Graphene oxide-induced formation of a boron-doped iron oxide shell on the surface of NZVI for enhancing nitrate removal

Modulation of charge structure in Bi/Bi2O3-In2O3@C for efficient CO2 electroreduction to formate

Electrocatalytic CO2 reduction reaction (ECO2RR) to value-added chemicals is of significant importance to control CO2 emission and reach carbon neutrality. Herein, Bi/Bi2O3-In2O3@C electrocatalyst with nanosheet arrays is successfully fabricated by a facile solvothermal with subsequent calcination process. It is found that the electron structure of Bi/Bi2O3-In2O3@C can be adjusted by the synergistic effects of Bi-In hetero-diatoms, which can significantly enhance its inherent catalytic activity. As expected, it requires a maximum HCOOH faradaic efficiency (FEHCOOH) of 97.6 % at -1.1 V vs. Reversible Hydrogen Electrode (RHE), which further delivers over 90 % at a wide potential range of -0.8 to -1.4 V vs. RHE, and exhibits high stability of 90.1 % over 60-h long-term test. In-situ Raman analysis is performed to explore the mechanism of its excellent stability. Meanwhile, in-situ attenuated total reflection-Fourier-transform infrared (ATR-FTIR) analysis combined with theoretical calculations reveal that the hetero-bridging absorption of *OCHO and d-d orbital coupling effect can regulate d-band center of Bi/Bi2O3-In2O3@C and improve its density of states around Ef, moderating free energy of intermediates, thereby the improved formate production performance can be seen.

Environmental remediation approaches by nanoscale zero valent iron (nZVI) based on its reductivity: a review

The fast rise of organic and metallic pollution has brought significant risks to human health and the ecological environment. Consequently, the remediation of wastewater is in extremely urgent demand and has received increasing attention. Nanoscale zero valent iron (nZVI) possesses a high specific surface area and distinctive reactive interfaces, which offer plentiful active sites for the reduction, oxidation, and adsorption of contaminants. Given these abundant functionalities of nZVI, it has undergone significant and extensive studies on environmental remediation, linking to various mechanisms, such as reduction, oxidation, surface complexation, and coprecipitation, which have shown great promise for application in wastewater treatment. Among these functionalities of nZVI, reductivity is particularly important and widely adopted in dehalogenation, and reduction of nitrate, nitro compounds, and metal ions. The following review comprises a short survey of the most recent reports on the applications of nZVI based on its reductivity. It contains five sections, an introduction to the theme, chemical reduction applications, electrolysis-assisted reduction applications, bacterium-assisted reduction applications, and conclusions about the reported research with perspectives for future developments. Review and elaboration of the recent reductivity-dependent applications of nZVI may not only facilitate the development of more effective and sustainable nZVI materials and the protocols for comprehensive utilization of nZVI, but may also promote the exploration of innovative remediation approaches based on its reductivity.

Improvement strategy of citrate and biochar assisted nano-palladium/iron composite for effective dechlorination of 2,4-dichlorophenol

Rapid passivation and aggregation of nanoscale zero-valent iron (nZVI) seriously limit its performance in the remediation of different contaminants from wastewater. To overcome such issues, in the present study, nano-palladium/iron (nPd/Fe) was simultaneously improved by biochar (BC) prepared from discarded peanut shells and green complexing agent sodium citrate (SC). For this purpose, a composite (SC-nPd/Fe@BC) was successfully synthesized to remove 2,4-dichlorophenol (2,4-DCP) from wastewater. In the SC-nPd/Fe@BC, BC acts as a carrier with dispersed nPd/Fe particles to effectively prevent its agglomeration, and increased the specific surface area of the composite, thereby improving the reactivity and stability of nPd/Fe. Characterization results demonstrated that the SC-nPd/Fe@BC composites were well dispersed, and the agglomeration was weakened. The formation of the passivation layer on the surface of the particles was inhibited, and the mechanism of SC and BC improving the reactivity of nPd/Fe was clarified. Different factors were found to influence the reductive dichlorination of 2,4-DCP, including Pd loading, Fe:C, SC addition, temperature, initial pH, and initial pollutant concentration. The dechlorination results revealed that the synergistic effect of the BC and SC made the removal efficiency and dechlorination rate of 2,4-DCP by SC-nPd/Fe@BC reached to 96.0 and 95.6%, respectively, which was better than that of nPd/Fe (removal: 46.2%, dechlorination: 45.3%). Kinetic studies explained that the dechlorination reaction of 2,4-DCP and the data were better represented by the pseudo-first-order kinetic model. The reaction rate constants followed the order of SC-nPd/Fe@BC (0.0264 min-1) > nPd/Fe@BC (0.0089 min-1) > SC-nPd/Fe (0.0081 min-1) > nPd/Fe (0.0043 min-1). Thus, SC-nPd/Fe@BC was capable of efficiently reducing 2,4-DCP and the dechlorination efficiency of BC and SC synergistically assisted composite on 2,4-DCP was much better than that of SC-nPd/Fe, nPd/Fe@BC and nPd/Fe. Findings suggested that SC-nPd/Fe@BC can be promising for efficient treatment of chlorinated pollutants.

Efficient Remediation of p-chloroaniline Contaminated Soil by Activated Persulfate Using Ball Milling Nanosized Zero Valent Iron/Biochar Composite: Performance and Mechanisms

In this study, efficient remediation of p-chloroaniline (PCA)-contaminated soil by activated persulfate (PS) using nanosized zero-valent iron/biochar (B-nZVI/BC) through the ball milling method was conducted. Under the conditions of 4.8 g kg^-1 B-nZVI/BC and 42.0 mmol L^-1 PS with pH 7.49, the concentration of PCA in soil was dramatically decreased from 3.64 mg kg^-1 to 1.33 mg kg^-1, which was much lower than the remediation target value of 1.96 mg kg^-1. Further increasing B-nZVI/BC dosage and PS concentration to 14.4 g kg^-1 and 126.0 mmol L^-1, the concentration of PCA was as low as 0.15 mg kg^-1, corresponding to a degradation efficiency of 95.9%. Electron paramagnetic resonance (EPR) signals indicated SO₄•^-, •OH, and O₂•^- radicals were generated and accounted for PCA degradation with the effect of low-valence iron and through the electron transfer process of the sp² hybridized carbon structure of biochar. 1-chlorobutane and glycine were formed and subsequently decomposed into butanol, butyric acid, ethylene glycol, and glycolic acid, and the degradation pathway of PCA in the B-nZVI/BC-PS system was proposed accordingly. The findings provide a significant implication for cost-effective and environmentally friendly remediation of PCA-contaminated soil using a facile ball milling preparation of B-nZVI/BC and PS.

Phosphorous- and Boron-Doped Graphene-Based Nanomaterials for Energy-Related Applications

Doping is a great strategy for tuning the characteristics of graphene-based nanomaterials. Phosphorous has a higher electronegativity as compared to carbon, whereas boron can induce p-type conductivity in graphene. This review provides insight into the different synthesis routes of phosphorous- and boron-doped graphene along with their applications in supercapacitors, lithium- ions batteries, and cells such as solar and fuel cells. The two major approaches for the synthesis, viz. direct and post-treatment methods, are discussed in detail. The former synthetic strategies include ball milling and chemical vapor discharge approaches, whereas self-assembly, thermal annealing, arc-discharge, wet chemical, and electrochemical erosion are representative post-treatment methods. The latter techniques keep the original graphene structure via more surface doping than substitutional doping. As a result, it is possible to preserve the features of the graphene while offering a straightforward handling technique that is more stable and controllable than direct techniques. This review also explains the latest progress in the prospective uses of graphene doped with phosphorous and boron for electronic devices, i.e., fuel and solar cells, supercapacitors, and batteries. Their novel energy-related applications will continue to be a promising area of study.

Efficient and reductive removal of bromate using a novel and stable nanoscale zero-valent iron embedded in N-doped carbon derived from metal-organic frameworks

Nanoscale zero-valent iron (nZVI) has drawn great interest in the remediation of contaminated waters. In this study, we prepared a novel and stable nZVI embedded in N-doped carbon matrix (nZVI@MOF-CN) using a facile direct carbonization method, in which an iron-containing metal-organic framework (MOF) served as both the iron and carbon sources, and melamine as the nitrogen source. The nZVI@MOF-CN composites were used in the removal of bromate in water, which could be effectively reduced by the surface electrons transferred from nZVI to the carbon encapsulation layer due to the Schottky-Mott effect. Doped nitrogen significantly facilitated the reduction of bromate by nZVI, because it enhanced the nZVI dispersion and bromate adsorption, and modulated the carbon matrix conductivity. The bromate reduction activity of nZVI@MOF-CN was more than 50 times higher that of its un-doped counterpart and a commercial nZVI. Moreover, owing to the protection of carbon encapsulation layer, nZVI@MOF-CN exhibited good stability and reusability. The leached concentration of iron ions of nZVI@MOF-CN was less than 5% of the commercial nZVI under the same reaction conditions. Commercial nZVI almost completely lost its bromate reduction activity after use (3% reduction efficiency in the examined time frame), while nZVI@MOF-CN maintained a reduction efficiency of 61%. The nZVI@MOF-CN could be effectively regenerated by hydrogenation reduction. After five reaction-regeneration cycles, nZVI@MOF-CN still achieved a bromate reduction efficiency of approximately 80%. These results suggest that MOF-derived nZVI materials are highly reactive and stable for the reductive removal of pollutants in water.

Iron-Based Nanocatalysts for Electrochemical Nitrate Reduction

Nitrate has a high level of stability and persistence in water, endangering human health and aquatic ecosystems. Due to its high reliability and efficiency, the electrochemical nitrate reduction reaction (NO₃ RR) is regarded as the best available option for mitigating excess nitrate in water and wastewater, especially for the removal of trace levels of nitrate. One of the most critical factors in the electrochemical reduction are the catalysts, which directly affect the reaction efficiency of nitrate removal. Iron-based nanocatalysts, which have the advantages of nontoxicity, wide availability, and low cost, have emerged as a promising electrochemical NO₃ RR material in recent years. This review covers major aspects of iron-based nanocatalysts for electrochemical NO₃ RR, including synthetic methods, structural design, performance enhancement, electrocatalytic nitrate reduction test, and reduction mechanism. The recent progress of iron-based nanocatalysts for electrochemical NO₃ RR and the mechanism of functional advantages for modified structures are reviewed from the perspectives of loading, doping, and assembly strategies, in order to realize the conversion from pollutant nitrate to harmless nitrogen or ammonia and other sustainable products. Finally, challenges and future directions for the development of low-cost and highly-efficient iron-based nanocatalysts are explored.

Enhanced selective nitrate-to-nitrogen reduction by aerosol-assisted iron-carbon composites: Insights into the key factors

In this study, an aerosol-assisted Fe⁰/C (carbon supported zero-valent iron) composite was prepared and evaluated, which could effectively remove nitrate and exhibit high nitrogen selectivity. The results show that the selectivity of nitrogen for freshly prepared Fe⁰/C composites could reach 52.2% when pH at 7, compared to that of 7.7% for traditional nZVI. Meanwhile, the removal efficiency of nitrate was slightly increased from 63.5% to 69.9%. Furthermore, a variety of methods such as SEM, TEM, XRD, XPS, BET, FTIR and TGA were used to characterize the Fe⁰/C composites before and after reaction. Hence, the following key factors were determined for the effective conversion from nitrate to nitrogen: the surface of zero valent iron particle should be protected from oxidation and its genuine characteristics are well retained; the reaction should be controlled under an anaerobic condition; and the carbon as the carrier to support iron particles is very important; lower initial pH favors nitrogen generation. Various materials including aged Fe⁰/C composites, Fe⁰/SiO₂ (SiO₂ supported zero-valent iron) composites and nZVI particles in the deoxygenated and oxygenated systems were assessed for comparison.

Green synthesis of modified polyethylene packing supported tea polyphenols-NZVI for nitrate removal from wastewater: Characterization and mechanisms

Nano-zero-valent iron (NZVI), as an electron donor, performed excellence in the reduction and remove of nitrate. However, the easy agglomeration and poor antioxidation of NZVI declined the nitrate removal and limited the application in the field of wastewater treatment. Herein, a novel composite packing of tea polyphenol, NZVI and modified polyethylene carrier (TP-NZVI/PE) was prepared and characterized, the removal efficiency of nitrate was verified, and the preliminary removal mechanism was finally investigated. The results showed that the maximum iron loading on TP-NZVI/PE composite achieved under 50 °C, pH of 5.0, 4.0 g/L of Fe²⁺, and 7.2 g/L of TP, respectively, with 3.51 ± 0.12 mg/g. NZVI presented satisfactory antioxidation and anti-agglomeration via TP encapsulation. TP encapsulation of TP-NZVI/PE composite was easily degraded by microorganisms and NZVI was exposed to nitrate during wastewater treatment, which made the reduction of nitrate possible. The nitrate removal efficiency of TP-NZVI/PE composite with microorganism was 79.88 ± 0.17%, higher three times than that of TP-NZVI/PE (25.54 ± 0.21%). The oxidized NZVI was transformed to Fe²⁺/Fe³⁺, which were prone to adsorb nitrate and then co-precipitate. It was favorable for further removal of nitrate. Results suggested a novel approach for fast and eco-friendly preparation and efficient application of NZVI.

Performances and mechanisms of microbial nitrate removal coupling sediment-based biochar and nanoscale zero-valent iron

Immobilized microorganism technology has attracted increasing attention for high concentration of microbes, low cell loss and high resistance to impact of environment. The microbial reduction of nitrate in the presence of sediment-based biochar (SBC) and nanoscale zero-valent iron (nZVI) was investigated in four different free systems. NZVI-SBC/bacteria system realized the best nitrate removal of 97.61% within 3 days through the synergistic effect of SBC and nZVI on denitrifying bacteria. Accumulation of nitrite and ammonium in nZVI-SBC/bacteria system also decreased. High-throughput sequencing results showed that the proportion of denitrifying bacteria in microbial community structure increased after adding nZVI-SBC. The performance of nitrate removal was then studied through PVA/SA-immobilization. Immobilized active pellets performed better nitrate removal (98.89%) and stronger tolerance under different conditions than the free bacterial cells. Overall, this study provided a promising approach by utilizing SBC and nZVI for the bio-remediation of nitrate-contaminated water in practical application.

Effective removal of Cd(Ⅱ) by sludge biochar supported nanoscale zero-valent iron from aqueous solution: Characterization, adsorption properties and mechanism

Nanoscale zero-valent iron (nZVI) has a high chemical reactivity for heavy metals, but nZVI forms aggregate easily. In this study, a synthesis of sludge biochar supported nanoscale zero-valent iron (nZVI@SBC) by...

Efficient Removal of 2,4-DCP by Nano Zero-Valent Iron-Reduced Graphene Oxide: Statistical Modeling and Process Optimization Using RSM-BBD Approach

In this study, nano zero-valent iron-reduced graphene oxide (NZVI-rGO) composites were synthesized to remove 2,4-dichlorophenol (2,4-DCP) as an efficient adsorbent. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) indicated that NZVI particles were successfully loaded and dispersed uniformly on rGO nanosheets. Fourier transform infrared spectroscopy (FTIR) analysis showed that the interaction between NZVI-rGO and 2,4-DCP promoted the adsorption process. A three-level, four-factor Box-Behnken design (BBD) of the response surface methodology (RSM) was used to optimize the influencing factors including NZVI-rGO dosage, 2,4-DCP initial concentration, reaction time and initial pH. A statistically significant, well-fitting quadratic regression model was successfully constructed to predict 2,4-DCP removal rate. The high $F$ value (15.95), very low $P$ value (<0.0001), nonsignificant lack of fit, and appropriate coefficient of determination ( $R^2=0.941$ ) demonstrate a good correlation between the experimental and predicted values of the proposed model. The analyses of variance reveal that NZVI-rGO dosage and reaction time have a positive effect on 2,4-DCP removal, whereas the increase of contaminant concentration and initial pH inhibit the removal, whereas the effect of contaminant concentration and initial pH is in reverse, where the change of NZVI-rGO dosage has the greatest effect. The optimum condition is1.215 g/L of NZVI-rGO dosage, 20.856 mg/L of 2,4-DCP concentration, 4.115 of pH, and 8.157 min of reaction time. It is verified by parallel experiments under the optimum condition, achieving the removal efficiency of100%.

Enhanced adsorption and reduction performance of nitrate by Fe-Pd-Fe3O4 embedded multi-walled carbon nanotubes

Multi walled carbon nanotubes (MWCNTs) have attracted more and more attention as adsorbents due to their excellent adsorption properties. By loading metal particles on MWCNTs, the chemical reduction ability of adsorbed pollutants could be provided, so as to achieve the purpose of adsorption and degradation of pollutants. Therefore, the removal process of NO₃^--N by Fe-Pd-Fe₃O₄/MWCNTs was studied, including rapid adsorption of initial pollutants, gradual reduction of intermediate products and re-adsorption of final products. The results showed that Fe-Pd-Fe₃O₄/MWCNTs completely removed NO₃^--N within 2 h, 39% and 25% of which were converted into NO₂^--N and NH₄⁺-N. The adsorption efficiency, kinetics, capacity and adsorption energy all followed the order of NH₄⁺-N > NO₂^--N > NO₃^--N. With the recoverability and reusability of Fe-Pd-Fe₃O₄/MWCNTs having been confirmed in 5 consecutive cycles, the removal rate of NO₃^--N still reached 43%. It has been shown that MWCNTs prolonged the reducing power for NO₃^--N, due to avoiding the aggregation of metal particles. The rapid adsorption of initial pollutants, effective stepwise reduction and convenient recovery processes were of great value for the rehabilitation of polluted water.

Nano zero valent iron encapsulated in graphene oxide for reducing uranium

Nano zero-valent iron (Fe⁰) has been widely used to remove Uranium (U(VI)). In order to enhance the performance of Fe⁰ toward U(VI) removal, the Fe⁰ was assembled into graphene oxide (GO) sheets via 3-aminopropyl triethoxysilane (APTES) as Fe⁰/APTES-GO composites. The Fe⁰/APTES-GO composites were triumphantly prepared, characterized and analyzed by means of Scanning Electron Microscope (SEM), Transmission Electron Microscope (TEM) together with Energy Dispersive Spectrometer (EDS), X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR) and X-ray Photoelectron Spectroscopy (XPS). SEM and TEM-EDS results manifested that Fe⁰ particles were encapsulated into rolled-up GO, which greatly improved the stability of Fe⁰. Batch experiment showed that only a small amount of Fe²⁺ was leached in the first two leaching cycles of Fe⁰/APTES-GO composites. The removal capacity of Fe⁰/APTES-GO composites was up to 1357.99 mg/g at pH = 4.1 and T = 50 °C, which was mainly attributed to the reducing activity of Fe⁰ and an abundance of functional groups (i.e., -COOH, C-OH and -OH) on the Fe⁰/APTES-GO composites. The electrostatic potential (ESP) from the calculation also supported that U(VI) tended to be reduced at the back side of the GO-Fe⁰ cluster.

Increased structural defects of graphene oxide compromised reductive capacity of ZVI towards hexavalent chromium

Graphene oxide (GO) was treated with irradiation beams to understand the defective degree of carbon structure of GO in relation to electron transfer property of impregnated zerovalent iron (ZVI). The GO-supported ZVI (ZVI/GO) was synthesized and then characterized by an X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy. The results showed that the oxygen-bearing functional groups, oxygen content and structural disorder were increased as a function of irradiation beam intensity. ZVI was dominant in the composites, but proportion of iron oxide increased with greater oxygen content. Batch sorption revealed that Cr(VI) removal decreased from 20.11 g kg^-1 to 2.30 g kg^-1 as solution pH rose from 3 to 9. Cr(VI) removal capacity was 26.39 g kg^-1, 23.12 g kg^-1 and 12.35 g kg^-1 for ZVI/GO₀, ZVI/GO_12.3 and ZVI/GO_36.9, respectively. The reduction capacity of sorbents followed similar trends as Cr(VI) sorption as per desorption experiment, which accounted for a major Cr(VI) detoxification mechanism by ZVI/GO composites. The electrochemical tests demonstrated that unfavorable electron transfer rate of ZVI/GO composites was aggravated by greater structural disorder of GO. Thus, higher dose of irradiations could create more disorder in graphitic carbon and promote oxidation of ZVI, which hindered Cr(VI) reduction.

Recent advances on preparation and environmental applications of MOF-derived carbons in catalysis

Carbon materials derived from metal organic frameworks (MOFs) have excellent properties of high surface area, high porosity, adjustable pore size, high conductivity and stability, and their applications in catalysis have become a rapidly expanding research field. In this review, we have summarized the synthesis strategies of MOF-derived carbons with different physical and chemical properties, obtained through direct carbonization, co-pyrolysis and post-treatment. The potential applications of derived carbons, especially monometal-, bimetal-, nonmetal-doped and metal-free carbons in organo-catalysis, photocatalysis and electrocatalysis are analyzed in detail from the environmental perspective. In addition, the improvement of catalytic efficiency is also considered from the aspects of increasing active sites, enhancing the activity of reactants and promoting free electron transfer. The function and synergy of various species of the composites in the catalytic reaction are summarized. The reaction paths and mechanisms are analyzed, and research ideas or trends are proposed for further development.