The practical utility of the synthesis FeNi3@SiO2@TiO2 magnetic nanoparticles as an efficient photocatalyst for the humic acid degradation

Bi2Fe4O9/rGO nanocomposite with visible light photocatalytic performance for tetracycline degradation

Bismuth-iron semiconductor materials have been widely studied in the photocatalytic field due to their excellent light responsiveness. Among them, the potential and mechanism regarding photocatalytic degradation of organic pollutants by Bi2Fe4O9 are seriously ignored. In this research, Bi2Fe4O9/reduced graphene oxide (BFO/rGO) was successfully synthesized for tetracycline (TC) removal. Under visible light irradiation, the TC degradation efficiency reached 83.73% within 60 min, which was much higher than that of pure BFO or rGO. The impacts of crucial factors (TC initial concentration, humic acid concentration, pH value and inorganic anions) were systematically analyzed. The photoelectric performance experiments indicated that the addition of rGO decreased the electron-hole pair recombination efficiency and improved the charge transfer efficiency, thus significantly enhancing the photocatalytic performance. According to quenching experiments and EPR (Electron Paramagnetic Resonance) analysis, superoxide radical (•O2-) and hole (h+) were determined as the main active species during degradation reactions. Eventually, the possible degradation routes of TC were presented by identifying intermediates.

Statistical computational optimization approach for photocatalytic-ozonation decontamination of metronidazole in aqueous media using CuFe2O4/SiO2/ZnO nanocomposite

The increasing use of pharmaceuticals and the ongoing release of drug residues into the environment have resulted in significant threats to environmental sustainability and water safety. In this sense, developing a robust and easy-recovered magnetic nanocomposite with eminent photocatalytic activity is very imperative for detoxifying pharmaceutical compounds. Herein, a systematic study was conducted to investigate the photocatalytic ozonation for eliminating metronidazole (MET) from aqueous media utilizing the CuFe2O4/SiO2/ZnO heterojunction under simulated sunlight irradiation. The composite material was fabricated by a facile hydrothermal method and diagnosed by multiple advanced analytical techniques. Modelling and optimization of MET decontamination by adopting the central composite design (CCD) revealed that 90 % of MET decontamination can be achieved within 120 min of operating time at the optimized circumstance (photocatalyst dose: 1.17 g/L, MET dose: 33.20 mg/L, ozone concentration: 3.99 mg/min and pH: 8.99). In an attempt to scrutinize the practical application of the CuFe2O4/SiO2/ZnO/xenon/O3 system, roughly 56.18% TOC and 73% COD were removed under the optimized operational circumstances during 120 min of degradation time. According to the radical quenching experiments, hydroxyl radicals (HO•) were the major oxidative species responsible for the elimination of MET. The MET degradation rate maintained at 83% after seven consecutive runs, manifesting the efficiency of CuFe2O4/SiO2/ZnO material in the MET removal. Ultimately, the photocatalytic ozonation mechanism over the CuFe2O4/SiO2/ZnO heterojunction of the fabricated nanocomposites was rationally proposed for MET elimination. In extension, the results drawn in this work indicate that integrating photocatalyst and ozonation processes by the CuFe2O4/SiO2/ZnO material can be applied as an efficient and promising method to eliminate tenacious and non-biodegradable contaminants from aqueous environments.

The utility of ultraviolet beam in advanced oxidation-reduction processes: a review on the mechanism of processes and possible production free radicals

Advanced oxidation processes (AOPs) and advanced reduction processes (ARPs) are a set of chemical treatment procedures designed to eliminate organic (sometimes inorganic) contamination in water and wastewater by producing free reactive radicals (FRR). UV irradiation is one of the factors that are effectively used in oxidation-reduction processes. Not only does the UV beam cause the photolysis of contamination, but it also leads to the product of FRR by affecting oxidants-reductant, and the pollutant decomposition occurs by FRR. UV rays produce active radical species indirectly in an advanced redox process by affecting an oxidant (O3, H2O2), persulfate (PS), or reducer (dithionite, sulfite, sulfide, iodide, ferrous). Produced FRR with high redox potential (including oxidized or reduced radicals) causes detoxification and degradation of target contaminants by attacking them. In this review, it was found that ultraviolet radiation is one of the important and practical parameters in redox processes, which can be used to control a wide range of impurities.

A systematic review of photocatalytic degradation of humic acid in aqueous solution using nanoparticles

OBJECTIVES

Humic acid (HA) compounds in the disinfection processes of drinking water and wastewater are considered as precursors of highly toxic, carcinogenic and mutagenic disinfectant by-products. The aim of this study was to systematically review all research studies on the photocatalytic degradation of humic acid and to evaluate the laboratory conditions and results of these studies.

CONTENT

The present systematic review was performed by searching the Scopus, PubMed, and web of science databases until December 2021. The parameters of type of catalyst, catalyst size, optimum pH, optimum initial concentration of humic Acid, optimum catalyst concentration, optimum time, light used and removal efficiency were investigated.

SUMMARY

395 studies were screened and using the inclusion and exclusion criteria, in total, 20 studies met our inclusion criteria and provided the information necessary to Photocatalytic degradation of humic acid by nanoparticles. In the investigated studies, the percentage of photocatalytic degradation of humic acid by nanoparticles was reported to be above 70%, and in some studies, the removal efficiency had reached 100%.

OUTLOOK

From the results of this systematic review, it was concluded that the photocatalytic process using nanoparticles has a high effect on the degradation of humic acid.

Efficiency of Ag3PO4/TiO2 as a heterogeneous catalyst under solar and visible light for humic acid removal from aqueous solution

Nowadays, the presence of humic acid (HA) in water sources is highly regarded due to the production of extremely harmful byproducts such as trihalomethanes. In this study, the effectiveness of an Ag₃PO₄/TiO₂ catalyst produced by in situ precipitation as a heterogeneous catalyst for the degradation of humic acid in the existence of visible and solar light was evaluated. The Ag₃PO₄/TiO₂ catalyst's structure was characterized using X-ray powder diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS), after which the catalyst dosage, HA concentration, and pH parameters were adjusted. After a 20-min reaction, the highest HA degradation of 88.2% and 85.9% in presence of solar light and visible light were attained at the ideal operating conditions of 0.2 g/L catalyst, 5 mg/L HA, and pH 3, respectively. It was discovered that, based on kinetic models, the degradation of HA matched both Langmuir-Hinshelwood and pseudo-first-order kinetics at concentrations of 5 to 30 mg/L (R² > 0.8). The Langmuir-Hinshelwood model had surface reaction rate constants (K_c) of 0.729 mg/L.min and adsorption equilibrium constants (K_L-H) of 0.036 L/mg. Eventually, a real-water investigation into the process' effectiveness revealed that, under ideal circumstances, the catalyst had a reasonable HA removal efficiency of 56%.

A comprehensive appraisal on status and management of remediation of DBPs by TiO2 based-photocatalysts: Insights of technology, performance and energy efficiency

Disinfection has been acknowledged as an inevitable technique in water treatment. However, an inadvertent consequence of generation of carcinogenic and mutagenic disinfection byproducts (DBPs) is associated with the reaction of disinfectants and natural organic matter (NOM) present in water. More than 700 DBPs have been identified in drinking water. The conventional processes carried out in WTPs do not optimally ensure NOM elimination, which evokes the need for the incorporation of other processes. In this context, several physicochemical and advanced oxidation processes (AOP), such as adsorption, membrane techniques, photocatalysis, etc., have been studied for the removal of NOM from water. Photocatalysis using semiconductors has been one of the most proficient technologies, which utilizes light energy for the degradation of recalcitrant organics. The present study aims to provide a comprehensive appraisal on the performance of titanium dioxide (TiO₂) based photocatalysts in the remediation of DBPs concerning the efficacy and energy requirements of the system. Furthermore, the effect of process parameters, such as pH, catalyst dose, light intensity, etc. on the efficacy of the process was also studied. It was observed that conventional P25-TiO₂ powders were efficient in the degradation of dissolved organic carbon (DOC) (up to 90%). However, low photocatalytic activity under visible light activation is one of its significant downsides. Several modifications on the catalyst surface in many studies exhibited advantages, such as high humic acid (HA) degradation under visible light. Furthermore, doped TiO₂ catalysts have shown high total organic carbon (TOC) degradation. The photocatalytic systems have achieved a better decrease in trihalomethane formation potential (THMFP) when compared to haloacetic acid formation potential (HAAFP). The energy requirements of the photocatalytic systems are determined by electrical energy per order (EE/O), which has been observed to be lesser for doped TiO₂ and engineered TiO₂ catalysts when compared with P25-TiO₂ powders. Carbon, iron, silver, etc., based catalysts can be a promising alternative to TiO₂-based photocatalysts for the degradation of NOM, although further research is required in this direction. The present review provides critical highlights on the uses, opportunities, and challenges of TiO₂-based photocatalytic techniques for the management of DBPs and their precursors pertaining to an emerging area of water treatment.

Biosynthesis of MnFe2O4@TiO2 magnetic nanocomposite using oleaster tree bark for efficient photocatalytic degradation of humic acid in aqueous solutions

The presence of humic acid compounds in water resources, as one of the precursors of Trihalomethanes and Holoacetic acids, causes health problems for many communities. The aim of this research study was to investigate the photocatalytic degradation efficiency of humic acid using MnFe₂O₄@TiO₂ nanoparticles which produced by green synthesis method. The synthesis of metal nanoparticles using plant extracts and the study of their catalytic performance is a relatively new topic. Many chemical techniques have been proposed for the synthesis of MnFe₂O₄@TiO₂ nanoparticles, but green synthesis has received much attention due to its availability, simplicity, and non-toxicity. The properties of synthesized nanoparticles were determined by SEM, FT-IR, XRD, EDS, and DLS analysis. The results of the study showed that under optimal experimental conditions (pH = 3, nanocomposite dose = 0.03 g/L, humic acid initial concentration = 2 mg/L, and contact time = 20 min), it is possible to achieve maximum degradation of humic acid. Therefore; MnFe₂O₄@TiO₂ nanoparticles have high efficiency for removing of humic acid from aqueous solutions under UV light.

Simple Quaternary Templating Systems for Direct Synthesis of Unique SBA-15 Mesopore Frameworks Embedded with High-Content TiO2 Nanoparticles as High-Performance Photocatalysts

This work presents a simple P123-based quaternary templating system using titanyl sulfate (TS) as the TiO₂ precursor and self-contained sulfuric acid as the catalyst (TS/TEOS/P123/H₂O). A unique structural configuration of SBA-15-type mesopore frameworks embedded with high-content TiO₂ nanoparticles can be directly obtained. Even with a high TiO₂ content (29.1 wt %), well-defined mesostructures free of pore blocking can be secured. A new structural formation mechanism is unveiled: a self-assembly process between inorganic species and P123 micelles yields ordered mesostructures catalyzed by self-contained TS in the low-temperature step, while sol-gel reaction and crystallization of TS coincide with processes of mesostructural re-organization and partial evacuation of P123 from mesopores. The incorporation of high-content TiO₂ nanoparticles into mesopore frameworks mainly happens during the hydrothermal treatment step. Not surprisingly, thanks to well-defined mesostructures containing high-content accessible TiO₂ nanoparticles, such TiO₂/SBA-15 composites show high activity and good reusability in photodegrading Rhodamine B and humic acids and photoreducing highly toxic Cr⁶⁺ in water under UV irradiation.

A novel route to the synthesis of α-Fe2O3@C@SiO2/TiO2 nanocomposite from the metal-organic framework as a photocatalyst for water treatment

In this study, an attempt was made to synthesize metal-organic frameworks (MOFs) based magnetic iron particles as photocatalysts for textile dye wastewater. Improvement strategy was a novel two-step dry method without using conventional methods to eliminate the consumption of chemical reagents. First, the heterogeneous photocatalyst of Fe-MOFs derived magnetic carbon nanocomposite with carboxylic acid surface functional groups (Fe@C-COOH) was achieved. Next, the α-Fe₂O₃@C@SiO₂/TiO₂ was successfully synthesized followed by a sol-gel method to coat the SiO₂ shell and a solvothermal method to coat the surface of the intermediate TiO₂ particles. The as-synthesized nanocomposite materials were characterized and physicochemical analytical equipment. Further, the investigation on magnetic photocatalytic nanocomposite α-Fe₂O₃@C@SiO₂/TiO₂ performance of dye degradation and photocatalytic activity on Reactive yellow 145 (RY145), using as an indicator was conducted. The as-synthesized nanocomposite particles were characterized using X-ray powder diffraction (XRD), thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FT-IR), vibrating sample magnetometer (VSM), X-ray energy dispersive spectroscopy (EDX), and scanning electron microscopy (SEM) techniques. The structural characterization of the as-synthesized materials proved that these methods generate oxygen-containing functional groups, such as, -OH, -CO, and -COOH, which increases the polarity and hydrophilicity of the photocatalyst. The photocatalytic oxidation of RY145 dye under UVc light was discussed by the apparent first-order reaction rate and the kinetic model of the Langmuir-Hinshelwood followed a better fitting. The optimal performance of the composite is at pH = 2, 15 mg/100 mL of photocatalyst dose, 150 mg/L concentration of the dye RY145 at 25 °C temperature under UVc lamp irradiation for 90 min, and with the apparent reaction rate constant was 0.0165 min^-1. The thermodynamic analysis of activation parameters computed by the Eyring model and based on transition state theory (TST), an endothermic reaction with a positive value for Δ^‡H^o (50.16 kJ mol^-1) and a negative value for Δ^‡S^o (-153 J/mol K) both contribute toward achieving positive values for Δ^‡G^o and a nonspontaneous process. The proposed α-Fe₂O₃@C@SiO₂/TiO₂ demonstrated a high capability of photocatalytic degradation up to 97% after five successive cycles at the optimal condition compared to that of Fe₃O₄@C (18.74%) and Fe@C-COOH (77.9%) without reusability.

Copper cable doped with tin oxide and its application to photodegrade natural organic matters

Natural organic matters are of particular importance in drinking water treatment due to their reaction with chlorine, and formation of disinfection byproducts that cause cancer in humans. Photocatalysis can remove natural organic matters from water but usually powdery photocatalysts are used which should be separated from water by filtration due to their toxic effects. In this work, a piece of copper cable used in electric industries was doped with tin oxide and applied as a photocatalyst to remove natural organic matters, humic acid and humate liquid fertilizer, from water. Tin (II) chloride was used as precursor, and deposited on the copper cable by dip coating method. Then the coated cable was calcinated at 300 °C. The prepared SnO₂/CuO/Cu photocatalyst was characterized by ICP, SEM, DRS, XRD, and ASAP techniques. The results of XRD confirmed the existence of copper oxide, and tin oxides. DRS showed that doping with tin oxide caused the photocatalytic property to improve, and the catalyst was active under irradiation of UV-Vis light. Effects of humic acid concentration, photocatalyst length, and time were studied. The kinetic of humic acid photodegradation by the SnO₂/CuO/Cu photocatalyst was investigated, which obeyed the first order model. The photocatalyst regeneration and reuse were investigated in five cycles, and the results indicated that photocatalytic activity was remained nearly constant. The cable form SnO₂/CuO/Cu photocatalyst with the main advantage of easy separation from water without the need to filtration, has excellent photocatalytic activity.

Recent advancements of g-C3N4-based magnetic photocatalysts towards the degradation of organic pollutants: a review

Heterogeneous photocatalysis premised on advanced oxidation processes has witnessed a broad application perspective, including water purification and environmental remediation. In particular, the graphitic carbon nitride (g-C₃N₄), an earth-abundant metal-free conjugated polymer, has acquired extensive application scope and interdisciplinary consideration owing to its outstanding structural and physicochemical properties. However, several issues such as the high recombination rate of the photo-generated electron-hole pairs, smaller specific surface area, and lower electrical conductivity curtail the catalytic efficacy of bulk g-C₃N₄. Another challenging task is separating the catalyst from the reaction medium, limiting their reusability and practical applications. Therefore, several methodologies are adopted strategically to tackle these issues. Attention is being paid, especially to the magnetic nanocomposites (NCs) based catalysts to enhance efficiency and proficient reusability property. This review summarizes the latest progress related to the design and development of magnetic g-C₃N₄-based NCs and their utilization in photocatalytic systems. The usefulness of the semiconductor heterojunctions on the catalytic activity, working mechanism, and degradation of pollutants are discussed in detail. The major challenges and prospects of using magnetic g-C₃N₄-based NCs for photocatalytic applications are highlighted in this report.

Adsorption-photocatalytic processes for removal of pentachlorophenol contaminant using FeNi3/SiO2/ZnO magnetic nanocomposite under simulated solar light irradiation

The adsorption followed by photocatalytic degradation process was examined for the pentachlorophenol (PCP) removal from aqueous solution. These processes were accomplished by using FeNi₃/SiO₂/ZnO magnetic nanocomposite as an adsorbent-photocatalytic agent and under the irradiation of solar light. The magnetic nanocomposite used was first synthesized and then was characterized using transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), vibrating-sample magnetometer (VSM), and X-ray diffraction (XRD) spectroscopy. The PCP removal efficiency was tested for various factors, including pH, PCP concentration, and nanocomposite dose at different contact times. The characterization results of TEM, FE-SEM, and VSM analysis showed that the synthesized nanoparticles are amorphous and tend to agglomerate due to their high super-paramagnetic property. In addition, the EDX technique showed that the Zn and O elements had the highest weight percent in the synthesized nanocomposite, respectively. On the other hand, XRD analysis revealed that the crystalline size of the nanoparticles was about 42 nm. The kinetic of PCP degradation followed the pseudo-first-order model with R² = 0.978. According to the results of the isotherm study, the adsorption of PCP onto the nanoparticles followed the Freundlich model. The results of adsorption-photocatalytic degradation experiments showed that 100% removal of PCP was obtained at optimum conditions of pH = 3, nanocomposite dose = 0.5 g/L, contact time = 180 min, and initial PCP concentration of 10 mg/L. Through the results obtained from this study, the adsorption process followed by solar light photocatalytic degradation process using FeNi₃/SiO₂/ZnO magnetic nanocomposite is found to be an efficacious treatment method for the removal of PCP contaminant from water and wastewater.

Recent Advances in Magnetic Nanoparticles and Nanocomposites for the Remediation of Water Resources

Water resources are of extreme importance for both human society and the environment. However, human activity has increasingly resulted in the contamination of these resources with a wide range of materials that can prevent their use. Nanomaterials provide a possible means to reduce this contamination, but their removal from water after use may be difficult. The addition of a magnetic character to nanomaterials makes their retrieval after use much easier. The following review comprises a short survey of the most recent reports in this field. It comprises five sections, an introduction into the theme, reports on single magnetic nanoparticles, magnetic nanocomposites containing two of more nanomaterials, magnetic nanocomposites containing material of a biologic origin and finally, observations about the reported research with a view to future developments. This review should provide a snapshot of developments in what is a vibrant and fast-moving area of research.

Photocatalysis Meets Magnetism: Designing Magnetically Recoverable Supports for Visible-Light Photocatalysis

While magnetic supports have been widely used to immobilize homogeneous catalysts in organic chemistry, this strategy has so far found very little application in photocatalysis. Indeed, magnetic supports are dark colored, and thus compete for photon absorption with photocatalysts themselves. We have developed a series of core-shell Fe(0)-silica nanoparticles as supports for immobilizing the photosensitizer Ru(bpy)₃²⁺, featuring various silica shell thicknesses-16-34 nm SiO₂-on 9 nm Fe cores. The supports and the resulting photocatalytic systems were studied for their magnetic, optical, and catalytic properties in the context of the photooxidation of citronellol, and we found that thicker silica shells lead to higher catalytic activity. We correlated this effect as well as Ru(bpy)₃²⁺ fluorescence and singlet oxygen generation to the absorption properties of the supports. We were able to reuse our optimal system three times with minimal loss of activity and achieved turnover numbers largely surpassing the performance of homogeneous Ru(bpy)₃²⁺. This work highlights the role of material design in the conception of new supports for applications in heterogeneous photocatalysis.

Study of Humic Acid Adsorption Character on Natural Maifan Stone: Characterization, Kinetics, Adsorption Isotherm, and Thermodynamics

In this paper, the adsorption of humic acid (HA) on natural maifan stone (MS) in aqueous medium was investigated. The changes in MS after adsorption have been characterized explicitly. The adsorption behavior was studied by varying the factors of pH (5-10), reaction time (10-180 min), initial HA concentration (5-50 mg/L), adsorbent dosage (0.1-1.2 g), and temperature (25-45 °C). The kinetics of the adsorption process of HA was fitted well with the pseudo-second-order model (R ² = 0.99). The isothermal results revealed that the adsorption process is favorable, and highly fitting Langmuir models (R ² > 0.99) were used. Additionally, the obtained maximum adsorption capacity of MS for HA was approximately 1 mg/g. The adsorption process of HA onto MS was endothermic according to the thermodynamic study. The changes in the excitation-emission-matrix of HA and the X-ray diffraction of MS after adsorption indicate the interaction of HA and MS. However, the reason for these changes is still unclear. Thus, the results show that the natural MS exhibited a certain adsorption capacity for HA. It is promising to develop novel natural MS-based materials for adsorption of HA.