Electrochemical degradation of PFOA and its common alternatives: Assessment of key parameters, roles of active species, and transformation pathway

Study on the performance and mechanism of a p-n type In2O3/BiOCl heterojunction prepared using a sacrificial MOF framework for the degradation of PFOA

In this study, an In2O3/BiOCl p-n heterojunction was prepared using a co-calcination method. By utilising the built-in electric field formed near the heterojunction interface, photoinduced electron-hole pairs can be effectively separated, thereby enhancing the photocatalytic activity of the photocatalyst. Experimental results indicate that the p-n heterojunction photocatalyst significantly enhanced photocatalytic activity in the degradation of PFOA under UV light irradiation. Within 2 h, the defluorination rate of PFOA achieved by the heterojunction photocatalyst reached 84.01%, while the pure BiOCl and In2O3 photocatalysts exhibit defluorination rates of 61.82% and 56.69%, respectively. The degradation mechanism of PFOA was studied through free radical capture experiments, VB-XPS, FT-IR, and LC-MS. Mechanistic studies show that the main active substances in the heterojunction are holes (h+) and superoxide radicals (˙O2 -). The holes in the valence band of In2O3 are transferred to BiOCl under the effect of the built-in electric field, and the defluorination of PFOA mainly occurs on the BiOCl component of the heterojunction. This highlights the superiority of heterojunctions over pure photocatalysts in terms of their photocatalytic efficiency and provides insights into the photocatalytic degradation mechanism of PFOA.

Per-and polyfluoroalkyl degradation in a hybrid dielectric barrier discharge plasma and electrooxidation system through involving more reactive species by air and water circulation

The presence of PFAS in water matrices has become a global environmental issue in the last half-century. Dielectric barrier discharge (DBD) and electrooxidation (EO) showed potential for PFAS degradation but have yet to find practical application due to relatively high energy consumption. In this study, a hybrid DBD-EO system for efficient degradation of PFAS was developed by involving more reactive oxygen, sulfate radicals (SO4•-) and nitrogen species (RONS). The results showed that using the hybrid DBD-EO system under optimal conditions (applied voltage = 6 kV and current density = 7.5 mA/cm2) could increase PFOA degradation efficiency from 65.0 % (DBD) and 62.5 % (EO) to 89.14 %. While the EE/O decreased from 67.0 kWh/m3 (DBD) and 47.82 kWh/m3 (EO) to 21.61 kWh/m3. In addition, the effect of operational parameters and water matrices revealed that the hybrid DBD-EO system had high potential for PFOA removal from water under various conditions. According to the EPR and DFT calculation results, integration of reactive species in EO (SO4•-, •OH, O2•-) and ONOOH) and DBD (•OH, O2•-, NO2•-, 1O2 and ONOOH) processes in the DBD-EO system led to efficient degradation of PFOA through a mechanism of decarboxylation/defluorination cycle. Our findings suggested the combination of DBD and EO is a promising approach for complete degradation of PFAS from water with low energy consumption and minimal environmental side effects.

Optimizing electrochemical removal of perfluorooctanoic acid in landfill leachate using ceramic carbon foam electrodes by coupling CFD simulation and reactor design

Perfluorooctanoic acid (PFOA), a persistent and bioaccumulative pollutant classified as a 'forever chemical', poses a global environmental and health risk due to its widespread use and resistance to degradation. The development of effective and efficient removal technologies is crucial to mitigate its long-term impacts. In this study, we present a novel approach to address the growing concern of emerging contaminants, particularly PFOA, in landfill leachate. We investigate the use of ceramic carbon foam electrodes (CCFE) as a cost-effective and efficient alternative to traditional electrode materials for the electrochemical degradation of PFOA. Computed microtomography was used to reconstruct the actual three-dimensional geometries of the samples from which porosities were calculated. We also coupled computational fluid dynamics simulations of the actual geometries and optimized the working conditions to minimize pressure drop and improve treatment efficiency. Our design significantly reduces energy requirements by operating at lower potentials, a critical factor in sustainable waste management practices. The optimized CCFE system demonstrated superior performance in the degradation of PFOA in landfill leachate, offering a promising solution for the treatment of emerging contaminants. This study not only provides a viable method for mitigating the environmental impact of PFOA but also sets a precedent for the development of low-energy, high-efficiency treatment technologies for various persistent pollutants. In addition, the proposed solution, as part of closed-loop water systems, will enhance water reuse and recycling, thereby preserving and regenerating natural water bodies.

Systematic review of various activation methods of sulfate radical precursor for the degradation of PFAS in aquatic environments

PER: and polyfluoroalkyl substance (PFAS), widely used in industrial production, pose significant environmental and health risks due to their stability and persistence. Recent research has highlighted the potential of sulfate radicals for degrading PFAS through the activation of precursors like peroxymonosulfate (PMS) and persulfate (PS) in oxidation processes. The present study systematically reviews various activation methods and corresponding efficiencies in removing PFAS in thermal, ultrasonic, photochemical, catalytic, and electrochemical processes. The review also explores the impact of pH, temperature, precursor concentration, and co-contaminants, on PFAS degradation efficiency. Additionally, it investigates the degradation mechanisms, including defluorination and carbon-carbon bond cleavage, providing insights into the pathways of PFAS breakdown. Despite the promising results, challenges remain on the potential formation of toxic by-products and the energy demands of activation methods. Addressing these issues may involve developing more efficient catalysts, optimizing conditions, and combining treatment processes. This review offers valuable insights for researchers and practitioners, contributing to the advancement of PFAS remediation strategies and ultimately protecting human health and the environment from these persistent pollutants.

Integrating kinetic modeling and experimental insights: PFAS electrochemical degradation in concentrated streams with a focus on organic and inorganic effects

This study investigated the impact of organic and inorganic constituents on electrochemical degradation of per- and poly-fluoroalkyl substances (PFAS) in a sulfate-based brine from regeneration of spent ion exchange (IX) resin. The system's performance was assessed in the presence of natural organic matter (NOM) and common inorganic constituents: chloride, nitrate, and bicarbonate. Results revealed distinct outcomes based on constituent type, concentration, and specific PFAS variant. NOM hindered PFAS decomposition, especially for more hydrophobic compounds. Chloride reduced degradation and defluorination efficiencies through competitive interactions with PFAS for the anode's active sites and scavenging effects on SO4•- and •OH. Nitrate and bicarbonate minimally impacted degradation but significantly reduced defluorination. Investigating the electrochemical process in real brine solutions showed higher efficiency and lower electrical energy consumption when methanol was distilled, as methanol scavenges reactive radicals and competes for active anode sites. A kinetic model was also developed to determine the direct electron transfer (DET) and mass transfer coefficients for the species present, considering both surface and bulk solution interactions. The model predicted mass transfer (mol m-2 s-1) and DET (m2 mol-1 s-1) coefficients of 6:2 FTCA, PFOA, GenX, and PFBA to be (5.0 ×10-10, 3.7 ×1011), (1.0 ×10-9, 8.0 ×108), (6.0 ×10-8, 7.5 ×108), and (6.2 ×10-8, 4.2 ×108), respectively.

Nano- and Micro-SiO2 With Integrated Green Chemistry-Based Superhydrophobic Coating for Robust Antifouling and Anticorrosion Properties

With increasing energy demands, the need for coating materials with exceptional superhydrophobic properties has grown substantially. However, the widespread use of fluorinated compounds, solvents, and polymer-based synthetic materials has led to heightened levels of microplastics and pollutants. Here, we used a self-curing, solvent-free, and recyclable polyester polyol polymer material combined with (5 and 6.5 μm) micro- and nanosized SiO2 (μ-SiO2 and n-SiO2) particles to create superhydrophobic coatings with contact angles above 170° and low roll-off angle. They were applied for self-cleaning, antifouling, and anticorrosion purposes and tested for stability in hot water, steam, and ultrasound. Both μ-SiO2 particles mixed with n-SiO2 exhibited excellent improvement in antifouling properties. Furthermore, 5 μm SiO2 incorporated with n-SiO2 demonstrated significantly higher resistance in a 62-cycle sandpaper abrasion test and maintained a contact angle above 150°, whereas this angle was lower for the 6.5 μm SiO2 coating after 30 cycles. These results suggest that 6.5 μm SiO2 offers less resistance to applied force due to its irregular roughness. However, in scenarios with lower forces, such as water drop tests, both coatings easily withstand a drop count of 3000. Additionally, electrochemical polarization curve analysis, AC impedance analysis, and seawater immersion tests confirmed the robust corrosion resistance of the superhydrophobic material.

The impact of anions on electrooxidation of perfluoroalkyl acids by porous Magnéli phase titanium suboxide anodes

Previous studies have indicated the great performance of electrooxidation (EO) to mineralize per- and polyfluoroalkyl substances (PFASs) in water, but different anions presented in wastewater may affect the implementation of EO treatment in field applications. This study invetigated EO treatment of perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA), two representative perfluoroalkyl acids (PFAAs), using porous Magnéli phase titanium suboxide anodes in electrolyte solutions with different anions present, including NO3-, SO42-, CO32- and PO43-. The experiment results indicate that CO32- enhanced PFAS degradation, while NO3- suppressed the degradation reactions with its concentration higher than 10 mM. SO42- and PO43- exhibited less impact. Further studies with electrochemical characterizations and radical quenching experiments illustrate the mechanisms of how the anions may impact EO performance.

Perfluorooctanoic Acids (PFOA) removal using electrochemical oxidation: A machine learning approach

The urgent need to eliminate Perfluorooctanoic Acid (PFOA) has positioned electrooxidation (EO) as a key solution for pollutant degradation. This study evaluates several machine learning (ML) models, including K-Nearest Neighbors (KNN), Decision Tree (DT), Random Forest (RF), Gradient Boosted Decision Trees (GBDT), and Deep Learning (DL), to predict EO efficiency in PFOA removal. Using 10-fold cross-validation, the RF model outperformed others with a root mean square error (RMSE) of 7.7 and a correlation coefficient of 0.965, demonstrating its robustness and accuracy across diverse operational settings. Feature importance within the RF model was analyzed using Gini impurity and Mean Decrease in Accuracy (MDA). Electrolysis Time consistently emerged as the most influential factor in both analyses, underscoring its pivotal role in providing extended exposure of PFOA molecules to reactive species at the electrode surfaces. The study also found strong agreement between Gini and MDA in identifying Current Density and Anode Material as critical factors, although MDA placed slightly more emphasis on Anode Material. Differences between Gini and MDA were more pronounced in the ranking of Electrolyte Type and Concentration, with MDA assigning higher importance to Electrolyte Concentration. In contrast, the Water Matrix was consistently ranked as the least important factor. The strong concordance between Gini and MDA highlights the reliability of the RF model in identifying key drivers of electrochemical degradation. Overall, this work contributes significantly to the advancement of pollutant degradation technologies, presenting a reliable ML-based tool for environmental remediation efforts.

Insights into water insecurity in Indigenous communities in Canada: assessing microbial risks and innovative solutions, a multifaceted review

Canada is considered a freshwater-rich country, despite this, several Indigenous reserves struggle with household water insecurity. In fact, some of these communities have lacked access to safe water for almost 30 years. Water quality in Canadian Indigenous reserves is influenced by several factors including source water quality, drinking water treatments applied, water distribution systems, and water storage tanks when piped water is unavailable. The objective of this multifaceted review is to spot the challenges and consequences of inadequate drinking water systems (DWS) and the available technical and microbiological alternatives to address water sanitation coverage in Indigenous reserves of Canada, North America (also known as Turtle Island). A comprehensive literature review was conducted using national web portals from both federal and provincial governments, as well as academic databases to identify the following topics: The status of water insecurity in Indigenous communities across Canada; Microbiological, chemical, and natural causes contributing to water insecurity; Limitations of applying urban-style drinking water systems in Indigenous reserves in Canada and the management of DWS for Indigenous communities in other high-income countries; and the importance of determining the microbiome inhabiting drinking water systems along with the cutting-edge technology available for its analysis. A total of 169 scientific articles matched the inclusion criteria. The major themes discussed include: The status of water insecurity and water advisories in Canada; the risks of pathogenic microorganisms (i.e., Escherichia coli and total coliforms) and other chemicals (i.e., disinfection by-products) found in water storage tanks; the most common technologies available for water treatment including coagulation, high- and low-pressure membrane filtration procedures, ozone, ion exchange, and biological ion exchange and their limitations when applying them in remote Indigenous communities. Furthermore, we reviewed the benefits and drawbacks that high throughput tools such as metagenomics (the study of genomes of microbial communities), culturomics (a high-efficiency culture approach), and microfluidics devices (microminiaturized instruments) and what they could represent for water monitoring in Indigenous reserves. This multifaceted review demonstrates that water insecurity in Canada is a reflection of the institutional structures of marginalization that persist in the country and other parts of Turtle Island. DWS on Indigenous reserves are in urgent need of upgrades. Source water protection, and drinking water monitoring plus a comprehensive design of culturally adapted, and sustainable water services are required. Collaborative efforts between First Nations authorities and federal, provincial, and territorial governments are imperative to ensure equitable access to safe drinking water in Indigenous reserves.

Rethinking alternatives to fluorinated pops in aqueous environment and corresponding destructive treatment strategies

Alternatives are being developed to replace fluorinated persistent organic pollutants (POPs) listed in the Stockholm Convention, bypass environmental regulations, and overcome environmental risks. However, the extensive usage of fluorinated POPs alternatives has revealed potential risks such as high exposure levels, long-range transport properties, and physiological toxicity. Therefore, it is imperative to rethink the alternatives and their treatment technologies. This review aims to consider the existing destructive technologies for completely eliminating fluorinated POPs alternatives from the earth based on the updated classification and risks overview. Herein, the types of common alternatives were renewed and categorized, and their risks to the environment and organisms were concluded. The efficiency, effectiveness, energy utilization, sustainability, and cost of various degradation technologies in the treatment of fluorinated POPs alternatives were reviewed and evaluated. Meanwhile, the reaction mechanisms of different fluorinated POPs alternatives are systematically generalized, and the correlation between the structure of alternatives and the degradation characteristics was discussed, providing mechanistic insights for their removal from the environment. Overall, the review supplies a theoretical foundation and reference for the control and treatment of fluorinated POPs alternatives pollution.

Enhanced perfluorooctanoic acid (PFOA) degradation by electrochemical activation of peroxydisulfate (PDS) during electrooxidation for water treatment

Improved treatment of per- and polyfluoroalkyl substances (PFAS) in water is critically important in light of the proposed United States Environmental Protection Agency (USEPA) drinking water regulations at ng L-1 levels. The addition of peroxymonosulfate (PMS) during electrooxidation (EO) can remove and destroy PFAS, but ng L-1 levels have not been tested, and PMS itself can be toxic. The objective of this research was to test peroxydisulfate (PDS, an alternative to PMS) activation by boron-doped diamond (BDD) electrodes for perfluorooctanoic acid (PFOA) degradation. The influence of PDS concentration, temperature, and environmental water matrix effects, and PFOA concentration on PDS-EO performance were systematically examined. Batch reactor experiments revealed that 99 % of PFOA was degraded and 69 % defluorination was achieved, confirming PFOA mineralization. Scavenging experiments implied that sulfate radicals (SO4-) and hydroxyl radicals (HO) played a more important role for PFOA degradation than 1O2 or electrons (e-). Further identification of PFOA degradation and transformation products by liquid chromatography-mass spectrometry (LC-MS) analysis established plausible PFOA degradation pathways. The analysis corroborates that direct electron transfers at the electrode initiate PFOA oxidation and SO4- improves overall treatment by cleaving the CC bond between the C7F15 and COOH moieties in PFOA, leading to possible products such as C7F15 and F-. The perfluoroalkyl radicals can be oxidized by SO4- and HO, resulting in the formation of shorter chain perfluorocarboxylic acids (e.g., perfluorobutanoic acid [PFBA]), with eventual mineralization to CO2 and F-. At an environmentally relevant low initial concentration of 100 ng L-1 PFOA, 99 % degradation was achieved. The degradation of PFOA was slightly affected by the water matrix as less removal was observed in an environmental river water sample (91 %) compared to tests conducted in Milli-Q water (99 %). Overall, EO with PDS provided a destructive approach for the elimination of PFOA.

Effect of electrolyte composition on electrocatalytic transformation of perfluorooctanoic acid (PFOA) in high pH medium

Recent regulatory actions aim to limit per- and polyfluoroalkyl substances (PFAS) concentrations in drinking water and wastewaters. Regenerable anion exchange resin (AER) is an effective separation process to remove PFAS from water but will require PFAS post-treatment of the regeneration wastestream. Electrocatalytic (EC) processes using chemically boron-doped diamond electrodes, stable in a wide range of chemical compositions show potential to defluorinate PFOA in drinking water and wastewater treatments. Chemical composition and concentration of mineral salts in supporting electrolytes affect AER regeneration efficiency, and play a crucial role in the EC processes. Their impact on PFAS degradation remains understudied. This study investigates the impact of 17 brine electrolytes with different compositions on perfluorooctanoic acid (PFOA) degradation in an alkaline medium and explores the correlation between the rate of PFOA degradation and the solution's conductivity. Results show that higher electrolyte concentrations and conductivity lead to faster PFOA degradation rates. The presence of chloride anions have negligible impact on the degradation rate. However, the presence of nitrate salts reduce PFOA degradation efficiency. Additionally, the use of mixed electrolytes may be a promising approach for reducing the cost of EC operations. PFOA degradation was not influenced by the pH of the bulk solution.

Comparative study on Perfluoro(2-methyl-3-oxahexanoic) acid removal by quaternary ammonium functionalized silica gel and granular activated carbon from batch and column experiments and molecular simulation-based interpretation

Removing perfluoro(2-methyl-3-oxahexanoic) acid (HFPO-DA) in water treatment is hindered by its hydrophobicity and negative charge. Two adsorbents, quaternary-ammonium-functionalized silica gel (Qgel), specifically designed for anionic hydrophobic compounds, and conventional granular activated carbon (GAC) were investigated for HFPO-DA removal. ANOVA results (p ≪ 0.001) revealed significant effects on initial concentration, contact time, and adsorbent type. Langmuir model-derived capacities were 285.019 and 144.461 mg/g for Qgel and GAC, respectively, with Qgel exhibiting higher capacity irrespective of pH. In column experiments, selective removal of HFPO-DA removal with Qgel was observed; specifically, in the presence of NaCl, the breakthrough time was extended by 10 h from 26 to 36 h. Meanwhile, the addition of NaCl decreased the breakthrough time from 32 to 14 h for GAC. However, in the presence of carbamazepine, neither of the adsorbents significantly changed the breakthrough time for HFPO-DA. Molecular simulations were also used to compare the adsorption energies and determine the preferential interactions of HFPO-DA and salts or other chemicals with Qgel and GAC. Molecular simulations compared adsorption energies, revealing preferential interactions with Qgel and GAC. Notably, HFPO-DA adsorption energy on GAC surpassed other ions during coexistence. Specifically, with Cl- concentrations from 1 to 10 times, Qgel showed lower adsorption energy for HFPO-DA (-62.50 ± 5.44 eV) than Cl- (-52.89 ± 2.59 eV), a significant difference (p = 0.036). Conversely, GAC exhibited comparable or higher adsorption energy for HFPO-DA (-18.33 ± 40.38 eV) than Cl- (-32.36 ± 29.89 eV), with no significant difference (p = 0.175). This suggests heightened selectivity of Qgel for HFPO-DA removal compared to GAC. Consequently, our study positions Qgel as a promising alternative for effective HFPO-DA removal, contributing uniquely to the field. Additionally, our exploration of molecular simulations in predicting micropollutant removal adds novelty to our study.

Managing PFAS exhausted Ion-exchange resins through effective regeneration/electrochemical process

This study proposes an integrated approach that combines ion-exchange (IX) and electrochemical technologies to tackle problems associated with PFAS contamination. Our investigation centers on evaluating the recovery and efficiency of IX/electrochemical systems in the presence of five different salts, spanning dosages from 0.1 % to 8 %. The outcomes reveal a slight superiority for NaCl within the regeneration system, with sulfate and bicarbonate also showing comparable efficacy. Notably, the introduction of chloride ion (Cl-) into the electrochemical system results in substantial generation of undesirable chlorate (ClO3-) and perchlorate (ClO4-) by-products, accounting for ∼18 % and ∼81 % of the consumed Cl-, respectively. Several agents, including H2O2, KI, and Na2S2O3, exhibited effective mitigation of ClO3- and ClO4- formation. However, only H2O2 demonstrated a favorable influence on the degradation and defluorination of PFOA. The addition of 0.8 M H2O2 resulted in the near-complete removal of ClO3- and ClO4-, accompanied by 1.3 and 2.2-fold enhancements in the degradation and defluorination of PFOA, respectively. Furthermore, a comparative analysis of different salts in the electrochemical system reveals that Cl- and OH- ions exhibit slower performance, possibly due to competitive interactions with PFOA on the anode's reactive sites. In contrast, sulfate and bicarbonate salts consistently demonstrate robust decomposition efficiencies. Despite the notable enhancement in IX regeneration efficacy facilitated by the presence of methanol, particularly for PFAS-specific resins, this enhancement comes at the cost of reduced electrochemical decomposition of all PFAS. The average decay rate ratio of all PFAS in the presence of 50 % methanol, compared to its absence, falls within the range of 0.11-0.39. In conclusion, the use of 1 % Na2SO4 salt stands out as a favorable option for the integrated IX/electrochemical process. This choice not only eliminates the need to introduce an additional chemical (e.g., H2O2) into the wastewater stream, but also ensures both satisfactory regeneration recovery and efficiency in the decomposition process through electrochemical treatment.

Removal of per- and polyfluoroalkyl substances from water by plasma treatment: Insights into structural effects and underlying mechanisms

Non-thermal plasma emerges as a promising technology for per- and polyfluoroalkyl substances (PFAS) decomposition due to its notable efficacy and environmentally friendly characteristics. In this study, we demonstrated the efficacy of a falling film dielectric barrier discharge (DBD) system for the removal of 10 PFAS, including perfluoroalkyl carboxylic acids (PFCAs), perfluoroalkyl sulfonic acids (PFSAs) and hexafluoropropylene oxide (HFPO) oligomer acids. Results showed that compounds with fluoroalkyl chain length>4 were effectively decomposed within 100 min, with long-chain PFAS demonstrating more pronounced removal performance than their short-chain analogues. The superior removal but low defluorination observed in HFPO oligomer acids could be ascribed to their ether-based structural features. The integration of experimental results with density functional theory (DFT) calculations revealed that the synergistic effects of various reactive species are pivotal to their efficient decomposition, with electrons, OH•, and NO2• playing essential roles. In contrast, the degradation of PFSAs was more dependent on electron attack than that of PFCAs and HFPO oligomer acids. Significantly, the most crucial degradation pathway for HFPO oligomer acids was the cleavage of ether CO, whether through radical or electron attack. Furthermore, the demonstrated effective removal in various water matrices showed the potential of the plasma system for removing PFAS in complex aquatic environments. This study provided mechanistic insights into PFAS degradation behavior in plasma processes, and it underscored the vital influence of molecular structures on degradability, thereby contributing to the further development and regulation of plasma-based technologies for treating PFAS in water.

Combined adsorption and electrochemical oxidation of perfluorooctanoic acid (PFOA) using graphite intercalated compound

Perfluorooctanoic acid (PFOA) is a bioaccumulative synthetic chemical containing strong C-F bonds and is one of the most common per- and polyfluoroalkyl substances (PFAS) detected in the environment. Graphite intercalated compound (GIC) flakes were used to adsorb and degrade PFOA through electrochemical oxidation. The adsorption followed the Langmuir model with a loading capacity of 2.6 µg PFOA g-1 GIC and a second-order kinetics (3.354 g µg-1 min-1). 99.4% of PFOA was removed by the process with a half-life of 15 min. When PFOA molecules broke down, they released various by-products, such as short-chain perfluoro carboxylic acids like PFHpA, PFHxA, and PFBA. This breakdown indicates the cleavage of the perfluorocarbon chain and the release of CF2 units, suggesting a transformation or degradation of the original compound into these smaller acids. Shorter-chain perfluorinated compounds had slower degradation rates compared to longer-chain ones. Combining these two methods (adsorption and in situ electrochemical oxidation) was found to be advantageous because adsorption can initially concentrate the PFOA molecules, making it easier for the electrochemical process to target and degrade them. The electrochemical process can potentially break down or transform the PFAS compounds into less harmful substances through oxidation or other reactions.