Effects of lung surfactants on rifampicin release rate from monodisperse rifampicin-loaded PLGA microspheres

Pulmonary inhalation for disease treatment: Basic research and clinical translations

Pulmonary drug delivery has the advantages of being rapid, efficient, and well-targeted, with few systemic side effects. In addition, it is non-invasive and has good patient compliance, making it a highly promising drug delivery mode. However, there have been limited studies on drug delivery via pulmonary inhalation compared with oral and intravenous modes. This paper summarizes the basic research and clinical translation of pulmonary inhalation drug delivery for the treatment of diseases and provides insights into the latest advances in pulmonary drug delivery. The paper discusses the processing methods for pulmonary drug delivery, drug carriers (with a focus on various types of nanoparticles), delivery devices, and applications in pulmonary diseases and treatment of systemic diseases (e.g., COVID-19, inhaled vaccines, diagnosis of the diseases, and diabetes mellitus) with an updated summary of recent research advances. Furthermore, this paper describes the applications and recent progress in pulmonary drug delivery for lung diseases and expands the use of pulmonary drugs for other systemic diseases.

Formulation of Resveratrol-Loaded Polycaprolactone Inhalable Microspheres Using Tween 80 as an Emulsifier: Factorial Design and Optimization

Resveratrol (RSV) is a bioactive phytoconstituent that has potential applications in respiratory diseases. However, poor oral bioavailability is the major hurdle to its clinical use. In the present work, resveratrol-loaded polycaprolactone (PCL) inhalable microspheres (MSs) were formulated to improve their therapeutic potential. The inhalable microspheres were formulated using the emulsion-solvent evaporation method. In this research, inhalable resveratrol microspheres were prepared using Tween 80 in place of polyvinyl alcohol which formed insoluble lumps. A 3² factorial design was applied taking polymer (PCL) and emulsifier (Tween 80) as independent variables and drug loading (DL) and encapsulation efficiency (EE) as dependent variables. The DL and EE of the optimized formulation were found to be 30.6% and 63.84% respectively. The in vitro aerosolization study performed using the Anderson cascade impactor showed that the fine particle fraction (FPF) of optimized resveratrol polycaprolactone microspheres (RSV-PCL-MSs) blended with lactose, and RSV-PCL-MSs were significantly higher than those of the pure drugs. The MMAD_T (theoretical mass median aerodynamic diameter) of optimized RSV-PCL-MSs was found to be 3.25 ± 1.15. The particle size of microspheres was within the inhalable range, i.e., between 1 and 5 µm. The morphological analysis showed spherical-shaped particles with smooth surfaces. The in vitro release study showed sustained drug release from the microspheres for up to 12 h. The study concluded that resveratrol-loaded inhalable microspheres may be an efficient delivery system to treat COPD.

Application of PLGA as a Biodegradable and Biocompatible Polymer for Pulmonary Delivery of Drugs

Pulmonary administration of biodegradable polymeric formulation is beneficial in the treatment of various respiratory diseases. For respiratory delivery, the polymer must be non-toxic, biodegradable, biocompatible, and stable. Poly D, L-lactic-co-glycolic acid (PLGA) is a widely used polymer for inhalable formulations because of its attractive mechanical and processing characteristics which give great opportunities to pharmaceutical industries to formulate novel inhalable products. PLGA has many pharmaceutical applications and its biocompatible nature produces non-toxic degradation products. The degradation of PLGA takes place through the non-enzymatic hydrolytic breakdown of ester bonds to produce free lactic acid and glycolic acid. The biodegradation products of PLGA are eliminated in the form of carbon dioxide (CO₂) and water (H₂O) by the Krebs cycle. The biocompatible properties of PLGA are investigated in various in vivo and in vitro studies. The high structural integrity of PLGA particles provides better stability, excellent drug loading, and sustained drug release. This review provides detailed information about PLGA as an inhalable grade polymer, its synthesis, advantages, physicochemical properties, biodegradability, and biocompatible characteristics. The important formulation aspects that must be considered during the manufacturing of inhalable PLGA formulations and the toxicity of PLGA in the lungs are also discussed in this paper. Additionally, a thorough overview is given on the application of PLGA as a particulate carrier in the treatment of major respiratory diseases, such as cystic fibrosis, lung cancer, tuberculosis, asthma, and pulmonary hypertension.

Dry powder inhalers of antitubercular drugs

Despite advancements in the medical and pharmaceutical fields, tuberculosis remains a major health problem globally. Patients do not widely accept the conventional approach to treating tuberculosis (TB) due to prolonged treatment periods with multiple high doses of drugs and associated side effects. A pulmonary route is a non-invasive approach to delivering drugs, hormones, nucleic acid, steroids, proteins, and peptides directly to the lungs, improving the efficacy of the treatment and consequently decreasing the adverse effect of the treatment. This route has been successfully developed for the treatment of various respiratory diseases such as asthma, chronic obstructive pulmonary disease (COPD), tuberculosis (TB), lung cancer, and other pulmonary infections. The major approaches of inhalation delivery systems include nebulizers, metered-dose inhalers (MDIs), and dry powder inhalers (DPIs). However, dry powder inhalers (DPIs) are more advantageous due to their stability and ability to deliver a high dose of the drug to the lungs. The present review analyzes the modern therapeutic approach of inhaled dry powders, with a special focus on novel drug delivery system (NDDS) based DPIs for the treatment of TB. The article also discussed the challenges of preparing inhalable dry powder formulations for the treatment of TB. The clinical development of inhalable anti-TB drugs is also reviewed.

Melatonin-based therapeutics for atherosclerotic lesions and beyond: Focusing on macrophage mitophagy

Atherosclerosis refers to a unique form of chronic proinflammatory anomaly of the vasculature, presented as rupture-prone or occlusive lesions in arteries. In advanced stages, atherosclerosis leads to the onset and development of multiple cardiovascular diseases with lethal consequences. Inflammatory cytokines in atherosclerotic lesions contribute to the exacerbation of atherosclerosis. Pharmacotherapies targeting dyslipidemia, hypercholesterolemia, and neutralizing inflammatory cytokines (TNF-α, IL-1β, IL-6, IL-17, and IL-12/23) have displayed proven promises although contradictory results. Moreover, adjuvants such as melatonin, a pluripotent agent with proven anti-inflammatory, anti-oxidative and neuroprotective properties, also display potentials in alleviating cytokine secretion in macrophages through mitophagy activation. Here, we share our perspectives on this concept and present melatonin-based therapeutics as a means to modulate mitophagy in macrophages and, thereby, ameliorate atherosclerosis.

Bioactive Betulin and PEG Based Polyanhydrides for Use in Drug Delivery Systems

In the course of this study, a series of novel, biodegradable polyanhydrides based on betulin disuccinate and dicarboxylic derivatives of poly(ethylene glycol) were prepared by two-step polycondensation. These copolymers can be used as carriers in drug delivery systems, in the form of microspheres. Betulin and its derivatives exhibit a broad spectrum of biological activity, including cytotoxic activity, which makes them promising substances for use as therapeutic agents. Microspheres that were prepared from betulin based polyanhydrides show promising properties for use in application in drug delivery systems, including inhalation systems. The obtained copolymers release the active substance-betulin disuccinate-as a result of hydrolysis under physiological conditions. The use of a poly(ethylene glycol) derivative as a co-monomer increases the solubility and bioavailability of the obtained compounds. Microspheres with diameters in the range of 0.5-25 µm were prepared by emulsion solvent evaporation method and their physicochemical and aerodynamic properties were analyzed. The morphological characteristics of the microspheres depended on the presence of poly(ethylene glycol) (PEG) segment within the structure of polyanhydrides. The porosity of the particles depended on the amount and molecular weight of the PEG used and also on the speed of homogenization. The most porous particles were obtained from polyanhydrides containing 20% wt. of PEG 600 by using a homogenization speed of 18,000 rpm.

Fumaryl diketopiperazine based effervescent microparticles to escape macrophage phagocytosis for enhanced treatment of pneumonia via pulmonary delivery

The treatment of pulmonary infections with antibiotics administered via pulmonary delivery provides for higher local therapeutic efficacy rather than through systemic administration. Pneumonia is globally considered a major cause of death due to a lack of proper medication. The treatment of pneumonia with inhalable antibiotics (such as azithromycin (AZM)) can provide a maximum pulmonary therapeutic effect without significant systemic side effects. Compared to non-effervescent microparticles, effervescent microparticles can provide an active driving force to release loaded antibiotics for subsequent distribution deep into the lung by virtue of its smaller size. In this study, N-fumaroylated diketopiperazine (FDKP) was used as a carrier to prepare effervescent inhalable microparticles loaded with AZM (AZM@FDKP-E-MPs). This effervescent dry powder was characterized for both in vitro and in vivo deposition in the lung and the results obtained showed significant improvement in lung deposition and anti-bacterial efficiency, suggesting a strong potential application for pneumonia treatment.

Interactions with the macrophages: An emerging targeted approach using novel drug delivery systems in respiratory diseases

Macrophages are considered as the most flexible cells of the hematopoietic system that are distributed in the tissues to act against pathogens and foreign particles. Macrophages are essential in maintaining homeostatic tissue processes, repair and immunity. Also, play important role in cytokine secretion and signal transduction of the infection so as to develop acquired immunity. Accounting to their involvement in pathogenesis, macrophages present a therapeutic target for the treatment of inflammatory respiratory diseases. This review focuses on novel drug delivery systems (NDDS) including nanoparticles, liposomes, dendrimers, microspheres etc that can target alveolar macrophage associated with inflammation, intracellular infection and lung cancer. The physiochemical properties and functional moieties of the NDDS attributes to enhanced macrophage targeting and uptake. The NDDS are promising for sustained drug delivery, reduced therapeutic dose, improved patient compliance and reduce drug toxicity. Further, the review also discuss about modified NDDS for specificity to the target and molecular targeting via anti-microbial peptides, kinases, NRF-2 and phosphodiesterase.

Nanomedicines as Drug Delivery Carriers of Anti-Tubercular Drugs: From Pathogenesis to Infection Control

In spite of advances in tuberculosis (TB) chemotherapy, TB is still airborne deadly disorder as a major issue of health concern worldwide today. Extensive researches have been focused to develop novel drug delivery systems to shorten the lengthy therapy approaches, prevention of relapses, reducing dose-related toxicities and to rectify technologically related drawbacks of anti-tubercular drugs. Moreover, the rapid emergence of drug resistance, poor patient compliance due to negative therapeutic outcomes and intracellular survival of Mycobacterium highlighted to develop carrier with optimum effectiveness of the anti-tubercular drugs. This could be achieved by targeting and concentrating the drug on the infection reservoir of Mycobacterium. In this article, we briefly compiled the general aspects of Mycobacterium pathogenesis, disease treatment along with progressive updates in novel drug delivery carrier system to enhance therapeutic effects of drug and the high level of patient compliance. Recently developed several vaccines might be shortly available as reported by WHO.

Challenges and innovations of drug delivery in older age

Both drug delivery performance and various age-related physical, mental and physiological changes can affect drug effectiveness and safety in elderly patients. The many drug delivery systems developed over the years include recent novel transdermal, nasal, pulmonary and orally disintegrating tablets that provide consistent, precise, timely and more targeted drug delivery. Certain drug delivery systems may be associated with suboptimal outcomes in the elderly because of the nature of drug present, a lack of appreciation of the impact of age-related changes in drug absorption, distribution and clearance, the limited availability of pharmacokinetic, safety and clinical data. Polypharmacy, patient morbidity and poor adherence can also contribute to sub-optimal drug delivery systems outcomes in the elderly. The development of drug delivery systems for the elderly is a poorly realised opportunity, with each system having specific advantages and limitations. A key challenge is to provide the innovation that best meets the specific physiological, psychological and multiple drug requirements of individual elderly patients.

Exploring inhalable polymeric dry powders for anti-tuberculosis drug delivery

The growing interest on polymeric delivery systems for pulmonary administration of drugs anticipates a more direct and efficient treatment of diseases such as tuberculosis (TB) that uses the pulmonary route as the natural route of infection. Polymeric microparticles or nano-in-microparticles offer target delivery of drugs to the lungs and the potential to control and sustain drug release within TB infected macrophages improving the efficiency of the anti-TB treatment and reducing side effects. In a dry powder form these inhalable delivery systems have increased stability and prolonged storage time without requiring refrigeration, besides being cost-effective and patient convenient. Thus, this review aims to compile the recent innovations of inhalable polymeric dry powder systems for the delivery of anti-TB drugs exploring the methods of production, aerodynamic characterization and the efficacy of targeted drug delivery systems using in vitro and in vivo models of the disease. Advanced knowledge and promising outcomes of these systems are anticipated to simplify and revolutionize the pulmonary drug delivery and to contribute towards more effective anti-TB treatments.

Critical physicochemical and biological attributes of nanoemulsions for pulmonary delivery of rifampicin by nebulization technique in tuberculosis treatment

The study investigated aerosolization, pulmonary inhalation, intracellular trafficking potential in macrophages and pharmacokinetics profiles of rifampicin-oleic acid first-generation nanoemulsion and its respective chitosan- and chitosan-folate conjugate-decorated second and third-generation nanoemulsions, delivered via nebulization technique. The nanoemulsions were prepared by conjugate synthesis and spontaneous emulsification techniques. They were subjected to physicochemical, drug release, aerosolization, inhalation, cell culture and pharmacokinetics analysis. The nanoemulsions had average droplet sizes of 40-60 nm, with narrow polydispersity indices. They exhibited desirable pH, surface tension, viscosity, refractive index, density and viscosity attributes for pulmonary rifampicin administration. All nanoemulsions demonstrated more than 95% aerosol output and inhalation efficiency greater than 75%. The aerosol output, aerosolized and inhaled fine particle fractions were primarily governed by the size and surface tension of nanoemulsions in an inverse relationship. The nanoemulsions were found to be safe with third-generation nanoemulsion exhibiting higher cell internalization potential, reduced plasma drug concentration, and higher lung drug content.

In Vitro-In Vivo Evaluation of Novel Co-spray Dried Rifampicin Phospholipid Lipospheres for Oral Delivery

The objective of this study comprises of developing novel co-spray dried rifampicin phospholipid lipospheres (SDRPL) to investigate its influence on rifampicin solubility and oral bioavailability. Solid-state techniques were employed to characterize the liposphere formulation. SDRPL solubility was determined in distilled water. BACTEC 460TB System was employed to evaluate SDRPL antimycobacterial activity. The oral bioavailability of the lipospheres was evaluated in Sprague Dawley rats. Lipospheres exhibited amorphous, smooth spherical morphology with a significant increase (p < 0.001) in solubility of SDRPL (2:1), 350.9 ± 23 versus 105.1 ± 12 μg/ml and SDRPL (1:1) 306.4 ± 20 versus 105.1 ± 12 μg/ml in comparison to rifampicin (RMP). SDRPL exhibited enhanced activity against Mycobacterium tuberculosis, H37Rv strain, with over twofolds less minimum inhibitory concentration (MIC) than the free drug. Lipospheres exhibited higher peak plasma concentration (109.92 ± 25 versus 54.31 ± 18 μg/ml), faster T _max (two versus four hours), and enhanced area under the curve (AUC_0-∞) (406.92 ± 18 versus 147.72 ± 15 μg h/L) in comparison to pure RMP. Thus, SDRPL represents a promising carrier system exhibiting enhanced antimycobacterial activity and oral bioavailability of rifampicin.

Nano- and micro-based inhaled drug delivery systems for targeting alveolar macrophages

INTRODUCTION

Macrophages are the most versatile cells in the hematopoietic system and are strategically distributed in tissues to fight pathogens or other foreign particles. In the lung, however, for intracellular infections such as tuberculosis, pneumonia and aspergillosis, bacteria and fungi utilize the alveolar macrophage as a breeding ground. This has become a challenge for the treatment of these infections, as most drugs do not effectively reach the macrophages at therapeutic levels. Alveolar macrophages also play an important role to initiative adaptive immunity toward combating inflammation and cancer in the lung.

AREAS COVERED

This review focuses on the development of micro- and nanotechnology-based drug delivery systems to target alveolar macrophages in association with intracellular infections, cancer and lung inflammation. Aspects of nanoparticle and micron-sized particle engineering through exploitation of particles' physicochemical characteristics such as particle size, surface charge and geometry of particles are discussed. In addition, the application of nanocarriers such as liposomes, polymeric nanoparticles and dendrimers are covered with respect to macrophage targeting.

EXPERT OPINION

Drug delivery targeted to alveolar macrophages in the lung is becoming a reality thanks to micro- and nanotechnology breakthrough. The literature review shows that regulation of physicochemical parameters of particles could be a recipe to enhance macrophage targeting and uptake. However, there is still a need to identify more target-specific receptors in order to facilitate drug targeting. Besides that, the toxicity of nanocarriers arising from prolonged residence in the lung should be taken into consideration during formulation.

Assessment of lactoferrin-conjugated solid lipid nanoparticles for efficient targeting to the lung

The aim of the present study was to develop a target oriented drug delivery system for the lungs. Lactoferrin (Lf)-coupled solid lipid nanoparticles (SLNs) bearing rifampicin was prepared by a solvent injection method. The prepared nanoparticles were characterized for shape, particle size, polydispersity and percentage drug entrapment. An optimized formulation was then studied for its in vivo performance in animals and to determine its targeting efficiency. It was observed that, upon coupling with Lf, the size of SLNs increased while the percent entrapment efficiency decreases. In in vitro release, determined by a dialysis technique, analysis showed that uncoupled SLNs exhibited higher drug release as compared to coupled SLNs. An in vivo biodistribution study shows 47.7 ±0.4 drug uptakes by the lungs, which was 3.05 times higher in comparison to uncoupled SLNs. These biodistribution studies are further supported by the fluorescence study that revealed enhanced uptake of Lf-coupled SLNs in the lung. From the presented results, it can be concluded that Lf-coupled SLNs enhanced drug uptake in the lung. Moreover, lactoferrin is an efficient molecule that can be used for targeting active agents directly to the lung.

Pulmonary drug delivery systems for tuberculosis treatment

Tuberculosis (TB) remains a major global health problem as it is the second leading cause of death from an infectious disease worldwide, after the human immunodeficiency virus (HIV). Conventional treatments fail either because of poor patient compliance to the drug regimen or due to the emergence of multidrug-resistant tuberculosis. The aim of this review is to give an update on the information available on tuberculosis, its pathogenesis and current antitubercular chemotherapies. Direct lung delivery of anti-TB drugs using pulmonary delivery systems is then reviewed since it appears as an interesting strategy to improve first and second line drugs. A particular focus is place on research performed on inhalable dry powder formulations of antitubercular drugs to target alveolar macrophages where the bacteria develop. Numerous studies show that anti-TB drugs can be incorporated into liposomes, microparticles or nanoparticles which can be delivered as dry powders to the deep lungs for instantaneous, targeted and/or controlled release. Treatments of infected animals show a significant reduction of the number of viable bacteria as well as a decrease in tissue damage. These new formulations appear as interesting alternatives to deliver directly drugs to the lungs and favor efficient TB treatment.

Biophysical activity of animal-derived exogenous surfactants mixed with rifampicin

Exogenous pulmonary surfactant is a potential delivery system for topical medications via the conducting airways. Due to the sensitivity to inactivation of surfactant, mutual interaction with the shipped drug should be evaluated. Little is known about the interactions between surfactant and antimicrobial drugs. The aim of the present study was to evaluate whether biophysical properties of animal-derived surfactants are modified by the bactericidal antibiotic rifampicin. An intracellular activity and a broad antimicrobiotic spectrum toward Gram-negative and Gram-positive bacteria make rifampicin an interesting substance against pulmonary infections. Curosurf® (porcine surfactant from minced lungs) and Survanta® (bovine surfactant extract) were diluted to 2.5-5.0 mg/ml of phospholipids in 0.9 % NaCl and rifampicin (RIF) was added at 1, 5, and 10 % (w/w). Minimum (γ(min)) and maximum (γ(max)) surface tension of a cyclically compressed bubble in the mixture was assessed with a pulsating bubble surfactometer. After 5 min, γ(min) of Survanta at a concentration of 3 mg/ml was significantly increased after addition of 5 and 10 % RIF (both p < 0.001). At 1 % RIF, the γ(min) of Survanta was ≈10 mN/m and this value was not significantly different to that of Survanta alone. The γ(min) of Curosurf at 3 mg/ml was increased with 10 % RIF (p < 0.001), but not with 1 and 5 %. At 5 mg/ml Survanta was inhibited by 10 % RIF (p < 0.05), while γ(min) of Curosurf was low (<5 mN/m) in all mixtures. In conclusion, Curosurf and Survanta interfere with RIF in a concentration-dependent manner. At the appropriate phospholipid concentration, especially porcine-derived surfactant is able to retain good surface activity when mixed with antibiotics.

Inhalable DNase I microparticles engineered with biologically active excipients

Highly viscous mucus poses a big challenge for the delivery of particulates carrying therapeutics to patients with cystic fibrosis. In this study, surface modifying DNase I loaded particles using different excipients to achieve better lung deposition, higher enzyme stability or better biological activity had been exploited. For the purpose, controlled release microparticles (MP) were prepared by co-spray drying DNase I with the polymer poly-lactic-co-glycolic acid (PLGA) and the biocompatible lipid surfactant 1,2-dipalmitoyl-Sn-phosphatidyl choline (DPPC) using various hydrophilic excipients. The effect of the included modifiers on the particle morphology, size, zeta potential as well as enzyme encapsulation efficiency, biological activity and release had been evaluated. Powder aerosolisation performance and particle phagocytosis by murine macrophages were also investigated. The results showed that more than 80% of enzyme activity was recovered after MP preparation and that selected surface modifiers greatly increased the enzyme encapsulation efficiency. The particle morphology was greatly modified altering in turn the powders inhalation indices where dextran, ovalbumin and chitosan hydrochloride increased considerably the respirable fraction compared to the normal hydrophilic carriers lactose and PVP. Despite of the improved aerosolisation caused by chitosan hydrochloride, yet retardation of chitosan coated particles in artificial mucus samples discouraged its application. On the other hand, dextran and polyanions enhanced DNase I effect in reducing cystic fibrosis mucus viscosity. DPPC proved good ability to reduce particles phagocytic uptake even in the presence of the selected adjuvants. The prepared MP systems were biocompatible with lung epithelial cells. To conclude, controlled release DNase I loaded PLGA-MP with high inhalation indices and enhanced mucolytic activity on CF sputum could be obtained by surface modifying the particles with PGA or dextran.

Pharmaceutical aerosols for the treatment and prevention of tuberculosis

Historically, pharmaceutical aerosols have been employed for the treatment of obstructive airway diseases, such as asthma and chronic obstructive pulmonary disease, but in the past decades their use has been expanded to treat lung infections associated with cystic fibrosis and other respiratory diseases. Tuberculosis (TB) is acquired after inhalation of aerosol droplets containing the bacilli from the cough of infected individuals. Even though TB affects other organs, the lungs are the primary site of infection, which makes the pulmonary route an ideal alternative route to administer vaccines or drug treatments. Optimization of formulations and delivery systems for anti-TB vaccines and drugs, as well as the proper selection of the animal model to evaluate those is of paramount importance if novel vaccines or drug treatments are to be successful. Pharmaceutical aerosols for patient use are generated from metered dose inhalers, nebulizers, and dry powder inhalers (DPIs). In addition to the advantages of providing more efficient delivery of the drug, low cost, and portability, pharmaceutical dry powder aerosols are more stable than inhalable liquid dosage forms and do not require refrigeration. Methods to manufacture dry powders in respirable sizes include micronization, spray drying, and other proprietary technologies. Inhalable dry powders are characterized in terms of their drug content, particle size, and dispersibility to ensure deposition in the appropriate lung region and effective aerosolization from the device. These methods will be illustrated as they were applied for the manufacture and characterization of powders containing anti-tubercular agents and vaccines for pulmonary administration. The influence of formulation, selection of animal model, method of aerosol generation, and administration on the efficacy demonstrated in a given study will be illustrated by the evaluation of pharmaceutical aerosols of anti-TB drugs and vaccines in guinea pigs by our group.

Preparation of sustained release rifampicin microparticles for inhalation

Objectives

The aim of this research was to develop a novel carrier-free dry powder formulation of rifampicin for inhalation with controlled-release properties.

Methods

Rifampicin dihydrate (RFDH) microcrystals were prepared by a polymorphic transformation of rifampicin. The prepared RFDH microcrystals were coated with poly (dl-lactide-co-glycolide) or poly (dl-lactide), using a spray-dryer equipped with two different types of three-fluid (3F) spray nozzles. The physicochemical and aerodynamic properties of the coated RFDH microcrystals were compared with those of conventional matrix microparticles.

Key findings

The coated RFDH powder, encapsulating 50% of rifampicin, was successfully prepared by simple in-situ coating methods using two different types of 3F nozzles and had mass median aerodynamic diameter values of 3.5–4.5 µm. The thin flaky morphology of RFDH powders, providing good aerosolization properties, was maintained after coating. The coated RFDH formulations showed relatively low initial rifampicin release, compared with the uncoated RFDH crystals, followed by slow rifampicin release (about 70%) over 8 h in phosphate-buffered saline media (pH 7.4). Significant chemical degradations were not observed from the crystalline-structured RFDH formulations, while the amorphous-structured matrix formulations showed chemical degradation in six months.

Conclusions

These polymer coated RFDH formulations may be a valuable alternative in the treatment of tuberculosis since the carrier-free formulation offers the benefit of delivering a maximum-potency formulation of the antibiotic directly to the site of infection, and long drug residence times may be achieved by the controlled release of the drug.

Macrophage-specific targeting of isoniazid through mannosylated gelatin microspheres

Active targeting of drug molecules can be achieved by effective attachment of suitable ligands to the surface of carriers. The present work was attempted to prepare mannosylated gelatin microspheres (m-GMs) so as to achieve targeted delivery of isoniazid (INH) to alveolar macrophages (AMs) and maintain its therapeutic concentration for prolonged period of time. Microspheres were prepared by emulsification solvent extraction method and evaluated for physicochemical characteristics, drug release, ex vivo drug uptake by AMs and pharmacokinetic characteristics. Fourier transform infrared spectroscopy and nuclear magnetic resonance spectral analysis confirmed that mannosylation took place through Schiff base formation between aldehyde and amino groups of mannose and gelatin, respectively. Prepared microspheres offered suitable physicochemical characteristics for their delivery to AMs. Their average size was about 4 μm and drug entrapment efficiency of 56% was achieved with them. Ex vivo uptake results indicated that in comparison to plain microspheres, m-GMs were selectively uptaken and were found to be associated with phago-lysosomal vesicles of AMs. Pharmacokinetic studies showed the formulation could maintain the therapeutic concentration of INH for prolonged period of time even with a reduced clinical dose. m-GMs were found to be stable in broncheo-alveolar lavage fluid. The study concluded that ligand decorated carriers could be a potential strategy to improve the therapeutic properties of INH.

Nanovesicle aerosols as surfactant therapy in lung injury

Acute lung injury causes inactivation of pulmonary surfactant due to leakage of albumin and other markers. Current surfactants are ineffective in this condition and are instilled intratracheally. Nanovesicles of 300 ± 50 nm composed of nonlamellar phospholipids were developed as pulmonary surfactant aerosols for therapy in acid-induced lung injury. A combination of dipalmitoyl phosphatidylcholine and dioleoyl phosphatidylethanolamine was used. The size and composition of the nanovesicles were optimized for an improved airway patency in the presence of albumin and serum. In an acid-induced lung injury model in mice, on treatment with nanovesicle aerosols at a dose of 200 mg/kg, the alveolar protein leakage decreased from 8.62 ± 0.97 μg/mL to 1.94 ± 0.74 μg/mL, whereas the airway patency of the bronchoalveolar lavage fluid increased from 0.6 ± 0.0% to 91.7 ± 1.05%. Nanovesicle aerosols of nonlamellar lipids improved the resistance of pulmonary surfactants to inhibition and were promising as a noninvasive aerosol therapy in acute lung injury.

FROM THE CLINICAL EDITOR

In acute lung injury, intrinsic surfactants are inactivated via albumin leakage and other mechanisms. Currently existing intratracheal surfactants are ineffective in this condition. The authors demonstrate that novel nanovesicle aerosols of nonlamellar lipids improved the resistance of pulmonary surfactants to inhibition and are promising as a noninvasive aerosol therapy in acute lung injury.

Soft particle analysis of electrokinetics of biological cells and their model systems

In this article, we review the applications of a novel theory (Ohshima 2009 Sci. Technol. Adv. Mater.10 063001) to the analysis of electrokinetic data for various soft particles, that is, particles covered with an ion-permeable surface layer of polyelectrolytes. Soft particles discussed in this review include various biological cells and hydrogel-coated particles as a model of biological cells. Cellular transformations increase the concentration of sialic acid of glycoproteins and are associated with blocked biosynthesis of glycolipids and aberrant expression of the developmentally programmed biosynthetic pathway. The change in shape or biological function of cells may affect their surface properties and can be detected by electrokinetic measurements. The experimental results were analyzed with Ohshima's electrokinetic formula for soft particles and soft surfaces. As a model system, hydrogel surfaces that mimic biological surfaces were also prepared and their surface properties were studied.

Micro- and nanocarrier-mediated lung targeting

IMPORTANCE OF THE FIELD

Drug delivery to lungs appears to be an attractive proposition on account of the large surface area of the alveolar region; it provides tremendous opportunities to improve drug therapies both systemically and locally using new drug delivery systems. Administration of drugs directly to the lungs is the most appropriate route in the treatment of asthma and other pulmonary diseases such as tuberculosis, chronic obstructive pulmonary disease and lung cancer.

AREAS COVERED IN THIS REVIEW

This review focuses on the utilization of nano- and microcarriers such as microspheres, nanoparticles, liposomes, niosomes and dendrimers for targeted delivery of bioactive molecules to lungs.

WHAT THE READER WILL GAIN

This review sheds light on the current status of nano- and microcarrier-mediated lung targeting of bioactive compounds.

TAKE HOME MESSAGE

The literature review shows that carriers could supplement sustained drug delivery to the lungs, extended duration of action, reduced therapeutic dose, improved patient compliance, and reduced adverse effects of highly toxic drugs. There is still a need to identify more specific receptors that are present exclusively in the lungs. The identification of such receptors may also facilitate drug targeting to further specific parts of the lungs, such as bronchioles and alveoli.

Microencapsulation of antibiotic rifampicin in poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

The aim of this study was the preparation of microparticles containing rifampicin using a biodegradable polymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) for oral administration produced by a bacteria. The poly(3-hydroxybutyrate-co-3-hydroxyvalerate) microparticles with and without rifampicin were prepared by the emulsification and solvent evaporation method, in which chloroform and polyvinyl alcohol are used as the solvent and emulsifier, respectively. Microparticles were obtained within a size range of 20-60 microm by changing the initial poly(3-hydroxybutyrate-co-3-hydroxyvalerate), polyvinyl alcohol and rifampicin concentrations. An encapsulation efficiency value of 14% was obtained. The optimized total yield of 60% of the poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/ rifampicin was obtained. A load of 0.035 mg/1 mg of PHBV was reached. Almost 90% of the drug loaded in the microparticles was released after 24 h. The size, encapsulation efficiency and ribampicin release of the microparticles varied as a function of the initial poly(3-hydroxybutyrate-co-3-hydroxyvalerate), polyvinyl alcohol and rifampicin concentrations. It was demonstrated that the microencapsulated rifampicin, although was not totally available in the medium, exhibited a similar inhibition value as free rifampicin at 24 h of incubation with S. aureus. Cytotoxicity assays demonstrated a reduction of the toxicity when rifampicin was microencapsulated in poly(3-hydroxybutyrate-co-3-hydroxyvalerate) while maintaining its antibacterial activity.

Phagocytic activity of alveolar macrophages toward polystyrene latex microspheres and PLGA microspheres loaded with anti-tuberculosis agent

Phagocytosis of alveolar macrophages (Mphis) toward poly(lactic-co-glycolic acid) (PLGA) microspheres (MS) loaded with the anti-tuberculosis agent rifampicin (RFP-PLGA MS) has been shown to be effective for the treatment of tuberculosis. The phagocytosis should be evaluated in terms of that toward reference MS. We chose polystyrene latex (PSL) MS as a reference. In this study, phagocytic activity of cell line NR8383, derived from rat alveolar Mphi, toward PSL MS with various diameters was examined by incubating the cells for 4h at 37 degrees C with various numbers of PSL MS per Mphi cell (MS/Mphi=0.1-10). The results were then compared with those of the phagocytosis toward RFP-PLGA MS. We determined the phagocytic activity by counting the population of Mphi cells that had phagocytosed MS (N) and the number of particles phagocytosed (n) in microscopic fields. Both N and n for PSL and RFP-PLGA MS increased in general with an increase in MS/Mphi, but both of these values for PSL MS were smaller than those for RFP-PLGA MS. Phagocytosis of the particles were dependent on the particle size; i.e., of the PSL MS the 6-mum ones were taken up by Mphi the most, and the RFP-PLGA MS 3 microm in diameter seemed to be phagocytosed the most efficiently, although we were not able to determine exactly the phagocytosis of 6- and 10-microm RFP-PLGA MS. From the changes in N and n values with MS/Mphi, the phagocytosis of RFP-PLGA MS was likely to enhance the phagocytic activity of Mphi cells, but this effect did not seem to be significant for PSL MS.