Hydrophilic interaction chromatography versus reversed phase liquid chromatography coupled to mass spectrometry: Effect of electrospray ionization source geometry on sensitivity

Residue pattern and risk assessment of validamycin A and spinosyn A in tea using hydrophilic interaction liquid chromatography coupled with tandem mass spectrometry

Validamycin A (VA) and spinosyn A (SA) have been utilized as antibiotic pesticides in tea plantations for the control of pests and diseases. Both pesticides pose significant risks to human health and have been listed as key controlled new pollutants in China. So far, there have been few reports for the risk assessment of antibiotic pesticides in tea. In this study, a hydrophilic interaction liquid chromatography coupled with tandem mass spectrometry (HILIC-MS/MS) method was developed for the simultaneous detection of VA and SA residues in tea. Method validation demonstrated good accuracy and precision. During tea planting, SA and VA in tea shoots degraded fast, with the half-life of 0.36 to 0.43 days for SA and 0.72 to 0.92 days for VA. SA and VA in tea shoots degraded fast initially and then followed by a slower phase. Both SA and VA degraded rapidly during the withering and drying stages. Compared to green tea, the degradation rates of both pesticides were faster during black tea manufacturing. Transfer rates of VA and SA from tea into infusions had transfer rates of 76.7 % to 99.5 % and 1.5 % to 2.7 %, respectively. The chronic risk quotient (RQc) < 1 for both antibiotic pesticides indicated negligible consumer risk from tea.

Impact of conditioning runs on hydrophilic interaction chromatography repeatability and its application as a second dimension in online comprehensive two-dimensional liquid chromatography

A common separation approach for polar compounds involves coupling reversed-phase liquid chromatography (RPLC) with hydrophilic interaction chromatography (HILIC) in two-dimensional chromatography. The higher proportion of acetonitrile used in the HILIC mobile phase, which enhances mass spectrometry detection, encourages its use in the second dimension. Previous studies demonstrated that the HILIC column can be partially equilibrated within very short timeframes without compromising retention time stability, rendering it suitable in online comprehensive two-dimensional liquid chromatography (LC×LC) setups. In addition, a specific number of conditioning cycles seems necessary to establish stable retention times. Here, the repeatability of HILIC when employed as second dimension in LC×LC was investigated, with a focus on determining the required number of conditioning cycles to achieve repeatable retention times. Various parameters influenced by the LC×LC online modulation system were studied, such as steep gradient slopes up to 8%, and very short equilibration times, less than or equal to dead time, as well as injection volume and solvent, which depend on the first dimension. Finally, the use of HILIC as a second dimension with tailored conditioning runs was applied to the analysis of hyaluronic acid hydrogel digests. The application of an RPLC×HILIC method using five conditioning runs yielded exceptional stability in second-dimension retention times.

Development of a Cation Exchange SPE-HILIC-MS/MS Method for the Determination of Ningnanmycin Residues in Tea and Chrysanthemum

Ningnanmycin is a widely used antibiotic in agricultural production that effectively controls fungal and viral diseases in tea trees and chrysanthemums. The polarity characteristic of ningnanmycin has posed limitations on the development of robust detection methods, thereby hindering effective monitoring and control measures. By combining cation exchange solid phase extraction (SPE) with hydrophilic interaction chromatography tandem mass spectrometry (HILIC-MS/MS), we have effectively tackled the issue pertaining to the separation and retention of ningnanmycin. The average recoveries of ningnanmycin in green tea, black tea, and chrysanthemum were 77.3-82.0%, 80.1-81.5%, and 74.0-80.0%, respectively. The intraday and interday relative standard deviations (RSDs) were below and equal to 7.7%. Good linearity was observed in the concentration range of 1-1000 μg/L (R2 > 0.998). The limits of detection (LODs) ranged from 1.1 μg/kg to 7.1 μg/kg, and the limits of quantification (LOQs) ranged from 3.6 μg/kg to 23.7 μg/kg for ningnanmycin. These results indicate the good accuracy, repeatability, reproducibility, and sensitivity of the method. It is suitable for detecting ningnanmycin in tea and chrysanthemum.

Exploration and optimization of extraction, analysis and data normalization strategies for mass spectrometry-based DNA adductome mapping and modeling

Although interest in characterizing DNA damage by means of DNA adductomics has substantially grown, the field of DNA adductomics is still in its infancy, with room for optimization of methods for sample analysis, data processing and DNA adduct identification. In this context, the first objective of this study was to evaluate the use of hydrophilic interaction (HILIC) vs. reversed phase liquid chromatography (RPLC) coupled to high resolution mass spectrometry (HRMS) and thermal acidic vs. enzymatic hydrolysis of DNA followed by DNA adduct purification and enrichment using solid-phase extraction (SPE) or fraction collection for DNA adductome mapping. The second objective was to assess the use of total ion count (TIC) and median intensity (MedI) normalization compared to QC (quality control), iQC (internal QC) and quality control-based robust locally estimated scatterplot smoothing (LOESS) signal correction (QC-RLSC) normalization for processing of the acquired data. The results demonstrate that HILIC compared to RPLC allowed better modeling of the tentative DNA adductome, particularly in combination with thermal acidic hydrolysis and SPE (more valid models, with an average Q²(Y) and R²(Y) of 0.930 and 0.998, respectively). Regarding the need for data normalization and the management of (limited) system instability and signal drift, QC normalization outperformed TIC, MedI, iQC and LOESS normalization. As such, QC normalization can be put forward as the default data normalization strategy. In case of momentous signal drift and/or batch effects however, comparison to other normalization strategies (like e.g. LOESS) is recommended. In future work, further optimization of DNA adductomics may be achieved by merging of HILIC and RPLC datasets and/or application of 2D-LC, as well as the inclusion of Schiff base stabilization and/or fraction collection in the thermal acidic hydrolysis-SPE sample preparation workflow.

Simultaneous Analysis of 53 Pesticides in Safflower (Carthamus tinctorius L.) by Using LC-MS/MS Coupled with a Modified QuEChERS Technique

OBJECTIVE

An optimized quick, easy, cheap, effective, rugged, and safe (QuEChERS) technique was investigated and compared with the conventional QuEChERS technique for the simultaneous analysis of fifty-three pesticide residues in safflower using ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS).

METHOD

Graphitic carbon nitride (g-C₃N₄) consisting of a major amount of carbon and nitrogen with a large surface area was used as a QuEChERS adsorbent instead of graphitized carbon black (GCB) for safflower extraction purification. Validation experiments were performed using spiked pesticide samples, and real samples were analyzed.

RESULTS

The linearity of the modified QuEChERS technique was evaluated with high coefficients of determination (R-2) being higher than 0.99. The limits of detection were <10 μg/kg. The spiked recoveries ranged from 70.4% to 97.6% with a relative standard deviation of less than 10.0%. The fifty-three pesticides exhibited negligible matrix effects (<20%). Thiamethoxam, acetamiprid, metolachlor, and difenoconazole were detected in real samples using an established method.

CONCLUSION

This work provides a new g-C₃N₄-based modified QuEChERS technique for multi-pesticide residue analysis in complex food matrices.

Managing sample introduction problems in hydrophilic interaction liquid chromatography

Sample injection can cause serious problems in hydrophilic interaction liquid chromatography (HILIC) when the injection solvent has higher elution strength than the mobile phase (mp). It can lead to asymmetric peak shapes and poor efficiency. The problem can occur when the mp contains a high proportion of organic e.g. 95% acetonitrile (a weak solvent) whereas the injection solvent contains a higher proportion of water (a strong solvent) that is necessary to dissolve polar samples. We investigated different strategies to overcome this problem. A simple method is pre-column dilution where the injector is programmed to deliver a plug of weak solvent (e.g. pure acetonitrile) along with the sample dissolved in a solvent with higher water content than the mp. Another option is to use alternative organic solvents to acetonitrile in the injection solvent, e.g. isopropanol, acetone or tetrahydrofuran, that may give enhanced sample solubility. The role of the volume of injection solvents was investigated as well as the possible effects of mass overload on the results. The use of small sample volumes is always recommended to reduce mismatch effects.

30 Years of research on ESI/MS response: Trends, contradictions and applications

The variation of ionization efficiency for different compounds has puzzled researchers since the invention of the electrospray mass spectrometry (ESI/MS). Ionization depends on the properties of the compound, eluent, matrix, and instrument. Despite significant research, some aspects have remained unclear. For example, research groups have reached contradicting conclusions regarding the ionization processes. One of the best-known is the significance of the logP value for predicting the ionization efficiency. In this tutorial review, we analyse the methodology used for ionization efficiency measurements as well as the most important trends observed in the data. Additionally, we give suggestions regarding the measurement methodology and modelling strategies to yield meaningful and consistent ionization efficiency data. Finally, we have collected a wide range of ionization efficiency values from the literature and evaluated the consistency of these data. We also make this collection available for everyone for downloading as well as for uploading additional and new ionization efficiency data. We hope this GitHub based ionization efficiency repository will allow a joined community effort to collect and unify the current knowledge about the ionization processes.

A comparative study of UniSpray and electrospray sources for the ionization of neuropeptides in liquid chromatography tandem mass spectrometry

Despite the extensive use of electrospray ionization (ESI) for the quantification of neuropeptides by liquid chromatography-tandem mass spectrometry (LC-MS/MS), poor ionization and transmission efficiency are described for this ionization interface. A new atmospheric pressure ionization source, named UniSpray, was recently developed and commercialized. In this study, the LC-MS performance of this new ionization interface is evaluated and compared with ESI for the quantification of seven neuropeptides. Besides comparison of signal intensities and charge state distributions, also signal-to-noise (S/N) ratios and accuracy and precision were assessed. Additionally, matrix effects of human precipitated plasma and rat microdialysate were evaluated as well as the effect of three supercharging agents on the ionization of the seven neuropeptides. UniSpray ionization resulted in signal intensities four to eight times higher at the optimal capillary/impactor voltage for all seven neuropeptides. S/N values at the other hand only increased by not more than a twofold when the UniSpray source was used. Moreover, UniSpray ionization resulted in a shift towards lower charge states for some neuropeptides. Evaluation of the matrix effects by a post-column infusion set-up resulted in different infusion profiles between ESI and UniSpray. The charge state distributions of the neuropeptides obtained with UniSpray are highly comparable with ESI. Finally, the effect of the supercharging agents on the ionization of the neuropeptides tends to be peptide-dependent with both ionization sources.

Development of a HILIC-MS/MS method for the quantification of histamine and its main metabolites in human urine samples

An LC-MS/MS method was developed enabling the separation and quantification of histamine and its main metabolites (imidazole acetaldehyde, imidazole acetic acid, methyl imidazole acetic acid, methyl histamine, acetyl histamine) in urine samples. A fast separation was achieved in 10 min on two HILIC columns connected in series by adopting a linear gradient followed by an isocratic hold. The sample preparation consisted of a simple dilution step wherein 10 μL of urine was diluted with acetonitrile (ACN) to a final volume comprising 95% ACN. For methyl imidazole acetic acid, an additional dilution step was incorporated due to its high natural levels. Hereafter, the samples were stored at -20 °C and centrifuged prior to injection. Matrix matched calibrators were unavailable due to the endogenous occurrence of the compounds of interest. The occurrence of matrix effects and the lack of labeled internal standards prompted the use of the standard addition method as a viable alternative to solvent calibration. The validation of the method entailed matrix effects, accuracy and precision and was performed in compliance with the recent guidelines on endogenous compounds issued by the International Conference of Harmonization (ICH). The method was then adopted for the quantification of histamine and its metabolites in human urine samples collected from healthy volunteers and patients suffering from gastrointestinal discomfort.

Compensate for or Minimize Matrix Effects? Strategies for Overcoming Matrix Effects in Liquid Chromatography-Mass Spectrometry Technique: A Tutorial Review

In recent decades, mass spectrometry techniques, particularly when combined with separation methods such as high-performance liquid chromatography, have become increasingly important in pharmaceutical, bio-analytical, environmental, and food science applications because they afford high selectivity and sensitivity. However, mass spectrometry has limitations due to the matrix effects (ME), which can be particularly marked in complex mixes, when the analyte co-elutes together with other molecules, altering analysis results quantitatively. This may be detrimental during method validation, negatively affecting reproducibility, linearity, selectivity, accuracy, and sensitivity. Starting from literature and own experience, this review intends to provide a simple guideline for selecting the best operative conditions to overcome matrix effects in LC-MS techniques, to obtain the best result in the shortest time. The proposed methodology can be of benefit in different sectors, such as pharmaceutical, bio-analytical, environmental, and food sciences. Depending on the required sensitivity, analysts may minimize or compensate for ME. When sensitivity is crucial, analysis must try to minimize ME by adjusting MS parameters, chromatographic conditions, or optimizing clean-up. On the contrary, to compensate for ME analysts should have recourse to calibration approaches depending on the availability of blank matrix. When blank matrices are available, calibration can occur through isotope labeled internal standards and matrix matched calibration standards; conversely, when blank matrices are not available, calibration can be performed through isotope labeled internal standards, background subtraction, or surrogate matrices. In any case, an adjusting of MS parameters, chromatographic conditions, or a clean-up are necessary.

Simultaneous Analysis of Fenthion and Its Five Metabolites in Produce Using Ultra-High Performance Liquid Chromatography-Tandem Mass Spectrometry

A simultaneous analytical method for the organophosphorus insecticide fenthion and its five metabolites (fenthion oxon, fenthion oxon sulfoxide, fenthion oxon sulfone, fenthion sulfoxide, and fenthion sulfone) was developed based on ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). Five matrices (brown rice, chili pepper, orange, potato, and soybean) were selected to validate the method. The target compounds were analyzed using positive electrospray ionization in the multiple reaction monitoring mode. For the best sensitivity in regard to the detector response, water and methanol containing formic acid (0.1%) were selected as the mobile phase. The optimum extraction efficiency was obtained through a citrate-buffered QuEChERS (quick, easy, cheap, effective, rugged, and safe) method. Recovery tests were carried out at three spiking levels (n = 3). At all fortification levels, the accuracy and precision results were between 70% and 120% with a relative standard deviation of ≤15%. The limit of quantitation was 0.01 mg/kg, and the correlation coefficients (r²) of the matrix-matched calibration curves were >0.99. Significant signal suppression in the detector responses were observed for all matrices, suggesting that a compensation method, such as matrix-matched calibration, is required to provide accurate quantitative results. The applicability of the presented method was confirmed for the simultaneous analysis of fenthion and its metabolites in various crops.

Targeted metabolomics: Liquid chromatography coupled to mass spectrometry method development and validation for the identification and quantitation of modified nucleosides as putative cancer biomarkers

A notable change in the body fluids nucleosides of cancer patients has been actively highlighted in searches for new biomarkers to early cancer detection. For this reason, improvements of bioanalytical methods for these compounds focused on a noninvasive sampling trend are of great importance. Therefore, this work aimed firstly to develop efficient methods for nucleoside analysis in urine and serum by liquid chromatography-tandem mass spectrometry (LC-MS/MS), applying different strategies to quantify nine nucleosides, and further identify other untargeted nucleosides. Sample preparation was based on protein precipitation and affinity-solid phase extraction (SPE), whereas quantification was performed using a triple quadrupole (QqQ) mass analyzer operating in the selected reaction monitoring (SRM) mode. Surrogates matrices were proposed as an alternative to standard addition calibration. Specifically, to quantitate creatinine, a simple LC-MS/MS method was validated and used for normalization of urinary metabolites quantitation. To identify the other nucleosides, LC methods using different MS scans modes were evaluated on a quadrupole-time of flight (Q-TOF) or a hybrid triple quadrupole linear ion trap (Q-trap). Validation was performed for nucleosides quantification using the synthetic matrices of urine and serum, and selectivity, linearity, accuracy, reproducibility, matrix effect, LOD's and LOQ's were accessed, providing trustworthy results for bioanalysis purposes. Both LC-Q-Trap/MS and LC-Q-TOF/MS methods showed proper sensitivity for structural characterization on assays with urine and serum samples from healthy volunteers and could also be used in the identification of untargeted nucleosides. The investigated approaches delivered in-depth results and seem promising for future applications on urine and serum samples analyses aiming to validate nucleosides as cancer biomarkers.

A validated UHPLC-MS/MS method for simultaneous quantification of 9 exocyclic DNA adducts induced by 8 aldehydes

Human exposure to aldehydes is implicated in several diseases including cancer. These strong electrophilic compounds can react with nucleophilic sites in DNA to form reversible and irreversible modifications. These modifications, if not repaired, can contribute to pathogenesis. The aim of our study was to provide a mass spectrometry (MS)-based profiling method for identifying potential biomarkers of aldehydes exposure. We have developed and validated a highly sensitive method using ultra high performance liquid chromatography-electrospray ionization-tandem mass spectrometry (UHPLC-ESI-MS/MS) for the simultaneous quantitation of 9 exocyclic DNA adducts derived from 8 main exogenous and endogenous aldehydes, namely formaldehyde, acetaldehyde, acrolein, crotonaldehyde, malondialdehyde, 4-hydroxy-2-nonenal, glyoxal and methylglyoxal. Finally, we applied the established method to quantify adducts in genomic DNA isolated from the blood of a smoker and a non-smoker blood samples in order to demonstrate its applicability.

Analytical strategies for the determination of amino acids: Past, present and future trends

This review describes the analytical methods that have been developed over the years to tackle the high polarity and non-chromophoric nature of amino acids (AAs). First, the historical methods are briefly presented, with a strong focus on the use of derivatization reagents to make AAs detectable with spectroscopic techniques (ultraviolet and fluorescence) and/or sufficiently retained in reversed phase liquid chromatography. Then, an overview of the current analytical strategies for achiral separation of AAs is provided, in which mass spectrometry (MS) becomes the most widely used detection mode in combination with innovative liquid chromatography or capillary electrophoresis conditions to detect AAs at very low concentration in complex matrixes. Finally, some future trends of AA analysis are provided in the last section of the review, including the use of supercritical fluid chromatography (SFC), multidimensional liquid chromatography and electrophoretic separations, hyphenation of ion exchange chromatography to mass spectrometry, and use of ion mobility spectrometry mass spectrometry (IM-MS). Various application examples will also be presented throughout the review to highlight the benefits and limitations of these different analytical approaches for AAs determination.

Preparation of Cyclic-1,N2-propano-2'-deoxyguanosine-d7 as an Internal Standard for ESI-MS/MS Determination of DNA Damage from Acetaldehyde

Cyclic-1,N²-propano-2'-deoxyguanosine-d₇ (CPr-dG-d₇) was prepared as an isotopic internal standard (IS) for electrospray ionization tandem mass spectrometry (ESI-MS/MS) quantification of CPr-dG in DNA as a candidate cancer risk marker of acetaldehyde intake, mainly from drinking. The deuterated compound was reasonably synthesized from acetaldehyde-d₄ and 2'-deoxyguanosine in deuterium oxide (D₂O), preventing the deuterium atoms of acetaldehyde-d₄ from being substituted by hydrogen atoms, which occurred seriously in aqueous synthesis media via keto-enol tautomerism. Furthermore, another deuterium atom was added from D₂O to form CPr-dG-d₇. After four weeks of storage in H₂O at 10°C, CPr-dG-d₇ was found to be sufficiently stable for practical use. The calibration curve of CPr-dG by using a hydrophilic interaction chromatography-ESI-MS/MS system with CPr-dG-d₇ as the IS showed sufficient linearity from 1.0 × 10^-10 to 4.0 × 10^-9 M with r² = 0.998.

Optimization of flow splitting and make-up flow conditions in liquid chromatography/electrospray ionization mass spectrometry

RATIONALE

In liquid chromatography/mass spectrometry (LC/MS) the LC flow is often split prior to the mass spectrometer, for instance, when collecting fractions of the separated sample for other purposes or when less sensitive parallel detection is applied. The aim of this study is to optimize the actual split ratio and make-up flow composition.

METHODS

Different types of splitters were evaluated in combination with a make-up flow. A home-made 1/10 T-piece splitter and commercial 1/10, 1/100 and 1/250 splitters were evaluated by continuous and accurate measurements of the actual split ratio throughout the LC gradient. The make-up flow composition was optimized for maximum electrospray ionization (ESI)-MS sensitivity in the positive mode using ESI efficiency measurements.

RESULTS

Altogether 22 different solvent conditions were tested on 20 pharmaceutical compounds with a wide variety of functional groups and physicochemical properties (molecular weight, logP, and pK_a ). Methanol/10 mM formic acid in water (90/10) provided on average the best results.

CONCLUSIONS

Methanol/10 mM formic acid in water (90/10) proved to be the best make-up flow composition in relation to the average sensitivity obtained. Stronger acidic conditions using oxalic acid or higher formic acid concentrations had a clear positive effect on the sensitivity of compounds with low ionization efficiency. The tested split ratios were relatively stable over the main part of the gradient but showed some variation at very low and very high organic conditions. Differences were larger with methanol compared with acetonitrile containing solvent compositions and when applied without a column or with very long connecting tubing.

The differences in matrix effect between supercritical fluid chromatography and reversed phase liquid chromatography coupled to ESI/MS

For many sample matrices, matrix effects are a troublesome phenomenon using the electrospray ionization source. The increasing use of supercritical fluid chromatography with CO₂ in combination with the electrospray ionization source for MS detection is therefore raising questions: is the matrix effect behaving differently using SFC in comparison with reversed phase LC? This was investigated using urine, plasma, influent- and effluent-wastewater as sample matrices. The matrix effect was evaluated using the post-extraction addition method and through post-column infusions. Matrix effect profiles generated from the post-column infusions in combination with time of flight-MS detection provided the most valuable information for the study. The combination of both qualitative and semi-quantitative information with the ability to use HRMS-data for identifying interfering compounds from the same experiment was very useful, and has to the authors' knowledge not been used this way before. The results showed that both LC and SFC are affected by matrix effects, however differently depending on sample matrix. Generally, both suppressions and enhancements were seen, with a higher amount of enhancements for LC, where 65% of all compounds and all sample matrices were enhanced, compared to only 7% for SFC. Several interferences were tentatively identified, with phospholipids, creatinine, and metal ion clusters as examples of important interferences, with different impact depending on chromatographic technique. SFC needs a different strategy for limiting matrix interferences, owing to its almost reverse retention order compared to RPLC.

Progress in a selective method for the determination of the acetaldehyde-derived DNA adducts by using HILIC-ESI-MS/MS

Acetaldehyde (AA), which is present in tobacco smoke, automobile exhaust gases and alcohol beverage, is a mutagen and carcinogen. AA reacts with 2'-deoxyguanosine (dG) in DNA to form N²-ethyl-dG (EtdG) and cyclic, 1, N²-propano-dG (CPrdG), which are considered to have a critical role in carcinogenesis induced by AA. In this study, we have developed a highly sensitive method for the quantitation of the two AA-derived DNA adducts by using liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS) in which hydrophilic interaction chromatography (HILIC) employing mobile phases of high organic solvent concentration was selected to improve the ionization efficiency in the ESI process. Fourteen times and 11 times larger peak areas for EtdG and CPrdG, respectively, in HILIC-ESI-MS/MS were obtained compared with those in reversed phase (RP)-LC-ESI-MS/MS. Furthermore, 6.9 times (for EtdG) and 2.4 times (for CPrdG) larger peak areas were also obtained as additional enhancement by varying additive compounds in the HILIC mobile phases from ammonium acetate to ammonium bicarbonate. In total, the enhancements in detected MS signal intensities by exchanging from the RP-LC system to the HILIC system are 97 times for EtdG and 26 times for CPrdG, respectively. Three commercially available HILIC columns with different polar functional groups were examined and sufficient separation between normal 2'-deoxynucleosides and the AA-derived DNA adducts was achieved by a carbamoyl-bonded HILIC column. Finally, we applied the established method to quantify EtdG and CPrdG in the damaged calf thymus DNA.

Simultaneous determination of hydrophilic and lipophilic constituents in herbal medicines using directly-coupled reversed-phase and hydrophilic interaction liquid chromatography-tandem mass spectrometry

Limitations in the separation ability of conventional liquid chromatography system remains a challenge in developing a versatile method for simultaneously determining both hydrophilic and lipophilic constituents in herbal medicines (HMs). To measure compounds covering a broad polarity span in HMs, we developed a directly-coupled reversed-phase and hydrophilic interaction liquid chromatography-tandem mass spectrometry system. Samples were firstly separated according to lipophilicity by using a C₁₈ column. Utilizing a T-piece as connector, the eluent was then pumped into an amide column to get further separation that mainly based on the hydrogen bonding effects. Dan-Qi pair, an extensively used herb-combined prescription in China, was selected to test the practicability and performance of the established system. A total of 27 components, containing 9 hydrophilic and 18 lipophilic constituents, were simultaneously determined using a schedule multiple reaction monitoring method in 15 min. Up to 69.9% content could be monitored in one injection in Dan-Qi pair extract, showing a significant advantage over previous methods. The proposed method was expected to benefit the controllability of herbal medicines.

Quantitative mass spectrometry methods for pharmaceutical analysis

Quantitative pharmaceutical analysis is nowadays frequently executed using mass spectrometry. Electrospray ionization coupled to a (hybrid) triple quadrupole mass spectrometer is generally used in combination with solid-phase extraction and liquid chromatography. Furthermore, isotopically labelled standards are often used to correct for ion suppression. The challenges in producing sensitive but reliable quantitative data depend on the instrumentation, sample preparation and hyphenated techniques. In this contribution, different approaches to enhance the ionization efficiencies using modified source geometries and improved ion guidance are provided. Furthermore, possibilities to minimize, assess and correct for matrix interferences caused by co-eluting substances are described. With the focus on pharmaceuticals in the environment and bioanalysis, different separation techniques, trends in liquid chromatography and sample preparation methods to minimize matrix effects and increase sensitivity are discussed. Although highly sensitive methods are generally aimed for to provide automated multi-residue analysis, (less sensitive) miniaturized set-ups have a great potential due to their ability for in-field usage.This article is part of the themed issue 'Quantitative mass spectrometry'.

Study of matrix effects for liquid chromatography-electrospray ionization tandem mass spectrometric analysis of 4 aminoglycosides residues in milk

Matrix effect (ME) is always a major issue for the development of LC-MS/MS method. ME resulting from co-eluting residual matrix components can affect the ionization efficiency of target analytes, leading to quantification errors of the analytes of interest. The present work evaluates MEs of milk samples on simultaneous analysis of four aminoglycosides residues via LC-ESI/MS/MS including streptomycin, dihydrostreptomycin, spectinomycin and kanamycin. Approaches to reduce MEs were examined: optimization of the sample preparation, sample dilution and lower flow rate used. Three commercial sorbents were tested including Oasis MCX, Oasis HLB and Oasis WCX. WCX behaved better for all analytes, but high MEs (80.8-134.9%) were obtained. Therefore, a consecutive SPE of tC18-WCX was found to effectively reduce ME. Milk samples from different manufacturers were analyzed and low MEs (85.6-112.9%) were obtained.

Transferability of the electrospray ionization efficiency scale between different instruments

For the first time, quantitative electrospray (ESI) ionization efficiencies (IE), expressed as logIE values, obtained on different mass-spectrometric setups (four mass analyzers and four ESI sources) are compared for 15 compounds of diverse properties. The general trends of change of IE with molecular structure are the same with all experimental setups. The obtained IE scales could be applied on different setups: there were no statistically significant changes in the order of ionization efficiency and the root mean of squared differences of the logIE values of compounds between the scales compiled on different instruments were found to be between 0.21 and 0.55 log units. The results show that orthogonal ESI source geometry gives better differentiating power and additional pneumatic assistance improves it even more. It is also shown that the ionization efficiency values are transferable between different mass-spectrometric setups by three anchoring points and a linear model. The root mean square error of logIE prediction ranged from 0.24 to 0.72 depending on the instrument. This work demonstrates for the first time the inter-instrument transferability of quantitative electrospray ionization efficiency data. Graphical Abstract ᅟ.

Applications of hydrophilic interaction chromatography to amino acids, peptides, and proteins

This review summarizes the recent advances in the analysis of amino acids, peptides, and proteins using hydrophilic interaction chromatography. Various reports demonstrate the successful analysis of amino acids under such conditions. However, a baseline resolution of the 20 natural amino acids has not yet been published and for this reason, there is often a need to use mass spectrometry for detection to further improve selectivity. Hydrophilic interaction chromatography is also recognized as a powerful technique for peptide analysis, and there are a lot of papers showing its applicability for proteomic applications (peptide mapping). It is expected that its use for peptide mapping will continue to grow in the future, particularly because this analytical strategy can be combined with reversed-phase liquid chromatography, in a two-dimensional setup, to reach very high resolving power. Finally, the interest in hydrophilic interaction chromatography for intact proteins analysis is less evident due to possible solubility issues and a lack of suitable hydrophilic interaction chromatography stationary phases. To date, it has been successfully employed only for the characterization of membrane proteins, histones, and the separation of glycosylated isoforms of an intact glycoprotein. From our point of view, the number of hydrophilic interaction chromatography columns compatible with intact proteins (higher upper temperature limit, large pore size, etc.) is still too limited.

Aniline-modified porous graphitic carbon for hydrophilic interaction and attenuated reverse phase liquid chromatography

Most stationary phases for hydrophilic interaction liquid chromatography (HILIC) and reversed phase liquid chromatography (RPLC) are based on silica. Porous graphitic carbon (PGC) is an attractive alternative to silica-based phases due to its chemical and thermal stability, and unique selectivity. However, native PGC is strongly hydrophobic and in some instances excessively retentive. PGC particles with covalently attached aniline groups (Dimethylaniline-PGC and Aniline-PGC) were synthesized to alter the surface polarity of PGC. First, the diazonium salt of N,N-dimethyl-p-phenylenediamine or 4-nitroaniline was adsorbed onto the PGC surface. The adsorbed salt was reduced with sodium borohydride and (Aniline-PGC only) the nitro group was further reduced with iron powder to the aniline. X-ray photoelectron spectroscopy confirmed the surface functionalities and that these moieties were introduced to the surface at concentrations of 0.9 and 2.1molecules/nm(2), respectively. These modified PGC phases (especially Aniline-PGC) were evaluated as HILIC and reversed phases. The Dimethylaniline-PGC phase displayed only weak HILIC retention of phenolic solutes. In contrast, the Aniline-PGC phase displayed up to nearly a 7-fold increase in HILIC retention vs. an aniline-silica phase and selectivity that differed from 10 other HILIC phases. Introduction of aniline groups to the PGC surface reduced the RPLC retentivity of PGC up to more than 5-fold and improved the separation efficiency up to 6-fold. The chromatographic performance of Aniline-PGC is demonstrated by separations of nucleotides, nucleosides, carboxylic acids, basic pharmaceuticals, and other compounds.