Failure pressures and drag reduction benefits of superhydrophobic wire screens

Recent Advances in Multifunctional Mechanical–Chemical Superhydrophobic Materials

In recent years, biology-inspired superhydrophobic technology has attracted extensive attention and has been widely used in self-cleaning, anti-icing, oil–water separation, and other fields. However, the poor durability restricts its application in practice; thus, it is urgent to systematically summarize it so that scientists can guide the future development of this field. Here, in this review, we first elucidated five kinds of typical superhydrophobic models, namely, Young’s equation, Wenzel, Cassie–Baxter, Wenzel–Cassie, “Lotus,” and “Gecko” models. Then, we summarized the improvement in mechanical stability and chemical stability of superhydrophobic surface. Later, the durability test methods such as mechanical test methods and chemical test methods are discussed. Afterwards, we displayed the applications of multifunctional mechanical–chemical superhydrophobic materials, namely, anti-fogging, self-cleaning, oil–water separation, antibacterial, membrane distillation, battery, and anti-icing. Finally, the outlook and challenge of mechanical–chemical superhydrophobic materials are highlighted.

Jet Impact on Superhydrophobic Metal Mesh

Liquid-jet impact on porous, relatively thin solids has a variety of applications in heat transfer, filtration, liquid-fuel atomization, incontinence products, and solid-substrate erosion, among others. Many prior studies focused on liquid-jet impact on impermeable substrates, and some have investigated the hydraulic jump phenomenon. In the present work, the liquid jet strikes a superhydrophobic, permeable, metal mesh orthogonally, and the radial spreading and throughflow of the liquid are characterized. The prebreakthrough hydraulic jump, the breakthrough velocity, and the postbreakthrough spatial distributions of the liquid are investigated by varying the liquid properties (density, surface tension, and viscosity) and the openness of the metal mesh. The hydraulic jump radius in the prebreakthrough regime increases with jet velocity and is independent of the liquid properties and mesh geometry (pore size, wire diameter and pitch). The breakthrough velocity increases with surface tension of the liquid and decreases with the mesh opening diameter and liquid viscosity. A simple analytical model predicts the jet breakthrough velocity; its predictions are in accordance with the experimental observations. In the postbreakthrough regime, as the jet velocity increases, the liquid flow rate penetrating the mesh shows an initially steep increase, followed by a plateau, which is attributed to a Cassie-Baxter-to-Wenzel transition at the impact area of the mesh.

A facile, fast, and low-cost method for fabrication of micro/nano-textured superhydrophobic surfaces

HYPOTHESIS

Alkyl ketene dimer (AKD) is frequently used in paper industry as an inexpensive sizing agent. The formation of a porous structure after curing the solidified AKD for an extra-long time (4-6 days) results in superhydrophobicity. In this study, a facile and low-cost method was utilized to turn the surface of AKD superhydrophobic in a very short period of time.

EXPERIMENTS

We fabricated superhydrophobic coatings by dipping glass and paper substrates in molten AKD and then treating them with ethanol after solidification. The samples were characterized by X-ray diffraction, Scanning electron microscopy, Fourier transform-infrared spectroscopy, X-ray photoelectron spectroscopy, Confocal laser scanning microscopy, and dynamic contact angle goniometry.

FINDINGS

The results show that briefly treating the coatings, obtained from isothermally heated AKD melt at 40 °C for 3 min, with ethanol leads to superhydrophobicity with advancing and receding contact angles of 158.7 ± 1.4° and 156.8 ± 0.9°, respectively. By increasing the melt temperature to 70 °C and its heating time to 6 h followed by ethanol treatment, the advancing and receding contact angles increased to 163.7 ± 1.3° and 162.6 ± 1.2°, respectively. This enhancement in superhydrophobicity is due to the formation of porous, entangled irregular micro/nano textures that create air cushions on the surface resulting in droplet state transition from Wenzel to Cassie.