Optimized terbium doped Ti/PbO2 dimensional stable anode as a strong tool for electrocatalytic degradation of imidacloprid waste water

High-efficiency Ti/TiO2-NTA/PbO2-Nd anode electrochemical oxidation of coking reverse osmosis concentrated (ROC)

In this study, a Ti/TiO2-NTA/PbO2-Nd anode was fabricated for the treatment of coking reverse osmosis concentrate (ROC). The TiO2-NTA interlayer reduced β-PbO2 grain size and increased the PbO2 surface area. Compared to the conventional Ti/PbO2 electrode, the Ti/TiO2-NTA/PbO2-Nd anode demonstrated enhanced electrochemical performance, including higher oxygen evolution potential (OEP), improved hydroxyl radical (•OH) generation, reduced charge transfer resistance, and longer service life. Under optimal conditions (20 mA/cm2, pH 6), COD and TOC removal efficiencies reached 88.0 % and 70.8 %, respectively, with high degradation efficiency, current efficiency, and low energy consumption (0.23 kWh/g COD). The degradation followed pseudo-first-order kinetics. Reactive oxygen species contributions to ROC degradation were identified through quenching experiments. Recyclability tests (6 and 80 cycles) and accelerated service life tests confirmed the anode's excellent performance and stability. 3D EEM and GC-MS analysis further demonstrated the effective removal of refractory organics from ROC. These results highlight its potential for long-term wastewater treatment applications.

Rerouting charge transfer for pharmaceutical wastewater electrochemical treatment via interfacial cocatalyst modification

Electrochemical oxidation stands as a pivotal technology for refractory wastewater treatment. However, the high cost and low elemental abundance of commercial electrodes limit its widespread application. This work tries to address this by introducing a charge-transfer rerouting strategy via cocatalyst modification using earth-abundant elements. Here, we uncover the role of the cocatalyst in enhancing electrode performance. The in-situ reconstructed cocatalyst induces a substantial rerouting of the charge transfer pathway, facilitating the mass/charge transfer of organics while concurrently suppressing the oxygen evolution side reaction. The Ti-Fe2O3 electrode, loaded with the cocatalyst PbO2, exhibits both high current efficiency (∼45.4 %) and low energy requirement (∼31.8 kW h kg-1 COD), surpassing other reported electrodes and displaying great versatility in various scenarios with good stability and reusability. Moreover, this charge-transfer rerouting strategy holds promise for synergy with other methodologies, such as nanostructure engineering and molecular imprinting, to further enhance the reactivity and selectivity of electrocatalysts in environment and energy-related domains.

Oxidative treatment of micropollutants present in wastewater: A special emphasis on transformation products, their toxicity, detection, and field-scale investigations

Micropollutants have become ubiquitous in aqueous environments due to the increased use of pharmaceuticals, personal care products, pesticides, and other compounds. In this review, the removal of micropollutants from aqueous matrices using various advanced oxidation processes (AOPs), such as photocatalysis, electrocatalysis, sulfate radical-based AOPs, ozonation, and Fenton-based processes has been comprehensively discussed. Most of the compounds were successfully degraded with an efficiency of more than 90%, resulting in the formation of transformation products (TPs). In this respect, degradation pathways with multiple mechanisms, including decarboxylation, hydroxylation, and halogenation, have been illustrated. Various techniques for the analysis of micropollutants and their TPs have been discussed. Additionally, the ecotoxicity posed by these TPs was determined using the toxicity estimation software tool (T.E.S.T.). Finally, the performance and cost-effectiveness of the AOPs at the pilot scale have been reviewed. The current review will help in understanding the treatment efficacy of different AOPs, degradation pathways, and ecotoxicity of TPs so formed.

Bimetal-oxide (Fe/Co) modified bagasse-waste carbon coated on lead oxide-battery electrode for metronidazole removal

Current study covers the preparation and application of a commercial modified lead oxide battery electrode (LBE) in electrochemical oxidation (ECO) of metronidazole (MNZ) in an aqueous phase. Modified electrode is prepared by doping of bimetal-oxide (Fe and Zn) nanoparticles (NPs) & single metal-oxide (Fe/Zn) on bagasse-waste carbon (bwc) which is further coated on LBE. The modified LBE electrode surface was examined for metal-oxide NPs through X-ray diffraction analysis (XRD). Different electrodes are prepared by varying combinations of two metal-oxide based on molar ratio and tested for electrochemical characterization and MNZ removal test. Based on large oxygen evolution potential in a linear sweep volumetry (LSV) analysis and high MNZ removal rate, the best electrode has been represented as Fe1:Co2-bwc/LBE which contains Fe & Co molar ratio of 1:2. Moreover, equilibrium attained at faster rate in degradation process of MNZ, where pseudo first order kinetics of 2.29 × 10-2 min-1 was obtained under optimized condition of (MNZ:100 mg/L, pH:7, CD: 30 mA/cm2 and electrolyte: 0.05 M Na2SO4). Maximum MNZ removal, total organic carbon removal (TOC), mineralization current efficiency (MCE) & energy consumption (EC) of 98.7%, 85.3%, 62.2% & 96.143 kW h/kg-TOC removed are found in 180 min of treatment time for Fe1:Co2-bwc/LBE electrode. Accelerated service life test confirms that the stability of modified electrode is enhanced by 1.5 times compared to pristine LBE. Repeatability test confirms that modified LBE (Fe1:Co2-bwc/LBE) can be utilized up to 3 times.

Fabrication of nanofibrous PbO2 electrode embedded with Pt for decomposition of organic chelating agents

A new fabrication method of nanofibrous metal oxide electrode comprising Pt nanofiber (Pt-NF) covered with PbO2 on a Ti substrate was proposed. Pt-NF was obtained by performing sputtering deposition of Pt on the surface of electrospun poly(vinyl alcohol) (PVA) nanofiber on a Ti substrate, in which PVA was then removed by calcination (Ti/Pt-NF). Subsequently, by introducing PbO2 to the Ti/Pt-NF using the electrodeposition method, a nanofibrous Ti/Pt-NF/PbO2 electrode was finally obtained. Because the Ti substrate was covered by nanofibrous Pt, it had no environmental exposure and thus, was not oxidized during calcination. The crystal structure of the PbO2 mainly consisted of β-form rather than α-form; the β-form was suitable for electrochemical decomposition and remained stable even after 20 h of use. The nanofibrous Ti/Pt-NF/PbO2 electrodes showed 10% lower anode potential, 1.6 times higher current density at water decomposition potential, lower electrical resistance in the ion charge transfer resistance, and 2.27 times higher electrochemically active surface area than those of a planar-type Ti/Pt/PbO2 electrode, and demonstrated excellent electrochemical performance. As a result, compared with the planar electrode, the Ti/Pt-NF/PbO2 electrode showed more effective electrochemical decomposition toward nitrilotriacetic acid (80%) and ethylenediaminetetraacetic acid (83%), which are commonly used as chelating agents in nuclear decontamination.

Y-mediated optimization of 3DG-PbO2 anode for electrochemical degradation of PFOS

In our previous study, the three-dimensional graphene-modified PbO2 (3DG-PbO2) anode was prepared for the effective degradation of perfluorooctanesulfonat (PFOS) by the electrochemical oxidation process. However, the mineralization efficiency of PFOS at the 3DG-PbO2 anode still needs to be further improved due to the recalcitrance of PFOS. Thus, in this study, the yttrium (Y) was doped into the 3DG-PbO2 film to further improve the electrochemical activity of the PbO2 anode. To optimize the doping amount of Y, three Y and 3DG codoped PbO2 anodes were fabricated with different Y3+ concentrations of 5, 15, and 30 mM in the electroplating solution, which were named Y/3DG-PbO2-5, Y/3DG-PbO2-15 and Y/3DG-PbO2-30, respectively. The results of morphological, structural, and electrochemical characterization revealed that doping Y into the 3DG-PbO2 anode further refined the β-PbO2 crystals, increased the oxygen evolution overpotential and active sites, and reduced the electron transfer resistance, resulting in a superior electrocatalytic activity. Among all the prepared anodes, the Y/3DG-PbO2-15 anode exhibited the best activity for electrochemical oxidation of PFOS. After 120 min of electrolysis, the TOC removal efficiency was 80.89% with Y/3DG-PbO2-15 anode, greatly higher than 69.13% with 3DG-PbO2 anode. In addition, the effect of operating parameters on PFOS removal was analyzed by response surface, and the obtained optimum values of current density, initial PFOS concentration, pH, and Na2SO4 concentration were 50 mA/cm2, 12.21 mg/L, 5.39, and 0.01 M, respectively. Under the optimal conditions, the PFOS removal efficiency reached up to 97.16% after 40 min of electrolysis. The results of the present study confirmed that the Y/3DG-PbO2 was a promising anode for electrocatalytic oxidation of persistent organic pollutants.

Decolorization, COD and turbidity removal of the raw vinasse effluent by a one-step electro-oxidation process on a Pb/PbO2 anode

In this research, and for the first time, the application of anode Pb/PbO2 (prepared from combined thermal oxidation and electrochemical oxidation method) and steel cathode in a flow sample electrochemical treatment process of vinasse and in the wastewater of alcohol factories, has been investigated. The combination of electrodes of Pb/PbO2 as an anode, steel, and/or graphite as a cathode was used in the proposed electrochemical treatment setup. The efficiency of the proposed electrochemical treatment was determined by the removal percentage of chemical oxygen demand (COD), turbidity and color of vinasse samples. The response surface method (RSM) by Minitab 18 was used to determine the effect of the studied factors as well as to detect the relationship between variables. The results showed that under optimum conditions (Pb/PbO2 electrode as the anode and steel electrode as the cathode, a voltage of 30 V, pH 6.5, and reaction time of 45 min), the percentage reduction values of COD, turbidity and color were 97.7, 77.3 and 92.7%, respectively.

Electro-Chemical Degradation of Norfloxacin Using a PbO2-NF Anode Prepared by the Electrodeposition of PbO2 onto the Substrate of Nickel Foam

A novel three-dimensional network nickel foam/PbO2 combination electrode (PbO2-NF) with high electrochemical degradation efficiency to norfloxacin was successfully fabricated through the electrodeposition of PbO2 on the substrate of nickel foam. The characterization of an PbO2-NF electrode, including surface morphology, elemental components, electrochemical performance, and stability was performed. In electrochemical oxidation tests, the removal efficiency of norfloxacin (initial concentration for 50 mg/L) on PbO2-NF reached 88.64% within 60 min of electrolysis, whereas that of pure nickel foam was only 30%. In the presence of PbO2-NF, the optimum current density, solution pH, electrode spacing for norfloxacin degradation were 30 mA/cm2, 11, and 3 cm, respectively. The electric energy consumption for 80% norfloxacin was approximately 5 Wh/L. Therefore, these results provide a new anode to improve the removal of norfloxacin in the wastewater with high efficiency and low energy consumption.

Application of sono-electrocoagulation in arsenic removal from aqueous solutions and the related human health risk assessment

Among the contaminants found in groundwater, arsenic poses a great threat to human health and the ecosystem. Therefore, it is vital to eliminate arsenic from water sources. This study utilizes one of the most efficient and emerging decontamination techniques known as the sono-electrocoagulation method. In recent years, sono-electrocoagulation has attracted many scientists due to its unique features, such as being cost-effective, rapid process, and high efficiency. The required groundwater samples were artificially synthesized in the laboratory, where the anode and cathode were determined to be Fe, Ti/PbO2, and Al, respectively. During the experiment, the impact of pH (5,6,7,8), various initial concentrations (100, 200, 300,400, 500, 600 μg/l), exposure times of 5,10,15,20,25 min, electrode distances of 1.5,2,2.5,3,3.5 cm and different current intensities of 5,10,15,20,25 mA/cm2 were examined. The ambient temperature of the laboratory was kept at 30 and 40 °C. Furthermore, this study showed that the system containing Ti/PbO2 as the anode and Al as the cathode electrodes removed arsenic contamination more effectively in the base environment. The performance of arsenic removal was directly related to current intensity, pH, and time. Nevertheless, time elapse played a negative factor due to the corrosion of the electrodes' surface and the dissolution of floating materials in the solution. With the surge of arsenic concentration from 100 to 300 mg/L, the arsenic removal efficiency increased from 61.9 to 98.5 percent, where the maximum removal efficiency due to the rise of the current intensity was 84.16 percent. The sono-electrocoagulation method reduced the risk of carcinogenic and non-carcinogenicity from 5.15E-03 to 7.73E-05 and 26.71 to 0.40. Accordingly, it was found that a combination of ultrasonic and electrocoagulation processes is a promising approach for arsenic removal.

Electrochemical oxidation of sulfamethoxazole by nitrogen-doped carbon nanosheets composite PbO2 electrode: Kinetics and mechanism

In this study, nitrogen-doped carbon nanosheets (NCNSs) were prepared and successfully combined into the PbO₂ electrode by the composite electrodeposition technology, thereby NCNS-PbO₂ electrode was obtained. The electrochemical degradation of sulfamethoxazole (SMX) in aqueous solution by NCNS-PbO₂ electrode was studied. The main influence factors on the degradation of SMX, such as the initial concentration of SMX, current density, electrolyte concentration and initial pH value, were analyzed in detail. Under the optimal process conditions, after 120 min of treatment, the removal ratio of SMX and chemical oxygen demand (COD) reached 99.8 % and 60.7 %, respectively. The results showed that the electrochemical degradation of SMX fitted pseudo-first-order reaction kinetics. The electrochemical performance of NCNS-PbO₂ electrode was better than that of PbO₂ electrode by scanning electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy, as well as the use of cyclic voltammetry and electrochemical impedance spectroscopy for electrochemical performance testing. This was because the doping of nitrogen atoms improved the properties of carbon nanosheets. After the composite, the active sites on the surface of PbO₂ were improved, the particle size of PbO₂ was reduced, and the electrical conductivity and electrocatalytic activity of the electrode were improved. In addition, the intermediate products were determined by GC-MS method, and the possible degradation pathways of SMX were proposed.

Current progress in electrochemical anodic-oxidation of pharmaceuticals: Mechanisms, influencing factors, and new technique

Various pharmaceuticals have been detected in natural water and wastewater bodies, causing threats to water ecosystem and human health. Although electrochemical anodic-oxidation (EAO) has been shown to be efficient for pharmaceuticals degradation from aqueous solution, it still has a distinct need to apply EAO technology for pharmaceuticals removal rationally. This review provides the most recent progress on the mechanisms, influencing factors, and new technique of EAO for pharmaceuticals degradation. The mechanism and superiority of EAO were analyzed. Major influencing factors (e.g., electrode materials, electrochemical reactor, applied current density, anode-cathode distance, electrolyte type and concentration, initial solution pH value, and initial pharmaceuticals concentration) were discussed on the removal of pharmaceuticals. The latest development of reactive electrochemical membranes (REM) was regarded as an emerging EAO technique, and it was also highlighted. This work revealed that the EAO of pharmaceuticals has extraordinary application prospects in the field of water and wastewater treatment.

Electrocatalytic degradation of diuron herbicide using three-dimensional carbon felt/β-PbO2 anode as a highly porous electrode: Influencing factors and degradation mechanisms

Traditional planar PbO₂ anodes have been used extensively for the electrocatalytic degradation process. However, by using porous PbO₂ anodes that have a three-dimensional architecture, the efficiency of the process can be significantly upgraded. In the current study, carbon felt (CF) with a highly porous structure and a conventional planar graphite sheet (G) were used as electrode substrate for PbO₂ anodes. Both CF/β-PbO₂ and G/β-PbO₂ anodes were prepared by the anodic deposition method. The main properties of the electrodes were characterized by XRD, EDX-mapping, FESEM, and BET-BJH techniques. The electrocatalytic degradation of diuron using three-dimensional porous CF/β-PbO₂ anode was modeled and optimized by a rotatable central composite design. After optimizing the process, the ability of porous CF/β-PbO₂ and planar G/β-PbO₂ anodes to degrade and mineralize diuron was compared. The electrocatalytic degradation of the diuron was well described by a quadratic model (R² > 0.99). Under optimal conditions, the kinetics of diuron removal using CF/β-PbO₂ anode was 3 times faster than the G/β-PbO₂ anode. The energy consumed for the complete mineralization of diuron using CF/β-PbO₂ anode was 2077 kWh kg^-1 TOC. However, the G/β-PbO₂ anode removed only 65% of the TOC by consuming 54% more energy. The CF/β-PbO₂ had more stability (115 vs. 91 h), larger surface area (1.6287 vs. 0.8565 m² g^-1), and higher oxygen evolution potential (1.89 vs. 1.84 V) compared to the G/β-PbO₂. In the proposed pathways for diuron degradation, the aromatic ring and groups of carbonyl, dimethyl urea, and amide were the main targets for HO^• radical attacks.

Imidacloprid elimination by O3 and O3/UV: kinetics study, matrix effect, and mechanism insight

The removal of imidacloprid (IMI) from water by ozonation (O3) and photo-ozonation (O3/UV) was comparatively studied, paying particular attention to the kinetics, matrix effect, and mechanistic aspects of the processes. The IMI removal by O3 was considerably enhanced at alkaline pHs, leading to almost complete removal under 20 min with a pseudo-first-order rate constant of 0.2374 min-1 at pH 8.25. Three different matrices, Milli-Q water, full-scale vacuum rotating membrane bioreactor plant effluent (VRMBR WW), and laboratory-scale instantaneous fed-batch reactor bioreactor effluent (Bio WW) spiked with IMI, were tested. The ozonation, coupled with UV, improved IMI removal remarkably regardless of the wastewater matrix, and there occurred a six times decrease in ozonation time requirement for 99% IMI elimination at pH 7.25. The IMI degradation mechanism proved that IMI is an ozone-resistant pollutant and is mainly degraded by OH• via an indirect mechanism. The second-order rate constants for IMI degradation with OH• were calculated as 2.23 × 1011 and 9.08 × 1011 M-1 s-1 for the O3 alone and O3/UV processes, respectively. The IMI degradation pathway analysis showed that IMI lost NO2, HNO2, and then Cl- from its structure, and the O3/UV process yielded fewer by-products than O3.

Co/Sm-modified Ti/PbO2 anode for atrazine degradation: Effective electrocatalytic performance and degradation mechanism

In this work, Ti/PbO₂-Co-Sm electrode has been successfully prepared using electrodeposition and further applied for the electrocatalysis of atrazine (ATZ) herbicide wastewater. As expected, Ti/PbO₂-Co-Sm electrode displays highest oxygen evolution potential, lowest charge transfer resistance, longest service lifetime and most effective electrocatalytic activity compared with Ti/PbO₂, Ti/PbO₂-Sm and Ti/PbO₂-Co electrodes. Orthogonal and single factor experiments are designed to optimize the condition of ATZ degradation. The maximum degradation efficiency of 92.6% and COD removal efficiency of 84.5% are achieved in electrolysis time 3 h under the optimum condition (current density 20 mA cm^-2, Na₂SO₄ concentration 8.0 g L^-1, pH 5 and temperature 35 °C). In addition, Ti/PbO₂-Co-Sm electrode exhibits admirable recyclability in degradation progress. The degradation of ATZ is accomplished by indirect electrochemical oxidation and ∙OH is tested as the main active substance in ATZ oxidation. The possible degradation mechanism of ATZ has been proposed according to the degradation intermediates detected by LC-MS. This research suggests that Ti/PbO₂-Co-Sm is a promising electrode for ATZ degradation.

Assessing the effects of elevated ozone on physiology, growth, yield and quality of soybean in the past 40 years: A meta-analysis

Soybean (Glycine max) production is seriously threatened by ground-level ozone (O₃) pollution. The goal of our study is to summarize the impacts of O₃ on physiology, growth, yield, and quality of soybean, as well as root parameters. We performed meta-analysis on the collated 48 peer-reviewed papers published between 1980 and 2019 to quantitatively summarize the response of soybean to elevated O₃ concentrations ([O₃]). Relative to charcoal-filtered air (CF), elevated [O₃] significantly accelerated chlorophyll degradation, enhanced foliar injury, and inhibited growth of soybean, evidenced by great reductions in leaf area (-20.8%), biomass of leaves (-13.8%), shoot (-22.8%), and root (-16.9%). Shoot of soybean was more sensitive to O₃ than root in case of biomass. Chronic ozone exposure of about 75.5 ppb posed pronounced decrease in seed yield of soybean (-28.3%). In addition, root environment in pot contributes to higher reduction in shoot biomass and yield of soybean. Negative linear relationships were observed between yield loss and intensity of O₃ treatment, AOT40. The larger loss in seed yield was significantly associated with higher reduction in shoot biomass and other yield component. This meta-analysis demonstrates the effects of elevated O₃ on soybean were pronounced, suggesting that O₃ pollution is still a soaring threat to the productivity of soybean in regions with high ozone levels.

Fabrication of a multi-layer CNT-PbO2 anode for the degradation of isoniazid: Kinetics and mechanism

In this study, the CNTs were successfully compounded in PbO₂ electrode through composite electrodeposition technology to obtain multi-layer CNT-PbO₂ electrode. Scanning electron microscope, X-ray diffraction and X-ray Photoelectron Spectroscopy were comprehensively used to characterize the lead dioxide electrode and the electrochemical performance were also tested by cyclic voltammetry, and electrochemical impedance spectroscopy. Results showed that CNT-PbO₂ significantly improved the electrochemical performance, which was attributed to that the compound of CNTs in PbO₂ improved the active sites on the surface, with higher oxidation peaks, smaller particle size, larger specific surface area, and lower charge transfer resistance. In the degradation experiment, the chemical oxygen demand removal efficiency of isoniazid by CNT-PbO₂ electrode were 1.37 times of that by pure PbO₂ electrode. The main influence factors on the degradation of ISN, such as initial ISN concentration, Na₂SO₄ concentration, current density and initial pH value was analyzed in detail. Considered comprehensively the effects of ISN removal efficiency, COD and average current efficiency, the degradation of ISN and COD reached 99.4% and 86.8%, respectively, after the electrode was degraded by electrochemical oxidation for 120 min under the best conditions. In addition, the degradation mechanism of ISN in electrochemical oxidation was studied. According to the intermediate products detected by GC-MS, the possible degradation pathway of ISN in electrochemical oxidation system were proposed.

Fabrication and characterization of porous titanium-based PbO2 electrode through the pulse electrodeposition method: Deposition condition optimization by orthogonal experiment

Porous titanium-based PbO₂ electrodes were successfully fabricated by pulse electrodeposition method. The primary pulse electrodeposition parameters, including pulse frequency (f), duty ratio (γ), average current density (J_a) and electrodeposition time (t) were considered in this study. An orthogonal experiment was designed based on those four factors and in three levels. SEM images and XRD results suggest that the surface morphology and structure of PbO₂ electrodes could be easily changed by varying pulse electrodeposition parameters. Orthogonal analysis reveals that the increase of f and J_a could decrease the average grain size of PbO₂ electrodes, which is conducive to create more active sites and promote the generation of hydroxide radicals. The electrochemical degradation of Azophloxine was carried out to evaluate the electrochemical oxidation performance of pulse electrodeposited electrodes. The results indicate that the influences of four factors can be ranked as follow: J_a >γ≈ t > f. The higher f, larger J_a and longer t could facilitate the optimization of the integrated electrochemical degradation performance of prepared PbO₂ electrode. The accelerated life time is dominated by J_a and t, coincident with the average weight increase of β-PbO₂ layer. The optimal parameters of pulse electrodeposition turn out to be: f = 50 Hz, γ = 30%, J_a = 25 mA cm^-2, t = 60 min. Together, the consequences of the experiments give assistance to uncover and roughly conclude the mechanism of pulse electrodeposition.

Fabrication of Co/Pr co-doped Ti/PbO2 anode for efficiently electrocatalytic degradation of β-naphthoxyacetic acid

The existence of β-naphthoxyacetic acid (BNOA) pesticide in water system has aroused serious environmental problem because of its potential toxicity for humans and organisms. Therefore, exploiting an efficient method without secondary pollution is extremely urgent. Herein, a promising Ti/PbO₂-Co-Pr composite electrode has been successfully fabricated through simple one-step electrodeposition for efficiently electrocatalytic degradation of BNOA. Compared with Ti/PbO₂, Ti/PbO₂-Co and Ti/PbO₂-Pr electrodes, Ti/PbO₂-Co-Pr electrode with smaller pyramidal particles possesses higher oxygen evolution potential, excellent electrochemical stability and outstanding electrocatalytic activity. The optimal degradation condition is assessed by major parameters including temperature, initial pH, current density and Na₂SO₄ concentration. The degradation efficiency and chemical oxygen demand removal efficiency of BNOA reach up to 94.6% and 84.6%, respectively, under optimal condition (temperature 35 °C, initial pH 5, current density 12 mA cm^-2, Na₂SO₄ concentration 8.0 g L^-1 and electrolysis time 3 h). Furthermore, Ti/PbO₂-Co-Pr electrode presents economic energy consumption and superior repeatability. Finally, the possible degradation mechanism of BNOA is put forward according to the main intermediate products identified by liquid chromatography-mass spectrometer. The present research paves a new path to degrade BNOA pesticide wastewater with Ti/PbO₂-Co-Pr electrode.

Insights into the Toxicity and Degradation Mechanisms of Imidacloprid Via Physicochemical and Microbial Approaches

Imidacloprid is a neonicotinoid insecticide that has been widely used to control insect pests in agricultural fields for decades. It shows insecticidal activity mainly by blocking the normal conduction of the central nervous system in insects. However, in recent years, imidacloprid has been reported to be an emerging contaminant in all parts of the world, and has different toxic effects on a variety of non-target organisms, including human beings, due to its large-scale use. Hence, the removal of imidacloprid from the ecosystem has received widespread attention. Different remediation approaches have been studied to eliminate imidacloprid residues from the environment, such as oxidation, hydrolysis, adsorption, ultrasound, illumination, and biodegradation. In nature, microbial degradation is one of the most important processes controlling the fate of and transformation from imidacloprid use, and from an environmental point of view, it is the most promising means, as it is the most effective, least hazardous, and most environmentally friendly. To date, several imidacloprid-degrading microbes, including Bacillus, Pseudoxanthomonas, Mycobacterium, Rhizobium, Rhodococcus, and Stenotrophomonas, have been characterized for biodegradation. In addition, previous studies have found that many insects and microorganisms have developed resistance genes to and degradation enzymes of imidacloprid. Furthermore, the metabolites and degradation pathways of imidacloprid have been reported. However, reviews of the toxicity and degradation mechanisms of imidacloprid are rare. In this review, the toxicity and degradation mechanisms of imidacloprid are summarized in order to provide a theoretical and practical basis for the remediation of imidacloprid-contaminated environments.