SAS-6 Association with γ-Tubulin Ring Complex Is Required for Centriole Duplication in Human Cells

Mouse SAS-6 is required for centriole formation in embryos and integrity in embryonic stem cells

SAS-6 (SASS6) is essential for centriole formation in human cells and other organisms but its functions in the mouse are unclear. Here, we report that Sass6-mutant mouse embryos lack centrioles, activate the mitotic surveillance cell death pathway, and arrest at mid-gestation. In contrast, SAS-6 is not required for centriole formation in mouse embryonic stem cells (mESCs), but is essential to maintain centriole architecture. Of note, centrioles appeared after just one day of culture of Sass6-mutant blastocysts, from which mESCs are derived. Conversely, the number of cells with centrosomes is drastically decreased upon the exit from a mESC pluripotent state. At the mechanistic level, the activity of the master kinase in centriole formation, PLK4, associated with increased centriolar and centrosomal protein levels, endow mESCs with the robustness in using a SAS-6-independent centriole-biogenesis pathway. Collectively, our data suggest a differential requirement for mouse SAS-6 in centriole formation or integrity depending on PLK4 activity and centrosome composition.

CP110 and CEP135 Localize Near the Proximal Centriolar Remnants of Mice Spermatozoa

Centrioles form centrosomes that organize microtubules, assist in cell structure, and nucleate cilia that provide motility and sensation. Within the sperm, the centrosome consists of two centrioles (proximal and distal centriole) and a pericentriolar material known as the striated column and capitulum. The distal centriole nucleates the flagellum. Mice spermatozoa, unlike other mammal spermatozoa (e.g., human and bovine), have no ultra-structurally recognizable centrioles, but their neck has the centriolar proteins POC1B and FAM161A, suggesting mice spermatozoa have remnant centrioles. Here, we examine whether other centriolar proteins, CP110 and CEP135, found in the human and bovine spermatozoa centrioles are also found in the mouse spermatozoa neck. CP110 is a tip protein controlling ciliogenesis, and CEP135 is a centriole-specific structural protein in the centriole base of canonical centrioles found in most cell types. Here, we report that CP110 and CEP135 were both located in the mice spermatozoa neck around the proximal centriolar remnants labeled by POC1B, increasing the number of centriolar proteins found in the mice spermatozoa neck, further supporting the hypothesis that a remnant proximal centriole is present in mice.

TACC3-ch-TOG interaction regulates spindle microtubule assembly by controlling centrosomal recruitment of γ-TuRC

γ-Tubulin ring complex (γ-TuRC), composed of γ-tubulin and multiple γ-tubulin complex proteins (GCPs), serves as the major microtubule nucleating complex in animal cells. However, several γ-TuRC-associated proteins have been shown to control its function. Centrosomal adaptor protein, TACC3, is one such γ-TuRC-interacting factor that is essential for proper mitotic spindle assembly across organisms. ch-TOG is another microtubule assembly promoting protein, which interacts with TACC3 and cooperates in mitotic spindle assembly. However, the mechanism how TACC3-ch-TOG interaction regulates microtubule assembly and the γ-TuRC functions at the centrosomes remain unclear. Here, we show that deletion of the ch-TOG-binding region in TACC3 enhances recruitment of the γ-TuRC proteins to centrosomes and aggravates spindle microtubule assembly in human cells. Loss of TACC3-ch-TOG binding imparts stabilization on TACC3 interaction with the γ-TuRC proteins and it does so by stimulating TACC3 phosphorylation and thereby enhancing phospho-TACC3 recruitment to the centrosomes. We also show that localization of ch-TOG at the centrosomes is substantially reduced and the same on the spindle microtubules is increased in its TACC3-unbound condition. Additional results reveal that ch-TOG depletion stimulates γ-tubulin localization on the spindles without significantly affecting the centrosomal γ-tubulin level. The results indicate that ch-TOG binding to TACC3 controls TACC3 phosphorylation and TACC3-mediated stabilization of the γ-TuRCs at the centrosomes. They also implicate that the spatio-temporal control of TACC3 phosphorylation via ch-TOG-binding ensures mitotic spindle assembly to the optimal level.

Kinetochore-microtubule attachment in human cells is regulated by the interaction of a conserved motif of Ska1 with EB1

The kinetochore establishes the linkage between chromosomes and the spindle microtubule plus ends during mitosis. In vertebrates, the spindle-kinetochore-associated (Ska1,2,3) complex stabilizes kinetochore attachment with the microtubule plus ends, but how Ska is recruited to and stabilized at the kinetochore-microtubule interface is not understood. Here, our results show that interaction of Ska1 with the general microtubule plus end-associated protein EB1 through a conserved motif regulates Ska recruitment to kinetochores in human cells. Ska1 forms a stable complex with EB1 via interaction with the motif in its N-terminal disordered loop region. Disruption of this interaction either by deleting or mutating the motif disrupts Ska complex recruitment to kinetochores and induces chromosome alignment defects, but it does not affect Ska complex assembly. Atomic-force microscopy imaging revealed that Ska1 is anchored to the C-terminal region of the EB1 dimer through its loop and thereby promotes formation of extended structures. Furthermore, our NMR data showed that the Ska1 motif binds to the residues in EB1 that are the binding sites of other plus end targeting proteins that are recruited to microtubules by EB1 through a similar conserved motif. Collectively, our results demonstrate that EB1-mediated Ska1 recruitment onto the microtubule serves as a general mechanism for the formation of vertebrate kinetochore-microtubule attachments and metaphase chromosome alignment.

γ-Tubulin in microtubule nucleation and beyond

Microtubules composed of αβ-tubulin dimers are dynamic cytoskeletal polymers that play key roles in essential cellular processes such as cell division, organelle positioning, intracellular transport, and cell migration. γ-Tubulin is a highly conserved member of the tubulin family that is required for microtubule nucleation. γ-Tubulin, together with its associated proteins, forms the γ-tubulin ring complex (γ-TuRC), that templates microtubules. Here we review recent advances in the structure of γ-TuRC, its activation, and centrosomal recruitment. This provides new mechanistic insights into the molecular mechanism of microtubule nucleation. Accumulating data suggest that γ-tubulin also has other, less well understood functions. We discuss emerging evidence that γ-tubulin can form oligomers and filaments, has specific nuclear functions, and might be involved in centrosomal cross-talk between microtubules and microfilaments.

Disruption of desmosome function leads to increased centrosome clustering in 14-3-3γ-knockout cells with supernumerary centrosomes

14-3-3 proteins are conserved, dimeric, acidic proteins that regulate multiple cellular pathways. Loss of either 14-3-3ε or 14-3-3γ leads to centrosome amplification. However, we find that while the knockout of 14-3-3ε leads to multipolar mitoses, the knockout of 14-3-3γ results in centrosome clustering and pseudo-bipolar mitoses. 14-3-3γ knockouts demonstrate compromised desmosome function and a decrease in keratin levels, leading to decreased cell stiffness and an increase in centrosome clustering. Restoration of desmosome function increased multipolar mitoses, whereas knockdown of either plakoglobin or keratin 5 led to decreased cell stiffness and increased pseudo-bipolar mitoses. These results suggest that the ability of the desmosome to anchor keratin filaments maintains cell stiffness, thus inhibiting centrosome clustering, and that phenotypes observed upon 14-3-3 loss reflect the dysregulation of multiple pathways.

From tip to toe - dressing centrioles in γTuRC

Centrioles are microtubule-based cylindrical structures that assemble the centrosome and template the formation of cilia. The proximal part of centrioles is associated with the pericentriolar material, a protein scaffold from which microtubules are nucleated. This activity is mediated by the γ-tubulin ring complex (γTuRC) whose central role in centrosomal microtubule organization has been recognized for decades. However, accumulating evidence suggests that γTuRC activity at this organelle is neither restricted to the pericentriolar material nor limited to microtubule nucleation. Instead, γTuRC is found along the entire centriole cylinder, at subdistal appendages, and inside the centriole lumen, where its canonical function as a microtubule nucleator might be supplemented or replaced by a function in microtubule anchoring and centriole stabilization, respectively. In this Opinion, we discuss recent insights into the expanded repertoire of γTuRC activities at centrioles and how distinct subpopulations of γTuRC might act in concert to ensure centrosome and cilia biogenesis and function, ultimately supporting cell proliferation, differentiation and homeostasis. We propose that the classical view of centrosomal γTuRC as a pericentriolar material-associated microtubule nucleator needs to be revised.

Ubiquitin signaling in the control of centriole duplication

The centrosome plays an essential role in maintaining genetic stability, ciliogenesis and cell polarisation. The core of the centrosome is made up of two centrioles that duplicate precisely once during every cell cycle to generate two centrosomes that are required for bipolar spindle assembly and chromosome segregation. Abundance of centriole proteins at optimal levels and their recruitment to the centrosome are tightly regulated in time and space in order to restrict aberrant duplication of centrioles, a phenomenon that is observed in many cancers. Recent advances have conclusively shown that dedicated ubiquitin ligase-dependent protein degradation machineries are involved in governing centriole duplication. These studies revealed intricate mechanistic insights into how the ubiquitin ligases target different centriole proteins. In certain cases, a specific ubiquitin ligase targets a number of substrate proteins that co-regulate centriole assembly, prompting the possibility that substrate-targeting occurs during formation of the sub-centriolar structures. There are also instances where a specific centriole duplication protein is targeted by several ubiquitin ligases at different stages of the cell cycle, suggesting synchronised actions. Recent evidence also indicated a direct association of E3 ubiquitin ligase with the centrioles, supporting the notion that substrate-targeting occurs in the organelle itself. In this review, we highlight these advances by underlining the mechanisms of how different ubiquitin ligase machineries control centriole duplication and discuss our views on their coordination.

Centrosome structure and biogenesis: Variations on a theme?

Centrosomes are composed of two orthogonally arranged centrioles surrounded by an electron-dense matrix called the pericentriolar material (PCM). Centrioles are cylinders with diameters of ~250 nm, are several hundred nanometres in length and consist of 9-fold symmetrically arranged microtubules (MT). In dividing animal cells, centrosomes act as the principal MT-organising centres and they also organise actin, which tunes cytoplasmic MT nucleation. In some specialised cells, the centrosome acquires additional critical structures and converts into the base of a cilium with diverse functions including signalling and motility. These structures are found in most eukaryotes and are essential for development and homoeostasis at both cellular and organism levels. The ultrastructure of centrosomes and their derived organelles have been known for more than half a century. However, recent advances in a number of techniques have revealed the high-resolution structures (at Å-to-nm scale resolution) of centrioles and have begun to uncover the molecular principles underlying their properties, including: protein components; structural elements; and biogenesis in various model organisms. This review covers advances in our understanding of the features and processes that are critical for the biogenesis of the evolutionarily conserved structures of the centrosomes. Furthermore, it discusses how variations of these aspects can generate diversity in centrosome structure and function among different species and even between cell types within a multicellular organism.