Enhanced marine antifouling performance of silver-titania nanotube composites from hydrothermal processing

Detailed Insight into Photocatalytic Inactivation of Pathogenic Bacteria in the Presence of Visible-Light-Active Multicomponent Photocatalysts

The use of heterogeneous photocatalysis in biologically contaminated water purification processes still requires the development of materials active in visible light, preferably in the form of thin films. Herein, we report nanotube structures made of TiO2/Ag2O/Au0, TiO2/Ag2O/PtOx, TiO2/Cu2O/Au0, and TiO2/Cu2O/PtOx obtained via one-step anodic oxidation of the titanium-based alloys (Ti94Ag5Au1, Ti94Cu5Pt1, Ti94Cu5Au1, and Ti94Ag5Pt1) possessing high visible light activity in the inactivation process of methicillin-susceptible S. aureus and other pathogenic bacteria-E. coli, Clostridium sp., and K. oxytoca. In the samples made from Ti-based alloys, metal/metal oxide nanoparticles were formed, which were located on the surface and inside the walls of the NTs. The obtained results showed that oxygen species produced at the surface of irradiated photocatalysts and the presence of copper and silver species in the photoactive layers both contributed to the inactivation of bacteria. Photocatalytic inactivation of E. coli, S. aureus, and Clostridium sp. was confirmed via TEM imaging of bacterium cell destruction and the detection of CO2 as a result of bacteria cell mineralization for the most active sample. These results suggest that the membrane ruptures as a result of the attack of active oxygen species, and then, both the membrane and the contents are mineralized to CO2.

Nanocoating Is a New Way for Biofouling Prevention

Biofouling is a major concern to the maritime industry. Biofouling increases fuel consumption, accelerates corrosion, clogs membranes and pipes, and reduces the buoyancy of marine installations, such as ships, platforms, and nets. While traditionally marine installations are protected by toxic biocidal coatings, due to recent environmental concerns and legislation, novel nanomaterial-based anti-fouling coatings are being developed. Hybrid nanocomposites of organic-inorganic materials give a possibility to combine the characteristics of both groups of material generating opportunities to prevent biofouling. The development of bio-inspired surface designs, progress in polymer science and advances in nanotechnology is significantly contributing to the development of eco-friendly marine coatings containing photocatalytic nanomaterials. The review mainly discusses photocatalysis, antifouling activity, and formulation of coatings using metal and metal oxide nanomaterials (nanoparticles, nanowires, nanorods). Additionally, applications of nanocomposite coatings for inhibition of micro- and macro-fouling in marine environments are reviewed.

Development of Marine Antifouling Epoxy Coating Enhanced with Clay Nanotubes

An antifouling epoxy resin doped with natural clay nanotubes that are loaded with biocide or silver allowed extended protection against the proliferation of marine microorganisms. Compared to the 2–3 months of protection with antifoulant dichlorooctylisothiazolone (DCOIT) directly admixed into epoxy resin, the DCOIT release time of the halloysite formulations was extended to 12 months by incorporating biocide-loaded nanoclay in the polymer matrix. The protective properties of the epoxy-halloysite nanocomposites showed much less adhesion and proliferation of marine bacteria Vibrio natriegens on the resin surface after a two-month exposure to seawater than the coating formulations directly doped with non-encapsulated DCOIT. The coating formulation protection efficiency was further confirmed by twelve-month shallow field tests in the South China Sea. Replacing 2 wt.% biocide in the traditional formula with DCOIT-loaded natural environmentally friendly halloysite clay drastically improved the antifouling properties of the epoxy coating, promising scalable applications in protective marine coating. The antifouling property of epoxy resin was enhanced with silver particles synthesized on halloysite nanotubes. A natural mixture of MnO particles and halloysite could also be used as a nonbiocide additive to marine coating. The short-term White Sea water test of epoxy coating with 5% of Ag-halloysite composite of MnO-halloysite natural mixture showed no visible fouling.

Preparation of AgCl/TNTs nanocomposites for organic dyes and inorganic heavy metal removal

In this study, TiO₂ nanotubes (TNTs) and AgCl-modified TNTs nanocomposites with multiple crystal phases were synthesized through a hydrothermal method without calcination. The resultant samples had a large Brunauer-Emmett-Teller surface area. Additionally, the Ag modification process reduced the recombination rate of electron-hole pairs in the synthesized sample and possessed more oxygen vacancy sites. The surface area of the AgCl-modified TNTs was smaller than that of non-modified TNTs sample; however, the nanocomposites exhibited outstanding photocatalytic performance and adsorption properties. AgCl compounds present on the TNTs surface effectively interacted with Hg⁰, improving the dye photodegradation efficiency. The Hg⁰ removal efficiencies of the TNTs and AgCl-modified TNTs samples were about 63% and 86%, respectively. The crystal violet (CV) and malachite green (MG) removal efficiencies of the AgCl-modified TNTs sample were around 57% and 72%, respectively. Both dyes photodecomposition efficiencies for AgCl-modified TNTs sample are higher than those of TNTs sample. The oxygen vacancy on the AgCl-modified TNTs surface was determined to be advantageous for OH^- and arsenate adsorption through ligand exchange. The maximum adsorption quantity of As⁵⁺ calculated by Langmuir equation was 15.38 mg g^-1 (TNTs) and 21.10 mg g^-1 (AgCl-modified TNTs).

Influence of Preparation Procedure on Physicochemical and Antibacterial Properties of Titanate Nanotubes Modified with Silver

Silver nanoparticles (NPs) are effective antibacterial agents; however, aggregation of NPs and uncontrolled release of Ag⁺ affect their efficiency and may pose a risk to the environment. To overcome these disadvantages, immobilization of Ag onto titanate nanotubes (TNTs) was investigated. This paper describes the physicochemical and antibacterial properties of silver incorporated titanate nanotubes (Ag/TNTs) prepared using five procedures and containing different Ag amounts (0.11-30.85 wt.%). The methods were (i) sol-gel followed by a hydrothermal process; (ii) photodeposition under ambient conditions; (iii) photodeposition under an inert atmosphere; (iv) NaBH₄ reduction; and (v) electroless deposition after activation of TNTs with Sn²⁺. Depending on the synthesis procedure, the presence of metallic Ag NPs, AgO or AgCl was observed. The electroless method led to an additional deposition of SnO₂ NPs. The antibacterial properties of Ag/TNTs were analyzed as a function of Ag content and released against Escherichia coli and Staphylococcus epidermidis. The best bactericidal properties exhibited Ag/TNTs prepared through the photodeposition process due to the higher interaction of exposed Ag NPs with bacteria. An increase of Ag loading resulted in improvement of antibacterial activity of Ag/TNTs although no direct correlation between silver content or release and inhibition of bacterial growth was found.

Investigation of the Compressibility and Compactibility of Titanate Nanotube-API Composites

The present work aims to reveal the pharma-industrial benefits of the use of hydrothermally synthesised titanate nanotube (TNT) carriers in the manufacturing of nano-sized active pharmaceutical ingredients (APIs). Based on this purpose, the compressibility and compactibility of various APIs (diltiazem hydrochloride, diclofenac sodium, atenolol and hydrochlorothiazide) and their 1:1 composites formed with TNTs were investigated in a comparative study, using a Lloyd 6000R uniaxial press instrumented with a force gauge and a linear variable differential transformer extensometer. The tablet compression was performed without the use of any excipients, thus providing the precise energetic characterisation of the materials’ behaviour under pressure. In addition to the powder functionality test, the post-compressional properties of the tablets were also determined and evaluated. The results of the energetic analysis demonstrated that the use of TNTs as drug carriers is beneficial in every step of the tabletting process: besides providing better flowability and more favourable particle rearrangement, it highly decreases the elastic recovery of the APIs and results in ideal plastic deformation. Moreover, the post-compressional properties of the TNT–API composites were found to be exceptional (e.g., great tablet hardness and tensile strength), affirming the above results and proving the potential in the use of TNT carriers for drug manufacturing.

Synergistic effects of titania nanotubes and silicon to enhance the osteogenic activity

In this study, titania nanotubes (TNTs) incorporating silicon (Si) were formed on Ti disks using anodization and electron beam evaporation (EBE) technology to improve the osteogenic activity. The amount of Si was exquisitely adjusted by controlling the duration of EBE to optimize the biofunctionality. As the Si was incorporated, the samples exhibited hydrophilic surfaces. Long lasting and controllable Si release was observed from the EBE-modified samples without cytotoxicity. Moreover, initial cell adhesion, spreading, proliferation and osteogenic differentiation of MC3T3-E1 cells were evaluated. The results showed a notable enhancement of spreading, osteogenesis and differentiation of cells on silicon-coated TNTs (Si-TNTs). In particular, samples with highest amount of silicon (∼5.93% Si) displayed greatest augmentation of ALP activity, osteogenic-related gene expression and mineralization compared to the others in the present study. It was indicated that the modification with TNTs and appropriated Si content resulted in enhanced osteoblastic spreading, proliferation and differentiation, and therefore has the potential for future applications in the field of orthopedics.