A hydrophobic deep eutectic solvent based vortex-assisted liquid-liquid microextraction for the determination of formaldehyde from biological and indoor air samples by high performance liquid chromatography

Deep Eutectic Solvents for Extraction and Preconcentration of Organic and Inorganic Species in Water and Food Samples: A Review

Deep eutectic solvents (DESs) have been developed as green solvents and these are capable as alternatives to conventional solvents used for the extraction of organic and inorganic species from food and water samples. The continuous generation of contaminated waste and increasing concern for the human health and environment have compelled the scientific community to investigate more ecological schemes. In this concern, the use of DESs have developed in one of the chief approach in the field of chemistry. These solvents have appeared as a capable substitute to conventional hazardous solvents and ionic liquids. The DESs has distinctive properties, easy preparation and components availability. It is not only used in scienctific fields but also used in quotidian life. There are many advantages of DESs in analytical chemistry, they are largely used for extraction and determination of inorganic and organic compounds from different samples. In previous a few years, several advanced researches have been focused on the separation and preconcentration of low level of pollutants using DESs as the extractants. This review summarizes the use of DESs in the separation and preconcentration of organic and inorganic species from water and food samples using various microextraction processes.

Advances in the novel and green-assisted techniques for extraction of bioactive compounds from millets: A comprehensive review

Millets are rich in nutritional and bioactive compounds, including polyphenols and flavonoids, and have the potential to combat malnutrition and various diseases. However, extracting these bioactive compounds can be challenging, as conventional methods are energy-intensive and can lead to thermal degradation. Green-assisted techniques have emerged as promising methods for sustainable and efficient extraction. This review explores recent trends in employing green-assisted techniques for extracting bioactive compounds from millets, and potential applications in the food and pharmaceutical industries. The objective is to evaluate and comprehend the parameters involved in different extraction methods, including energy efficiency, extraction yield, and the preservation of compound quality. The potential synergies achieved by integrating multiple extraction methods, and optimizing extraction efficiency for millet applications are also discussed. Among several, Ultrasound and Microwave-assisted extraction stand out for their rapidity, although there is a need for further research in the context of minor millets. Enzyme-assisted extraction, with its low energy input and ability to handle complex matrices, holds significant potential. Pulsed electric field-assisted extraction, despite being a non-thermal approach, requires further optimization for millet-specific applications, are few highlights. The review emphasizes the importance of considering specific compound characteristics, extraction efficiency, purity requirements, and operational costs when selecting an ideal technique. Ongoing research aims to optimize novel extraction processes for millets and their byproducts, offering promising applications in the development of millet-based nutraceutical food products. Therefore, the current study benefits researchers and industries to advance extraction research and develop efficient, sustainable, and scalable techniques to extract bioactive compounds from millets.

A sensitive fluorometric-colorimetric dual-mode intelligent sensing platform for the detection of formaldehyde

Excess formaldehyde (FA) is a strong carcinogen, so the development of a rapid visualized and portable formaldehyde detection platform is of great research importance. A multi-color fluorescence sensing system constituted of model compound (NAHN) and red-emitting InP/ZnS QDs was constructed herein, which can simultaneously realize fluorometric-colorimetric dual-mode sensing when exposed to FA environment. Its preparation process was simplified, the detection process was green, and the limits of detection (LOD) were 0.623 μM and 0.791 μM, respectively. The high recoveries of FA in actual water samples indicated that the sensor had broad application prospects. The prepared fluorescent film can be utilized for rapid visual simulation analysis of FA on the surface of various fruits and vegetables. In addition, a serial logic gate was designed to quickly semi-quantitatively assess FA concentration, which promoted the realization of on-site intelligent evaluation of FA.

Hybrid materials based on deep eutectic solvents for the preconcentration of formaldehyde by SPME in coffee beverages

Coffee is one of the most widely consumed beverages. It can be prepared from green or roasted beans or from instant coffee. Unfortunately, in addition to the aroma obtained in the coffee roasting process, among others, formaldehyde can be produced. In this study, thin-film solid-phase microextraction was used to preconcentrate trace amounts of formaldehyde in different types of coffee with different roasting levels. For this purpose, 18 hybrid materials based on deep eutectic solvents were synthesized and tested as sorbents in thin-film solid-phase microextraction. The coffee samples were brewed, and then formaldehyde present in them was derivatized using the Nash reagent. The sample preparation procedure was optimized for selected DES-based sorbent using a central composite design method and validated. Formaldehyde was determined in almost all samples of second-crack coffee (roasted at 240 °C) at 0.17-0.75 ng mL-1 and in darker-colored instant coffees at 0.18-0.54 ng mL-1.

Molecular Guide for Selecting Green Deep Eutectic Solvents with High Monosaccharide Solubility for Food Applications

Monosaccharides play a vital role in the human diet due to their interesting biological activity and functional properties. Conventionally, sugars are extracted using volatile organic solvents (VOCs). Deep eutectic solvents (DESs) have recently emerged as a new green alternative to VOCs. Nonetheless, the selection criterion of an appropriate DES for a specific application is a very difficult task due to the designer nature of these solvents and the theoretically infinite number of combinations of their constituents and compositions. This paper presents a framework for screening a large number of DES constituents for monosaccharide extraction application using COSMO-RS. The framework employs the activity coefficients at infinite dilution (γ_i^∞) as a measure of glucose and fructose solubility. Moreover, the toxicity analysis of the constituents is considered to ensure that selected constituents are safe to work with. Finally, the obtained viscosity predictions were used to select DESs that are not transport-limited. To provide more insights into which functional groups are responsible for more effective monosaccharide extraction, a structure-solubility analysis was carried out. Based on an analysis of 212 DES constituents, the top-performing hydrogen bond acceptors were found to be carnitine, betaine, and choline chloride, while the top-performing hydrogen bond donors were oxalic acid, ethanolamine, and citric acid. A research initiative was presented in this paper to develop robust computational frameworks for selecting optimal DESs for a given application to develop an effective DES design strategy that can aid in the development of novel processes using DESs.

ReS2 Nanoflowers-Assisted Confined Growth of Gold Nanoparticles for Ultrasensitive and Reliable SERS Sensing

ReS₂, as a new member of transition metal dichalcogenides (TMDCs), has emerged as a promising substrate for semiconductor surface-enhanced Raman spectroscopy (SERS) due to its unique optoelectronic properties. Nevertheless, the sensitivity of the ReS₂ SERS substrate poses a significant challenge to its widespread application in trace detection. In this work, we present a reliable approach for constructing a novel ReS₂/AuNPs SERS composite substrate, enabling ultrasensitive detection of trace amounts of organic pesticides. We demonstrate that the porous structures of ReS₂ nanoflowers can effectively confine the growth of AuNPs. By precisely controlling the size and distribution of AuNPs, numerous efficient and densely packed "hot spots" were created on the surface of ReS₂ nanoflowers. As a result of the synergistic enhancement of the chemical and electromagnetic mechanisms, the ReS₂/AuNPs SERS substrate demonstrates high sensitivity, good reproducibility, and superior stability in detecting typical organic dyes such as rhodamine 6G and crystalline violet. The ReS₂/AuNPs SERS substrate shows an ultralow detection limit of 10^-10 M and a linear detection of organic pesticide molecules within 10^-6-10^-10 M, which is significantly lower than the EU Environmental Protection Agency regulation standards. The strategy of constructing ReS₂/AuNPs composites would contribute to the development of highly sensitive and reliable SERS sensing platforms for food safety monitoring.

Hydrophobic Deep Eutectic Solvents as Greener Substitutes for Conventional Extraction Media: Examples and Techniques

Deep eutectic solvents (DESs) are multicomponent designer solvents that exist as stable liquids over a wide range of temperatures. Over the last two decades, research has been dedicated to developing noncytotoxic, biodegradable, and biocompatible DESs to replace commercially available toxic organic solvents. However, most of the DESs formulated until now are hydrophilic and disintegrate via dissolution on coming in contact with the aqueous phase. To expand the repertoire of DESs as green solvents, hydrophobic DESs (HDESs) were prepared as an alternative. The hydrophobicity is a consequence of the constituents and can be modified according to the nature of the application. Due to their immiscibility, HDESs induce phase segregation in an aqueous solution and thus can be utilized as an extracting medium for a multitude of compounds. Here, we review literature reporting the usage of HDESs for the extraction of various organic compounds and metal ions from aqueous solutions and absorption of gases like CO₂. We also discuss the techniques currently employed in the extraction processes. We have delineated the limitations that might reduce the applicability of these solvents and also discussed examples of how DESs behave as reaction media. Our review presents the possibility of HDESs being used as substitutes for conventional organic solvents.

Thermal-Driven Formation of Silver Clusters Inside Na/Li FAUY Zeolites for Formaldehyde Detection

In this research, the LiY zeolite was firstly synthesized by using NaY as the parent zeolite; thereafter, the LiYAg and NaYAg zeolites created for formaldehyde gas detection were prepared with further Ag⁺-Li⁺/Na⁺ exchange and a mild thermal treatment at 300 °C to promote the formation of luminescent Ag CLs. The spectra experimental results indicated that Ag CLs showed stronger and blue-shifted emissions in LiYAg compared with in NaYAg, and the emission intensity of Ag CLs in both zeolites monotonously decreased when exposed to increasing formaldehyde gas content. Moreover, the linear dependence of the Ag CLs' emission intensity variation on formaldehyde content indicated a reliable method for fast and sensitive formaldehyde detection. According to the XPS, UV-vis absorption, and N₂ adsorption-desorption isotherm studies, the formaldehyde-gas-induced luminescence quenching of Ag CLs is due to the formation of Ag₂O and Ag NPs, in which the higher content of Ag⁺/Ag⁰ redox couples in LiYAg and larger surface area of NaYAg benefit the precise detection of formaldehyde gas in low- and high-content ranges, respectively. Furthermore, the blue-shifted peak position and widened FWHM of Ag CLs can also be used for the indication of formaldehyde gas and the detection limit of NaYAg and LiYAg, which both meet with the standards of the WHO and OSHA.

A novel room-temperature formaldehyde gas sensor based on walnut-like WO3 modification on Ni–graphene composites

Ternary composite with great modulation of electron transfers has attracted a lot of attention from the field of high-performance room-temperature (RT) gas sensing. Herein, walnut-like WO3-Ni–graphene ternary composites were successfully synthesized by the hydrothermal method for formaldehyde (HCHO) sensing at RT. The structural and morphological analyses were carried out by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). SEM and TEM studies confirmed that walnut-like WO3 nanostructures with an average size of 53 ± 23 nm were functionalized. The Raman and XPS results revealed that, due to the deformation of the O-W-O lattice, surface oxygen vacancies Ov and surface-adsorbed oxygen species Oc were present. The gas-sensing measurement shows that the response of the WO3-Ni-Gr composite (86.8%) was higher than that of the Ni-Gr composite (22.7%) for 500 ppm HCHO at RT. Gas-sensing enhancement can be attributed to a p-n heterojunction formation between WO3 and Ni-Gr, Oc, spill-over effect of Ni decoration, and a special walnut-like structure. Moreover, long term stability (%R = 61.41 ± 1.66) for 30 days and high selectivity in the presence of other gases against HCHO suggested that the proposed sensor could be an ideal candidate for future commercial HCHO-sensing in a real environment.

Deep Eutectic Solvent-Based Coating Sorbent for Preconcentration of Formaldehyde by Thin-Film Solid-Phase Microextraction Technique

A thin-film solid-phase microextraction method with a sorbent composed of a deep eutectic solvent was developed for the preconcentration of formaldehyde from river and lake water samples. Four new deep eutectic solvents (DESs) were synthesized, each in molar ratios 1:1, 1:2, and 1:3. Among prepared compounds, the greatest efficiency in the proposed method of preconcentration of formaldehyde derivatized with Nash reagent was demonstrated by DES-3 consisting of benzyldimethylhexadecylammonium chloride and lauric acid, in a molar ratio of 1:3. For the proposed method, the parameters affecting the extraction efficiency of formaldehyde were optimized (including the choice of DES-based sorbent and desorption solvent as well as the sample volume and pH, the salting-out effect, the extraction time, and the desorption time). Under optimal conditions, the proposed method achieved good precision between 3.3% (for single sorbent) and 4.8% (for sorbent-to-sorbent) as well as good recovery ranging from 78.0 to 99.1%. The limits of detection and quantitation were 0.15 ng mL−1 and 0.50 ng mL−1, respectively. The enrichment factor was equal to 178. The developed method was successfully applied to determine formaldehyde in environmental water samples.

Application of Extraction and Determination Based on Deep Eutectic Solvents in Different Types of Environmental Samples

Water sources are an indispensable resource for human survival. Monitoring the pollution status of the surrounding environment is necessary to protect water sources. Research on the environmental matrix of deep eutectic solvents (DESs) has expanded rapidly because of their high extraction efficiency for various target analytes, controllable synthesis, and versatile structure. Following the synthesis of hydrophobic deep eutectic solvents (HDESs), their application in aqueous matrices broadened greatly. The present review conducted a survey on the pollutant extraction methods based DESs in environmental matrices from two aspects, application methods and matrix types; discussed the potential risk of DESs to the environment and future development trends; and provided some references for researchers to choose DES-based extraction methods for environmental research.

Highly efficient selective extraction of Mo with novel hydrophobic deep eutectic solvents

Recycling of valuable metals from spent catalysts in a green way is gaining extensive interest for economic and environment reasons. In this study, we developed novel hydrophobic deep eutectic solvents to extract Mo from spent catalysts. The hydrophobic DESs have been designed and synthesized by mixing one molar of the quaternary ammonium salt and two molars of various saturated fatty acids with different carbon chain lengths. The extraction ability and extraction mechanism of these DESs were studied, some factors influencing the extraction efficiency, including the structure of hydrogen bond acceptors and hydrogen bond donors, initial aqueous pH, reaction time and temperature, phase ratios were investigated. It is found that the synthesized hydrophobic DESs exhibit excellent extraction performance toward Mo, where the Mo distribution ratio is more than 2200 in the presence of other metals, corresponding to an extraction efficiency of 99% at optimal reaction conditions. This work reveals a distinct class of materials, guiding an effective and green way for spent catalyst treatment.Implications: Novel hydrophobic deep eutectic solvents have been developed to extract Mo from spent catalysts, the synthesized hydrophobic DESs possess several advantages, such as green, low price, low toxicity, and biodegradability. It exhibits excellent extraction performance under an optimized extraction condition. This work reveals a distinct class of materials, guiding a promising way for green and economical utilization of spent catalysts.

Deep eutectic solvent extraction of cortisol and cortisone from human saliva followed by LC-UV analysis

A novel extraction method was developed for the determination of cortisol and cortisone. In this study, we prepared a hydrophobic deep eutectic solvent (DES) by mixing trioctylmethylammonium chloride and pentafluorophenol as a hydrogen bond acceptor and a hydrogen bond donor, respectively, for use as the extraction solvent. The extraction of cortisol and cortisone was performed by adding a small volume of the DES to the aqueous sample. After centrifugation, the resulting sedimented DES phase was injected into a reversed-phase liquid chroamtography column, and the analytes were detected with an ultraviolet detector at 254 nm. Under the optimized extraction conditions, the enrichment factors of cortisol and cortisone were 9.3 and 8.5, respectively. Furthermore, the linear dynamic ranges were established over a concentration range of 10-200 pmol mL^-1 (r² > 0.9992), and the limits of detection of cortisol and cortisone were found to be 2.1 and 1.8 pmol mL^-1, respectively. The applicability of this method was evaluated by analyzing the cortisol and cortisone contents of human saliva samples.

Preparation of new hydrophobic deep eutectic solvents and their application in dispersive liquid-liquid microextraction of Sudan dyes from food samples

In this work, a new generation of hydrophobic deep eutectic solvents (DESs) was prepared using eugenol (as hydrogen bond donor) and benzyltriethylammonium bromide, benzyltributylammonium bromide, benzyltriethylammonium chloride and benzyltributylammonium chloride (as hydrogen bond acceptor) in different molar ratios. These DESs were applied to vortex-assisted dispersive liquid-liquid microextraction of Sudan dyes from food samples, followed by high-performance liquid chromatographic determination. The influencing parameters, including the type of DES, amount of DES, extraction time, solution pH and salt addition, were investigated and optimized. Under the optimized conditions, a linear range of 2-1000 ng mL^-1 with determination coefficients of <0.999 was obtained. Limits of detection and limits of quantification were in the range of 0.5 to 1 ng mL^-1 and 2 to 3 ng mL^-1, respectively. The proposed method was successfully used in the determination of Sudan dyes in chili sauce, chili powder and ketchup, and satisfactory recoveries of between 89.9 and 119.3% were obtained, with relative standard deviations in the range of 0.1-6.8%. The proposed method is simple, green and efficient, and can be applied to determine Sudan dyes in complex matrices.

Air-assisted liquid-liquid microextraction based on the solidification of floating deep eutectic solvents for the simultaneous determination of bisphenols and polycyclic aromatic hydrocarbons in tea infusions via HPLC

Deep eutectic solvents (DESs) are a new class of green "designer solvent"; its physicochemical properties can be easily tuned by adjusting DES' constituents, chemical ratio and water content. In this study, three hydrophobic DESs with low viscosity, low density, and melting points close to room temperature were designed and synthesized. Based on these DESs, an air-assisted liquid-liquid microextraction technique was developed based on the solidification of floating DESs for the simultaneous determination of bisphenols and polycyclic aromatic hydrocarbons (PAHs) via HPLC. The microextraction parameters were optimized via the Plackett-Burman design and response surface methodologies. The method shows satisfactory linearity (R² ≥ 0.9928), a low limit of detection (0.16-0.75 μg L^-1) and satisfactory precision (≤2.3%), and was successfully applied for the simultaneous determination of bisphenols and PAHs from tea infusions with satisfactory recoveries (82.0-116.6%). This method is simple, rapid, economical, environmentally compatible, dispersive solvent-frees and centrifugation-free, and has promising applications in food safety.

Analysis of six preservatives in beverages using hydrophilic deep eutectic solvent as disperser in dispersive liquid-liquid microextraction based on the solidification of floating organic droplet

In this work, a deep eutectic solvent (DES) composed of tetrabutylammonium bromide (TBABr) and acetic acid in a 1:2 M ratio was applied as the dispersive solvent for the dispersive liquid-liquid microextraction based on solidification of floating organic droplet (DLLME-SFO), using 1-decanol as extractant. Six preservatives (benzoic acid, BA; sorbic acid, SA; methyl paraben, MP; ethyl paraben, EP; propyl paraben PP; and butyl paraben, BP) in beverages were determined simultaneously through high-performance liquid chromatography with a diode array detector (HPLC-DAD). Under the optimal experimental condition that consists of 200 μL of disperser (TBABr: acetic acid, 1:2), 80 μL of extractant (1-decanol), 3 min of vortex time, 4.5 of pH, 2.5 g of NaCl, the proposed method showed satisfactory linearity in the range of 0.05-50.0 mg L^-1, with a correlation coefficient (R²) higher than 0.9998. The limits of detection (LODs) varied from 0.02 to 0.05 mg L^-1 and the limits of quantification (LOQs) varied from 0.05-0.1 mg L^-1. The relative standard deviations (intra-day and inter-days) were below 5 %. The developed method was successfully applied to the determination of preservatives in beverages.

Flexible and Reusable Ag Coated TiO2 Nanotube Arrays for Highly Sensitive SERS Detection of Formaldehyde

Quantitative analysis of formaldehyde (HCHO, FA), especially at low levels, in various environmental media is of great importance for assessing related environmental and human health risks. A highly efficient and convenient FA detection method based on surface-enhanced Raman spectroscopy (SERS) technology has been developed. This SERS-based method employs a reusable and soft silver-coated TiO₂ nanotube array (TNA) material, such as an SERS substrate, which can be used as both a sensing platform and a degradation platform. The Ag-coated TNA exhibits superior detection sensitivity with high reproducibility and stability compared with other SERS substrates. The detection of FA is achieved using the well-known redox reaction of FA with 4-amino-3-hydrazino-5-mercapto-1,2,4-triazole (AHMT) at room temperature. The limit of detection (LOD) for FA is 1.21 × 10⁻⁷ M. In addition, the stable catalytic performance of the array allows the degradation and cleaning of the AHMT-FA products adsorbed on the array surface under ultraviolet irradiation, making this material recyclable. This SERS platform displays a real-time monitoring platform that combines the detection and degradation of FA.

Highly efficient extraction/separation of Cr (VI) by a new family of hydrophobic deep eutectic solvents

Highly efficient and selective separation of Cr (VI) is great of importance in environmental pollution control. In this study, a novel family of hydrophobic DESs has been designed and synthesized by mixing parabens and quaternary ammonium, and then used to extract heavy metal Cr (VI) from water phase and the content of Cr (VI) is measured by 1,5-diphenylcarbazide spectrophotometry. It is found that the hydrophobic DESs exhibit excellent extraction performance towards Cr (VI). At the 1:1 M ratio of DES to Cr (VI), the extraction capacity is as high as 66.7 mg g^-1, the extraction efficiency is greater than 90% for ultra-trace Cr (VI) (0.51 μg L^-1), and the preconcentration factor is up to 700. When the concentration of coexisting metal ions (Cd²⁺, Cu²⁺) and organic compounds ((C₆H₁₀O₅)_n, C₆H₁₂O₆·H₂O) is 2000 times that of Cr (VI), the extraction efficiency is still above 90%. Compared with ionic liquid extractants, the preparation process of DES is very simple, the atomic utilization rate is 100%, and no waste is produced. These hydrophobic DESs have been used to separate and enrich Cr (VI) from actual water samples with satisfactory recoveries. The possible extraction mechanism is investigated by FT-IR and ¹H NMR.

Air-assisted liquid-liquid microextraction based on solidification of floating deep eutectic solvent for the analysis of ultraviolet filters in water samples by high performance liquid chromatography with the aid of response surface methodology

For this work, a novel air-assisted liquid-liquid microextraction based on solidification of floating deep eutectic solvent (AA-LLME-SFDES), coupled with a high performance liquid chromatography (HPLC) method was developed for the detection of benzophenone and salicylate ultraviolet filters in water samples. Three types of fatty acid-based hydrophobic deep eutectic solvents (DESs) with low viscosity, low-density, and melting point close to room temperature were prepared and employed as extraction solvents. This air-assisted liquid-liquid microextraction was carried out in a glass centrifuge tube. Subsequently, the glass tube was introduced into ice-water bath and held for 3 min, during which the upper DES phase was solidified. The water phase was easily extracted using a syringe equipped with a long needle, and later, the glass tube was removed from ice-water bath. The solidified DES phase was immediately melted at room temperature and used for HPLC analysis. The response surface methodology was employed to optimize some influencing parameters such as the volume of the extraction solvent, the pH value of sample solution, the number of extraction cycles, and the addition of salt. A quadratic model, namely a central composite design, was used to replace the conventional single factor analysis. It was found that under optimal conditions, the limits of determination and quantification were 0.045-0.54 µg L^-1 and 0.15-2.0 µg L^-1, respectively. The relative standard deviations for inter-day (n = 5) and intra-day (n = 5) precision were ≤ 4.2%, whereas the enrichment factors for the ultraviolet filters were obtained from 41 to 50. Furthermore, this novel method was successfully employed for the detection of benzophenone and salicylate ultraviolet filters from real water samples. The recoveries ranged from 87.5% to 105.8%, whereas the RSDs were lower than 3.6%.