Influence of the electric field on a bio-mimetic film supported on a gold electrode

Sum-frequency vibrational spectroscopy, a tutorial: Applications for the study of lipid membrane structure and dynamics

Planar supported lipid bilayers (PSLBs) are an ideal model for the study of lipid membrane structures and dynamics when using sum-frequency vibrational spectroscopy (SFVS). In this paper, we describe the construction of asymmetric PSLBs and the basic SFVS theory needed to understand and make measurements on these membranes. Several examples are presented, including the determination of phospholipid orientation and measuring phospholipid transmembrane translocation (flip-flop).

Adsorption Behavior of the Coenzyme NADH at the Carbon/Electrolyte Interface Determined by Neutron Reflectometry

The adsorption behavior of β-nicotinamide adenine dinucleotide (NADH) at the carbon/electrolyte interface has been studied using a combination of neutron reflectometry (NR) and solution depletion isotherms. Coupling the NR technique with an electrochemical cell allowed in situ observation of the reversible adsorption and desorption of the molecule at the electrode surface over a range of applied potentials. The overall surface coverage was low (30-50%), suggesting adsorption only at specific defect sites on the surface. Isotherms conducted over a range of temperatures were used to extract thermodynamic parameters, which implied strong physisorption via electrostatic interactions. In addition, changes in the outermost layer of the carbon electrode were observed as the applied potential was varied, which were confirmed with ex situ X-ray reflectivity measurements (XRR). X-ray photoelectron spectroscopy (XPS) measurements of the carbon surface demonstrated the majority of carbon atoms were in an sp² state.

Effect of Molecular Structure on Electrochemical Phase Behavior of Phospholipid Bilayers on Au(111)

Lipid bilayers form the basis of biological cell membranes, selective and responsive barriers vital to the function of the cell. The structure and function of the bilayer are controlled by interactions between the constituent molecules and so vary with the composition of the membrane. These interactions also influence how a membrane behaves in the presence of electric fields they frequently experience in nature. In this study, we characterize the electrochemical phase behavior of dipalmitoylphosphatidylcholine (DPPC), a glycerophospholipid prevalent in nature and often used in model systems and healthcare applications. DPPC bilayers were formed on Au(111) electrodes using Langmuir-Blodgett and Langmuir-Schaefer deposition and studied with electrochemical methods, atomic force microscopy (AFM) and in situ polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS). The coverage of the substrate determined with AFM is in accord with that estimated from differential capacitance measurements, and the bilayer thickness is slightly higher than for bilayers of the similar but shorter-chained lipid, dimyristoylphosphatidylcholine (DMPC). DPPC bilayers exhibit similar electrochemical response to DMPC bilayers, but the organization of molecules differs, particularly at negative charge densities. Infrared spectra show that DPPC chains tilt as the charge density on the metal is increased in the negative direction, but, unlike in DMPC, the chains then return to their original tilt angle at the most negative potentials. The onset of the increase in the chain tilt angle coincides with a decrease in solvation around the ester carbonyl groups, and the conformation around the acyl chain linkage differs from that in DMPC. We interpret the differences in behavior between bilayers formed from these structurally similar lipids in terms of stronger dispersion forces between DPPC chains and conclude that relatively subtle changes in molecular structure may have a significant impact on a membrane's response to its environment.

A quantitative determination of lipid bilayer deposition efficiency using AFM

The efficacy of a number of different methods for depositing a dimyristoylphosphatidylcholine (DMPC) lipid bilayer or DMPC–cholesterol (3 : 1) mixed bilayer onto a silicon substrate has been investigated in a quantitative manner using atomic force microscopy (AFM) image analysis to extract surface coverage. Complementary AFM-IR measurements were used to confirm the presence of the lipids. For the Langmuir–Blodgett/Schaefer deposition method at temperatures below the chain-melting transition temperature (T_m), a large number of bilayer defects resulted when DMPC was deposited from a water subphase. Addition of calcium ions to the trough led to smaller, more frequent defects, whereas addition of cholesterol to the lipid mixture led to a vast improvement in bilayer coverage. Poor coverage was achieved for deposition at temperatures above T_m. Formation of the deposited bilayer from vesicle fusion proved a more reliable method for all systems, with formation of near-complete bilayers within 60 seconds at temperatures above T_m, although this method led to a higher probability of multilayer formation and rougher bilayer surfaces.

The efficacy of different methods for depositing a DMPC or mixed DMPC–cholesterol (3 : 1) lipid bilayer onto a silicon substrate has been investigated in a quantitative manner using atomic force microscopy image analysis to extract surface coverage.

Impact of Electric Fields on the Nanoscale Behavior of Lipid Monolayers at the Surface of Graphite in Solution

The nanoscale organization and dynamics of lipid molecules in self-assembled membranes is central to the biological function of cells and in the technological development of synthetic lipid structures as well as in devices such as biosensors. Here, we explore the nanoscale molecular arrangement and dynamics of lipids assembled in monolayers at the surface of highly ordered pyrolytic graphite (HOPG), in different ionic solutions, and under electrical potentials. Using a combination of atomic force microscopy and fluorescence recovery after photobleaching, we show that HOPG is able to support fully formed and fluid lipid membranes, but mesoscale order and corrugations can be observed depending on the type of the lipid considered (1,2-dioleoyl- sn-glycero-3-phosphocholine, 1,2-dioleoyl- sn-glycero-3-phospho-l-serine (DOPS), and 1,2-dioleoyl-3-trimethylammoniumpropane) and the ion present (Na⁺, Ca²⁺, Cl^-). Interfacial solvation forces and ion-specific effects dominate over the electrostatic changes induced by moderate electric fields (±1.0 V vs Ag/AgCl reference electrode) with particularly marked effects in the presence of calcium, and for DOPS. Our results provide insights into the interplay between the molecular, ionic, and electrostatic interactions and the formation of dynamical ordered structures in fluid lipid membranes.

Mapping the ionic fingerprints of molecular monolayers

Molecular dynamics simulations support a self-assembled monolayer specific energy barrier to solution-phase ions that once surmounted, the entrapped ions support a film embedded ionic capacitance and non-faradaic relaxation (mapping through electrochemical capacitance measurements). The associated capacitance can be assigned as a particular case of general electrochemical capacitance.

Mobile lipid bilayers on gold surfaces through structure-induced lipid vesicle rupture

Forming fluid supported lipid bilayers (SLBs) on a gold surface can enable various lipid-membrane-associated biomolecular interactions to be investigated by several surface sensing techniques, such as surface plasmon resonance and scanning tunneling microscopy. However, forming fluid SLBs on a gold surface through lipid vesicle deposition continues to pose a challenge. In this study, we constructed nanograting structures on a gold surface to induce lipid vesicle rupture for forming a mobile layer of SLBs. Observations based on fluorescence recovery after photobleaching showed that SLBs on the prepared grating supports had some fluidity, while SLBs on the planar support had no fluidity. The anisotropic fluorescence intensity recovery shape changes observed in the SLBs on the grating support suggested that a second layer of SLBs partially formed on top of the first layer in contact with the gold surface and extended along the grating structure. Comparisons of the relative amounts of second bilayer and the fluorescence recovery fractions on supports with various grating edge densities suggested that the second layer formed at the edge regions and that the coverage ratio was directly proportional to the grating edge density. All of these results showed that the grating edges could serve as vesicle-rupture-inducing sites for the formation of a mobile second SLB on a gold surface. The formation of the second layer of SLBs at the edge regions but not in the flat regions enabled us to determine the second layer locations and provided us with an opportunity to pattern mobile lipid bilayers on gold surfaces by controlling the edge locations.

Analysis of biosurfaces by neutron reflectometry: from simple to complex interfaces

Because of its high sensitivity for light elements and the scattering contrast manipulation via isotopic substitutions, neutron reflectometry (NR) is an excellent tool for studying the structure of soft-condensed material. These materials include model biophysical systems as well as in situ living tissue at the solid-liquid interface. The penetrability of neutrons makes NR suitable for probing thin films with thicknesses of 5-5000 Å at various buried, for example, solid-liquid, interfaces [J. Daillant and A. Gibaud, Lect. Notes Phys. 770, 133 (2009); G. Fragneto-Cusani, J. Phys.: Condens. Matter 13, 4973 (2001); J. Penfold, Curr. Opin. Colloid Interface Sci. 7, 139 (2002)]. Over the past two decades, NR has evolved to become a key tool in the characterization of biological and biomimetic thin films. In the current report, the authors would like to highlight some of our recent accomplishments in utilizing NR to study highly complex systems, including in-situ experiments. Such studies will result in a much better understanding of complex biological problems, have significant medical impact by suggesting innovative treatment, and advance the development of highly functionalized biomimetic materials.

In situ PM-IRRAS of a glassy carbon electrode/deep eutectic solvent interface

Firstin situPM-IRRAS studies of a carbon electrode/deep eutectic solvent interface show ad- and desorption of electrolyte components.

Direct characterization of fluid lipid assemblies on mercury in electric fields

Phospholipid monolayers on mercury (Hg) surfaces have received substantial and extensive scientific interest not only because of their use as a biomembrane model but also for their application as a successful toxicity-sensing element. The monolayers show characteristic and very reproducible phase transitions manifest as consecutive voltammetric peaks in response to applied transverse electric fields. Unfortunately, apart from the results of simulation studies, there is a lack of data on the lipid phase structures to help interpret these voltammetric peaks. In this paper we report on the direct measurement of the structural changes underlying the phase transitions of phospholipid layers of dioleoyl phosphatidylcholine (DOPC) at electrified Hg surfaces using atomic force microscopy force-distance techniques. These direct measurements enable a description of the following structural changes in fluid lipid assemblies on a liquid electrode within an increasing transverse electric field. At about -1.0 V (vs Ag/AgCl) a field-facilitated ingress of ions and water into the monolayer results in a phase transition to a structured 2D emulsion. This is followed by a further phase transition at more negative potentials involving the readsorption of bilayer patches. At stronger values of field the bilayer patches form semivesicles, which subsequently collapse to form a monolayer of uncertain composition at very negative potentials. The observation that a monolayer on Hg converts to a bilayer by increasing the applied potential has allowed techniques to be developed for preparing and characterizing a near-continuous DOPC bilayer on Hg in an applied potential window within -1.0 and -1.4 V (vs Ag/AgCl).

Neutron scattering techniques and applications in structural biology

Neutron scattering is exquisitely sensitive to the position, concentration, and dynamics of hydrogen atoms in materials and is a powerful tool for the characterization of structure-function and interfacial relationships in biological systems. Modern neutron scattering facilities offer access to a sophisticated, nondestructive suite of instruments for biophysical characterization that provides spatial and dynamic information spanning from Ångstroms to microns and from picoseconds to microseconds, respectively. Applications in structural biology range from the atomic-resolution analysis of individual hydrogen atoms in enzymes through to meso- and macro-scale analysis of complex biological structures, membranes, and assemblies. The large difference in neutron scattering length between hydrogen and deuterium allows contrast variation experiments to be performed and enables H/D isotopic labeling to be used for selective and systematic analysis of the local structure, dynamics, and interactions of multi-component systems. This overview describes the available techniques and summarizes their practical application to the study of biomolecular systems.

Effect of headgroup on the physicochemical properties of phospholipid bilayers in electric fields: size matters

The effect of molecular structure on ensemble structure of phospholipid films has been investigated. Bilayers of dimyristoyl phosphatidylethanolamine (DMPE) were prepared on Au(111) electrodes using Langmuir-Blodgett and Langmuir-Schaeffer deposition. Capacitance and charge density measurements were used to investigate the adsorption behavior and barrier properties of the lipid bilayers. In situ polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) was employed to investigate the organization of the molecules within the bilayer. DMPE bilayers exhibit lower capacitance than bilayers formed from the related lipid, dimyristoyl phosphatidylcholine (DMPC). The infrared data show that these results can be explained by structural differences between the bilayers formed from each molecule. DMPE organizes into bilayers with hydrocarbon chains tilted at a smaller angle to the surface normal, which results in a thicker film. The hydrocarbon chains contain few conformational defects. Spectra in the carbonyl and phosphate stretching mode regions indicate low solvent content of DMPE films. Both of these effects combine to produce films with lower capacitance and enhanced barrier properties. The results are explained in terms of the differences in structure between the constituent molecules.

Atomic force microscopy studies of a floating-bilayer lipid membrane on a Au(111) surface modified with a hydrophilic monolayer

The surface of a gold electrode was functionalized with a hydrophilic monolayer of 1-thio-β-D-glucose formed by spontaneous self-assembly. The Langmuir-Blodgett/Langmuir-Schaefer (LB/LS) method was then used to assemble a bilayer onto the modified Au(111) surface. The bilayer lipid membrane (BLM) was separated from the Au(111) electrode surface by incorporating the monosialoganglioside GM1 into the inner leaflet of a bilayer composed of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and cholesterol. To make the inner leaflet, monolayers of GM1/DMPC/cholesterol with mole ratios of 1:6:3, 2:5:3, and 3:4:3 were used. The outer leaflet was composed of a 7:3 mole ratio of DMPC/cholesterol. Because of the amphiphilic properties of GM1, the hydrophobic acyl chains were incorporated into the BLM, whereas the large hydrophilic carbohydrate headgroups were physically adsorbed to the Au(111) electrode surface, creating a "floating" BLM (fBLM). This model contained a water-rich reservoir between the BLM and the gold surface. In addition, because of the bilayer being physically adsorbed onto the support, the fluidity of the BLM was maintained. The compression isotherms were measured at the air/water interface to determine the phase behavior and optimal transfer conditions. The images acquired using atomic force microscopy (AFM) and the force-distance measurements showed that the structure of the fBLM evolved with increasing GM1 content from 10 to 30 mol %, undergoing a transition from a corrugated to a homogeneous phase. This change was associated with a significant increase in bilayer thickness (from ∼5.3 to 7.3 nm). The highest-quality fBLM was produced with 30 mol % GM1.

Building biomimetic membrane at a gold electrode surface

This article describes efforts to build a model biological membrane at a surface of a gold electrode. In this architecture, the membrane may be exposed to static electric fields on the order of 10(7) to 10(8) V m(-1). These fields are comparable in magnitude to the static electric field acting on a natural biological membrane. The field may be conveniently used to manipulate organic molecules within the membrane. By turning a knob on the control instrument one can deposit or lift the membrane from the gold surface. Electrochemical techniques can be used to control the physical state of the film while the infrared reflection absorption spectroscopy (IRRAS), surface imaging by STM and AFM and neutron scattering techniques can be employed to study conformational changes of organic molecules and their ordering within the membrane. This is shown on examples of membranes built of a simple zwitterionic phospholipid such as 1,2-dimyristoyl-sn-glycero-3-phosphatidylcholine (DMPC) and a mixed membrane composed of DMPC and cholesterol. The results illustrate the tremendous effect of cholesterol on the membrane structure. Two methods of membrane deposition at the electrode surface, namely by unilamellar vesicles fusion and using the Langmuir-Blodgett technique, are compared. Applications of these model systems to study interactions of small antibiotic peptides with lipids are discussed.

Influence of an electric field on oriented films of DMPC/gramicidin bilayers: a circular dichroism study

A film of oriented bilayers containing a mixture of gramicidin and dimyristoylphosphatidylcholine (DMPC) has been deposited on a fused-silica window coated with a 10 nm thick gold layer. The thin layer of gold allows the application of an electric potential across the film and the study of its influence on the structure and integrity of the bilayers. Electrochemical measurements, ellipsometry, and far-UV circular dichroism (CD) were employed to characterize the properties of the film of bilayers as a function of the potential applied to the gold electrode. For potentials across the film that are within the range approximately +300 to -150 mV the oriented film of bilayers is stable, and no change in the CD spectra of gramicidin molecule is observed. At more negative potentials, an increase in the film thickness and water content measured by ellipsometry indicated that the film swells and incorporates water, which causes a change in the circular dichroism spectrum of gramicidin molecules in the film. This transformation was interpreted as a change in the average orientation of gramicidin molecules within the film due to a decrease in the ordering of the molecules upon swelling.

AFM studies of the effect of temperature and electric field on the structure of a DMPC-cholesterol bilayer supported on a Au(111) electrode surface

Atomic force microscopy (AFM) was used to characterize a phospholipid bilayer composed of 70 mol % 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 30 mol % cholesterol, at a Au(111) electrode surface. Results indicate that addition of cholesterol relaxes membrane elastic stress, increases membrane thickness, and reduces defect density. The thickness and thermotropic properties of the mixed DMPC-cholesterol bilayer supported at the gold electrode surface are quite similar to the properties of the mixed membrane in unilamellar vesicles. The stability of the supported membrane at potentials negative to the potential of zero charge E(pzc) was investigated. This study demonstrates that the bilayer supported at the gold electrode surface is stable provided the applied potential (E - E(pzc)) is less than -0.3 V. At larger polarizations, swelling of the membrane is observed. Polarizations larger than -1 V cause electrodewetting of the bilayer from the gold surface. At these negative potentials, the bilayer remains in close proximity to the metal surface, separated from it by a approximately 2 nm thick layer of electrolyte.

New sources and instrumentation for neutrons in biology

Neutron radiation offers significant advantages for the study of biological molecular structure and dynamics. A broad and significant effort towards instrumental and methodological development to facilitate biology experiments at neutron sources worldwide is reviewed.

Electrochemical and PM-IRRAS a glycolipid-containing biomimetic membrane prepared using Langmuir-Blodgett/Langmuir-Schaefer deposition

Differential capacitance, chronocoulometry, and polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) measurements were used to characterize the structure and orientation of a DMPC + cholesterol + GM 1 (60:30:10 mol %) bilayer supported at a Au(111) electrode surface prepared using combined Langmuir-Blodgett/Langmuir-Schaefer (LB/LS) deposition. The electrochemical measurements indicate that the incorporation of ganglioside GM 1 into the membrane significantly improves the quality of the bilayer, reflected in the very low capacitance value of approximately 0.8 microF cm (-2). An analysis of the infrared data suggests that the incorporation of the glycolipid into the membrane changes both the orientation of the lipid acyl chains in the membrane and the hydration of the membrane, particularly with respect to the interfacial region of the lipids.

AFM studies of solid-supported lipid bilayers formed at a Au(111) electrode surface using vesicle fusion and a combination of Langmuir-Blodgett and Langmuir-Schaefer techniques

Atomic force microscopy (AFM) has been used to characterize the formation of a phospholipid bilayer composed of 1,2-dimyristyl-sn-glycero-3-phosphocholine (DMPC) at a Au(111) electrode surface. The bilayer was formed by one of two methods: fusion of lamellar vesicles or by the combination of Langmuir-Blodgett (LB) and Langmuir-Schaefer (LS) deposition. Results indicate that phospholipid vesicles rapidly adsorb and fuse to form a film at the electrode surface. The resulting film undergoes a very slow structural transformation until a characteristic corrugated phase is formed. Force-distance curve measurements reveal that the thickness of the corrugated phase is consistent with the thickness of a bilayer lipid membrane. The formation of the corrugated phase may be explained by considering the elastic properties of the film and taking into account spontaneous curvature induced by the asymmetric environment of the bilayer, in which one side faces the gold substrate and the other side faces the solution. The effect of temperature and electrode potential on the stability of the corrugated phase has also been described.

Biotin-containing phospholipid vesicle layer formed on self-assembled monolayer of a saccharide-terminated alkyl disulfide for surface plasmon resonance biosensing

We describe a technique to form a biotin-containing phospholipid vesicle layer on a self-assembled monolayer (SAM) deposited on a gold surface to immobilize biotinylated receptor proteins for a surface plasmon resonance (SPR) biosensor. The adsorption of vesicle of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) was examined by SPR on the SAMs of dithiobis(1-deoxy-glucitol-1-carbamoyl pentane) (DDGP), 11-mercaptoundecanoic acid, 11-mercaptoundecanol, 11-amino-1-undecanethiol, and 12-mercaptododecane, and it was found that the DOPC vesicle rapidly adsorbed on the DDGP SAM to achieve the highest coverage of the surface. By quartz crystal microbalance with dissipation monitoring (QCM-D), the DOPC layer formed on the DDGP SAM was shown to be a vesicle layer, in which intact DOPC vesicles physisorbed on the SAM surface. To immobilize a biotinylated receptor protein, one of three biotinylated phospholipids, 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine-N-(biotinyl) (biotin-DOPE), N-((6-(biotinoyl)amino)hexanoyl)-1,2-dihexadecanoyl-sn-glycero-3-phosphoethanolamine (biotin-X-DHPE) and N-(biotinoyl)-1,2-dihexadecanoyl-sn-glycero-3-phosphoethanolamine (biotin-DHPE), was mixed with DOPC to form a biotin-containing vesicle layer on the DDGP SAM. A comparative binding study of NeutrAvidin and the biotin-containing vesicle layers showed that the use of biotin-X-DHPE achieved the most rapid immobilization of NeutrAvidin on the vesicle layer at the highest surface density. Furthermore, biotinylated protein A, as a receptor protein, could be immobilized through NeutrAvidin on the vesicle layer containing DOPC and biotin-X-DHPE, and its reaction with immunoglobulin G, as an analyte, was successfully observed by SPR. The results demonstrate that the biotin-containing vesicle layer on the DDGP SAM must be a useful component for SPR biosensor surfaces.

Electrochemically controlled growth and positioning of suspended collagen membranes

Two independently recognized in vitro polymer aggregation variables, electric field and pH, can be used in concert to produce suspended membranes from solutions of type I collagen monomers, without need of a supporting substrate. A collagen network film can form at the alkaline-acidic pH interface created during the normal course of water electrolysis with parallel plate electrodes, and the anchoring location can be controlled by adjusting the bulk electrolyte pH. Electrosynthesized films remain intact upon drying and rehydration and function as ion-separation membranes even in submillimeter channels. This approach could benefit lab-on-a-chip technologies for the rational placement of membranes in microfluidic devices.

Biophysical effects of electric fields on membrane water interfaces: a mini review

Lipid-water interfaces are dielectric transition regions. Their local organizations are highly sophisticated. They are sensitive to electric field with dramatic consequences on the global membrane organization and function. The importance of using local values of parameters (e.g. dielectric constant) near water-solution interface due to hydration and different electrostatic effects is often neglected in the description of cellular functions. Structural changes in the lipid layer are induced by minute changes in the electric properties of the interface. They bring alterations in the structure and oligomerization of membrane proteins.

Potential-driven structural changes in Langmuir-Blodgett DMPC bilayers determined by in situ spectroelectrochemical PM IRRAS

Combined Langmuir-Blodgett vertical withdrawing and Langmuir-Schaefer horizontal touch (LB-LS) methods were employed to transfer DMPC bilayers onto a Au(111) electrode surface. Charge density measurements and photon polarization modulation infrared reflection absorption spectroscopy were employed to investigate electric field induced changes in the structure of the bilayer. The results show that the physical state and the molecular arrangement found in the monolayer at the air-water interface is to a large extent preserved in the bilayer formed by the LB-LS method. This approach provides an opportunity to produce supported bilayers with a well-designed architecture. The properties of the bilayer formed by the LB-LS method were compared to the properties of the bilayer produced by spontaneous fusion of unilamellar vesicles investigated in an earlier study (Bin, X.; Zawisza, I.; Lipkowski, J. Langmuir 2005, 21, 330-347). The tilt angles of the acyl chains are much smaller in the bilayer formed by the LB-LS method and are closer to the angles observed for vesicles and stacked hydrated bilayers. The tilt angles of the phosphate and choline groups are also smaller and are characteristic of an orientation in which the area per DMPC molecule is small. The electric field induced changes of these angles are also less pronounced in the bilayer formed by the LB-LS method. We have shown that these differences are a result of the higher packing density of the phospholipid molecules in the bilayer formed by the LB-LS method.

Acoustic microsensors—the challenge behind microgravimetry

Acoustic microsensors are commonly known as high-resolution mass-sensitive devices. This is a restricted view in many chemical and biosensor applications, especially in liquids. Sensitivity to non-gravimetric effects is a challenging feature of acoustic sensors. In this review we give an overview of recent developments in resonant sensors including micromachined devices and also list recent activity relating to the (bio)chemical interface of acoustic sensors. Major results from theoretical analysis of quartz crystal resonators, descriptive for all acoustic microsensors are summarized, and non-gravimetric contributions to the sensor signal from viscoelasticity and interfacial effects are discussed. We finally conclude with some future perspectives.

Structure of a gel phase lipid bilayer prepared by the Langmuir-Blodgett/Langmuir-Schaefer method characterized by sum-frequency vibrational spectroscopy

The structure of a planar supported lipid bilayer (PSLB) prepared by the Langmuir-Blodgett (LB)/Langmuir-Schaefer (LS) method was investigated by sum-frequency vibrational spectroscopy (SFVS). By using asymmetric lipid bilayers composed of selectively deuterated 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) lipids, the orientation of the fatty acid chains and phosphocholine headgroups has been determined independently for both leaflets of the bilayer. The alkyl chains of the lipids were found to be orientated approximately 13 degrees +/- 4 degrees from the surface normal for both leaflets. The lipid chains in both leaflets also contain some gauche content, which is consistent with previous NMR and FTIR studies of similar lipid systems. More importantly, the relative number of gauche defects does not seem to be influenced by the deposition method, LB versus LS. The headgroup orientation for the lipid film in contact with the silica support was determined to be 69 degrees +/- 3 degrees , whereas that in contact with the aqueous phase was 66 degrees +/- 4 degrees from the surface normal. The SFVS results indicate that the structure of the DSPC lipid film in contact with the solid support and the film adjacent to the aqueous phase are nearly identical in structure. These results suggesting the LB/LS deposition method do indeed produce symmetric lipid bilayers. These studies further add to the growing information on the efficacy of PSLBs as suitable models for biological membrane studies.

Non-gravimetric contributions to QCR sensor response

Quartz crystal resonator (QCR) sensors are commonly known as mass sensitive devices, usually called QCM (Quartz Crystal Microbalance). This constricted view should not be applied to biosensor applications. In many cases the sensor response is strongly influenced or even governed by non-gravimetric effects; the QCR sensor does not act as a microbalance. For better understanding of the sensor response as well as for sensor optimization a more general description of the sensor principle is required. The Transmission Line Model (TLM) is a powerful tool to describe the transduction scheme of QCR and other acoustic-wave based sensors. It is therefore applied to the analysis of the sensor behavior under several conditions, which can be expected in biochemical experiments. The generalization of acoustic parameters provides a concept to overcome some of the limiting assumptions of the present TLM.