Hill’s nano-thermodynamics is equivalent with Gibbs’ thermodynamics for surfaces of constant curvatures

Nanoscale thermodynamics needs the concept of a disjoining chemical potential

Disjoining pressure was discovered by Derjaguin in 1930's, which describes the difference between the pressure of a strongly confined fluid and the corresponding one in a bulk phase. It has been revealed recently that the disjoining pressure is at the origin of distinct differential and integral surface tensions for strongly confined fluids. Here we show how the twin concept, disjoining chemical potential, arises in a reminiscent way although it comes out eighty years later. This twin concept advances our understanding of nanoscale thermodynamics. Ensemble-dependence (or environment-dependence) is one hallmark of thermodynamics of small systems. We show that integral surface tension is ensemble-dependent while differential surface tension is not. Moreover, two generalized Gibbs-Duhem equations involving integral surface tensions are derived, as well as two additional adsorption equations relating surface tensions to adsorption-induced strains. All the results obtained in this work further evidence that an approach alternative of Hill's nanothermodynamics is possible, by extending Gibbs surface thermodynamics instead of resorting to Hill's replica trick. Moreover, we find a compression-expansion hysteresis without any underlying phase transition.

Emergence and Breaking of Duality Symmetry in Generalized Fundamental Thermodynamic Relations

Thermodynamics as limiting behaviors of statistics is generalized to arbitrary systems with probability a priori where the thermodynamic infinite-size limit is replaced by a multiple-measurement limit. A duality symmetry between Massieu's and Gibbs's entropy arises in the limit of infinitely repeated observations, yielding the Gibbs equation and Hill-Gibbs-Duhem equation (HGDE) as a dual pair. If a system has a thermodynamic limit satisfying Callen's postulate, entropy being an Eulerian function, the symmetry is lost: the HGDE reduces to the Gibbs-Duhem equation. This theory provides a de-mechanized foundation for classical and nanothermodynamics and offers a framework for distilling emergence from large data, free from underlying details.

Fluctuation-Dissipation Theorems for Multiphase Flow in Porous Media

A thermodynamic description of porous media must handle the size- and shape-dependence of media properties, in particular on the nano-scale. Such dependencies are typically due to the presence of immiscible phases, contact areas and contact lines. We propose a way to obtain average densities suitable for integration on the course-grained scale, by applying Hill's thermodynamics of small systems to the subsystems of the medium. We argue that the average densities of the porous medium, when defined in a proper way, obey the Gibbs equation. All contributions are additive or weakly coupled. From the Gibbs equation and the balance equations, we then derive the entropy production in the standard way, for transport of multi-phase fluids in a non-deformable, porous medium exposed to differences in boundary pressures, temperatures, and chemical potentials. Linear relations between thermodynamic fluxes and forces follow for the control volume. Fluctuation-dissipation theorems are formulated for the first time, for the fluctuating contributions to fluxes in the porous medium. These give an added possibility for determination of the Onsager conductivity matrix for transport through porous media. Practical possibilities are discussed.

Gibbs thermodynamics and surface properties at the nanoscale

Gibbs's classical thermodynamic framework approximates systems as infinitely large phases separated by infinitely thin surfaces. The range of validity of this classical framework naturally comes under scrutiny as we become interested in the properties of ever smaller systems. This Communication clarifies that while Gibbs's original framework of bulk phase thermodynamics did require modifications to describe the properties of very small (i.e., non-additive) phases, his classical framework remains fundamentally valid to describe the thermodynamic properties of surfaces. We explain why classical surface laws are applicable at the nanoscale, as suggested by simulations and confirmed by experiments. We also show that a generalized Gibbs-Tolman-Koenig-Buff equation and the resulting Tolman's law for surface tension are obtained from a classical thermodynamic analysis in the Tolman region, a region of interaction between the system and the environment.

Physico-chemical properties of selenium-tellurium alloys across the scales

Selenium and tellurium are both energy critical elements as defined by the American Physical Society and the Materials Research Society. When mixed together, both elements form an alloy. The size- and shape-dependent thermal and optical properties of this alloy are investigated in this manuscript by using nano-thermodynamics and machine learning techniques. This alloy is found to have particularly interesting properties for solar cell applications.

Adsorption of an Ideal Gas on a Small Spherical Adsorbent

The ideal gas model is an important and useful model in classical thermodynamics. This remains so for small systems. Molecules in a gas can be adsorbed on the surface of a sphere. Both the free gas molecules and the adsorbed molecules may be modeled as ideal for low densities. The adsorption energy, Us, plays an important role in the analysis. For small adsorbents this energy depends on the curvature of the adsorbent. We model the adsorbent as a sphere with surface area Ω=4πR2, where R is the radius of the sphere. We calculate the partition function for a grand canonical ensemble of two-dimensional adsorbed phases. When connected with the nanothermodynamic framework this gives us the relevant thermodynamic variables for the adsorbed phase controlled by the temperature T, surface area Ω, and chemical potential μ. The dependence of intensive variables on size may then be systematically investigated starting from the simplest model, namely the ideal adsorbed phase. This dependence is a characteristic feature of small systems which is naturally expressed by the subdivision potential of nanothermodynamics. For surface problems, the nanothermodynamic approach is different, but equivalent to Gibbs’ surface thermodynamics. It is however a general approach to the thermodynamics of small systems, and may therefore be applied to systems that do not have well defined surfaces. It is therefore desirable and useful to improve our basic understanding of nanothermodynamics.

Nanothermodynamic Description and Molecular Simulation of a Single-Phase Fluid in a Slit Pore

We have described for the first time the thermodynamic state of a highly confined single-phase and single-component fluid in a slit pore using Hill's thermodynamics of small systems. Hill's theory has been named nanothermodynamics. We started by constructing an ensemble of slit pores for controlled temperature, volume, surface area, and chemical potential. We have presented the integral and differential properties according to Hill, and used them to define the disjoining pressure on the new basis. We identified all thermodynamic pressures by their mechanical counterparts in a consistent manner, and have given evidence that the identification holds true using molecular simulations. We computed the entropy and energy densities, and found in agreement with the literature, that the structures at the wall are of an energetic, not entropic nature. We have shown that the subdivision potential is unequal to zero for small wall surface areas. We have showed how Hill's method can be used to find new Maxwell relations of a confined fluid, in addition to a scaling relation, which applies when the walls are far enough apart. By this expansion of nanothermodynamics, we have set the stage for further developments of the thermodynamics of confined fluids, a field that is central in nanotechnology.

When Thermodynamic Properties of Adsorbed Films Depend on Size: Fundamental Theory and Case Study

Small system properties are known to depend on geometric variables in ways that are insignificant for macroscopic systems. Small system considerations are therefore usually added to the conventional description as needed. This paper presents a thermodynamic analysis of adsorbed films of any size in a systematic and general way within the framework of Hill’s nanothermodynamics. Hill showed how to deal with size and shape as variables in a systematic manner. By doing this, the common thermodynamic equations for adsorption are changed. We derived the governing thermodynamic relations characteristic of adsorption in small systems, and point out the important distinctions between these and the corresponding conventional relations for macroscopic systems. We present operational versions of the relations specialized for adsorption of gas on colloid particles, and we applied them to analyze molecular simulation data. As an illustration of their use, we report results for CO2 adsorbed on graphite spheres. We focus on the spreading pressure, and the entropy and enthalpy of adsorption, and show how the intensive properties are affected by the size of the surface, a feature specific to small systems. The subdivision potential of the film is presented for the first time, as a measure of the film’s smallness. For the system chosen, it contributes with a substantial part to the film enthalpy. This work can be considered an extension and application of the nanothermodynamic theory developed by Hill. It provides a foundation for future thermodynamic analyses of size- and shape-dependent adsorbed film systems, alternative to that presented by Gibbs.

Two-Phase Equilibrium Conditions in Nanopores

It is known that thermodynamic properties of a system change upon confinement. To know how, is important for modelling of porous media. We propose to use Hill's systematic thermodynamic analysis of confined systems to describe two-phase equilibrium in a nanopore. The integral pressure, as defined by the compression energy of a small volume, is then central. We show that the integral pressure is constant along a slit pore with a liquid and vapor in equilibrium, when Young and Young-Laplace's laws apply. The integral pressure of a bulk fluid in a slit pore at mechanical equilibrium can be understood as the average tangential pressure inside the pore. The pressure at mechanical equilibrium, now named differential pressure, is the average of the trace of the mechanical pressure tensor divided by three as before. Using molecular dynamics simulations, we computed the integral and differential pressures, p ^ and p, respectively, analysing the data with a growing-core methodology. The value of the bulk pressure was confirmed by Gibbs ensemble Monte Carlo simulations. The pressure difference times the volume, V, is the subdivision potential of Hill, ( p - p ^ ) V = ϵ . The combined simulation results confirm that the integral pressure is constant along the pore, and that ϵ / V scales with the inverse pore width. This scaling law will be useful for prediction of thermodynamic properties of confined systems in more complicated geometries.

Hybrids of Polymeric Capsules, Lipids, and Nanoparticles: Thermodynamics and Temperature Rise at the Nanoscale and Emerging Applications

The importance of thermodynamics does not need to be emphasized. Indeed, elevated temperature processes govern not only industrial scale production but also self-assembly, chemical reaction, interaction between molecules, etc. Not surprisingly, biological processes typically take place at a specific temperature. Here, we look at possibilities to raise the localized temperature by a laser around noble-metal nanoparticles incorporated into shells of layer-by-layer polyelectrolyte microcapsules-freely suspended delivery vehicles in an aqueous solution, developed in the Department of Interfaces, Max Planck Institute of Colloids and Interfaces, headed by Helmuth Möhwald. Understanding the mechanisms of localized temperature rise is essential, that is why we analyze the influence of incident intensity, nanoparticle size, their distribution and aggregation state, as well as thermodynamics at the nanoscale. This leads us to scrutinize "global" (used for thermal encapsulation) versus "local" (used for release of encapsulated materials) temperature rise. Similar analysis is extended to planar polymeric coatings, the lipid membrane system of vesicles and cells, on which nanoparticles are adsorbed. Insights are provided into the mechanisms of physicochemical and biological effects, the nature of which has always been profoundly, interactively, and engagingly discussed in the Department of Interfaces. This analysis is combined with recent developments providing outlook and highlighting a broad range of emerging applications.