Electrospinning of polycaprolacton/chitosan core-shell nanofibers by a stable emulsion system

Evaluation of the effects of cartilage decellularized ECM in optimizing PHB-chitosan-HNT/chitosan-ECM core-shell electrospun scaffold: Physicochemical and biological properties

Cartilage regeneration is still a highly challenging field due to its low self-healing ability. This study used a core-shell electrospinning technique to enhance cartilage tissue engineering by incorporating cartilage extracellular matrix (ECM). The core of fibers included poly(3-hydroxybutyrate)-Chitosan (PHB-Cs) and Halloysite nanotubes. The shell of fibers consisted of Cs and ECM (0, 1, 3, 5 wt%). Subsequently, the scaffolds were named 0E, 1E, 3E, and 5E. The study aimed to assess the impact of ECM on cellular behavior and chondrogenesis. Our findings indicate that ECM reduced fiber diameter from 775 nm for the 0E scaffold to 454 nm for the 1E scaffold. Water contact angle measurements revealed an increasing trend by ECM addition, from 42° for 0E to 67° for 1E. According to mechanical analysis, the 1E scaffold represented the highest strength (5.81 MPa) and strain (3.17%). Based on these analyses, the 1E was considered the optimum scaffold. MTT analysis showed cell viability of over 80% for the 0E and 1E. Also, the gene expression level was assessed for Collagen II, Aggrecan, SOX 9, and Collagen X. The results represented that in the 1E scaffold Collagen II, Aggrecan, and SOX 9 were more upregulated at the end of the 21st day. However, in the 1E scaffold collagen X, as a hypertrophy marker, was downregulated at the end of the experiment. Overall, these results confirmed the potential of the 1E scaffold to be introduced as a promising cartilage tissue engineering scaffold for further studies.

Preparation of starch-based oral fast-disintegrating nanofiber mats for astaxanthin encapsulation and delivery via emulsion electrospinning

Developing green and efficient delivery systems to promote bioavailability of bioactive ingredients is a sustained demand in food industry. In this work, the astaxanthin (AST)-loaded starch-based fast-dissolving nanofibers with core-shell structure were prepared by emulsion electrospinning technique without using any organic solvent. To load water-insoluble AST in hydrophilic octenyl succinic anhydride starch (OSAS)/polyvinyl alcohol (PVA) nanofiber matrices, AST-loaded nanoscale emulsions (212.19 ± 5.63 nm) with high encapsulation efficiency (91.54 ± 0.14 %) were prepared as a precursor for emulsion electrospinning, using OSAS/PVA aggregates as an emulsifier. The core-shell structure of nanofibers was revealed by the Transmission electron microscopy (TEM), with average diameter of 509.58 ± 12.77 nm, and 88.64 ± 0.49 % for AST were effectively encapsulated in core layer. Nanofiber mats exhibited high encapsulation efficiency (85.11 ± 1.53 %) and excellent storage stability over 7 d. Meanwhile, amorphous transformation of AST enabled it possess higher water solubility, bioaccessibility, and antioxidant properties (97.72 ± 2.17 %) than free AST in aqueous system. The results demonstrated that the green, nontoxic, and biodegradable nanofiber mats prepared by emulsion electrospinning successfully realized the encapsulation and delivery of AST, with broad application prospects in the food and pharmaceutical fields.

The pursuit of linear dosage in pharmacy: reservoir-based drug delivery systems from macro to micro scale

INTRODUCTION

The pursuit of linear dosage in pharmacy is essential for achieving consistent therapeutic release and enhancing patient compliance. This review provides a comprehensive summary of zero-order drug delivery systems, with a particular focus on reservoir-based systems emanated from different microfabrication technologies.

AREAS COVERED

The consideration of recent advances in drug delivery systems is given to encompass the key areas including the importance of achieving a constant drug release rate for therapeutic applications. Detailed examination of reservoir-based systems, their design, mechanisms of action and materials used are highlighted. By addressing these areas, the discussion aims to provide a thorough understanding of most recent zero-order drug delivery systems, their performance advantages and methods of their manufacturing. To ensure the complete coverage of the explored research area, modern AI-assistant tools were used to find not only the most relevant, but also connected and similar articles.

EXPERT OPINION

Future developments in reservoir-based drug delivery systems are expected to significantly enhance therapeutic effectiveness and patient outcomes through the integration of innovative materials and technologies. The fabrication of intelligent drug delivery systems that utilize sensors and feedback mechanisms can enable real-time monitoring of drug release and patient reactions.

Core-Sheath Fibers via Single-Nozzle Spinneret Electrospinning of Emulsions and Homogeneous Blend Solutions

The preparation of core-sheath fibers by electrospinning is a topic of significant interest for producing composite fibers with distinct core and sheath functionalities. Moreover, in core-sheath fibers, low-molecular-weight substances or nanosized inorganic additives can be deposited in a targeted manner within the core or the sheath. Commonly, for obtaining a core-sheath structure, coaxial electrospinning is used. It requires a coaxial spinneret and suitable immiscible solvents for the inner and outer solutions. The single-nozzle spinneret electrospinning of emulsions can address these issues, but use of a stabilizing agent is needed. A third approach-preparation of core-sheath fibers by single-nozzle spinneret electrospinning of homogeneous blend solutions of two polymers or of a polymer/low-molecular-weight substance-has been much less studied. It circumvents the difficulties associated with the coaxial and the emulsion electrospinning and is thoroughly discussed in this review. The formation of core-sheath fibers in this case is attributed to phase-separation-driven self-organization during the electrospinning process. Some possibilities for obtaining core-double sheath fibers using the same method are also indicated. The gained knowledge on potential applications of core-sheath fibers prepared by single-nozzle spinneret electrospinning of emulsions and homogeneous blend solutions is also discussed.

Multilayer Nanocarrier for the Codelivery of Interferons: A Promising Strategy for Biocompatible and Long-Acting Antiviral Treatment

Background: Interferons (IFNs) are cytokines involved in the immune response with a synergistic regulatory effect on the immune response. They are therapeutics for various viral and proliferative conditions, with proven safety and efficacy. Their clinical application is challenging due to the molecules' size, degradation, and pharmacokinetics. We are working on new drug delivery systems that provide adequate therapeutic concentrations for these cytokines and prolong their half-life in the circulation, such as nanoformulations. Methods: Through nanoencapsulation using electrospray technology and biocompatible and biodegradable polymers, we are developing a controlled release system based on nanoparticles for viral infections of the respiratory tract. Results: We developed a controlled release system for viral respiratory tract infections. A prototype nanoparticle with a core was created, which hydrolyzed the polyvinylpyrrolidone (PVP) shell , releasing the active ingredients interferon-alpha (IFN-α) and interferon-gamma (IFN-γ). The chitosan (QS) core degraded slowly, with a controlled release of IFN-α. The primary and rapid effect of the interferon combination ensured an antiviral and immunoregulatory response from day one, induced by IFN-α and enhanced by IFN-γ. The multilayer design demonstrated an optimal toxicity profile. Conclusions: This formulation is an inhaled dry powder intended for the non-invasive intranasal route. The product does not require a cold chain and has the potential for self-administration in the face of emerging viral infections. This novel drug has applications in multiple infectious, oncological, and autoimmune conditions, and further development is proposed for its therapeutic potential. This prototype would ensure greater bioavailability, controlled release, fewer adverse effects, and robust biological action through the simultaneous action of both molecules.

Emulsion electrospun epigallocatechin gallate-loaded silk fibroin/polycaprolactone nanofibrous membranes for enhancing guided bone regeneration

Guided bone regeneration (GBR) membranes play an important role in oral bone regeneration. However, enhancing their bone regeneration potential and antibacterial properties is crucial. Herein, silk fibroin (SF)/polycaprolactone (PCL) core-shell nanofibers loaded with epigallocatechin gallate (EGCG) were prepared using emulsion electrospinning. The nanofibrous membranes were characterized via scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, water contact angle (CA) measurement, mechanical properties testing, drug release kinetics, and 1,1-diphenyl-2-picryl-hydrazyl radical (DPPH) free radical scavenging assay. Mouse pre-osteoblast MC3T3-E1 cells were used to assess the biological characteristics, cytocompatibility, and osteogenic differentiation potential of the nanofibrous membrane. Additionally, the antibacterial properties againstStaphylococcus aureus (S. aureus)andEscherichia coli (E. coli)were evaluated. The nanofibers prepared by emulsion electrospinning exhibited a stable core-shell structure with a smooth and continuous surface. The tensile strength of the SF/PCL membrane loaded with EGCG was 3.88 ± 0.15 Mpa, the water CA was 50°, and the DPPH clearance rate at 24 h was 81.73% ± 0.07%. The EGCG release rate of membranes prepared by emulsion electrospinning was reduced by 12% within 72 h compared to that of membranes prepared via traditional electrospinning.In vitroexperiments indicate that the core-shell membranes loaded with EGCG demonstrated good cell compatibility and promoted adhesion, proliferation, and osteogenic differentiation of MC3T3-E1 cells. Furthermore, the EGCG-loaded membranes exhibited inhibitory effects onE. coliandS. aureus. These findings indicate that core-shell nanofibrous membranes encapsulated with EGCG prepared using emulsion electrospinning possess good antioxidant, osteogenic, and antibacterial properties, making them potential candidates for research in GBR materials.

In vitro release modeling of beta-carotene from Bene oleosome and electrosprayed Quince seed hydrocolloids loaded with oleosomes containing beta-carotene

This research aimed to extract oleosome from the Bene kernel as a carrier of beta-carotene (3, 5, and 10 % w/w) and then use oleosomes in the Quince seed gum (QSG) electrosprayed nanoparticles for the sustained release of beta-carotene in food simulant. Oleosomes loaded with 5 % w/w beta-carotene had the highest encapsulation efficiency (94.53 % ± 1.23 %) and were used at 1, 3, and 5 % w/w in the QSG electrosprayed nanoparticles. Electrospray feed solutions containing 5 % oleosomes loaded with beta-carotene had the highest zeta potential (-34.45 ± 0.58 mV) and the lowest surface tension (23.47 ± 1.10 mN/m). FESEM images showed that with the increase of oleosomes up to 3 % w/w, the average size of the electrosprayed particles decreases. The Fourier transform infrared (FTIR) test proved the presence of protein in the oleosomes and their successful extraction from Bene seeds. Differential scanning calorimetry (DSC) and FTIR proved the successful entrapment of beta-carotene in the oleosomes structure and the successful placement of oleosomes containing beta-carotene in the electrosprayed nanoparticles. The predominant driving force involving the release of beta-carotene from the designed structures in food simulants was the Fickian release mechanism. The Peleg model was introduced as the best model describing the beta-carotene release.

Improvement of Osteogenic Differentiation of Mouse Pre-Osteoblastic MC3T3-E1 Cells on Core-Shell Polylactic Acid/Chitosan Electrospun Scaffolds for Bone Defect Repair

Electrospun hybrid scaffolds composed of synthetic and natural polymers have gained increasing interest in tissue engineering applications over the last decade. In this work, scaffolds composed of polylactic acid electrospun fibers, either treated (P-PLA) or non-treated (PLA) with air-plasma, were coated with high molecular weight chitosan to create a core-shell microfibrous structure. The effective thickness control of the chitosan layer was confirmed by gravimetric, spectroscopic (FTIR-ATR) and morphological (SEM) investigations. The chitosan coating increased the fiber diameter of the microfibrous scaffolds while the tensile mechanical tests, conducted in dry and wet environments, showed a reinforcing action of the coating layer on the scaffolds, in particular when deposited on P-PLA samples. The stability of the Chi coating on both PLA and P-PLA substrates was confirmed by gravimetric analysis, while their mineralization capacity was evaluated though scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS) after immersing the scaffolds in simulated body fluids (SBF) at 37 °C for 1 week. Sample biocompatibility was investigated through cell viability assay and SEM analysis on mouse pre-osteoblastic MC3T3-E1 cells grown on scaffolds at different times (1, 7, 14 and 21 days). Finally, Alizarin Red assay and qPCR analysis suggested that the combination of plasma treatment and chitosan coating on PLA electrospun scaffolds influences the osteoblastic differentiation of MC3T3-E1 cells, thus demonstrating the great potential of P-PLA/chitosan hybrid scaffolds for bone tissue engineering applications.

Application of Electrospun Drug-Loaded Nanofibers in Cancer Therapy

In the 21st century, chemotherapy stands as a primary treatment method for prevalent diseases, yet drug resistance remains a pressing challenge. Utilizing electrospinning to support chemotherapy drugs offers sustained and controlled release methods in contrast to oral and implantable drug delivery modes, which enable localized treatment of distinct tumor types. Moreover, the core-sheath structure in electrospinning bears advantages in dual-drug loading: the core and sheath layers can carry different drugs, facilitating collaborative treatment to counter chemotherapy drug resistance. This approach minimizes patient discomfort associated with multiple-drug administration. Electrospun fibers not only transport drugs but can also integrate metal particles and targeted compounds, enabling combinations of chemotherapy with magnetic and heat therapies for comprehensive cancer treatment. This review delves into electrospinning preparation techniques and drug delivery methods tailored to various cancers, foreseeing their promising roles in cancer treatment.

Preparation of PCL/lecithin/bacteriocin CAMT6 antimicrobial and antioxidant nanofiber films using emulsion electrospinning: Characteristics and application in chilled salmon preservation

Multi-functional packaging materials are an important development for food preservation. Emulsion electrospinning is a novel and simple method that can be used to prepare multi-functional packaging materials, which can effectively protect the loaded active substances during the preparation process. In this study, PCL/lecithin/bacteriocin CAMT6 nanofiber films with antimicrobial and antioxidant activity were prepared by emulsion electrostatic spinning. The morphology and homogeneity of the prepared nanofibrous membranes could be improved by optimising the formulation of the emulsion for electrospinning. Analytical testing of the prepared nanofiber films revealed that the nanofibers had a core-shell structure, with bacteriocin CAMT6 effectively encapsulated in the core layer and the PCL and phospholipids homogeneously mixed to form the shell layer. Additionally, the nanofiber films had acceptable tensile properties and water absorption capacity. In chilled salmon meat, the nanofiber film effectively inhibited the growth of bacteria, slowed the oxidation of oil and slowed water loss, which was a good protective effect. This study provides a reference for the encapsulation application of food-active packaging materials and bacteriocins.

Chitosan, polyethylene oxide/polycaprolactone electrospun core/shell nanofibrous mat containing rosuvastatin as a novel drug delivery system for enhancing human mesenchymal stem cell osteogenesis

Introduction: Due to the potential positive effects of rosuvastatin (RSV) on human mesenchymal stem cells (MSCs) osteogenesis and new bone regeneration, it is crucial to develop a suitable carrier that can effectively control the release profile of RSV. The primary objective of this study was to introduce a novel drug delivery system based on core/shell nanofibrous structures, enabling a sustained release of RSV. Methods: To achieve this, coaxial electrospinning was employed to fabricate chitosan (CS)+polyethylene oxide (PEO)/polycaprolactone (PCL) nanofibrous mats, wherein RSV was incorporated within the core of nanofibers. By optimizing the relevant parameters of the electrospinning process, the mats' surface was further modified using plasma treatment. The fibers' shape, structure, and thermal stability were characterized. The wettability, and degradation properties of the fabricated mats were also examined. In vitro studies were conducted to examine the release behavior of RSV. Additionally, the capability of MSCs to survive and differentiate into osteocytes when cultured on nanofibers containing RSV was evaluated. Results: Results demonstrated the successful fabrication of CS + PEO + RSV/PCL core/shell mats with a core diameter of approximately 370 nm and a shell thickness of around 70 nm under optimized conditions. Plasma treatment was found to enhance the wettability and drug-release behavior of the mats. The nanofibrous structure, serving as a carrier for RSV, exhibited increased proliferation of MSCs and enhanced osteogenic differentiation. Conclusion: Therefore, it can be concluded that CS + PEO + RSV/PCL core/shell nanofibrous structure can be utilized as a sustained-release platform for RSV over an extended period, making it a promising candidate for guided bone regeneration.

Effect of Drug Encapsulation and Hydrothermal Exposure on the Structure and Molecular Dynamics of the Binary System Poly(3-hydroxybutyrate)-chitosan

In this work, film materials based on binary compositions of poly-(3-hydroxybutyrate) (PHB) and chitosan with different ratios of polymer components in the range from 0/100 to 100/0 wt. % were studied. Using a combination of thermal (DSC) and relaxation (EPR) measurements, the influence of the encapsulation temperature of the drug substance (DS) of dipyridamole (DPD) and moderately hot water (at 70 °C) on the characteristics of the PHB crystal structure and the diffusion rotational mobility of the stable TEMPO radical in the amorphous regions of the PHB/chitosan compositions is shown. The low-temperature extended maximum on the DSC endotherms made it possible to obtain additional information about the state of the chitosan hydrogen bond network. This allowed us to determine the enthalpies of thermal destruction of these bonds. In addition, it is shown that when PHB and chitosan are mixed, significant changes are observed in the degree of crystallinity of PHB, degree of destruction of hydrogen bonds in chitosan, segmental mobility, sorption capacity of the radical, and the activation energy of rotational diffusion in the amorphous regions of the PHB/chitosan composition. The characteristic point of polymer compositions was found to correspond to the ratio of the components of the mixture 50/50%, for which the inversion transition of PHB from dispersed material to dispersion medium is assumed. Encapsulation of DPD in the composition leads to higher crystallinity and to a decrease in the enthalpy of hydrogen bond breaking, and it also slows down segmental mobility. Exposure to an aqueous medium at 70 °C is also accompanied by sharp changes in the concentration of hydrogen bonds in chitosan, the degree of PHB crystallinity, and molecular dynamics. The conducted research made it possible for the first time to conduct a comprehensive analysis of the mechanism of action of a number of aggressive external factors (such as temperature, water, and the introduced additive in the form of a drug) on the structural and dynamic characteristics of the PHB/chitosan film material at the molecular level. These film materials have the potential to serve as a therapeutic system for controlled drug delivery.

Preparation and Properties of (Sc2O3-MgO)/Pcl/Pvp Electrospun Nanofiber Membranes for the Inhibition of Escherichia coli Infections

Due to their high porosity, large specific surface area, and structural similarity with the extracellular matrix (ECM), electrospun nanofiber membranes are often endowed with the antibacterial properties for biomedical applications. The purpose of this study was to synthesize nano-structured Sc2O3-MgO by doping Sc³⁺, calcining at 600 °C, and then loading it onto the PCL/PVP substrates with electrospinning technology with the aim of developing new efficient antibacterial nanofiber membranes for tissue engineering. A scanning electron microscope (SEM) and energy dispersive X-ray spectrometer (EDS) were used to study the morphology of all formulations and analyze the types and contents of the elements, and an X-ray diffraction (XRD), thermogravimetric analysis (TGA), and Fourier transform attenuated total reflection infrared spectroscopy (ATR-FTIR) were used for further analysis. The experimental results showed that the PCL/PVP (SMCV-2.0) nanofibers loaded with 2.0 wt% Sc₂O₃-MgO were smooth and homogeneous with an average diameter of 252.6 nm; the antibacterial test indicated that a low load concentration of 2.0 wt% Sc2O3-MgO in PCL/PVP (SMCV-2.0) showed a 100% antibacterial rate against Escherichia coli (E. coli).

A review on polysaccharides mediated electrospun nanofibers for diabetic wound healing: Their current status with regulatory perspective

The current treatment strategies for diabetic wound care provide only moderate degree of effectiveness; hence new and improved therapeutic techniques are in great demand. Diabetic wound healing is a complex physiological process that involves synchronisation of various biological events such as haemostasis, inflammation, and remodelling. Nanomaterials like polymeric nanofibers (NFs) offer a promising approach for the treatment of diabetic wounds and have emerged as viable options for wound management. Electrospinning is a powerful and cost-effective method to fabricate versatile NFs with a wide array of raw materials for different biological applications. The electrospun NFs have unique advantages in the development of wound dressings due to their high specific surface area and porosity. The electrospun NFs possess a unique porous structure and biological function similar to the natural extracellular matrix (ECM), and are known to accelerate wound healing. Compared to traditional dressings, the electrospun NFs are more effective in healing wounds owing to their distinct characteristics, good surface functionalisation, better biocompatibility and biodegradability. This review provides a comprehensive overview of the electrospinning procedure and its operating principle, with special emphasis on the role of electrospun NFs in the treatment of diabetic wounds. This review discusses the present techniques applied in the fabrication of NF dressings, and highlights the future prospects of electrospun NFs in medicinal applications.

Electrospun Polycaprolactone/Chitosan Nanofibers Containing Cordia myxa Fruit Extract as Potential Biocompatible Antibacterial Wound Dressings

The goal of the current work was to create an antibacterial agent by using polycaprolactone/chitosan (PCL/CH) nanofibers loaded with Cordia myxa fruit extract (CMFE) as an antimicrobial agent for wound dressing. Several characteristics, including morphological, physicomechanical, and mechanical characteristics, surface wettability, antibacterial activity, cell viability, and in vitro drug release, were investigated. The inclusion of CMFE in PCL/CH led to increased swelling capability and maximum weight loss. The SEM images of the PCL/CH/CMFE mat showed a uniform topology free of beads and an average fiber diameter of 195.378 nm. Excellent antimicrobial activity was shown towards Escherichia coli (31.34 ± 0.42 mm), Salmonella enterica (30.27 ± 0.57 mm), Staphylococcus aureus (21.31 ± 0.17 mm), Bacillus subtilis (27.53 ± 1.53 mm), and Pseudomonas aeruginosa (22.17 ± 0.12 mm) based on the inhibition zone assay. The sample containing 5 wt% CMFE had a lower water contact angle (47 ± 3.7°), high porosity, and high swelling compared to the neat mat. The release of the 5% CMFE-loaded mat was proven to be based on anomalous non-Fickian diffusion using the Korsmeyer–Peppas model. Compared to the pure PCL membrane, the PCL-CH/CMFE membrane exhibited suitable cytocompatibility on L929 cells. In conclusion, the fabricated antimicrobial nanofibrous films demonstrated high bioavailability, with suitable properties that can be used in wound dressings.

Water-in-water emulsions stabilized by self-assembled chitosan colloidal particles

Dextran (Dex) and poly(ethylene glycol) (PEG)-based aqueous emulsions were stabilized using the self-assembled chitosan colloidal particles (CS CPs). Besides, the effects of pH, CS CPs concentration, polymer concentration, volume ratio of PEG solution to Dex solution, temperature, homogenizing speed and homogenizing time on the property of the W/W emulsions were investigated, respectively. In order to enhance the stability of the PEG-Dex emulsion, sodium tripolyphosphate was used to cross-link the CS CPs at the interface of emulsion droplets, which resulted in the stability duration for >1 year. Finally, the CS CPs were used as a support to immobilize urease and bovine serum albumin and a stabilizer to prepare W/W emulsion, which were then adopted as a catalysis system and as a spinning solution to fabricate drug-loaded nanofiber. This strategy potentially provides a new opportunity to encapsulate the active molecules at the water-water interface, and enrich the types of usable active molecules in the encapsulation in the W/W emulsions.

Unique Fiber Morphologies from Emulsion Electrospinning—A Case Study of Poly(ε-caprolactone) and Its Applications

The importance of electrospinning to produce biomimicking micro- and nano-fibrous matrices is realized by many who work in the area of fibers. Based on the solubility of the materials to be spun, organic solvents are typically utilized. The toxicity of the utilized organic solvent could be extremely important for various applications, including tissue engineering, biomedical, agricultural, etc. In addition, the high viscosities of such polymer solutions limit the use of high polymer concentrations and lower down productivity along with the limitations of obtaining desired fiber morphology. This emphasizes the need for a method that would allay worries about safety, toxicity, and environmental issues along with the limitations of using concentrated polymer solutions. To mitigate these issues, the use of emulsions as precursors for electrospinning has recently gained significant attention. Presence of dispersed and continuous phase in emulsion provides an easy route to incorporate sensitive bioactive functional moieties within the core-sheath fibers which otherwise could only be hardly achieved using cumbersome coaxial electrospinning process in solution or melt based approaches. This review presents a detailed understanding of emulsion behavior during electrospinning along with the role of various constituents and process parameters during fiber formation. Though many polymers have been studied for emulsion electrospinning, poly(ε-caprolactone) (PCL) is one of the most studied polymers for this technique. Therefore, electrospinning of PCL based emulsions is highlighted as unique case-study, to provide a detailed theoretical understanding, discussion of experimental results along with their suitable biomedical applications.

Electrospun Porous Nanofibers with Imprinted Patterns Induced by Phase Separation of Immiscible Polymer Blends

Nanofibrous nonwoven fabrics have attracted attention as porous adsorbents with high specific surface areas for the safe and efficient treatment of spilled organic dyes and petroleum. For this purpose, a method of fabricating porous nanofibers with high specific surface areas would be highly beneficial. In this study, the phase separation in nanofibers electrospun from blended solutions of immiscible polymers [poly(styrene) (PS) and poly(vinylpyrrolidone) (PVP)] was investigated. The removal of PVP as a sacrificial polymer afforded the imprinting of mesopores (40-70 nm) in the PS nanofibers. The effects of solution composition (PS/PVP in N,N-dimethylformamide) on the structure formation in the fibers were investigated. The nanofibers thus obtained could selectively adsorb low-molecular-weight hydrophobic dyes, such as Nile Red and Oil Red O. Thus, it is expected that the combined approach of electrospinning of immiscible polymer blends and phase separation-induced patterning can be applied to the fabrication of functional nanofibers for diverse applications.

Recycling and Reutilizing Polymer Waste via Electrospun Micro/Nanofibers: A Review

The accumulation of plastic waste resulting from the increasing demand for non-degradable plastics has led to a global environmental crisis. The severe environmental and economic drawbacks of inefficient, expensive, and impractical traditional waste disposal methods, such as landfills, incineration, plastic recycling, and energy production, limit the expansion of their applications to solving the plastic waste problem. Finding novel ways to manage the large amount of disposed plastic waste is urgent. Until now, one of the most valuable strategies for the handling of plastic waste has been to reutilize the waste as raw material for the preparation of functional and high-value products. Electrospun micro/nanofibers have drawn much attention in recent years due to their advantages of small diameter, large specific area, and excellent physicochemical features. Thus, electrospinning recycled plastic waste into micro/nanofibers creates diverse opportunities to deal with the environmental issue caused by the growing accumulation of plastic waste. This paper presents a review of recycling and reutilizing polymer waste via electrospinning. Firstly, the advantages of the electrospinning approach to recycling plastic waste are summarized. Then, the studies of electrospun recycled plastic waste are concluded. Finally, the challenges and future perspectives of electrospun recycled plastic waste are provided. In conclusion, this paper aims to provide a comprehensive overview of electrospun recycled plastic waste for researchers to develop further studies.

Fabrication of chitosan/PVP/dihydroquercetin nanocomposite film for in vitro and in vivo evaluation of wound healing

The high cost of wound healing treatment, the slow recovery of wounds, and the uncertainty of being affected by the body's physiological activities constitute a serious burden on public health. In this work, we report the preparation and characterization of chitosan (CS), PVP, and dihydroquercetin (DHQ) nanofiber film used as wound excipients, as well as in vivo and in vitro evaluations, and verify that the film is effective in wounds. The results show that the prepared film has good morphology, thermal stability and hydrophilicity. In vitro studies have shown that it has antibacterial activity against S.aureus and E.coli, and the DPPH free radical scavenging rate proves that the fiber film has antioxidant activity. MTT cytotoxicity test proved that the film is non-toxic to Hacat cells. Animal experiments have proved that wounds treated with CS-PVP-DHQ nanofiber film heal faster. This article also studied the composite nanofiber film by inducing autophagy pathway and increasing the expression of pan-keratin, vascular endothelial growth factor VEGF and CD31 to promote wound healing. Therefore, the nanofiber film herein show great potential in wound healing applications.

Nanofiber Composite Coating with Self-Healing and Active Anticorrosive Performances

Synergetic self-healing anticorrosion behaviors, by forming a self-assembly protective layer and repairing coating passive barrier, exhibit great potential in handling the notorious metal corrosion phenomenon. Herein, we developed a nanofiber-supported anticorrosion coating with synergistic protection effects of both self-healing and active corrosion inhibition, via a facile electrospinning combined coating technique. Polycaprolactone (PCL) nanofiber integrated with 2-mecapobenzothiazole-loaded halloysite nanotubes (HNTs-MBT) is directly deposited on the surface of metal substrate, forming an interconnected fiber network framework. The encapsulated corrosion inhibitor MBT can be released by a pH-triggered manner to realize instant corrosion protections. Additionally, coating defects could be repeatedly repaired by continuous polymer fiber upon heat treatment and the anticorrosion efficiency effectively remained, even after three cycles of damage-healing. Moreover, the repaired coating also exhibited durable anticorrosion performance, mainly attributed to the synergetic effects of both thermal-triggered bulk healing and active corrosion inhibition. This type of dual-functional coating provides efficient anticorrosive performances and may show great promise in long-term corrosion protection.

Application of Electrospinning in Antibacterial Field

In recent years, electrospun nanofibers have attracted extensive attention due to their large specific surface area, high porosity, and controllable shape. Among the many applications of electrospinning, electrospun nanofibers used in fields such as tissue engineering, food packaging, and air purification often require some antibacterial properties. This paper expounds the development potential of electrospinning in the antibacterial field from four aspects: fiber morphology, antibacterial materials, antibacterial mechanism, and application fields. The effects of fiber morphology and antibacterial materials on the antibacterial activity and characteristics are first presented, then followed by a discussion of the antibacterial mechanisms and influencing factors of these materials. Typical application examples of antibacterial nanofibers are presented, which show the good prospects of electrospinning in the antibacterial field.

Multistructured Electrospun Nanofibers for Air Filtration: A Review

Air filtration materials (AFMs) have gradually become a research hotspot on account of the increasing attention paid to the global air quality problem. However, most AFMs cannot balance the contradiction between high filtration efficiency and low pressure drop. Electrospinning nanofibers have a large surface area to volume ratio, an adjustable porous structure, and a simple preparation process that make them an appropriate candidate for filtration materials. Therefore, electrospun nanofibers have attracted increased attention in air filtration applications. In this paper, first, the preparation methods of high-performance electrospun air filtration membranes (EAFMs) and the typical surface structures and filtration principles of electrospun fibers for air filtration are reviewed. Second, the research progress of EAFMs with multistructures, including nanoprotrusion, wrinkled, porous, branched, hollow, core-shell, ribbon, beaded, nets structure, and the application of these nanofibers in air filtration are summarized. Finally, challenges with the fabrication of EAFMs, limitations of their use, and trends for future developments are presented.

Step-by-step design of poly (ε-caprolactone) /chitosan/Melilotus officinalis extract electrospun nanofibers for wound dressing applications

Composition of polymers and choosing the type of solvents in electrospinning systems is of great importance to achieve a mat with optimal properties. In this work, with emphasizing the influence of a novel solvent system, an electrospun wound dressing was designed in four steps. Firstly, to study the effect of polymer-solvent interactions and electrospinning distance, a constant amount of polycaprolactone (PCL) was dissolved at different compositions of formic acid (FA)/dichloromethane (DCM) and was electrospun at different distances. The composition of 80FA/20DCM and distance of 15 cm were selected as optimal conditions by lowest average diameter of fibers and simultaneously good surface uniformity. In the second step, the concentration of PCL was considered variable to achieve the lowest diameter of fibers. Finally, in the third and fourth steps, different concentrations of chitosan (CN) and constant dosage of Melilotus officinalis (MO) extract were added to the solution. The extract contained fibers had a mean diameter of 275 ± 41 nm which is in the required condition for wound caring. Eventually, the optimized PCL/CN and PCL/CN/MO specimens were evaluated by FTIR, DSC, Tensile, water contact angle, antibacterial assays, cell viability, and drug release analysis for determining their function and properties.

Detecting and targeting neurodegenerative disorders using electrospun nanofibrous matrices: current status and applications

Neurodegeneration is defined as the progressive atrophy and loss of function of neurons; it is present in neurodegenerative disorders such as Multiple Sclerosis, Alzheimer's, Huntington's, and Parkinson's diseases. The detection of such disorders is performed by various imaging modalities while their therapeutic management is quite challenging. Besides, the pathogenesis of neurodegenerative disorders is still under ongoing research due to complex and multi-factorial mechanisms. Currently, targeting the specific proteins responsible for neurodegeneration is of great interest to many researchers. Furthermore, nanotechnology-based approaches for targeting the affected neurons became an emerging field of interest. Nanostructures of various forms have been developed aiming to act as therapeutics for neurodegeneration, in which electrospun nanofibers seem to play an important role as biomedical products for both detection and management of the diseases. Electrospinning is an intriguing method able to produce nanofibers with a wide range of sizes and morphological characteristics. Such nanofibrous matrices can be delivered through different administration routes to target various diseases. In this review, the most recent advancements in electrospun nanofibrous systems that target or detect multiple neurodegenerative diseases have been enlightened and an introduction to the general aspects of neurodegenerative diseases and the electrospinning process has been made. Finally, future perspectives of neurodegeneration targeting were also discussed.

An Overview of Biopolymeric Electrospun Nanofibers Based on Polysaccharides for Wound Healing Management

Currently, despite the thoroughgoing scientific research carried out in the area of wound healing management, the treatment of skin injuries, regardless of etiology remains a big provocation for health care professionals. An optimal wound dressing should be nontoxic, non-adherent, non-allergenic, should also maintain a humid medium at the wound interfacing, and be easily removed without trauma. For the development of functional and bioactive dressings, they must meet different conditions such as: The ability to remove excess exudates, to allow gaseous interchange, to behave as a barrier to microbes and to external physical or chemical aggressions, and at the same time to have the capacity of promoting the process of healing by stimulating other intricate processes such as differentiation, cell adhesion, and proliferation. Over the past several years, various types of wound dressings including hydrogels, hydrocolloids, films, foams, sponges, and micro/nanofibers have been formulated, and among them, the electrospun nanofibrous mats received an increased interest from researchers due to the numerous advantages and their intrinsic properties. The drug-embedded nanofibers are the potential candidates for wound dressing application by virtue of: Superior surface area-to volume ratio, enormous porosity (can allow oxy-permeability) or reticular nano-porosity (can inhibit the microorganisms'adhesion), structural similitude to the skin extracellular matrix, and progressive electrospinning methodology, which promotes a prolonged drug release. The reason that we chose to review the formulation of electrospun nanofibers based on polysaccharides as dressings useful in wound healing was based on the ever-growing research in this field, research that highlighted many advantages of the nanofibrillary network, but also a marked versatility in terms of numerous active substances that can be incorporated for rapid and infection-free tissue regeneration. In this review, we have extensively discussed the recent advancements performed on electrospun nanofibers (eNFs) formulation methodology as wound dressings, and we focused as well on the entrapment of different active biomolecules that have been incorporated on polysaccharides-based nanofibers, highlighting those bioagents capable of improving the healing process. In addition, in vivo tests performed to support their increased efficacy were also listed, and the advantages of the polysaccharide nanofiber-based wound dressings compared to the traditional ones were emphasized.

Encapsulation of tangeretin in PVA/PAA crosslinking electrospun fibers by emulsion-electrospinning: Morphology characterization, slow-release, and antioxidant activity assessment

In this work, water-resistant poly (vinyl alcohol) (PVA)/poly (acrylic acid) (PAA) electrospun fibers encapsulating tangeretin (Tan) were fabricated by emulsion-electrospinning. To optimize the electrospinning condition, the size and morphology of electrospun fibers were characterized by dynamic light scattering (DLS), optical light microscope, fluorescence microscopy, and scanning electron microscopy (SEM), respectively. The optimized initial concentration of PVA/PAA was 10% (w/w) with a mass ratio of 3:7. The time and temperature of optimized thermal crosslinking treatment were 2 h and 145 °C, respectively. The results of XRD and SEM showed that the Tan was successfully incorporated into smooth PVA/PAA electrospun fibers and those fibers possessed nano-diameter size and high porosity. The encapsulation of Tan had no significant impact on the antioxidant activity of PVA/PAA/Tan crosslinking electrospun fibers. The in vitro release test showed the PVA/PAA/Tan crosslinking electrospun fibers achieved durable release profiles and lower burst release rates than that from the pure Tan emulsion. Based on these results, it is concluded that PVA/PAA/Tan crosslinking electrospun fibers prepared by emulsion-electrospinning serve as a promising technique in the fields of water-insoluble drug delivery and slow-release.

Emerging Nano/Micro-Structured Degradable Polymeric Meshes for Pelvic Floor Reconstruction

Pelvic organ prolapse (POP) is a hidden women's health disorder that impacts 1 in 4 women across all age groups. Surgical intervention has been the only treatment option, often involving non-degradable meshes, with variable results. However, recent reports have highlighted the adverse effects of meshes in the long term, which involve unacceptable rates of erosion, chronic infection and severe pain related to mesh shrinkage. Therefore, there is an urgent unmet need to fabricate of new class of biocompatible meshes for the treatment of POP. This review focuses on the causes for the downfall of commercial meshes, and discusses the use of emerging technologies such as electrospinning and 3D printing to design new meshes. Furthermore, we discuss the impact and advantage of nano-/microstructured alternative meshes over commercial meshes with respect to their tissue integration performance. Considering the key challenges of current meshes, we discuss the potential of cell-based tissue engineering strategies to augment the new class of meshes to improve biocompatibility and immunomodulation. Finally, this review highlights the future direction in designing the new class of mesh to overcome the hurdles of foreign body rejection faced by the traditional meshes, in order to have safe and effective treatment for women in the long term.

Chitosan/poly(ε-caprolactone)-block-poly(ethylene glycol) copolymer electrospun membrane for the adsorption of dyes

The CS/PCL-(b-PEG) nanofibers with controllable core to shell ratio were fabricated as an adsorbent for dye adsorption.