Ultrafast microwave assisted development of magnetic carbon microtube from cotton waste for wastewater treatment

Novel pretreatment with hydrogen peroxide enhanced microwave biochar for heavy metals adsorption: Characterization and adsorption performance

Hydrogen peroxide (HP) was used to pretreat wheat straw (WS) for microwave biochar production at 100-600 W, the physicochemical properties of pretreated WS and biochar products as well as heavy metals adsorption performance were investigated. Results showed that HP enhanced specific surface area (SSA) and pore volume (PV) of WS, and the largest SSA (190.35 m2 g-1) and PV (0.1493 cm3 g-1) of biochar were obtained at microwave powers of 600 W (HPWS600) and 500 W (HPWS500), respectively. HPWS500 showed maximum adsorption capacities, which were 57.56, 190.21, and 65.16 mg g-1 for Cd2+, Pb2+, and Cu2+, respectively. Solution pH values and cation concentrations exhibited significant effects on adsorption capacities of biochar. The pseudo-second-order kinetic and Langmuir isotherm models fitted better for metal adsorption process. The FTIR results suggested that chemisorption mechanisms including precipitation with carbonate and complexation with oxygen-containing functional groups might be predominant adsorption mechanisms. These results suggest that HP pretreatment has excellent potential for biochar production.

Radially aligned hierarchical N-doped porous carbon beads derived from oil-sand asphaltene for long-life water filtration and wastewater treatment

The application of waste-derived highly efficient adsorbent for organic pollutants removal from water and wastewater is presented. Highly porous carbon beads with radially aligned macrochannels were prepared from asphaltene. Well-ordered inwardly aligned macrovoids favored solute diffusion and maximized the liquid accommodation capacity. A further N-doping could modulate the sorbent hydrophilicity leading to an outstanding absorption performance for a range of organic solvents and oily chemicals. N-doped carbon beads were effective sorbents of lopinavir (LNV) and ritonavir (RNV) from water and wastewater. The process of sorption was fast, and the highest removal was noted for RNV than LPV. N-doping favored LNV and RNV adsorption due to the increased porous structure of N-doped asphaltene beads. The chemisorption of both LPV and RTV was a rate-limiting step. The presence of co-pollutants in treated wastewater enhanced LPV and RNV removal and an up to 470 % increase was noted. The presence of LPV or RTV in distilled water was not toxic to Aliivibrio fischeri or even can stimulate their growth. However, after the adsorption process, the solution of RTV reduced its toxicity significantly and the final solution was not toxic. The opposite effect was noted for LPV. Given the repeatability, high removal performance, and cost-effectiveness of the asphaltene-based carbon microtubes when compared to other well-known sorbents such as carbon nanotubes, they demonstrated great potential as a low-cost and effective agent for long-life water filtration and wastewater treatment.

Sustainability trends and gaps in the textile, apparel and fashion industries

Textile, apparel, and fashion (TAF) industries contribute significantly to global environmental pollution at every point of the supply chain. Clothing manufacturing and transportation produce a large volume of waste and high greenhouse gas emissions, often taking advantage of cheap labor in developing countries. As a result, stakeholders are becoming more aware of the effect of the textile, apparel, and fashion industries on the climate and human rights, thus pushing businesses to mitigate their environmental damage. This paper offers a systematic literature review of sustainability trends in the TAF industries in the last 20 years. Bibliometric tools are also used to support the content analysis of the papers. The findings reveal three primary research areas in the TAF context: consumers' behaviour towards sustainable clothing, circular economy initiatives, and sustainability challenges across the whole supply chain. As a result, this study highlights literature gaps and provides future research suggestions for each identified research cluster. In addition, drivers and barriers to implementing corporate social responsibility and circular economy practices are identified. Consequently, this study will help researchers and academicians work in this area to identify unexplored sub-fields, which reflect some potential investigation areas for expanding scientific literature on the topic. Finally, this study supports practitioners and managers in exploring the main research themes addressed in the scientific field, providing knowledge to improve and align business models with current sustainability trends.

Biopolymer - A sustainable and efficacious material system for effluent removal

Undesired discharge of various effluents directly into the aquatic ecosystem can adversely affect water quality, endangering aquatic and terrestrial flora and fauna. Therefore, the conceptual design and fabrication of a sustainable system for alleviating the harmful toxins that are discharged into the atmosphere and water bodies using a green sustainable approach is a fundamental standpoint. Adsorptive removal of toxins (∼99% removal efficacy) is one of the most attractive and facile approaches for cleaner technologies that remediate the environmental impacts and provide a safe operating space. Recently, the introduction of biopolymers for the adsorptive abstraction of toxins from water has received considerable attention due to their eclectic accessibility, biodegradability, biocompatibility, non-toxicity, and enhanced removal efficacy (∼ 80-90% for electrospun fibers). This review summarizes the recent literature on the biosorption of various toxins by biopolymers and the possible interaction between the adsorbent and adsorbate, providing an in-depth perspective of the adsorption mechanism. Most of the observed results are explained in terms of (1) biopolymers classification and application, (2) toxicity of various effluents, (3) biopolymers in wastewater treatment and their removal mechanism, and (4) regeneration, reuse, and biodegradation of the adsorbent biopolymer.

Sustainable synthesis of rose flower-like magnetic biochar from tea waste for environmental applications

Introduction

Biochar utilization for adsorption seems to be the most cost-effective, easy/fast approach for pollutants removal from water and wastewater. Due to the high adsorption properties, magnetic biochar proved to be efficient in the sorption of heavy metals and nutrients. Although there are several studies on development of magnetic biochars, there is a lack of research on development of high-performance magnetic biochar from food waste for removal applications.

Objectives

This study aimed at preparing new classes of magnetic biochar derived from tea waste (TBC) for removal of heavy metals (Ni²⁺, Co²⁺), and nutrients (NH₄⁺ and PO₄³⁻) from water and effective fertilizer (source of NH₄⁺ and PO₄³⁻).

Methods

Standard carbonization process and ultrafast microwave have been used for fabrication of TBCs. The removal of nickel, cobalt as the representatives of heavy metals, and over-enriched nutrients (NH₄⁺ and PO₄³⁻) from water were tested and the removal kinetics, mechanism, and the effect of pH, dissolved organic matter and ionic strength were studied. Simultaneously, possible fertilizing effect of TBC for controlled release of nutrients (NH₄⁺ and PO₄³⁻) in soil was investigated.

Results

Up to 147.84 mg g⁻¹ of Ni²⁺ and 160.00 mg g⁻¹ of Co²⁺ were adsorbed onto tested biochars. The process of co-adsorption was also efficient (at least 131.68 mg g⁻¹ of Co²⁺ and 160.00 mg g⁻¹ of Ni²⁺). The highest adsorbed amount of NH₄⁺ was 49.43 mg g⁻¹, and the highest amount of PO₄³⁻ was 112.61 mg g⁻¹. The increase of the solution ionic strength and the presence of natural organic matter affected both the amount of adsorbed Ni²⁺+Co²⁺ and the reaction mechanism.

Conclusions

The results revealed that magnetic nanoparticle impregnated onto tea biochar, can be a very promising alternative for wastewater treatment especially considering removal of heavy metals and nutrients and slow-release fertilizer to improve the composition of soil elements.

Facemask Global Challenges: The Case of Effective Synthesis, Utilization, and Environmental Sustainability

Coronavirus disease (COVID-19), caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has caused a rapidly spreading pandemic and is severely threatening public health globally. The human-to-human transmission route of SARS-CoV-2 is now well established. The reported clinical observations and symptoms of this infection in humans appear in the range between being asymptomatic and severe pneumonia. The virus can be transmitted through aerosols and droplets that are released into the air by a carrier, especially when the person coughs, sneezes, or talks forcefully in a closed environment. As the disease progresses, the use and handling of contaminated personal protective equipment and facemasks have become major issues with significant environmental risks. Therefore, providing an effective method for treating used/contaminated facemasks is crucial. In this paper, we review the environmental challenges and risks associated with the surge in facemask production. We also discuss facemasks and their materials as sources of microplastics and how disposal procedures can potentially lead to the contamination of water resources. We herein review the potential of developing nanomaterial-based antiviral and self-cleaning facemasks. This review discusses these challenges and concludes that the use of sustainable and alternative facemask materials is a promising and viable solution. In this context, it has become essential to address the emerging challenges by developing a new class of facemasks that are effective against the virus, while being biodegradable and sustainable. This paper represents the potentials of natural and/or biodegradable polymers for manufacturing facemasks, such as wood-based polymers, chitosan, and other biodegradable synthetic polymers for achieving sustainability goals during and after pandemics.

Fight against COVID-19: The case of antiviral surfaces

The COVID-19 pandemic is the largest global public health outbreak in the 21st century so far. Based on World Health Organization reports, the main source of SARS-CoV-2 infection is transmission of droplets released when an infected person coughs, sneezes, or exhales. Viral particles can remain in the air and on the surfaces for a long time. These droplets are too heavy to float in air and rapidly fall down onto the surfaces. To minimize the risk of the infection, entire surrounding environment should be disinfected or neutralized regularly. Development of the antiviral coating for the surface of objects that are frequently used by the public could be a practical route to prevent the spread of the viral particles and inactivation of the transmission of the viruses. In this short review, the design of the antiviral coating to combat the spread of different viruses has been discussed and the technological attempts for minimizing the coronavirus outbreak have been highlighted.