Mixed-mode solid-phase extraction coupled with liquid chromatography tandem mass spectrometry to determine phenoxy acid, sulfonylurea, triazine and other selected herbicides at nanogram per litre levels in environmental waters

A Review on Recent Innovations of Pretreatment and Analysis Methods for Sulfonylurea Herbicides

Sulfonylurea herbicides (SUHs) are widely used in agriculture because of their low dosage, low cost, and high selectivity. However, due to improper use and lack of effective management, their residues pose a threat to the human health through environment and food pollution. Therefore, there is a need for simple, quick, economical, and effective methods to analyze SUHs in plant-derived foods, crops, and environmental samples. The present article presents a comprehensive review of the pretreatment and analytical technologies used for SUHs in various sample matrices, focusing on the developments since 2010. The main pretreatment methods include liquid-liquid extraction, solid-phase extraction, QuEChERS, and different microextraction methods, whereas analytical methods mainly include liquid chromatography coupled with different detectors, capillary electrophoresis, among others. In addition, the present study also compared the advantages and disadvantages of the methods and the future development is prospected.

Herbicide residues in Australian grain cropping soils at sowing and their relevance to crop growth

Herbicides are used extensively in Australian grain cropping systems. Despite occasional observations of herbicide-induced phytotoxicity, there is little information on the persistence and carryover of multiple herbicide classes in cropping soils and the risk to subsequent crops. Two soil surveys were conducted, in 2015 (n = 40) and 2016 (n = 42), across different Australian grain cropping fields prior to sowing of winter crops, and soil samples analysed for herbicide residues (16 analytes in 2015 and 22 analytes in 2016). Samples in 2015 were taken at two depths (0-10 cm and 10-30 cm), whilst samples in 2016 were taken in topsoil (0-10 cm) only, but from two discrete locations in each field. Our research in both years found at least one herbicide (or herbicide metabolite) residue at all sites, with a median of 6 analytes detected in 2015 and 7 analytes detected in 2016. The most frequently detected residues were glyphosate and its primary breakdown product aminomethylphosphonic acid (AMPA), in 87 and 100%, respectively, of topsoil (0-10 cm) samples in 2015, and 67 and 93% of samples in 2016. The median concentration of glyphosate in 2015 was 0.12 mg kg^-1, while AMPA was 0.41 mg kg^-1. In 2016, median concentrations of glyphosate and AMPA were 0.22 mg kg^-1 and 0.31 mg kg^-1. Residues of 2,4-dichlorophenoxyacetic acid, trifluralin and diflufenican were also detected in >40% of topsoil samples in both seasons, but with median concentrations of <0.05 mg kg^-1. A literature review found limited availability of phytotoxicity thresholds for major grain crops exposed to soilborne herbicide residues. A risk assessment using available thresholds suggested that although up to 29% of fields contained trifluralin residues that could constrain cereal crop growth, and 24% of fields contained residues of phenoxy or sulfonylureas that could affect dicotyledonous crops, the majority of these fields when planted with tolerant crops would be unlikely to be affected by herbicide residues. More work is required to ascertain the spatial distribution, bioavailability and phytotoxicity of residues and residue mixtures to enable a more accurate agronomic risk assessment.

Switchable hydrophilic solvent-based dispersive liquid-liquid microextraction coupled with high-performance liquid chromatography for the determination of four types of sulfonylurea herbicides in soils

In this study, switchable hydrophilic solvent-based dispersive liquid-liquid microextraction coupled with high-performance liquid chromatography was developed for the determination of four sulfonylurea herbicides in soils. For the first time, the sample pretreatment was achieved due to the similar acid-base status of sulfonylurea herbicides and switchable hydrophilic solvent. In the extraction step, sulfonylurea herbicides were extracted as anions and transferred to an alkaline solution with switchable hydrophilic solvent anions. In the concentration step, two types of anions were transformed to their molecular state after the aqueous solution was acidified. In addition, the dispersion and microextraction processes were completed efficiently with the simultaneous formation of analytes and extractants. The factors affecting the extraction performance were optimized. Under the optimized conditions, good linearity was observed for each herbicide with correlation coefficients ranging from 0.9952 to 0.9978. The limits of detection were in the range of 0.1-0.2 μg/g. Moreover, the relative recoveries of the sulfonylurea herbicides at spiking levels of 0.5, 1, and 1.5 μg/g in soil samples were between 75 and 111% (relative standard deviations: 0.4-11.4%). Therefore, the proposed method in this study could be successfully applied to the analysis of four types of sulfonylurea herbicides in soil samples.

Dispersive liquid-liquid microextraction method combined with sugaring-out homogeneous liquid-liquid extraction for the determination of some pesticides in molasses samples

In this study, a sensitive analytical method was developed to determine some pesticides (cyprodinil, trifloxystrobin, prometryn, propachlor, fenitrothion, chlorpyrifos, profenofos, and phosalone) in molasses samples. Pesticides were extracted from samples by dispersive liquid-liquid microextraction method combined with sugaring-out homogeneous liquid-liquid extraction and determined by gas chromatography-mass spectrometry analysis. In this method, pesticides in molasses samples were first extracted using a water-miscible solvent (acetonitrile) in the sugaring-out homogeneous liquid-liquid extraction stage. The sugar in the ratio of 84-88% naturally contained in the molasses sample enabled phase separation in the acetonitrile-water homogeneous mixture. Then acetonitrile phase containing pesticides was used as dispersing solvent in the second step of the process. Under the specified optimum conditions, the limit of detection was calculated between 0.8-6.1 ng/g and the limit of quantification was in the range of 2.5-20 ng/g. The relative standard deviation values of molasses samples containing 150 ng/g of each analyte were found to be lower than 4.9% intra-day and 5.6% for inter-day. This validated method has been successfully applied to different types of molasses.

Computational design and synthesis of molecular imprinted polymers for selective solid phase extraction of sulfonylurea herbicides

A high-efficiency approach for the synthesis of molecularly imprinted polymers has been developed and further for the solid-phase extraction of sulfonylurea herbicides in food samples. Molecular simulation approach combined chemometric selected metsulfuron-methyl (MSM) and 2-trifluoromethyl acrylic acid (TFMAA) as the template and the monomer to synthesize the molecularly imprinted polymers (MIPs). Experimental validation confirmed that the MSM-imprinted polymers showed a higher selectivity and affinity to sulfonylurea herbicides. The optimized molecularly imprinted solid-phase extraction (MISPE) conditions, including loading, washing, and eluting conditions, were established. The developed MISPE technology combined HPLC-MSMS was successfully used for the determination of sulfonylurea herbicides in foods. Compared with commercial SPE columns, MISPE showed high affinity, excellent selectivity and low matrix effect. The recoveries of sulfonylurea herbicides spiked in four matrices were between 86.4% and 100.2%, with the relative standard deviations (RSD) in the range of 0.9%-10.5%.

Development of a maleic acid-based material to selectively solid-phase extract basic compounds from environmental samples

This study presents a novel mixed-mode weak cation-exchange (WCX) material. This material was prepared by means of the functionalization of a mesoporous divinylbenzene (DVB) resin with maleic acid (maleic acid-DVB), which yielded a high carboxylic moiety content resulting in WCX interactions as well as suitable specific surface area for reversed-phase interactions. After the optimization of the solid-phase extraction (SPE) protocol to enhance the selectivity of the sorbent, this material was evaluated as a novel WCX sorbent in the SPE of a group of drugs from environmental water samples. The method is based on SPE followed by liquid chromatography (LC) coupled to high resolution mass spectrometry (HRMS) with an Orbitrap analyzer, and was validated and applied for the determination of basic drugs in river, effluent and influent wastewater samples. Maleic acid-DVB sorbent yielded suitable recovery rates (57% to 89%) and an acceptable matrix effect (<32%) thanks to the effective washing step included when these environmental waters were loaded through the novel resin. The method was applied to different environmental water samples and some basic drugs were suitably quantified in these environmental samples.

A Simple Method for the Determination of Triazines from Seawater in Accordance with the Directive 2013/39/EU

Since the Directive 2013/39/EU included terbutryn to the list of priority substances of all water bodies, a previous method based on dispersive liquid-liquid micro-extraction (DLLME) for the determination of triazines in seawater has been modified. The main change consisted on the use of tandem mass spectrometry instead of diode array as detection technique. Due to the higher sensitivity of mass detector, sample volume was reduced and extraction solvent volume was optimized. The optimum extraction conditions were 5 mL of sample, 50 µL of 1-octanol and an agitation step instead of disperser solvent. The obtained analytical recoveries (73%-101% with relative standard deviations below 4%) meeting the requirements. The limits of quantification (between 0.016 and 0.021 µg L^-1) were more than 10 times lower than the limit set by the European Directive 2013/39/EU for terbutryn (0.34 µg L^-1). The proposed method was applied to the determination of the target compounds in seawater samples from A Coruña (Galicia, NW of Spain).

Materials for Solid-Phase Extraction of Organic Compounds

This review provides an overview of the most recent developments involving materials for solid-phase extraction applied to determine organic contaminants. It mainly concerns polymer-based sorbents that include high-capacity, as well as selective sorbents, inorganic-based sorbents that include those prepared using sol-gel technology along with structured porous materials based on inorganic species, and carbon nanomaterials, such as graphene and carbon nanotubes. Different types of magnetic nanoparticles coated with these materials are also reviewed. Such materials, together with their main morphological and chemical features, are described, as are some representative examples of their application as solid-phase extraction materials to extract organic compounds from different types of samples, including environmental water, biological fluids, and food.

Highly sensitive analytical method for herbicide clopyralid residue in cattle manure compost with ultraperformance liquid chromatography tandem mass spectrometry

A micro liquid-liquid extraction has been applied to sample preparation in the current authorized method for clopyralid in compost. The method rendered matrix effects practically negligible during determination with ultraperformance liquid chromatography-electrospray ionization tandem mass spectrometry with an improved limit of quantification of 0.7 µg/kg dry weight. Moreover, it had good accuracy and reproducibility. Therefore, the method is proposed as a highly effective routine analytical technique for investigating the actual status of clopyralid residue in compost.

Preparation and application of guanidyl-functionalized graphene oxide-grafted silica for efficient extraction of acidic herbicides by Box-Behnken design

A highly selective and efficient extraction material was synthesized through the functionalization of guanidyl onto the graphene oxide-grafted silica via a simple chemical modification, which was designed and proposed to improve the enrichment capacity for acidic herbicides. The extraction material was confirmed by scanning electron microscopy, Fourier transform infrared spectrometry, X-ray photoelectron spectrometry, thermal gravimetric analyzer and zeta potential analysis. Theoretical adsorption energies, static- and dynamic-state binding experiments, and comparative experiments with various adsorbents were investigated to elucidate the adsorption mechanism. The introduction of guanidyl endowed the sorbent with stronger Lewis base property and electron-donating ability, hence, excellent extraction recoveries for acidic herbicides could be obtained. Besides, electrostatic and π-π interactions were considered as two major driving impetuses in the adsorption process. Single-factor experiment and response surface methodology were utilized for the optimization of extraction and desorption conditions. Under the optimized conditions, the wide linearities were obtained with correlation coefficients ranging from 0.9904 to 0.9980, and the method detection limits were in the range of 0.5-2 μg L^-1. The relative standard deviation values of the recoveries of five different extractions were 3.0-7.1%. Coupled with high performance liquid chromatography, the as-proposed method was successfully applied to detect five acidic herbicides in Lycium barbarum (Goji). It turned out that the proposed method provided a promising perspective for the selective extraction and determination of polar acidic compounds in complex samples.

Development of a broad-specificity antibody-based immunoassay for triazines in ginger and the quantitative structure-activity relationship study of cross-reactive molecules by molecular modeling

In the present study, molecular modeling and principle component analysis (PCA) were used to select appropriate haptens for group detection of triazine herbicides. Four new structures together with three reported triazine derivatives were chosen for the screening of immunizing and coating haptens. A total of 31 triazines coupled with a 3D-QSAR methodology were employed to investigate the relationship between antigen-antibody recognition and molecular structures, the results of which revealed that the antibodies may recognize triazines from the side of molecules with the distinguishing atom and a steric volume matching with the spatial structure of antibodies. Finally, a broad-specificity heterologous immunoassay was developed for determining 10 triazine herbicides in ginger, where the detection limits were 2.5-15.1 μg kg-1 and recoveries were 67.9-102.6%. This study may broaden insight into triazine-antibody interactions and benefit designing novel performance-enhanced antibodies. The developed immunoassay can be further used for triazine detection in other complicated matrices.

Determination of triazine herbicides and their metabolites in multiple medicinal parts of traditional Chinese medicines using streamlined pretreatment and UFLC-ESI-MS/MS

A rapid, sensitive, and reliable ultra-fast liquid chromatography combined with electrospray ionization tandem mass spectrometry (UFLC-ESI-MS/MS) method was established and applied to simultaneous determination of 31 triazine herbicides and their metabolites in multiple medicinal parts of traditional Chinese medicines (TCMs). A streamlined pretreatment approach using one-step extraction and dilution was proposed, which provided high-throughput processing, excellent recovery, and negligible interference. Afterwards, multiple-reaction monitoring (MRM) and information-dependent acquisition (IDA) triggered enhanced product ion spectra (EPI) was adopted to identify and quantify the targets in a single analysis. The optimized method was then validated according to the guidelines of the European Commission for the following parameters: Matrix effects, specificity, accuracy, precision, linearity, range, and stability. The LOD and LOQ for the 31 triazine herbicides were 0.1-10 μg kg^-1 and 0.5-25 μg kg^-1, respectively. Recoveries at three concentration levels were within 67.9-120.3% with an associated precision RSD <20%. Using the proposed approach, trazines herbicides were determined from 44 commercially available TCMs. The detection rate of triazine herbicides residues was 15.9% of the total samples. Among them, atrazine, simeton, and simetryn were found in the radix, herba, and seed TCMs with values far below the referenced maximum residue limits (MRLs), but no residues were detected in either the flos or fructus. Taken together, this method has the potential to provide a means for triazines screening in extensive matrices, thereby laying the foundation for pesticide registration on TCMs. Moreover, it has the potential to guide further triazine residue control in TCMs.

Reliable methods for determination of triazine herbicides and their degradation products in seawater and marine sediments using liquid chromatography-tandem mass spectrometry

Triazines and their degradation products are transported to the aquatic environment, and once there, the probability to reach the marine environment is very high. In this paper, solid phase extraction (SPE) and extraction by matrix solid phase dispersion (MSPD) to analyse nine triazines (ametryn, atrazine, cyanazine, prometryn, propazine, simazine, simetryn, terbuthylazine and terbutryn) and eight degradation products (desethylatrazine, desethyldesisopropylatrazine, desethyl-2-hydroxyatrazine, desethylterbuthylazine, desisopropylatrazine, desisopropyl-2-hydroxyatrazine, 2-hydroxyatrazine and 2-hidroxyterbuthylazine) in seawater and marine sediments samples were used. The analysis was carried out using liquid chromatography with tandem mass spectrometry (LC-ESI-MS/MS). The methods were optimized and validated to achieve a selective and sensitive determination of the analytes from different sample, regardless of its complexity. Under the optimum conditions, the proposed methods provided adequate limits of quantification (0.05-0.45 μg L^-1 and 0.23-4.26 μg kg^-1 in seawater and marine sediments, respectively). Intra- and inter-day relative standard deviation were below 1.41% for all compounds. Recoveries were evaluated, and acceptable values that ranged from 87.5-99.4 and 60.9-99.7% for the seawater and sediment samples, respectively, were obtained. The proposed methods were applied to the analysis of the target compounds in seawater samples and marine sediments from a coastal area of Galicia (NW of Spain).

Herbicides and trace metals in urban waters in Melbourne, Australia (2011-12): concentrations and potential impact

Urban stormwater samples were collected from five aquatic systems in Melbourne, Australia, on six occasions between October 2011 and March 2012 and tested for 30 herbicides and 14 trace metals. Nineteen different herbicides were observed in one or more water samples from the five sites; chemicals observed at more than 40% of sites were simazine (100%), MCPA (83%), diuron (63%) and atrazine (53%). Using the toxicity unit (TU) concept to assess potential risk to aquatic ecosystems, none of the detected herbicides were considered to pose an individual, group or collective short-term risk to fish or zooplankton in the waters studied. However, 13 herbicides had TU values suggesting they might have posed an individual risk to primary producers at the time of sampling. Water quality guideline levels were exceeded on many occasions for Cd, Cu, Cr, Pb and Zn. Similarly, RQ_med and RQ_max exceeded 1 for Cd, Cr, Cu, Mn, Ni, Pb, V and Zn. Almost all the metals screened exceeded a log₁₀TU of -3 for every trophic level, suggesting that there may have been some impact on aquatic organisms in the studied waterbodies. Our data indicate that Melbourne's urban aquatic environments may be being impacted by approved domestic, industrial and sporting application of herbicides and that stormwater quality needs to be carefully assessed prior to reuse. Further research is required to understand the performance of different urban stormwater wetland designs in removing pesticides and trace metals. Applying the precautionary principle to herbicide regulation is important to ensure there is more research and assessment of the long-term 'performance' standard of all herbicides and throughout their 'life cycle'. Implementing such an approach will also ensure government, regulators, decision makers, researchers, policy makers and industry have the best possible information available to improve the management of chemicals, from manufacture to use.

Determination of Trace Levels of Irgarol in Estuarine Water Matrices by Bar Adsorptive Microextraction

Bar adsorptive microextraction (BAµE), using selective sorbent phases, followed by liquid desorption in combination with large volume injection-gas chromatography coupled to mass spectrometry (BAµE-LD/LVI-GC-MS), is proposed for the determination of trace levels of irgarol in estuarine water matrices. While we compared several polymers and activated carbons, one of the latter coatings showed much higher selectivity through BAµE. Assays performed on 25 mL of ultra-pure water sample fortified at 0.6 µg/L levels of irgarol yielded recoveries of 74.5 ± 8.6%, under optimized experimental conditions. The proposed analytical procedure showed convenient detection limits (16.0 ng/L) and good linear dynamic range (0.2-16.0 µg/L), with determination coefficients of 0.9982. Good precision was also achieved with RSD lower than 12.0%. The application of the present analytical approach on estuarine water samples by using the standard addition methodology revealed good sensitivity and linearity. The proposed methodology, using nanostructured sorbents and operating under the floating sampling technology, proved to be a suitable analytical alternative to monitor irgarol in estuarine water matrices. Moreover, it is easy to implement, reliable, sensitive, require low sample volume and have the possibility to choose the most selective sorbent coating according to the target compound involved.

Mixed-mode chromatography in pharmaceutical and biopharmaceutical applications

Mixed-mode chromatography (MMC) is a fast growing area in recent years, thanks to the new generation of mixed-mode stationary phases and better understanding of multimode interactions. MMC has superior applications in the separation of compounds that are not retained or not well resolved by typical reversed-phase LC methods, especially for polar and charged molecules. Due to the multiple retention modes that a single MMC column can offer, often MMC provides additional dimension to a separation method by adjusting the mobile phase conditions. Mixed-mode media is also an effective way to clean up complex sample matrices for purification purposes or for sensitive detection of trace amounts of analytes. In this article, we discuss mixed-mode stationary phases and separation mechanisms and review recent advances in pharmaceutical and biopharmaceutical applications including the analysis and/or purification of counterions, small molecule drugs, impurities, formulation excipients, peptides and proteins.

Study of the retention of benzotriazoles, benzothiazoles and benzenesulfonamides in mixed-mode solid-phase extraction in environmental samples

In the present study, the capabilities of strong cation-exchange and strong anion-exchange sorbents for solid-phase extraction (SPE) have been evaluated for the selective retention of benzotriazoles (BTRs), benzothiazoles (BTs) and benzenesulfonamides (BSAs), which are a group of neutral analytes with interesting properties such as high polarity and the capability of delocalizing electron density. The retention of these analytes has been compared in both sorbents for the first time, using a SPE procedure specially designed to promote ionic retention of the analytes with the objective of including a washing step with an organic solvent to eliminate interferences retained by hydrophobic interactions. As a result, ionic interactions between the analytes and both sorbents were observed, which allowed the successful introduction of a washing step using methanol in the SPE procedure even when most of the analytes were in their neutral state under SPE conditions. Consequently, a method was developed and further validated for each sorbent using liquid chromatography coupled to high-resolution mass spectrometry (LC-HRMS). Apart from the development of an improved method, special attention was paid to the discussion of the interactions present between the sorbents and each group of analytes to explain how these analytes in their neutral state might develop ionic interactions with the sorbents. At the end, the use of these sorbents helped to simplify previous developed methods where hydrophobic/hydrophilic sorbents were used, obtaining enhanced results when evaluated in river water and effluent and influent wastewaters.

Core-Shell Columns in High-Performance Liquid Chromatography: Food Analysis Applications

The increased separation efficiency provided by the new technology of column packed with core-shell particles in high-performance liquid chromatography (HPLC) has resulted in their widespread diffusion in several analytical fields: from pharmaceutical, biological, environmental, and toxicological. The present paper presents their most recent applications in food analysis. Their use has proved to be particularly advantageous for the determination of compounds at trace levels or when a large amount of samples must be analyzed fast using reliable and solvent-saving apparatus. The literature hereby described shows how the outstanding performances provided by core-shell particles column on a traditional HPLC instruments are comparable to those obtained with a costly UHPLC instrumentation, making this novel column a promising key tool in food analysis.

Determination of Triazine Herbicides in Drinking Water by Dispersive Micro Solid Phase Extraction with Ultrahigh-Performance Liquid Chromatography-High-Resolution Mass Spectrometric Detection

A novel dispersive micro solid phase extraction (DMSPE) method based on a polymer cation exchange material (PCX) was applied to the simultaneous determination of the 30 triazine herbicides in drinking water with ultrahigh-performance liquid chromatography-high-resolution mass spectrometric detection. Drinking water samples were acidified with formic acid, and then triazines were adsorbed by the PCX sorbent. Subsequently, the analytes were eluted with ammonium hydroxide/acetonitrile. The chromatographic separation was performed on an HSS T3 column using water (4 mM ammonium formate and 0.1% formic acid) and acetonitrile (0.1% formic acid) as the mobile phase. The method achieved LODs of 0.2-30.0 ng/L for the 30 triazines, with recoveries in the range of 70.5-112.1%, and the precision of the method was better than 12.7%. These results indicated that the proposed method had the advantages of convenience and high efficiency when applied to the analysis of the 30 triazines in drinking water.