Edible oleogels: how suitable are proteins as a structurant?

Whey protein-structured oleogels: Effect of α-lactalbumin addition and ultrasonication treatment on oleogelation

Research on oleogels has a health and sustainability imperative for reducing saturated-fat intake. Herein, the physicochemical properties of whey protein aggregates (WPA) with α-lactalbumin (α-La) addition (5-10 %), ultrasonication (1-2 min), and heating process (85-95 °C), and consequently, the functional characteristics of WPA-based oleogels (WPO) and their potential for replacing commercial butter were investigated. More α-La incorporation and longer ultrasonication increased the hydrogen bonding and β-sheet (34 %-50 %), while reduced random coil of WPA (27 %-11 %), which promoted WPA formation, increased WPA structural density, and led to a decline in particle size of WPA driven by surface hydrophobicity decrease. Therefore, the WPO exhibited excellent oil-holding capacity, thermal stability, viscoelasticity and spreadability. WPO consisted of 95 °C-heated WPA with 5 % α-La addition or 1 min-ultrasonication showed textural and rheological behavior similar to butter. These results contribute to the formulation of whey protein oleogels with controlled physicochemical and functional properties, showing potential being applied as fat substitutes.

Oleogel formation based on natural insoluble soybean fiber using capillary force: A novel strategy and application

Insoluble dietary fibers can be used as oleogelators to form oleogels via molecular self-assembly following chemical modification. However, the limitations of traditional chemical modifications and oleogel preparation methods significantly restrict their practical application. This study proposed a novel method to directly form edible oleogels using natural soybean insoluble fiber particles as oil-forming agents and water as a secondary fluid via the capillary suspension force between particles. The results showed that when the particle fraction was 15 % and the secondary fluid content was 0.2, a strong capillary suspension force could be formed to maintain the oil holding capacity of oleogels. The sedimentation coefficient analysis suggested that adding particles and secondary fluids significantly affected the oleogel stability. The polarity of the oils, as well as the ionic strength and pH of the secondary fluids, influenced the rheological properties of oleogels, which correlated with the interfacial tension between the secondary fluids and oils. Moreover, the stable oleogels showed their potential as excellent solid fat substitutes in the preparation of breads (specific volume = 2.029 ± 0.114 cm3/g, weight loss = 12.2 ± 2.6 %, and hardness = 3.321 ± 0.055 N). This study highlighted that insoluble dietary fiber can form oleogels via capillary suspension, which is a relatively rapid and simple strategy. Additionally, it provided a solid foundation for the comprehensive utilization of soybean processing byproducts and the transformation of traditional food-specific oils and fats.

Effect of aluminium oxide nanoparticles on long-acting oleogels laden with Sc-PLA-chitosan nanoparticles for anti-HIV therapy

The development of a long-acting injectable drug delivery systems (DDS) of active pharmaceutical ingredients (API) holds great promise in addressing the challenges of treatment adherence, predominantly in HIV/AIDS. Polymers are inevitable carriers for the preparation of DDS, which are typically composed of polylactide (PLA), carbohydrates such as chitosan or cellulose derivatives. In this study, the tenofovir alafenamide (TAF) laden PLA-stereocomplex-chitosan nanoparticles (Sc-PLA-chitosan NPs) were developed through the spray-dried technique. These NPs had a mean particle size of 91 ± 8 nm and were incorporated into oleogels consisting of sesame oil and ethyl-cellulose. To enhance the syringeability of highly viscous oleogels, the commercially available aluminium oxide NPs were added with a size of 78 nm. The proposed DDS exhibits prolonged sustained release for up to 12 days in phosphate buffer pH 7.4. Noteworthy, the oleogels with Sc-PLA-chitosan NPs displayed extended tissue permeation properties indicating their potential long-acting in-vivo drug release. Collectively, this study recommends that the development of Sc-PLA-chitosan NPs-loaded oleogels represents a certainly adaptable long-acting injectables system for the delivery of APIs in the context of HIV/AIDS. This system is expected to contribute to improved and effective treatment adherence among patients infected with HIV and provide requisite therapeutic outcomes.

Oleogel classification, physicochemical characterization methods, and typical cases of application in food: a review

The harmful effects of trans and saturated fatty acids have attracted worldwide attention. Edible oleogels, which can structure liquid oils, are promising healthy alternatives to traditional fats. Active research on oleogels is focused on the interaction between unsaturated oils with different fatty acid compositions and low molecular weight or polymer oleogels. The unique network structure inside oleogels has facilitated their application in candies, spreads, meat, and other products. However, the micro- and macro-properties, as well as the functional properties of oleogels vary by preparation method and the system composition. This review discusses the characteristics of oleogels, serving as a reference for the application of oleogels in food products. Specifically, it (i) classifies oleogels and explains the influence of gelling factors on their gelation, (ii) describes the methods for measuring the physicochemical properties of oleogels, and (iii) discusses the current applications of oleogels in food products.

On the structural and mechanical properties of mixed coconut and olive oil oleogels and bigels

The interaction of monoglycerides and phytosterols in olive- and coconut oil on the structuring of oleogels was analyzed. Specifically, bigels with gelatin hydrogel in different ratios (40:60 and 60:40 w/w) were formed. The physicochemical and microstructural attributes of these systems were assessed. The olive oil to coconut oil ratio (0-100 w/w) and the added oleogelators affected the crystal structure and the mechanical properties of the oleogels. Polarized light microscopy revealed that the addition of coconut oil created a denser triglycerides crystal network and the presence of phytosterols created more needle-like crystals, enhancing the textural properties of the oleogels and of the resulting bigels. The hardness of the oleogels ranged from 0.50 N to 1.24 N and for bigels was 5.96-36.75 N. Bigels hardness decreased as the oleogel ratio in the bigel increased. Microscopy and FTIR revealed that the addition of coconut oil in oleogels hampered the formation of a distinct crystalline monoglycerides network. Also, the absence of new peaks in the bigels indicated that the two structured phases interact with each other mostly physically, without the formation of new chemical bonds. Consequently, the oleogels and bigels developed, comprise a promising hard fat substitute with improved nutritional profile.

Chocolates, compounds and spreads: A review on the use of oleogels, hydrogels and hybrid gels to reduce saturated fat content

This study is a bibliometric analysis and literature review on the use of oleogels (OGs), hydrogels (HGs) and hybrid gels (HYGs) in chocolate, compounds and spreads with the aim of reducing the saturated fat in these products. The articles were selected by analyzing titles, keywords and abstracts in the Web of Science (WoS), Scopus and Google Scholar databases. Supplementary documents were obtained from government sources, including patent registrations. The theoretical and practical aspects were critically analyzed, highlighting the main points of agreement and disagreement between the authors. The results revealed a lack of regulations and official guidelines that widely allow the use of OGs, HGs and HYGs in chocolate confectionery products. The type and characteristics of raw materials affect the properties of products. Replacing cocoa butter (CB) with OGs, HGs or HYGs also affects texture, melting point and behavior, and nutritional aspects. These substitutions can result in products with better sensory acceptance and health benefits, such as reducing saturated fat and promoting cardiovascular health. However, it is important to find the ideal combination and proportions of components to obtain the desired properties in the final products.

Oleofoams: The impact of formulating air-in-oil systems from a lipid oxidation perspective

Air-in-oil foams, or oleofoams, have a great potential for food applications as they can at least partially replace animal or hydrogenated fats, without compromising on textural properties. Yet, there are some challenges to tackle before they can largely be implemented for real-life applications. One of those is the lack of data regarding their oxidative stability. This is an important point to consider, as although using oils rich in polyunsaturated fatty acids (PUFAs) is highly desirable from a nutritional perspective, these fatty acids are particularly prone to oxidation, which leads to major degradations of food quality. This work thus aimed to investigate the oxidative stability of oleofoams prepared with omega-3 PUFA-rich vegetable oils (rapeseed or flaxseed oil) and various types of high melting point lipid-based oleogelators (stearic acid, glyceryl monostearate and stearyl alcohol) when incubated at room temperature. The physical structure and stability of the oleofoams was monitored by various techniques (visual observations, microscopy, DSC, NMR, SAXS and WAXS). Lipid oxidation was assessed by combined measurements of primary (conjugated diene hydroperoxides) and secondary (thiobarbituric acid reactive substances - TBARS) products. We found that the oxidative stability of oleofoams was higher compared to that of the corresponding bulk oil. This protective effect was also found when the oil was simply mixed with the oleogelator without incorporation of air bubbles (i.e., forming an oleogel), and was somewhat modulated depending on the type of oleogelator. These results suggest that oleogelators and the structural changes that they induce limit the cascaded propagation of lipid oxidation in oil-continuous matrices, which is promising in the perspective of future applications.

Fabrication and Application of Turmeric Extract-Incorporated Oleogels Structured with Xanthan Gum and Soy Lecithin by Emulsion Template

Turmeric extract (TE)-loaded oleogels (TE-OG) was fabricated by an emulsion template technique using xanthan gum (XG) and soy lecithin (SL) as oleogelators. The formulation for TE-OG was optimized using 0.32% XG, 1.2% SL, and 1.0% TE. The optimized TE-OG had a minimal particle size of 810.23 ± 10.68 nm as measured by the dynamic light scattering (DLS) method, and a high encapsulation efficiency (EE) of 96.62 ± 0.56%. Additionally, the optimized TE-OG exhibited a favorable zeta potential of -27.73 ± 0.44 mV, indicating the good stability of the TE-OG due to the electrostatic repulsion between particles. TE-OG formulated with 0.32% XG and 1.2% SL was subjected to frequency sweep testing to evaluate its solid-like rheological behavior. The oil-binding capacity (OBC) of TE-OG was consistently maintained above 99.99%. In vitro digestion of TE-OG demonstrated the potential of the emulsion template for controlled release, with less than 20% of the encapsulated curcumin being released in simulated gastric fluid (SGF), whereas nearly 70% was released in the simulated intestinal fluid (SIF). Moreover, TE-OG affected the rapid release of free fatty acids (FFAs), which have a positive effect on the digestion of triacylglycerols found in soybean oil (SO). TE-OG was further used as an alternative to commercial butter to produce pound cakes, and their rheological properties were compared to those of the pound cake prepared using commercial butter. The pound cake prepared using TE-OG showed a noticeable decrease in hardness from 10.08 ± 1.39 N to 7.88 ± 0.68 N and increased porosity, demonstrating the inherent capability of TE-OG to enhance the overall quality standards of bakery products.

Elevating meat products: Unleashing novel gel techniques for enhancing lipid profiles

Rising health concerns and the diet-health link drive demand for healthier foods, prompting meat manufacturers to reformulate traditional products. These manufacturers have reduced fat content to enhance nutritional quality, which is essential for maintaining desired product features. As a result, numerous strategies have emerged over recent decades to decrease fat and enhance the lipid profiles of meat products. Among these strategies, using hydrocolloids, emulsification, encapsulation, or gelation of oils to produce fat substitutes stands out. Using gels allows fat replacers with characteristics similar to animal fat (similar rheological, physical, or appearance properties) but with a much healthier lipid profile (by incorporating highly unsaturated oils). Therefore, this manuscript aims to comprehensively describe the main fat replacers used to prepare meat products. In addition, an in-depth review of the latest studies (2022-2023) that use novel gels to reform meat products has been made, indicating in each case the implications that the reformulation produces at a physicochemical, nutritional, and sensory level. Given the reported results, it seems clear that the strategy of using bigels or emulgels is very promising and allows obtaining nutritionally highly improved meat products without affecting their sensory or physicochemical properties. However, the best conditions to obtain a novel gel suitable for use as a fat substitute for each meat product still need to be studied and correctly defined. Moreover, these advancements can pave the way for more extensive studies on using novel gel techniques in other food industries, expanding their applicability and leading to healthier consumer options across various food categories.

Characterization of chitosan-gelatin cryogel templates developed by chemical crosslinking and oxidation resistance of camellia oil cryogel-templated oleogels

In this study, chitosan-gelatin conjugates were prepared by chemical crosslinking of tannic acid. The cryogel templates were developed through freeze-drying and immersed in camellia oil to construct cryogel-templated oleogels. Chemical crosslinking resulted in apparent colour changes and improved emulsion-related/rheological properties on conjugates. The cryogel templates with different formulas exhibited different microstructures with high porosities (over 96 %), and crosslinked samples might have higher hydrogen bonding strength. Tannic acid crosslinking also led to enhanced thermal stabilities and mechanical properties. Cryogel templates could reach a considerable oil absorption capacity of up to 29.26 g/g and prevent oil from leaking effectively. The obtained oleogels with high tannic acid content possessed outstanding antioxidant abilities. After 8 days of rapid oxidation at 40 °C, Oleogels with a high degree of crosslinking owned the lowest POV and TBARS values (39.74 nmol/kg, and 24.40 μg/g, respectively). This study indicates that the involvement of chemical crosslinking would favor the preparation and the application potential of cryogel-templated oleogels, and the tannic acid in the composite biopolymer systems could act as both the crosslinking agent and the antioxidant.

Multicomponent Oleogels Prepared with High- and Low-Molecular-Weight Oleogelators: Ethylcellulose and Waxes

The combined interactions between ethylcellulose (EC) and natural waxes to structure edible oil are underexplored. To reduce the high EC concentration required to form a functional oleogel, novel oleogels were prepared using a 50% critical concentration of EC (i.e., 4%) with 1-4% beeswax (BW) and carnauba wax (CRW). One percent wax was sufficient for EC to form self-sustaining oleogel. Rheological analysis demonstrated that 4%EC + 4%BW/CRW had comparable oleogel properties to 8%EC. The yield stress and flow point of wax oleogels were enhanced upon EC addition. EC did not influence the thermal behaviour of the wax component of the oleogel, but the crystallinity and plasticity of the combined oleogel increased. The crystal shape of BW oleogel changed upon EC addition from a needle-like to spherulitic shape. Confocal laser scanning microscopy highlighted the uniform distribution of EC polymeric network and wax crystals. EC/wax mixtures have promising oil-structuring abilities that have the potential to use as solid fat substitutes.

Cultured meat platform developed through the structuring of edible microcarrier-derived microtissues with oleogel-based fat substitute

With the increasing global demand for meat, cultured meat technologies are emerging, offering more sustainable solutions that aim to evade a future shortage of meat. Here, we demonstrate a cultured meat platform composed of edible microcarriers and an oleogel-based fat substitute. Scalable expansion of bovine mesenchymal stem cells on edible chitosan-collagen microcarriers is optimized to generate cellularized microtissues. In parallel, an oleogel system incorporated with plant protein is developed as a fat substitute, which is comparable to beef fat in appearance and texture. Combining the cellularized microtissues with the developed fat substitute, two types of cultured meat prototypes are introduced: layered cultured meat and burger-like cultured meat. While the layered prototype benefits enhanced stiffness, the burger-like prototype has a marbling meat-like appearance and a softer texture. Overall, this platform and the established technological basis may contribute to the development of different cultured meat products and promote their commercial production.

Emulsion-Templated Liquid Oil Structuring with Egg White Protein Microgel- Xanthan Gum

In this study, oleogels were prepared by the emulsion-template method using egg-white protein microgel as a gelator and xanthan gum (XG) as thickener. The physicochemical properties of the emulsion and oleogels were investigated. The adsorption of protein on the surface of the oil droplet reached saturation when the protein microgel concentration reached 2%. The excess protein combined with XG and accumulated on the outer layer of the oleogel, which prevented the emulsion from flocculation, enhanced the oil-holding capacity of the oleogel, and had a positive effect on preventing the oxidation of oil. When the concentration of XG was less than 0.4%, the EWP microgel, combined with the XG, stabilized the emulsion. As the concentration of XG was greater than 0.4%, excessive XG in the emulsion improved the viscosity and mechanical properties of the emulsion to prevent the aggregation of oil droplets. However, the change in XG concentration had no significant effect on the oxidation of the oil.

Polyphenol-Enriched Protein Oleogels as Potential Delivery Systems of Omega-3 Fatty Acids

Omega-3 polyunsaturated fatty acids (n-3 FAs) are essential nutrients and are considered effective in improving human health. Recent studies highlight the importance of the combination of n-3 FAs and polyphenols for limiting the oxidation of n-3 FAs and exhibiting synergistic beneficial effects. Herein, we developed a novel formulation technology to prepare oleogels that could be used for the codelivery of n-3 FAs and polyphenols with high loading efficacy and oxidative stability. These oleogels are made from algal oil with polyphenol-enriched whey protein microgel (WPM) particles as gelling agents via simple and scalable ball milling technology. The oxidative status, fatty acid composition, and volatiles of protein oleogels during accelerated storage were systematically assessed by stoichiometry and gas chromatography-mass spectrometry. These results showed that protein oleogels could overcome several challenges associated with the formulation of n-3 oils, including long-term oxidative stability and improved sensory and textural properties. The protein oleogel system could provide an excellent convenience for formulating multiple nutrients and nutraceuticals with integrating health effects, which are expected to be used in the care of highly vulnerable populations, including children, the elderly, and patients.

Oleogels-Innovative Technological Solution for the Nutritional Improvement of Meat Products

Food products contain important quantities of fats, which include saturated and/or unsaturated fatty acids. Because of a proven relationship between saturated fat consumption and the appearance of several diseases, an actual trend is to eliminate them from foodstuffs by finding solutions for integrating other healthier fats with high stability and solid-like structure. Polyunsaturated vegetable oils are healthier for the human diet, but their liquid consistency can lead to a weak texture or oil drain if directly introduced into foods during technological processes. Lately, the use of oleogels that are obtained through the solidification of liquid oils by using edible oleogelators, showed encouraging results as fat replacers in several types of foods. In particular, for meat products, studies regarding successful oleogel integration in burgers, meat batters, pâtés, frankfurters, fermented and bologna sausages have been noted, in order to improve their nutritional profile and make them healthier by substituting for animal fats. The present review aims to summarize the newest trends regarding the use of oleogels in meat products. However, further research on the compatibility between different oil-oleogelator formulations and meat product components is needed, as it is extremely important to obtain appropriate compositions with adequate behavior under the processing conditions.

Edible oleogels based on high molecular weight oleogelators and its prospects in food applications

Food industry is actively looking for alternative ingredients to replace saturated and trans fats in foods while preserving their original organoleptic attributes to ensure consumers' acceptance. A plausible approach is the replacement of solid fats with oleogels. Oleogels can be engineered to mimic properties that are commonly played by regular solid fats but using hydrophobic liquid vegetable oil with an optimum fatty acid profile and, they can also act as carriers for lipophilic bioactive substance. Low molecular weight oleogelators (LMOGs) are well studied and reviewed. In contrast, high molecular weight oleogelators (HMOGs) e.g., polysaccharides and proteins, are not fully researched yet. This review focusses on development of HMOG oleogels produced by means of emulsion templated, direct dispersion, foam templated and solvent exchange methods that can influence the stability, physicochemical properties and their potential application in food industry. Multi-component oleogels can solve the inefficiencies in a single component oleogel and, thus, combinations of HMOGs and HMOGs & LMOGs can produce oleogels with desired properties. These new oleogels can find application as fat substitutes in food products, providing better nutritional and sensory acceptance. A comprehensive overview of recent developments in the field of HMOG and multicomponent oleogels with HMOG is deeply reviewed.

Linking intermolecular interactions and rheological behaviour in capillary suspensions

HYPOTHESIS

Capillary suspensions feature networks of particles connected by liquid bridges, which are obtained by adding a small amount of a second immiscible liquid to a suspension. It is possible to link the network formation as well as the rheological behaviour of capillary suspensions to the intermolecular interactions of their constituents.

EXPERIMENTS AND SIMULATIONS

Through a combination of experimental and numerical methods, we present a novel approach, based on Hansen solubility parameters computed from Molecular Dynamics (MD) simulations, to rationalize and predict the rheological behaviour of capillary suspensions. We investigated the formation of capillary suspensions for various combinations of bulk and secondary liquids mixed with hydrophilic silica particles. The predictions were confirmed experimentally by rheological analysis, interfacial tension measurements and microscopy (CLSM) imaging.

FINDINGS

Numerical and experimental results show that the Hansen solubility parameters theory allows to predict the formation of capillary suspensions, whose strength exponentially decays with decreasing intermolecular interactions between the secondary liquids and the dispersed particles. High immiscibility between the bulk and secondary liquid strengthens the gel up to a critical immiscibility point, above which the strength of the gel remains mostly affected by the affinity between the secondary liquids and the dispersed particles. Furthermore, we find that hydrogen-bonding and polar interactions control the formation of capillary suspensions. This simple approach can guide the selection of adequate solvents and immiscible secondary liquids, allowing an easy formulation of new particulate-based gels.

Effect of water content on the physical properties and structure of walnut oleogels

This study aimed to investigate the effect of water content on the properties and structure of oleogels by developing walnut oleogel based on potato starch and candelilla wax (CW). Physical, thermal, rheological and microstructure characteristics of the walnut oleogel were determined by texture analyzer, differential scanning calorimeter, rotary rheometer, X-ray diffractometer and optical microscope. Results showed that with increased water content, the hardness of the oleogel increased from 123.35 g to 158 g, whereas the oil loss rate decreased from 24.64% to 10.91%. However, these two values decreased slightly when the ratio of oil to water was 1 : 1. The prepared oleogels have a high elastic modulus, and the flow behavior of all walnut oleogels conformed to that of a non-flowing fluid. Microstructure observation indicated that the crystal size and quantity increased with an increase in water content, and the liquid oil was wrapped in the crystal network by CW and potato starch, forming solidified droplets to further promote gelation. In conclusion, when the ratio of oil to water is 39%, the oleogel has good physical properties and stable crystal structure. These findings can provide an indication of water content in the composition of oleogels.

Oleogels prepared with low molecular weight gelators: Texture, rheology and sensory properties, a review

There is a growing need for healthier foods with no trans and reduced saturated fat. However, solid fats play critical roles in texture and sensory attributes of food products, making it challenging to eliminate them in foods. Recently, the concept of oleogelation as a novel oil structuring technique has received numerous attentions owing to their great potential to mimic the properties of solid fats. Understanding textural, rheological and sensory properties of oleogels helps predict the techno-functionalities of oleogels to replace solid fats in food products. This research critically reviews the textural and rheological properties of oleogels prepared by low molecular weight oleogelators (LMWGs) and functional characteristics of foods formulated by these oleogels. The mechanical properties of LMWG-containing oleogels are comprehensively discussed against conventional solid fats. The interactions between the oleogel and its surrounding food matrix are explained, and the sensory attributes of oleogel containing reformulated products are highlighted. Scientific insights into the texture and rheological properties of oleogels manufactured with a wide range of low molecular gelators and their related products are provided in order to boost their implication for creating healthier foods with high consumer acceptability. Future research opportunities on low molecular weight gelators are also discussed.

Natural Gums as Oleogelators

The natural gums used as high molecular weight oleogelators are mainly polysaccharides that deliver a broad spectrum of possible utilization methods when structuring liquid fats to solid forms. The review discusses a natural gums’ structuring and gelling behavior to capture the oil droplets and form the water/oil gelling emulsions basing on their structural conformation, internal charge, and polymeric characteristics. The specific parameters and characteristics of natural gums based oleogels are also discussed. In the future, oleogels may eliminate saturated and trans fats from food products and allow the production of low-fat products, thus reducing the environmental damage caused by the excessive use of palm oil. The increasing knowledge of molecular interaction in polysaccharide chains of natural gums allows to apply more sustainable and wiser strategies towards product formulation. Innovative solutions for using oleogels based on natural polysaccharide biopolymers let incorporate them into the food matrix and replace fats completely or create blends containing the source of fats and the addition of the oleogel. The profound insight into molecular characteristics of natural gums in the function of being oleogelators is presented.

Conversion of Whey Protein Aerogel Particles into Oleogels: Effect of Oil Type on Structural Features

Protein aerogel particles prepared by supercritical-CO₂-drying (SCD) of ground whey protein (WP) hydrogels (20% w/w, pH 5.7) were converted into oleogels by dispersion in selected edible oils (castor, cod liver, corn, flaxseed, MCT, peanut and sunflower oil). The obtained oleogels were analysed for oil content, microstructure, rheological properties, and ATR-FTIR spectra. Except for castor oil, solid-like, plastic materials with comparable composition (80% oil, 20% WP) and rheological properties (G′~3.5 × 10⁵ Pa, G″~0.20 × 10⁵ Pa, critical stress~800 Pa, tanδ~0.060) were obtained. Optical and confocal microscopy showed that the generated structure was associated with the capillary-driven absorption of oil into the porous aerogel particles interconnected via particle-particle interactions. In this structure, the oil was stably entrapped. Results evidenced the reduced role of edible oil characteristics with the exception of castor oil, whose high polarity probably favoured particle–oil interactions hindering particle networking. This work demonstrates that WP aerogels could be regarded as versatile oleogel templates allowing the structuring of many edible oils into solid-like materials.

Ultrasound-assisted gelation of β-carotene enriched oleogels based on candelilla wax-nut oils: Physical properties and in-vitro digestion analysis

•

Candelilla wax mix with peanut, pine nut and walnut oils can form oleogels.

•

Ultrasound increased G’, G’’, firmness and oil-binding capacity of oleogels.

•

Ultrasound treatment improved the protection of β-carotene in oleogels.

•

Ultrasound reduced the amount of β-carotene released during intestinal digestion.

This study investigated the effects of high-intensity ultrasound (HIU, 95 W, 10 s) on the physical properties, stability and in vitro digestion of β-carotene enriched oleogels. Candelilla wax (3 wt%) and nut oils (peanut, pine nut and walnut oil) with or without β-carotene were used to form oleogels. HIU improved the storage modules (G’) of peanut, pine nut and walnut oleogels without β-carotene from 11048.43 ± 728.85 Pa, 38111.67 ± 11663.98 Pa and 21921.13 ± 1011.55 Pa to 13502.40 ± 646.54 Pa, 75322.47 ± 9715.25 Pa and 48480.97 ± 4109.64 Pa, respectively. Moreover, HIU reduced oil loss of peanut, pine nut and walnut oleogels without β-carotene from 23.98 ± 2.58%, 17.14 ± 0.69% and 24.66 ± 1.57% to 17.60 ± 1.10%, 13.84 ± 0.74% and 18.72 ± 3.47%, respectively. X-ray diffraction patterns showed that HIU did not change the form of the crystal (β-polymorphic and β’-polymorphic) but increased the crystal intensity. Polarized light microscope images indicated that all oleogels showed more visible crystals after HIU. After 120 d of storage, HIU decreased the degradation of β-carotene for peanut oil and walnut oil samples (the contents of β-carotene in peanut and walnut oleogels without HIU after 120 d of storage were 897 ± 2 μg/g and 780 ± 1 μg/g, respectively, and those of sonicated samples were 1070 ± 4 μg/g and 932 ± 1 μg/g, respectively). Furthermore, HIU reduced the release of β-carotene in intestinal digestion. In conclusion, HIU could improve the functional properties of wax-nut oils oleogels and their β-carotene enriched oleogels.

Canola protein thermal denaturation improved emulsion-templated oleogelation and its cake-baking application

The stability and viscoelasticity of an oil-in-water emulsion formed with canola proteins could be significantly improved by heat-induced protein thermal denaturation followed by aggregation at the oil droplet surface. This phenomenon was used to develop emulsion-templated oleogels with improved rheology and used in cake baking. Canola oil (50 wt%)-in-water emulsions stabilized by 1 and 4 wt% canola protein isolates (CPI), prepared by high-pressure homogenization, were dried at 60 °C in a vacuum oven followed by shearing to create the oleogels. Before drying, the emulsions were heated (90 °C for 30 min) to induce protein denaturation. The oleogel from 4 wt% CPI heated emulsions (HE) exhibited the lowest oil loss, highest gel strength, firmness and stickiness compared to all other oleogels. Cake batter prepared with shortening showed the lowest specific gravity, highest viscosity and storage modulus compared to CPI oleogels. Confocal micrographs of shortening cake batters showed smaller air bubbles entrapped in the continuous fat phase. In comparison, the oleogel cake batters showed dispersion of larger air bubbles, oil droplets, and protein aggregates. The oleogel cake showed a darker colour compared to the shortening cake due to the dark colour of CPI. Interestingly, oleogel cakes showed lower hardness, higher cohesiveness and springiness than the shortening cake, which was attributed to the higher cake volume of the former due to the formation of larger air channels stabilized by canola proteins. In conclusion, CPI stabilized emulsion-templated oleogels could be used as a potential shortening replacer in cake and other baking applications.

The stability and viscoelasticity of an oil-in-water emulsion formed with canola proteins could be significantly improved by heat-induced protein thermal denaturation followed by aggregation at the oil droplet surface.

Oleogel-Based Systems for the Delivery of Bioactive Compounds in Foods

Oleogels are semi-solid materials containing a large fraction of liquid oil entrapped in a network of structuring molecules. In the food industry, these formulations can be used to mimic fats and to deliver bioactive compounds. In the last decade, there has been increasing interest in these structures, not only from a scientific point of view, i.e., studying new molecules, methodologies for gelification, and new structures, but also from a technological point of view, with researchers and companies exploring these structures as a way to overcome certain challenges and/or create new and innovative products. One of the exciting applications of oleogels is the delivery of functional molecules, where the incorporation of oil-soluble functional compounds can be explored not only at the macroscale but also at micro- and nanoscales, resulting in different release behaviors and also different applications. This review presents and discusses the most recent works on the development, production, characterization, and applications of oleogels and other oleogel-based systems to deliver functional molecules in foods.

Application of Analytical Methods for the Comprehensive Analysis of Oleogels-A Review

Numerous empirical studies have already been conducted on the innovative fat-replacing system defined as oleogel, creating a real urge for setting up a framework for future research, rather than conducting studies with arbitrary methods. This study re-evaluates the utility of some analyses and states some conclusions in order to eliminate the reluctance of food processors and consumers towards the utilization of oleogels as ingredients. The review presents extensively the methods applied for the characterization of various oleogels, while highlighting their addressability or inconveniences. The discussed methods were documented from the research published in the last five years. A classification of the methods is proposed based on their aims or the utility of the results, which either describe the nano-structure and the network formation, the quality of the resulting oleogel or its suitability as food ingredient or other edible purposes. The general conclusions drawn for some classes of oleogels were also revisited, in order to ease the understanding of the oleogel behaviour, to encourage innovative research approaches and to stimulate the progress in the state of art of knowledge.

Oleogels-Their Applicability and Methods of Characterization

Oleogels or, more precisely, non-triglyceride structured lipid phases have been researched excessively in the last decade. Yet, no comprehensive knowledge base has emerged, allowing technology elevation from the laboratory bench into the industrial food application. That is partly due to insufficient characterization of the structuring systems studied. Examining a single composition decided upon by arbitrary methods does not stimulate progress in the research and technology area. A framework that gives much better guidance to product applications can easily be derived. For example, the incremental structure contribution concept is advocated as a parameter to compare the potency of structuring systems. These can straightforwardly be determined by combining solubility data and structural measurements in the recommended manner. The current method to determine the oil-binding capacity suffers from reproducibility and relevance. A newly developed method is suggested to overcome these shortcomings. The recommended new characterization of oleogels should contribute to a more comprehensive knowledge base necessary for product innovations.

Amelioration of the stability of polyunsaturated fatty acids and bioactive enriched vegetable oil: blending, encapsulation, and its application

Lipid oxidation in vegetable oils is the primary concern for food technologists. Modification of oils like hydrogenation, fractionation, inter-esterification, and blending are followed to improve nutritional quality. Blending non-conventional/conventional vegetable oils to obtain a synergistic oil mixture is commonly practiced in the food industry to enhance the nutritional characteristics and stability of oil at an affordable price. Microencapsulation of these oils provides a functional barrier of core and coating material from the adverse environmental conditions, thereby enhancing the oxidative stability, thermo-stability, shelf-life, and biological activity of oils. Microencapsulation of oils has been conducted and commercialized by employing different conventional methods including emulsification, spray-drying, freeze-drying, coacervation, and melt-extrusion compared with new, improved methods like microwave drying, spray chilling, and co-extrusion. The microencapsulated oil emulsion can be either dried to easy-to-handle solids/microcapsules, converted into soft solids, or enclosed in a gel-like matrix, increasing the shelf-life of the liquid oil. The omega-rich microcapsules have a wide application in confectionery, dairy, ice-cream, and pharmaceutical industries. This review summarizes recent developments in blending and microencapsulation technologies in improving the stability and nutritional value of edible oils.

Study of monoglycerides enriched with unsaturated fatty acids at sn-2 position as oleogelators for oleogel preparation

The effect of using highly unsaturated 2-monoglycerides as oleogelators on the properties of soybean oil oleogels designed to eliminate saturated and trans fatty acids was investigated in this study. We adopted a novel two-step synthesis aiming to increase the yield of the 2-monoglycerides. The optimal synthesis conditions were a substrate weight ratio of 2:1 (w/w), 10% Lipozyme 435 (w/w total reactants), and 4 h of reaction time at room temperature. Under these conditions, the 2-monoglyceride yield (40.69%) increased by 10% compared to that of the conventional synthesis route. Additionally, soybean oil oleogels prepared using 10% 2-monoglycerides with or without rice bran wax were systematically characterized by polarized light microscopy, a texture analyzer, XRD spectroscopy, and rheometry. Comparative studies indicated that a combination of rice bran wax and 2-monoglycerides had synergistic effects on gel properties. A mixture of 4% rice bran wax and 6% 2-monoglycerides was found to provide better oleogels.

Preparation of Protein Oleogels: Effect on Structure and Functionality

Among available structuring agents that have been used to provide solid properties to liquid oils, protein is a more recent candidate. Due to their nutritional value and high consumer acceptance, proteins are of special interest for the preparation of edible oleogels as an alternative for solid fats. Whereas the field of protein oleogelation is still rather new and just starts unfolding, several preparation methods have been demonstrated to be suitable for protein oleogel preparation. However, there is limited knowledge regarding the link between microstructural properties of the gels and macroscopic rheological properties, and the potential of such protein-based oleogels as a fat replacer in food products. In this review, we therefore provide an overview of various protein oleogel preparation methods and the resulting gel microstructures. Based on the different structures, we discuss how the rheological properties can be modified for the different types of protein oleogels. Finally, we consider the suitability of the different preparation methods regarding potential applications on industrial scale, and provide a short summary of the current state of knowledge regarding the behavior of protein oleogels as a fat replacer in food products.

Self-assembled lipids for food applications: A review

Lipids play an important role in human nutrition. Several foodstuffs can be manufactured from the simple, compound and derived lipids. In particular, the use of self-assembled lipids (SLs, e.g. self-assembled L-α-lecithin) has brought great attention for the development of tailored, tuned and targeted colloidal structures loading degradation-sensitive substances with valuable antimicrobial, antioxidant and nutraceutical properties for food applications. For example, polyunsaturated fatty acids (PUFAs) and essential oils can be protected from degradation, thus improving their bioavailability in general terms in consumers. From a nanotechnological point of view, SLs allow the development of advanced and multifaceted architectures, in which each molecule of them are used as building blocks to obtain designed and ordered structures. It is important to note before beginning this review, that simple and compound lipids are the main SLs, while essential fatty acids and derived lipids in general have been considered by many research groups as the bulk loaded substances within several structures from self-assembled carbohydrates, proteins and lipids. However, this review paper is addressed on the analysis of the lipid-lipid self-assembly. Lipids can be self-assembled into various structures (micelles, vesicular systems, lyotropic liquid crystals, oleogels and films) to be used in different food applications: coatings, controlled and sustained release materials, emulsions, functional foods, etc. SLs can be obtained via non-covalent chemical interactions, primarily by hydrogen, hydrophilic and ionic bonding, which are influenced by the conditions of ionic strength, pH, temperature, among others. This manuscript aims to give an analysis of the specific state-of-the-art of SLs for food applications, based primarily on the literature reported in the past five years.

Rheological properties of ethyl cellulose-monoglyceride-candelilla wax oleogel vis-a-vis edible shortenings

The gelation process, elasticity, and mechanical recovery after shear were studied in mixed oleogels of ethylcellulose (EC), monoglycerides (MG), and candelilla wax (CW). EC oleogels produced without MG showed grainy texture due to incomplete dissolution of crystalline fractions of raw EC in the vegetable oil (150 °C). These fractions were eliminated by dissolving the raw EC/MG mixture in ethanol, evaporating the solvent, dispersing, and dissolving the solid residue in the vegetable oil (150 °C) prior gelation. The EC polymeric network, and MG, and CW crystals had a positive interaction on the elasticity of mixed oleogels. Mixed oleogels produced under static conditions showed a 100 % of elasticity recovery after shearing, a phenomenon associated with an EC interchain hydrogen bonding mediated by hydroxyl groups of MGs. This tentatively resulted from the formation of junction zones of the type EC-[MG]_n-EC. The rheological behavior of these olegels was remarkably close to that of commercial shortenings.

The thermal, rheological, and structural characterization of grapeseed oil oleogels structured with binary blends of oleogelator

Combination of oleogelators has recently started to receive scientific attention since single oleogelator may not adequately compensate for the diverse roles of solid fat in a complicated food system. In this study, grapeseed oil oleogels were prepared with candelilla wax (CDW) and glyceryl monostearate (GMS) blends at varying mass ratios (100:0, 75:25, 50:50, 25:75, and 0:100 [w/w]), and their physicochemical characteristics were characterized in terms of thermal, rheological, and microstructural properties. The oleogel with CDW and GMS at a blending ratio of 75 and 25 (CDW-75:GMS-25) exhibited the lowest melting point, implying a eutectic behavior. The CDW-75:GMS-25 oleogel also had a harder texture, greater viscoelasticity, and lower oiling-off characteristics that were highly attributed to its small crystals and dense structural network observed from phase-contrast microscopic images. When GMS from different vendors were examined for melting behavior and hardness of oleogels, it was found that the oleogel properties were highly dependent on the detailed composition of GMS. NMR study showed that the ternary system of CDW, glyceryl 1-monostearate, and glyceryl 1,3-distearate was responsible for the eutectic behavior of the CDW-75:GMS-25 oleogel. This study reports the unique and improved melting and physical properties of oleogels with the mixture of CDW and GMS, which can increase the feasibility of the oleogel technology in actual food products. However, caution should be taken in selecting the oleogelators because their detailed composition and properties can vary depending on sources and processing conditions. PRACTICAL APPLICATION: Increasing attention has been paid to the combination of oleogelators since single oleogelator may not adequately compensate for the diverse roles of solid fat in a complicated food system. This study showed new eutectic characteristics at a specific blending ratio of candelilla wax and glyceryl monostearate that could be positively correlated with the increased hardness, viscoelasticity, and oiling-off features. The results may encourage the food industry to utilize this binary oleogelator blend as an alternative to solid fat high in saturated fat by providing new functional properties.