Bioaccumulation of metals in ryegrass (Lolium perenne L.) following the application of lime stabilised, thermally dried and anaerobically digested sewage sludge

Extraction of heavy metals from copper tailings by ryegrass (Lolium perenne L.) with the assistance of degradable chelating agents

Heavy metal contamination is an urgent ecological governance problem in mining areas. In order to seek for a green and environmentally friendly reagent with better plant restoration effect to solve the problem of low efficiency in plant restoration in heavy metal pollution soil. In this study, we evaluated the effects of three biodegradable chelating agents, namely citric acid (CA), fulvic acid (FA) and polyaspartic acid (PASP), on the physicochemical properties of copper tailings, growth of ryegrass (Lolium perenne L.) and heavy metal accumulation therein. The results showed that the chelating agent application improved the physicochemical properties of copper tailings, increased the biomass of ryegrass and enriched more Cu and Cd in copper tailings. In the control group, the main existing forms of Cu and Cd were oxidizable state, followed by residual, weak acid soluble and reducible states. After the CA, FA or PASP application, Cu and Cd were converted from the residual and oxidizable states to the reducible and weak acid soluble states, whose bioavailability in copper tailings were thus enhanced. Besides, the chelating agent incorporation improved the Cu and Cd extraction efficiencies of ryegrass from copper tailings, as manifested by increased root and stem contents of Cu and Cd by 30.29-103.42%, 11.43-74.29%, 2.98-110.98% and 11.11-111.11%, respectively, in comparison with the control group. In the presence of multiple heavy metals, CA, FA or PASP showed selectivity regarding the ryegrass extraction of heavy metals from copper tailings. PCA analysis revealed that the CA-4 and PASP-7 treatment had great remediation potentials against Cu and Cd in copper tailings, respectively, as manifested by increases in Cu and Cd contents in ryegrass by 90.98% and 74.29% compared to the CK group.

Copper-uptake mediated by an ecofriendly zwitterionic ionic liquid: A new challenge for a cleaner bioeconomy

This study aims to investigate the ability of an imidazolium biobased Zwitterionic Ionic Liquids (ZILs) in enhancing the phytoavailability of copper from garden (G) and vineyard (V) soils using the model plant ryegrass. Uncontaminated and artificially contaminated CuSO₄ soils, unamended and ZIL-amended soil modalities were designed. The copper/ZIL molar ratio (1/4) introduced was rationally established based on molecular modeling and on the maximal copper concentration in artificially contaminated soil. Higher accumulation of copper in the shoots was detected for the uncontaminated and copper contaminated ZIL amended V soils (18.9 and 23.3 mg/kg, respectively) contrary to G soils together with a ZIL concentration of around 3% (W/W) detected by LC-MS analyses. These data evidenced a Cu-accumulation improvement of 38% and 66% compared to non-amended V soils (13.6 and 13.9 mg/kg respectively). ZIL would be mainly present under Cu(II)-ZIL₄ complexes in the shoots. The impact on the chemical composition of shoot was also studied. The results show that depending on the soils modalitity, the presence of free copper and/or ZIL led to different chemical compositions in lignin and monomeric sugar contents. In the biorefinery context, performances of enzymatic hydrolysis of shoots were also related to the presence of both ZIL and copper under free or complex forms. Ecotoxicity assessment of the vineyard soil samples indicated that the quantity of copper and ZIL remaining in the soils had no significant toxicity. ZIL amendment in a copper-contaminated soil was demonstrated as being a promising way to promote the valorization of phytoremediation plants.

Use of cover crops in vineyards to prevent groundwater pollution by copper and organic fungicides. Soil column studies

Several fungicides, such as copper and organic products (synthetic or natural), are currently being used in vineyards to control downy mildew (Plasmopara viticola) resulting in soil, surface water, and groundwater pollution. This study aims to assess the effectiveness of using cover crops as an agricultural practice in vineyards to protect soil and groundwater pollution. For that purpose, we performed different soil column studies to quantify soil leaching of selected fungicides (copper, dimethomorph, oxathiapiprolin, zoxamide, acibenzolar-s-methyl, and laminarin) following a rainfall event after a conventional fungicide vineyard application. Two types of vineyard soils (loam and sandy-loam soil textures) and three ground covers (bare ground, monoculture cover, and polyculture cover) were assessed. These studies were completed with hydroponic assays to check the effectiveness of cover roots in the fungicide degradation. Mass balance results show that whereas 3 fungicides (Cu, zoxamide, and dimethomorph) were leached through sandy soil columns, only copper was leached from loam soil columns. The effect of cover crops was only significant for Cu and zoxamide when fungicides were applied 24 h before the rain event, reducing the fungicide leaching by 30%. Hydroponic studies showed that cover roots enhanced the kinetic rates of almost all tested fungicides by 5-467%, suggesting that they are relevant to improving the degradation of fungicides in the soil column. These results are relevant to drawing up recommendations on the use of cover crops to protect soil and groundwater pollution by fungicides.

Evaluation of the Use of Sewage Sludge Biochar as a Soil Amendment—A Review

In recent decades, minimization and recycling/reuse policies were introduced to reduce the quantities of generated waste and for alternative waste recovery. Organic wastes represent 46% of total global solid waste. Possible uses of organic wastes include using it as fertilizer and amendment for soil, for energy recovery and for the production of chemical substances. Sewage sludge disposal and reuse are identified as future problems concerning waste. The total amount of sludge generated in the entire world has increased dramatically, and this tendency is expected to increase significantly in the years to come. In most developed countries, special attention is given to sewage sludge treatment in order to improve the quality and safety of using it on the ground surface. Sewage sludge pyrolysis is considered an acceptable method, from an economic and ecological perspective, for the beneficial reuse of sewage sludge. This method has many advantages because, during the pyrolysis process, the sludge volume is reduced by 80%, pathogenic agents and hazardous compounds from sewage sludge are eliminated, metals are immobilized in solid residue and organic and inorganic fractions are immobilized in a stabilized form of pyrolytic residues (biochar). The biochar generated by sewage sludge pyrolysis does not contain pathogenic agents and is rich in carbon and nutrients.

Human health risk assessment of lead (Pb) through the environmental-food pathway

Drinking water and farm-to-fork pathways have been identified as the predominant environmental pathways associated with human exposure (HE) to Pb. This study integrates a GIS-based survey of metal concentrations in soil and a probabilistic quantitative risk assessment of Pb through the food chain. The case study area was selected in the east of Ireland. A step-wise exposure assessment collated the data for Pb concentration in soil and water media, bioaccumulation of Pb in unprocessed food products, such as potatoes, carrots, green vegetables, and salad vegetables. The daily mean HE to Pb through selected food products was found to be 0.073 mg day^-1, where a mean weekly exposure was estimated as 0.0065 mg kg body weight^-1 week^-1. Multiple risk estimates were used. Hazard Quotient (HQ), Daily Dietary Index (DDI), Daily Intake of Metal (DIM), Health Risk Index (HRI), Target Hazard Quotient (THQ) and Cancer Risk (CR) were found as 0.234 to 0.669, 0.002, 0.0002, 0.020 to 0.057, 0.234 to 0.669, and 0.00001, respectively which signify a low to moderate risk. A sensitivity analysis revealed that intake of potato is the most sensitive parameter of the model, which is positively correlated (coeff. + 0.66) followed by concentration of Pb in the arable soil (+0.49), bioaccumulation in tubers (+0.37), consumption of salad vegetables (+0.20), and consumption of green vegetables (+0.13) (top 5). A back-calculated limit of Pb in the soil (51 mg kg^-1) justifies the lower threshold limit of Pb (50-300 mg kg^-1) in agricultural soil set by the European Union to mitigate potential bio-transfer into food products. The study concludes there is a low to moderate risk posed by Pb, within the system boundary of the probabilistic model, and highlights the significance of limiting Pb concentrations in the vegetable producing agricultural soil.

Risk factors and assessment strategies for the evaluation of human or environmental risk from metal(loid)s - A focus on Ireland

Elevated human exposure to metals and metalloids (metal(loid)s) may lead to acute sickness and pose a severe threat to human health. The human body is exposed to metal(loid)s principally through food, water, supplements, and (occasionally) air. There are inherent background levels of many metal(loid)s in regional soils as a consequence of geological sources. Baseline levels coupled with anthropogenic sources such as regional application of biosolids may lead to increased levels of certain metal(loid)s in soil, leading to potential transfer to water sources and potential uptake by plants. The latter could potentially transfer into the feed-to-food chain, viz. grazing animals, and bio-transfer to food products resulting in human exposure. This study addresses health concerns due to excessive intake of metal(loid)s by conducting a traditional review of peer-reviewed journals between 2015 and 2019, secondary references and relevant websites. The review identified the most researched metal(loid)s as Cu, Zn, Pb, Cd, Ni, Cr, As, Hg, Mn, Fe in the environment. The potential uptake of metal(loid)s by plants (phytoavailability) is a function of the mobility/retainability of metal(loid)s in the soil, influenced by soil geochemistry. The most critical parameters (including soil pH, soil organic matter, clay content, cation exchange capacity, the capability of decomposition of organic matter by microbes, redox potential, ionic strength) influencing metal(loid)s in soil are reviewed and used as a foundation to build a framework model for ranking metal(loid)s of concern. A robust quantitative risk assessment model is recommended for evaluating risk from individual metal(loid)s based on health-based indices (Daily Dietary Index (DDI), No Observed Adverse Effect Level (NOAEL), and Lowest Observed Adverse Effect Level (LOAEL)). This research proposes a risk assessment framework for potentially harmful metal(loid)s in the environment and highlights where regulation and intervention may be required.

A GIS study to rank Irish agricultural lands with background and anthropogenic concentrations of metal(loid)s in soil

Heavy metal pollution may cause a serious threat to human health and is a global problem. The bio-availability of metals and metalloids (metal (loid)s) in the soil is a dominating parameter for metal (loid) uptake by plants, and which may subsequently be ingested by individuals through the food pathway. This study aimed to develop a novel approach based on a semi-quantitative probability-impact (P-I) matrix with the help of a GIS mapping tool. ArcGIS was used for data analysis, classification, and reclassification of parameters of the model. Nine influencing parameters were selected for a semi-quantitative risk ranking. These are soil pH, soil organic carbon (SOC), soil texture class, slope, field/soil drainage class, Integrated Risk Quotient (IRQ), proximity to mines, urban activity, and potential biosolids application areas. The results revealed that certain areas (including Co. Louth, Co. Wicklow, Co. Wexford) along the East coast of Ireland pose a higher relative risk. Therefore, in-depth quantitative human health risk assessment is proposed considering the potential bioaccumulation of metal (loid)s if the crops are grown on land with elevated levels of metal (loid)s. Furthermore, this work reveals the usefulness of the GIS mapping techniques in risk assessment to rank areas of elevated levels of potential pollutants.

Analysis of the levels of metal(loid)s in environmental compartments in Ireland towards a screening measure for potential relative risk using open-source datasets

Several metals and metalloids (metal(loid)s) have been identified as potential pollutants. Naturally occurring background levels and anthropogenic sources (direct or indirect) contribute to the baseline concentration of metal(loid)s in the environment. Recorded metal(loid)s in various environmental media (soil, water, sediment) were evaluated from existing databases. The first database is the national soil database or Soil Geochemical Atlas of Ireland (SGAI). The second one is a higher resolution Tellus project database created by the Geological Survey Ireland. This study focussed on 16 metal(loid)s: As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Mo, Ni, Pb, Sb, Sn, U, V, and Zn. A Risk Quotient (RQ) and Integrated Risk Quotient (IRQ) were used to analyse individual and combined effects of selected metal(loid)s due to the potential ingestion by humans through the food chain. The results revealed that in a few locations of Ireland, the predicted environmental concentration (PEC) of As, Cd, Pb and Zn in the soil was higher than the threshold values resulting in an RQ exceedance of 1. The RQ values of metal(loid)s corresponding to the water, and sediment samples suggest minimal exceedance of threshold values. The exceedance of the IRQ values (>2) for the soil, water, and sediment samples is 32.3 %, 14.8 %, and 1.3 %, respectively. Regions along the East coast of Ireland may pose a higher potential relative risk compared to other parts of Ireland. This research suggests the need for in-depth risk assessment studies on Cd, As and Pb, which showed elevated levels. Furthermore, it is essential to understand the fate of metal(loid)s and their risk assessment to inform regulations around metal(loid)s where intervention may be required.

Variation of soil properties with sampling depth in two different light-textured soils after repeated applications of urban sewage sludge

Semi-arid agricultural soils have increasingly been subjected to urban sewage sludge (USS) applications due to accelerated soil depletion and shortages in manure supply. Research studies addressing USS reuse have mostly been conducted in cropping systems and focused on changes in topsoil properties of a given texture. Therefore, sludge-soil interactions could be largely influenced by the presence of plants, soil particle composition and depth. In this field study, two agricultural soils (sandy, S and sandy loam, SL) received simultaneously four annual USS applications of 40, 80, and 120 t ha^-1 year^-1 in absence of vegetation. Outcomes showed the increase of carbon and macronutrients in both soils proportionally to USS dose especially in the topsoil profile (0-20 cm). Subsoil (20-40 cm) was similarly influenced by sludge rates, showing comparable variations of fertility parameters though at significant lower levels. The depth-dependent improvement of soil fertility in both layers enhanced the microbiological properties accordingly, with significant variations in soil SL characterized by a higher clay content than soil S. Besides, positive correlations between increases in sludge dose, salinity, trace metals, and enzyme activities in both soils indicate that excessive sludge doses did not cause soil degradation or biotoxic effects under the described experimental conditions. In particular and despite high geoaccumulation indices of Ni in both soils and profiles, the global concentrations of Cu, Ni, Pb, and Zn were still below threshold levels for contaminated soils. In addition, the maintenance of pH values within neutral range and the increase of organic matter content with respect to control would have further reduced metal availability in amended soils. Therefore, we could closely investigate the effects of texture and depth on the intrinsic resilience of each soil to cope with repetitive USS applications.

Remediation of Chromium-Contaminated Soil Based on Bacillus cereus WHX-1 Immobilized on Biochar: Cr(VI) Transformation and Functional Microbial Enrichment

Microorganisms are applied to remediate chromium (Cr)-contaminated soil extensively. Nevertheless, the microbial loss and growth inhibition in the soil environment restrain the application of this technology. In this study, a Cr(VI)-reducing strain named Bacillus cereus WHX-1 was screened, and the microbial aggregates system was established via immobilizing the strain on Enteromorpha prolifera biochar to enhance the Cr(VI)-reducing activity of this strain. The mechanism of the system on Cr(VI) transformation in Cr-contaminated soil was illuminated. Pot experiments indicated that the microbial aggregates system improved the physicochemical characteristics of Cr-contaminated soil obviously by increasing organic carbon content and cation exchange capacity, as well as decreasing redox potential and bulk density of soil. Moreover, 94.22% of Cr(VI) was transformed into Cr(III) in the pot, and the content of residue fraction Cr increased by 63.38% compared with control check (CK). Correspondingly, the physiological property of Ryegrass planted on the Cr-contaminated soil was improved markedly and the main Cr(VI)-reducing microbes, Bacillus spp., were enriched in the soil with a relative abundance of 28.43% in the microbial aggregates system. Considering more active sites of biochar for microbial aggregation, it was inferred that B. cereus WHX-1 could be immobilized by E. prolifera biochar, and more Cr(VI) was transformed into residue fraction. Cr stress was decreased and the growth of plants was enhanced. This study would provide a new perspective for Cr-contaminated soil remediation.

Impact of urban sewage sludge on soil physico-chemical properties and phytotoxicity as influenced by soil texture and reuse conditions

Urban sewage sludge (USS) is increasingly applied to agricultural soils, but mixed results have been reported because of variations in reuse conditions. Most field trials have been conducted in cropping systems, which conceal intrinsic soil responses to sludge amendments due to the rhizosphere effect and farming practices. Therefore, the current field study highlights long-term changes in bare soil properties in strict relationship with soil texture and USS dose. Two agricultural soils (loamy sand [LS] and sandy [S]) were amended annually with increasing sludge rates up to 120 t ha-1 yr-1 for 5 yr under unvegetated conditions. Outcomes showed a USS dose-dependent variation of all studied parameters in topsoil samples. Soil salinization was the most significant risk related to excessive USS doses. Total dissolved salts (TDS) in saturated paste extracts reached the highest concentrations of 37.2 and 43.1 g L-1 in S soil and LS soil, respectively, treated with 120 t USS ha-1 yr-1 . This was also reflected by electrical conductivity of the saturated paste extract (ECe ) exceeding 4,000 µS cm-1 in both treatments. As observed for TDS, fertility indicators and bioavailable metals varied with soil texture due to the greater retention capacity of LS soil owing to higher fine fraction content. Soil phytotoxicity was estimated by the seed germination index (GI) calculated for lettuce, alfalfa, oat, and durum wheat. The GI was species dependent, indicating different degrees of sensitivity or tolerance to increasing USS rates. Lettuce germination was significantly affected by changes in soil conditions showing negative correlations with ECe and soluble metals. In contrast, treatment with USS enhanced the GI of wheat, reflecting higher salinity tolerance and a positive effect of sludge on abiotic conditions that control germination in soil. Therefore, the choice of adapted plant species is the key factor for successful cropping trials in sludge-amended soils.

Influence of slope aspect on the macro- and micronutrients in Artemisia sacrorum on the Loess Plateau in China

Slope aspect is an important topographic factor for a micro-ecosystem environment that may affect macro- and micronutrients in plants and soil. The south-, northwest-, and north-facing slopes were selected to investigate the influence of slope aspect on the concentrations, storage, and allocation of macro- and micronutrients in Artemisia sacrorum on the Loess Plateau in China. The concentrations of available manganese (Mn) in both rhizosphere and non-rhizosphere soils reached their maximum on the north-facing slope. The concentrations of available iron (Fe) in rhizosphere soil and available copper (Cu) in non-rhizosphere soil reached their maximum on the south-facing slope. Slope aspect significantly affected the total concentrations of potassium (K), calcium (Ca), magnesium (Mg), Cu, and Mn in rhizosphere and non-rhizosphere soils, and all of these elements reached their maximum on the northwest-facing slope. Slope aspect significantly influenced the concentrations of aboveground K, Ca, and Mg, sodium (Na), Mn, and belowground K in A. sacrorum, and the concentrations of aboveground K, Ca, Mg, and Na and belowground Mn, Na, Fe, Ca, and Mg in weed. Most elements in A. sacrorum and the weeds reached their maximum on the south-facing slope. Slope aspect significantly changed the aboveground-to-belowground concentration ratios of K, Ca, and Na in A. sacrorum and weed. Slope aspect significantly affected the storage of macro- and micronutrients in A. sacrorum and weed but not the storage in the plants of the entire plot. Slope aspect predominantly affected the storage allocation of macro- and micronutrients in A. sacrorum but not those in weed. Slope aspect is an important topographic factor that affects the macro- and micronutrients in plants and soil in micro-ecosystem environments.

Carbon mineralization, biological indicators, and phytotoxicity to assess the impact of urban sewage sludge on two light-textured soils in a microcosm

The agricultural reuse of urban sewage sludge (USS) modifies soil properties depending on sludge quality, management, and pedo-environmental conditions. The aim of this microcosm study was to assess C mineralization and subsequent changes in soil properties after USS addition to two typical Mediterranean soils: sandy (Soil S) and sandy loam (Soil A) at equivalent field rates of 40 t ha^-1 (USS-40) and 120 t ha^-1 (USS-120). Outcomes proved the biodegradability of USS through immediate CO₂ release inside incubation bottles in a dose-dependent manner. Accordingly, the highest rates of daily C emission were recorded with USS-120 (3.7 and 3.9 mg kg^-1 d^-1 for Soils S and A, respectively) after 84 d of incubation at 25 °C. The addition of USS also improved soil fertility by enhancing soil macronutrients, microbial proliferation, and protease activity. Protease showed significant correlation with N, total organic C, and heterotrophic bacteria, reflecting the biostimulation and bioaugmentation effects of sludge. Soil indices like C/N/P stoichiometry and metabolic quotient (qCO₂ ) varied mostly with mineralization rates of C and P in both soils. Despite a significant increase of soil salinity and total heavy metal content (lead, nickel, zinc, and copper) with USS dose, wheat germination was not affected by these changes. Both experimental soils showed intrinsic (Soil A) and incubation-induced (Soil S) phytotoxicities that were alleviated by USS addition. This was likely due to the enhancement of biodegradation and/or retention of phytotoxicants originating from previous land uses. Urban sewage sludge amendments could have applications in soil remediation by reducing the negative effects of allelopathic and/or anthropogenic phytoinhibitors.

Potential for phytoremediation of nonylphenol from sewage sludge

Nonylphenol (NP) is considered a major contaminant that must be removed to enable safe and environmentally friendly land application of sewage sludge. Phytoremediation is a technology in which plants are used to remove and/or stabilize organic and inorganic contaminants present in the soil, municipal wastewater, and sewage sludge. In this study, a 391-d large pot experiment was conducted to remove NP from sewage sludge by phytoremediation using Zea mays L. 'Yunshi-5', Lolium perenne L., and co-cropping of the two plants. The fate of NP in the soil under the sewage sludge was assessed at the same time. At the end of the experiment, the NP levels in sludge from the various treatments were as follows: control (38.60%) > L. perenne (31.27%) > Z. mays (16.25%) > co-cropping (15.28%). Degradation followed an availability-adjusted first-order kinetics with a decreasing order of half-lives as follows: control (88.2 d) > L. perenne (87.3 d) > co-cropping (66.2 d) > Z. mays (59.1 d). The results indicated that Z. mays and co-cropping could both degrade NP. The concentrations of NP in tissues of different plants differed significantly. The mean bioconcentration factors for Z. mays and L. perenne were 0.16 and 3.69, respectively. Direct removal of NP from sewage sludge by plant uptake was negligible, as was downward movement of NP in the system. Moreover, NP was not detected in soils in any treatments at harvest.

Review on pulp and paper activated sludge pretreatment, inhibitory effects and detoxification strategies for biovalorization

Biovalorization of pulp and paper activated sludge to value-added products could be an effective alternative to traditional sludge management methods, which tend to pose serious environmental issues. Since pulp and paper activated sludge consists of microbial biomass, cellulose, hemicellulose and lignin and thus, could be subjected to different hydrolysis methods to solubilize sludge solids and release simple sugars to form value-added products by the microbial fermentation process. Hence, different sludge hydrolysis methods have been summarized in this review paper. However, hydrolysis of lignocellulosic materials generates variety of toxic compounds during hydrolysis and causes detrimental effects. Therefore, different toxic compounds and their impact on microorganisms, cellulolytic enzymes and fermentation process have been discussed in detail and recent strategies to counteract the problems of inhibitors have also been briefly explained.

Zn stress facilitates nitrate transporter 1.1-mediated nitrate uptake aggravating Zn accumulation in Arabidopsis plants

Describing the mechanisms of zinc (Zn) accumulation in plants is essential to counteract the effects of excessive Zn uptake in crops grown in contaminated soils. Increasing evidence suggests that there is a positive correlation between nitrate supply and Zn accumulation in plants. However, the role of the primary nitrate transporter NRT1.1 in Zn accumulation in plants remains unknown. In this study, a Zn stress-induced increase in nitrate uptake and an increase in NRT1.1 protein levels in wild-type (Col-0) Arabidopsis plants were measured using microelectrode ion flux and green fluorescent protein (GFP)/β-glucuronidase (GUS) staining, respectively. Both agar and hydroponic cultures showed that mutants lacking the NRT1.1 function in nrt1.1 and chl1-5 (chlorate resistant 1) exhibited lower Zn levels in the roots and shoots of Zn-stressed plants than the wild-type. A lack of NRT1.1 activity also alleviated Zn-induced photosynthetic damage and growth inhibition in plants. Further, we used a rotation system with synchronous or asynchronous uptakes of nitrate and Zn to demonstrate differences in Zn levels between the Col-0 and nrt1.1/chl1-5 mutants. Significantly lower difference in Zn levels were noted in the nitrate/Zn asynchronous treatment than in the nitrate/Zn synchronous treatment. From these results, it can be concluded that NRT1.1 modulates Zn accumulation in plants via a nitrate-dependent pathway.

Spatio-temporal trace element fingerprinting of king scallops (Pecten maximus) reveals harvesting period and location

A rapidly growing human population is increasingly relying on seafood as a source of protein and other essential nutrients. Bivalve shellfish, both from wild populations and aquaculture, will undoubtedly continue to account for a significant portion of overall seafood production, but consumption of such shellfish carries potential health risks. Biotoxins, disease causing organisms and pollution contribute to this risk, as shellfish are indiscriminate, passive filter feeders. While government bodies, industry regulators and producers are capable of managing this risk, counterfeit produce can risk public safety, in turn damaging the reputation of the entire industry. Traceability tools provide a means to uphold food safety standards and mitigate remaining risk to consumers. Here, we show how the use of trace element (TE) signatures in shells and soft tissues of king scallops combined, can predict geographic origin with 100% accuracy. Importantly, we explore the temporal stability of this method, successfully classifying 100% of individuals correctly between two dates just 42 days apart from the same harvesting location. The most important elements in the trace element signatures of the scallops, discriminating between harvesting sites and dates were barium, boron, chromium, lead, manganese, molybdenum and selenium. The traceability tool described here offers a viable method to trace produce to its source, empowering industry regulators, government authorities, aquaculture practitioners and retailers in terms of tracking shellfish throughout the supply chain, which would comply with legislation and boost consumer confidence.

Trace element fingerprinting of blue mussel (Mytilus edulis) shells and soft tissues successfully reveals harvesting locations

Globally, aquaculture products are expected to account for >60% of total seafood produce by 2030. In the European Union, the seafood sector is of considerable economic importance to member states with household spending on seafood produce totalling €54.8 billion in 2016. Within the EU, shellfish aquaculture supports livelihoods and employment in many rural communities throughout the region. Harmful algal blooms pose considerable risk to consumer safety and in turn, stability of the shellfish market. If contaminated produce was to make it to the market the health risk to the public could be considerable, but the damage to the sector through loss of trust in producers would also be significant. Mytilus edulis account for a considerable portion of the aquaculture sector in the Northeast Atlantic. At present, no scientific tool is available to industry regulators, to allow them to trace mussel produce to its source, uphold food safety standards and ensure consumer confidence. The present study uses chemical analysis of shells and soft tissues to classify individual M. edulis to their site of harvest. The use of random forest classification of trace element composition has revealed location specific elemental signatures for all examined sites. This led to the correct classification of 100% of individuals sampled to their respective harvesting locations, including two sites located just 6 km apart within the same bay. The protocol demonstrated here provides the basis for a scientifically driven traceability framework for shellfish produce.

Effects of Wood Ash on Nutrients and Heavy Metal(oid)s Mobility in an Ultisol

Wood ash produced through cellulose manufacturing has agricultural uses due to its neutralizing power, like that of commercial products, in addition to providing key soil nutrients such as Ca, Mg, K, and P. However, this industrial waste can possess heavy metal(oid)s that bioaccumulate in the food chain. The objective of this study was to determine the effect of wood ash (WA) on the physicochemical properties of an Ultisol, the mobility of heavy metal(oid)s (As, Cd, Cr, Pb, and Ni) in the soil-plant-water system, and the nutritional response (N, P, and K) of ryegrass (Lolium perenne L.). The experiment was conducted in pots, under greenhouse conditions, using a completely randomized design. Ryegrass was grown in pots containing mixtures of WA plus soil at 7.5, 15, 30, and 75 g kg⁻¹, commercial lime plus soil at 1.5 g kg⁻¹, and unamended soil as a control. Heavy metal(oid)s were analyzed by inductively coupled plasma optical emission spectrometry (ICP-OES). All WA doses favored an increase in pH and the availability of P, Ca, Mg, Na, K, Cu, and Zn in soil and N, P, and K absorption in ryegrass. WA favored the availability and later absorption of heavy metal(oid)s by ryegrass (staying mainly in the roots). Heavy metal(oid)s mobility in the soil-plant-water system was as follows: Cr > Pb > Ni > As.

Activated charcoal as a capture material for silver nanoparticles in environmental water samples

Silver nanoparticles (AgNPs), due to their antibacterial activity, have been incorporated into numerous consumer products. Their environmental impact however, is currently unclear. Uncertainties surround the concentration, fate, and effects of AgNPs in aquatic environments. This study examined the suitability of activated charcoal as a capture material for AgNPs from water. Samples of 100 ppb AgNPs were initially generated and exposed to activated charcoal for 24 h to examine the ability of charcoal to capture AgNPs. The decrease in Ag concentration was measured using ICP-MS. Following initial investigations, the surface area of the charcoal was increased firstly with a pestle and mortar and secondly by milling the charcoal using a ball mill. The increased surface area of the milled charcoal increased the capture of the AgNPs from 11.9% to 63.6% for the 100 ppb samples. Further investigations were carried out examining the effect on the capture of AgNP concentration (with concentration ranging from 10 to 100 ppb), particle coating and the effect of exposure time to the activated charcoal. The capture of AgNP increased with decreasing concentration. A hydrochloric acid (HCl) leaching procedure was also developed which successfully removed the captured silver allowing the fraction captured by the charcoal to be quantified with an average of 94.8% recovery. The results show that milled activated charcoal, can successfully capture AgNPs from water samples, and that therefore, activated charcoal may prove to be a cost effective material for the remediation of waters impacted by AgNP or other nano-wastes.

Biokinetics of microbial consortia using biogenic sulfur as a novel electron donor for sustainable denitrification

In this study, the biokinetics of autotrophic denitrification with biogenic S⁰ (ADBIOS) for the treatment of nitrogen pollution in wastewaters were investigated. The used biogenic S⁰, a by-product of gas desulfurization, was an elemental microcrystalline orthorhombic sulfur with a median size of 4.69 µm and a specific surface area of 3.38 m²/g, which made S⁰ particularly reactive and bioavailable. During denitritation, the biomass enriched on nitrite (NO₂^-) was capable of degrading up to 240 mg/l NO₂^--N with a denitritation activity of 339.5 mg NO₂^--N/g VSS·d. The use of biogenic S⁰ induced a low NO₂^--N accumulation, hindering the NO₂^--N negative impact on the denitrifying consortia and resulting in a specific denitrification activity of 223.0 mg NO₃^--N/g VSS·d. Besides Thiobacillus being the most abundant genus, Moheibacter and Thermomonas were predominantly selected for denitrification and denitritation, respectively.

Structural characterization and evaluation of municipal wastewater sludge (biosolids) from two rural wastewater treatment plants in East Texas, USA

Wastewater sludge (or) biosolids collected from two rural wastewater treatment plants (NWWTP, LWWTP) in East Texas, USA were characterized and evaluated via inductively coupled plasma optical emission spectrometry, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), thermogravimetric analysis, X-ray diffraction, Fourier transform infrared spectroscopy (FTIR), and ion chromatography. The proximate organic and inorganic compositions and spectroscopic characteristics of sewage sludge were determined. The results show that the concentrations of toxic metals Cd, Cr, Cu, Mo, Ni, Pb, Hg, and Zn meet USEPA guideline recommendations for land applications. Notably, metals concentrations in biosolids from NWWTP (Mn (700 ± 83) > Zn (422.5 ± 35.4 ppm) > Ba (319.5 ± 87 ppm) > Cu (240 ± 27 ppm) > B (107 ± 14 ppm) > V (24 ± 3.3 ppm) > Cr (20 ± 3.3 ppm) > Ni (16.7 ± 2.0 ppm) > Pb (16.8 ± 1.1 ppm) > As (11.99 ± 1.27 ppm) > Co (7.6 ± 0.7 ppm) > Mo (6.4 ± 1.4 ppm) > Hg (0.55 ± 0.24 ppm) > Cd (0.130 ± 0.109 ppm)) and LWWTP follow similar trends. Macro-elements concentrations in LWWTP follow the trend P (19,648 ± 169) > Fe (22,688 ± 2110) > Ca (9372 ± 163) > S (9010 ± 1009) > Al (12,538 ± 2116) > K (3514 ± 550) > Mg (33,370 ± 502) > Na (1511 ± 472). The Br^-, NO₃^-, NO₂^-, F^-, Cl^-, and SO₄^2- concentrations meet USEPA guidelines. Whereas biosolid particle sizes were in the range ~20 μm to 500 μm mineralogical results show quartz and vermiculite to be major constituents with abundancies 12.94%, and 10.87% w/wt, respectively.

Extractability and crop transfer of potentially toxic elements from mediterranean agricultural soils following long-term sewage sludge applications as a fertilizer replacement to barley and maize crops

Sewage sludge is used as a fertilizer replacement in agricultural soils for its chemical properties, such as organic matter content, and for its capability to improve physical soil characteristics like porosity. This is also an appealing disposal option for residue whose production is increasing worldwide. However, there is some concern about the presence of potentially toxic elements (PTEs) that can accumulate in soils and become available for crops. In this work, a study was conducted to evaluate the extractability and crops transfer of thirteen PTEs from soils that had been amended with biosolids each year for 15 years as a regular agricultural practice. The study was conducted with barley (winter cereal) and maize (spring cereal) crops. After this long period, an increase in the amount of Pb, Hg, Zn and Ag in soils amended by biosolids was confirmed. However, it is important to emphasize that the PTE total content in croplands was still far below the thresholds established by US and European regulations. Statistically significant differences were also found between the soils fertilized with biosolids and other treatments compared with the potential phytoavailable amount of Cu, Se, Sb and especially for As and Zn, by a DTPA leaching test. Despite these results, the concentration of PTEs in the barley and maize grains grown in fields repeatedly amended with biosolids was not statistically different from those grown with chemical fertilization, except for As in barley grains. In this case, a significant correlation was found between the DTPA-extractable As content in soils and the total content in grains (r = 0.83).

Changes in the fractionation profile of Al, Ni, and Mo during bioleaching of spent hydroprocessing catalysts with Acidithiobacillus ferrooxidans

Spent hydroprocessing catalysts are known to contain a variety of potentially toxic metals and therefore studies on the bioavailability and mobility of these metals are critical for understanding the possible environmental risks of the spent catalysts. This study evaluates the different chemical fractions/forms of aluminium (Al), nickel (Ni), and molybdenum (Mo) in spent hydroprocessing catalyst and the changes they undergo during bioleaching with Acidithiobacillus ferrooxidans. In the spent catalyst (prior to bioleaching), Al was primarily present in its residual form, suggesting its low environmental mobility. However, Ni comprised mainly an exchangeable fraction, indicating its high environmental mobility. Molybdenum was mainly in the oxidizable form (47.1%), which indicated that highly oxidizing conditions were required to liberate it from the spent catalyst. During bioleaching the exchangeable, reducible and oxidizable fractions of all the metals were leached, whereas the residual fractions remained largely unaffected. At the end of bioleaching process, the metals remaining in the bioleached sample were predominantly in the residual fraction (98.3-99.5%). The 'risk assessment code' (RAC) and I_R analysis also demonstrated that the environmental risks of the bioleached residue were significantly lower compared to the untreated spent catalyst. The results of this study suggest that bioleaching is an effective method in removing the metals from spent catalysts and the bioleached residue poses little environmental risk.

Bioaccumulation of metals in juvenile rainbow trout (oncorhynchus mykiss) via dietary exposure to blue mussels

The potential for metals to bioaccumulate in aquatic species, such as fish, via trophic level transfer was investigated. An in vivo experiment was set up in a flow-through system in which juvenile rainbow trout were fed blue mussels collected from a Class A pristine site and an effluent-impacted river estuary, over a period of 28 days. Selected elements (As, Cd, Cr, Co, Cu, Fe, Pb, Mn, Mo, Ni, Se, Sn, V, Zn) were determined in the mussels and fish tissues (muscle and skin) collected at 0, 14 and 28 days. This study reveals the occurrence of metals in mussels sampled in the Irish marine environment and highlights the bioaccumulation potential of metals in fish tissues via trophic transfer. All 14 monitored metals were determined in the mussels collected from both sites and mussels collected from the effluent-impacted site contained three times more Co, Mo, Sn and V than the mussels collected from the Class A site. Following a 28-day dietary exposure, concentrations of As and Se (fish muscle), and Pb, Se and Zn (fish skin), were significantly greater in fish feeding on contaminated mussels compared to those with a regular fish feed diet. The significance of metal detection and bioaccumulation in the mussel and fish tissues, highlights the potential for metal exposure to humans through the food chain. As fish are recommended as a healthy and nutritious food source, it is important to fully understand metal bioaccumulation in commercially important aquatic species and ensure the safety of human consumers.

The Effects of Nitrogen Addition on the Uptake and Allocation of Macro- and Micronutrients in Bothriochloa ischaemum on Loess Plateau in China

The effects of nitrogen (N) addition on the macro- and micronutrient concentrations, storage, and allocation of Bothriochloa ischaemum (L.) Keng, a native forage plant on the Loess Plateau in China remain unclear. We studied the effects of N addition at 0 (CK), 2.5 (N1), 5.0 (N2), and 10.0 (N3) g N m^-2 y^-1. N addition significantly decreased the available copper (Cu), zinc (Zn), and total Cu concentration, but significantly increased the available iron concentration in the soil. Cu, manganese (Mn), and sodium (Na) concentrations in aboveground tissues and potassium (K), magnesium, and Zn concentrations in belowground tissues significantly increased with N addition. Calcium (Ca) concentrations in belowground tissues decreased significantly. The ratios of above- to belowground Ca, Cu, Zn, and Mn significantly increased with N addition. The maximum ratios appeared at N2 for Cu, Zn, and Mn. The aboveground, belowground, and total biomass storage of studied nutrients significantly changed with N addition, and most attained maximum values under N2 treatment. The storage ratios of above- to belowground Cu, Zn, Mn, and Na attained maximum values at N2. We conclude that N addition significantly, but differentially influence the macro- and micronutrient concentrations and storage in B. ischaemum. B. ischaemum allocated and accumulated increased macro- and micronutrients to its aboveground tissues and exhibited high total storage when the amount of N addition reached 5 g N m^-2 y^-1.

Antimicrobial compounds (triclosan and triclocarban) in sewage sludges, and their presence in runoff following land application

The reuse of treated municipal sewage ('biosolids') on land is an effective method to divert waste away from landfill and to use an alternative, low cost method of fertilisation. While legislation has mainly focused on the control of nutrient and metal application rates to land, other potentially harmful emerging contaminants (ECs) may be present in biosolids. Up to 80% of municipal sewage sludge is reused in agriculture in Ireland, which is currently the highest rate of reuse in Europe. However, unlike other countries, no study has been conducted on the presence of ECs across a range of wastewater treatment plants (WWTPs) in this country. This study evaluated the concentrations of two ECs in sewage sludge, the antimicrobials triclosan (TCS) and triclocarban (TCC), and their presence in surface runoff following land application in controlled rainfall simulation studies. In 16 WWTPs, concentrations of TCS and TCC were 0.61 and 0.08µgg^-1, which is at the lower end of concentrations measured in other countries. The concentrations in runoff post land application were also mainly below the limits of detection (90ngL^-1 for TCS, 6ngL^-1 for TCC), indicating that runoff is not a significant pathway of entry into the environment.

Talitrus saltator as a biomonitor: An assessment of trace element contamination on an urban coastline gradient

This study reports the first ever application of the trace element pollution index (TEPI) along a coastal, urban gradient using trace element concentrations (Ti, Mn, Co, Cu, As, Mo, Ag, Cd, Pb, Cr, Fe, Zn and Se) in the amphipod crustacean Talitrus saltator. Samples were collected from 10 sites in Galway Bay (Ireland) and concentrations of Pb showed the greatest spatial variation, likely due to the proximity of some sites to a former landfill and busy harbour. The TEPI used alongside the quartile method allowed for the assigning of sites to contamination level categories. Mapping these class levels allowed for straightforward visualisation of trace element contamination along the urban gradient. In addition, this study presents trace elements levels in T. saltator form the Atlantic Coast of Europe for the first time and the concentrations observed were comparatively lower than previously reported for T. saltator from the Baltic and Mediterranean seas.

Comparison of total and aqua regia extractability of heavy metals in sewage sludge: The case study of a certified reference material

A number of different digestion methods, including aqua regia extraction following two ISO guides were used in an inter-laboratory comparison study. The results obtained showed comparable values for the total and aqua regia extractable content of As, Cu, Fe, Hg, Pb and Zn, while Cd, Co and Cr results were about 10% lower when aqua regia was employed. This small difference was covered by the between-laboratory relative standard deviation of the measurements; therefore in this study no difference in the extraction of the elements by the employed methods was found. The high organic matter content, together with low SiO₂ and refractory aluminium and iron oxide amount as well as the small particle size of the sewage sludge material was reputed to have an effect on the extracting capacity of a weaker solvent such as aqua regia, bringing its results close to the total content ones.

•

The use of sewage sludge as agricultural fertiliser is regulated in most countries and in particular in Europe by the Directive 86/278/EEC (1986).

•

Total and aqua regia extractable content of 11 elements were determined in sewage sludge through an inter-laboratory comparison study.

•

Total and aqua regia extractable content were comparable within the between-laboratory relative standard deviation of the measurements.

•

The extractability of the elements related to the amount of refractory oxide, organic matter content and small particle size of the sample matrix.