Strategies for the on-line preconcentration and separation of hypolipidaemic drugs using micellar electrokinetic chromatography

The microemulsion electrokinetic capillary chromatography combined with reversed-electrode polarity stacking mode for enriching and quantifying lignanoids and ginsenosides in TCMs preparation Shengmai injection

An on-line large volume sample stacking with polarity switching (LVSS) method was proposed for simultaneously determining lignanoids and ginsenosides in MEEKC. The parameters including the pH value and concentration of buffer solution, SDS, organic modifier, oil phase, running voltage, and temperature as well as injection time, sample matrix, stacking voltage, and time influencing separation and stacking were systematically optimized. The method was verified by performing precision, accuracy, stability, and recovery. Its reliability was proved by separating and quantifying two lignanoids and three ginsenosides in Shengmai injectionSMI. The sensitivity of these compounds was improved by MEEKC-LVSS method for 6-11 times than conventional MEEKC. Thus, this developed on-line MEEKC-LVSS method was sensitive, practical, and reliable.

Sensitive Detection of Organophosphorus Pesticides in Medicinal Plants Using Ultrasound-Assisted Dispersive Liquid-Liquid Microextraction Combined with Sweeping Micellar Electrokinetic Chromatography

A simple, rapid, and sensitive method using ultrasound-assisted dispersive liquid-liquid microextraction (UA-DLLME) combined with sweeping micellar electrokinetic chromatography (sweeping-MEKC) has been developed for the determination of nine organophosphorus pesticides (chlorfenvinphos, parathion, quinalphos, fenitrothion, azinphos-ethyl, parathion-methyl, fensulfothion, methidathion, and paraoxon). The important parameters that affect the UA-DLLME and sweeping efficiency were investigated. Under the optimized conditions, the proposed method provided 779.0-6203.5-fold enrichment of the nine pesticides compared to the normal MEKC method. The limits of detection ranged from 0.002 to 0.008 mg kg(-1). The relative standard deviations of the peak area ranged from 1.2 to 6.5%, indicating the good repeatability of the method. Finally, the developed UA-DLLME-sweeping-MEKC method has been successfully applied to the analysis of the investigated pesticides in several medicinal plants, including Lycium chinense, Dioscorea opposite, Codonopsis pilosula, and Panax ginseng, indicating that this method is suitable for the determination of trace pesticide residues in real samples with complex matrices.

Determination of organophosphorus pesticides using dispersive liquid-liquid microextraction combined with reversed electrode polarity stacking mode-micellar electrokinetic chromatography

A rapid and sensitive method using two preconcentration techniques, dispersive liquid-liquid microextraction (DLLME) followed by reversed electrode polarity stacking mode (REPSM) was developed for the analysis of five organophosphorus pesticides (OPPs) by micellar electrokinetic chromatography (MEKC). Parameters that affect the efficiency of the extraction in DLLME and preconcentration by REPSM, such as the kind and volume of the extraction and disperser solvents, salt addition, sample matrix and injection time were investigated and optimized. Under the optimum conditions, the enrichment factors were obtained in the range from 477 to 635. The linearity of the method for parathion, azinphos and fenitrithion was in the range of 20-1000 ng mL(-1), and for malathion and diazinon in the range of 50-1000 ng mL(-1), with correlation coefficients (r(2)) ranging from 0.9931 to 0.9992. The limits of detecton (LODs) at a signal-to-noice ratio of 3 ranged from 3 to 15 ng mL(-1). The relative recoveries of five OPPs from water samples at spiking levels of 20 and 200 ng mL(-1) for parathion, azinphos and fenitrithion, and 50 and 500 ng mL(-1) for malathion and diazinon, were 69.5-103%. The proposed method provided high enrichment factors, good precision and accuracy with a short analysis time.

Review of recent developments of on-line sample stacking techniques and their application in capillary electrophoresis

Capillary electrophoresis (CE) has become one of the most useful tools in separation science because of its high separation efficiency, low cost, versatility, ease of sample preparation and automation. However, some limitations of CE, such as poor concentration sensitivity due to its lower sample loading and shorter optical path length, limits its further applications in separation science. In order to solve this problem, various on-line sample preconcentration techniques such as transient isotachophoresis preconcentration, field-enhanced sample stacking, micelle to solvent stacking, micelle collapse, dynamic pH junction, sweeping, solid phase extraction, single drop microextraction and liquid phase microextraction have been combined with CE. Recent developments, applications and some variants together with different combinations of these techniques integrating in CE are reviewed here and our discussions will be confined to the past three years (2008–2011).

High-sensitivity capillary electrophoresis method for monitoring purine nucleoside phosphorylase and adenosine deaminase reactions by a reversed electrode polarity switching mode

A simple, efficient, and highly sensitive in-line CE method was developed for the characterization and for inhibition studies of the nucleoside-metabolizing enzymes purine nucleoside phosphorylase (PNP) and adenosine deaminase (ADA) present in membrane preparations of human 1539 melanoma cells. After filling the running buffer (50 mM borate buffer, 100 mM SDS, pH 9.10) into a fused-silica capillary (50 cm effective length × 75 μm), a large sample volume was loaded by hydrodynamic injection (5 psi, 36 s), followed by the removal of the large plug of sample matrix from the capillary using polarity switching (-20 kV). The current was monitored and the polarity was reversed when 95% of the current had been recovered. The separation of the neutral analytes (nucleosides and nucleobases) was performed by applying a voltage of 15 kV. An about 10-fold improvement of sensitivity for the five investigated analytes (adenosine, inosine, adenine, hypoxanthine, xanthine) was achieved by large-volume stacking with polarity switching when compared with CE without stacking. For inosine and adenine detection limits as low as 60 nM were achieved. To the best of our knowledge, this represents the highest sensitivity for nucleoside and nucleobase analysis using CE with UV detection reported so far. The Michaelis-Menten constants (K(m)) for PNP and ADA and the inhibition constants (K(i)) for standard inhibitors determined with the new method were consistent with literature data.

Study of atypical kinetic behaviour of cytochrome P450 2C9 isoform with diclofenac at low substrate concentrations by sweeping-MEKC combination

In view of the fact that several studies have shown that diclofenac hydroxylation by cytochrome P450 2C9 deviated from Michaelis-Menten kinetics at low substrate concentrations, sweeping combined with MEKC was applied for the kinetic study of this pharmacologically important reaction. A 50  μm fused silica capillary (56  cm effective length) was used to carry out all separations. 70  mM SDS in 20  mM phosphate 20  mM tetraborate buffer, pH 8.6, was used as the BGE. Injection was accomplished by the application of 50  mbar (5  kPa) pressure to the sample vial for 52  s. Separation was performed at 22  kV (positive polarity), with a capillary temperature of 25°C and detection at 200  nm. The higher sensitivity of the sweeping-MEKC combination compared with the simple MEKC method enabled this reaction to be fitted to a Hill kinetic model and confirmed the findings of other authors. A Michaelis constant of 2.91±0.10  μM, maximum reaction velocity of 9.16±0.16  nmol/min/nmol and Hill coefficient of 1.66±0.08 were determined. This value of Hill coefficient confirms the presence of a positive cooperativity at low diclofenac concentrations and supports the hypothesis of two substrates binding at or near the active site.

MEKC as a powerful growing analytical technique

This review summarizes the principle and the developments in MEKC in terms of separation power, sensitivity, and detection approaches more than 25 years after its appearance. Newly used surfactants are mentioned. Classical and new sample concentration techniques in MEKC are described. The different detection approaches in MEKC with advantages, limitations, and future prospects are also discussed. This review highlights the wider application of MEKC in different analytical fields. Various recent selected applications of this technique in different analytical fields are reported.

Recent advances in enhancing the sensitivity of electrophoresis and electrochromatography in capillaries and microchips (2008-2010)

Capillary electrophoresis has been alive for over two decades now; yet, its sensitivity is still regarded as being inferior to that of more traditional methods of separation such as HPLC. As such, it is unsurprising that overcoming this issue still generates much scientific interest. This review continues to update this series of reviews, first published in Electrophoresis in 2007, with an update published in 2009 and covers material published through to June 2010. It includes developments in the fields of stacking, covering all methods from field-amplified sample stacking and large volume sample stacking, through to ITP, dynamic pH junction and sweeping. Attention is also given to on-line or in-line extraction methods that have been used for electrophoresis.