Quantum chemical designing of indolo[3,2,1-jk]carbazole-based dyes for highly efficient nonlinear optical properties

Unveiling electronic and remarkable non-linear optical properties of boron-nitrogen carbazole-based compounds via modification of π-linker and donor units: a DFT study

Boron-nitrogen carbazole (BNCz) based aromatic chromophores have been considered as promising materials in non-linear optical domains due to their distinctive electronic and charge-transfer capabilities. This study presents the electronic and non-linear optical properties of BNCz-based compounds (BTNC-BNPZ). Additionally, a new series of four BNCz-based compounds (BNTP-BNTO) with D-π-A framework was designed by modifying the donors and π-spacer. Structural optimization and optoelectronic properties of BNCz based compounds were determined using density functional theory/time-dependent density functional theory (DFT/TD-DFT) calculations at M06/6-311G(d,p) level. The optimized structures were used to perform frontier molecular orbitals (FMOs), density of states (DOS), transition density matrix (TDM), UV-Visible and non-linear optical (NLO) analyses of examined compounds. The red-shifted absorption spectrum (412.854-566.138 nm) combined with a suitable energy gap (2.784-3.774 eV) facilitates significant charge migration from HOMO to LUMO. The global reactivity descriptors revealed notable softness and significant chemical reactivity in all above-mentioned chromophores. Among all the studied compounds, BNPZ displayed the narrowest band gap (2.784 eV), the highest absorption peak (566.138 nm), and lowest excitation energy (2.190 eV), highlighting its remarkable electronic characteristics. Furthermore, DOS visualizations and TDM heat maps support the FMO findings, confirming the presence of charge densities in a chromophore. All the compounds showed an increased exciton dissociation rate due to their lower exciton binding energy values (E b = 0.771-0.480 eV). Moreover, NBO analysis revealed that enhanced hyperconjugation and strong intramolecular interactions played a crucial role in stabilizing the studied compounds. Among all the derivatives, BNTP exhibited the highest β tot (74.0 × 10-30 esu) and γ tot (81.1 × 10-35 esu) values, suggesting its promising potential as an NLO material.

Synthesis, Characterizations, Hirshfeld Surface Analysis, DFT, and NLO Study of a Schiff Base Derived from Trifluoromethyl Amine

We synthesized an imine-based (Schiff base) crystalline organic chromophore, i.e., (E)-2-ethoxy-6-(((3-(trifluoromethyl)phenyl)imino)methyl)phenol (ETPMP), and explored its nonlinear optical (NLO) properties. The crystalline structure of ETPMP was determined by the XRD technique and equated with the associated structures utilizing a Cambridge Structural Database search. The supramolecular assembly of ETPMP was investigated regarding intermolecular interactions and short contacts by Hirshfeld surface analysis. Void analysis was performed to check the mechanical response of the crystal. Supramolecular assembly was further inspected by interaction energy calculations that were performed with the B3LYP/6-31G(d,p) functional. Besides this, the NLO properties of ETPMP and other already reported crystal TFMOS were explored utilizing the M06/6-31G(d,p) functional of the DFT approach. An excellent agreement was observed between XRD and DFT results of geometric parameters of the above-mentioned crystals. Narrow band gap along with bathochromic shift (3.489 eV and 317.225 nm, respectively) were investigated in TFMOS than that of ETPMP. Owing to these unique properties, TFMOS possesses higher linear (⟨a⟩ = 3.835 × 10-23 esu) and nonlinear (γtot. = 1.346 × 10-34 esu) response as compared to ETPMP. The outcomes explicitly show the higher nonlinearity in TFMOS, highlighting its importance in potential NLO applications.

Designing of banana shaped chromophores via molecular engineering of terminal groups to probe photovoltaic behavior of organic solar cell materials

To meet the rising requirement of photovoltaic compounds for modernized hi-tech purpose, we designed six new molecules (DTPD1-DTPD6) from banana shaped small fullerene free chromophore (DTPR) by structural tailoring at terminal acceptors. Frontier molecular orbitals (FMOs), density of states (DOS), open circuit voltage (Voc), transition density matrix (TDM) analysis, optical properties, reorganization energy value of hole and electron were determined utilizing density function theory (DFT) and time-dependent density function theory (TD-DFT) approaches, to analyze photovoltaic properties of said compounds. Band gap contraction (∆E = 2.717-2.167 eV) accompanied by larger bathochromic shift (λmax = 585.490-709.693 nm) was observed in derivatives contrary to DTPR. The FMOs, DOS and TDMs investigations explored that central acceptor moiety played significant role for charge transformation. The minimum binding energy values for DTPD1-DTPD6 demonstrated the higher exciton dissociation rate with greater charge transferal rate than DTPR, which was further endorsed by TDM and DOS analyses. A comparable Voc (1.49-2.535 V) with respect to the HOMOPBDBT-LUMOacceptor for entitled compounds was investigated. In a nutshell, all the tailored chromophores can be considered as highly efficient compounds for promising OSCs with a good Voc response.

Efficient Synthesis, Spectroscopic Characterization, and Nonlinear Optical Properties of Novel Salicylaldehyde-Based Thiosemicarbazones: Experimental and Theoretical Studies

Currently, we reported the synthesis of six novel salicylaldehyde-based thiosemicarbazones (BHCT1-HBCT6) via condensation of salicylaldehyde with respective thiosemicarbazide. Through various spectroscopic methods, UV-visible and NMR, the chemical structures of BHCT1-HBCT6 compounds were determined. Along with synthesis, a computational study was also performed at the M06/6-31G(d,p) functional. Various analyses such as natural bond orbital (NBO) analysis, natural population analysis, frontier molecular orbital (FMO) analysis, and molecular electrostatic potential surfaces were carried out to understand the nonlinear optical (NLO) characteristics of the synthesized compounds. Additionally, a comparative study was carried out between DFT and experimental results (UV-vis study), and a good agreement was observed in the results. The energy gap calculated through FMOs was found to be in decreasing order as 4.505 (FHCT2) > 4.499 (HBCT6) > 4.497 (BHCT1) = 4.497(HMCT5) > 4.386 (CHCT3) > 4.241(AHCT4) in eV. The global reactivity parameters (GRPs) were attained through E _HOMO and E _LUMO, which described the stability and hardness of novel compounds. The NBO approach confirmed the charge delocalization and stability of the molecules. Among all the investigated compounds, a larger value (557.085 a.u.) of first hyperpolarizability (β_tot) was possessed by CHCT3. The NLO response (β_tot) of BHCT1-HBCT6 was found to be 9.145, 9.33, 13.33, 5.43, 5.68, and 10.13 a.u. times larger than that of the standard para-nitroaniline molecule. These findings ascertained the potential of entitled ligands as best NLO materials for a variety of applications in modern technology.

Synthesis, characterization and exploration of photovoltaic behavior of hydrazide based scaffolds: a concise experimental and DFT study

Solar energy being a non-depleting energy resource, has attracted scientists' attention to develop efficient solar cells to meet energy demands. Herein, a series of hydrazinylthiazole-4-carbohydrazide organic photovoltaic compounds (BDTC1-BDTC7) with an A1-D1-A2-D2 framework was synthesized with 48-62% yields, and their spectroscopic characterization was accomplished using FT-IR, HRMS, ¹H and ¹³C-NMR techniques. Density functional theory (DFT) and time dependent DFT analyses were performed utilizing the M06/6-31G(d,p) functional to calculate the photovoltaic and optoelectronic properties of BDTC1-BDTC7via numerous simulations of the frontier molecular orbitals (FMOs), transition density matrix (TDM), open circuit voltage (V _oc) and density of states (DOS). Moreover, the conducted analysis on the FMOs revealed efficient transference of charge from the highest occupied to the lowest unoccupied molecular orbitals (HOMO → LUMO), further supported by TDM and DOS analyses. Furthermore, the values of binding energy (E _b = 0.295 to 1.150 eV), as well as reorganization energy of the holes (-0.038-0.025 eV) and electrons (-0.023-0.00 eV), were found to be smaller for all the studied compounds, which suggests a higher exciton dissociation rate with greater hole mobility in BDTC1-BDTC7. V _oc analysis was accomplished with respect to HOMO_PBDB-T-LUMO_ACCEPTOR. Among all the synthesized molecules, BDTC7 was found to have a reduced band gap (3.583 eV), with a bathochromic shift and absorption maximum at 448.990 nm, and a promising V _oc (1.97 V), thus it is regarded as a potential candidate for high performance photovoltaic applications.

Effect of different end-capped donor moieties on non-fullerenes based non-covalently fused-ring derivatives for achieving high-performance NLO properties

A series of derivatives (DOCD2-DOCD6) with D-π-A configuration was designed by substituting various efficient donor moieties via the structural tailoring of o-DOC6-2F. Quantum-chemical approaches were used to analyze the optoelectronic properties of the designed chromophores. Particularly, M06/6-311G(d,p) functional was employed to investigate the non-linear optical (NLO) response (linear polarizability ⟨α⟩, first (β_tot) and second ([Formula: see text]_tot) order hyperpolarizabilities) of the designed derivatives. A variety of analyses such as frontier molecular orbital (FMO), absorption spectra, transition density matrix (TDMs), density of states (DOS), natural bond orbital (NBO) and global reactivity parameters (GRPs) were employed to explore the optoelectronic response of aforementioned chromophores. FMO investigation revealed that DOCD2 showed the least energy gap (1.657 eV) among all the compounds with an excellent transference of charge towards the acceptor from the donor. Further, DOS pictographs and TDMs heat maps also supported FMO results, corroborating the presence of charge separation states along with efficient charge transitions. NBO analysis showed that π-linker and donors possessed positive charges while acceptors retained negative charges confirming the D-π-A architecture of the studied compounds. The λ_max values of designed chromophores (659.070-717.875 nm) were found to have broader spectra. The GRPs were also examined utilizing energy band gaps of E_HOMO and E_LUMO for the entitled compounds. Among all the derivatives, DOCD2 showed the highest values of β_tot (7.184 × 10^-27 esu) and [Formula: see text]_tot (1.676 × 10^-31 esu), in coherence with the reduced band gap (1.657 eV), indicating future potentiality for NLO materials.

High-performance non-fullerene acceptor-analogues designed from dithienothiophen [3,2-b]-pyrrolobenzothiadiazole (TPBT) donor materials

CONTEXT

Density functional theory (DFT) method was employed to investigate the electronic structure properties, excited state dynamics, charge transfer, and photovoltaic potential of benzo [1,2,5] thiadiazole fused to 3,7-dimethyl-3a,6,7,7b-tetrahydro-5H-thieno[2',3':4,5]thieno[3,2-b]pyrrole to form 3,9,12,13-tetramethyl-12,13-dihydro-[1,2,5]thiadiazolo[3,4-e]thieno[2″,3″:4,5]pyrrolo[3.2-g]thieno[2',3':4,5]thieno[3,2-b]indole as the acceptor (A), bridge with thiophene as π-spacer to the donor moieties (D) which are 2,3-dihydrobenzo [b]thiophene-6-carboxylic acid (M4) and functionalized R, M1, M2, M3, and M5 to give a D-π-A-π-D. Here is the reverse combination for our molecules: the A-π-D-π-A type of chromophore configuration. It is also observed that tuning the dono-bridge configuration significantly increases the ease of charge transfer as the energy gap decreases in the order of 1.29 eV in M4 < 1.59 eV in M3 < 1.67 eV < 1.99 in M2 and 2.06 eV. The reorganization energy (RE) of M3 (0.0031) and M5 (0.0031) indicates an increase in the order of M3 > M5 > R > M2 > M4 > M1. The HOMO-LUMO indicates that the reactivity decreased, while the stability increased for the reference R at 0.990 eV, compared to the designed molecules M1-M5, with M1 being the least stable at 0.970 eV, while M4 exhibited the highest stability at 1.550 eV. The stability of the designed molecule decreased in the order of M4:1.550 > M3:1.257 > M5:1.197 > M2:1.010 > M1:0.970. Therefore, all results point to the electron-deficient core as an effective end-capped electron acceptor in M1-M5 compounds. As the ideal pair for successfully optimizing optoelectronic properties by reducing the HOMO-LUMO energy levels, reorganization energy, and binding energy and enhancing the absorption maximum and open-circuit voltage values in these designed molecules.

METHODS

DFT and TDDFT calculations were performed with Gaussian 16 program. The modelled compounds were optimized fully using the CAM-B3LYP, WB97XD, B3LYP, and MPW1PW91 functionals with the 6-31 G (d,p) basis set. The graphs for the density of states were plotted using the PyMOlyze software. Other molecular properties like the transition density matrix (TDM) and electron density difference maps (EDD) were rendered via the Multiwfn software.

Designing of gigantic first-order hyperpolarizability molecules via joining the promising organic fragments: a DFT study

A suitable substitution of carbazole with a π-spacer group like cyanoethynylethene offers exciting future opportunities in terms of smart nonlinear optical material. In the quest of better organic nonlinear optical material, we have designed a series of derivatives based on carbazole and cyanoethynylethene fragment combinations in a unique fashion by employing the density functional (DFT) methods. The calculated time-dependent density functional theory (TD-DFT) calculations infer that the gigantic first static hyperpolarizability (β_tot) values are due to a lower energy gap and higher transition dipole moment for the crucial electronic transition. Furthermore, to see the in-depth execution for enhanced second-order nonlinear optics and the structure property relationship on nonlinear optics (NLO) behavior, we have performed frontier molecular orbitals (FMO), density of state (DOS), and transition density matrix (TDM). Furthermore, CAM-B3LYP functional-based calculated results infer that the designed molecule 10 show the first static hyperpolarizability is 923.93 × 10^-30 esu which is 69 times larger than that of p-nitroaniline.

First theoretical framework for highly efficient photovoltaic parameters by structural modification with benzothiophene-incorporated acceptors in dithiophene based chromophores

Now a days, researchers are constantly doing efforts to upgrade the performance of solar based devices with the aim of increasing the role of photovoltaic materials in modern hi-tech optoelectronic applications. Realizing the recent energy conditions across the globe, research is diverted from fullerene to non-fullerene electron acceptor moieties in this era, considering their remarkable contribution in organic solar cells (OSCs). Therefore, we designed seven novel non-fullerene fused ring electron acceptor chromophores (MD2-MD8) from DOC2C6-2F by structural tailoring with different acceptors at end-capped units. DFT study was performed at B3LYP functional to discover the opto-electronic characteristics of the newly tailored chromophores. Various analysis such as frontier molecular orbitals (FMOs), transition density matrix (TDM), density of states (DOS), binding energy (Eb), reorganization energy, open circuit voltage (Voc) was carried out to comprehend the photovoltaic response of MD2-MD8. Decrease in band gaps (1.940-1.571 eV) with wider absorption spectrum (725.690-939.844 nm in chloroform) along with greater charge transfer rate from HOMO towards LUMO were examined in derivatives as compared to MR1 (Egap = 1.976 eV, λmax = 738.221 nm) except MD7. Further, in all derivatives, smaller values of Eb (0.252-0.279 eV) were examined than that of reference (0.296 eV). These lower binding energy values of MD2-MD8 indicated the higher rate of excitation dissociation with lager charger transfer rate than MR1, which further supported by DOS and TDM analyses. Additionally, least reorganization energy in the aforesaid compounds for hole with electron was also inspected. Moreover, Voc a good photovoltaic response was noted for all studied compounds which indicated that these compounds are suitable to synthesize OSCs in future.

First theoretical probe for efficient enhancement of optical nonlinearity via structural modifications into phenylene based D-π-A configured molecules

The design of nonlinear optical (NLO) materials using conjugated molecules via different techniques is reported in the literature to boost the use of these systems in NLO. Therefore, in the current study, designed phenylene based non-fullerene organic compounds with a D-π-A framework were selected for NLO investigation. The initial compound (PMD-1) was taken as a reference and its seven derivatives (PMDC2-PMDC8) were made by introducing different acceptor moieties into the chemical structure of PMD-1. To explain the NLO findings, frontier molecular orbital (FMO), transition density matrix (TDM), density of states (DOS), natural bond orbital (NBO) and UV-Vis study of the title compounds was executed by applying the PBE1PBE functional with the 6-311G(d,p) basis set. The descending order of band gaps (E gap) was reported as PMDC7 (2.656) > PMDC8 (2.485) > PMD-1 (2.131) > PMDC3 (2.103) > PMDC2 (2.079) > PMDC4 (2.065) > PMDC5 (2.059) > PMDC6 (2.004), in eV. Global reactivity parameters (GRPs) were associated with E gap values as PMDC6 with the lowest band gap showed less hardness (0.0368 E h) and high softness (13.5785 E h). The UV-Vis investigation revealed that the maximum λ max (739.542 nm) was exhibited by PMDC6 in dichloromethane (DCM) as compared to other derivatives. Additionally, natural bond orbital (NBO) based findings revealed that PMDC6 exhibited the highest stability value (34.98 kcal mol-1) because of prolonged hyper-conjugation. The dipole moment (μ), average linear polarizability 〈α〉, first hyperpolarizability (β tot) and second hyperpolarizability (γ tot) were evaluated for the reference and its derivatives. Consequently, among the designed compounds, the highest β tot (4.469 × 10-27 esu) and γ tot (5.600 × 10-32 esu) values were shown by PMDC6. Hence, it's concluded from said results that these structural modifications proved PMDC6 as the best second and third order NLO candidate for various applications like fiber optics, signal processing and data storage.

All-small-molecule organic solar cells with high fill factor and enhanced open-circuit voltage with 18.25 % PCE: Physical insights from quantum chemical calculations

All-small-molecule acceptors (ASMAs) are considered as well-defined molecular structures with good sustainability and processability. Although these acceptor molecules did not exhibit high power conversion efficiency (PCE) as compared to polymer solar cells, a lot of research is yet to be focused on the development of ASMAs. In this report, a new series of ASMAs (ZMY1 to ZMY5) has been designed by end-capped alteration of recently synthesized ZR-Si4 molecule (PCE = 10.10%). Photovoltaic, optoelectronic and geometric parameters of the newly designed molecules have been investigated through DFT and TD-DFT approaches. Additionally, power conversion efficiency along with fill factor (FF) percentage has been computed for the designed molecules. Enhanced open circuit voltage (V_oc) allows PCE at around 18.25 % which is better than the experimentally synthesized ZR-Si4 molecule. Additionally, the high mobility of electrons and hole between metal electrodes also suggested that the designed molecules are effective candidates for the development of efficient organic solar cell (OSC) applications.

High electron mobility due to extra π-conjugation in the end-capped units of non-fullerene acceptor molecules: a DFT/TD-DFT-based prediction

A combination of high open-circuit voltage (V_oc) and short-circuit current density (Jsc) typically creates effective organic solar cells (OSCs). To enhance the open-circuit voltage, we have designed three new fullerene-free acceptor molecules with elongated π-conjugation in the end-capped units. Y-series-based newly designed molecules (CPSS-4F, CPSS-4Cl, CPSS-4CN) exhibited a narrow energy bandgap with high electron mobility. Red shift in the absorption spectrum with high intensities is also noted for designed molecules. Low binding and excitation energies of designed molecules favor easy excitation of exciton in the excited state. Further, CPSS-4F, CPSS-4Cl, and CPSS-4CN exhibited better open-circuit voltage with favorable molecular orbitals contributions. Transition density analysis (TDM) was also performed to locate the total transitions in the designed molecules. Outcomes of all analyses suggested that designed molecules are effective contributors to the active layer of organic solar cells.

M, Rehman MFU, Assiri MA, Mashhadi SMA, Akram MS, Lu C. Evaluating Zn-Porphyrin-Based Near-IR-Sensitive Non-Fullerene Acceptors for Efficient Panchromatic Organic Solar Cells

Porphyrin-based non-fullerene acceptors (NFAs) have shown pronounced potential for assembling low-bandgap materials with near-infrared (NIR) characteristics. Herein, panchromatic-type porphyrin-based molecules (POR1-POR5) are proposed by modulating end-capped acceptors of a highly efficient porphyrin-based NFA PORTFIC(POR) for organic solar cells (OSCs). Quantum chemical structure-property relationship has been studied to discover photovoltaic and optoelectronic characteristics of POR1-POR5. Results show that optoelectronic properties of the POR1-POR5 are better in all aspects when compared with the reference POR. All proposed NFAs particularly POR5 proved to be the preferable porphyrin-based NIR sensitive NFA for OSCs applications owing to lower energy gap (1.56 eV), transition energy (1.11 eV), binding energy (Eb =0.986 eV), electron mobility (λe =0.007013Eh ), hole mobility (λh =0.004686 Eh ), high λmax =1116.27 nm and open-circuit voltage (Voc =1.96 V) values in contrast to the reference POR and other proposed NFAs. This quantum chemical insight provides sufficient evidence about excellent potential of the proposed porphyrin-based NIR sensitive NFA derivatives for their use in OSCs.

Deciphering the Role of Alkali Metals (Li, Na, K) Doping for Triggering Nonlinear Optical (NLO) Properties of T-Graphene Quantum Dots: Toward the Development of Giant NLO Response Materials

Nanoscale nonlinear optical (NLO) materials have received huge attention of the scientists in current decades because of their enormous applications in optics, electronics, and telecommunication. Different studies have been conducted to tune the nonlinear optical response of the nanomaterials. However, the role of alkali metal (Li, Na, K) doping on triggering the nonlinear optical response of nanomaterials by converting their centrosymmetric configuration into noncentrosymmetric configuration is rarely studied. Therefore, to find a novel of way of making NLO materials, we have employed density functional theory (DFT) calculations, which helped us to explore the effect of alkali metal (Li, Na, K) doping on the nonlinear optical response of tetragonal graphene quantum dots (TGQDs). Ten new complexes of alkali metal doped TGQDs are designed theoretically. The binding energy calculations revealed the stability of alkali metal doped TGQDs. The NLO responses of newly designed complexes are evaluated by their polarizability, first hyperpolarizability (β_o), and frequency dependent hyperpolarizabilities. The Li@r8a exhibited the highest first hyperpolarizability (β_o) value of 5.19 × 10⁵ au. All these complexes exhibited complete transparency in the UV region. The exceptionally high values of β_o of M@TGQDs are accredited to the generation of diffuse excess electrons, as indicated by NBO analysis and PDOS. NCI analysis is accomplished to examine the nature of bonding interactions among alkali metal atoms and TGQDs. Our results suggest alkali metal doped TGQD complexes as potential candidates for nanoscale NLO materials with sufficient stability and enhanced NLO response. This study will open new doors for making giant NLO response materials for modern hi-tech applications.

Influence of End-Capped Modifications in the Nonlinear Optical Amplitude of Nonfullerene-Based Chromophores with a D-π-A Architecture: A DFT/TDDFT Study

Nonlinear optical (NLO) materials have several uses in many fields such as solid physics, biology, medicine, nuclear physics, and material research. Therefore, a series of nonfullerene-based derivatives (CC10D1-CC10D8) with a D-π-A configuration was planned for the NLO investigation using CC10R as the reference molecule with structural alternations at acceptor moieties. Natural bonding orbital (NBO), UV-vis spectra, frontier molecular orbitals (FMOs), global reactivity parameters (GRPs), transition density matrix (TDM), and density of states (DOS) were analyzed using the M06/6-311G(d,p) functional in chloroform solvent to understand the NLO responses of CC10R and CC10D1-CC10D8. The highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) band gaps of CC10D1-CC10D6 were illustrated to be lower than that of CC10R, with the larger bathochromic shift (726.408-782.674 nm) resulting in a significant NLO response. Along with the band gap, the FMO method also identified an efficient interfacial charge transfer from D to A moieties via a π-bridge, which was further supported by the DOS and TDM map. Moreover, NBO calculations demonstrated that extended hyperconjugation and strong internal molecular interactions were important in their stabilization. The dipole moment (μ), linear polarizability ⟨α⟩, hyperpolarizability (β_total), and second-order hyperpolarizability (γ_total.) were studied for CC10R and CC10D1-CC10D8. Among all of the derivatives, CC10D2 was proven to be the most appropriate candidate because of its suitable NLO behavior such as being well-supported by a reduced band gap (2.093 eV) and having a suitable maximum absorption wavelength (782.674 nm). Therefore, CC10D2 was reported to have a greater value of first hyperpolarizability (208 659.330 a.u.) compared with other derivatives and CC10R. For the second hyperpolarizability, a greater value was obtained for CC10R (5.855 × 10⁷ a.u.), and its derivatives showed results comparable to that of the parent chromophore for γ_total. This theoretical framework reveals that structural customization with different acceptor units plays a significant role in obtaining attractive NLO materials for optoelectronic applications.

Nonfullerene Near-Infrared Sensitive Acceptors "Octacyclic Naphtho[1,2-b:5,6-b] Dithiophene Core" for Organic Solar Cell Applications: In Silico Molecular Engineering

End-capped modification is an efficient approach for enhancing the power conversion efficiency of organic solar cells (OSCs). Herein, five novel acceptor molecules have been designed by end-capper modification of the recently synthesized molecule NTIC (R). Different geometric and photovoltaic properties like frontier molecular orbital analysis, absorption maximum, transition density matrix analysis, reorganizational energy, binding energy, oscillator strength, energy of excitation, and charge transfer analysis of designed and reference molecules have been computed by employing density functional theory and time-dependent density functional theory. Designed molecules expressed a narrow energy band gap (E _g) with red-shifting in the absorption spectrum. Additionally, low excitation and binding energies are also noted in designed molecules. Excellent values of hole and electron reorganizational energies suggested that designed molecules are effective contributors to the development of the active layer of the organic solar cells. Further, a complex study is also performed for evaluation of charge transfer between the acceptor molecule and the donor polymer. Results of all analyses recommended that designed molecules are effective candidates for high-performance organic solar cell applications.

Exploration of the Intriguing Photovoltaic Behavior for Fused Indacenodithiophene-Based A-D-A Conjugated Systems: A DFT Model Study

Many researchers are engaged nowadays in developing efficient photovoltaic materials to accomplish the demand of modern technology. Nonfullerene small molecular acceptors (NF-SMAs) show potential photovoltaic performance, accelerating the development of organic solar cells (OSCs). Herein, the first theoretical designing of a series of indacenodithiophene-based (IDIC1-IDIC6) acceptor chromophores was done by structural tailoring with various well-known acceptors from the recently synthesized IDICR molecule. For the selection of the best level of density functional theory (DFT), various functionals such as B3LYP, M06-2X, CAM-B3LYP, and ωB97XD with the 6-311G(d,p) basis set were used for the UV-visible analysis of IDICR. Consequently, UV-visible results revealed that an interesting agreement was found between experimental and DFT-based values at the B3LYP level. Therefore, quantum chemical investigations were executed at the B3LYP/6-311G(d,p) level to evaluate the photovoltaic and optoelectronic properties. Structural tailoring with various acceptors resulted in a narrowing of the energy gap (2.245-2.070 eV) with broader absorption spectra (750.919-660.544 nm). An effective transfer of charge toward lowest unoccupied molecular orbitals (LUMOs) from highest occupied molecular orbitals (HOMOs) was studied, which played a crucial role in conducting materials. Further, open circuit voltage (V _oc) analysis was performed with respect to HOMO _PBDB-T -LUMO_ACCEPTOR, and all of the derivatives exhibited a comparable value of voltage with that of the parent chromophore. Lower reorganization energies in titled chromophores for holes and electrons were examined, which indicated the higher rate of mobility of charges. Interestingly, all of the designed chromophores exhibited a preferable optoelectronic response compared to the reference molecule. Therefore, this computed framework demonstrates that conceptualized chromophores are preferable and might be used to build high-performance organic solar cells in the future.

Silver cluster doped graphyne (GY) with outstanding non-linear optical properties

This research study addresses the computational simulations of optical and nonlinear optical (NLO) characteristics of silver (Ag) cluster doped graphyne (GY) complexes. By precisely following DFT and TD-DFT hypothetical computations, in-depth characterization of GY@Agcenter, GY@Agside, GY@2Agperpendicular, GY@2Agabove, and GY@3Agcenter is accomplished using CAM-B3LYP/LANL2DZ while the CAM-B3LYP/mixed basis set is used for study of 2GY@Agcenter, 2GY@Agside, 2GY@2Agperpendicular, 2GY@2Agabove, and 2GY@3Agcenter. The effects of various graphyne surface based complexes on hyperpolarizabilities, frontier molecular orbitals (FMOs), density of states (DOS), absorption maximum (λ max), binding energy (E b), dipole moment (μ), electron density distribution map (EDDM), transition density matrix (TDM), electrostatic potential (ESP), vertical ionization energy (E VI) and electrical conductivity (σ) have been investigated. Infrared (IR), non-covalent interaction (NCI) analysis accompanied by isosurface are performed to study the vibrational frequencies and type of interaction. Doping strategies in all complexes impressively reformed charge transfer characteristics such as narrowing band gap (E g) in the range of 2.58-4.73 eV and enhanced λ max lying in the range of 368-536 nm as compared to pure GY with 5.78 eV E g and 265 nm λ max for (GY@Agcenter-GY@3Agcenter). In the case of (2GY@Agcenter-2GY@3Agcenter), when compared to 2GY with 5.58 eV E g and 275 nm absorption, maximum doping techniques have more effectively modified λ max in the region of 400-548 nm and E g, which is in the order of 2.55-4.62 eV. GY@3Agcenter and 2GY@3Agcenter reflected a noteworthy increment in linear polarizability α O (436.90 au) and (586 au) and the first hyperpolarizability β O (5048.77 au) and (17 270 au) because of their lowest excitation energy (ΔE) when studied in comparison with GY (α O = 281.54 and β O = 0.21 au) and 2GY surface (α O = 416 and β O = 0.06 au). Focusing on harmony between the tiny Ag clusters and graphyne surface as well as their influences on NLO properties, graphyne doping using its two-unit cells (2GY) is found to be expedient for the development of future nanoscale devices.

Novel quad-rotor-shaped photovoltaic materials: first example of fused-ring non-fullerene acceptors with proficient photovoltaic properties for high-performance solar cells

Development of novel materials for organic solar cells is a booming area of current research. Fused-ring electron accepters are the potential agents of revolution in organic photovoltaic devices and revealing high efficiency in organic solar cells. This study highlights the novel quad-rotor-shaped molecules as first example of efficient fused-ring non-fullerene acceptor materials with proficient photovoltaic parameters for their utilization in high-performance organic solar cells. First time, eight quad-rotor-shaped fused-ring electron accepters (QRFR-1-QRFR-8) are developed via modulating end-caps of experimentally synthesized (BFTT-TN) molecule (QRFR). Optoelectronic properties of proposed molecules are determined using frontier molecular orbitals (FMO), UV-Visible, density of state (DOS), overlap DOS (ODOS), transition density matrix (TDM) heat maps, open circuit voltage (V_oc), binding energies (E_b), reorganization energy of electron (λ_e), hole (λ_h), charge transfer analysis, and compared with reference QRFR. All proposed fused-ring electron accepters disclose less energy gap and λ_max in near IR region than QRFR after end-capped engineering. Highest V_oc with respect to HOMO_PM6-LUMO_acceptor is found 1.66 V in QRFR-6 than QRFR (1.63 V). E_b values of QRFR-1-QRFR-8 are found better and comparable with QRFR. The λ_e is found smaller than QRFR in all molecules except QRFR-5. The proposed quad-rotor-shaped molecules exhibit proficient photovoltaic features and can serve as best candidate for organic solar cells when blended with PM6 film. This study not only enlightens the researchers to use end-capped reforms as effective tactic for designing materials, but also provides novel quad-rotor-shaped materials to experimentalist for synthesis and their usage in future application of organic solar cells.

Exploration of promising optical and electronic properties of (non-polymer) small donor molecules for organic solar cells

Non-fullerene based organic compounds are considered promising materials for the fabrication of modern photovoltaic materials. Non-fullerene-based organic solar cells comprise of good photochemical and thermal stability along with longer device lifetimes as compared to fullerene-based compounds. Five new non-fullerene donor molecules were designed keeping in view the excellent donor properties of 3-bis(4-(2-ethylhexyl)-thiophen-2-yl)-5,7-bis(2ethylhexyl) benzo[1,2-:4,5-c']-dithiophene-4,8-dione thiophene-alkoxy benzene-thiophene indenedione (BDD-IN) by end-capped modifications. Photovoltaic and electronic characteristics of studied molecules were determined by employing density functional theory (DFT) and time dependent density functional theory (TD-DFT). Subsequently, obtained results were compared with the reference molecule BDD-IN. The designed molecules presented lower energy difference (ΔΕ) in the range of 2.17-2.39 eV in comparison to BDD-IN (= 2.72 eV). Moreover, insight from the frontier molecular orbital (FMO) analysis disclosed that central acceptors are responsible for the charge transformation. The designed molecules were found with higher λmax values and lower transition energies than BDD-IN molecule due to stronger end-capped acceptors. Open circuit voltage (Voc) was observed in the higher range (1.54-1.78 V) in accordance with HOMOdonor-LUMOPC61BM by designed compounds when compared with BDD-IN (1.28 V). Similarly, lower reorganization energy values were exhibited by the designed compounds in the range of λe(0.00285-0.00370 Eh) and λh(0.00847-0.00802 Eh) than BDD-IN [λe(0.00700 Eh) and λh(0.00889 Eh)]. These measurements show that the designed compounds are promising candidates for incorporation into solar cell devices, which would benefit from better hole and electron mobility.

Molecular engineering of indenoindene-3-ethylrodanine acceptors with A2-A1-D-A1-A2 architecture for promising fullerene-free organic solar cells

Considering the increased demand and potential of photovoltaic devices in clean, renewable electrical and hi-tech applications, non-fullerene acceptor (NFA) chromophores have gained significant attention. Herein, six novel NFA molecules IBRD1-IBRD6 have been designed by structural modification of the terminal moieties from experimentally synthesized A2-A1-D-A1-A2 architecture IBR for better integration in organic solar cells (OSCs). To exploit the electronic, photophysical and photovoltaic behavior, density functional theory/time dependent-density functional theory (DFT/TD-DFT) computations were performed at M06/6-311G(d,p) functional. The geometry, electrical and optical properties of the designed acceptor molecules were compared with reported IBR architecture. Interestingly, a reduction in bandgap (2.528-2.126 eV), with a broader absorption spectrum, was studied in IBR derivatives (2.734 eV). Additionally, frontier molecular orbital findings revealed an excellent transfer of charge from donor to terminal acceptors and the central indenoindene-core was considered responsible for the charge transfer. Among all the chromophores, IBRD3 manifested the lowest energy gap (2.126 eV) with higher λmax at 734 and 745 nm in gaseous phase and solvent (chloroform), respectively due to the strong electron-withdrawing effect of five end-capped cyano groups present on the terminal acceptor. The transition density matrix map revealed an excellent charge transfer from donor to terminal acceptors. Further, to investigate the charge transfer and open-circuit voltage (Voc), PBDBT donor polymer was blended with acceptor chromophores, and a significant Voc (0.696-1.854 V) was observed. Intriguingly, all compounds exhibited lower reorganization and binding energy with a higher exciton dissociation in an excited state. This investigation indicates that these designed chromophores can serve as excellent electron acceptor molecules in organic solar cells (OSCs) that make them attractive candidates for the development of scalable and inexpensive optoelectronic devices.

de la Torre A, Khan MU, Raza AR, Kamal GM, Rehman MF, Alam MM, Imran M, Braga AA, Pertino MW. Facile Synthesis of Diversely Functionalized Peptoids, Spectroscopic Characterization, and DFT-Based Nonlinear Optical Exploration

Compounds having nonlinear optical (NLO) characteristics have been proved to have a significant role in many academic and industrial areas; particularly, their leading role in surface interfaces, solid physics, materials, medicine, chemical dynamics, nuclear science, and biophysics is worth mentioning. In the present study, novel peptoids (1-4) were prepared in good yields via Ugi four-component reaction (Ugi-4CR). In addition to synthetic studies, computational calculations were executed to estimate the molecular electrostatic potential, natural bond orbital (NBO), frontier molecular orbital analysis, and NLO properties. The NBO analysis confirmed the stability of studied systems owing to containing intramolecular hydrogen bonding and hyperconjugative interactions. NLO analysis showed that investigated molecules hold noteworthy NLO response as compared to standard compounds that show potential for technology-related applications.

Exploration of efficient electron acceptors for organic solar cells: rational design of indacenodithiophene based non-fullerene compounds

The global need for renewable sources of energy has compelled researchers to explore new sources and improve the efficiency of the existing technologies. Solar energy is considered to be one of the best options to resolve climate and energy crises because of its long-term stability and pollution free energy production. Herein, we have synthesized a small acceptor compound (TPDR) and have utilized for rational designing of non-fullerene chromophores (TPD1-TPD6) using end-capped manipulation in A2-A1-D-A1-A2 configuration. The quantum chemical study (DFT/TD-DFT) was used to characterize the effect of end group redistribution through frontier molecular orbital (FMO), optical absorption, reorganization energy, open circuit voltage (Voc), photovoltaic properties and intermolecular charge transfer for the designed compounds. FMO data exhibited that TPD5 had the least ΔE (1.71 eV) with highest maximum absorption (λmax) among all compounds due to the four cyano groups as the end-capped acceptor moieties. The reorganization energies of TPD1-TPD6 hinted at credible electron transportation due to the lower values of λe than λh. Furthermore, open circuit voltage (Voc) values showed similar amplitude for all compounds including parent chromophore, except TPD4 and TPD5 compounds. These designed compounds with unique end group acceptors have the potential to be used as novel fabrication materials for energy devices.

Structural modulation of π-conjugated linkers in D-π-A dyes based on triphenylamine dicyanovinylene framework to explore the NLO properties

A donor-π-acceptor type series of Triphenylamine-dicyanovinylene-based chromophores (DPMN1-DPMN11) was designed theoretically by the structural tailoring of π-linkers of experimentally synthesized molecules DTTh and DTTz to exploit changes in the optical properties and their nonlinear optical materials (NLO) behaviour. Density functional theory (DFT) computations were employed to understand the electronic structures, absorption spectra, charge transfer phenomena and the influence of these structural modifications on NLO properties. Interestingly, all investigated chromophores exhibited lower band gap (2.22-2.60 eV) with broad absorption spectra in the visible region, reflecting the remarkable NLO response. Furthermore, natural bond orbital (NBO) findings revealed a strong push-pull mechanism in DPMN1-DPMN11 as donor and π-conjugates exhibited positive, while all acceptors showed negative values. Examination of electronic transitions from donor to acceptor moieties via π-conjugated linkers revealed greater linear (〈α〉 = 526.536-641.756 a.u.) and nonlinear (β tot = 51 313.8-314 412.661 a.u.) response. It was noted that the chromophores containing imidazole in the second p-linker expressed greater hyperpolarizability when compared with the ones containing pyrrole. This study reveals that by controlling the type of π-spacers, interesting metal-free NLO materials can be designed, which can be valuable for the hi-tech NLO applications.

A Simple Effective Δ SCF Method for Computing Optical Gaps in Organic Chromophores

Photoluminescence effects in organic chromophores are of significant importance and requires precise description of low lying excited states. In this communication, we put forward an alternative time-independent DFT scheme for computing lowest single-particle excitation energy, especially for singlet excited state. This adopts a recently developed "virial"-theorem based model of singlet-triplet splitting which requires a DFT calculation on closed shell ground state and a restricted open-shell triplet excited state, followed by a simple 2 e - integral evaluation. This produces vertical excitation energies in small molecules, linear and non-linear polycyclic aromatic hydrocarbon and organic dyes in comparable accuracy to the TDDFT. We also explore the functional dependency of present method with three different functionals (B3LYP, wB97X and CAM-B3LYP) for polyenes and linear acenes. A systematic comparison with literature value illustrates the validity and usefulness of the present scheme in determining optical gap with fair computational cost.

Electronic structure theory study of the reactivity and structural molecular properties of halo-substituted (F, Cl, Br) and heteroatom (N, O, S) doped cyclobutane

Cyclobutane and its halo-substituted derivatives and its heteroatom doped derivatives have been extensively investigated in this study because of the vast applications and interesting chemistry associated with them, the vibrational assignments, Natural Bond Orbital (NBO) analysis, Conceptual Density Functional Theory, Quantum Mechanical Descriptors and Molecular Electrostatic Potential (MEP) analysis have been explored in this study. The corresponding wavenumbers of the studied compounds have as well been assigned by Potential Energy Distribution analysis. Several inter and intramolecular hyperconjugative interactions within the studied compounds have been revealed by the NBO analysis with a confirmation of geometric hybridization and electronic occupancy. The compounds reactivity was observed to decrease down the halo group in manners such as the stability, both were observed to decrease from azetidine to thietane. The distribution of charge was observed to be affected by the ring substituent as observed from the charge population analysis; in addition, adjacent atoms are very much affected by the inherent properties of the substituted atoms. The NBO result suggests that the molecules are stabilized by lone pair delocalization of electrons from the substituted atoms and molecular electrostatic potential (MEP) studies revealed that substituted halogens and doped heteroatoms are important and most probable sites of electrostatic interactions.

Synthesis of Diaminopyrimidine Sulfonate Derivatives and Exploration of Their Structural and Quantum Chemical Insights via SC-XRD and the DFT Approach

Two heterocyclic compounds named 2,6-diaminopyrimidin-4-ylnaphthalene-2-sulfonate (A) and 2,6-diaminopyrimidin-4-yl4-methylbenzene sulfonate (B) were synthesized. The structures of heterocyclic molecules were established by the X-ray crystallographic technique, which showed several noncovalent interactions as N···H···N, N···H···O, and C-H···O bonding and parallel offset stacking interaction. Hydrogen-bonding interactions were further explored by the Hirshfeld surface (HS) analysis. Nonlinear optical (NLO) and natural bond orbital (NBO) properties were calculated utilizing the B3LYP/6-311G(d,p) level. Frontier molecular orbitals (FMOs) and molecular electrostatic potential (MEP) were calculated utilizing the time-dependent density functional theory (TD-DFT) at the same level. The NBO analysis showed that the molecular stabilities of compounds A and B were attributed to their large stabilization energy values. The second hyperpolarizability (γ_tot) values for A and B were obtained as 3.7 × 10⁴ and 2.7 × 10⁴ au, respectively. The experimental X-ray crystallographic and theoretical structural parameters of A and B were found to be in close correspondence. Both the molecules reveal substantial NLO responses that can be significant for their utilization in advanced applications.

First theoretical framework of Z-shaped acceptor materials with fused-chrysene core for high performance organic solar cells

Chrysene core containing fused ring acceptor materials have remarkable efficiency for high performance organic solar cells. Therefore, present study has been carried out with the aim to design chrysene based novel Z-shaped electron acceptor molecules (Z1-Z6) from famous Z-shaped photovoltaic material FCIC (R) for organic photovoltaic applications. End-capped engineering at two electron-accepting end groups 1,1-dicyanomethylene-3-indanone of FCIC is made with highly efficient end-capped acceptor moieties and impact of end-capped modifications on structure-property relationship, photovoltaic and electronic properties of newly designed molecules (Z1-Z6) has been studied in detail through DFT and TDDFT calculations. The efficiencies of the designed molecules are evaluated through energy gaps, exciton binding energy along with transition density matrix (TDM) analysis, reorganizational energy of electron and hole, absorption maxima and open circuit voltage of investigated molecules. The designed molecules exhibit red-shift and intense absorption in near-infrared region (683-749 nm) of UV-Vis-NIR absorption spectrum with narrowing of HOMO-LUMO energy gap from 2.31 eV in R to 1.95 in eV in Z5. Moreover, reduction in reorganization energy of electron from 0.0071 (R) to 0.0049 (Z5), and enhancement in open circuit voltage from 1.08 V in R to 1.20 V in Z5 are also observed. Twisted Z-shape of designed molecules prevents self-aggregation that facilitates miscibility of donor and acceptor. Low values of binding energy, excitation energy, and reorganizational energy (electron and hole) suggest that novel designed molecules offer high charge mobilities as compared to FCIC. Our findings indicate that these novel designed molecules can display better photovoltaic parameters and are suitable candidates if used in organic solar cells.

Designing of benzodithiophene core-based small molecular acceptors for efficient non-fullerene organic solar cells

Nowadays, organic solar cells (OSCs) with non-fullerene electron acceptors provide the highest efficiencies among all studied OSCs. To further improve the efficiencies of fullerene-free organic solar cells, end-capped acceptor modification is made with strong electron withdrawing groups. In this report, we have theoretically designed five new novel Benzodithiophene core-based acceptor molecules (H1-H5) with the aim to study the possible enhancement in photophysical, optoelectronic, and photovoltaic properties of newly designed molecules. The end-capped acceptor modification of famous and recently synthesized FBDIC molecule has been made with strong electron withdrawing groups. Density functional theory and time-dependent-density functional theory are extensively used to study the structural-property relationship, optical properties and various geometrical parameters like frontier molecular orbitals alignment, excitation and binding energy, transition density matrix along with open circuit voltage, density of states and dipole moment. Commonly, low reorganization energies (hole and electron) afford high charge mobility and our all designed systems are enriched in aspect (λ_e = 0.0044-0.0104 eV and λ_h = 0.0060-0.0090 eV). Moreover, H1-H5 molecules demonstrate red-shifting in absorption spectrum (λ_max = 741-812 nm) as compare to R (λ_max = 728 nm). Low excitation and binding energies with low HOMO (highest occupied molecular orbital)-LUMO (lowest unoccupied molecular orbital) energy gap of H1-H5 suggested that designed molecules are better and suitable candidates for high performance organic solar cell. Results of all analysis indicate that this theoretical framework demonstrates that end-capped acceptors modification is a simple and effective alternative strategy to achieve the desirable optoelectronic properties. Therefore, H1-H5 are recommended to experimentalist for out-looking future developments of highly efficient solar cells.

Computational study on the optical and NLO properties of donor–acceptor interaction molecules containing a triazolobenzothiadiazole or benzothiadiazole central acceptor core

The nonlinear optical properties of the studied compounds were studied with the aid of DFT calculations.

Exploration of Chromone-Based Thiosemicarbazone Derivatives: SC-XRD/DFT, Spectral (IR, UV-Vis) Characterization, and Quantum Chemical Analysis

By the condensation of thiosemicarbazide with coumarin aldehyde, two novel substituted thiosemicarbazones with chemical formulae C24H25N3O3S (3a) and C26H23N3O3S (3b) have been synthesized. The synthesized compounds were resolved using SC-XRD, and structure elucidation was carried out using 1H NMR, 13C NMR, UV-visible, and FT-IR spectroscopic analyses. Computational calculations at the B3LYP/6-311+G(d,p) level of theory were performed to countercheck the experimental (UV-vis, FT-IR) findings and explore the electronic (FMO, NBO, MEP) properties of 3a-b. The nonlinear optical (NLO) properties of 3a-b were estimated using B3LYP, HF, LC-BLYP, CAM-B3LYP, M062X, and M06 functionals in combination with the 6-311+G(d,p) basis set. The crystallographic data revealed that compounds were crystallized as an orthorhombic crystal lattice with the Pbcn space group and the triclinic crystal lattice with the P̅1 space group. A good concurrence among experimental SC-XRD-generated bond lengths, bond angles, FT-IR, UV-vis, and corresponding DFT results was found, which confirms the purity of both compounds. The NBO analysis confirmed the presence of intramolecular hydrogen bonding and hyperconjugative interactions, which not only were the pivotal cause of stability of the investigated compounds but also led to an overwhelming NLO response. The energy differences calculated for HOMO/LUMO are 3.053 and 3.118 eV in 3a and 3b, respectively. The crystal 3b showed a higher value of first-order polarizability at all levels of theory than 3a. Overall results show that the crystals under investigation are polarized in nature with a good dipole moment. A comparative analysis with urea molecules clearly indicates that the studied compounds are acceptable NLO candidates and they can be used for future technological applications.

In Silico Modeling of New "Y-Series"-Based Near-Infrared Sensitive Non-Fullerene Acceptors for Efficient Organic Solar Cells

This work was inspired by a previous report [Janjua, M. R. S. A. Inorg. Chem. 2012, 51, 11306-11314] in which the optoelectronic properties were improved with an acceptor bearing heteroaromatic rings. Herein, we have designed four novel Y-series non-fullerene acceptors (NFAs) by end-capped acceptor modifications of a recently synthesized 15% efficient Y21 molecule for better optoelectronic properties and their potential use in solar cell applications. Density functional theory (DFT) along with time-dependent density functional theory (TDDFT) at the B3LYP/6-31G(d,p) level of theory is used to calculate the band gap, exciton binding energy along with transition density matrix (TDM) analysis, reorganizational energy of electrons and holes, and absorption maxima and open-circuit voltage of investigated molecules. In addition, the PM6:YA1 complex is also studied to understand the charge shifting from the donor polymer PM6 to the NFA blend. Results of all parameters suggest that the DA'D electron-deficient core and effective end-capped acceptors in YA1-YA4 molecules form a perfect combination for effective tuning of optoelectronic properties by lowering frontier molecular orbital (FMO) energy levels, reorganization energy, and binding energy and increasing the absorption maximum and open-circuit voltage values in selected molecules (YA1-YA4). The combination of extended conjugation and excellent electron-withdrawing capability of the end-capped acceptor moiety in YA1 makes YA1 an excellent organic solar cell (OSC) candidate owing to promising photovoltaic properties including the lowest energy gap (1.924 eV), smallest electron mobility (λe = 0.0073 eV) and hole mobility (λh = 0.0083 eV), highest λmax values (783.36 nm (in gas) and 715.20 nm (in chloroform) with lowest transition energy values (E x) of 1.58 and 1.73 eV, respectively), and fine open-circuit voltage (V oc = 1.17 V) with respect to HOMOPM6-LUMOacceptor. Moreover, selected molecules are observed to have better photovoltaic properties than Y21, thus paving the way for experimentalists to look for future developments of Y-series-based highly efficient solar cells.

Designing Star-Shaped Subphthalocyanine-Based Acceptor Materials with Promising Photovoltaic Parameters for Non-fullerene Solar Cells

Star-shaped three-dimensional (3D) twisted configured acceptors are a type of nonfullerene acceptors (NFAs) which are getting considerable attention of chemists and physicists on account of their promising photovoltaic properties and manifestly promoted the rapid progress of organic solar cells (OSCs). This report describes the peripheral substitution of the recently reported highly efficient 3D star-shaped acceptor compound, STIC, containing a 2-(3-oxo-2,3-dihydroinden-1-ylidene)malononitrile (IC) end-capped group and a subphthalocyanine (SubPc) core unit. The 3D star-shaped SubPc-based NFA compound STIC is peripherally substituted with well-known end-capped groups, and six new molecules (S1-S6) are quantum chemically designed and explored using density functional theory (DFT) and time-dependent DFT (TDDFT). Density of states (DOS) analysis, frontier molecular orbital (FMO) analysis, reorganization energies of electrons and holes, open-circuit voltage, transition density matrix (TDM) surface, photophysical characteristics, and charge-transfer analysis of selected molecules (S1-S6) are evaluated with the synthesized reference STIC. The designed molecules are found in the ambience of 2.52-2.27 eV with a reduction in energy gap of up to 0.19 eV compared to R values. The designed molecules S3-S6 showed a red shift in the absorption spectrum in the visible region and broader shift in the range of 605.21-669.38 nm (gas) and 624.34-698.77 (chloroform) than the R phase values of 596.73 nm (gas) and 616.92 nm (chloroform). The open-circuit voltages are found with the values larger than R values in S3-S6 (1.71-1.90 V) and comparable to R in the S1 and S2 molecules. Among all investigated molecules, S5 due to the combination of extended conjugation and electron-withdrawing capability of end-capped acceptor moiety A5 is proven as the best candidate owing to promising photovoltaic properties including the lowest band gap (2.27 eV), smallest λe = 0.00232 eV and λh = 0.00483 eV, highest λmax values of 669.38 nm (in gas) and 698.77 nm (in chloroform), and highest V oc = 1.90 V with respect to HOMOPTB7-Th-LUMOacceptor. Our results suggest that the selected molecules are fine acceptor materials and can be used as electron and/or hole transport materials with excellent photovoltaic properties for OSCs.