An electro-mechanical multiscale model of uterine pregnancy contraction

A computationally efficient anisotropic electrophysiological multiscale uterus model: From cell to organ and myometrium to abdominal surface

BACKGROUND AND OBJECTIVE

Preterm labor is a global problem affecting the health of newborns. Despite numerous studies reporting electrophysiological changes throughout pregnancy, the underlying mechanism that triggers labor remains unclear. Electrophysiological modeling can provide additional information to better understand the physiological transition from pregnancy to labor. Previous uterine electrophysiological models do not consider either the tissue thickness or fiber structure, which have both been shown to significantly impact propagation patterns.

METHODS

This paper presents a parallel computational model of the uterus using the bioengineering modeling environment OpenCMISS. This model is a multiscale anisotropic model that spans different levels from cell to organ. At the cellular level, the model utilizes a mathematical representation of uterine myocytes based on multiple ion channels. In the 3D uterine model, fiber structures are added, ranging from horizontal rings in the inner layer to vertically downward fibers in the outer layer, to more accurately depict the electrophysiological activities of the uterus. Additionally, we have developed a multilayer volume conduction model based on the boundary element method to describe the propagation of electrical signals from the myometrium to the abdominal surface.

RESULTS

Our model can not only reproduce faithfully both local non-propagated and global propagated electrical activity, but also simulate the fast wave low and fast wave high components of the electrohysterogram (EHG) on the abdominal surface. The model results support the hypothesis that the fast wave high of the EHG signal is related to uterine excitability and fast wave low is related to signal propagation. The amplitude of the simulated signal on the abdominal surface falls in the ranges of real EHG data, which is inversely proportional to the abdominal subcutaneous fat thickness, and the signal waveform highly depends on electrode position and the relative distance to the pacemaker. In addition, the propagation velocity is highly dependent on the uterus geometry and falls in the real-world data range CONCLUSIONS: Our models facilitate a better understanding of the electrophysiological changes of the uterus during pregnancy and labor, and allow for an investigation of drug effects and/or structural or anatomical abnormalities.

Characteristics of phase synchronization in electrohysterography and tocodynamometry for preterm birth prediction

Preterm birth prediction is important in prenatal care; however, it remains a significant challenge due to the complex physiological mechanisms involved. This study aimed to explore the feasibility of phase synchronization of multiple oscillatory components across electrohysterography (EHG) and tocodynamometry (TOCO) signals to identify preterm births using advanced machine-learning techniques. Using an open-access EHG dataset, we first assessed the degree of phase synchronization of five specified frequency ranges from 0.08 to 5.0 Hz in three individual EHG signals by constructing two distinct sets of mean phase coherence: the inclusion or exclusion of TOCO signals. We then employed two machine-learning models, XGBoost and TabNet, to classify preterm and term delivery conditions and analyze the predictive potential of these features. The models' performance was evaluated by considering varying lengths of time windows and the use of overlapping windows. Our results demonstrate the importance of lower-frequency EHG signals and synchronization patterns across the horizontal plane of the abdomen, particularly synchronization between the upper and lower regions of the uterus. Furthermore, we observed a distinctive pattern in the high-frequency band (1.0-2.2 Hz), emphasizing the important role of the lower horizontal regions with other sites in the synchronization process. Interestingly, our findings indicated that TOCO signals, while not substantially enhancing the overall prediction performance, contributed to slightly improved accuracy rates when combined with EHG signals. This study suggests the critical role of EHG signals and their intricate spatiotemporal patterns in predicting preterm birth, providing insights for the development of more accurate and efficient prediction models.

Simulation of Uterus Active Contraction and Fetus Delivery in ls-dyna

Vaginal childbirth is the final phase of pregnancy when one or more fetuses pass through the birth canal from the uterus, and it is a biomechanical process. The uterine active contraction, causing the pushing force on the fetus, plays a vital role in regulating the fetus delivery process. In this project, the active contraction behaviors of muscle tissue were first modeled and investigated. After that, a finite element method (FEM) model to simulate the uterine cyclic active contraction and delivery of a fetus was developed in ls-dyna. The active contraction was driven through contractile fibers modeled as one-dimensional truss elements, with the Hill material model governing their response. Fibers were assembled in the longitudinal, circumferential, and normal (transverse) directions to correspond to tissue microstructure, and they were divided into seven regions to represent the strong anisotropy of the fiber distribution and activity within the uterus. The passive portion of the uterine tissue was modeled with a Neo Hookean hyperelastic material model. Three active contraction cycles were modeled. The cyclic uterine active contraction behaviors were analyzed. Finally, the fetus delivery through the uterus was simulated. The model of the uterine active contraction presented in this paper modeled the contractile fibers in three-dimensions, considered the anisotropy of the fiber distribution, provided the uterine cyclic active contraction and propagation of the contraction waves, performed a large deformation, and caused the pushing effect on the fetus. This model will be combined with a model of pelvic structures so that a complete system simulating the second stage of the delivery process of a fetus can be established.

Pregnancy state before the onset of labor: a holistic mechanical perspective

Successful pregnancy highly depends on the complex interaction between the uterine body, cervix, and fetal membrane. This interaction is synchronized, usually following a specific sequence in normal vaginal deliveries: (1) cervical ripening, (2) uterine contractions, and (3) rupture of fetal membrane. The complex interaction between the cervix, fetal membrane, and uterine contractions before the onset of labor is investigated using a complete third-trimester gravid model of the uterus, cervix, fetal membrane, and abdomen. Through a series of numerical simulations, we investigate the mechanical impact of (i) initial cervical shape, (ii) cervical stiffness, (iii) cervical contractions, and (iv) intrauterine pressure. The findings of this work reveal several key observations: (i) maximum principal stress values in the cervix decrease in more dilated, shorter, and softer cervices; (ii) reduced cervical stiffness produces increased cervical dilation, larger cervical opening, and decreased cervical length; (iii) the initial cervical shape impacts final cervical dimensions; (iv) cervical contractions increase the maximum principal stress values and change the stress distributions; (v) cervical contractions potentiate cervical shortening and dilation; (vi) larger intrauterine pressure (IUP) causes considerably larger stress values and cervical opening, larger dilation, and smaller cervical length; and (vii) the biaxial strength of the fetal membrane is only surpassed in the cases of the (1) shortest and most dilated initial cervical geometry and (2) larger IUP.

Parametric Solid Models of the At-Term Uterus From Magnetic Resonance Images

Birthing mechanics are poorly understood, though many injuries during childbirth are mechanical, like fetal and maternal tissue damage. Several biomechanical simulation models of parturition have been proposed to investigate birth, but many do not include the uterus. Additionally, most solid models rely on segmenting anatomical structures from clinical images to generate patient geometry, which can be time-consuming. This work presents two new parametric solid modeling methods for generating patient-specific, at-term uterine three-dimensional geometry. Building from an established method of modeling the sagittal uterine shape, this work improves the uterine coronal shape, especially where the fetal head joins the lower uterine wall. Solid models of the uterus and cervix were built from five at-term patients' magnetic resonance imaging (MRI) sets. Using anatomy measurements from MRI-segmented models, two parametric models were created-one that employs an averaged coronal uterine shape and one with multiple axial measurements of the coronal uterus. Through finite element analysis, the two new parametric methods were compared to the MRI-segmented high-fidelity method and a previously published elliptical low-fidelity method. A clear improvement in the at-term uterine shape was found using the two new parametric methods, and agreement in principal Lagrange strain directions was observed across all modeling methods. These methods provide an effective and efficient way to generate three-dimensional solid models of patient-specific maternal uterine anatomy, advancing possibilities for future research in computational birthing biomechanics.

Multiphysics and multiscale modeling of uterine contractions: integrating electrical dynamics and soft tissue deformation with fiber orientation

The development of a comprehensive uterine model that seamlessly integrates the intricate interactions between the electrical and mechanical aspects of uterine activity could potentially facilitate the prediction and management of labor complications. Such a model has the potential to enhance our understanding of the initiation and synchronization mechanisms involved in uterine contractions, providing a more profound comprehension of the factors associated with labor complications, including preterm labor. Consequently, it has the capacity to assist in more effective preparation and intervention strategies for managing such complications. In this study, we present a computational model that effectively integrates the electrical and mechanical components of uterine contractions. By combining a state-of-the-art electrical model with the Hyperelastic Mass-Spring Model (HyperMSM), we adopt a multiphysics and multiscale approach to capture the electrical and mechanical activities within the uterus. The electrical model incorporates the generation and propagation of action potentials, while the HyperMSM simulates the mechanical behavior and deformations of the uterine tissue. Notably, our model takes into account the orientation of muscle fibers, ensuring that the simulated contractions align with their inherent directional characteristics. One noteworthy aspect of our contraction model is its novel approach to scaling the rest state of the mesh elements, as opposed to the conventional method of applying mechanical loads. By doing so, we eliminate artificial strain energy resulting from the resistance of soft tissues' elastic properties during contractions. We validated our proposed model through test simulations, demonstrating its feasibility and its ability to reproduce expected contraction patterns across different mesh resolutions and configurations. Moving forward, future research efforts should prioritize the validation of our model using robust clinical data. Additionally, it is crucial to refine the model by incorporating a more realistic uterus model derived from medical imaging. Furthermore, applying the model to simulate the entire childbirth process holds immense potential for gaining deeper insights into the intricate dynamics of labor.

Mechanical Effects of a Maylard Scar During a Vaginal Birth After a Previous Caesarean

Caesarean section is one of the most common surgeries worldwide, even though there is no evidence supporting maternal and perinatal long-term benefits. Furthermore, the mechanical behavior of a caesarean scar during a vaginal birth after caesarean (VBAC) is not well understood since there are several questions regarding the uterine wound healing process. The aim of this study is to investigate the biomechanical Maylard fiber reorientation and stiffness influence during a VBAC through computational methods. A biomechanical model comprising a fetus and a uterus was developed, and a chemical-mechanical constitutive model that triggers uterine contractions was used, where some of the parameters were adjusted to account for the matrix and fiber stiffness increase in the caesarean scar. Several mechanical simulations were performed to analyze different scar fibers arrangements, considering different values for the respective matrix and fibers stiffness. The results revealed that a random fiber arrangement in the Maylard scar has a much higher impact on its mechanical behavior during a VBAC than the common fibers arrangement present in the uninjured uterine tissue. An increase of the matrix scar stiffness exhibits a lower impact, while an increase of the fiber's stiffness has no significant influence.

Statistical shape analysis of gravid uteri throughout pregnancy by a ray description technique

In order to study the anatomical variability of the uterus induced by pregnancy, a parametrization of gravid uterine geometry based on principal component analysis (PCA) is proposed. Corresponding meshes used for PCA are created by a ray description technique applied to a reference mesh. A smoothed voxel-based methodology is applied to determine the reference mesh from a database of 11 real shapes produced by the FEMONUM project. The ray-based correspondence technique is compared to two existing methods (He, Giessen) as well as a proposed mixed method. Principal component analysis results are based on a database of 11 existing shapes. Results of the parametrization show that 90% of the total variance of the database can be represented with four new shape parameters and that a wide spectrum of shapes can be generated. Graphical Abstract Proposed correspondence technique compared to existing methods.

Physiology and Pathology of Contractility of the Myometrium

Uterine atony is a serious obstetrical complication since it is the leading cause of postpartum hemorrhage. Postpartum hemorrhage (PPH) is one of the 5 major causes of postpartum mortality; therefore, it requires immediate medical intervention, independent of whether delivery occurs normally or with a cesarean section. While in the past years most cases of postpartum hemorrhage were caused due to uterine atony following vaginal delivery, in recent years most PPH cases indicate a significant association with cesarean delivery. There are several methods used in order to avoid such a life-threatening complication, ranging from risk assessment to prevention, and finally medical intervention and management, if such an event occurs. In this scientific paper emphasis is given on the so-called "uterotonic" agents that are currently used, including oxytocin among others. It is, therefore, important to be familiar with these agents as well as understand the physiological mechanism by which they work, since they are used in everyday practice, not only for managing but also for preventing PPH. There are several potential questions that arise from the use of such "uterotonic" agents, and most specifically of oxytocin. Maybe one of the most important issues is the determination of optimal dosing of oxytocin in order to avoid PPH after a cesarean section.

Forces Involved with Labor and Delivery-A Biomechanical Perspective

Childbirth is a primarily biomechanical process of physiology, and one that engineers have recently begun to address in a broader fashion. Computational models are being developed to address the biomechanical effects of parturition on both maternal and fetal tissues. Experimental research is being conducted to understand how maternal tissues adapt to intrauterine forces near the onset of labor. All of this research requires an understanding of the forces that are developed through maternal efforts-both uterine contractions and semi-voluntary pushing-and that can be applied by the clinician to assist with the delivery. This work reviews the current state of knowledge regarding forces of labor and delivery, with a focus on macro-level biomechanics.

Review and Study of Uterine Bioelectrical Waveforms and Vector Analysis to Identify Electrical and Mechanosensitive Transduction Control Mechanisms During Labor in Pregnant Patients

The bioelectrical signals that produce uterine contractions during parturition are not completely understood. The objectives are as follows: (1) to review the literature and information concerning uterine biopotential waveforms generated by the uterus, known to produce contractions, and evaluate mechanotransduction in pregnant patients using electromyographic (EMG) recording methods and (2) to study a new approach, uterine vector analysis, commonly used for the heart: vectorcardiography analysis. The patients used in this study were as follows: (1) patients at term not in labor (n = 3); (2) patients during the 1st stage of labor at cervical dilations from 2 to 10 cm (n = 30); and (3) patients in the 2nd stage of labor and during delivery (n = 3). We used DC-coupled electrodes and PowerLab hardware (model no. PL2604, ADInstruments, Castle Hill, Australia), with software (LabChart, ADInstruments) for storage and analysis of biopotentials. Uterine and abdominal EMG recordings were made from the surface of each patient using 3 electrode pairs with 1 pair (+ and -, with a 31-cm spacing distance) placed in the right/left position (X position) and with 1 pair placed in an up/down position (Y position, also 31 cm apart) and with the third pair at the front/back (Z position). Using signals from the three X, Y, and Z electrodes, slow (0.03 to 0.1 Hz, high amplitude) and fast wave (0.3 to 1 Hz, low amplitude) biopotentials were recorded. The amplitudes of the slow waves and fast waves were significantly higher during the 2nd stage of labor compared to the 1st stage (respectively, p = 9.54 × e^-3 and p = 3.94 × e^-7). When 2 channels were used, for example, the X vs. Y, for 2-D vector analysis or 3 channels, X vs. Y vs. Z, for 3-D analysis, are plotted against each other on their axes, this produces a vector electromyometriogram (EMMG) that shows no directionality for fast waves and a downward direction for slow waves. Similarly, during the 2nd stage of labor during abdominal contractions ("pushing"), the slow and fast waves were enlarged. Manual applied pressure was used to evoke bioelectrical activity to examine the mechanosensitivity of the uterus. Conclusions: (1) Phasic contractility of the uterus is a product of slow waves and groups of fast waves (bursts of spikes) to produce myometrial contractile responses. (2) 2-D and 3-D uterine vector analyses (uterine vector electromyometriogram) demonstrate no directionality of small fast waves while the larger slow waves represent the downward direction of biopotentials towards the cervical opening. (3) Myometrial cell action event excitability and subsequent contractility likely amplify slow wave activity input and uterine muscle contractility via mechanotransduction systems. (4) Models illustrate the possible relationships of slow to fast waves and the association of a mechanotransduction system and pacemaker activity as observed for slow waves and pacemakers in gastrointestinal muscle. (5) The interaction of these systems is thought to regulate uterine contractility. (6) This study suggests a potential indicator of delivery time. Such vector approaches might help us predict the progress of gestation and better estimate the timing of delivery, gestational pathologies reflected in bioelectric events, and perhaps the potential for premature delivery drug and mechanical interventions.

A myofibre model for the study of uterine excitation-contraction dynamics

As the uterus remodels in preparation for delivery, the excitability and contractility of the uterine smooth muscle layer, the myometrium, increase drastically. But when remodelling proceeds abnormally it can contribute to preterm birth, slow progress of labour, and failure to initiate labour. Remodelling increases intercellular coupling and cellular excitability, which are the main targets of pharmaceutical treatments for uterine contraction disorders. However, the way in which electrical propagation and force development depend on intercellular coupling and cellular excitability is not fully understood. Using a computational myofibre model we study the dependency of electrical propagation and force development on intercellular coupling and cellular excitability. This model reveals that intercellular coupling determines the conduction velocity. Moreover, our model shows that intercellular coupling alone does not regulate force development. Further, cellular excitability controls whether conduction across the cells is blocked. Lastly, our model describes how cellular excitability regulates force development. Our results bridge cellular factors, targeted by drugs to regulate uterine contractions, and tissue level electromechanical properties, which are responsible for delivery. They are a step forward towards understanding uterine excitation-contraction dynamics and developing safer and more efficient pharmaceutical treatments for uterine contraction disorders.

Uterus Modeling from Cell to Organ Level: towards Better Understanding of Physiological Basis of Uterine Activity

The relatively limited understanding of the physiology of uterine activation prevents us from achieving optimal clinical outcomes for managing serious pregnancy disorders such as preterm birth or uterine dystocia. There is increasing awareness that multi-scale computational modeling of the uterus is a promising approach for providing a qualitative and quantitative description of uterine physiology. The overarching objective of such approach is to coalesce previously fragmentary information into a predictive and testable model of uterine activity that, in turn, informs the development of new diagnostic and therapeutic approaches to these pressing clinical problems. This article assesses current progress towards this goal. We summarize the electrophysiological basis of uterine activation as presently understood and review recent research approaches to uterine modeling at different scales from single cell to tissue, whole organ and organism with particular focus on transformative data in the last decade. We describe the positives and limitations of these approaches, thereby identifying key gaps in our knowledge on which to focus, in parallel, future computational and biological research efforts.

Spatial-dependent regularization to solve the inverse problem in electromyometrial imaging

Recently, electromyometrial imaging (EMMI) was developed to non-invasively image uterine contractions in three dimensions. EMMI collects body surface electromyography (EMG) measurements and uses patient-specific body-uterus geometry generated from magnetic resonance images to reconstruct uterine electrical activity. Currently, EMMI uses the zero-order Tikhonov method with mean composite residual and smoothing operator (CRESO) to stabilize the underlying ill-posed inverse computation. However, this method is empirical and implements a global regularization parameter over all uterine sites, which is sub-optimal for EMMI given the severe eccentricity of body-uterus geometry. To address this limitation, we developed a spatial-dependent (SP) regularization method that considers both body-uterus eccentricity and EMG noise. We used electrical signals simulated with spherical and realistic geometry models to compare the reconstruction accuracy of the SP method to those of the CRESO and the L-Curve methods. The SP method reconstructed electrograms and potential maps more accurately than the other methods, especially in cases of high eccentricity and noise contamination. Thus, the SP method should facilitate clinical use of EMMI and can be used to improve the accuracy of other electrical imaging modalities, such as Electrocardiographic Imaging. Graphical abstract The spatial-dependent regularization (SP) technique was designed to improve the accuracy of Electromyometrial Imaging (EMMI). The top panel shows the eccentricity of body-uterus geometry and four representative body surface electrograms. The bottom panel shows boxplots of correlation coefficients and relative errors for the electrograms reconstructed with SP and two conventional methods, the L-Curve and mean CRESO methods.

Characterization and automatic classification of preterm and term uterine records

Predicting preterm birth is uncertain, and numerous scientists are searching for non-invasive methods to improve its predictability. Current researches are based on the analysis of ElectroHysteroGram (EHG) records, which contain information about the electrophysiological properties of the uterine muscle and uterine contractions. Since pregnancy is a long process, we decided to also characterize, for the first time, non-contraction intervals (dummy intervals) of the uterine records, i.e., EHG signals accompanied by a simultaneously recorded external tocogram measuring mechanical uterine activity (TOCO signal). For this purpose, we developed a new set of uterine records, TPEHGT DS, containing preterm and term uterine records of pregnant women, and uterine records of non-pregnant women. We quantitatively characterized contraction intervals (contractions) and dummy intervals of the uterine records of the TPEHGT DS in terms of the normalized power spectra of the EHG and TOCO signals, and developed a new method for predicting preterm birth. The results on the characterization revealed that the peak amplitudes of the normalized power spectra of the EHG and TOCO signals of the contraction and dummy intervals in the frequency band 1.0-2.2 Hz, describing the electrical and mechanical activity of the uterus due to the maternal heart (maternal heart rate), are high only during term pregnancies, when the delivery is still far away; and they are low when the delivery is close. However, these peak amplitudes are also low during preterm pregnancies, when the delivery is still supposed to be far away (thus suggesting the danger of preterm birth); and they are also low or barely present for non-pregnant women. We propose the values of the peak amplitudes of the normalized power spectra due to the influence of the maternal heart, in an electro-mechanical sense, in the frequency band 1.0-2.2 Hz as a new biophysical marker for the preliminary, or early, assessment of the danger of preterm birth. The classification of preterm and term, contraction and dummy intervals of the TPEHGT DS, for the task of the automatic prediction of preterm birth, using sample entropy, the median frequency of the power spectra, and the peak amplitude of the normalized power spectra, revealed that the dummy intervals provide quite comparable and slightly higher classification performances than these features obtained from the contraction intervals. This result suggests a novel and simple clinical technique, not necessarily to seek contraction intervals but using the dummy intervals, for the early assessment of the danger of preterm birth. Using the publicly available TPEHG DB database to predict preterm birth in terms of classifying between preterm and term EHG records, the proposed method outperformed all currently existing methods. The achieved classification accuracy was 100% for early records, recorded around the 23rd week of pregnancy; and 96.33%, the area under the curve of 99.44%, for all records of the database. Since the proposed method is capable of using the dummy intervals with high classification accuracy, it is also suitable for clinical use very early during pregnancy, around the 23rd week of pregnancy, when contractions may or may not be present.

Variation-based sparse source imaging in localizing uterine activity

Electrohysterogram source imaging, i.e., moving from the electrode/sensor space to the source space using EHG signals, provide an estimate of spatial distributions of uterine activity at millisecond scale. This paper aims to study the ability of different distributed source localization methods to recover uterine electrical activity sources. Performance was quantified using a detection accuracy index. Our result suggests that the variation based method is able to reconstruct extended uterus sources with the overall high accuracy, where the increasing of the electrodes numbers and the decreasing of the fat thickness induce a better accuracy in localization.

Multi-scale and multi-physics model of the uterine smooth muscle with mechanotransduction

Preterm labor is an important public health problem. However, the efficiency of the uterine muscle during labor is complex and still poorly understood. This work is a first step towards a model of the uterine muscle, including its electrical and mechanical components, to reach a better understanding of the uterus synchronization. This model is proposed to investigate, by simulation, the possible role of mechanotransduction for the global synchronization of the uterus. The electrical diffusion indeed explains the local propagation of contractile activity, while the tissue stretching may play a role in the synchronization of distant parts of the uterine muscle. This work proposes a multi-physics (electrical, mechanical) and multi-scales (cell, tissue, whole uterus) model, which is applied to a realistic uterus 3D mesh. This model includes electrical components at different scales: generation of action potentials at the cell level, electrical diffusion at the tissue level. It then links these electrical events to the mechanical behavior, at the cellular level (via the intracellular calcium concentration), by simulating the force generated by each active cell. It thus computes an estimation of the intra uterine pressure (IUP) by integrating the forces generated by each active cell at the whole uterine level, as well as the stretching of the tissue (by using a viscoelastic law for the behavior of the tissue). It finally includes at the cellular level stretch activated channels (SACs) that permit to create a loop between the mechanical and the electrical behavior (mechanotransduction). The simulation of different activated regions of the uterus, which in this first "proof of concept" case are electrically isolated, permits the activation of inactive regions through the stretching (induced by the electrically active regions) computed at the whole organ scale. This permits us to evidence the role of the mechanotransduction in the global synchronization of the uterus. The results also permit us to evidence the effect on IUP of this enhanced synchronization induced by the presence of SACs. This proposed simplified model will be further improved in order to permit a better understanding of the global uterine synchronization occurring during efficient labor contractions.

Toward noninvasive monitoring of ongoing electrical activity of human uterus and fetal heart and brain

•

Evaluated a fetal-maternal scanner for monitoring electrical maternal and fetal organ activity.

•

The simulated scanner can monitor the uterine and fetal heart and brain activity online.

•

Biomagnetic monitors similar to this instrument should be useful in clinical neurophysiology.

Objective

To evaluate whether a full-coverage fetal-maternal scanner can noninvasively monitor ongoing electrophysiological activity of maternal and fetal organs.

Methods

A simulation study was carried out for a scanner with an array of magnetic field sensors placed all around the torso from the chest to the hip within a horizontal magnetic shielding enclosure. The magnetic fields from internal organs and an external noise source were computed for a pregnant woman with a 35-week old fetus. Signal processing methods were used to reject the external and internal interferences, to visualize uterine activity, and to detect activity of fetal heart and brain.

Results

External interference was reduced by a factor of 1000, sufficient for detecting signals from internal organs when combined with passive and active shielding. The scanner rejects internal interferences better than partial-coverage arrays. It can be used to estimate currents around the uterus. It clearly detects spontaneous activity from the fetal heart and brain without averaging and weaker evoked brain activity at all fetal head positions after averaging.

Conclusion

The simulated device will be able to monitor the ongoing activity of the fetal and maternal organs.

Significance

This type of scanner may become a novel tool in fetal medicine.

Biomechanics of the human uterus

The appropriate biomechanical function of the uterus is required for the execution of human reproduction. These functions range from aiding the transport of the embryo to the implantation site, to remodeling its tissue walls to host the placenta, to protecting the fetus during gestation, to contracting forcefully for a safe parturition and postpartum, to remodeling back to its nonpregnant condition to renew the cycle of menstruation. To serve these remarkably diverse functions, the uterus is optimally geared with evolving and contractile muscle and tissue layers that are cued by chemical, hormonal, electrical, and mechanical signals. The relationship between these highly active biological signaling mechanisms and uterine biomechanical function is not completely understood for normal reproductive processes and pathological conditions such as adenomyosis, endometriosis, infertility and preterm labor. Animal studies have illuminated the rich structural function of the uterus, particularly in pregnancy. In humans, medical imaging techniques in ultrasound and magnetic resonance have been combined with computational engineering techniques to characterize the uterus in vivo, and advanced experimental techniques have explored uterine function using ex vivo tissue samples. The collective evidence presented in this review gives an overall perspective on uterine biomechanics related to both its nonpregnant and pregnant function, highlighting open research topics in the field. Additionally, uterine disease and infertility are discussed in the context of tissue injury and repair processes and the role of computational modeling in uncovering etiologies of disease. WIREs Syst Biol Med 2017, 9:e1388. doi: 10.1002/wsbm.1388 For further resources related to this article, please visit the WIREs website.