GM maize from site-specific recombination technology, what next?

Are null segregants new combinations of heritable material and should they be regulated?

Through genome editing and other techniques of gene technology, it is possible to create a class of organism called null segregants. These genetically modified organisms (GMOs) are products of gene technology but are argued to have no lingering vestige of the technology after the segregation of chromosomes or deletion of insertions. From that viewpoint regulations are redundant because any unique potential for the use of gene technology to cause harm has also been removed. We tackle this question of international interest by reviewing the early history of the purpose of gene technology regulation. The active ingredients of techniques used for guided mutagenesis, e.g., site-directed nucleases, such as CRISPR/Cas, are promoted for having a lower potential per reaction to create a hazard. However, others see this as a desirable industrial property of the reagents that will lead to genome editing being used more and nullifying the promised hazard mitigation. The contest between views revolves around whether regulations could alter the risks in the responsible use of gene technology. We conclude that gene technology, even when used to make null segregants, has characteristics that make regulation a reasonable option for mitigating potential harm. Those characteristics are that it allows people to create more harm faster, even if it creates benefits as well; the potential for harm increases with increased use of the technique, but safety does not; and regulations can control harm scaling.

High efficiency Agrobacterium-mediated site-specific gene integration in maize utilizing the FLP-FRT recombination system

An efficient Agrobacterium-mediated site-specific integration (SSI) technology using the flipase/flipase recognition target (FLP/FRT) system in elite maize inbred lines is described. The system allows precise integration of a single copy of a donor DNA flanked by heterologous FRT sites into a predefined recombinant target line (RTL) containing the corresponding heterologous FRT sites. A promoter-trap system consisting of a pre-integrated promoter followed by an FRT site enables efficient selection of events. The efficiency of this system is dependent on several factors including Agrobacterium tumefaciens strain, expression of morphogenic genes Babyboom (Bbm) and Wuschel2 (Wus2) and choice of heterologous FRT pairs. Of the Agrobacterium strains tested, strain AGL1 resulted in higher transformation frequency than strain LBA4404 THY- (0.27% vs. 0.05%; per cent of infected embryos producing events). The addition of morphogenic genes increased transformation frequency (2.65% in AGL1; 0.65% in LBA4404 THY-). Following further optimization, including the choice of FRT pairs, a method was developed that achieved 19%-22.5% transformation frequency. Importantly, >50% of T0 transformants contain the desired full-length site-specific insertion. The frequencies reported here establish a new benchmark for generating targeted quality events compatible with commercial product development.

Advancing Agrobacterium-Based Crop Transformation and Genome Modification Technology for Agricultural Biotechnology

The last decade has seen significant strides in Agrobacterium-mediated plant transformation technology. This has not only expanded the number of crop species that can be transformed by Agrobacterium, but has also made it possible to routinely transform several recalcitrant crop species including cereals (e.g., maize, sorghum, and wheat). However, the technology is limited by the random nature of DNA insertions, genotype dependency, low frequency of quality events, and variation in gene expression arising from genomic insertion sites. A majority of these deficiencies have now been addressed by improving the frequency of quality events, developing genotype-independent transformation capability in maize, developing an Agrobacterium-based site-specific integration technology for precise gene targeting, and adopting Agrobacterium-delivered CRISPR-Cas genes for gene editing. These improved transformation technologies are discussed in detail in this chapter.

Marker Removal in Transgenic Plants Using Cre Recombinase Delivered with Potato Virus X

In this chapter we present an alternative method to develop marker-free transgenic plants. It makes use of the Cre/loxP recombination system from bacteriophage P1 and consists of two essential components. The first component is the transgenic plant containing a loxP-flanked marker gene. The second component is a cre transient expression vector based on potato virus X. The great benefit of this transient delivery method consists in the avoidance of stable integration of the cre recombinase gene into the plant genome. Upon infection of the loxP-target plant with PVX-Cre, the virus spreads systemically through the plant and causes the recombinase-mediated excision of the marker gene. Marker-free transgenic loci can be transmitted to the progeny by plant regeneration from PVX-Cre systemically infected leaves or self-pollination of virus-infected plants. The protocol covers generation of loxP-target transgenic plants, PVX-mediated delivery of Cre recombinase protein, phenotypic and molecular analysis of recombination events, and transmission of marker-free transgenic loci to the next generation. The transient expression system described in this chapter can be adapted for marker gene removal in other plant species that are amenable for virus infection.

Genetically modified (GM) crops: milestones and new advances in crop improvement

New advances in crop genetic engineering can significantly pace up the development of genetically improved varieties with enhanced yield, nutrition and tolerance to biotic and abiotic stresses. Genetically modified (GM) crops can act as powerful complement to the crops produced by laborious and time consuming conventional breeding methods to meet the worldwide demand for quality foods. GM crops can help fight malnutrition due to enhanced yield, nutritional quality and increased resistance to various biotic and abiotic stresses. However, several biosafety issues and public concerns are associated with cultivation of GM crops developed by transgenesis, i.e., introduction of genes from distantly related organism. To meet these concerns, researchers have developed alternative concepts of cisgenesis and intragenesis which involve transformation of plants with genetic material derived from the species itself or from closely related species capable of sexual hybridization, respectively. Recombinase technology aimed at site-specific integration of transgene can help to overcome limitations of traditional genetic engineering methods based on random integration of multiple copy of transgene into plant genome leading to gene silencing and unpredictable expression pattern. Besides, recently developed technology of genome editing using engineered nucleases, permit the modification or mutation of genes of interest without involving foreign DNA, and as a result, plants developed with this technology might be considered as non-transgenic genetically altered plants. This would open the doors for the development and commercialization of transgenic plants with superior phenotypes even in countries where GM crops are poorly accepted. This review is an attempt to summarize various past achievements of GM technology in crop improvement, recent progress and new advances in the field to develop improved varieties aimed for better consumer acceptance.

Site-specific recombinases: molecular machines for the Genetic Revolution

The fields of molecular genetics, biotechnology and synthetic biology are demanding ever more sophisticated molecular tools for programmed precise modification of cell genomic DNA and other DNA sequences. This review presents the current state of knowledge and development of one important group of DNA-modifying enzymes, the site-specific recombinases (SSRs). SSRs are Nature's 'molecular machines' for cut-and-paste editing of DNA molecules by inserting, deleting or inverting precisely defined DNA segments. We survey the SSRs that have been put to use, and the types of applications for which they are suitable. We also discuss problems associated with uses of SSRs, how these problems can be minimized, and how recombinases are being re-engineered for improved performance and novel applications.

Gene stacking by recombinases

Efficient methods of stacking genes into plant genomes are needed to expedite transfer of multigenic traits to crop varieties of diverse ecosystems. Over two decades of research has identified several DNA recombinases that carryout efficient cis and trans recombination between the recombination sites artificially introduced into the plant chromosome. The specificity and efficiency of recombinases make them extremely attractive for genome engineering. In plant biotechnology, recombinases have mostly been used for removing selectable marker genes and have rarely been extended to more complex applications. The reversibility of recombination, a property of the tyrosine family of recombinases, does not lend itself to gene stacking approaches that involve rounds of transformation for integrating genes into the engineered sites. However, recent developments in the field of recombinases have overcome these challenges and paved the way for gene stacking. Some of the key advancements include the application of unidirectional recombination systems, modification of recombination sites and transgene site modifications to allow repeated site-specific integrations into the selected site. Gene stacking is relevant to agriculturally important crops, many of which are difficult to transform; therefore, development of high-efficiency gene stacking systems will be important for its application on agronomically important crops, and their elite varieties. Recombinases, by virtue of their specificity and efficiency in plant cells, emerge as powerful tools for a variety of applications including gene stacking.

The long road to recombinase-mediated plant transformation

The use of site-specific recombinases to manipulate eukaryotic genomes began nearly three decades ago. Although seemingly parallel efforts were being made in animal and plant systems, the motivation for its development in plants was unique to, at least at the time, crop bioengineering issues. The impetus behind site-specific deletion in plants was to remove antibiotic resistance genes used during transformation but unnecessary in commercial products. Site-specific integration in plants was more than academic curiosity of position effects on gene expression, but a necessary step towards developing the serial stacking of DNA to the same chromosome locus - to insure that bioengineered crops can be improved over time through transgene additions without inflating the number of segregating loci. This article is not a review of the literature on site-specific recombination, but a first person account of the series of events leading to the development of a gene stacking transformation system in plants.

The pollen- and embryo-specific Arabidopsis DLL promoter bears good potential for application in marker-free Cre/loxP self-excision strategy

KEY MESSAGE

Marker-free transgenic plants can be generated with high efficiency by using the Cre/ lox P self-excision system controlled by the pollen- and embryo-specific Arabidopsis DLL promoter. In this work, we aimed to study the feasibility of using the pollen- and embryo-specific DLL promoter of the At4g16160 gene from Arabidopsis thaliana in a Cre/loxP self-excision strategy. A Cre/loxP self-excision cassette controlled by the DLL promoter was introduced into the tobacco genome via Agrobacterium-mediated transformation. No evidence for premature activation of the Cre/loxP system was observed in primary transformants. The efficiency of nptII removal during pollen and embryo development was investigated in transgenic T1 progenies derived from eight self- and four cross-pollinated T0 lines, respectively. Segregation and rooting assays were performed to select recombined T1 plants. Molecular analyses of these plants confirmed the excision event in all analysed T0 lines and marker-free transgenic T1 plants were obtained with efficiency of up to 96.2%. The Arabidopsis DLL promoter appears to be a strong candidate to drive Cre-mediated recombination not only in tobacco as a model plant, but also in other plant species.

Engineering of plant chromosomes

Engineered minimal chromosomes with sufficient mitotic and meiotic stability have an enormous potential as vectors for stacking multiple genes required for complex traits in plant biotechnology. Proof of principle for essential steps in chromosome engineering such as truncation of chromosomes by T-DNA-mediated telomere seeding and de novo formation of centromeres by cenH3 fusion protein tethering has been recently obtained. In order to generate robust protocols for application in plant biotechnology, these steps need to be combined and supplemented with additional methods such as site-specific recombination for the directed transfer of multiple genes of interest on the minichromosomes. At the same time, the development of these methods allows new insight into basic aspects of plant chromosome functions such as how centromeres assure proper distribution of chromosomes to daughter cells or how telomeres serve to cap the chromosome ends to prevent shortening of ends over DNA replication cycles and chromosome end fusion.

An open-source system for in planta gene stacking by Bxb1 and Cre recombinases

The rapid development of crops with multiple transgenic traits arouses the need for an efficient system for creating stacked cultivars. Most major crops rely on classical breeding to introgress the transgene from a laboratory variety to the numerous cultivars adapted to different growing regions. Even with vegetative propagated crops, genetic crosses are conducted during varietal improvement prior to vegetative cloning. The probability to assort the 'x' number of transgenic loci into a single genome may seem trivial, (¼) (x) for a diploid species, but given the 'y' number of other nontransgenic traits that breeders also need to assemble into the same genome, the (¼) (x+y) probability for a 'breeding stack' could quickly make the line conversion process unmanageable. Adding new transgenes onto existing transgenic varieties without creating a new segregating locus would require site-specific integration of new DNA at the existing transgenic locus. Here, we tested a recombinase-mediated gene-stacking scheme in tobacco. Sequential site-specific integration was mediated by the mycobacteriophage Bxb1 integrase-catalyzed recombination between attP and attB sites. Transgenic DNA no longer needed after integration was excised by Cre recombinase-mediated recombination of lox sites. Site-specific integration occurred in ~10% of the integration events, with half of those events usable as substrates for a next round of gene stacking. Among the site-specific integrants, however, a third experienced gene silencing. Overall, precise structure and reproducible expression of the sequentially added triple traits were obtained at an overall rate of ~3% of the transformed clones--a workable frequency for the development of commercial cultivars. Moreover, since neither the Bxb1-att nor the Cre-lox system is under patent, there is freedom to operate.

Less is more: strategies to remove marker genes from transgenic plants

Selectable marker genes (SMGs) and selection agents are useful tools in the production of transgenic plants by selecting transformed cells from a matrix consisting of mostly untransformed cells. Most SMGs express protein products that confer antibiotic- or herbicide resistance traits, and typically reside in the end product of genetically-modified (GM) plants. The presence of these genes in GM plants, and subsequently in food, feed and the environment, are of concern and subject to special government regulation in many countries. The presence of SMGs in GM plants might also, in some cases, result in a metabolic burden for the host plants. Their use also prevents the re-use of the same SMG when a second transformation scheme is needed to be performed on the transgenic host. In recent years, several strategies have been developed to remove SMGs from GM products while retaining the transgenes of interest. This review describes the existing strategies for SMG removal, including the implementation of site specific recombination systems, TALENs and ZFNs. This review discusses the advantages and disadvantages of existing SMG-removal strategies and explores possible future research directions for SMG removal including emerging technologies for increased precision for genome modification.

phiC31 integrase-mediated site-specific recombination in barley

The Streptomyces phage phiC31 integrase was tested for its feasibility in excising transgenes from the barley genome through site-specific recombination. We produced transgenic barley plants expressing an active phiC31 integrase and crossed them with transgenic barley plants carrying a target locus for recombination. The target sequence involves a reporter gene encoding green fluorescent protein (GFP), which is flanked by the attB and attP recognition sites for the phiC31 integrase. This sequence disruptively separates a gusA coding sequence from an upstream rice actin promoter. We succeeded in producing site-specific recombination events in the hybrid progeny of 11 independent barley plants carrying the above target sequence after crossing with plants carrying a phiC31 expression cassette. Some of the hybrids displayed fully executed recombination. Excision of the GFP gene fostered activation of the gusA gene, as visualized in tissue of hybrid plants by histochemical staining. The recombinant loci were detected in progeny of selfed F(1), even in individuals lacking the phiC31 transgene, which provides evidence of stability and generative transmission of the recombination events. In several plants that displayed incomplete recombination, extrachromosomal excision circles were identified. Besides the technical advance achieved in this study, the generated phiC31 integrase-expressing barley plants provide foundational stock material for use in future approaches to barley genetic improvement, such as the production of marker-free transgenic plants or switching transgene activity.

Synthetic chromosome platforms in plants

Synthetic chromosomes provide the means to stack transgenes independently of the remainder of the genome. Combining them with haploid breeding could provide the means to transfer many transgenes more easily among varieties of the same species. The epigenetic nature of centromere formation complicates the production of synthetic chromosomes. However, telomere-mediated truncation coupled with the introduction of site-specific recombination cassettes has been used to produce minichromosomes consisting of little more than a centromere. Methods that have been developed to modify genes in vivo could be applied to minichromosomes to improve their utility and to continue to increase their length and genic content. Synthetic chromosomes establish the means to add or subtract multiple transgenes, multigene complexes, or whole biochemical pathways to plants to change their properties for agricultural applications or to use plants as factories for the production of foreign proteins or metabolites.

Recombinase-mediated gene stacking as a transformation operating system

The current method for combining transgenes into a genome is through the assortment of independent loci, a classical operating system compatible with transgenic traits created by different developers, at different times and/or through different transformation techniques. However, as the number of transgenic loci increases over time, increasingly larger populations are needed to find the rare individual with the desired assortment of transgenic loci along with the non-transgenic elite traits. Introducing a transgene directly into a field cultivar would bypass the need to introgress the engineered trait. However, this necessitates separate transformations into numerous field cultivars, along with the characterization and regulatory approval of each independent transformation event. Reducing the number of segregating transgenic loci could be achieved if multiple traits are introduced at the same time, a preferred option if each of the many traits is new or requires re-engineering. If re-engineering of previously introduced traits is not needed, then appending a new trait to an existing locus would be a rational strategy. The insertion of new DNA at a known locus can be accomplished by site-specific integration, through a host-dependent homology-based process, or a heterologous site-specific recombination system. Here, we discuss gene stacking through the use of site-specific recombinases.

Successive and targeted DNA integrations in the Drosophila genome by Bxb1 and phiC31 integrases

At present ϕC31 is the only phage integrase system available for directionally regulated site-specific DNA integration in the Drosophila genome. Here we report that mycobacteriophage Bxb1 integrase also mediates targeted DNA integration in Drosophila with high specificity and efficiency. By alternately using Bxb1 and ϕC31, we were able to carry out multiple rounds of successive and targeted DNA integrations in our genomic engineering founder lines for the purpose of generating complex knock-in alleles.

Recombinase technology: applications and possibilities

The use of recombinases for genomic engineering is no longer a new technology. In fact, this technology has entered its third decade since the initial discovery that recombinases function in heterologous systems (Sauer in Mol Cell Biol 7(6):2087-2096, 1987). The random insertion of a transgene into a plant genome by traditional methods generates unpredictable expression patterns. This feature of transgenesis makes screening for functional lines with predictable expression labor intensive and time consuming. Furthermore, an antibiotic resistance gene is often left in the final product and the potential escape of such resistance markers into the environment and their potential consumption raises consumer concern. The use of site-specific recombination technology in plant genome manipulation has been demonstrated to effectively resolve complex transgene insertions to single copy, remove unwanted DNA, and precisely insert DNA into known genomic target sites. Recombinases have also been demonstrated capable of site-specific recombination within non-nuclear targets, such as the plastid genome of tobacco. Here, we review multiple uses of site-specific recombination and their application toward plant genomic engineering. We also provide alternative strategies for the combined use of multiple site-specific recombinase systems for genome engineering to precisely insert transgenes into a pre-determined locus, and removal of unwanted selectable marker genes.

Engineered plant minichromosomes

The advent of transgenic technologies has met many challenges, both technical and political; however, these technologies are now widely applied, particularly for crop improvement. Bioengineering has resulted in plants carrying resistance to herbicides, insects, and viruses, as well as entire biosynthetic pathways. Some of the technical challenges in generating transgenic plant or animal materials include: an inability to control the location and nature of the integration of transgenic DNA into the host genome, and linkage of transformed genes to selectable antibiotic resistance genes used in the production of the transgene cassette. Furthermore, successive transformation of multiple genes may require the use of several selection genes. The coordinated expression of multiple stacked genes would be required for complex biosynthetic pathways or combined traits. Engineered nonintegrating minichromosomes can overcome many of these problems and hold much promise as key players in the next generation of transgenic technologies for improved crop plants. In this review, we discuss the history of artificial chromosome technology with an emphasis on engineered plant minichromosomes.

Transgenic hybrid aspen overexpressing the Atwbc19 gene encoding an ATP-binding cassette transporter confers resistance to four aminoglycoside antibiotics

Antibiotic-resistance genes of bacterial origin are invaluable markers for plant genetic engineering. However, these genes are feared to pose possible risk to human health by horizontal gene transfer from transgenic plants to bacteria, potentially resulting in antibiotic-resistant pathogenic bacteria; this is a considerable regulatory concern in some countries. The Atwbc19 gene, encoding an Arabidopsis thaliana ATP-binding cassette transporter, has been reported to confer resistance to kanamycin specifically as an alternative to bacterial antibiotic-resistance genes. In this report, we transformed hybrid aspen (Populus canescens x P. grandidentata) with the Atwbc19 gene. Unlike Atwbc19-transgenic tobacco that was only resistant to kanamycin, the transgenic Populus plants also showed resistance to three other aminoglycoside antibiotics (neomycin, geneticin, and paromomycin) at comparable levels to plants containing a CaMV35S-nptII cassette. Although it is unknown why the transgenic Populus with the Atwbc19 gene is resistant to all aminoglycoside antibiotics tested, the broad utility of the Atwbc19 gene as a reporter gene is confirmed here in a second dicot species. Because the Atwbc19 gene is plant-ubiquitous, it might serve as an alternative selectable marker to current bacterial antibiotic-resistance marker genes and alleviate the potential risk for horizontal transfer of bacterial-resistance genes in transgenic plants.

Transgene excision from wheat chromosomes by phage phiC31 integrase

The Streptomyces phage phiC31 integrase was tested for its ability to excise transgenic DNA from the wheat genome by site-specific recombination. Plants that stably express phiC31 integrase were crossed to plants carrying a target construct bearing the phiC31 recognition sites, attP and attB. In the progeny, phiC31 recombinase mediates recombination between the att sites of the target locus, which results in excision of the intervening DNA. Recombination events could be identified in 34 independent wheat lines by PCR and Southern blot analysis and by sequencing of the excision footprints. Recombinant loci were inherited to the subsequent generation. The results presented here establish the integrase-att system as a tool for catalysing the precise elimination of DNA sequences from wheat chromosomes.

Cre-mediated seed-specific transgene excision in tobacco

Here we report the production of marker-free transgenic plants expressing phenolic compounds with high pharmacological value. Our strategy consisted in simultaneous delivery of lox-target and cre-containing constructs into the plant genome by cotransformation. In the Cre-vector, the cre recombinase gene was controlled by a seed-specific napin promoter. In the lox-target construct the selectable bar gene was placed between two lox sites in direct orientation, while a napin promoter driven vstI gene was inserted outside of the lox sites. Upon seed-specific cre induction the bar expression cassette was excised from the tobacco genome. Genetic and molecular analysis of T1 progeny plants indicated DNA excision in all 10 transgenic lines tested. RP-HPLC analysis demonstrated that the expression of the vstI gene resulted in accumulation of trans-resveratrol and its glycosylated derivative piceid in seeds of all marker free lines. These findings indicate that the seed-specific marker gene excision did not interfere with the expression of the gene of interest. Our data demonstrated the feasi of a developmentally controlled cre gene to mediate site-specific excision in tobacco very efficiently.

Textpresso site-specific recombinases: A text-mining server for the recombinase literature including Cre mice and conditional alleles

Textpresso Site Specific Recombinases (http://ssrc.genetics.uga.edu/) is a text-mining web server for searching a database of more than 9,000 full-text publications. The papers and abstracts in this database represent a wide range of topics related to site-specific recombinase (SSR) research tools. Included in the database are most of the papers that report the characterization or use of mouse strains that express Cre recombinase as well as papers that describe or analyze mouse lines that carry conditional (floxed) alleles or SSR-activated transgenes/knockins. The database also includes reports describing SSR-based cloning methods such as the Gateway or the Creator systems, papers reporting the development or use of SSR-based tools in systems such as Drosophila, bacteria, parasites, stem cells, yeast, plants, zebrafish, and Xenopus as well as publications that describe the biochemistry, genetics, or molecular structure of the SSRs themselves. Textpresso Site Specific Recombinases is the only comprehensive text-mining resource available for the literature describing the biology and technical applications of SSRs.

PhiC31 recombination system demonstrates heritable germinal transmission of site-specific excision from the Arabidopsis genome

Background

The large serine recombinase phiC31 from broad host range Streptomyces temperate phage, catalyzes the site-specific recombination of two recognition sites that differ in sequence, typically known as attachment sites attB and attP. Previously, we characterized the phiC31 catalytic activity and modes of action in the fission yeast Schizosaccharomyces pombe.

Results

In this work, the phiC31 recombinase gene was placed under the control of the Arabidopsis OXS3 promoter and introduced into Arabidopsis harboring a chromosomally integrated attB and attP-flanked target sequence. The phiC31 recombinase excised the attB and attP-flanked DNA, and the excision event was detected in subsequent generations in the absence of the phiC31 gene, indicating germinal transmission was possible. We further verified that the genomic excision was conservative and that introduction of a functional recombinase can be achieved through secondary transformation as well as manual crossing.

Conclusion

The phiC31 system performs site-specific recombination in germinal tissue, a prerequisite for generating stable lines with unwanted DNA removed. The precise site-specific deletion by phiC31 in planta demonstrates that the recombinase can be used to remove selectable markers or other introduced transgenes that are no longer desired and therefore can be a useful tool for genome engineering in plants.

Simultaneous excision of two transgene flanking sequences and resolution of complex integration loci

In planta excision techniques have proven useful both for basic biology and applied biotechnology. In this report, we describe a simple site-specific recombination (SSR) strategy that simultaneously removes pre-defined DNA sequences from both sides of a transgenic "gene of interest," leaving only the desired gene and short sequences from the recombinase recognition site. We have used the FLP/FRT SSR system to provide a proof of concept, though any of several other SSR systems could be used in the same way. The frequency of double excision ranged from 33% to 83% in different transgenic lines. We show that a single SSR reaction can simultaneously carry out double excisions and resolve complex transgene loci at high frequency. The method has direct biotechnological application and provides a useful tool for basic research.

Expression of active Streptomyces phage phiC31 integrase in transgenic wheat plants

Site-specific recombination systems are becoming an important tool for the genetic modification of crop plants. Here we report the functional expression of the Streptomyces phage-derived phiC31 recombinase (integrase) in wheat. T-DNA constructs containing a phiC31 integrase transgene were stably transformed into wheat plants via particle gun bombardment. A plant-virus-based assay system was used to monitor the site-specific recombination activity of the recombinant integrase protein in vivo. We established several independent doubled haploid (DH) inbred lines that constitutively express an active integrase enzyme without any apparent detrimental effects on plant growth and development. The potential of phiC31 integrase expression in crop plants related to transgene control technologies or hybrid breeding systems is discussed.

[Application prospect of new site-specific recombination systems in gene transformation and gene stacking]

Site-specific recombination technology provides an important means for regulating transgene expression and improving efficiency of gene transformation. This technique can lead to the translocation, inversion, deletion, and integration, and the expression of the affected genes can be manipulated in different tissues and organs at different developmental periods. Using site-specific recombination system in gene transformation, we can not only acquire plenty of transformants with precise structural fidelity and faithful expression, but also understand the function of new genes efficiently. Gene stacking technology based on the site-specific recombination can produce transgenic crops with good complex traits, which will accelerate the process of research and development of elite cultivars and provide technical support for the exploration of transgenic crops in China.

Genetic tools for select-agent-compliant manipulation of Burkholderia pseudomallei

Because of Burkholderia pseudomallei's classification as a select agent in the United States, genetic manipulation of this bacterium is strictly regulated. Only a few antibiotic selection markers, including gentamicin, kanamycin, and zeocin, are currently approved for use with this bacterium, but wild-type strains are highly resistant to these antibiotics. To facilitate routine genetic manipulations of wild-type strains, several new tools were developed. A temperature-sensitive pRO1600 broad-host-range replicon was isolated and used to construct curable plasmids where the Flp and Cre recombinase genes are expressed from the rhamnose-regulated Escherichia coli P(BAD) promoter and kanamycin (nptI) and zeocin (ble) selection markers from the constitutive Burkholderia thailandensis ribosomal P(S12) or synthetic bacterial P(EM7) promoter. Flp and Cre site-specific recombination systems allow in vivo excision and recycling of nptII and ble selection markers contained on FRT or loxP cassettes. Finally, expression of Tn7 site-specific transposase from the constitutive P1 integron promoter allowed development of an efficient site-specific chromosomal integration system for B. pseudomallei. In conjunction with a natural transformation method, the utility of these new tools was demonstrated by isolating an unmarked delta(amrRAB-oprA) efflux pump mutant. Exploiting natural transformation, chromosomal DNA fragments carrying this mutation marked with zeocin resistance were transferred between the genomes of two different B. pseudomallei strains. Lastly, the deletion mutation was complemented by a chromosomally integrated mini-Tn7 element carrying the amrAB-oprA operon. The new tools allow routine select-agent-compliant genetic manipulations of B. pseudomallei and other Burkholderia species.

Marker-free transgenic plants through genetically programmed auto-excision

We present here a vector system to obtain homozygous marker-free transgenic plants without the need of extra handling and within the same time frame as compared to transformation methods in which the marker is not removed. By introducing a germline-specific auto-excision vector containing a cre recombinase gene under the control of a germline-specific promoter, transgenic plants become genetically programmed to lose the marker when its presence is no longer required (i.e. after the initial selection of primary transformants). Using promoters with different germline functionality, two modules of this genetic program were developed. In the first module, the promoter, placed upstream of the cre gene, confers CRE functionality in both the male and the female germline or in the common germline (e.g. floral meristem cells). In the second module, a promoter conferring single germline-specific CRE functionality was introduced upstream of the cre gene. Promoter sequences used in this work are derived from the APETALA1 and SOLO DANCERS genes from Arabidopsis (Arabidopsis thaliana) Columbia-0 conferring common germline and single germline functionality, respectively. Introduction of the genetic program did not reduce transformation efficiency. Marker-free homozygous progeny plants were efficiently obtained, regardless of which promoter was used. In addition, simplification of complex transgene loci was observed.