Polymeric non-spherical coarse microparticles fabricated by double emulsion-solvent evaporation for simvastatin delivery

Non-spherical microparticles from complex coacervation of rice or pea proteins and chia mucilage

Complex coacervation is a microencapsulation technique recognized by its low cost, high efficiency, and reproducibility. It involves interactions between oppositely charged biopolymers, such as proteins and polysaccharides. The present study evaluated the formation of non-spherical microparticles through the interactions of rice protein (RP) or pea protein (PP) with chia mucilage (CM) to encapsulate hydrophobic compounds. Gum Arabic (GA) and type B gelatin (GE) were used as model materials. Optimal ratio and pH values for the mixtures were determined through macroscopic, turbidity and zeta potential analyses. The microparticles containing gum Arabic were smaller and more spherical, with mean diameters ranging from 22.03 to 35.20 μm, whereas those containing chia mucilage exhibited an irregular shape and diameters ranging from 33.49 to 53.10 μm. The yields (74.0 %-84.5 %) and encapsulation efficiency (around 99 %) for the microparticles containing chia mucilage were significantly higher than those of the formulations containing gum Arabic (yields of 18.4 %-40.1 %, and encapsulation efficiencies of 8.7 %-71.0 %). Based on the results, the most effective encapsulation system was identified PP:CM. All microparticles formed by chia mucilage and proteins have non-spherical characteristics and some roughness which can be interesting for applications in food or biological systems.

Azithromycin-loaded PLGA microspheres coated with silk fibroin ameliorate inflammation and promote periodontal tissue regeneration

Periodontitis, a widespread inflammatory disease, is the major cause of tooth loss in adults. While mechanical periodontal therapy benefits the periodontal disease treatment, adjunctive periodontal therapy is also necessary. Topically applied anti-inflammatory agents have gained considerable attention in periodontitis therapy. Although azithromycin (AZM) possesses excellent anti-inflammatory properties, its bioavailability is limited owing to poor water solubility and the absence of sustained release mechanisms. Herein, we synthesized biodegradable microspheres (AZM@PLGA-SF) for sustained AZM release to locally ameliorate periodontal inflammation and facilitate periodontal tissue regeneration. AZM was encapsulated in poly (lactic-co-glycolic acid) (PLGA) microspheres (AZM@PLGA) using single emulsion-solvent evaporation, followed by surface coating with silk fibroin (SF) via electrostatic adsorption, reducing the initial burst release of AZM. In vivo, local treatment with AZM@PLGA-SF microspheres significantly reduced periodontal inflammation and restored periodontal tissue to healthy levels. Mechanically, the formulated microspheres regulated the periodontal inflammatory microenvironment by reducing the levels of pro-inflammatory cytokines (tumor necrosis factor -α, interleukin [IL]-6, interferon-γ, IL-2, and IL-17A) in gingival crevicular fluid and promoted the expression of anti-inflammatory cytokines (IL-4 and IL-10). AZM@PLGA-SF microspheres demonstrated excellent biological safety. Therefore, we introduce an anti-inflammatory therapy for periodontitis with substantial potential for mitigating periodontal inflammation and encouraging the repair and regeneration of periodontal tissues.

Adipose-derived mesenchymal stem cell-incorporated PLLA porous microspheres for cartilage regeneration

BACKGROUND

In facial plastic surgery, patients with nasal deformity are often treated by rib cartilage transplantation. In recent years, cartilage tissue engineering has developed as an alternative to complex surgery for patients with minor nasal defects via injection of nasal filler material. In this study, we prepared an injectable nasal filler material containing poly-L-lactic acid (PLLA) porous microspheres (PMs), hyaluronic acid (HA) and adipose-derived mesenchymal stem cells (ADMSCs).

METHODS

We seeded ADMSCs into as-prepared PLLA PMs using our newly invented centrifugation perfusion technique. Then, HA was mixed with ADMSC-incorporated PLLA PMs to form a hydrophilic and injectable cell delivery system (ADMSC-incorporated PMH).

RESULTS

We evaluated the biocompatibility of PMH in vitro and in vivo. PMH has good injectability and provides a favorable environment for the proliferation and chondrogenic differentiation of ADMSCs. In vivo experiments, we observed that PMH has good biocompatibility and cartilage regeneration ability.

CONCLUSION

In this study, a injectable cell delivery system was successfully constructed. We believe that PMH has potential application in cartilage tissue engineering, especially in nasal cartilage regeneration.

Curcumin-loaded polymeric nanomaterials as a novel therapeutic strategy for Alzheimer's disease: A comprehensive review

Alzheimer's disease (AD) stands as a formidable challenge in modern medicine, characterized by progressive neurodegeneration, cognitive decline, and memory impairment. Despite extensive research, effective therapeutic strategies remain elusive. The antioxidant, anti-inflammatory, and neuroprotective properties of curcumin, found in turmeric, have demonstrated promise. The poor bioavailability and rapid systemic clearance of this drug limit its clinical application. This comprehensive review explores the potential of curcumin-loaded polymeric nanomaterials as an innovative therapeutic avenue for AD. It delves into the preparation and characteristics of diverse polymeric nanomaterial platforms, including liposomes, micelles, dendrimers, and polymeric nanoparticles. Emphasis is placed on how these platforms enhance curcumin's bioavailability and enable targeted delivery to the brain, addressing critical challenges in AD treatment. Mechanistic insights reveal how these nanomaterials modulate key AD pathological processes, including amyloid-beta aggregation, tau phosphorylation, oxidative stress, and neuroinflammation. The review also highlighted the preclinical studies demonstrate reduced amyloid-beta plaques and neuroinflammation, alongside improved cognitive function, while clinical trials show promise in enhancing curcumin's bioavailability and efficacy in AD. Additionally, it addresses the challenges of clinical translation, such as regulatory issues, large-scale production, and long-term stability. By synthesizing recent advancements, this review underscores the potential of curcumin-loaded polymeric nanomaterials to offer a novel and effective therapeutic approach for AD, aiming to guide future research and development in this field.

Cellulose Acetate Microparticles Synthesized from Agave sisalana Perrine for Controlled Release of Simvastatin

Simvastatin (SIM) is widely prescribed to treat hyperlipidemia, despite its limitations, such as a short half-life and low oral bioavailability. To overcome these drawbacks, the development of a controlled-release formulation is desirable. This study aims to develop a microparticulate system based on cellulose acetate (ACT) obtained from Agave sisalana Perrine to promote a controlled SIM release. SIM-loaded microparticles (SMP) were prepared using the solvent emulsification-evaporation method. Several parameters were evaluated, including particle size, surface charge, morphology, encapsulation efficiency, thermochemical characteristics, crystallinity, and in vitro release profile. ACT exhibited favorable flow properties after acetylation, with a degree of substitution values superior to 2.5, as confirmed by both the chemical route and H-NMR, indicating the formation of cellulose triacetate. The obtained SMP were spherical with an average size ranging from 1842 to 1857 nm, a zeta potential of -4.45 mV, and a high SIM incorporation efficiency (98%). Thermal and XRD analyses revealed that SIM was homogeneously dispersed into the polymeric matrix in its amorphous state. In vitro studies using dialysis bags revealed that the controlled SIM release from microparticles was higher under simulated intestinal conditions and followed the Higuchi kinetic model. Our results suggest that ACT-based microparticles are a promising system for SIM delivery, which can improve its bioavailability, and result in better patient compliance.

The Fabrication, Drug Loading, and Release Behavior of Porous Mannitol

Porous materials are widely used as an effective strategy for the solubilization of insoluble drugs. In order to improve the solubility and bioavailability of low water-solubility drugs, it is necessary to prepare porous materials. Mannitol is one of the most popular excipients in food and drug formulations. In this study, porous mannitol was investigated as a drug carrier for low water solubility drugs. Its fabrication, drug loading, and drug release mechanisms were investigated. Porous mannitol was fabricated using the co-spray-antisolvent process and utilizing polyvinylpyrrolidone K30 (PVP K30) as the template agent. Porous mannitol particles were prepared by changing the proportion of the template agent, spraying the particles with mannitol, and eluting with ethanol in order to regulate their pore structure. In subsequent studies, porous mannitol morphology and characteristics were determined systematically. Furthermore, curcumin and ibuprofen, two poorly water-soluble drugs, were loaded into porous mannitol, and their release profiles were analyzed. The results of the study indicated that porous mannitol can be prepared using PVP K30 as a template and that the amount of template agent can be adjusted in order to control the structure of the porous mannitol. When the template agent was added in amounts of 1%, 3%, and 5%, the mannitol pore size increased by 167.80%, 95.16%, and 163.98%, respectively, compared to raw mannitol. Molecular docking revealed that mannitol and drugs are adsorbents and adhere to each other by force interaction. The cumulative dissolution of curcumin and ibuprofen-loaded porous mannitol reached 69% and 70%, respectively. The release mechanism of curcumin and ibuprofen from drug-loaded mannitol was suitable for the Korsmeyer-Peppas kinetic model. In summary, the co-spray-antisolvent method proved effective in fabricating porous materials rapidly, and porous mannitol had a remarkable effect on drug solubilization. The results obtained are conducive to the development of porous materials.

Placental cell translocation of folate-conjugated pullulan acetate non-spherical nanoparticles

Due to the adverse effects of free drugs on the fetus, placental-mediated pregnancy complications still lack effective pharmacotherapy. This study aims to construct a non-spherical drug delivery system based on folate-conjugated pullulan acetate (FPA) for placental targeting and translocation. By adjusting the initial solvent system, FPA nanoparticles with different morphologies were prepared using dialysis method without a surfactant. Cytotoxicity and lactate dehydrogenase release assays indicated the good biocompatibility of FPA nanoparticles in BeWo b30 cells. Cellular uptake and in vitro placental barrier transportation studies showed that FPA nanoparticles entered the cells and transported across the cell monolayer, benefiting from the active target effect mediated by the folate receptor. Moreover, non-spherical FPA nanoparticles showed nuclear translocation due to their shape effect. These findings provide a novel aspect in placental-mediated pregnancy treatment and applications in the obstetrics field of drug use during pregnancy.

PLGA-Based Nanoplatforms in Drug Delivery for Inhibition and Destruction of Microbial Biofilm

The biofilm community of microorganisms has been identified as the dominant mode of microbial growth in nature and a common characteristic of different microorganisms such as Pseudomonas aeruginosa, Staphylococcus aureus, and Staphylococcus epidermidis. The biofilm structure helps in the protection from environmental threats including host immune system and antimicrobial agents. Thus, the biofilm community has led to a higher prevalence of multidrug-resistant (MDR) strains in recent years. In this regard, the use of a new class of antibiotics, natural compounds, and anti-biofilm enzymes has been considered for the destruction of the microbial biofilm. However, different drawbacks such as low penetration, high susceptibility to degradation, instability, and poor solubility in aqueous solutions limit the use of anti-biofilm agents (ABAs) in a clinical setting. As such, recent studies have been using poly lactic-co-glycolic acid (PLGA)-based nanoplatforms (PLGA NPFs) for delivery of ABAs that have reported promising results. These particles, due to proper drug loading and release kinetics, could suppress microbial attachment, colonization, and biofilm formation for a long time. Additionally, PLGA NPFs, because of the high drug-loading efficiencies, hydrophilic surface, negative charge, and electrostatic interaction, lead to effective penetration of antibiotics to the deeper layer of the biofilm, thereby eliminating the microbial biofilm. Thus, PLGA NPFs could be considered as a potential candidate for coating catheters and other medical material surfaces for inhibition and destruction of the microbial biofilm. However, the exact interaction of PLGA NPFs and the microbial biofilm should be evaluated in animal studies. Additionally, a future goal will be to develop PLGA formulations as systems that can be used for the treatment of the MDR microbial biofilm, since the exact interactions of PLGA NPFs and these biofilm structures are not elucidated. In the present review article, we have discussed various aspects of PLGA usage for inhibition and destruction of the microbial biofilm along with different methods and procedures that have been used for improving PLGA NPF efficacy against the microbial biofilm.

Particle shape engineering for improving safety and efficacy of doxorubicin - A case study of rod-shaped carriers in resistant small cell lung cancer

Therapeutic drug delivery is known to be influenced by interplay between various design parameters of delivery carriers which influence the drug uptake efficiency and subsequently the effectiveness of treatment. Amongst, the several design parameters such as size, shape and surface charge, particle shape is gaining attention as a crucial design parameter for development of robust and efficient delivery carriers. In this exploration, we investigated the influence of particle shape on injectability and therapeutic effectiveness of the delivery carriers using doxorubicin (DOX) conjugated polymeric microparticles. Results of injectability experiments demonstrated the influence of particle shape with anisotropic rod-shaped particles displaying increased injectability as against spherical particles. Impact of particle shape on therapeutic effectiveness was assessed against small cell lung cancer (SCLC) which was selected as a model disease. Results of cellular uptake studies revealed preferential uptake of rod-shaped particles than spherical particles in cancer cells. These results were further validated by in-vitro tumor simulation studies wherein rod-shaped particles displayed enhanced anti-tumorigenic activity along with distortion of tumor integrity against spheres. Furthermore, the impact of particle size was also assessed on cardiotoxicity, an adverse effect of DOX which limits its therapeutic use. Results illustrated that the high aspect ratio particles displayed diminished cardiotoxicity activity. These results provide valuable insights about influence of particle shape for designing efficient therapeutics.

Biodegradable Microparticles for Regenerative Medicine: A State of the Art and Trends to Clinical Application

Tissue engineering and cell therapy are very attractive in terms of potential applications but remain quite challenging regarding the clinical aspects. Amongst the different strategies proposed to facilitate their implementation in clinical practices, biodegradable microparticles have shown promising outcomes with several advantages and potentialities. This critical review aims to establish a survey of the most relevant materials and processing techniques to prepare these micro vehicles. Special attention will be paid to their main potential applications, considering the regulatory constraints and the relative easiness to implement their production at an industrial level to better evaluate their application in clinical practices.

Preparation of Gentamicin Sulfate Nanoparticles using Eudragit RS-100 and Evaluation of Their Physicochemical Properties

Improving permeability and absorption of drugs are critical research challenges in pharmaceutical science. Gentamicin sulfate is an aminoglycoside antibiotic, which is very active against gram-negative bacteria; however, it has very poor bioavailability. This study aimed to prepare gentamicin nanoparticles with the intention of increased bioavailability. Accordingly, Eudragit RS-100 nanoparticles loaded with gentamicin sulfate were prepared by the double emulsification and solvent evaporation method, a proper technique for encapsulating hydrophilic molecules. Nanoparticles’ suspensions with polymer to drug ratios of 1:1 ([Formula: see text] and 2:1 ([Formula: see text]) were prepared, lyophilized and evaluated for their production yield, physicochemical properties and morphology. The mean particle size was 195.67[Formula: see text]nm and 228[Formula: see text]nm for [Formula: see text] and [Formula: see text], respectively. The formulations’ loading efficiencies were relatively high (85.73 for [Formula: see text] and 85.20 for [Formula: see text]). The nanoparticles’ surface charge (+40.5[Formula: see text]mV) was sufficient to inhibit their aggregation and facilitate the nanoparticles’ absorption through the gastrointestinal tract. The results of differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FT-IR) revealed that drug and polymer stabilized each other by physical interactions between their functional groups. Both formulations presented an initial burst drug release of nearly 20% after 30[Formula: see text]min in phosphate buffer (pH = 7.4). After 24[Formula: see text]h, [Formula: see text] did not release the drug completely, while [Formula: see text] released the whole drug. Overall, nanoparticles with proper characteristics were obtained. This study puts forward the necessity of conducting further research in order to explore the intestinal absorption of these nanoparticles and the possibility of being utilized for oral administration of gentamicin sulfate.

Modulating surface charge of dexamethasone non-spherical microcrystals for improved inner ear delivery

It is important to achieve precise surface charge manipulation of non-spherical drug microcrystals using facile and time-efficient methods for local drug delivery. In this study, silk-coated dexamethasone (DEX) non-spherical microcrystals were synthesized by precipitation technique followed by alternate deposition of poly(allylamine hydrochloride) (PAH) (or PAH-coated Fe₃O₄) and silk fibroin (SF) via layer-by-layer assembly. EDC and glutaraldehyde were employed to manipulate positive or negative charge of particles by simple chemical cross-linking reactions, respectively. In vivo assessment was carried out by intratympanic (IT) injection of DEX non-spherical microcrystals in guinea pigs. In vivo pharmacokinetic results demonstrate that negatively charged DEX microcrystals appeared to improve outcomes of inner ear delivery in comparison to positively-charged counterparts. This is partly because of the adhesive features of the SF. The present study may provide new ideas to construct surface charge-tunable drug delivery vehicles that are capable of crossing biological barriers, especially for inner ear delivery due to the simple and practical strategy.

Composite P(3HB-3HV)-CS Spheres for Enhanced Antibiotic Efficiency

Natural-derived biopolymers are suitable candidates for developing specific and selective performance-enhanced antimicrobial formulations. Composite polymeric particles based on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and chitosan, P(3HB-3HV)-CS, are herein proposed as biocompatible and biodegradable delivery systems for bioproduced antibiotics: bacitracin (Bac), neomycin (Neo) and kanamycin (Kan). The stimuli-responsive spheres proved efficient platforms for boosting the antibiotic efficiency and antibacterial susceptibility, as evidenced against Gram-positive and Gram-negative strains. Absent or reduced proinflammatory effects were evidenced on macrophages in the case of Bac-/Neo- and Kan-loaded spheres, respectively. Moreover, these systems showed superior ability to sustain and promote the proliferation of dermal fibroblasts, as well as to preserve their ultrastructure (membrane and cytoskeleton integrity) and to exhibit anti-oxidant activity. The antibiotic-loaded P(3HB-3HV)-CS spheres proved efficient alternatives for antibacterial strategies.