In-situ , time-lapse study of extracellular polymeric substance discharge in Streptococcus mutans biofilm

Improving antibacterial ability of Ti-Cu thin films with co-sputtering method

Due to the resistance of some bacteria to antibiotics, research in the field of dealing with bacterial infections is necessary. A practical approach utilized in this study involves the preparation of an antibacterial thin film on the surfaces, which can effectively inhibit and reduce biofilm formation and bacterial adherence. In this study, we report the fabrication of bactericidal titanium (Ti) and copper (Cu) surfaces which involves a powerful co-sputtering method. This method provides a situation in which constituent elements are deposited simultaneously to control the composition of the thin film. Prepared samples were examined by energy-dispersive X-ray spectroscopy (EDX), scanning electron microscopy (SEM), X-ray diffraction (XRD), atomic force microscopy (AFM), and contact angle measurements. To evaluate antibacterial behavior, we used two bacterial strains Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus). Antibacterial activity of the prepared sample was assessed by determining the number of colony-forming units per milliliter (CFU/ml) using a standard viable cell count assay. Results indicated that as the Cu concentration increased, the nanoscale surfaces became rougher, with roughness values rising from 11.85 to 49.65 nm, and the contact angle increased from 40 to 80 degrees, indicating a hydrophilic character. These factors play a significant role in the antibacterial properties of the surface. The Ti-Cu films displayed superior antibacterial ability, with a 99.9% reduction (equivalent to a 5-log reduction) in bacterial viability after 2 h compared to Ti alone against both bacterial strains. Field emission scanning electron microscopy (FE-SEM) images verified that both E. coli and S. aureus cells were physically deformed and damaged the bacterial cell ultrastructure was observed. These findings highlight that adding Cu to Ti can improve the antibacterial ability of the surface while inhibiting bacterial adherence. Therefore, the Ti14-Cu86 sample with the highest percentage of Cu had the best bactericidal rate. Investigation of toxicity of Cu-Ti thin films was conducted the using the MTT assay, which revealed their biocompatibility and absence of cytotoxicity, further confirming their potential as promising biomaterials for various applications.

Antibacterial Effects of Ramulus mori Oligosaccharides against Streptococcus mutans

Ramulus mori has been widely used in traditional Chinese medicine because of its physiological activities, including antibacterial, anti-inflammatory, and antioxidant activities. Antimicrobial properties of Ramulus mori extract have been well described. However, no information is available regarding on Ramulus mori oligosaccharides (RMOS). The aim of this study was to investigate the effects of RMOS on the growth and virulence properties of the cariogenic bacterium Streptococcus mutans. The effects of RMOS on the biofilm structure and virulence gene expression of S. mutans were also evaluated, and the results were compared with the effects of commercial prebiotic galactooligosaccharides. RMOS were found to have an antibacterial effect against S. mutans, resulting in significant reductions in acid production, lactate dehydrogenase activity, adhesion, insoluble extracellular polysaccharide production, glucosyltransferase activity, and biofilm formation in a dose-dependent manner. Moreover, the biofilm structure was visibly damaged. A quantitative real-time PCR assay revealed downregulation of virulence gene-regulated acid production, polysaccharide production, adhesion, biofilm formation, and quorum sensing. These findings suggest that RMOS may be a promising natural product for the prevention of dental caries.

Using Catechol and Zwitterion-Functionalized Copolymers to Prevent Dental Bacterial Adhesion

In this manuscript, we report the synthesis of zwitterionic copolymers and their ability to form antifouling coatings on porous hydroxyapatite as a mimic of dental coatings. Specifically, we systematically investigated how altering the composition of copolymers of catechol methacrylate (Cat-MA or 2) and methacryloyloxyethyl phosphorylcholine (2-MPC) with varying catechol-to-zwitterion ratios impacted their adhesive and antifouling properties, allowing for the rational design of functional coatings. Characterization by ellipsometry, contact angle goniometry, and X-ray photoelectron spectroscopy revealed the presence of hydrophilic copolymer coatings of ∼10 nm thickness. Notably, these copolymers adhered to hydroxyapatite and reduced the level of attachment of both Gram-negative Escherichia coli and Gram-positive Streptococcus oralis. Additionally, in vitro experiments that mimicked the complex mouth environment (i.e., swallowing and using mouthwash) were employed to evaluate S. oralis adhesion, finding that the copolymer coatings reduced the quantity of adhered bacteria. We suggest that these copolymers provide insights into the design of antifouling coatings that are appropriate for use in oral care.

Time-Lapse In Situ 3D Imaging Analysis of Human Enamel Demineralisation Using X-ray Synchrotron Tomography

Caries is a chronic disease that causes the alteration of the structure of dental tissues by acid dissolution (in enamel, dentine and cementum) and proteolytic degradation (dentine and cementum) and generates an important cost of care. There is a need to visualise and characterise the acid dissolution process on enamel due to its hierarchical structure leading to complex structural modifications. The process starts at the enamel surface and progresses into depth, which necessitates the study of the internal enamel structure. Artificial demineralisation is usually employed to simulate the process experimentally. In the present study, the demineralisation of human enamel was studied using surface analysis carried out with atomic force microscopy as well as 3D internal analysis using synchrotron X-ray tomography during acid exposure with repeated scans to generate a time-lapse visualisation sequence. Two-dimensional analysis from projections and virtual slices and 3D analysis of the enamel mass provided details of tissue changes at the level of the rods and inter-rod substance. In addition to the visualisation of structural modifications, the rate of dissolution was determined, which demonstrated the feasibility and usefulness of these techniques. The temporal analysis of enamel demineralisation is not limited to dissolution and can be applied to other experimental conditions for the analysis of treated enamel or remineralisation.

Insight into biofilm-forming patterns: biofilm-forming conditions and dynamic changes in extracellular polymer substances

The microbial biofilm adheres to the surface of the carrier, which protects the pollutant-degrading bacteria and resists harsh environments; thus, research on biofilm-forming patterns will help promote the application of biofilms in wastewater treatment. Herein, univariate analysis and response surface methodology (RSM) confirmed that glucose and mannose at 3-5 g/L promoted biofilm formation. Notably, the microplate method demonstrated that compared to trivalent cations, divalent cations could more greatly enhance the activity (especially magnesium) of the biofilm matrix, and the period of biofilm formation in the three strains was divided into the following stages: initial attachment (0-10 h), microcolony (10-24 h), maturation (24-48 h), and dispersion (36-72 h). During maturation, large amounts of extracellular polysaccharides (EPs) and extracellular DNA (eDNA) were distributed in the extracellular and intracellular spaces, respectively, as observed by super-resolution structured illumination microscopy (SR-SIM). This study enhances the understanding of the characteristics and patterns of biofilm formation and can facilitate the application of biofilms in wastewater treatment.

Phthalate Esters Released from Plastics Promote Biofilm Formation and Chlorine Resistance

Phthalate esters (PAEs) are commonly released from plastic pipes in some water distribution systems. Here, we show that exposure to a low concentration (1-10 μg/L) of three PAEs (dimethyl phthalate (DMP), di-n-hexyl phthalate (DnHP), and di-(2-ethylhexyl) phthalate (DEHP)) promotes Pseudomonas biofilm formation and resistance to free chlorine. At PAE concentrations ranging from 1 to 5 μg/L, genes coding for quorum sensing, extracellular polymeric substances excretion, and oxidative stress resistance were upregulated by 2.7- to 16.8-fold, 2.1- to 18.9-fold, and 1.6- to 9.9-fold, respectively. Accordingly, more biofilm matrix was produced and the polysaccharide and eDNA contents increased by 30.3-82.3 and 10.3-39.3%, respectively, relative to the unexposed controls. Confocal laser scanning microscopy showed that PAE exposure stimulated biofilm densification (volumetric fraction increased from 27.1 to 38.0-50.6%), which would hinder disinfectant diffusion. Biofilm densification was verified by atomic force microscopy, which measured an increase of elastic modulus by 2.0- to 3.2-fold. PAE exposure also stimulated the antioxidative system, with cell-normalized superoxide dismutase, catalase, and glutathione activities increasing by 1.8- to 3.0-fold, 1.0- to 2.0-fold, and 1.2- to 1.6-fold, respectively. This likely protected cells against oxidative damage by chlorine. Overall, we demonstrate that biofilm exposure to environmentally relevant levels of PAEs can upregulate molecular processes and physiologic changes that promote biofilm densification and antioxidative system expression, which enhance biofilm resistance to disinfectants.

In-Situ Investigation on Nanoscopic Biomechanics of Streptococcus mutans at Low pH Citric Acid Environments Using an AFM Fluid Cell

Streptococcus mutans (S. mutans) is widely regarded as the main cause of human dental caries via three main virulence factors: adhesion, acidogenicity, and aciduricity. Citric acid is one of the antibiotic agents that can inhibit the virulence capabilities of S. mutans. A full understanding of the acidic resistance mechanisms (ARMs) causing bacteria to thrive in citrate transport is still elusive. We propose atomic force microscopy (AFM) equipped with a fluid cell to study the S. mutans ARMs via surface nanomechanical properties at citric acid pH 3.3, 2.3, and 1.8. Among these treatments, at pH 1.8, the effect of the citric acid shock in cells is demonstrated through a significantly low number of high adhesion zones, and a noticeable reduction in adhesion forces. Consequently, this study paves the way to understand that S. mutans ARMs are associated with the variation of the number of adhesion zones on the cell surface, which is influenced by citrate and proton transport. The results are expected to be useful in developing antibiotics or drugs involving citric acid for dental plaque treatment.

Antimicrobial Activity of Cinnamaldehyde on Streptococcus mutans Biofilms

Streptococcus mutans is considered the most relevant bacteria in the transition of non-pathogenic commensal oral microbiota to biofilms which contribute to the dental caries process. The present study aimed to evaluate the antimicrobial activity of a natural plant product, cinnamaldehyde against S. mutans biofilms. Minimum inhibitory concentrations (MIC), minimal bactericidal concentration (MBC), and growth curves were determined to assess its antimicrobial effect against planktonic S. mutans. The biofilm biomass and metabolism with different concentrations of cinnamaldehyde and different incubation time points were assessed using the crystal violet and MTT assays. The biofilms were visualized using confocal laser scanning microscopy (CLSM). Bacterial cell surface hydrophobicity, aggregation, acid production, and acid tolerance were evaluated after cinnamaldehyde treatment. The gene expression of virulence-related factors (gtfB, gtfC, gtfD, gbpB, comDE, vicR, ciaH, ldh and relA) was investigated by real-time PCR. The MIC and MBC of cinnamaldehyde against planktonic S. mutans were 1000 and 2000 μg/mL, respectively. The results showed that cinnamaldehyde can decrease biofilm biomass and metabolism at sub-MIC concentrations. CLSM images revealed that the biofilm-covered surface areas decreased with increasing concentrations of cinnamaldehyde. Cinnamaldehyde increased cell surface hydrophobicity, reduced S. mutans aggregation, inhibited acid production, and acid tolerance. Genes expressions in the biofilms were down-regulated in the presence of cinnamaldehyde. Therefore, our data demonstrated that cinnamaldehyde at sub-MIC level suppressed the microbial activity on S. mutans biofilm by modulating hydrophobicity, aggregation, acid production, acid tolerance, and virulence gene expression.

Nanochitosan antimicrobial activity against Streptococcus mutans and Candida albicans dual-species biofilms

Objective

Chitosan nanoparticle (nanochitosan) has a broad antimicrobial spectrum against diverse pathogenic microorganisms. However, its effect on dental caries-associated microorganisms, such as Streptococcus mutans and Candida albicans is yet to be explored. These microorganisms are known for causing early childhood caries. Therefore, this study was aimed at investigating nanochitosan inhibition capacity against dual-species biofilms of S. mutans and C. albicans. In this study, nanochitosan antimicrobial activity is reported against mono and dual biofilm species of S. mutans and/or C. albicans at 3 and 18 h incubation time. Nanochitosan inhibition capacity was observed through biofilm mass quantity and cell viability.

Results

The present study successfully synthesized nanochitosan with average diameter of approximately 20–30 nm, and also established dual-species biofilms of S. mutans and C. albicans in vitro. With nanochitosan treatment, the cell viability of both microorganisms significantly decreased with the increasing concentration of nanochitosan. There was no significant decrease in biofilm mass both in the dual and single-species biofilms after 3 h of incubation. However, greater inhibition of biofilm was observed at 18 h incubation.

Micro-colonization of arsenic-resistant Staphylococcus sp. As-3 on arsenopyrite (FeAsS) drives arsenic mobilization under anoxic sub-surface mimicking conditions

We investigated the subsurface biomatrix of the most abundant As-mineral, arsenopyrite (FeAsS), and meticulously studied a potential biogenic arsenic mobilization phenomenon. An arsenic-resistant [up to 7.5 mM As(III) and 200 mM As(V)] and arsenate-reducing bacterial strain (Staphylococcus sp. As-3) was isolated from a sediment core sample taken from the Budai borehole, on the southwestern coast of Taiwan. Isolate As-3 could reduce 5 mM As(V) to 3.04 mM in 96 h, generating 1.6 mM As(III) under anoxic conditions. Isolate As-3, which adsorbed As(V) up to 19.02 mg g^-1 (cdw) and As(III) up to 0.46 mg g^-1 (cdw), demonstrated effective As-bioaccumulating ability, as corroborated by a TEM-EDS analysis. Under anaerobic batch conditions, isolate As-3 micro-colonies could grow on as well as interact with arsenopyrite (FeAsS), mobilizing arsenic into soluble phase as As(III) and As(V). Using synchrotron radiation-based FTIR micro-spectroscopy, various functional group signatures and critical chemical bonds enabling a direct interaction with arsenopyrite were underpinned, such as a potential P-OFe bond involved in facilitating bacteria-mineral interaction. Using atomic force microscopy, we analyzed the scattered bacterial cell arrangement and structure and measured various biomechanical properties of micro-colonized Staphylococcus sp. As-3 cells on arsenopyrite. We suggest that the release of organic acids from As-3 drives soluble arsenic release in the aqueous phase under anoxic conditions through oxidative dissolution. Furthermore, arsC-encoding putative cytoplasmic arsenic reductase sequencing and transcript characterization indicated that arsC plays a possible role in the reduction of moderately soluble As(V) to highly soluble toxic As(III) under anoxic conditions. Thus, we suggest that firmicutes such as Staphylococcus sp. As-3 may play an important role in microbially-mediated arsenic mobilization, leading to arsenic release in the sub-surface niche.

Cross-kingdom interaction of Candida albicans and Actinomyces viscosus elevated cariogenic virulence

OBJECTIVE

How the interactions between Candida albicans and Actinomyces viscosus contributed to the root caries was not clear. This study aimed to investigate their cross-kingdom interactions on the biomass and the cariogenic virulence in dual-species biofilms.

DESIGN

Suspensions of C. albicans and A. viscosus were formed the mono and polymicrobial biofilms in vitro. Crystal violet assay, viable plate count, scanning electron microscopy and fluorescence in situ hybridization were used to analyze the biomass and biofilm structure. Glycolytic pH drop and the spectrophotometric method were used to evaluate the acid production and hydroxyapatite dissolution, respectively. The exopolysaccharide production was measured by the anthrone-sulfuric acid method, while the adhesion force was measured by atomic force microscopy.

RESULTS

The biomass and colony-forming units of mixed-species were significantly increased compared to that of the mono-species at 24 h, 48 h, 72 h. The structure of dual-species biofilm had more microcolonies and was much denser. The dual-species biofilms significantly decreased the pH value and damaged the hydroxyapatite compared with the mono-species biofilms at various time points, indicating the strong cariogenic virulence. Moreover, the dual-species biofilms significantly enhanced the exopolysaccharide production and adhesion force suggesting the increase of biofilm adhesion.

CONCLUSIONS

Cross-kingdom interactions of C. albicans and A. viscosus significantly elevated the biomass and cariogenic virulence of dual-species biofilm.

Cytotoxicity and antimicrobial action of selected phytochemicals against planktonic and sessile Streptococcus mutans

Background

Dental caries remains the most prevalent and costly oral infectious disease worldwide, encouraging the search for new and more effective antimicrobials. Therefore, the aim of this work was to study the antimicrobial action of selected phytochemicals (eugenol, citronellol, sabinene hydrate, trans-cinnamaldehyde, terpineol and cinnamic acid) against Streptococcus mutans in planktonic and biofilm states as well as the cytotoxicity of these compounds.

Methods

The antibacterial activity of the selected compounds was evaluated by the determination of the minimal bactericidal concentration. The resazurin assay was used to assess the metabolic activity of sessile S. mutans. The cytotoxicity was determined using a fibroblast cell line.

Results

Among the tested phytochemicals, citronellol, cinnamic acid and trans-cinnamaldehyde were the most effective against both planktonic and sessile S. mutans, an effect apparently related to their hydrophobic character. Additionally, these three compounds did not compromise fibroblasts cell viability.

Discussion

Citronellol, cinnamic acid and trans-cinnamaldehyde demonstrated significant antimicrobial activity and low cytotoxicity proposing their potential as a novel group of therapeutic compounds to control oral infectious diseases. Moreover, their effects are particularly relevant when benchmarked against eugenol, a phytochemical commonly used for prosthodontic applications in dentistry.

Identification of Characteristic Macromolecules of Escherichia coli Genotypes by Atomic Force Microscope Nanoscale Mechanical Mapping

The categorization of microbial strains is conventionally based on the molecular method, and seldom are the morphological characteristics in the bacterial strains studied. In this research, we revealed the macromolecular structures of the bacterial surface via AFM mechanical mapping, whose resolution was not only determined by the nanoscale tip size but also the mechanical properties of the specimen. This technique enabled the nanoscale study of membranous structures of microbial strains with simple specimen preparation and flexible working environments, which overcame the multiple restrictions in electron microscopy and label-enable biochemical analytical methods. The characteristic macromolecules located among cellular surface were considered as surface layer proteins and were found to be specific to the Escherichia coli genotypes, from which the averaged molecular sizes were characterized with diameters ranging from 38 to 66 nm, and the molecular shapes were kidney-like or round. In conclusion, the surface macromolecular structures have unique characteristics that link to the E. coli genotype, which suggests that the genomic effects on cellular morphologies can be rapidly identified using AFM mechanical mapping. Graphical Abstract Quantification of surface macromolecules of E. coli cells using AFM mechanical mapping. Surface macromolecules of cellular surface of three E. coli genotypes, MG1655, CFT073, and RS218, were characterized with the sizes ranging from 38 to 66 nm and with round or kidney-like shapes. The topography images were colored with adhesion mapping with the scale bars = 200 nm.