, OH and h⁺ based on the trapping experiments and ESR. This research provides a new strategy for g-C₃N₄ modified by porous defects and oxygen-linked band structure for environmental remediation.

A critical review on the applications and potential risks of emerging MoS2 nanomaterials

Molybdenum disulfide (MoS₂) nanomaterials have been widely used in various fields such as energy store and transformation, environment protection, and biomedicine due to their unique physicochemical properties. Unfortunately, such large-scale production and use of MoS₂ nanomaterials would inevitably release into the environmental system and then potentially increase the risks of wildlife/ecosystem and human beings as well. In this review, we first introduce the physicochemichemical properties, synthetic methods and environmental behaviors of MoS₂ nanomaterials and their typical functionalized materials, then summarize their environmental and biomedical applications, next assess their potential health risks, covering in vivo and in vitro studies, along with the underlying toxicological mechanisms, and last point out some special phenomena about the balance between applications and potential risks. This review aims to provide guidance for harm predication induced by MoS₂ nanomaterials and to suggest prevention measures based on the recent research progress of MoS₂' applications and exerting toxicological data.

Galvanic oxidation processes (GOPs): An effective direct electron transfer approach for organic contaminant oxidation

The activation of peroxymonosulfate (PMS) for organic contaminant oxidation usually relies on the formation of reactive oxygen species (ROSs). However, the ubiquitous anions and natural organic matter can easily scavenge ROSs and/or PMS, resulting in lower efficiencies and/or the formation of toxic byproducts. Relying on the unique long-distance electron transfer property, the recently developed Galvanic Oxidation Process (GOP) successfully achieved bisphenol A (BPA) degradation when BPA and PMS were physically separated in two reactors. In this study, we systematically investigated the performance of GOP at different PMS or BPA concentrations, pH, and ionic strength (IS) in both PMS and BPA solutions. The kinetic modeling employing the Langmuir-Hinshelwood model at different BPA concentrations suggested that although BPA and PMS were physically separated, the oxidation of the adsorbed BPA and reduction of the adsorbed PMS still followed a similar mechanism to that in traditional heterogeneous catalytic processes. The anions in the target water showed little impact on BPA degradation; higher IS enhanced the solution conductivity but inhibited BPA and electrode interactions, resulting in increased and then decrease BPA degradation rate. The electrodes presented high stability with a rate increase of 12% after 13 times of uses, and their hydration significantly facilitated BPA degradation but reduced the current by decreasing the potential difference between the anode and cathode. The graphite sheet itself without catalyst coating was also capable of shuttling electrons, while the use of a graphite fiber anode increased the BPA degradation by near 100% because of the larger surface area. The developed continuous stirred-tank reactor coupled with GOP (CSTR-GOP) achieved stable BPA degradation in less than 35 min and its scaling up is promising for future applications.

Facile Fabrication of Z-Scheme Bi2WO6/WO3 Composites for Efficient Photodegradation of Bisphenol A with Peroxymonosulfate Activation

The rational fabrication of direct Z-scheme heterostructures photocatalysts is a pivotal strategy to boost the interfacial charge migration and separation. Herein, direct Z-scheme Bi2WO6/WO3 composites were rationally fabricated for the degradation of bisphenol A combined with the activation of peroxymonosulfate (PMS). The tight interface contact between Bi2WO6 and WO3 was successfully formed by the in situ epitaxial growth of ultrathin Bi2WO6 nanosheets at the surface of WO3 nanorods. The Bi2WO6/WO3 composite presented highly efficient catalytic performance toward degradation of BPA with PMS activation as compared to the WO3 and Bi2WO6. PMS can dramatically boost the photocatalytic activity of the composites. Moreover, the results of active radical scavenging experiments revealed that h+, •O2-, and •SO4- are critical active species in the photodegradation reaction. Finally, the photocatalytic mechanism for the degradation of BPA is also discussed in detail. The great improvement of photocatalytic performance should be ascribed to the effective formation of the direct Z-scheme heterojunctions between Bi2WO6 and WO3, resulting in improved light absorption, an efficient transfer and separation of photoinduced charge carriers, and a considerable amount of the electrons and holes with strong reduction and oxidation abilities. The study might provide new inspirations to design and construct heterostructured nanomaterials with outstanding photoactivity for environmental remediation.