High sensitivity capillary electrophoresis with fluorescent detection for glycan mapping

Digital capillary electrophoresis with dual preconcentration for sub-microliter samples: A proof-of-concept for glycan analysis

We present in this study the development of digital capillary electrophoresis (DCE), together with a dual-stage on-line electrokinetic preconcentration protocol for hydrodynamic injection and capillary electrophoresis (CE) separation of N-glycans from a microdroplet. Several features that were not met in previous droplet-interfaced CE systems could now be realized with the DCE system that is based on a hybrid setup of micro-syringes and miniature pressure controllers. It allows i) working with a preprocessed sample volume as small as 500 nL, ii) and precise injection of a sub-microliter sample droplet into the capillary without penetration of oil inside nor current leakage during CE separation. Furthermore, the DCE was coupled with a new way of dual-stage electrokinetic preconcentration method combining large volume sample stacking with electroosmotic pump (LVSEP) and transient-isotachophoresis (tITP) to allow enrichment of the analytes from quasi-totality of the sample microdroplet to drastically boost the detection sensitivity. The DCE platform with the dual-stage LVSEP-tITP method brings a solution to overcome some major actual challenges in microscale electrophoresis, notably incompatibility of the working volumes and unsatisfactory detection sensitivity. To demonstrate the significance of DCE-LVSEP-tITP, the system and the dual-stage preconcentration protocol were applied for CE separation and fluorescent detection by LED induced fluorescence (LEDIF) of a labelled malto-oligosacharride ladder (MD Ladder) and N-glycans released from human IgG. With the best LVSEP-tITP conditions using the background electrolyte composed of triethanolamine (TEOA)/citric acid at pH 4.75 and ionic strength (IS) of 150 mM, the leading electrolyte composed of 8.0 μM APTS in deionized water and the terminating electrolyte composed of TEOA/citric acid at pH 3.0 and IS of 200 mM, excellent sample enrichment factors (SEFs) could be obtained for glucose oligomers with good repeatability on migration time and peak area (RSD <1.0 % and 5.0 %, respectively). Our approach offers sample enrichment factors (SEFs) up to 620 folds compared to that obtained with our CE-LIF approach for glycan analysis, and 2400 compared to that achieved with the reference capillary gel electrophoresis method with laser induced fluorescence detection (CGE-LIF), allowing to reach the detection and quantification limits for CE-LIF of glycans down to 0.03 and 0.1 ng/mL, respectively.

Analysis of carbohydrates and glycoconjugates by matrix-assisted laser desorption/ionization mass spectrometry: An update for 2021-2022

The use of matrix-assisted laser desorption/ionization (MALDI) mass spectrometry for the analysis of carbohydrates and glycoconjugates is a well-established technique and this review is the 12th update of the original article published in 1999 and brings coverage of the literature to the end of 2022. As with previous review, this review also includes a few papers that describe methods appropriate to analysis by MALDI, such as sample preparation, even though the ionization method is not MALDI. The review follows the same format as previous reviews. It is divided into three sections: (1) general aspects such as theory of the MALDI process, matrices, derivatization, MALDI imaging, fragmentation, quantification and the use of computer software for structural identification. (2) Applications to various structural types such as oligo- and polysaccharides, glycoproteins, glycolipids, glycosides and biopharmaceuticals, and (3) other general areas such as medicine, industrial processes, natural products and glycan synthesis where MALDI is extensively used. Much of the material relating to applications is presented in tabular form. MALDI is still an ideal technique for carbohydrate analysis, particularly in its ability to produce single ions from each analyte and advancements in the technique and range of applications show little sign of diminishing.

Investigation of on-line electrokinetic enrichment strategies for capillary electrophoresis of extracellular vesicles

This work explores strategies for electrokinetic preconcentration of extracellular vesicles (EVs) that are potential source of biomarkers for different diseases. The first approach that led to successful preconcentration of EVs is based on large volume sample stacking (LVSS), allowing an enrichment factor of 7 for CE of EVs with long-end injection (using a capillary with an effective length of 50 cm). Attempts were also made to perform multiple cycles of LVSS, field amplified sample stacking (FASS) and field amplified sample injection (FASI), to improve EVs preconcentration performance. The focus was then put on development of capillary isotachophoresis under high ionic strengths (IS) for electrokinetic enrichment of slow migrating EVs having heterogeneous mobilities. This approach relies on the use of extremely high concentrations of the terminating electrolyte (TE) to slow down the mobility of TE co-ions, rendering them slower than those of EVs. The limit of detection for intact EVs using the developed ITP-UV method reached 8.3 × 108 EVs/mL, allowing an enrichment of 25 folds and a linear calibration up to 4 × 1010 EVs/mL. The ITP-UV and ITP-LIF approaches were applied to provide the electrokinetic signature of EVs of bovine milk and human plasma as well as to visualize more specifically intravesicular fluorescently labelled EVs. The investigation of these strategies shredded light into the challenges still encountered with electrokinetic preconcentration and separation of heterogeneous EVs sub-populations which are discussed herein based on our results and other attempts reported in the literature.

Capillary Electrophoresis-Laser Induced Fluorescence Method Development and Validation for Quantification of Nine Gangliosides-Application to Analysis of Cell Lines of CNS Origin

Gangliosides are sialic acid-containing glycosphingolipids that play an essential role in many biological and pathophysiological processes. They are present in high amounts in the central nervous system and their abnormal metabolism or expression has been observed in many diseases. We have developed and validated a sensitive capillary electrophoresis laser-induced fluorescence (CE-LIF) method for the separation and quantification of oligosaccharides digested from nine gangliosides of high biological relevance. APTS was used for the labeling of the glycans. Reverse polarity CE was performed for the separation of the labeled glycans bearing negative charges. The optimized background electrolyte is a 15 mM lithium acetate buffer with pH of 5 containing 5% w/v linear polyacrylamide, which allows for the separation of all nine gangliosides. Validation parameters including linearity, precision, and accuracy were evaluated. LOQ and LOD were in the nM range, comparable to those of LC-MS techniques. The method was used to identify and quantify the ganglioside pattern of glioblastoma and neuroblastoma cell lines. The presented method is a valuable tool for further investigations aiming at understanding the role of gangliosides in various neurological diseases or CNS tumors.

Gels in Microscale Electrophoresis

Gel matrices are fundamental to electrophoresis analyses of biopolymers in microscale channels. Both capillary gel and microchannel gel electrophoresis systems have produced fundamental advances in the scientific community. These analytical techniques remain as foundational tools in bioanalytical chemistry and are indispensable in the field of biotherapeutics. This review summarizes the current state of gels in microscale channels and provides a brief description of electrophoretic transport in gels. In addition to the discussion of traditional polymers, several nontraditional gels are introduced. Advances in gel matrices highlighted include selective polymers modified to contain added functionality as well as thermally responsive gels formed through self-assembly. This review discusses cutting-edge applications to challenging areas of discovery in DNA, RNA, protein, and glycan analyses. Finally, emerging techniques that result in multifunctional assays for real-time biochemical processing in capillary and three-dimensional channels are identified.

On-line dual-stage enrichment via magneto-extraction and electrokinetic preconcentration: A new concept and instrumentation for capillary electrophoresis

This study reports on the development of a new concept of on-line dual preconcentration stages for capillary electrophoresis (CE), in which two completely different preconcentration approaches can be realized in the same capillary. In the first stage, a dynamic magneto-extraction of target analytes on circulating magnetic beads is implemented within the capillary. In the second one, electrokinetic preconcentration of eluted analytes via large volume sample stacking is carried out to focus them into a nano band, prior to CE separation of enriched analytes. To implement the dual-stage preconcentration operation, a purpose-made instrument was designed, combining electrophoretic and microfluidic modules to allow precise control of the movement of magnetic beads and analyte's flow. The potential of this new enrichment principle and its associated instrument was demonstrated for CE separation with light-emitting-diode-induced fluorescent (LEDIF) detection of target double-stranded DNA (ds-DNA). The workflow consists of purification and preconcentration of a target DNA fragment (300 bp) on negatively charged magnetic beads, followed by in-capillary elution and fluorescent labelling of the enriched DNA. Large volume sample stacking of the DNA eluent was then triggered to further preconcentrate the labelled DNA before its analysis by CE-LEDIF. An enrichment factor of 125 was achieved for the target DNA fragment. With our new approach, dual-stage sample pretreatment and CE separation can now be performed in-capillary without any mismatch of working volumes, nor any waste of pretreated samples.

On-capillary fluorescent labeling of saccharides for capillary electrophoresis

The feasibility of on-capillary derivatization of saccharides by aromatic amine-based fluorescent labeling agents was tested. To avoid the problematic evolution of gaseous hydrogen cyanide, the Schiff base reduction by sodium cyanoborohydride, as the second step of the standard reductive amination protocol, was omitted. Glucose was used as a model analyte and 7-amino-1,3-naphthalenedisulfonic acid as the labeling agent. Our experiments showed that the direct reaction of the saccharide with the labeling agent in 2.5-M acetic acid yields a labeled product that is sufficiently stable to be separated from the labeling agent in 20-mM phosphate buffer, pH 3.5, and detected using UV detection. The glucose and label zones were introduced separately into the capillary and mixed using a negative voltage. Mixing voltage, its duration, the concentration of acetic acid in the reaction zone, and the waiting time between mixing and separation were optimized. To show the applicability of the procedure to a broader range of analytes, a mixture of different types of saccharides, that is, xylose (pentose), fucose (hexose), glucose (hexose), N-acetylglucosamine (N-acetylaminosaccharide), and lactose (disaccharide), was subjected to derivatization and analysis under the optimal conditions. The linearity and repeatability of the process were evaluated as critical parameters for its analytical applications. Six-point calibration dependences in the 1-50 mM range showed excellent determination coefficients of 0.9992 or higher for all five saccharides tested. The repeatability of the labeled saccharide peak areas was between 2.2% and 4.3%.

Peptide mapping of proteins by capillary electromigration methods

This review article provides a wide overview of important developments and applications of capillary electromigration methods in the area of peptide mapping of proteins in the period 1997-mid-2022, including review articles on this topic. It deals with all major aspects of peptide mapping by capillary electromigration methods: i) precleavage sample preparation involving purification, preconcentration, denaturation, reduction and alkylation of protein(s) to be analyzed, ii) generation of peptide fragments by off-line or on-line enzymatic and/or chemical cleavage of protein(s), iii) postcleavage preparation of the generated peptide mixture for capillary electromigration separation, iv) separation of the complex peptide mixtures by one-, two- and multidimensional capillary electromigration methods coupled with mass spectrometry detection, and v) a large application of peptide mapping for variable purposes, such as qualitative analysis of monoclonal antibodies and other protein biopharmaceuticals, monitoring of posttranslational modifications, determination of primary structure and investigation of function of proteins in biochemical and clinical research, characterization of proteins of variable origin as well as for protein and peptide identification in proteomic and peptidomic studies.

In capillary labeling and online electrophoretic separation of N-glycans from glycoproteins

In this study, we present a new approach for in-capillary fluorescent labeling of N-glycans prior to their analysis with CE coupled with laser-induced fluorescent detection. This integrated approach allows using a CE capillary as a microreactor to perform several steps required for labeling glycans with 8-aminopyrene-1,3,6 trisulfonic acid and at the same time as a separation channel for CE of fluorescently labeled glycans. This could be achieved through careful optimization of all different steps, including sequential injections of fluorescent dye and glycan plugs, mixing by transverse diffusion of laminar flow profiles, incubation in a thermostatic zone, and finally separation and detection with CE. Such a complex sample treatment protocol for glycan labeling that is feasible thus far only in batchwise mode can now be converted into an automated and integrated protocol. Our approach was applied successfully to analyze fluorescently labeled N-linked oligosaccharides released from human immunoglobulin G and rituximab, a monoclonal antibody used for cancer treatment. We demonstrated the superiority of this in-capillary approach over the conventional in-tube protocol, with fourfold less reagent consumption and full automation without remarkable degradation of the glycan separation profile obtained by capillary electrophoresis.

Liquid chromatography and capillary electrophoresis in glycomic and glycoproteomic analysis

Glycosylation is one of the most significant and abundant post-translational modifications in cells. Glycomic and glycoproteomic analyses involve the characterization of oligosaccharides (glycans) conjugated to proteins. Glycomic and glycoproteomic analysis is highly challenging because of the large diversity of structures, low abundance, site-specific heterogeneity, and poor ionization efficiency of glycans and glycopeptides in mass spectrometry (MS). MS is a key tool for characterization of glycans and glycopeptides. However, MS alone does not always provide full structural and quantitative information for many reasons, and thus MS is combined with some separation technique. This review focuses on the role of separation techniques used in glycomic and glycoproteomic analyses, liquid chromatography and capillary electrophoresis. The most important separation conditions and results are presented and discussed.

Graphical abstract

Multidimensional identification of disaccharide isomers based on non-covalent complexes and tandem mass spectrometry

Glycans are the most abundant organic polymers in nature. They are essential to living organisms and regulate a wide range of biological functions. However, mass spectrometry-based identification of glycan isomers remains challenging due to the complexity of their structures including their complex compositions, linkages, and anomeric configurations. In this study, two novel complex ions, the mononuclear copper-bound dimeric ions [(Cu²⁺)(A)(L-His)-H]⁺ and the mononuclear copper-bound quaternary ions [(Cu²⁺)(A)(L-Ser)₃-H]⁺ (where A denotes a disaccharide, and L-Ser/His denotes l-serine/histidine), were designed for the collision-induced dissociation-based identification and relative quantification of 14 disaccharide isomers. When the unique fragmentation patterns of the above two types of complex ions were mapped into a three-dimensional vector, all the isomers were completely distinguished. Of note, the established method is able to identify mixtures of linkage isomers only using tandem mass spectrometry based on linkage-specific fragment ions of histidine-based complex ions. Finally, the method was successfully applied to the identification and relative quantification of two disaccharide isomers (lactose and sucrose) in dairy beverages. In conclusion, the established method is sensitive to subtle structural differences in disaccharide isomers and has the potential to be used for the differentiation of various glycans.