Enhanced removal of oxytetracycline antibiotics from water using manganese dioxide impregnated hydrogel composite: Adsorption behavior and oxidative degradation pathways

Exploring the potential of CoMoO4-modified graphitic carbon nitride to boost oxidation of amoxicillin micropollutants in hospital wastewater

This study investigates the removal of amoxicillin micropollutants (AM) from hospital wastewater using CoMoO4-modified graphitic carbon nitride (CMO/gCN). Consequently, CMO/gCN exhibits notable improvements in visible light absorption and electron-hole separation rates compared to unmodified gCN. Besides, CMO/gCN significantly enhances the removal efficiency of AM, attaining an impressive 96.5%, far surpassing the performance of gCN at 48.6%. Moreover, CMO/gCN showcases outstanding reusability, with AM degradation performance exceeding 70% even after undergoing six cycles of reuse. The removal mechanism of AM employing CMO/gCN involves various photoreactions of radicals (•OH, •O2-) and amoxicillin molecules under light assistance. Furthermore, CMO/gCN demonstrates a noteworthy photodegradation efficiency of AM from hospital wastewater, reaching 92.8%, with a near-complete reduction in total organic carbon levels. Detailed discussions on the practical applications of the CMO/gCN photocatalyst for removal of micropollutants from hospital wastewater are provided. These findings underline the considerable potential of CMO/gCN for effectively removing various pollutants in environmental remediation strategies.

2D/2D heterojunctions for rapid and self-cleaning removal of antibiotics via visible light-assisted peroxymonosulfate activation: Efficiency, synergistic effects, and applications

Developing eco-friendly and efficient technologies for treating antibiotic wastewater is crucial. Traditional methods face challenges in incomplete removal, high costs, and secondary pollution. Heterogeneous peroxymonosulfate (PMS) activation assisted by visible light shows promise, but suitable activators remain a huge challenge. Here, we synthesized cost-effective carbon nitride/bismuth bromide oxide (CN/BiOBr) heterojunctions. Such a heterojunction achieved rapid PMS activation, achieving over 90.00% tetracycline (TC) removal only within 1 min (kobs of 2.23 min-1), surpassing previous systems by nearly 1-2 orders of magnitude and even remarkably superior to the popular single-atom catalysts. The system exhibited self-cleaning properties, maintaining activity after 8 cycles and stability across a wide pH range (3.01 to 9.03). Quenching experiments and theoretical calculations elucidated the exclusive •O2- species involvement and removal pathways. Eco-toxicity assessment and total organic carbon results confirmed simultaneous degradation, detoxification, and mineralization. This system also showed excellent resistance to environmental factors, e.g., coexisting anions, varying pH, and water sources, and demonstrated potential in coking and medical wastewater purification. This study presents a novel technique for rapidly decontaminating antibiotic wastewater through visible light-assisted PMS activation and introduces innovative bionic catalytic oxidation combining light and darkness for practical applications.

Cyanide removal of gold cyanide residues by manganese compounds as new decyanation reagents

Plenty of the toxic gold cyanide residues are produced by cyanidation process of gold extraction. As a kind of hazardous solid wastes, cyanide residues must be treated to remove cyanide before disposal. In this study, the removal of cyanide in gold cyanide residues by manganese compounds (KMnO4 and MnO2) was investigated. It was found that both KMnO4 and MnO2 could be used as new decyanation reagents for cyanide removal. To make the residue after cyanide removal meet the national standard, it needed KMnO4 1.8 wt% for 60 min reaction or MnO2 1.0 wt% for 30 min reaction with about pH 8.0. The mechanisms of two processes were investigated by X-ray photoelectron spectroscopy (XPS). The results show that KMnO4 concentrates on the reactions with pyrite in the cyanide residue, the products are mainly Fe(II), Fe(III), SO42- and MnO2. KMnO4 added in the slurry could be consumed by pyrite before oxidation of cyanide, resulting in relatively low cyanide remove efficiency and high KMnO4 consumption. On the surface of the residue after MnO2 treatment, there are mainly pyrite, Fe(II), Mn(II), Fe-CN and CN-, showing that the MnO2 process focuses on the removal of cyanide in the cyanide residue. The MnO2 process has the advantages of low reagents consumption, short reaction time and high cyanide removal efficiency, presenting a promise use for cyanide removal of cyanide residues in a range of applications.

Efficacy of new generation biosorbents for the sustainable treatment of antibiotic residues and antibiotic resistance genes from polluted waste effluent

Antimicrobials are frequently used in both humans and animals for the treatment of bacterially-generated illnesses. Antibiotic usage has increased for more than 40% from last 15 years globally per day in both human populations and farm animals leading to the large-scale discharge of antibiotic residues into wastewater. Most antibiotics end up in sewer systems, either directly from industry or healthcare systems, or indirectly from humans and animals after being partially metabolized or broken down following consumption. To prevent additional antibiotic compound pollution, which eventually impacts on the spread of antibiotic resistance, it is crucial to remove antibiotic residues from wastewater. Antibiotic accumulation and antibiotic resistance genes cannot be effectively and efficiently eliminated by conventional sewage treatment plants. Because of their high energy requirements and operating costs, many of the available technologies are not feasible. However, the biosorption method, which uses low-cost biomass as the biosorbent, is an alternative technique to potentially address these problems. An extensive literature survey focusing on developments in the field was conducted using English language electronic databases, such as PubMed, Google Scholar, Pubag, Google books, and ResearchGate, to understand the relative value of the available antibiotic removal methods. The predominant techniques for eliminating antibiotic residues from wastewater were categorized and defined by example. The approaches were contrasted, and the benefits and drawbacks were highlighted. Additionally, we included a few antibiotics whose removal from aquatic environments has been the subject of extensive research. Lastly, a few representative publications were identified that provide specific information on the removal rates attained by each technique. This review provides evidence that biosorption of antibiotic residues from biological waste using natural biosorbent materials is an affordable and effective technique for eliminating antibiotic residues from wastewater.

Boosted Electrocatalytic Degradation of Levofloxacin by Chloride Ions: Performances Evaluation and Mechanism Insight with Different Anodes

As chloride (Cl-) is a commonly found anion in natural water, it has a significant impact on electrocatalytic oxidation processes; yet, the mechanism of radical transformation on different types of anodes remains unexplored. Therefore, this study aims to investigate the influence of chlorine-containing environments on the electrocatalytic degradation performance of levofloxacin using BDD, Ti4O7, and Ru-Ti electrodes. The comparative analysis of the electrode performance demonstrated that the presence of Cl- improved the removal and mineralization efficiency of levofloxacin on all the electrodes. The enhancement was the most pronounced on the Ti4O7 electrode and the least significant on the Ru-Ti electrode. The evaluation experiments and EPR characterization revealed that the increased generation of hydroxyl radicals and active chlorine played a major role in the degradation process, particularly on the Ti4O7 anode. The electrochemical performance tests indicated that the concentration of Cl- affected the oxygen evolution potentials of the electrode and consequently influenced the formation of hydroxyl radicals. This study elucidates the mechanism of Cl- participation in the electrocatalytic degradation of chlorine-containing organic wastewater. Therefore, the highly chlorine-resistant electrocatalytic anode materials hold great potential for the promotion of the practical application of the electrocatalytic treatment of antibiotic wastewater.

Removal of oxytetracycline from water by S-doped MIL-53(Fe): Synergistic effect of surface adsorption and persulfate activation

In this study, a novel catalyst based on MIL-53(Fe) was synthesized and modified through sublimed sulfur (S-MIL-53(Fe)) to induce a synergistic effect of surface adsorption and persulfate activation. The S-doped modification not only increased the surface area but also accelerated the electron transfer process of the iron cycle. The performance of the newly synthesized S-MIL-53(Fe) adsorptive catalyst was evaluated by chemical adsorption and peroxydisulfate (PDS) activated removal of an emerging pollutants, oxytetracycline (OTC). The S-MIL-53(Fe) adsorptive catalyst was able to adsorb 61.7% of OTC after 120 min, and the removal efficiency reached 84.8% within 5 min after PDS dosing. The boosting effect of sulfur on the system was confirmed by characterization analysis and experimental testing. Even after 7 cycles, the removal efficiency of S-MIL-53(Fe) (69.0%) for OTC remained superior to that of pure MIL-53(Fe) (25.1%). Additionally, the adsorption kinetics and adsorption isotherm model of the material were investigated. The possible OTC degrading process was proposed based on radical quenching and electron paramagnetic resonance (EPR). This study provides a feasible way to fabricate an S-doped MIL-53(Fe) adsorptive catalyst for the remediation of antibiotics-containing wastewater.

Environmental Application of Graphene and Its Forms for Wastewater Treatment: a Sustainable Solution Toward Improved Public Health

Public health is seriously jeopardized in developing countries due to poor sanitation and the presence of persistent pollutants in natural water bodies. Open dumping, wastewater discharge without proper treatment and atmospheric fallout of the organic and inorganic pollutants are the main causes behind the poor condition. Some of the pollutants pose a greater risk due to their toxicity and persistence. Such a class of pollutants are known as chemical contaminants of emerging concern (CECC), including antibiotics and drug residues, endocrine disruptors, pesticides and micro- and nano-plastics. Conventional treatment methods cannot treat them properly and are often associated with several disadvantages. However, the chronological development of techniques and materials for their treatment has exhibited graphene as an efficient candidate for environmental remediation. This current review considers the various graphene-based materials, their properties, advancement in synthesis methods with time and their detailed application in removing dyes, antibiotics and heavy metals. It has been discussed how graphene and its derivatives exhibit unique electronic, mechanical, structural and thermal properties. In this paper, the mechanism of adsorption and degradation using these graphene-based materials has also been discussed vividly. In addition to this, a bibliographic analysis was performed to identify the trend of research related to graphene and its derivatives in the adsorption and degradation of pollutants round the globe reflected by the publications. Therefore, this review can be instrumental in understanding the fact that further development of graphene-based materials and their mass production can provide a very effective and economical wastewater treatment method.

Stable photodegradation of antibiotics by the functionalized 3D-Bi2MoO6@MoO3/PU composite sponge: High efficiency pathways, optical properties and Z-scheme heterojunction mechanism

The designation and fabrication of heterogeneous photocatalyst with superior redox capability is an important technique for emerging pollutants treatment. In this study, we designed the Z-scheme heterojunction of stable 3D-Bi₂MoO₆@MoO₃/PU, which could not only accelerate the migration and separation in photogenerated carriers, but also stabilize the separation rate of photo-generation carriers. In the Bi₂MoO₆@MoO₃/PU photocatalytic system, 88.89% of oxytetracycline (OTC, 10 mg L^-1) and 78.25%-84.59% of multiple antibiotics (SDZ, NOR, AMX and CFX, 10 mg L^-1) could be decomposed within 20 min under the optimized reaction condition, revealing the superior performance and potential application value. Specifically, the morphology, chemical structure and optical properties detection of Bi₂MoO₆@MoO₃/PU greatly affected the direct Z-scheme electron transferring mode in the p-n type heterojunction. Besides, the ·OH, h⁺, ·O₂^- dominated the photoactivation process through ring-opening, dihydroxylation, deamination, decarbonization and demethylation in OTC decomposition. Expectantly, the stability and universality of Bi₂MoO₆@MoO₃/PU composite photocatalyst would further broaden the practical application and demonstrated that the potential of photocatalytic technique in antibiotics pollutants for wastewater remediation.

Preparation of phosphoric-modified aloe vera/chitosan aerogels and their efficient adsorption of U(VI)

The efficient adsorption of radioactive elements from nuclear wastewater is an important research topic in the environmental field. The unique three-dimensional porous structure of aerogels has great potential in the field of adsorption. Phosphoric-modified aloe vera/chitosan aerogel (CS/AL-AP) was prepared from chitosan, phosphoric acid, and aloe powder by vacuum freeze-drying self-assembly. The maximum adsorption of uranyl ions by CS/AL-AP was found to be 322.34 mg/g at pH 6, adsorption time of 120 min, solid-to-liquid ratio of 0.125 g/L, reaction temperature of 303 K, and initial uranyl ion concentration of 50 mg/L. The adsorption process is consistent with the Langmuir isotherm model and the quasi-secondary kinetic model, indicating that the adsorption process is monolayer adsorption. The type of adsorption is mainly chemisorption. FTIR and XPS analyses indicate that the adsorption of U(VI) by CS/AL-AP results from the combined action of coordination or chelation of amino, hydroxyl, and carboxyl groups. In addition, CS/AL-AP shows excellent adsorption capacity in the presence of complex co-existing ions. After five adsorption-desorption experiments, the adsorption capacity of CS/AL-AP for uranyl ions remained at a high level. It indicates that CS/AL-AP has good stability and recoverability. The results indicate that CS/AL-AP has excellent potential in the field of uranium removal.

Low-cost Posidonia oceanica bio-adsorbent for efficient removal of antibiotic oxytetracycline from water

The presence of antibiotics as micro-contaminants in the water and aqueous environments is a health concern to humans and the ecosystem. Therefore, their elimination by adsorption to available and cheap materials in water treatment plants is a research topic of high relevance. The present paper reports on the adsorption behavior of oxytetracycline on a bio-adsorbent prepared from Posidonia oceanica; an abundant Mediterranean biomass. Characterization of the pretreated Posidonia biomaterial was achieved using several analyses such as Boehm acid-base titration method, pH_PZC determination, and analysis techniques (FTIR, ¹³C CP-MAS NMR, optical microscopy, and TGA). The pH_PZC occurred around pH 2.11. Posidonia biomaterial showed a fast and high uptake rate throughout the adsorption process, which is a definite advantage for analytical applications such as water decontamination. The experimental kinetic data fitted very rightly the pseudo-second-order kinetic model and the equilibrium uptake can adopt the bi-Langmuir isotherm model for all studied pH values which assumes adsorptions at the two localized sites. Maximum adsorption capacities of 11.8 mg∙g^-1 and 4.4 mg∙g^-1 for the two adsorption sites are reached at pH 6. The oxytetracycline adsorption process onto Posidonia bio-adsorbent is spontaneous (Δ_adsG⁰ < 0), exothermic (Δ_adsH⁰ < 0), and entropically favorable (Δ_adsS⁰ > 0). The effect of pH on adsorption behavior and the thermodynamic parameters of adsorption are consistent with a possible origin of adsorption of oxytetracycline by means of hydrogen bonding interactions between surface hydroxyl and phenolic groups of the biomaterial and oxytetracycline. The proposed green and environmentally friendly biomaterial offers potential benefits as a bio-adsorbent in the remediation of aquatic environments contaminated by various organic materials.

High-capacity removal of oxytetracycline hydrochloride from wastewater via Mikania micrantha Kunth-derived biochar modified by Zn/Fe-layered double hydroxide

Antibiotic contamination in water has been an increasing global concern, and how to effectively remove antibiotics (e.g., oxytetracycline [OTC] hydrochloride) from wastewater becomes imperative. In this study, the biochar derived from an invasive plant (Mikania micrantha Kunth) was synthesized with Zn/Fe- layered double hydroxide (LDH) by co-precipitation method (ZnFe-LDH/MBC) to remove OTC from water. ZnFe-LDH/MBC posed the highest OTC removal performance of 426.61 mg/g. ZnFe-LDH/MBC exhibited stability and efficiency in OTC adsorption at different pH levels and under interfering conditions with co-existing ions, as well as outstanding regeneration capabilities during adsorption-desorption cycles. Furthermore, the removal of OTC by ZnFe-LDH/MBC was mediated by several processes including pore filling, hydrogen bonding force, electrostatic interaction, π-π interaction, as well as complexation. Consequently, ZnFe-LDH/MBC has excellent potential for the purification of OTC pollutants that is low-cost, efficient, and environmentally friendly.

Enhanced removal of organic contaminants by novel iron-carbon and premagnetization: Performance and enhancement mechanism

Iron-carbon (Fe-C) microelectrolysis has attracted considerable attention in wastewater treatment due to its excellent ability to remove contaminants. Herein, novel Fe-C granules were synthesized by simple calcination method for removing organic contaminations, and a cost-effective and environmentally friendly method, namely pre-magnetization, was used to improve the micro-electrolysis performance of Fe-C. Batch experiments proved that premagnetized iron-carbon (pre-Fe-C) could significantly improve the removal of methyl orange (MO) at different Fe-C mass ratios (1:2-2:1), material dosages (1.0-2.5 g/L), initial pH values (3.0-5.0), and MO concentrations (10.0-50.0 mg/L). Electrochemical analysis showed that premagnetization could increase the current density and reduce the charge transfer resistance of the microelectrolysis system, making Fe-C more susceptible to electrochemical corrosion. Characterizations confirmed that the corrosion products of the materials included FeO, Fe₂O₃, and Fe₃O₄, and more corrosion products were formed in the pre-Fe-C system. Radical quenching experiments and electron spin resonance spectroscopy verified that ^•OH, ¹O₂, and O₂^-• were all involved in pollutant removal, and premagnetization could promote the generation of more reactive oxygen species. Overall, the pre-Fe-C process could effectively remove various organic pollutants, exhibit good adaptability to complex water environments, and hold potential for industrial applications.

Synthesis of a highly recoverable 3D MnO2/rGO hybrid aerogel for efficient adsorptive separation of pharmaceutical residue

Water contamination by non-steroidal anti-inflammatory drugs, such as acetaminophen, is an emerging ecological concern. In this study, a new three-dimensional manganese dioxide-engrafted reduced graphene oxide (3D MnO₂/rGO) hybrid aerogel was developed for acetaminophen sequestration. The synthesis involved firstly the self-assembly of GO aerogel, followed by thermal reduction and in-situ MnO₂ growth by redox-reaction. The aerogel demonstrated interlinked planes with smooth surfaces deposited with MnO₂ nanospheres and pores of 138.4 - 235.3 µm width. The influences of adsorbent dosage, initial pH, acetaminophen concentration, temperature and contact time were investigated. It was determined that the adsorption of acetaminophen occurred on uniform sorption sites in the aerogel, as suggested by the best fit of data to the Langmuir isotherm, yielding a maximum adsorption capacity of 252.87 mg/g. This highest adsorption performance of the 3D MnO₂/rGO aerogel was attained at a dosage of 0.6 g/L, initial pH of 6.2 and temperature of 40°C. The process kinetics were in-line with the pseudo-first-order and pseudo-second-order kinetics at 10 and 20 - 500 mg/L concentrations, respectively. Thermodynamic assay showed the spontaneity and endothermicity features of the 3D MnO₂/rGO-acetaminophen system. The acetaminophen adsorption mechanisms were mainly hydrogen bonding and pore entrapment. Moreover, the as-synthesised aerogel was effectively regenerated using acetone and re-utilised in four adsorption-desorption cycles. Overall, the results highly recommend the implementation of the 3D MnO₂/rGO hybrid aerogel for purification of wastewater polluted by acetaminophen residue.

Kill two birds with one stone: Selective and fast removal and sensitive determination of oxytetracycline using surface molecularly imprinted polymer based on ionic liquid and ATRP polymerization

Oxytetracycline (OTC) residue in food and environment has potential threats to ecosystem and human health, thus its sensitive monitoring and effective elimination are very important. In this work, a new molecularly imprinted polymer (MIP) composite was prepared through atom transfer radical polymerization by using OTC as template, gold nanoparticles modified carbon nanospheres (Au-CNS) as supporter, ionic liquids (IL) as functional monomer and cross-linking agent. The obtained MIP-IL@Au-CNS composite was characterized by Fourier transform infrared absorption spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy and transmission electron microscopy. It displayed high imprinting factor (5.50) and adsorption capacity (56.7 mg g^-1), and could achieved the adsorption equilibrium in short time (about 15 min). Results also illustrated that the adsorption process basically conformed to the quasi-second-order kinetic model and Freundlich model, and MIP-IL@Au-CNS could be recycled at least 5 times. Furthermore, a sensitive OTC electrochemical sensor was developed by combining MIP-IL@Au-CNS with IL-modified carbon nanocomposites (IL@N-rGO-MWCNT). The resulting sensor demonstrated a linear response to OTC in the wide range of 0.02-20 μM, and the detection limit was down to 5 nM. It also had the advantages of high selectivity, fast elution/regeneration and simple construction procedure. The sensor had been applied to the detection of real samples, and acceptable recovery (96.4%-106%) and RSD (3.2%-6.2%) were obtained. This work expands the application of IL-based MIP in pollutant monitoring and enriching.

A study of the effect of reactive oxygen species induced by violet and blue light from oxytetracycline on the deactivation of Escherichia coli

Oxytetracycline (OTC), a tetracycline antibiotic, is a broad-spectrum antibacterial agent. In this investigation, liquid chromatography-mass spectrometry (LC-MS) is utilized to determine the effects of blue light (λ = 448 nm) illumination (BLIA) and violet light (λ = 403 nm) illumination (VLIA) on conformational changes in OTC at pH 7.8. The photochemical effect of OTC that is exposed to BLIA and VLIA on the deactivation of Escherichia coli (E. coli) is studied. The deactivation of E. coli has an insignificant effect on treatment with OTC alone. OTC is relatively unstable under BLIA and VLIA illumination in an alkaline solution, and OTC has been shown to inactivate E. coli by generating reactive oxygen species (ROS). Less anionic superoxide radicals (O₂^•-) are generated from OTC that is treated with BLIA than that from VLIA treatment, so OTC is more efficient in inactivating E. coli under VLIA. Inactivation of reduction rates of 0.51 and 3.65 logs in E. coli are achieved using 0.1 mM OTC under BLIA for 120 min and VLIA for 30 min, respectively, under the same illumination intensity (20 W/m²). Two photolytic products of OTC (PPOs) are produced when OTC is exposed to BLIA and VLIA, with molecular ions at m/z 447 and 431, molecular formulae C₂₁H₂₂N₂O₉ and C₂₁H₂₂N₂O₈, and masses of 446.44 and 430.44 g/mol, respectively. The results show that when exposed to VLIA, OTC exhibits enhanced inactivation of E. coli, suggesting that the photochemical treatment of OTC is a potential supplement in a hygienic process.

Investigation of seawater mineral promoted pyrolysis at low temperature for improving the adsorption capabilities of biochar

Naturally abundant seawater mineral was employed to engineer banana pseudostem and bamboo biochars through pyrolysis at different low temperatures for improving their adsorption capabilities for methylene blue (MB) and tetracycline (TC). The adsorption capabilities were greatly enhanced as the biochars were pyrolyzed at 300 °C with 50/1 (mL/g) dosage of seawater to biomass. For instance, the engineered banana pseudostem biochar exhibited 8.00 and 6.54 times higher adsorption capabilities than the corresponding pristine biochar for MB (447.79 mg/g vs 55.96 mg/g) and TC (100.59 mg/g vs 16.75 mg/g) at 25 °C, respectively. The characterization results indicated that a large number of carboxylates, lactone acid salts, and alkoxides were generated on the engineered biochar and a high cation exchange capacity was gained. The adsorption of MB was mainly attributed to cation exchange complying with hydrogen bonding and electrostatic interaction, whereas the adsorption of TC was realized by hydrogen bonding and complexation.

Cattail fibers as source of cellulose to prepare a novel type of composite aerogel adsorbent for the removal of enrofloxacin in wastewater

In this study, cattail was researched as a natural cellulose source to extract cellulose. Dewaxing, alkali and bleaching treatments were carried out for the cattail fibers (CFs). The FTIR, SEM and XRD results indicated that hemicellulose and lignin were successfully removed from the CFs, and the content of cattail cellulose increased from 41.66 ± 1.11% to 89.72 ± 1.07%. Subsequently, cellulose aerogel was prepared by the extracted cattail cellulose. The Zeolitic imidazolate framework-8 (ZIF-8) was uniformly loaded onto the surface of cellulose aerogel by the in situ growth, and ZIF-8 Cattail Cellulose Aerogel (ZCCA) was finally prepared. The SEM, FTIR, XRD and TGA results further confirmed the successful preparation of ZCCA. Additionally, the results of the adsorption experiment showed that ZCCA had excellent adsorption performance for enrofloxacin, and the maximum adsorption capacity of enrofloxacin reached 172.09 mg·g^-1 while showing good reusability. The adsorption process followed the pseudo-second-order kinetic model and the Langmuir isotherm model. Thermodynamic studies showed that the adsorption of enrofloxacin was a spontaneous endothermic reaction and that the adsorption mechanism involves the interaction of hydrogen bonds, electrostatic and π-π stacking.

Toward Selective Oxidation of Contaminants in Aqueous Systems

The presence of diverse pollutants in water has been threating human health and aquatic ecosystems on a global scale. For more than a century, chemical oxidation using strongly oxidizing species was one of the most effective technologies to destruct pollutants and to ensure a safe and clean water supply. However, the removal of increasing amount of pollutants with higher structural complexity, especially the emerging micropollutants with trace concentrations in the complicated water matrix, requires excessive dosage of oxidant and/or energy input, resulting in a low cost-effectiveness and possible secondary pollution. Consequently, it is of practical significance but scientifically challenging to achieve selective oxidation of pollutants of interest for water decontamination. Currently, there are a variety of examples concerning selective oxidation of pollutants in aqueous systems. However, a systematic understanding of the relationship between the origin of selectivity and its applicable water treatment scenarios, as well as the rational design of catalyst for selective catalytic oxidation, is still lacking. In this critical review, we summarize the state-of-the-art selective oxidation strategies in water decontamination and probe the origins of selectivity, that is, the selectivity resulting from the reactivity of either oxidants or target pollutants, the selectivity arising from the accessibility of pollutants to oxidants via adsorption and size exclusion, as well as the selectivity due to the interfacial electron transfer process and enzymatic oxidation. Finally, the challenges and perspectives are briefly outlined to stimulate future discussion and interest on selective oxidation for water decontamination, particularly toward application in real scenarios.