Proteomics analysis of host cell proteins after immobilized metal affinity chromatography: Influence of ligand and metal ions

Direct purification and immobilization of his-tagged enzymes using unmodified nickel ferrite NiFe2O4 magnetic nanoparticles

Purification of valuable engineered proteins and enzymes can be laborious, costly, and generating large amount of chemical waste. Whilst enzyme immobilization can enhance recycling and reuse of enzymes, conventional methods for immobilizing engineered enzymes from purified samples are also inefficient with multiple-step protocols, regarding both the carrier preparation and enzyme binding. Nickel ferrite magnetic nanoparticles (NiFe2O4 MNPs) offer distinct advantages in both purification and immobilization of enzymes. In this work, we demonstrate the preparation of NiFe2O4 MNPs via a one-step solvothermal synthesis and their use in direct enzyme binding from cell lysates. These NiFe2O4 MNPs have showed an average diameter of 8.9 ± 1.7 nm from TEM analysis and a magnetization at saturation (Ms) value of 53.0 emu g-1 from SQUID measurement. The nickel binding sites of the MNP surface allow direct binding of three his-tagged enzymes, D-phenylglycine aminotransferase (D-PhgAT), Halomonas elongata ω-transaminase (HeωT), and glucose dehydrogenase from Bacillus subtilis (BsGDH). It was found that the enzymatic activities of all immobilized samples directly prepared from cell lysates were comparable to those prepared from the conventional immobilization method using purified enzymes. Remarkably, D-PhgAT supported on NiFe2O4 MNPs also showed similar activity to the purified free enzyme. By comparing on both carrier preparation and enzyme immobilization protocols, use of NiFe2O4 MNPs for direct enzyme immobilization from cell lysate can significantly reduce the number of steps, time, and use of chemicals. Therefore, NiFe2O4 MNPs can offer considerable advantages for use in both enzyme immobilization and protein purification in pharmaceutical and other chemical industries.

L-Arginine sulfate reduces irreversible protein binding in immobilized metal affinity chromatography

Immobilized metal affinity chromatography (IMAC) is a powerful technique for capture and purification of relevant biopharmaceuticals in complex biological matrices. However, protein recovery can be drastically compromised due to surface induced spreading and unfolding of the analyte, leading to fouling of the stationary phase. Here, we report on the kinetics of irreversible adsorption of a protease on an IMAC resin in a time span ranging from minutes to several hours. This trend correlated with the thermal data measured by nano differential scanning calorimetry, and showed a time-dependent change in protein unfolding temperature. Our results highlight that 'soft' proteins show a strong time dependent increase in irreversible adsorption. Furthermore, commonly used co-solvents for preservation of the native protein conformation are tested for their ability to reduce fouling. Thermal data suggests that the amino acid l-arginine is beneficial in preventing unfolding, which was confirmed in batch adsorption experiments. The choice of counter-ions has to be considered when using this amino acid. These results show that l-arginine sulfate decelerates the irreversible adsorption kinetics of proteins on the IMAC stationary phase to a greater extent than l-arginine chloride.

Metal organic frameworks-in-nanochannels: A tailorable chromatography membrane for isolation of target protein

Metal-organic frameworks (MOFs) demonstrate strong potential in biosample separation. However, the obtained MOFs powders are unsuitable for recovery techniques in an aqueous solution, especially the challenges of withdrawing MOFs particles and expanding their functions for specific applications. Herein, a general strategy is designed utilizing metal oxide-nanochannel arrays as precursors and templates for in-situ selective growth of MOFs structures. The exemplary MOFs (Ni-bipy) with tailored composition are selectively grown in NiO/TiO₂ nanochannel membrane (NM) using NiO as the sacrificial precursor, which enables one to achieve a ∼262 times concentration of histidine-tagged proteins within 100 min. The significantly improved adsorption efficiency in a wide pH range and the effective enrichment from a complex matrix as a nanofilter illustrate the great potential of MOFs in nanochannels membranes for the high-efficiency recovery of essential proteins in complex biological samples. The porous self-aligned Ni-MOFs/TiO₂ NM exhibits biocompatibility and flexible functionalities, which is desirable for the generation of multifunctional nanofilter devices and developing biomacromolecule delivery vehicles.

Tagging Recombinant Proteins to Enhance Solubility and Aid Purification

Protein fusion technology has had a major impact on the efficient production and purification of individual recombinant proteins. The use of genetically engineered affinity and solubility-enhancing polypeptide "tags" has a long history, and there is a considerable repertoire of these that can be used to address issues related to the expression, stability, solubility, folding, and purification of their fusion partner. In the case of large-scale proteomic studies, the development of purification procedures tailored to individual proteins is not practicable, and affinity tags have become indispensable tools for structural and functional proteomic initiatives that involve the expression of many proteins in parallel. In this chapter, the rationale and applications of a range of established and more recently developed solubility-enhancing and affinity tags is described.

Increase in cysteine-mediated multimerization under attractive protein-protein interactions

The CASPON enzyme became an interesting enzyme for fusion protein processing because it generates an authentic N-terminus. However, the high cysteine content of the CASPON enzyme may induce aggregation via disulfide-bond formation, which can reduce enzymatic activity and be considered a critical quality attribute. Different multimerization states of the CASPON enzyme were isolated by preparative size exclusion chromatography and analyzed with respect to multimerization propensity and enzymatic activity. The impact of co-solutes on multimerization was studied in solution and in adsorbed state. Furthermore, protein-protein interactions in the presence of different co-solutes were measured by self-interaction chromatography and were then correlated to the multimerization propensity. The dimer was the most stable and active species with 50% higher enzymatic activity than the tetramer. Multimerization was mainly governed by a cysteine-mediated pathway, as indicated by DTT-induced reduction of most caspase multimers. In the presence of ammonium sulfate, attractive protein-protein interactions were consistent with those observed for higher multimerization when the cysteine-mediated pathway was followed. Multimerization was also observed under attractive conditions on a chromatographic stationary phase. These findings corroborate common rules to perform protein purification with low residence time to avoid disulfide bond formation and conformational change of the protein upon adsorption.

Production of full-length SARS-CoV-2 nucleocapsid protein from Escherichia coli optimized by native hydrophobic interaction chromatography hyphenated to multi-angle light scattering detection

The nucleocapsid protein (NP) of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is critical for several steps of the viral life cycle, and is abundantly expressed during infection, making it an ideal diagnostic target protein. This protein has a strong tendency for dimerization and interaction with nucleic acids. For the first time, high titers of NP were expressed in E. coli with a CASPON tag, using a growth-decoupled protein expression system. Purification was accomplished by nuclease treatment of the cell homogenate and a sequence of downstream processing (DSP) steps. An analytical method consisting of native hydrophobic interaction chromatography hyphenated to multi-angle light scattering detection (HIC-MALS) was established for in-process control, in particular, to monitor product fragmentation and multimerization throughout the purification process. 730 mg purified NP per liter of fermentation could be produced by the optimized process, corresponding to a yield of 77% after cell lysis. The HIC-MALS method was used to demonstrate that the NP product can be produced with a purity of 95%. The molecular mass of the main NP fraction is consistent with dimerized protein as was verified by a complementary native size-exclusion separation (SEC)-MALS analysis. Peptide mapping mass spectrometry and host cell specific enzyme-linked immunosorbent assay confirmed the high product purity, and the presence of a minor endogenous chaperone explained the residual impurities. The optimized HIC-MALS method enables monitoring of the product purity, and simultaneously access its molecular mass, providing orthogonal information complementary to established SEC-MALS methods. Enhanced resolving power can be achieved over SEC, attributed to the extended variables to tune selectivity in HIC mode.

Production of Circularly Permuted Caspase-2 for Affinity Fusion-Tag Removal: Cloning, Expression in Escherichia coli, Purification, and Characterization

Caspase-2 is the most specific protease of all caspases and therefore highly suitable as tag removal enzyme creating an authentic N-terminus of overexpressed tagged proteins of interest. The wild type human caspase-2 is a dimer of heterodimers generated by autocatalytic processing which is required for its enzymatic activity. We designed a circularly permuted caspase-2 (cpCasp2) to overcome the drawback of complex recombinant expression, purification and activation, cpCasp2 was constitutively active and expressed as a single chain protein. A 22 amino acid solubility tag and an optimized fermentation strategy realized with a model-based control algorithm further improved expression in Escherichia coli and 5.3 g/L of cpCasp2 in soluble form were obtained. The generated protease cleaved peptide and protein substrates, regardless of N-terminal amino acid with high activity and specificity. Edman degradation confirmed the correct N-terminal amino acid after tag removal, using Ubiquitin-conjugating enzyme E2 L3 as model substrate. Moreover, the generated enzyme is highly stable at -20 °C for one year and can undergo 25 freeze/thaw cycles without loss of enzyme activity. The generated cpCasp2 possesses all biophysical and biochemical properties required for efficient and economic tag removal and is ready for a platform fusion protein process.