Facile bio-fabrication of Pd-Ag bimetallic nanoparticles and its performance in catalytic and pharmaceutical applications: Hydrogen production and in-vitro antibacterial, anticancer activities, and model development

Harnessing the potential of bimetallic nanoparticles: Exploring a novel approach to address antimicrobial resistance

The growing global importance of antimicrobial resistance (AMR) in public health has prompted the creation of innovative approaches to combating the issue. In this study, the promising potential of bimetallic nanoparticles (BMNPs) was investigated as a novel weapon against AMR. This research begins by elaborating on the gravity of the AMR problem, outlining its scope in terms of the effects on healthcare systems, and stressing the urgent need for novel solutions. Because of their unusual features and wide range of potential uses, bimetallic nanoparticles (BMNPs), which are tiny particles consisting of two different metal elements, have attracted a lot of interest in numerous fields. This review article provides a comprehensive analysis of the composition, structural characteristics, and several synthesis processes employed in the production of BMNPs. Additionally, it delves into the unique properties and synergistic effects that set BMNPs apart from other materials. This review also focuses on the various antimicrobial activities shown by bimetallic nanoparticles, such as the rupturing of microbial cell membranes, the production of reactive oxygen species (ROS), and the regulation of biofilm formation. An extensive review of in vitro studies confirms the remarkable antibacterial activity of BMNPs against a variety of pathogens and sheds light on the dose-response relationship. The efficacy and safety of BMNPs in practical applications are assessed in this study. It also delves into the synergistic effects of BMNPs with traditional antimicrobial drugs and their ability to overcome multidrug resistance, providing mechanistic insight into these phenomena. Wound healing, infection prevention, and antimicrobial coatings on medical equipment are only some of the clinical applications of BMNPs that are examined, along with the difficulties and possible rewards of clinical translation. This review covers nanoparticle-based antibacterial regulation and emerging uses. The essay concludes with prospects for hybrid systems, site-specific targeting, and nanoparticle-mediated gene and drug delivery. In summary, bimetallic nanoparticles have surfaced as a potential solution, offering the public a more promising and healthier future.

Green synthesis trends and potential applications of bimetallic nanoparticles towards the sustainable development goals 2030

The world faces threats that the United Nations has classified into 17 categories with different objectives as solutions for each challenge that are enclosed in the Sustainable Development Goals (SDGs). These actions involved the widespread use of science and technology as pathways to ensure their implementation. In this regard, sustainability science seeks the research community's contribution to addressing sustainable development challenges. Specifically, nanotechnology has been recognized as a key tool to provide disruptive and effective strategies to reach the SDGs. This review proposes the application of bimetallic nanoparticle substances capable of providing possible solutions to achieve target SDG 3: good health and well-being, SDG 6: clean water and sanitation, and SDG 12: responsible consumption and production. Furthermore, the term green nanotechnology is introduced in each section to exemplify how green synthesized bimetallic nanoparticles have been used to resolve each target SDG. This review also outlines the current scenario regarding the utilization of metallic nanomaterials in the market, together with the upscaling challenges and the lack of understanding of the long-term effects and hazards to the environment regarding bimetallic nanoparticles.

High-Performance Hydrogen-Selective Pd-Ag Membranes Modified with Pd-Pt Nanoparticles for Use in Steam Reforming Membrane Reactors

A unique method for synthesizing a surface modifier for metallic hydrogen permeable membranes based on non-classic bimetallic pentagonally structured Pd-Pt nanoparticles was developed. It was found that nanoparticles had unique hollow structures. This significantly reduced the cost of their production due to the economical use of metal. According to the results of electrochemical studies, a synthesized bimetallic Pd-Pt/Pd-Ag modifier showed excellent catalytic activity (up to 60.72 mA cm-2), long-term stability, and resistance to COads poisoning in the alkaline oxidation reaction of methanol. The membrane with the pentagonally structured Pd-Pt/Pd-Ag modifier showed the highest hydrogen permeation flux density, up to 27.3 mmol s-1 m-2. The obtained hydrogen flux density was two times higher than that for membranes with a classic Pdblack/Pd-Ag modifier and an order of magnitude higher than that for an unmodified membrane. Since the rate of transcrystalline hydrogen transfer through a membrane increased, while the speed of transfer through defects remained unchanged, a one and a half times rise in selectivity of the developed Pd-Pt/Pd-Ag membranes was recorded, and it amounted to 3514. The achieved results were due to both the synergistic effect of the combination of Pd and Pt metals in the modifier composition and the large number of available catalytically active centers, which were present as a result of non-classic morphology with high-index facets. The specific faceting, defect structure, and unusual properties provide great opportunities for the application of nanoparticles in the areas of membrane reactors, electrocatalysis, and the petrochemical and hydrogen industries.

Enhanced photocatalytic performance of auto-combusted nanoparticles for photocatalytic degradation of azo dye under sunlight illumination and hydrogen fuel production

In this study, an innovative nanomaterial was synthesized for hydrogen production from methanolysis on sodium borohydride (NaBH₄) in order to be a solution for future energy problems. The nanocomposite containing FeCo, which does not contain noble metals, and whose support material is Polyvinylpyrrolidone (PVP), was synthesized by means of a thermal method. TEM, XRD and FTIR characterization methods were used for the analysis of the morphological and chemical structure of the nanocomposite. Nanocomposite particle size was 2.59 nm according to XRD and 5.45 nm according to TEM analysis for scale of 50 nm. For catalytic properties of nanomaterial in the methanolysis reaction of NaBH₄, temperature, catalyst, substrate, and reusability experiments were carried out and kinetic calculations were obtained. Among the activation parameters of FeCo@PVP nanoparticles, turnover frequency, enthalpy, entropy and activation energy were calculated as 3858.9 min^-1, 29.39 kJ/mol, -139.7 J/mol.K, and 31.93 kJ/mol, respectively. As a result of the reusability test of the obtained FeCo@PVP nanoparticles catalysts, which was carried out for 4 cycles, the catalytic activity was 77%. Catalytic activity results are given in comparison with the literature. In addition, the photocatalytic activity of FeCo@PVP NPs was evaluated against MB azo dye under solar light irradiation for 75 min and was found to be as 94%.

Eco-friendly fabrication of nonenzymatic electrochemical sensor based on cobalt/polymelamine/nitrogen-doped graphitic-porous carbon nanohybrid material for glucose monitoring in human blood

The design and development of eco-friendly fabrication of cost-effective electrochemical nonenzymatic biosensors with enhanced sensitivity and selectivity are one of the emerging area in nanomaterial and analytical chemistry. In this aspect, we developed a facile fabrication of tertiary nanocomposite material based on cobalt and polymelamine/nitrogen-doped graphitic porous carbon nanohybrid composite (Co-PM-NDGPC/SPE) for the application as a nonenzymatic electrochemical sensor to quantify glucose in human blood samples. Co-PM-NDGPC/SPE nanocomposite electrode fabrication was achieved using a single-step electrodeposition method under cyclic voltammetry (CV) technique under 1 M NH₄Cl solution at 20 constitutive CV cycles (sweep rate 20 mV/s). Notably, the fabricated nonenzymatic electroactive nanocomposite material exhibited excellent electrocatalytic sensing towards the quantification of glucose in 0.1 M NaOH over a wide concentration range from 0.03 to 1.071 mM with a sensitive limit of detection 7.8 μM. Moreover, the Co-PM-NDGPC nanocomposite electrode with low charge transfer resistance (Rct∼81 Ω) and high ionic diffusion indicates excellent stability, reproducibility, and high sensitivity. The fabricated nanocomposite materials exhibit a commendable sensing response toward glucose molecules present in the blood serum samples recommends its usage in real-time applications.

Facile synthesis of biogenic palladium nanoparticles using biomass strategy and application as photocatalyst degradation for textile dye pollutants and their in-vitro antimicrobial activity

Among biological applications, plant-mediated Pd NPs for multi-drug resistance (MDR) developed in pathogenic bacteria were synthesized with the help of biomass of lemon peel, a biological material, with a non-toxic, environmentally friendly, human-nature green synthesis method. Characterization of synthesized Pd NPs was carried out by UV-Vis spectrometry, Transmissive Electron Microscopy (TEM), X-ray diffraction (XRD), and Fourier Transform Infrared Spectroscopy (FTIR) techniques. According to TEM analysis, Pd NPs were confirmed to be in a spherical shape and the mean particle size was determined to be 4.11 nm. The crystal structure of Pd NPs was checked using XRD analysis and the mean particle size was observed to be 6.72 nm. Besides, the antibacterial activity of Pd NPs was determined against Escherichia coli (E. coli) (ATCC 8739), Bacillus subtilis (B. subtilis ATCC 6633), Staphylococcus aureus (S. aureus ATCC 6538), Klebsiella pneumoniae (K. pneumoniae ATCC 11296) and Serratia marcescens (S. marcescens ATCC) bacteria. Antibacterial activity was determined to be high in Pd NPs which is in conformance with the results acquired. The Pd NPs showed good photocatalytic activity, after 90 min illumination, about 81.55% and 68.45% of MB and MO respectively were catalysed by the Pd NPs catalyst, and 74.50% of RhB dyes were removed at 120 min of illumination. Within the scope of this project, it is recommended to use Pd NPs obtained by the green synthesis in the future as an antibacterial agent in biomedical use and for the cleaning of polluted waters.

Efficient green photocatalyst of silver-based palladium nanoparticles for methyle orange photodegradation, investigation of lipid peroxidation inhibition, antimicrobial, and antioxidant activity

Nanotechnology is an interdisciplinary study that has been developing worldwide in recent years and has a serious impact on human life. The fact that the nanoparticles of plant origin are clean, non-toxic, and biocompatible has enabled new fields of study. The Hibiscus sabdariffa (H. sabdariffa) plant has been attracted by scientists because of its impact on health and many other areas. The lipid peroxidation inhibiting activity, antioxidant properties, and antimicrobial properties of H. sabdariffa plant with Ag-Pd metal was ditermined. For the total phenolic component, gallic acid was used as the standard and quarcetin was used for the total flavonoid. The lipid peroxidation inhibition activity of Ag-Pd NPs in ethanol extract was found to be very well compared to the positive control (BHA). The lowest and highest concentrations of DPPH radical scavenging activity were 82.178-97.357%, whereas for BHA these values were found to be 84.142-94.142%. The highest concentration of Ag-Pd NPs at 200 μg/mL the DPPH radical quenching activity was higher than BHA. Ag-Pd NPs showed a good antimicrobial activity against certain pathogenic microorganisms such as Bacillus subtilis, Enterococcus faecalis, Escherichia coli, Pseudomonas aeruginosa, Candida albicans, which are the causative agents of various diseases in humans. The photodegradation activity of Ag-Pd NPs also investigated against Methyl orange dye (MO) under sunlight irradiation for 120 min and was found to be as 67.88.

Green synthesis, characterizations of silver nanoparticles using sumac (Rhus coriaria L.) plant extract and their antimicrobial and DNA damage protective effects

Today, antimicrobial resistance against bacteria has become an important global public health problem. In this sense, the development of new biomedical solutions is becoming increasingly important. Especially plant-based nanoparticles produced by green synthesis are used in many fields. AgNPs have an important place in nanoscience and nanotechnology, especially in nanomedicine. Therefore, the present study was conducted to synthesize AgNPs using the medicinal plant extract sumac and to characterize them using advanced techniques and to determine the antibacterial activity of some bacteria that cause disease. Nanoparticles produced by green synthesis are used in a wide area around the world due to their many advantages such as environmentally friendly, economically and non-toxically. In this study, AgNPs were biosynthesized using sumac extract and evaluated for their antibacterial potency against Bacillus cereus, Bacillus subtilis, Enterococcus faecalis, Pseudomonas aeruginos, and Candida albicans. UV-Vis spectroscopy of the prepared sumac-mediated silver solution showed the absorption maximum at about 400 nm. According to the TEM results obtained, it was observed that the particles were spherical, approximately 4 nm in size, and showed a homogeneous distribution. The sizes of nanoparticles formed by XRD pattern were supported and silver nanoparticles were obtained. According to the obtained XRD results, the crystal nature of nanoparticles in face-centered cubic structure was confirmed by the peaks in the XRD model corresponding to the planes (111) (200) (220) and (311). It was observed that the synthesized AgNPs provided a strong protection against plasmid DNA damage. It was determined that the inhibition zone diameters of biosynthesized nanoparticles measured in terms of antibacterial activity were between 10 and 14 mm. As a result, the study revealed significant antibacterial activity of the synthesized AgNPs due to extensive membrane damage.

Anoxybacillus flavithermus loaded ɣ-Fe2O3 magnetic nanoparticles as an efficient magnetic sorbent for the preconcentrations of Cu(II) and Mn(II)

It was hypothesized that -iron( oxide nanoparticles (ɣ-Fe₂O₃ NPs) functionalized with Anoxybacillus flavithermus (A. flavithermus) as an effective magnetic sorbent for the preconcentrations of toxic metal ions. It is clear to conclude that the main novelty of this study is that ɣ-Fe₂O₃ NPs loaded with A. flavithermus is selective-specific for Cu(II), Mn(II). Structural functional groups of the samples were elucidated by FTIR, and SEM. Significant experimental parameters were investigated in detail. 0.2 mL min^-1 of flow rate, 5 mL of 1 M of hydrochloric acid as eluent, 150 mg biogenic mass sample, and 150 mg ɣ-Fe₂O₃ NPs for supporting material were found as the best conditions. This developed method has been tested and verified using certified and standard reference materials. As a result of the studies, the pre-concentration factor of the Cu(II), Mn(II) metals was calculated as 40. All measurements showed that the developed solid-phase extraction (SPE) columns are available for 32 cycles. The use of ɣ-Fe₂O₃ NPs equipped with A. flavithermus as an effective magnetic sorbent for the first measurements of ions was thoroughly studied. In order of the biosorption capacities were calculated as 26.0, and 30.3 mg/g for Cu(II), Mn(II), respectively. The developed method for specifying the samples showed excellent to excellent results.

Removal of pharmaceuticals (diclofenac and amoxicillin) by maltodextrin/reduced graphene and maltodextrin/reduced graphene/copper oxide nanocomposites

Due to the scarcity of water and the growing industrialization, pharmaceutical wastewater treatment is of particular importance. For this reason, it is necessary to achieve an efficient method to eliminate all types of pharmaceutical pollutants. Herein, synthetic nano-composite is proposed to take a step towards improving the operation of removing pharmaceutical contaminants from the environment and aquatic and industrial effluents. Binary (maltodextrin/reconstituted graphene nanocomposite) and ternary (maltodextrin/reconstituted graphene nanocomposite/copper oxide) nanocomposites were prepared and characterized using, FT-IR, FESEM-EDS, TEM, DLS, and XRD. The nanocomposites were used to eliminate diclofenac and amoxicillin as Pharmaceuticals. The removal of amoxicillin at a concentration of 30 mg/L with an adsorbent dose of 0.05 g and a pH of 7.4 and an optimal temperature of 20 °C in 10 min has the highest removal rate of 86%. In addition, diclofenac with nano-adsorbents prepared under optimal conditions, including an initial concentration of 20 mg/L, adsorbent dose of 0.05 g, adsorption time of 7 min, a temperature of 20 °C and a pH of 7, has the highest removal efficiency of 94%. The results indicated that the prepared nanocomposites are alternative adsorbents to remove Pharmaceuticals from water.

Green synthesis of biocompatible core–shell (Au–Ag) and hybrid (Au–ZnO and Ag–ZnO) bimetallic nanoparticles and evaluation of their potential antibacterial, antidiabetic, antiglycation and anticancer activities

The fabrication of bimetallic nanoparticles (BNPs) using plant extracts is applauded since it is an environmentally and biologically safe method. In this research, Manilkara zapota leaf extract was utilized to bioreduce metal ions for the production of therapeutically important core–shell Au–Ag and hybrid (Au–ZnO and Ag–ZnO) BNPs. The phytochemical profiling of the leaf extract in terms of total phenolic and flavonoid content is attributed to its high free radical scavenging activity. FTIR data also supported the involvement of these phytochemicals (polyphenols, flavonoids, aromatic compounds and alkynes) in the synthesis of BNPs. Whereas, TEM and XRD showed the formation of small sized (16.57 nm) spherical shaped core–shell Au–Ag BNPs and ZnO nano-needles with spherical AuNPs (48.32 nm) and ZnO nano-rods with spherical AgNP (19.64 nm) hybrid BNPs. The biological activities of BNPs reinforced the fact that they show enhanced therapeutic efficacy as compared to their monometallic components. All BNPs showed comparable antibacterial activities as compared to standard tetracycline discs. While small sized Au–Ag BNPs were most effective in killing human hepato-cellular carcinoma cells (HepG2) in terms of lowest cell viability, highest intracellular ROS/RNS production, loss of mitochondrial membrane potential, induction of caspase-3 gene expression and enhanced caspase-3/7 activity. BNPs also effectively inhibited advanced glycation end products and carbohydrate digesting enzymes which can be used as a nano-medicine for aging and diabetes. The most important finding was the permissible biocompatibility of these BNPs towards brine shrimp larvae and human RBCs, which suggests their environmental and biological safety. This research study gives us insight into the promise of using a green route to synthesize commercially important BNPs with enhanced therapeutic efficacy as compared to conventional treatment options.

Graphical demonstartion of the Manikara zapota-mediated biosynthesis of Bimetallic nanoparticles (BNPs) and evalution of their biological activities.