Determination of transformation products of unsymmetrical dimethylhydrazine in water using vacuum-assisted headspace solid-phase microextraction

Pyrazines in food samples: Recent update on occurrence, formation, sampling, pretreatment and analysis methods

Pyrazines are a class of active aromatic substances existing in various foods. The accumulation of pyrazines has an impact on flavor and quality of food products. This review encompasses the formation mechanisms and control strategies of pyrazines via Maillard reaction (MR), including the new reactants and emerging techniques. Pyrazines characteristics are better understood through the developed sample pretreatments and detection methods. Herein, an in-depth review of pretreatments and analysis methods since 2010 is presented to explore the simple, fast, green, and effective strategies. Sample preparation methods include liquid phase extraction, solid phase extraction, supercritical fluid extraction, and microextraction methods such as liquid phase microextraction, and solid phase microextraction, etc. Detections are made by chromatographic methods, and sensors, etc. Advantages and limitations are discussed and compared for providing insights to further studies.

Headspace Microextraction. A Comprehensive Review on Method Application to the Analysis of Real Samples (from 2018 till Present)

This work describes current trends in the development of headspace microextraction methods. The main trends in the selection of detection techniques used in combination with microextraction and preferences in the selection of headspace liquid-phase microextraction (HS-LPME) or headspace solid-phase microextraction (HS-SPME) methods, depending on the analytes and their quantity, are also briefly presented. In the main part of the work, on the basis of current journal literature, headspace microextraction analytical methods used for the determination of various inorganic and organic analytes are classified and compared over the last five years. The work also reflects the current modifications of techniques and approaches proposed for these microextraction methods.

Unsymmetrical dimethylhydrazine and related compounds in the environment: Recent updates on pretreatment, analysis, and removal techniques

Unsymmetrical dimethylhydrazine (1,1-Dimethylhydrazine, UDMH) has been widely used as aerospace fuel in many countries. The launch of space vehicles can cause the release and leakage of UDMH into the environment, posing serious threats to ecology system and human population. Even worse, the health risks are also pertinent to its numerous classes of transformation products including N-Nitrosodimethylamine (NDMA), because most of them display carcinogenic and mutagenic properties. Recently, there has been an intense ongoing development of simple, fast, green, and effective techniques for determining and removing these hazardous substances. This review summarizes the latest research progress regarding the sources, fates, pretreatment, analysis, and removal techniques of UDMH and related products in the environment. Sample preparation methods mainly include pressurized liquid extraction, liquid-phase microextraction techniques, solid-phase extraction, headspace-solid-phase microextraction, and supercritical fluid extraction. Detection and identification methods mainly include high-performance liquid chromatography coupled with tandem mass spectrometry (HPLC-MS/MS), gas chromatography coupled with tandem mass spectrometry (GC-MS/MS), and sensors. Removal methods mainly include advanced oxidation processes, adsorption, biodegradation techniques. The advantages/disadvantages, applications, and trends of the proposed approaches are thoroughly discussed to provide a valuable reference for further studies.

Quantification of trace transformation products of rocket fuel unsymmetrical dimethylhydrazine in sand using vacuum-assisted headspace solid-phase microextraction

Quantification of unsymmetrical dimethylhydrazine transformation products in solid samples is an important stage in monitoring of environmental pollution caused by heavy rockets launches. The new method for simultaneous quantification of unsymmetrical dimethylhydrazine transformation products in sand samples using vacuum-assisted headspace solid-phase microextraction without addition of water followed by gas chromatography-mass spectrometry is proposed. Decreasing air evacuation time from 120 to 20 s at 23 °C resulted in increased responses of analytes by 25-46% and allowed obtaining similar responses as after evacuation at -30 °C. The best combination of responses of analytes and their relative standard deviations (RSDs) was achieved after air evacuation of a sample (m = 1.00 g) for 20 s at 23 °C, incubation for 30 min at 40 °C, and 30-min extraction at 40 °C by Carboxen/polydimethylsiloxane (Car/PDMS) fiber. The method was validated in terms of linearity (R²=0.9912-0.9938), limits of detection (0.035 to 3.6 ng g^-1), limits of quantification (0.12-12 ng g^-1), recovery (84-97% with RSDs 1-11%), repeatability (RSDs 3-9%), and reproducibility (RSDs 7-11%). It has a number of major advantages over existing methods based on headspace solid-phase microextraction-lower detection limits, better accuracy and precision at similar or lower cost of sample preparation. The developed method was successfully applied for studying losses of analytes from open vials with model sand spiked with unsymmetrical dimethylhydrazine transformation products. It can be recommended for analysis of trace concentrations of unsymmetrical dimethylhydrazine transformation products when studying their transformation, migration and distribution in contaminated sand.

Quantification of transformation products of rocket fuel unsymmetrical dimethylhydrazine in air using solid-phase microextraction

Quantification of unsymmetrical dimethylhydrazine transformation products in ambient air is important for assessing the environmental impact of heavy rocket launches. There are very little data of such analyses, which is mainly caused by the low number of analytes covered by the available analytical methods and their complexity. A simple and cost-efficient method for accurate simultaneous determination of seven unsymmetrical dimethylhydrazine transformation products in air using solid-phase microextraction followed by gas chromatography-mass spectrometry was developed. The method was optimized for air sampling and solid-phase microextraction from 20-mL vials, which allows full automation of analysis. The extraction for 5 min by Carboxen/polydimethylsiloxane fiber from amber vials and desorption for 3 min provided the greatest analytes' responses, lowest relative standard deviations, linear calibration (R² ≥ 0.99), and limits of detection from 0.12 to 0.5 μg/m³ . Samples with concentrations 500 μg/m³ can be stored at 21 ± 1°C without substantial losses (1-11%) for up to 24 h, while air samples with concentrations 10 and 50 μg/m³ stored for up to 24 h can be used for accurate quantification of only two and four out of seven analytes, respectively. The developed method was successfully tested for the analysis of air above real soil samples contaminated with unsymmetrical dimethylhydrazine rocket fuel.

Gas Chromatography-Mass Spectrometry Quantification of 1,1-Dimethylhydrazine Transformation Products in Aqueous Solutions: Accelerated Water Sample Preparation

The use of highly toxic rocket fuel based on 1,1-dimethylhydrazine (UDMH) in many types of carrier rockets poses a threat to environment and human health associated with an ingress of UDMH into wastewater and natural reservoirs and its transformation with the formation of numerous toxic nitrogen-containing products. Their GC-MS quantification in aqueous samples requires matrix change and is challenging due to high polarity of analytes. To overcome this problem, accelerated water sample preparation (AWASP) based on the complete removal of water with anhydrous sodium sulfate and transferring analytes into dichloromethane was used. Twenty-nine UDMH transformation products including both the acyclic and heterocyclic compounds of various classes were chosen as target analytes. AWASP ensured attaining near quantitative extraction of 23 compounds with sample preparation procedure duration of no more than 5 min. Combination of AWASP with gas chromatography-mass spectrometry and using pyridine-d₅ as an internal standard allowed for developing the rapid, simple, and low-cost method for simultaneous quantification of UDMH transformation products with detection limits of 1-5 μg L^-1 and linear concentration range covering 4 orders of magnitude. The method has been validated and successfully tested in the analysis of aqueous solutions of rocket fuel subjected to oxidation with atmospheric oxygen, as well as pyrolytic gasification in supercritical water modelling wastewater from carrier rockets launch sites.

The effect of vacuum: an emerging experimental parameter to consider during headspace microextraction sampling

The effect of vacuum is an emerging experimental parameter to consider during optimization of a variety of headspace microextraction methodologies. The positive effect of vacuum was initially demonstrated for headspace solid-phase microextraction and was recently expanded to single-drop microextraction and higher capacity sorbents i.e. stir bar sorptive extraction. In all cases, sampling under vacuum greatly accelerated the extraction kinetics of analytes exhibiting long equilibration times under atmospheric pressure. At the same time, the extraction of analytes that reached equilibrium fast was not affected. In all optimized methods, extraction times were greatly reduced and/or sampling temperatures were lower to those reported with the standard methodology under atmospheric pressure. This work succinctly overviews the effect of vacuum on the different headspace microextraction technologies reported so far. The fundamental concepts describing the pressure dependence of each methodology are pulled together and presented in a simplified manner. The latest findings on the combined effects of vacuum and several selected experimental parameters typically examined during method optimization are then presented and the practical aspects of past outcomes are highlighted. The discussion also includes the air-evacuation step and the analysis of complex matrices. This article is intended for readers who are either new to the field of vacuum headspace microextraction sampling or its use and want to exploit this powerful approach. Graphical abstract.

Development of an LC-MS method for determination of nitrogen-containing heterocycles using mixed-mode liquid chromatography

N-containing heterocycles (NCHs) are largely used as precursors for pharmaceuticals and can enter the environment. Some NCHs have been shown to be toxic, persistent, and very mobile in the environment. Thus, they have received increasing attention in the past years. However, the analysis of these polar compounds in environmental samples is still a challenge for liquid chromatography. This paper investigates the use of mixed-mode liquid chromatography (MMLC), which has reversed-phase and ion exchange characteristics for measurements of NCHs in water. NCHs with low pK_a (i.e., < 2.5) display mainly reversed-phase interactions (neutral species) with the stationary phase and those with higher pK_a (i.e., > 5) interact by a mixture of reversed-phase/ion exchange/HILIC mechanism. It was also shown that the presented method performs well in the quantification of the majority of the selected NCHs in surface water with MDLs between 3 and 6 μg/L, a low matrix effect and recoveries in the range of 77–96% except for pyridazine exhibiting 32% were achieved. The method was successfully employed to follow the degradation of NCHs in ozonation.

Snow pollution by nitrogen-containing substances as a consequence of rocket launches from the Baikonur Cosmodrome

In this paper, we assessed snow pollution by nitrogen-containing substances including rocket propellants - UDMH (unsymmetrical dimethylhydrazine, (СН₃)₂NNH₂) and NT (nitrogen tetroxide, N₂O₄) - and their transformation products (NDMA (nitrosodimethylamine, (CH₃)₂NNO), NO₃^-, NO₂^- and NH₄⁺) within the falling regions (FRs) of the first and second stages of Proton-M rockets launched from the Baikonur Cosmodrome. At the first stage FR in Central Kazakhstan, snow with a pH range from 1.7 to 9.0 was contaminated by N-containing substances (maximal value in g/L): UDMH - 0.27, NDMA - 0.04, NO₃^- - 19, NH₄⁺ - 0.04 and NO₂^- - 0.13. The first stage landing resulted in snow contamination by soil dust particles and N-containing substances at a rate of 13 g/m² and 82 mg/m²/day, respectively. The maximal permissible addition (MPA) for UDMH, NDMA and NO₃^- to the 0-5 cm layer of soil was estimated at 0.06, 0.006 and 70.2 mg/m², respectively. At the second stage FR in the NE Altai, substances released by space transportation were absent and the concentration of NO₃^- and NH₄⁺ corresponded to the natural background level. The index of contamination (IC) was used for characterizing the degree of snow contamination by N-containing substances. A simulation model was developed for analysing the dependence of snow contamination by rocket propellant components on the weather parameters.

Opportunities for green microextractions in comprehensive two-dimensional gas chromatography / mass spectrometry-based metabolomics - A review

Microextractions have become an attractive class of techniques for metabolomics. The most popular technique is solid-phase microextraction that revolutionized the field of modern sample preparation in the early nineties. Ever since this milestone, microextractions have taken on many principles and formats comprising droplets, fibers, membranes, needles, and blades. Sampling devices may be customized to impart exhaustive or equilibrium-based characteristics to the extraction method. Equilibrium-based approaches may rely on additional methods for calibration, such as diffusion-based or on-fiber kinetic calibration to improve bioanalysis. In addition, microextraction-based methods may enable minimally invasive sampling protocols and measure the average free concentration of analytes in heterogeneous multiphasic biological systems. On-fiber derivatization has evidenced new opportunities for targeted and untargeted analysis in metabolomics. All these advantages have highlighted the potential of microextraction techniques for in vivo and on-site sampling and sample preparation, while many opportunities are still available for laboratory protocols. In this review, we outline and discuss some of the most recent applications using microextractions techniques for comprehensive two-dimensional gas chromatography-based metabolomics, including potential research opportunities.

Evaluation of a novel hollow fiber membrane technique for collection of 1,1-dimethylhydrazine in air

The purpose of this study was to develop a novel one-step method for the time-weighted average determination of 1,1-dimethylhydrazine (UDMH) in the air followed by spectrophotometric detection. For this reason, 0.1% hydrochloric acid as the absorbent was used in hollow fiber (HF) membrane for sampling of UDMH from an atmospheric standard chamber. Response surface methodology (RSM) with central composite design (CCD) was used to optimize the sampling parameters, such as flow rate and sampling time. Moreover, several analytical parameters including breakthrough (BT) volume, storage time, and carryover effect of the proposed HF were investigated. The results showed that optimal sampling rate was 9.90 mL/min. In order to validate the proposed method, it was compared with the National Institute for Occupational Safety and Health (NIOSH) 3515 method, which showed good compatibility between the two methods. Intra- and inter-day repeatability values of the HF method were in the range 0.082-0.1 and 0.091-0.12, respectively, and the limits of detection (LODs) and limits of quantitation (LOQs) were 0.002 and 0.006 ng/mL, respectively. The storage time of the proposed HF was 7 days at 2 °C. These results demonstrated that the one-step HF membrane offered a high sensitivity for sampling of UDMH in air.

Quantification of transformation products of unsymmetrical dimethylhydrazine in aqueous extracts from soil based on vacuum-assisted headspace solid-phase microextraction

Quantification of transformation products of unsymmetrical dimethylhydrazine (UDMH) in soil requires tedious, time- and labor-consuming sample preparation. The simple and fast method for quantification of transformation products of UDMH in aqueous extracts from soil using vacuum-assisted headspace solid-phase microextraction (Vac-HSSPME) was optimized in this work. The method is based on extraction of analytes from soil with water followed by Vac-HSSPME of the obtained aqueous extracts, and gas chromatography-mass spectrometry analysis. The target transformation products were: pyrazine, 1-methyl-1H-pyrazole, N-nitrosodimethylamine, N,N-dimethylformamide, 1-methyl-1Н-1,2,4-triazole, 1-methyl-imidazole and 1H-pyrazole. The effect of a sample pH on responses of target analytes was studied. It was negligible, and no pH adjustment was recommended before a subsequent extraction. The water amount was optimized to provide the best combination of analytes responses and their precision. Extraction by adding 7.00 mL of water to 2.0 g of soil ensured linear dependence of responses of the analytes on their concentrations in soil. The optimized method provided detection limits of target analytes in soil in the range from 0.2 to 9 ng/g. The spike recoveries obtained for model samples were in the range 90-103%. The developed method can be recommended for application in laboratories conducting routine analyses of soil samples potentially contaminated by rocket fuel residuals.