Efficient electrochemical reduction of nitrobenzene by nitrogen doped porous carbon

Microbial-induced reassembly of phosphate sol: New insight into the removal and fixation of divalent manganese in natural aquatic environment

The commonly used precipitation method struggles to effectively remove low-concentration heavy metals from water. Herein, we demonstrate that the formation of non-settleable phosphate sols at a low low-concentration is the main reason by using phosphate precipitation as an example and report a new method called microbial-induced reassembly (MIR) of the phosphate sols for the removal and fixation of divalent manganese (Mn(II)) from low-concentration wastewater under neutral conditions. Under the induction of microorganisms, the Mn3(PO4)2 sols formed in low Mn(II) concentration could be reassembled into larger and flower-like precipitates with good settleability, allowing for the removal and fixation of low-concentration Mn(II) through natural settlement. Moreover, MIR is able to reduce Mn(II) levels from 10 mg/L to as low as 0.1 mg/L, achieving nearly 100% removal. The interaction between bacterial protein functional groups and Mn2+ ions drives the reassembly of Mn3(PO4)2 sols. MIR of phosphate sol is applicable to both Gram-negative bacteria, such as Escherichia coli, and Gram-positive bacteria, such as Staphylococcus aureus, as well as mixed aerobes. It is also suitable for the removal and fixation of other heavy metals like copper and zinc. This study offers a novel approach for the removal of low-concentration heavy metals from water, more importantly provides a new insight into the migration and fixation of heavy metals in the form of phosphate precipitates induced by microbes in natural aquatic environments.

Potential and characteristics on nitrobenzene degradation by biological acidification

Biological acidification, efficient and low-cost biotechnology, is crucial in treating pharmaceutical, pesticide water, and petrochemical wastewater. Nitrobenzene is a typical organic pollutant in petrochemical wastewater with high toxicity and long persistence. However, its effect on hydrolysis acidification is yet to be fully elucidated. The present study sought to investigate the inhibitory effect of nitrobenzene on biological acidification. Volatile fatty acid toxicity assays were performed to examine the acid production of sludge exposed to different concentrations of nitrobenzene over time. Extracellular polymeric substances (EPS) were measured by the phenol-sulfuric acid technique and Coomassie brilliant blue G250 to characterize the changes in extracellular polymers after exposure to different nitrobenzene concentrations. Enzyme-linked immunosorbent assay kits were employed to evaluate representative enzyme activities of acidified bacteria after exposure to nitrobenzene. Nitrobenzene and its products were respectively determined by liquid chromatography and gas chromatography-mass spectrometry, and the transformation properties of nitrobenzene were explored in the context of acid production, EPS, and changes in key enzymes. Results showed that nitrobenzene inhibited acid production at high concentrations (median effective concentration (EC50) = 104.81 mg/L), and acetic fermentation was predominant. Furthermore, the amounts of EPS significantly dropped when the nitrobenzene concentration was above 100 mg/L. The contents of key enzymes decreased with an increase in nitrobenzene concentration. The process of nitrobenzene hydrolysis acidification was characterized as follows: EPS and anaerobic granular sludge adsorbed nitrobenzene, which is subsequently transformed to aniline by the joint action of microbial consortium reductase. Therefore, high concentrations of nitrobenzene should be pretreated before entering the biological treatment system since the capacity of bio-acidification to remove it is restricted.

Bibliometric analysis and systematic review of electrochemical methods for environmental remediation

Electrochemical methods are increasingly favored for remediating polluted environments due to their environmental compatibility and reagent-saving features. However, a comprehensive understanding of recent progress, mechanisms, and trends in these methods is currently lacking. Web of Science (WoS) databases were utilized for searching the primary data to understand the knowledge structure and research trends of publications on electrochemical methods and to unveil certain hotspots and future trends of electrochemical methods research. The original data were sampled from 9080 publications in those databases with the search deadline of June 1st, 2022. CiteSpace and VOSviewer software facilitated data visualization and analysis of document quantities, source journals, institutions, authors, and keywords. We discussed principles, influencing factors, and progress related to seven major electrochemical methods. Notably, publications on this subject have experienced significant growth since 2007. The most frequently-investigated areas in electrochemical methods included novel materials development, heavy metal remediation, organic pollutant degradation, and removal mechanism identification. "Advanced oxidation process" and "Nanocomposite" are currently trending topics. The major remediation mechanisms are adsorption, oxidation, and reduction. The efficiency of electrochemical systems is influenced by material properties, system configuration, electron transfer efficiency, and power density. Electro-Fenton exhibits significant advantages in achieving synergistic effects of anodic oxidation and electro-adsorption among the seven techniques. Future research should prioritize the improvement of electron transfer efficiency, the optimization of electrode materials, the exploration of emerging technology coupling, and the reduction in system operation and maintenance costs.

Recent Progress Toward Electrocatalytic Conversion of Nitrobenzene

Despite that extensive efforts have been dedicated to the search for advanced catalysts to boost the electrocatalytic nitrobenzene reduction reaction (eNBRR), its progress is severely hampered by the limited understanding of the relationship between catalyst structure and its catalytic performance. Herein, this review aims to bridge such a gap by first analyzing the eNBRR pathway to present the main influential factors, such as electrolyte feature, applied potential, and catalyst structure. Then, the recent advancements in catalyst design for eNBRR are comprehensively summarized, particularly about the impacts of chemical composition, morphology, and crystal facets on regulating the local microenvironment, electron and mass transport for boosting catalytic performance. Finally, the future research of eNBRR is also proposed from the perspectives of performance enhancement, expansion of product scope, in-depth understanding of the reaction mechanism, and acceleration of the industrialization process through the integration of upstream and downstream technologies.

Highly Selective Electroreduction of Nitrobenzene to Aniline by Co-Doped 1T-MoS2

The selective electrocatalytic reduction of nitrobenzene (NB) to aniline demands a desirable cathodic catalyst to overcome the challenges of the competing hydrogen evolution reaction (HER), a higher overpotential, and a lower selectivity. Here, we deposit Co-doped 1T MoS2 on Ti mesh by the solvothermal method with different doping percentages of Co as x % Co-MoS2 (where x = 3, 5, 8, 10, and 12%). Because of the lowest overpotential, lower charge-transfer resistance, strong suppression of the competing HER, and higher electrochemical surface area, 8% Co-MoS2 achieves 94% selectivity of aniline with 54% faradaic efficiency. The reduction process follows first-order dynamics with a reaction coefficient of 0.5 h-1. Besides, 8% Co-MoS2 is highly stable and retains 81% selectivity even after 8 cycles. Mechanistic studies showed that the selective and exothermic adsorption of the nitro group at x % Co-MoS2 leads to a higher rate of NB reduction and higher selectivity of aniline. The aniline product is successfully removed from the solution by polymerization at FTO. This study signifies the impact of doping metal atoms in tuning the electronic arrangement of 1T-MoS2 for the facilitation of organic transformations.

Asymmetric Activation of the Nitro Group over a Ag/Graphene Heterointerface to Boost Highly Selective Electrocatalytic Reduction of Nitrobenzene

The electrocatalytic reduction of nitrobenzene to aniline normally faces high overpotential and poor selectivity because of its six-electron redox nature. Herein, a Ag nanoparticles/laser-induced-graphene (LIG) heterointerface was fabricated on polyimide films and employed as an electrode material for an efficient nitrobenzene reduction reaction (NBRR) via a one-step laser direct writing technology. The first-principles calculations reveal that Ag/LIG shows the lowest activation barriers for the NBRR, which could be attributed to the optimum adsorption of the H atom realized by the appropriate interaction between Ag/LIG heterointerfaces and nitrobenzene. As a result, the overpotential of the NBRR is reduced by 217 mV after silver loading, and Ag/LIG shows a high aniline selectivity of 93%. Furthermore, an electrochemical reduction of nitrobenzene in tandem with an electrochemical oxidative polymerization of aniline was designed to serve as an alternative method to remove nitrobenzene from the aqueous solution. This strategy highlights the significance of heterointerfaces for efficient electrocatalysts, which may stimulate the development of novel electrocatalysts to boost the electrocatalytic activity.

Au Nanoparticles Supported by Porous Aromatic Frameworks—Efficient and Recyclable Catalysts for Nitro Reduction

A strategy has been developed for the preparation of gold nanoparticles (Au NPs) supported by porous aromatic frameworks (Au@PAF-184, Au@PAF-185) with high Au NPs loading, good stability and excellent activity. This approach contains two steps: the first step is ion exchange between cationic porous aromatic frameworks with NaAuCl4, fixing AuCl4− by the electrostatic interaction between anions and cations; the second step is reduction with NaBH4. Au@PAF-184 and Au@PAF-185 were successfully prepared accordingly. In comparison with the previously prepared similar types of materials such as Au@PAF-93 (2.86 wt% Au loading) and Au@PAF-94 (4.69 wt% Au loading) prepared by coordination and reduction, etc., the loading of Au NPs of Au@PAF-184 (24.2 wt% Au loading) and Au@PAF-185 (34.9 wt% Au loading) has increased by about 8 times. When employed as catalysts for nitrobenzene reduction, both Au@PAF-184 and Au@PAF-185 exhibited high catalytic activity and excellent reusability.

Facile synthesis of nitrogen-doped porous carbon materials using waste biomass for energy storage applications

A simple, low-cost, and green route for the preparation of lotus carbon (LC) materials using lotus parts including leaves, flowers, fruits (seed pods), and stems as a renewable precursor is reported. Different porous carbons, leaf-carbon (LF-carbon), flower-carbon (FL-carbon), fruit-carbon (FR-carbon), and stem-carbon (ST-carbon) were synthesized from different parts of the lotus plant by simple carbonization method. The as-synthesized LC materials were well-characterized by many techniques such as electron microscopy and spectroscopy techniques, X-ray diffraction, and BET-surface area analysis. These techniques confirmed the porous structure of LC materials and the existence of heteroatoms in the prepared LC materials. The mesoporous structure of LC materials suggested employing it for the supercapacitor applications. The obtained FR-Carbon exhibits a high specific capacitance of 160 F/g in a three-electrode system in an aqueous 1 M H₂SO₄ electrolyte with a high rate performance of 52% retention from 0.5 to 5.0 A/g with good cycling stability of 95%. These results indicate that the porous carbon derived from lotus fruits is a potential electrode material for high-performance supercapacitors.

Micro/macrostructure and multicomponent design of catalysts by MOF-derived strategy: Opportunities for the application of nanomaterials-based advanced oxidation processes in wastewater treatment

Advanced oxidation processes (AOPs) have demonstrated an effective wastewater treatment method. But the application of AOPs using nanomaterials as catalysts is challenged with a series of problems, including limited mass transfer, surface fouling, poor stability, and difficult recycling. Recently, metal-organic frameworks (MOFs) with high tunability and ultrahigh porosity are emerging as excellent precursors for the delicate design of the structure/composition of catalysts and many MOF-derived catalysts with distinct physicochemical characteristics have shown optimized performance in various AOPs. Herein, to elucidate the structure-composition-performance relationship, a review on the performance optimization of MOF-derived catalysts to overcome the existing problems in AOPs by micro/macrostructure and multicomponent design is given. Impressively, MOF-derived strategy for the design of catalyst materials from the aspects of microstructure, macrostructure, and multicomponent (polymetallic, heteroatom doping, M/C hybrids, etc.) is firstly presented. Moreover, important advances of MOF-derived catalysts in the application of various AOPs (Fenton, persulfate-based AOPs, photocatalysis, electrochemical processes, hybrid AOPs) are summarized. The relationship between the unique micro/macrostructure and/or multicomponent features and performance optimization in mass transfer, catalytic efficiency, stability, and recyclability is clarified. Furthermore, the challenges and future work directions for the practical application of MOF-derived catalysts in AOPs for wastewater treatment are provided.

Review on UV/sulfite process for water and wastewater treatments in the presence or absence of O2

Based on previous reports, UV/sulfite process is generally used as an advanced reduction process (ARP) since e_aq^- and/or ∙H, both with strong reduction potential, could be substantially generated herein. Very recently, the combination of UV and sulfite as an advanced oxidation process (AOP) or an oxidation-reduction coupling process has attracted increasing interest due to the yield of SO₄^∙- and/or HO∙. Herein, the application of UV/sulfite as an ARP and AOP (or oxidation-reduction coupling process) during water and wastewater treatments is reviewed respectively. (1) In the absence of O₂, UV/sulfite works as an ARP. The generation mechanism of reactive reduction species and various contaminants removal (including degradation kinetics and efficiency, decomposition mechanisms, effects of some factors, etc.) is summarized in detail and systematically. Moreover, both the application of different types of UV lights and the economic evaluation are summarized systematically. (2) In the presence of O₂, UV/sulfite could be used as an AOP or oxidation-reduction coupling process. The generation mechanism of reactive oxidation species and influencing factors is also presented in detail. Moreover, two ways (including homogeneous and heterogeneous activation) used to enhance the UV/sulfite oxidation potential are summarized respectively. Moreover, several knowledge gaps and research needs for further research are proposed. Overall, this review provides an overview for in-depth understanding of UV/sulfite as an ARP or AOP (oxidation-reduction coupling process) during water and wastewater treatments.

An ultra-sensitive electrochemical sensor of Ni/Fe-LDH toward nitrobenzene with the assistance of surface functionalization engineering

Hypersensitive detection of organic pollutions with high toxicity in drinking water always keeps its challenge in electroanalysis due to their low concentration and electrochemical redox inert. In this work, a novel nanomaterial modified electrode for the sensitive detection of nitrobenzene (NB) is presented, based on environmental friendly and cost-effective Ni/Fe layered double hydroxides functionalized with sodium dodecyl sulfate (Ni/Fe(SDS)-LDH). Such 2D layered composites were prepared and used to improve the sensitivity for NB detection, due to its good catalytic activity for NB reduction. Besides, the proposed electrode shows a remarkably promoted sensitivity to NB compared to Ni/Fe-LDHs modified one. It is because that the surface modifier SDS can provide more adsorption sites to significantly improve the adsorption of NB, which has been confirmed by the adsorption experiment and the characterization of Fourier transform infrared spectroscopy (FTIR). As a result, an impressive sensing behaviour is achieved at the proposed Ni/Fe(SDS)-LDHs modified electrode with a sensitivity of 15.79 μA μM^-1 cm^-2. This work provides a promising way to build more advanced nanomaterials to electrochemical detection of organic pollution based on energetically synergizing of adsorption by surface functionalization engineering.

Progress and perspectives of electrochemical insights for C–H and N–H sulfonylation

A comprehensive electrosulfonylation study has been carried out via cathodic and anodic approaches for the production of organosulfone and sulfonamide derivatives.

Coating silver metal-organic frameworks onto nitrogen-doped porous carbons for the electrochemical sensing of cysteine

Nitrogen-doped porous carbons (N-PC) were coated for the first time with silver metal-organic frameworks (Ag-MOF) by the hydrothermal route. The resulted N-PC@Ag-MOF composites present high stability because of the strong interaction between N atoms of N-PC and Ag⁺ ions of Ag-MOF. It was discovered that the electrodes modified with N-PC@Ag-MOF composites display much higher conductivity than the one modified with Ag-MOF. Especially, they provide stable and sharp electrochemical signals of solid-state AgBr at a low potential approaching zero (i.e., 0.02 V), which may aid to overcome the drawback of the traditional electroanalysis at high overpotentials with serious interferences from the samples background. More importantly, the yielded AgBr signals selectively decrease induced by cysteine (Cys) through the specific thiol-bromine replacement reactions that transfer AgBr into non-electroactive Ag-Cys. The proposed method facilitates the selective detection of Cys with two linear working ranges of 0.10 to 100 μM and 100 to 1300 μM, respectively. The N-PC@Ag-MOF-based sensors have been used for detection of spiked Cys in milk samples with good recovery efficiencies. The developed electroanalysis strategy for probing Cys through the specific thiol-bromine replacement has potential applications in the food analysis fields. Ag-MOF was coated onto heteroatoms co-doped porous carbons carriers for the selective electroanalysis strategy for cysteine at the potential approaching zero using Br^- ions.

PtN3-Embedded graphene as an efficient catalyst for electrochemical reduction of nitrobenzene to aniline: a theoretical study

PtN₃ moiety embedded into graphene can be utilized as a promising electrocatalyst for the reduction of nitrobenzene to amine due to its ultra-low limiting potential of (–0.21 V).