Distinguishing anaerobic digestion from electrochemical anaerobic digestion: Metabolic pathways and the role of the microbial community

Microbial mechanism for improving biogas production performance from boiling acidified pig manure feedstock

A short heat treatment (HT, 90 °C-100 °C, 5 min) was applied to two-phase anaerobic digestion (TPAD) of pig manure (PM) to investigate its effect on microbial inactivation in the acidified feedstock during the methanogenic phase. The results showed that no differences in biogas production at organic loading rate (OLR) below 4.28 g volatile solid (VS)/(L·d). However, as the organic load increased, the TPAD with HT exhibited greater biogas production and volatile organic acids removal than the control. By stabilizing pH, digestion of HT acidified feedstock at 9.56 g VS/(L·d) OLR resulted in a biogas yield of 340.1 mL/g VS, exceeding the control by 35.6 %. HT enriched syntrophic bacteria, Methanothrix and Methanobacterium methanogens, and one-carbon metabolizing genes in the methanogenic phase, enhancing energy storage and conversion. Accordingly, acidification followed by HT could be a potential method to improve microbial community and load tolerance in methanogenic phase of TPAD.

Mild alkaline conditions affect digester performance and community dynamics during long-term exposure

This paper examines the adaptive responses of microbial communities to gradual shifts in pH toward the mild alkaline range in anaerobic digestion (AD) systems. The results indicate that a pH of 8.0 serves as a critical upper limit for stable AD operation, beyond which microbial efficiency declines, underscoring the importance of microbial resilience against elevated pH stress. Specifically, hydrolysis genera, e.g. Eubacterium and Anaerobacterium, and syntrophic bacteria were crucial for reactor stability. Fibrobacter had also been shown to play a key role in the accumulation of propionate, thus leading to its dominance in the volatile fatty acid profile throughout the experimental phases. Overall, this investigation revealed the potential adaptability of microbial communities in AD systems to mild alkaline pH shifts, emphasizing the hydrolysis bacteria and syntrophic bacteria as key factors for maintaining metabolic function in elevated pH conditions.

Biogas upgrading performance and underlying mechanism in microbial electrolysis cell and anaerobic digestion integrated system

The productivity and efficiency of two-chamber microbial electrolysis cell and anaerobic digestion integrated system (MEC-AD) were promoted by a complex of anaerobic granular sludge and iron oxides (Fe-AnGS) as inoculum. Results showed that MEC-AD with Fe-AnGS achieved biogas upgrading with a 23%-29% increase in the energy recovery rate of external circuit current and a 26%-31% decrease in volatile fatty acids. The energy recovery rate of MEC-AD remained at 52%-57%, indicating a stable operation performance. The selectively enriched methanogens and electroactive bacteria resulted in dominant hydrogenotrophic and acetoclastic methanogenesis in the cathode and anode chambers. Mechanistic analysis revealed that MEC-AD with Fe-AnGS led to specifically upregulated enzymes related to energy metabolism and electron transfer. Fe-AnGS as inoculum could improve the long-term operation performance of MEC-AD. Consequently, this study provides an efficient strategy for biogas upgrading in MEC-AD.

Effect of anode material and dispersal limitation on the performance and biofilm community in microbial electrolysis cells

In a microbial electrolysis cell (MEC), the oxidization of organic compounds is facilitated by an electrogenic biofilm on the anode surface. The biofilm community composition determines the function of the system. Both deterministic and stochastic factors affect the community, but the relative importance of different factors is poorly understood. Anode material is a deterministic factor as materials with different properties may select for different microorganisms. Ecological drift is a stochastic factor, which is amplified by dispersal limitation between communities. Here, we compared the effects of three anode materials (graphene, carbon cloth, and nickel) with the effect of dispersal limitation on the function and biofilm community assembly. Twelve MECs were operated for 56 days in four hydraulically connected loops and shotgun metagenomic sequencing was used to analyse the microbial community composition on the anode surfaces at the end of the experiment. The anode material was the most important factor affecting the performance of the MECs, explaining 54-80 % of the variance observed in peak current density, total electric charge generation, and start-up lag time, while dispersal limitation explained 10-16 % of the variance. Carbon cloth anodes had the highest current generation and shortest lag time. However, dispersal limitation was the most important factor affecting microbial community structure, explaining 61-98 % of the variance in community diversity, evenness, and the relative abundance of the most abundant taxa, while anode material explained 0-20 % of the variance. The biofilms contained nine Desulfobacterota metagenome-assembled genomes (MAGs), which made up 64-89 % of the communities and were likely responsible for electricity generation in the MECs. Different MAGs dominated in different MECs. Particularly two different genotypes related to Geobacter benzoatilyticus competed for dominance on the anodes and reached relative abundances up to 83 %. The winning genotype was the same in all MECs that were hydraulically connected irrespective of anode material used.

Boosting thermophilic anaerobic digestion with conductive materials: Current outlook and future prospects

Thermophilic anaerobic digestion (TAD) can provide superior process kinetics, higher methane yields, and more pathogen destruction than mesophilic anaerobic digestion (MAD). However, the broader application of TAD is still very limited, mainly due to process instabilities such as the accumulation of volatile fatty acids and ammonia inhibition in the digesters. An emerging technique to overcome the process disturbances in TAD and enhance the methane production rate is to add conductive materials (CMs) to the digester. Recent studies have revealed that CMs can promote direct interspecies electron transfer (DIET) among the microbial community, increasing the TAD performance. CMs exhibited a high potential for alleviating the accumulation of volatile fatty acids and inhibition caused by high ammonia levels. However, the types, properties, sources, and dosage of CMs can influence the process outcomes significantly, along with other process parameters such as the organic loading rates and the type of feedstocks. Therefore, it is imperative to critically review the recent research to understand the impacts of using different CMs in TAD. This review paper discusses the types and properties of CMs applied in TAD and the mechanisms of how they influence methanogenesis, digester start-up time, process disturbances, microbial community, and biogas desulfurization. The engineering challenges for industrial-scale applications and environmental risks were also discussed. Finally, critical research gaps have been identified to provide a framework for future research.