Microfluidic-assisted nanoprecipitation of antiviral-loaded polymeric nanoparticles

Microfluidic-assisted preparation of PLGA nanoparticles loaded with insulin: a comparison with double emulsion solvent evaporation method

Poly lactic-co-glycolic acid (PLGA) is an ideal polymer for the delivery of small and macromolecule drugs. Conventional preparation methods of PLGA nanoparticles (NPs) result in poor control over NPs properties. In this research, a microfluidic mixer was designed to produce insulin-loaded PLGA NPs with tuned properties. Importantly; aggregation of the NPs through the mixer was diminished due to the coaxial mixing of the precursors. The micromixer allowed for the production of NPs with small size and narrow size distribution compared to the double emulsion solvent evaporation (DESE) method. Furthermore, encapsulation efficiency and loading capacity indicated a significant increase in optimized NPs produced through the microfluidic method in comparison to DESE method. NPs prepared by the microfluidic method were able to achieve a more reduction of trans-epithelial electrical resistance values in the Caco-2 cells compared to those developed by the DESE technique that leads to greater paracellular permeation. Compatibility and interaction between components were evaluated by differential scanning calorimetry and fourier transform infrared analysis. Also, the effect of NPs on cell toxicity was investigated using MTT test. Numerical simulations were conducted to analyze the effect of mixing patterns on the properties of the NPs. It was revealed that by decreasing flow rate ratio, i.e. flow rate of the organic phase to the flow rate of the aqueous phase, mixing of the two streams increases. As an alternative to the DESE method, high flexibility in modulating hydrodynamic conditions of the microfluidic mixer allowed for nanoassembly of NPs with superior insulin encapsulation at smaller particle sizes.

Microfluidic-Assisted Formulation of ε-Polycaprolactone Nanoparticles and Evaluation of Their Properties and In Vitro Cell Uptake

The nanoprecipitation method was used to formulate ε-polycaprolactone (PCL) into fluorescent nanoparticles. Two methods of mixing the phases were evaluated: introducing the organic phase into the aqueous phase dropwise and via a specially designed microfluidic device. As a result of the nanoprecipitation process, fluorescein-loaded nanoparticles (NPs) with a mean diameter of 127 ± 3 nm and polydispersity index (PDI) of 0.180 ± 0.009 were obtained. The profiles of dye release were determined in vitro using dialysis membrane tubing, and the results showed a controlled release of the dye from NPs. In addition, the cytotoxicity of the NPs was assessed using an MTT assay. The PCL NPs were shown to be safe and non-toxic to L929 and MG63 cells. The results of the present study have revealed that PCL NPs represent a promising system for developing new drug delivery systems.

Artificial neural network modelling hydrodenticity for optimal design by microfluidics of polymer nanoparticles to apply in magnetic resonance imaging

The engineering of nanoparticles impacts the control of their nano-bio interactions at each level of the delivery pathway. Therefore, optimal nanoparticle physicochemical properties should be identified to favour on-target interactions and deliver efficiently active compounds to a specific target. To date, traditional batch processes do not guarantee the reproducibility of results and low polydispersity index of the nanostructures, while microfluidics has emerged as cost effectiveness, short-production time approach to control the nanoparticle size and size distribution. Several thermodynamic processes have been implemented in microfluidics, such as nanoprecipitation, ionotropic gelation, self-assembly, etc., to produce nanoparticles in a continuous mode and high throughput way.   In this work, we show how the Artificial Neural Network (ANN) can be adopted to model the impact of microfluidic parameters (namely, flow rates and polymer concentrations) on the size of the nanoparticles. Promising results have been obtained, with the highest model accuracy reaching 98.9 %, thus confirming the proposed approach's potential applicability for an ANN-guided biopolymer nanoparticle design for biomedical applications. Nanostructures with different degrees of complexity are analysed, and a proof-of-concept machine learning approach is proposed to evaluate Hydrodenticity in biopolymer matrices. STATEMENT OF SIGNIFICANCE: Size, shape and surface charge determine nano-bio interactions of nanoparticles and their ability to target diseases. The ideal nanoparticle design avoids off-target interactions and favours on-target interactions. So, tools enabling the identification of the optimal nanoparticle physicochemical properties for delivery to a specific target are required. In this work, we evaluate the use of Artificial Neural Network (ANN) to analyse the role of microfluidic parameters in predicting the optimal size of the different hydrogel nanoparticles and their ability to trigger Hydrodenticity.

Microfluidic Manufacture of Lipid-Based Nanomedicines

Nanoparticulate technologies have revolutionized drug delivery allowing for passive and active targeting, altered biodistribution, controlled drug release (temporospatial or triggered), enhanced stability, improved solubilization capacity, and a reduction in dose and adverse effects. However, their manufacture remains immature, and challenges exist on an industrial scale due to high batch-to-batch variability hindering their clinical translation. Lipid-based nanomedicines remain the most widely approved nanomedicines, and their current manufacturing methods remain discontinuous and face several problems such as high batch-to-batch variability affecting the critical quality attributes (CQAs) of the product, laborious multistep processes, need for an expert workforce, and not being easily amenable to industrial scale-up involving typically a complex process control. Several techniques have emerged in recent years for nanomedicine manufacture, but a paradigm shift occurred when microfluidic strategies able to mix fluids in channels with dimensions of tens of micrometers and small volumes of liquid reagents in a highly controlled manner to form nanoparticles with tunable and reproducible structure were employed. In this review, we summarize the recent advancements in the manufacturing of lipid-based nanomedicines using microfluidics with particular emphasis on the parameters that govern the control of CQAs of final nanomedicines. The impact of microfluidic environments on formation dynamics of nanomaterials, and the application of microdevices as platforms for nanomaterial screening are also discussed.

A novel approach to control Botrytis cinerea fungal infections: uptake and biological activity of antifungals encapsulated in nanoparticle based vectors

Botrytis cinerea, responsible for grey mold diseases, is a pathogen with a broad host range, affecting many important agricultural crops, in pre and post harvesting of fruits and vegetables. Commercial fungicides used to control this pathogen are often subjected to photolysis, volatilization, degradation, leaching, and runoff during application. In this context, the use of a delivery system, based on poly (lactic-co-glycolic acid) nanoparticles (PLGA NPs) represents an innovative approach to develop new pesticide formulations to successfully fight B. cinerea infections. In order to study NPs uptake, B. cinerea conidia and mycelium were treated with PLGA NPs loaded with the high fluorescent probe coumarin 6 (Cu6-PLGA NPs) and analyzed under ApoTome fluorescence microscopy. The observations revealed that 50 nm Cu6-PLGA NPs penetrated into B. cinerea conidia and hyphae, as early as 10 min after administration. Pterostilbene, a natural compound, and fluopyram, a synthetic antifungal, were entrapped in PLGA NPs, added to B. cinerea conidia and mycelium, and their antifungal activity was tested. The results revealed that the compounds loaded in NPs exhibited a higher activity against B. cinerea. These results lay the foundations for the use of PLGA NPs as a new strategy in plant pest management.

Preparation and characterization of quinoa starch nanoparticles as quercetin carriers

Quinoa starch nanoparticles (QSNPs) prepared by nanoprecipitation method under the optimal condition was developed as a carrier for quercetin. The QSNPs prepared under the optimal condition (90 DMSO/H₂O ratio, 10 ethanol/solvent ratio, and ultrasonic oscillation dispersion mode) had the smallest particle size and polymer dispersity index through full factorial design. Compared with maize starch nanoparticles (MSNPs), QSNPs exhibited a smaller particle size of 166.25 nm and a higher loading capacity of 26.62%. Starch nanoparticles (SNPs) interacted with quercetin through hydrogen bonding. V-type crystal structures of SNPs were disappeared and their crystallinity increased after loading with quercetin. QSNPs was more effective in protecting and prolonging quercetin bioactivity because of their small particle sizes and high loading capacities. This study will be useful for preparing starch-based carrier used to load sensitive bioactive compounds.

Production of doxorubicin-loaded PCL nanoparticles through a flow-focusing microfluidic device: encapsulation efficacy and drug release

The present study shows a facile route for producing doxorubicin (DOX)-loaded polycaprolactone (PCL) nanoparticles using a microfluidic device with a flow-focusing platform in a single step. Indeed, the evaluation of the performance of the flow-focusing microfluidic device for the preparation of DOX-loaded PCL (DOX/PCL) nanoparticles with a uniform size distribution and high encapsulation efficiency (EE) by applying the liquid non-solvent precipitation process is very important. Accordingly, the physicochemical characteristics of the DOX/PCL nanoparticles such as their mean size, polydispersity index (PDI), and EE were investigated by studying different parameters such as the flow rate ratio (FRR) and DOX concentration. Also, the release study was carried out at two pH of 5.5 and 7.4. The mean size of DOX/PCL nanoparticles achieved was in the range of 120-320 nm with a PDI ≤ 0.29 and EE between 48% and 87%. Moreover, the release profile of DOX/PCL nanoparticles was sustained for 10 days (≤66%) at pH 7.4. This means that the production process can result in a high EE and low release of the DOX drug.

Microfluidic based nanoparticle synthesis and their potential applications

A lot of substantial innovation in advancement of microfluidic field in recent years to produce nanoparticle reveals a number of distinctive characteristics for instance compactness, controllability, fineness in process, and stability along with minimal reaction amount. Recently, a prompt development, as well as realization in production of nanoparticles in microfluidic environs having dimension of micro to nanometers and constituents extending from metals, semiconductors to polymers, has been made. Microfluidics technology integrates fluid mechanics for production of nanoparticles having exclusive with homogenous sizes, shapes, and morphology, which are utilized in several bioapplications such as biosciences, drug delivery, healthcare, including food engineering. Nanoparticles are usually well-known for having fine and rough morphology because of their small dimensions including exceptional physical, biological, chemical, and optical properties. Though the orthodox procedures need huge instruments, costly autoclaves, use extra power, extraordinary heat loss, as well as take surplus time for synthesis. Additionally, this is fascinating in order to systematize, assimilate, in addition, to reduce traditional tools onto one platform to produce micro and nanoparticles. The synthesis of nanoparticles by microfluidics permits fast handling besides better efficacy of method utilizing the smallest components for process. Herein, we will focus on synthesis of nanoparticles by means of microfluidic devices intended for different bioapplications. This article is protected by copyright. All rights reserved.

Tuning of Hydrogel Architectures by Ionotropic Gelation in Microfluidics: Beyond Batch Processing to Multimodal Diagnostics

Microfluidics is emerging as a promising tool to control physicochemical properties of nanoparticles and to accelerate clinical translation. Indeed, microfluidic-based techniques offer more advantages in nanomedicine over batch processes, allowing fine-tuning of process parameters. In particular, the use of microfluidics to produce nanoparticles has paved the way for the development of nano-scaled structures for improved detection and treatment of several diseases. Here, ionotropic gelation is implemented in a custom-designed microfluidic chip to produce different nanoarchitectures based on chitosan-hyaluronic acid polymers. The selected biomaterials provide biocompatibility, biodegradability and non-toxic properties to the formulation, making it promising for nanomedicine applications. Furthermore, results show that morphological structures can be tuned through microfluidics by controlling the flow rates. Aside from the nanostructures, the ability to encapsulate gadolinium contrast agent for magnetic resonance imaging and a dye for optical imaging is demonstrated. In conclusion, the polymer nanoparticles here designed revealed the dual capability of enhancing the relaxometric properties of gadolinium by attaining Hydrodenticity and serving as a promising nanocarrier for multimodal imaging applications.

Microfluidic assembly of small-molecule prodrug cocktail nanoparticles with high reproducibility for synergistic combination of cancer therapy

Therapeutic nanoparticles (NPs) self-assembled from small molecular (pro)drug entities, opens up novel avenues for the generation of a wide range of drug delivery systems. Particularly, cocktail NPs created by co-assembly of multiple therapeutics often show profound efficacy beyond their individual agents. However, fabrication of synergistic NPs with high reproducibility and capability to deliver multiple therapeutics in a predefined ratio remains a challenge, which deters NP therapeutics from further clinical translation. In this work, a simple but versatile strategy has been developed to combine drug reconstitution and supramolecular nanoassembly to prodrug cocktail nanoparticle fabrication with microfluidics. Prodrugs reconstructed by PUFAylation were self-assembled into hybrid nanoparticles via microfluidic chip to synergistically deliver two chemotherapeutic drugs, 7-ethyl-10-hydroxy camptothecin (SN38) and paclitaxel (PTX), in a single nanoparticle container. In vitro cell-based assays demonstrate that the combinatorial chemotherapy is superior to each prodrug used alone while reduces the dosage of both drugs at the same time. Furthermore, the double-drug combination suppresses colon tumors by 86% at a total dosage of 16.7 mg/kg through synergy, and histological analysis indicates the safety of the hybrid nanoparticles. In general, this work shows that the nanomedicine synthesized by microfluidics provides considerable advantages including better size control and reproducibility, and great potential in effective combination therapy. It is expected to be applied to the fabrication of more chemical agent combination for other cancer types.

Microfluidic Technology for the Production of Hybrid Nanomedicines

Microfluidic technologies have recently been applied as innovative methods for the production of a variety of nanomedicines (NMeds), demonstrating their potential on a global scale. The capacity to precisely control variables, such as the flow rate ratio, temperature, total flow rate, etc., allows for greater tunability of the NMed systems that are more standardized and automated than the ones obtained by well-known benchtop protocols. However, it is a crucial aspect to be able to obtain NMeds with the same characteristics of the previously optimized ones. In this study, we focused on the transfer of a production protocol for hybrid NMeds (H-NMeds) consisting of PLGA, Cholesterol, and Pluronic® F68 from a benchtop nanoprecipitation method to a microfluidic device. For this aim, we modified parameters such as the flow rate ratio, the concentration of core materials in the organic phase, and the ratio between PLGA and Cholesterol in the feeding organic phase. Outputs analysed were the chemico-physical properties, such as size, PDI, and surface charge, the composition in terms of %Cholesterol and residual %Pluronic® F68, their stability to lyophilization, and the morphology via atomic force and electron microscopy. On the basis of the results, even if microfluidic technology is one of the unique procedures to obtain industrial production of NMeds, we demonstrated that the translation from a benchtop method to a microfluidic one is not a simple transfer of already established parameters, with several variables to be taken into account and to be optimized.

Nanomaterials Synthesis through Microfluidic Methods: An Updated Overview

Microfluidic devices emerged due to an interdisciplinary "collision" between chemistry, physics, biology, fluid dynamics, microelectronics, and material science. Such devices can act as reaction vessels for many chemical and biological processes, reducing the occupied space, equipment costs, and reaction times while enhancing the quality of the synthesized products. Due to this series of advantages compared to classical synthesis methods, microfluidic technology managed to gather considerable scientific interest towards nanomaterials production. Thus, a new era of possibilities regarding the design and development of numerous applications within the pharmaceutical and medical fields has emerged. In this context, the present review provides a thorough comparison between conventional methods and microfluidic approaches for nanomaterials synthesis, presenting the most recent research advancements within the field.

Advanced Material Against Human (Including Covid-19) and Plant Viruses: Nanoparticles As a Feasible Strategy

The SARS-CoV-2 virus outbreak revealed that these nano-pathogens have the ability to rapidly change lives. Undoubtedly, SARS-CoV-2 as well as other viruses can cause important global impacts, affecting public health, as well as, socioeconomic development. But viruses are not only a public health concern, they are also a problem in agriculture. The current treatments are often ineffective, are prone to develop resistance, or cause considerable adverse side effects. The use of nanotechnology has played an important role to combat viral diseases. In this review three main aspects are in focus: first, the potential use of nanoparticles as carriers for drug delivery. Second, its use for treatments of some human viral diseases, and third, its application as antivirals in plants. With these three themes, the aim is to give to readers an overview of the progress in this promising area of biotechnology during the 2017-2020 period, and to provide a glance at how tangible is the effectiveness of nanotechnology against viruses. Future prospects are also discussed. It is hoped that this review can be a contribution to general knowledge for both specialized and non-specialized readers, allowing a better knowledge of this interesting topic.

An alginate-poly(acrylamide) hydrogel with TGF-β3 loaded nanoparticles for cartilage repair: Biodegradability, biocompatibility and protein adsorption

Current implantable materials are limited in terms of function as native tissue, and there is still no effective clinical treatment to restore articular impairments. Hereby, a functionalized polyacrylamide (PAAm)-alginate (Alg) Double Network (DN) hydrogel acting as an articular-like tissue is developed. These hydrogels sustain their mechanical stability under different temperature (+4 °C, 25 °C, 40 °C) and humidity conditions (60% and 75%) over 3 months. As for the functionalization, transforming growth factor beta-3 (TGF-β3) encapsulated (NP_TGF-β3) and empty poly(lactide-co-glycolide) (PLGA) nanoparticles (PLGA NPs) are synthesized by using microfluidic platform, wherein the mean particle sizes are determined as 81.44 ± 9.2 nm and 126 ± 4.52 nm with very low polydispersity indexes (PDI) of 0.194 and 0.137, respectively. Functionalization process of PAAm-Alg hydrogels with ester-end PLGA NPs is confirmed by FTIR analysis, and higher viscoelasticity is obtained for functionalized hydrogels. Moreover, cartilage regeneration capability of these hydrogels is evaluated with in vitro and in vivo experiments. Compared with the PAAm-Alg hydrogels, functionalized formulations exhibit a better cell viability. Histological staining, and score distribution confirmed that proposed hydrogels significantly enhance regeneration of cartilage in rats due to stable hydrogel matrix and controlled release of TGF-β3. These findings demonstrated that PAAm-Alg hydrogels showed potential for cartilage repair and clinical application.

Polymer based nanoparticles for biomedical applications by microfluidic techniques: from design to biological evaluation

The development of microfluidic technologies represents a new strategy to produce and test drug delivery systems.

Applying Microfluidics for the Production of the Cationic Liposome-Based Vaccine Adjuvant CAF09b

Subunit vaccines require particulate adjuvants to induce the desired immune responses. Pre-clinical manufacturing methods of adjuvants are often batch dependent, which complicates scale-up for large-scale good manufacturing practice (GMP) production. The cationic liposomal adjuvant CAF09b, composed of dioctadecyldimethylammonium bromide (DDA), monomycoloyl glycerol analogue 1 (MMG) and polyinosinic:polycytidylic acid [poly(I:C)], is currently being clinically evaluated in therapeutic cancer vaccines. Microfluidics is a promising new method for large-scale manufacturing of particle-based medicals, which is scalable from laboratory to GMP production, and a protocol for production of CAF09b by this method was therefore validated. The influence of the manufacture parameters [Ethanol] (20–40% v/v), [Lipid] (DDA and MMG, 6–12 mg/mL) and dimethyl sulfoxide [DMSO] (0–10% v/v) on the resulting particle size, colloidal stability and adsorption of poly(I:C) was evaluated in a design-of-experiments study. [Ethanol] and [DMSO] affected the resulting particle sizes, while [Lipid] and [DMSO] affected the colloidal stability. In all samples, poly(I:C) was encapsulated within the liposomes. At [Ethanol] 30% v/v, most formulations were stable at 21 days of manufacture with particle sizes <100 nm. An in vivo comparison in mice of the immunogenicity to the cervical cancer peptide antigen HPV-16 E7 adjuvanted with CAF09b prepared by lipid film rehydration or microfluidics showed no difference between the formulations, indicating adjuvant activity is intact. Thus, it is possible to prepare suitable formulations of CAF09b by microfluidics.

Formulation and optimization of quinoa starch nanoparticles: Quality by design approach for solubility enhancement of piroxicam

In the present study piroxicam loaded starch nanoparticles were prepared to enhance the solubility of piroxicam by nanoprecipitation technique. The preparation of nanoparticles was carried out as per central composite experimental design protocol, having concentration of starch and drug as independent variables and particle size and polydispersity index (PdI) as dependent variables. The particle size and PdI of piroxicam loaded starch nanoparticles was found to be between 282–870 nm and 0.339–0.772, respectively. After the characterization by FT-IR, TGA, XRD and SEM studies, the optimized batch was evaluated for in-vitro release study, anti-inflammatory activity and anti-oxidant activity. The in-vitro anti-inflammatory activity of piroxicam loaded starch nanoparticles was found to be more than the pure drug piroxicam whereas the anti-oxidant activity of starch is found greater than starch nanoparticles. In-vitro release study showed 98.8% release in 2 h dissolution study following supercase II transport mechanism of drug release.

Synthesis and Antitumor Activity of Doxycycline Polymeric Nanoparticles: Effect on Tumor Apoptosis in Solid Ehrlich Carcinoma

Objectives: The aim of this study was to prepare doxycycline polymeric nanoparticles (DOXY-PNPs) with hope to enhance its chemotherapeutic potential against solid Ehrlich carcinoma (SEC). Methods: Three DOXY-PNPs were formulated by nanoprecipitation method using hydroxypropyl methyl cellulose (HPMC) as a polymer. The prepared DOXY-PNPs were evaluated for the encapsulation efficiency (EE%), the drug loading capacity, particle size, zeta potential (ZP) and the in-vitro release for selection of the best formulation. PNP number 3 was selected for further biological testing based on the best pharmaceutical characters. PNP3 (5 and 10 mg/kg) was evaluated for the antitumor potential against SEC grown in female mice by measuring the tumor mass as well as the expression and immunohistochemical staining for the apoptosis markers; caspase 3 and BAX. Results: The biological study documented the greatest reduction in tumor mass in mice treated with PNP3. Importantly, treatment with 5 mg/kg of DOXY-PNPs produced a similar chemotherapeutic effect to that produced by 10 mg/kg of free DOXY. Further, a significant elevation in mRNA expression and immunostaining for caspase 3 and BAX was detected in mice group treated with DOXY-PNPs. Conclusions: The DOXY-PNPs showed greater antitumor potential against SEC grown in mice and greater values for Spearman’s correlation coefficients were detected when correlation with tumor mass or apoptosis markers was examined; this is in comparison to free DOXY. Hence, DOXY-PNPs should be tested in other tumor types to further determine the utility of the current technique in preparing chemotherapeutic agents and enhancing their properties.

Continuous, high-throughput production of artemisinin-loaded supramolecular cochleates using simple off-the-shelf flow focusing device

Lipid cochleates are gaining increasing interest as drug-carriers. However, their preparation relies on conventional batch processes that are complex, time consuming and lack batch-to-batch reproducibility; presenting a bottleneck for clinical translation. We report an efficient continuous preparation process for artemisinin-loaded cochleates (ART-cochleates) using inexpensive off-the-shelf flow focusing device. By carefully controlling the flow focusing parameters, we showed along with the mechanism that, ART-cochleates of uniform and tuneable size (~180 nm in width and ~1030 nm in length) were obtained with low dispersity (0.18 in width and 0.27 in length), narrow size distribution and high reproducibility compared to the batch process. The device achieved high throughput of 11.5 g/day with ART encapsulation of 64.24 ± 2.5% and loading of 83.37 ± 3.68 mg ART/g of cochleates. Art-cochleates were non-toxic and showed sustained in-vitro release of ART with effective transepithelial permeability across intestinal Caco-2 monolayer (~60% and ~25% transport for pure ART and ART-cochleates, respectively) resulting in better in-vitro bioavailability. The off-the-shelf device is envisioned to be highly promising platform for continuous and high-throughput manufacturing of drug-loaded cochleates in a controlled and reproducible manner. It has potential to enable clinical translation of drug-loaded cochleates with predicable drug release, absorption and bioavailability.

Microfluidic synthesis of methyl jasmonate-loaded PLGA nanocarriers as a new strategy to improve natural defenses in Vitis vinifera

The objective of the present work was to synthesize biopolymeric nanoparticles (NPs) entrapping the resistance-inductor methyl jasmonate (MeJA) to be employed as a novel and alternative strategy in integrated pest management. NPs were prepared by using a continuous flow microfluidic reactor that allows to precisely control some features that are crucial for applications such as size, polydispersion, morphology and reproducibility. Poly(lactic-co-glycolic acid) (PLGA), a biopolymer largely studied for its use in biological applications, was chosen for the production of NPs entrapping MeJA, a biotic endogenous elicitor able to trigger plant’s defense responses. The effect of different fluid-dynamic conditions, PLGA molecular weight and concentration on NP properties (dimensions, polydispersion, morphology, stability) was evaluated. DLS and SEM were employed to characterize the obtained NPs. MeJA-loaded PLGA NPs ranging from 40 to 70 nm were administered to Vitis vinifera cell cultures, in order to evaluate the biological response in terms of stilbene biosynthesis. HPLC investigations showed a faster response when the elicitor was administered by PLGA NPs in comparison with free MeJA. This result demonstrates that the encapsulation in PLGA NPs significantly promotes MeJA cell uptake and the activation of MeJA-induced responses.

Anti-Candida Biofilm Activity of Pterostilbene or Crude Extract from Non-Fermented Grape Pomace Entrapped in Biopolymeric Nanoparticles

Polymeric nanoparticle-based carriers are promising agents to deliver drugs to cells. Vitis vinifera phenolic compounds are known for their antifungal activity against Candida albicans. The aim of the present study was to investigate the antifungal activity of pterostilbene or crude extracts from non-fermented grape pomace, entrapped in poly(lactic-co-glycolic) acid nanoparticles (NPs), with diameters of 50 and 150 nm, on Candida biofilm. The fluorescent probe coumarin 6 was used to study the uptake of poly(lactic-co-glycolic)acid (PLGA) NPs in planktonic cells and biofilm. The green fluorescent signal of coumarin 6 was observed in Candida biofilm after 24 and 48 hours. Both pterostilbene and crude pomace extract entrapped in NPs exerted a significantly higher anti-biofilm activity compared to their free forms. The entrapment efficiency of both pterostilbene and crude pomace extract in PLGA NPs was ~90%. At 16 µg/mL, pterostilbene loaded in PLGA NPs reduced biofilm formation of 63% and reduced mature biofilm of 50%. Moreover, at 50 µg/mL, the pomace extract loaded in NPs reduced mature biofilm of 37%. These results strongly suggest that PLGA NPs are promising nanodevices for the delivery of antifungal drugs as the crude grape pomace extract, a by-product of white wine making.

Polymeric nanoparticles as an alternative for application of gibberellic acid in sustainable agriculture: a field study

Nanocarrier systems for the encapsulation of agrochemicals can contribute to sustainable agriculture, but few nanosystems have been developed for plant growth regulators (PGRs). The present study evaluated the effects of seed priming using alginate/chitosan (nanoALG/CS) and chitosan/tripolyphosphate (nanoCS/TPP) containing GA3 on the growth and productivity of Solanum lycopersicum cultivated under field conditions. The results demonstrated that nanocarrier systems could improve fruit production, with the productivity increasing almost 4-fold using nanoALG/CS-GA3. This pioneering study demonstrates the potential of nanocarrier systems with PGRs for applications in agriculture.

Utilization of Microfluidics for the Preparation of Polymeric Nanoparticles for the Antioxidant Rutin: A Comparison with Bulk Production

OBJECTIVE

To compare the characteristics of rutin-loaded PLGA (poly(lactic-coglycolic acid)) nanoparticles prepared using a single emulsion evaporation method (bulk method) and a nanoprecipitation method using microfluidics.

METHODS

Rutin-loaded PLGA nanoparticles were produced using different methods and characterized for size, zeta potential, entrapment efficiency (EE) and drug loading (DL). A design of experiments approach was used to identify the effect of method parameters to optimize the formulation. DSC was used to investigate the solid-state characteristics of rutin and PLGA and identify any interactions in the rutin-loaded PLGA nanoparticles. The release of rutin from PLGA nanoparticles was examined in biorelevant media and phosphate buffer (PBS).

RESULTS

The optimal formulation of rutin-loaded PLGA nanoparticles produced using a microfluidics method resulted in a higher entrapment efficiency of 34 ± 2% and a smaller size of 123 ± 4 nm compared to a bulk method (EE 27 ± 1%, size 179 ± 13 nm). The solidstate of rutin and PLGA changed from crystalline to amorphous with the preparation of rutin- loaded PLGA nanoparticles. More importantly, using microfluidics, rutin released faster from rutin-loaded PLGA nanoparticles in biorelevant media and PBS with higher burst release compared to the rutin release from the nanoparticles prepared by using the bulk method.

CONCLUSION

Rutin can be encapsulated in nanoparticles formulated with different methods with mean sizes of less than 200 nm. Microfluidics produced more uniform rutin-loaded PLGA nanoparticles with a higher EE, DL and faster release compared to a bulk production method.

Microfluidic assisted synthesis of PLGA drug delivery systems

Poly(lactic-co-glycolic acid) (PLGA) is a biocompatible and biodegradable polymer that recently attracted attention for use as part of drug delivery systems (DDS). In this context, there is an emerging need for a rapid, reliable and reproducible method of synthesis. Here, microfluidic systems provide great opportunities for synthesizing carriers in a tightly controlled manner and with low consumption of materials, energy and time. These miniature devices have been the focus of recent research since they can address the challenges inherent to the bulk system, e.g. low drug loading efficiency and encapsulation, broad size distribution and burst initial release. In this article, we provide an overview of current microfluidic systems used in drug delivery production, with a special focus on PLGA-based DDS. In this context, we highlight the advantages associated with the use of microchip systems in the fabrication of nanoparticles (NPs) and microparticles (MPs), e.g. in achieving complex morphologies. Furthermore, we discuss the challenges for selecting proper microfluidics for targeted DDS production in a translational setting and introduce strategies that are used to overcome microfluidics shortcomings, like low throughput for production.

Poly(lactic-co-glycolic acid) (PLGA) is a biocompatible and biodegradable polymer that recently attracted attention for use as part of drug delivery systems (DDS).

Microfluidics for the Production of Nanomedicines: Considerations for Polymer and Lipid-based Systems

BACKGROUND

Microfluidics is becoming increasingly of interest as a superior technique for the synthesis of nanoparticles, particularly for their use in nanomedicine. In microfluidics, small volumes of liquid reagents are rapidly mixed in a microchannel in a highly controlled manner to form nanoparticles with tunable and reproducible structure that can be tailored for drug delivery. Both polymer and lipid-based nanoparticles are utilized in nanomedicine and both are amenable to preparation by microfluidic approaches.

AIM

Therefore, the purpose of this review is to collect the current state of knowledge on the microfluidic preparation of polymeric and lipid nanoparticles for pharmaceutical applications, including descriptions of the main synthesis modalities. Of special interest are the mechanisms involved in nanoparticle formation and the options for surface functionalisation to enhance cellular interactions.

CONCLUSION

The review will conclude with the identification of key considerations for the production of polymeric and lipid nanoparticles using microfluidic approaches.

PLGA-Based Nanoparticles in Cancer Treatment

Nanomedicines can be used for a variety of cancer therapies including tumor-targeted drug delivery, hyperthermia, and photodynamic therapy. Poly (lactic-co-glycolic acid) (PLGA)-based materials are frequently used in such setups. This review article gives an overview of the properties of previously reported PLGA nanoparticles (NPs), their behavior in biological systems, and their use for cancer therapy. Strategies are emphasized to target PLGA NPs to the tumor site passively and actively. Furthermore, combination therapies are introduced that enhance the accumulation of NPs and, thereby, their therapeutic efficacy. In this context, the huge number of reports on PLGA NPs used as drug delivery systems in cancer treatment highlight the potential of PLGA NPs as drug carriers for cancer therapeutics and encourage further translational research.

Polymer nanoparticle sizes from dynamic light scattering and size exclusion chromatography: the case study of polysilanes

Dynamic light scattering (DLS) and size exclusion chromatography (SEC) are among the most popular methods for determining polymer sizes in solution. Taking dendritic and network polysilanes as a group of least soluble polymer substances, we critically compare and discuss the difference between nanoparticle sizes, obtained by DLS and SEC. Polymer nanoparticles are typically in poor solution conditions below the theta point and are therefore in the globular conformation. The determination of particle sizes in the presence of attractive interactions is not a trivial task. The only possibility to measure, aggregation-free, the true molecular size of polymer nanoparticles in such a solution regime, is to perform the experiment with a dilute solution of globules (below the theta point and above the miscibility line). Based on the results of our polysilane measurements, we come to a conclusion that DLS provides more reliable results than SEC for dilute solutions of globules. General implications for the size measurements of polymer nanoparticles in solution are discussed.

Endocytic pathways involved in PLGA nanoparticle uptake by grapevine cells and role of cell wall and membrane in size selection

PLGA NPs' cell uptake involves different endocytic pathways. Clathrin-independent endocytosis is the main internalization route. The cell wall plays a more prominent role than the plasma membrane in NPs' size selection. In the last years, many studies on absorption and cell uptake of nanoparticles by plants have been conducted, but the understanding of the internalization mechanisms is still largely unknown. In this study, polydispersed and monodispersed poly(lactic-co-glycolic) acid nanoparticles (PLGA NPs) were synthesized, and a strategy combining the use of transmission electron microscopy (TEM), confocal analysis, fluorescently labeled PLGA NPs, a probe for endocytic vesicles (FM4-64), and endocytosis inhibitors (i.e., wortmannin, ikarugamycin, and salicylic acid) was employed to shed light on PLGA NP cell uptake in grapevine cultured cells and to assess the role of the cell wall and plasma membrane in size selection of PLGA NPs. The ability of PLGA NPs to cross the cell wall and membrane was confirmed by TEM and fluorescence microscopy. A strong adhesion of PLGA NPs to the outer side of the cell wall was observed, presumably due to electrostatic interactions. Confocal microscopy and treatment with endocytosis inhibitors suggested the involvement of both clathrin-dependent and clathrin-independent endocytosis in cell uptake of PLGA NPs and the latter appeared to be the main internalization pathway. Experiments on grapevine protoplasts revealed that the cell wall plays a more prominent role than the plasma membrane in size selection of PLGA NPs. While the cell wall prevents the uptake of PLGA NPs with diameters over 50 nm, the plasma membrane can be crossed by PLGA NPs with a diameter of 500-600 nm.