Effective promotion of g-C3N4 photocatalytic performance via surface oxygen vacancy and coupling with bismuth-based semiconductors towards antibiotics degradation

Emerging strategies in the sustainable removal of antibiotics using semiconductor-based photocatalysts

In the constantly growing field of environmental sustainability, the threat of newly discovered pollutants, particularly antibiotics, has become a crucial concern. The widespread presence of these pharmaceutical substances in water sources presents a complex hazard to human health and ecological balance, requiring immediate and novel intervention techniques. Regarding this, semiconductor-based photocatalysts have appeared as promising candidates, providing a sustainable and efficient way to remove antibiotics from aquatic ecosystems. Nanomaterials can effectively and precisely break down and neutralize antibiotic compounds with high efficiency and selectivity by utilizing a complex interaction between radical reactive oxygen species and non-radical equivalents under light irradiation. Although photocatalysts have certain drawbacks, such as a limited capacity to absorb light and concerns about catalytic stability, photocatalysis outperforms other advanced oxidation processes in multiple aspects. This study focuses on summarizing recent advances in the sustainable removal of antibiotics using semiconductor-based photocatalysts. By reviewing the latest studies and sustainable technologies, this study presents new insights into the complex relationship between contaminants and catalytic degradation processes. Compared to single and binary photocatalysts, modified ternary composites were found to have superior photodegradation performance under visible light exposure. To be specific g-C3N4-based ternary photocatalysts exhibited more than 90% degradation of tetracycline and sulfamethazine antibiotics within one hour of irradiation. This study addresses the antibiotic degradation efficiency during photocatalytic processes and suggests new approaches to improve the performance and scalability for wider use in real-world situations.

Synthesis of magnetic NiFe2O4/g-C3N4 heterojunction photocatalysts for boosting dye degradation performance under visible-light irradiation

Water pollution from dyes in wastewater is a critical global issue, as these stable organic dyes resist biodegradation, posing serious threats to aquatic ecosystems. To address this situation, advanced photocatalysts have been developed. Here, NiFe2O4/g-C3N4 was synthesized for the photocatalytic degradation of Rhodamine B (RhB) dye in the presence of H2O2 and visible light. Physicochemical analysis results showed NiFe2O4 nanoparticles dispersed in the g-C3N4 matrix, with an upward trend in the saturation magnetization of CNFx as NiFe2O4 content rose. The surface area of CNF30 was 62.3 m2 g-1, outperforming both NiFe2O4 (23.2 m2 g-1) and g-C3N4 (48.5 m2 g-1). NiFe2O4/g-C3N4 could be reused up to four cycles, and efficiently catalyzed the degradation of nearly 98% RhB dye, showing a decreased rate of up to 95% COD. Through scavenger studies, the main role of ˙OH was demonstrated. Therefore, highly efficient and recyclable NiFe2O4/g-C3N4 can be a potential photocatalyst for degradation of dyes.

A focused review on photocatalytic potential of graphitic carbon nitride (g-C3N4) based metal oxide-nanostructures for effective remediation of most overused antibiotics

Researchers in the field of photocatalysis are interested in finding a solution to the problem of charge transfer and recombination in photodegradation mechanisms. The ideal photoactive catalyst would be inexpensive, environmentally friendly, easily manufactured, and highly efficient. Graphitic carbon nitride (g-C3N4) and metal oxide (MOx) based nanocomposites (g-CN/MOx) are among the photocatalysts that provide the best results in terms of charge transfer capacity, redox capabilities, and charge recombination inhibition. This article provides a comprehensive overview of the latest research on antibiotic removal from wastewater using photocatalysts based on g-C3N4 and metal oxides nanocomposites. Amoxicillin (AMX), Azithromycin (AZM), Cefixime (CFM), Ciprofloxacin (CIP), and Tetracycline (TC) are some of the common antibiotics that are the focus of this review article's examination of the photocatalytic behavior of various g-C3N4/metal oxide-based photocatalysts. A research gap demonstrates that many studies are required to use these nanocomposites for photodegradation of antibiotics. By providing a better grasp of the photocatalysis process, this review encourages scientists and researchers to develop an accurate and appropriate photocatalyst to reduce environmental risks. The main findings of this review article suggest that the cost-effective g-C3N4/MOx-based nanocomposites exhibit excellent photodegradation properties, high charge transfer, broadening light response, and charge separation. They promote enhanced charge transportation, superior electron conductivity, high redox capability, and suppressing charge recombination rate. The photodegradation mechanism involves various reactive oxygen species (ROSs), including superoxide radicals, hydroxyl radicals, and holes which promotes the photocatalysis process. The exact transportation mechanism of electrons and holes is unclear, but a rapid charge-carrier transit can significantly increase and speed up the photooxidation process.

A Review on Bi2WO6-Based Materials for Photocatalytic CO2 Reduction

Photocatalytic reduction of CO2 (PCR) technology offers the capacity to transmute solar energy into chemical energy through an eco-friendly and efficacious process, concurrently facilitating energy storage and carbon diminution, this innovation harbors significant potential for mitigating energy shortages and ameliorating environmental degradation. Bismuth tungstate (Bi2WO6) is distinguished by its robust visible light absorption and distinctive perovskite-type crystal architecture, rendering it highly efficiency in PCR. In recent years, numerous systematic strategies have been investigated for the synthesis and modification of Bi2WO6 to enhance its photocatalytic performance, aiming to achieve superior applications. This review provides a comprehensive review of the latest research progress on Bi2WO6 based materials in the field of photocatalysis. Firstly, outlining the fundamental principles, associated reaction mechanisms and reduction pathways of PCR. Then, the synthesis strategy of Bi2WO6-based materials is introduced for the regulation of its photocatalytic properties. Furthermore, accentuating the extant applications in CO2 reduction, including metal-Bi2WO6, semiconductor-Bi2WO6 and carbon-based Bi2WO6 composites etc. while concludes with an examination of the future landscape and challenges faced. This review hopes to serve as an effective reference for the continuous improvement and implementation of Bi2WO6-based photocatalysts in PCR.

Unlocking solar energy's potential: Dual photocatalytic activities of g-C3N4/Sb2S3 for hydrogen evolution and tetracycline degradation in sunlight

This study focuses on developing a g-C3N4/Sb2S3 heterojunction photocatalyst with different g-C3N4 to Sb2S3 weight ratios (1:1, 1:3, and 3:1) for degrading tetracycline (TC) pollutants. The 1:3 ratio (13 GS) exhibited optimal photocatalytic performance, achieving 99% TC degradation under sunlight within 120 min, compared to 78.4% under visible light and 38% under UV light. The 13 GS catalyst demonstrated strong reusability, maintaining 80% degradation efficiency after six cycles. Scavenger experiments identified hydroxyl radicals as crucial for TC degradation, with DMSO reducing activity by 30%. The photocatalyst also showed high hydrogen production with an apparent quantum efficiency (AQE) of 19.8% under standard conditions, and improved AQE in acidic (23%) and basic (22.7%) conditions, and with CH3OH (23.2%). This g-C3N4/Sb2S3 heterojunction offers a promising solution for degrading toxic contaminants and has the potential for solar-powered applications.

Tungsten-based nanocatalysts with different structures for visible light responsive photocatalytic degradation of bisphenol A

Environmental pollution, such as water contamination, is a critical issue that must be absolutely addressed. Here, three different morphologies of tungsten-based photocatalysts (WO3 nanorods, WO3/WS2 nanobricks, WO3/WS2 nanorods) are made using a simple hydrothermal method by changing the solvents (H2O, DMF, aqueous HCl solution). The as-prepared nanocatalysts have excellent thermal stability, large porosity, and high hydrophilicity. The results show all materials have good photocatalytic activity in aqueous media, with WO3/WS2 nanorods (NRs) having the best activity in the photodegradation of bisphenol A (BPA) under visible-light irradiation. This may originate from increased migration of charge carriers and effective prevention of electron‒hole recombination in WO3/WS2 NRs, whereby this photocatalyst is able to generate more reactive •OH and •O2- species, leading to greater photocatalytic activity. About 99.6% of BPA is photodegraded within 60 min when using 1.5 g/L WO3/WS2 NRs and 5.0 mg/L BPA at pH 7.0. Additionally, the optimal conditions (pH, catalyst dosage, initial BPA concentration) for WO3/WS2 NRs are also elaborately investigated. These rod-like heterostructures are expressed as potential catalysts with excellent photostability, efficient reusability, and highly active effectivity in different types of water. In particular, the removal efficiency of BPA by WO3/WS2 NRs reduces by only 1.5% after five recycling runs and even reaches 89.1% in contaminated lake water. This study provides promising insights for the nearly complete removal of BPA from wastewater or different water resources, which is advantageous to various applications in environmental remediation.

Constructing a Titanium Silicon Molecular Sieve-Based Z-Scheme Heterojunction with Enhanced Photocatalytic Activity

Titanium silicon molecular sieve (TS-1) is an oxidation catalyst that possesses a long lifetime of charge transfer excited state, high Ti utilization efficiency, large specific surface area, and good adsorption property; therefore, TS-1 acts as a Ti-based photocatalyst candidate. In this work, TS-1 coupled Bi2MoO6 (TS-1/BMO) photocatalysts were fabricated via a facile hydrothermal route. Interestingly, the optimized TS-1/BMO-1.0 catalyst exhibited a decent photodegradation property toward tetracycline hydrochloride (85.49% in 120 min) under the irradiation of full spectrum light, which were 4.38 and 1.76 times compared to TS-1 and BMO, respectively. The enhanced photodegradation property of the TS-1/BMO-1.0 catalyst could be attributed to the reinforced light-harvesting capacity of the photocatalyst, high charge mobility, and suitable band structure for tetracycline hydrochloride degradation. In addition, the mechanism of photocatalytic degradation of tetracycline hydrochloride by the TS-1/BMO-1.0 catalyst was reasonably proposed based on the band structure, trapping, and ESR tests. This research provided feasible ideas for the design and construction of high-efficiency photocatalysts for contaminant degradation.

Harnessing the photocatalytic potential of bismuth ferrite-activated carbon nanocomposite (BFO-AC) for Staphylococcus aureus decontamination under visible light

In response to the escalating global issue of microbial contamination, this study introduces a breakthrough photocatalyst: bismuth ferrite-activated carbon (BFO-AC) for visible light-driven disinfection, specifically targeting the Gram-positive bacterium Staphylococcus aureus (S. aureus). Employing an ultrasonication method, we synthesized various BFO-AC ratios and subjected them to comprehensive characterization. Remarkably, the bismuth ferrite-activated carbon 1:1.5 ratio (BA 1:1.5) nanocomposite exhibited the narrowest band gap of 1.86 eV. Notably, BA (1:1.5) demonstrated an exceptional BET surface area of 862.99 m2/g, a remarkable improvement compared to pristine BFO with only 27.61 m2/g. Further investigation through FE-SEM unveiled the presence of BFO nanoparticles on the activated carbon surface. Crucially, the photocatalytic efficacy of BA (1:1.5) towards S. aureus reached its zenith, achieving complete inactivation in just 60 min. TEM analysis revealed severe damage and rupture of bacterial cells, affirming the potent disinfection capabilities of BA (1:1.5). This exceptional disinfection efficiency underscores the promising potential of BA (1:1.5) for the treatment of contaminated water sources. Importantly, our results underscore the enhanced photocatalytic performance with an increased content of activated carbon, suggesting a promising avenue for more effective microorganism inactivation.

Constructing 3D flower-like S-scheme N-Bi2O2CO3/g-C3N4 heterojunction with enhanced photocatalytic performance

Mineral processing wastewater contains a lot of organic matter and heavy metal ions, and poor self-degradation ability makes it a key treatment object in environmental treatment. Photocatalysis is a promising technology to efficiently mineralize refractory contaminants from wastewater. In this work, 3D flower-like S-scheme N-Bi2O2CO3/g-C3N4 heterostructures were successfully constructed by hydrothermal method with the auxiliary of ionic liquids. The photocatalytic experiments show that the catalytic activity of heterojunction photocatalysts was significantly higher than that of bare g-C3N4 and N-Bi2O2CO3 for the degradation of two pollutants. NBOC/CN-2 shows the highest photocatalytic performance, and the degradation efficiency of sodium isobutyl xanthate (SIBX) on NBOC/CN-2 is 1.85 and 3 times that of bare g-C3N4 and Bi2O2CO3, respectively. The degradation efficiency of m-Cresol on NBOC/CN-2 is 8.34 and 6.93 times that of bare g-C3N4 and N-Bi2O2CO3, respectively. This significantly enhanced photocatalytic activity is attributed to the formation of flower-like heterojunctions, which can greatly increase the specific surface area and facilitate the separation and migration of photogenerated carriers. Total organic carbon (TOC) experiment proves that the two pollutants are effectively mineralized under the action of the prepared photocatalyst. The degradation path of m-Cresol degradation products was inferred based on the ion fragments. The capture experiment and Nitro-blue tetrazolium (NBT)-•O2- measurement show that superoxide radical plays a major role in photocatalytic degradation. The outstanding stability of the prepared flower-like heterojunction samples was examined by cyclic experiments. The S-scheme charge transfer mechanism has been proposed to explain the boosted activity of the flower-like heterojunction photocatalyst. This work provides a new idea for the design of efficient and stable g-C3N4-based photocatalyst for the photocatalytic degradation of refractory wastewater.

Visible Light-Assisted Degradation of Sulfamethoxazole on 2D/0D Sulfur-Doped Bi2O3/MnO2 Z-Scheme Heterojunction Immobilized Photocatalysts

Retrieving the spent photocatalysts from the reaction system is always a challenging task. Therefore, the present work is focused on immobilizing sulfur-doped-Bi2O3/MnO2 (S-BOMO) heterojunction photocatalysts over different support matrices and evaluating their performance for the removal of sulfamethoxazole (SMX) in water under visible light. Our findings revealed S-BOMO coated clay beads (S-BOMO CCB) achieving more than 86% (240 min) SMX degradation ∼3, ∼1.3, and ∼2 times higher compared to S-BOMO coated on the different substrates, including glass beads, floating stones, and polymer material substrates, respectively. Mott-Schottky measurements confirmed the construction of the Z-scheme heterojunction involving MnO2 and 2S-Bi2O3. This Z-scheme mechanism, along with its narrow band gap of 1.58 eV, resulted in a rapid spatial transfer of the photogenerated charge carriers between the semiconductors and is believed to enhance the overall photocatalytic activity of the nanocomposite. Radical trapping and electron paramagnetic resonance results clearly established the active role of hydroxyl radicals and hydrogen peroxide in the degradation of SMX. Further, the 2S-BOMO CCB demonstrated excellent stability and photocatalytic activity over multiple runs. According to the sensitivity analysis and the results of anion effect experiments, phosphate and sulfate ions exhibit a significant impact on sulfamethoxazole degradation. Toxicity analysis revealed that 2S-BOMO CCB and sulfamethoxazole degradation byproducts were apparently innocuous. Additionally, the practical applicability of 2S-BOMO CCB was examined in various real water matrices, with the degradation efficiency followed the order: tap water < groundwater < surface water < hospital wastewater < municipal wastewater < pharmaceutical industry wastewater. The economic assessment revealed the reduction in the overall cost of the immobilized 2S-BOMO following the recovery process. Overall, the findings of this work provided critical insights into the synthesis and performance of incredibly effective and stable immobilized photocatalysts for the degradation of pharmaceutical pollutants.

Activation of peroxymonosulfate by biochar-supported Fe3O4 derived from oily sludge to enhance the oxidative degradation of tetracycline hydrochloride

Carbon materials used for catalysis in advanced oxidation processes tend to be obtained from cheap and readily available raw materials. We constructed a carbon material, OSC@Fe3O4, by loading Fe3O4 onto the pyrolyzed hazardous waste oily sludge. OSC@Fe3O4 was then used to activate peroxymonosulfate (PMS) for the removal of tetracycline hydrochloride (TTCH) from water. At 298 K, 0.2 g⋅L-1 of catalyst and 0.3 g⋅L-1 of PMS, the reaction rate constant of the OSC@I-2/PMS system reached 0.079 min-1, with a TTCH removal efficiency of 92.6%. The degradation efficiency of TTCH remained at 81% after five cycles. The specific surface area and pore volume of OSC@I-2 were 263.9 m2⋅g-1 and 0.42 cm3⋅g-1, respectively, which improved the porous structure of the carbon material and provided more active points, thus improving the catalytic performance. N and S were doped into the oily sludge carbon due to the presence of N- and S-containing compounds in the raw oily sludge. N and S doping led to more electron-rich sites with higher negative charges in OSC@I-2 and gave the oily sludge carbon a higher affinity to PMS, thereby promoting its ability to activate PMS. Sulfate radicals (SO4•‾) played a dominant role in the degradation of TTCH, with demethylation and the breaking of double bonds being a possible degradation pathway. A biotoxicity test showed that the microbial toxicity of the degradation intermediates was significantly reduced. This work provides a strategy for the application of PMS-based catalysts derived from waste carbon resources.

An S-scheme NH2-MIL-101(Fe)@MCN/Bi2O3 heterojunction photocatalyst for the degradation of tetracycline and production of H2O2

Effective and durable photocatalysts are essential for the decomposition of persistent contaminants and the generation of hydrogen peroxide. In this study, we successfully constructed an S-type heterojunction by in situ growing Bi2O3 nanocrystals and NH2-MIL-101(Fe) onto surface-modified g-C3N4. The process of charge transfer in the S-type heterojunction was confirmed using ISI-XPS, DFT calculations, capture experiments, and EPR signals. The combined influence of the heterojunction and MOF demonstrated remarkable photocatalytic performance in the breakdown of tetracycline (TC) and the generation of hydrogen peroxide (H2O2). In the enhanced setup (10%-NH2-MIL-101(Fe)@MCN/Bi2O3), full degradation of TC was accomplished within 50 min under visible light exposure. Additionally, a notable H2O2 yield of 655.63 μmol/g was attained, all achieved without the necessity of sacrificial agents or supplementary oxygen. Based on the outcomes of the dual functionality, the exceptional performance of the ternary composite material can be ascribed to the collaborative influence of the heterojunction and MOF. This collaborative effect expands the light absorption range in the visible region, suppresses the recombination of electron-hole pairs, and enhances the photocatalytic redox ability. The system demonstrates significant potential in the efficient in situ production of H2O2 and removal of recalcitrant organic pollutants in pure water.

Unleashing the power of sunlight: Bi2O3/Sb2S3 photocatalysis for sustainable wastewater remediation of Tetracycline and Rhodamine-B

The use of heterojunction photocatalysts for pollutant decomposition has garnered significant interest in mitigating water contamination and environmental pollution. Our present study focuses on synthesizing Bi2O3/Sb2S3 heterojunction photocatalyst having variable mole ratios by employing a hydrothermal technique. Loading Sb2S3 onto Bi2O3 enables broad-spectrum solar light absorption, efficient segregation of charges, and enhanced surface area, which are excellent traits for photocatalysis. Both Bi2O3 and Sb2S3 showed nano-rod type morphology, while Sb2S3 was present as smaller nano-rods and Bi2O3 as larger ones. The photocatalytic performance of this heterojunction photocatalyst was examined using Rhodamine-B (RhB) and Tetracycline (TC) under solar light illumination for 120 min. Remarkable decomposition efficiency was achieved, with a 98.2% degradation rate observed for RhB having a rate constant of 0.03149 min-1. Similar experiments were conducted using other light sources as well, such as visible light and UV light. However, only 83% and 69% RhB degradation rates were attained with visible and UV light, respectively, indicating that natural sunlight is the superior light source for our catalyst. A 91.5% degradation rate was achieved for TC with the rate constant of 0.01749 min-1, in the presence of sunlight for 120 min. A small amount (0.3 g/L) of 1:3 Bi2O3/Sb2S3 (13BOSBS) photocatalyst was enough to bring such a good result. The photocatalytic activity of our catalyst, that is, 98.2% RhB degradation, is much higher than that of commercially available TiO2-P25 powder, as the latter only achieved 52% RhB degradation. The pH at which the surface of Bi2O3/Sb2S3 has a zero charge (pHpzc) was determined to be 5.37 and the maximum decomposition of RhB was achieved at pH 7. Reusability tests verified the remarkable stability of this catalyst, with about 74.4% of RhB degradation still present after seven consecutive cycles. Scavenger experiments highlighted the crucial role of •OH radicals in the photodecomposition mechanism, as the incorporation of DMSO significantly influenced the photocatalytic efficiency of the 13BOSBS composite, leading to a notable decrease to 37.5% in RhB degradation. For the RhB dye, the 13BOSBS catalyst demonstrated remarkable 90.2% and 85% reductions in COD and TOC, respectively. The commercially available TC powder substantially reduced 84% in COD and 80% in TOC, whereas there was a 78% reduction in COD and 73% in TOC for TC tablets. The degradation of the contaminants was followed by the formation of simpler intermediates, which were discovered using the GC-MS approach. Owing to its excellent attributes and simple synthesis method, the fabricated heterojunction offers a promising solution to prevent the persistent buildup of harmful toxic pollutants in industrial wastewater systems.

Single-atom Zr embedded Ti4O7 anode coupling with hierarchical CuFe2O4 particle electrodes toward efficient electrooxidation of actual pharmaceutical wastewater

Electrocatalytic oxidation is commonly restricted by low degradation efficiency, slow mass transfer, and high energy consumption. Herein, a synergetic electrocatalysis system was developed for removal of various drugs, i.e., atenolol, florfenicol, and diclofenac sodium, as well as actual pharmaceutical wastewater, where the newly-designed single-atom Zr embedded Ti4O7 (Zr/Ti4O7) and hierarchical CuFe2O4 (CFO) microspheres were used as anode and microelectrodes, respectively. In the optimal reaction system, the degradation efficiencies of 40 mg L-1 atenolol, florfenicol, and diclofenac sodium could achieve up to 98.8%, 93.4%, and 85.5% in 120 min with 0.1 g L-1 CFO at current density of 25 mA cm-2. More importantly, in the flow-through reactor, the electrooxidation lasting for 150 min could reduce the COD of actual pharmaceutical wastewater from 432 to 88.6 mg L-1, with a lower energy consumption (25.67 kWh/m3). Meanwhile, the electrooxidation system maintained superior stability and environmental adaptability. DFT theory calculations revealed that the excellent performance of this electrooxidation system could be ascribed to the striking features of the reduced reaction energy barrier by single-atom Zr loading and abundant oxygen vacancies on the Zr/Ti4O7 surface. Moreover, the characterization and experimental results demonstrated that the CFO unique hierarchical structure and synergistic effect between electrodes were also the important factors that could improve the system performance. The findings shed light on the single-atom material design for boosting electrochemical oxidation performance.

Optimization of Visible-Light-Driven Ciprofloxacin Degradation Using a Z-Scheme Semiconductor MgFe2O4/UiO-67

A heterogeneous photocatalyst, MgFe2O4/UiO-67 (MU-x), was successfully synthesized by doping magnetic magnesium ferrite nanoparticles (MgFe2O4) with the UiO-67 metal-organic framework at various weight ratios (MgFe2O4: UiO-67 at 30, 50, 70, and 90 wt %). Various techniques, including X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectroscopy (FT-IR) , Brunauer-Emmett-Teller (BET), photoluminescence (PL), vibrating sample magnetometry (VSM), electrochemical impedance spectroscopy (EIS), and ultraviolet-visible diffuse reflectance spectroscopy (UV-vis DRS), were used to characterize the prepared photocatalysts. The photocatalytic performance of MU-x in the degradation of ciprofloxacin (CIP) under visible light was assessed. The CIP degradation efficiency was found to increase as the amount of MgFe2O4 in the composite was increased up to 70 wt %. Experimental conditions were optimized using response surface methodology (RSM) based on central composite design (CCD) with three factors: initial pH, catalyst loading, and CIP concentration. Using the obtained model, the optimal conditions were determined as follows: initial pH of 8.025, catalyst loading of 33.8 wt %, and CIP concentration of 10.8 mg/L. Under these optimal conditions, a notable improvement was achieved, with 99.62% of CIP removal achieved within 90 min, surpassing the performance of previously reported photocatalysts. Total organic carbon (TOC) analysis revealed a high degree of mineralization, at 81.25%. The degradation pathway of CIP was investigated based on liquid chromatography-mass spectrometry (LC-MS) analysis. Finally, the values of ECB and EVB of the photocatalyst were determined and the possible degradation mechanism of CIP was investigated based on Mott-Schottky and the applied scavengers. The hydroxyl radical (•OH) was identified as the dominant species in the removal of CIP through a trapping experiment. The photocatalyst with 70 wt % of MgFe2O4 (MU-70) exhibited excellent stability and recoverability with an external magnet, demonstrating 86.33% CIP removal after four cycles. According to the obtained results, MU-70 is a promising visible-light-active photocatalyst with great potential for water treatment applications and convenient recovery.

Photocatalytic degradation of bisphenol A by temperature-sensitive magnetic hydrogel with enhanced service life

Easy diffusion and low reusability limit the practicality of photocatalysts. In this study, a hollow sphere (HS) heterojunction was synthesized based on oxygen-doped carbon nitride (OCN) and layered double hydroxides (LDHs). A thermosensitive HS hydrogel (HS Gel) was prepared by mixing HS with N-isopropylacrylamide. Bisphenol A (BPA), being widely manufactured and used in commercial and domestical products and its high toxicity, was chosen as the target pollutant to demonstrate the photocatalytic ability and practicality of the HS Gel. HS Gel presented effective BPA degradation (95% degradation in 70 mins, 4.2 × 10-2 min-1 of kobs) at ambient temperature which is much better than kobs = 1.8 × 10-2 min-1 of OCN and kobs = 0.08 × 10-2 min-1 of LDH), and increased by two-fold the recycling service life (retention of >80% degradation efficiency after 13 usage cycles) compared to other carbon-based photocatalysts (retention of >80% degradation efficiency after 5-6 usage cycles). This is due to its multifunctional characteristics (magnetic property and thermal sensitivity). Under ambient temperature, the hydrophilic HS Gel swelled in the aqueous solution, which promoted the photocatalytic reaction between HS and BPA in the gel state. After the reaction, the HS Gel was subjected to shrinkage by high temperature heating to enhance the mechanical strength for recovery. The magnetic recovery was realized by the paramagnetic properties of layered double oxide to reduce environmental interference. Detailed studies of HS gel related to enhanced service life were conducted including structural changes, catalyst leaking and magnetic changing. A new kind of type Ӏ plus Z-scheme mechanism was also proposed based on the Kubelka-Munk equation, UV diffuse reflectance spectroscopy and Mott-Schotty technique.

In situ preparation of MOF-199 into the carrageenan-grafted-polyacrylamide@Fe3O4 matrix for enhanced adsorption of levofloxacin and cefixime antibiotics from water

In this research study, a novel method, an in-situ growth approach, to incorporate metal-organic framework (MOF) into carrageenan-grafted- polyacrylamide-Fe3O4 substrate was introduced. Carrageenan-grafted-polyacrylamide-Fe3O4/MOF nanocomposite (kC-g-PAAm@Fe3O4-MOF-199) was fabricated utilizing three stages. In this way, the polyacrylamide (PAAm) was grafted onto the carrageenan (kC) backbone via free radical polymerization in the presence of methylene bisacrylamide (MBA) as cross-linker and Fe3O4 magnetic nanoparticles. Next, the kC-g-PAAm@Fe3O4 was modified by MOF-199 via an in-situ solvothermal approach. Several analyses such as Fourier transform infrared spectroscopy (FT-IR), X-Ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy-Dispersive X-ray Spectroscopy (EDX), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), Brunauer-Emmett-Teller (BET) demonstrated the successful synthesis of kC-g-PAAm@Fe3O4-MOF-199 magnetic hydrogel nanocomposite. The XRD pattern of magnetic hydrogel nanocomposite illustrated characteristic peaks of Fe3O4, neat kC, and MOF-199 with enhanced crystallinity in comparison with kC-g-PAAm@Fe3O4. TGA showed it has a char yield of 24 wt% at 800 °C. VSM confirmed its superparamagnetic behavior (with Ms of 8.04 emu g-1), and the BET surface area of kC-g-PAAm@Fe3O4-MOF-199 was measured at 64.864 m2 g-1, which was higher than that of kC-g-PAAm@Fe3O4 due to the highly porous MOF-199 incorporation with a BET surface area of 905.12 m2 g-1). The adsorption effectiveness of kC-g-PAAm@Fe3O4-MOF-199 for eliminating cephalosporin and quinolones antibiotics, i.e., Cefixime (CFX) and Levofloxacin (LEV) from the aquatic area was considered. Several experimental setups were used to evaluate the efficacy of adsorption, such as solution pH, amount of adsorbent, contact duration, and initial concentration. The maximum adsorption capacity (Qmax) of the prepared magnetic hydrogel nanocomposite was found to be 2000 and 1666.667 mg-1 for LEV and CFX using employing 0.0025 g of adsorbent. The Freundlich isotherm model well described the experimental adsorption data with R2CFX = 0.9986, and R2LEV = 0.9939. And the adsorption kinetic data were successfully represented by the pseudo-second-order model with R2LEV = 0.9949 and R2CFX = 0.9906. Hydrogen bonding, π-π interaction, diffusion, and entrapment in the hydrogel network all contributed to the successful adsorption of both antibiotics onto the kC-g-PAAm@Fe3O4-MOF-199 adsorbent. Other notable physicochemical properties include the three-dimensional structure and availability of the reactive adsorption sites. Moreover, the adsorption/desorption efficacy of magnetic hydrogel nanocomposites was not significantly diminished after four cycles of recovery.

Spinel cobalt ferrite-based porous activated carbon in conjunction with UV light irradiation for boosting peroxymonosulfate oxidation of bisphenol A

Developing heterogeneous catalysts with high performance for peroxymonosulfate (PMS) activation to decontaminate organic pollutants from wastewater is of prominent importance. In this study, spinel cobalt ferrite (CoFe₂O₄) materials were coated on the surface of powdered activated carbon (CoFe₂O₄@PAC) via the facile co-precipitation method. The high specific surface area of PAC was beneficial for the adsorption of both bisphenol A (BP-A) and PMS molecules. The CoFe₂O₄@PAC-mediated PMS activation process under UV light could effectively eliminate 99.4% of the BP-A within 60 min of reaction. A significant synergy effect was attained between CoFe₂O₄ and PAC towards PMS activation and subsequent elimination of BP-A. Comparative tests demonstrated that the heterogeneous CoFe₂O₄@PAC catalyst had a better degradation performance in comparison with its components and homogeneous catalysts (Fe, Co, and, Fe + Co ions). The formed by-products and intermediates during BP-A decontamination were evaluated using LC/MS analysis, and then a possible degradation pathway was proposed. Moreover, the prepared catalyst exhibited excellent performance in recyclability with slight leaching amounts of Co and Fe ions. A TOC conversion of 38% was obtained after five consecutive reaction cycles. It can be concluded that the PMS photo-activation process via the CoFe₂O₄@PAC catalyst can be utilized as an effective and promising method for the degradation of organic contaminants from polluted-water resources.

Solar-light-driven photocatalytic degradation of pharmaceutical pollutants utilizing 2D g-C3N4/BiOCl composite

Pharmaceuticals, which have been praised for protecting countless lives, have become a new category of environmental pollutants in recent decades as most of these pharmaceutical compounds are discovered in water bodies in concentrations ranging from ng/L to mg/L. Recently, metal-free g-C₃N₄ (GCN)-based composites have received considerable attention for the degradation of pharmaceutical compounds. In this study, GCN/BiOCl composite was prepared using a simple ultrasonication-assisted stirring method and characterized using various analytical and spectroscopic techniques including XRD, FTIR, PL, Elemental mapping, UV-DRS, FESEM, HRTEM, and TGA. The as-prepared composite was utilized to degrade levofloxacin (LVX) under solar light irradiation and showed excellent stability for the degradation of LVX. Furthermore, the universality of the GCN/BiOCl composite was investigated by degrading diverse pharmaceuticals such as ofloxacin (OFX), norfloxacin (NOX), ciprofloxacin (COX), and ketorolac tromethamine (KTC) in an aqueous phase. Therefore, this work provides an effective method to degrade pharmaceutical contaminants simultaneously in water using GCN/BiOCl composite.

Degradation of levofloxacin in wastewater by photoelectric and ultrasonic synergy with TiO2/g-C3N4@AC combined electrode

A novel particle combined electrode named TiO₂/g-C₃N₄@AC (TGCN-AC) was prepared by loading TiO₂ and g-C₃N₄ on activated carbon through gel method, which was used to degrade levofloxacin (LEF) in pharmaceutical wastewater by photoelectric process. The remarkable physicochemical features of particle electrodes were verified by using diverse characterization techniques including SEM-EDS, XRD, FT-IR, BET and pH_ZPC. EIS-CV and photocurrent showed excellent electrocatalysis and photoelectrocatalysis performance of particle electrodes. The photocatalytic characteristics and fluorescence properties of the particle electrode were proved by UV-vis DRS and PL spectra measurements. Combined with Tauc's plot and Mott-Schottky plots curves, the E_CB and E_VB of particle electrodes were determined. The experiments on different influence factors such as pH, ultrasonic, aeration, current density and the concentration of LEF were carried out in the photoelectric reactor. Under the conditions of pH values 3.0, 200 W ultrasonic, 8 L/min aeration, the mass ratio of g-C₃N₄ and TiO₂ is 8%, after 4.0 h of photoelectric process, about 94.76% of LEF (20 mg/L) in water was degraded. TGCN-AC also has excellent reusability. The degradation rate of LEF can still reach 71.17% after repeated use for 6 times. Scavenger studies showed that h⁺ and O^2- were the main active species. By observing the colony size of E. coli, it was proved that the LEF in the effluent had no antibacterial activity. The degradation pathways of LEF was analyzed and drawn by HPLC-MS spectra.

SnO2 and CuO anchored on zeolite as an efficient heterojunction photocatalyst for sunlight-assisted degradation of cefixime

The fabrication of heterojunction nanocomposites has been proven as a highly efficient strategy to achieve promising photocatalysts. In this study, tin oxide (SnO₂) and copper oxide (CuO) nanoparticles (NPs) were synthesized in situ using Rosmarinus officinalis and simultaneously anchored on zeolite for the fabrication of zeolite/SnO₂/CuO as a novel heterojunction photocatalyst. The performance of zeolite/SnO₂/CuO was assessed against photodegradation of cefixime as a model pharmaceutical contaminant. A good catalytic potential and synergistic effect was obtained for zeolite/SnO₂/CuO compared to pure SnO₂ and CuO NPs. Under optimum conditions, 89.65% of cefixime was degraded after 2.5 h under natural sunlight. Based on radical quenching experiments, the importance of involved oxidizing species in the photodegradation of cefixime using zeolite/SnO₂/CuO was in order of h⁺ > ^•OH > [Formula: see text]. Among studied anions, the highest inhibitory effect was observed for nitrate ion. Also, the main intermediates of the photodegradation process of cefixime in zeolite/SnO₂/CuO system were determined by HPLC-MS and the possible pathways were suggested. More than 83% cefixime was removed after three catalyst reuse cycles, indicating a cost-effectiveness potential in the reusability of zeolite/SnO₂/CuO. Also, the toxicity and plant growth tests revealed the feasibility of discharging the treated cefixime solutions to irrigate agricultural crops. Overall, the obtained results provide a promising technique with a synergistic feature for the efficient removal of organic pollutants.

Exploring the visible light-assisted conversion of CO2 into methane and methanol, using direct Z-scheme TiO2@g-C3N4 nanosheets: synthesis and photocatalytic performance

The rapid growth of carbon dioxide (CO₂) emissions raises concern about the possible consequences of atmospheric CO₂ increase, such as global warming and greenhouse effect. Photocatalytic CO₂ conversion has attracted researchers' interests to find a sustainable route for its elimination. In the present study, a direct Z-scheme TiO₂/g-C₃N₄ composite (T-GCN) was fabricated via a facile hydrothermal route for the photocatalytic reduction of CO₂ into methane (CH₄) and methanol (CH₃OH), under visible light irradiation without an electron mediator. The microstructure of the as-obtained TiO₂/g-C₃N₄ nanocomposites was fully characterized for its physicochemical, structural, charge separation, electronic, and photo-excited carrier separation properties. The effect of CO₂ and H₂O partial pressure was studied to find the best operational conditions for obtaining maximum photocatalytic efficiency; the P_CO2 and P_H2O were 75.8 and 15.5 kPa, respectively, whereas, by increasing the light intensity from 20 to 80 mW/cm², a remarkable improvement in the reduction rate takes place (from 11.04 to 32.49 μmol.gcat^-1.h^-1 methane production, respectively). Finally, under the most favorable light, P_CO2 and P_H2O conditions, high methanol and methane rates were obtained from the CO₂ photocatalytic reduction through T-GCN (1.44 μmol.gcat.^-1.h^-1 and 32.49 μmol.gcat.^-1.h^-1, respectively) and an integrated proposition for the Z-scheme mechanism of photocatalytic reduction was proposed. This study offers a promising strategy to synthesize a Z-scheme T-GCN heterojunction with high photocatalytic performance for effective CO₂ conversion.

Outlook on bismuth-based photocatalysts for environmental applications: A specific emphasis on Z-scheme mechanisms

Semiconductor photocatalysis is thought to be a viable solution for addressing the growing problem of environmental pollution. Bismuth (Bi) metal oxides can function as a direct plasmonic photocatalyst or cocatalyst to accelerate the photogenerated charge separation and thus improve their photocatalytic activity. Hence, Bi-based photocatalysts have received a lot of attention due to their extensive environmental applications, including pollutant remediation and energy concepts. Massive efforts have been undertaken in the recent decade to find superior Bi-metal oxides (Bi₂XO_6, X = MO, W, or Cr) and to uncover the corresponding photocatalytic reaction mechanism for the degradation of organic contaminants in water. Herein, the unique crystalline and electronic properties and main synthesis methods, as well as the major Bi-Based direct Z-scheme photocatalysts, are timely discussed and summarized in their usage in water treatment. Besides, the impact of Bi₂XO₆ in energy storage devices and solar energy conversion is reviewed as an energy application. Finally, the future development and challenges of Z-scheme-based Bi₂XO₆ photocatalysts are briefly explored, summarized, and forecasted.

Activation of persulfate by a water falling film DBD process for the enhancement of enrofloxacin degradation

A synergetic system of water falling film dielectric barrier discharge (DBD) plasma and persulfate (PS) was established and applied to enhance the enrofloxacin (EFA) degradation in this study. The simultaneous existence of electrons, reactive species, heat and UV-visible light in the DBD plasma system were utilized together to activate the PS to form SO₄^-· and other reactive oxygen species (ROS), and then worked in synergy with the DBD plasma to oxidize the EFA. The obtained results verified that there was a significant increase in the degradation percentages of EFA (20 mg L^-1) in the DBD/PS system, and the trend was more obvious under the condition of larger discharge power input. When 0.8 mM PS was added into the DBD system with 0.8 kW discharge power, the degradation percentage of EFA could reach 99.35% after 60 min treatment, the corresponding synergetic factor (SF) was 7.94. Analysis of the O₃ and the H₂O₂ concentrations in the DBD plasma system before and after the PS addition explained the activation of the PS by the HO·. The quenching experiments on reactive species suggested that SO4^-·, HO·, and ¹O₂ were all important reactive species for EFA degradation. The intermediates formed by the EFA degradation were detected and the degradation pathways were speculated. Results of toxicity analysis illustrated that the toxicity of the initial EFA solution decreased after degradation in the synergetic system of DBD/PS.

Ultrasonic treatment enhances the formation of oxygen vacancies and trivalent manganese on α-MnO2 surfaces: Mechanism and application

Catalytic activity is the main obstacle limiting the application of peroxymonosulfate (PMS) activation on transition metal oxide catalysts in organic pollutant removal. Herein, ultrasonic treatment was applied to α-MnO₂ to fabricate a new u-α-MnO₂ catalyst for PMS activation. Dimethyl phthalate (DMP, 10 mg/L) was almost completely degraded within 90 min, and the pseudofirst-order rate constant for DMP degradation in the u-α-MnO₂/PMS system was ∼7 times that in the initial α-MnO₂/PMS system. The ultrasonic treatment altered the crystalline and pore structures of α-MnO₂ and produced defects on the u-α-MnO₂ catalyst. According to the XPS, TG, and EPR results, higher contents of trivalent Mn and oxygen vacancies (OVs) were produced on the catalyst surfaces. The OVs induced the decomposition of PMS to produce ¹O₂, which was identified as the main reactive oxygen species (ROS) responsible for DMP degradation. The u-α-MnO₂ catalyst presented great reusability, especially by ultrasonic regeneration of OVs toward the used catalyst. This study provides new insights into regulating OVs generation and strengthening catalyst activity in the PMS activation process for its application in water purification.

A Comprehensive Review of Graphitic Carbon Nitride (g-C3N4)-Metal Oxide-Based Nanocomposites: Potential for Photocatalysis and Sensing

g-C3N4 has drawn lots of attention due to its photocatalytic activity, low-cost and facile synthesis, and interesting layered structure. However, to improve some of the properties of g-C3N4, such as photochemical stability, electrical band structure, and to decrease charge recombination rate, and towards effective light-harvesting, g-C3N4-metal oxide-based heterojunctions have been introduced. In this review, we initially discussed the preparation, modification, and physical properties of the g-C3N4 and then, we discussed the combination of g-C3N4 with various metal oxides such as TiO2, ZnO, FeO, Fe2O3, Fe3O4, WO3, SnO, SnO2, etc. We summarized some of their characteristic properties of these heterojunctions, their optical features, photocatalytic performance, and electrical band edge positions. This review covers recent advances, including applications in water splitting, CO2 reduction, and photodegradation of organic pollutants, sensors, bacterial disinfection, and supercapacitors. We show that metal oxides can improve the efficiency of the bare g-C3N4 to make the composites suitable for a wide range of applications. Finally, this review provides some perspectives, limitations, and challenges in investigation of g-C3N4-metal-oxide-based heterojunctions.