Artificial intelligence in image reconstruction: The change is here

Application of deep learning reconstruction combined with time-resolved post-processing method to improve image quality in CTA derived from low-dose cerebral CT perfusion data

BACKGROUND

To assess the effect of the combination of deep learning reconstruction (DLR) and time-resolved maximum intensity projection (tMIP) or time-resolved average (tAve) post-processing method on image quality of CTA derived from low-dose cerebral CTP.

METHODS

Thirty patients underwent regular dose CTP (Group A) and other thirty with low-dose (Group B) were retrospectively enrolled. Group A were reconstructed with hybrid iterative reconstruction (R-HIR). In Group B, four image datasets of CTA were gained: L-HIR, L-DLR, L-DLRtMIP and L-DLRtAve. The CT attenuation, image noise, signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR) and subjective images quality were calculated and compared. The Intraclass Correlation (ICC) between CTA and MRA of two subgroups were calculated.

RESULTS

The low-dose group achieved reduction of radiation dose by 33% in single peak arterial phase and 18% in total compared to the regular dose group (single phase: 0.12 mSv vs 0.18 mSv; total: 1.91mSv vs 2.33mSv). The L-DLRtMIP demonstrated higher CT values in vessels compared to R-HIR (all P < 0.05). The CNR of vessels in L-HIR were statistically inferior to R-HIR (all P < 0.001). There was no significant different in image noise and CNR of vessels between L-DLR and R-HIR (all P > 0.05, except P = 0.05 for CNR of ICAs, 77.19 ± 21.64 vs 73.54 ± 37.03). However, the L-DLRtMIP and L-DLRtAve presented lower image noise, higher CNR (all P < 0.05) and subjective scores (all P < 0.001) in vessels than R-HIR. The diagnostic accuracy in Group B was excellent (ICC = 0.944).

CONCLUSION

Combining DLR with tMIP or tAve allows for reduction in radiation dose by about 33% in single peak arterial phase and 18% in total in CTP scanning, while further improving image quality of CTA derived from CTP data when compared to HIR.

Deep learning reconstruction algorithm and high-concentration contrast medium: feasibility of a double-low protocol in coronary computed tomography angiography

OBJECTIVE

To evaluate radiation dose and image quality of a double-low CCTA protocol reconstructed utilizing high-strength deep learning image reconstructions (DLIR-H) compared to standard adaptive statistical iterative reconstruction (ASiR-V) protocol in non-obese patients.

MATERIALS AND METHODS

From June to October 2022, consecutive patients, undergoing clinically indicated CCTA, with BMI < 30 kg/m2 were prospectively included and randomly assigned into three groups: group A (100 kVp, ASiR-V 50%, iodine delivery rate [IDR] = 1.8 g/s), group B (80 kVp, DLIR-H, IDR = 1.4 g/s), and group C (80 kVp, DLIR-H, IDR = 1.2 g/s). High-concentration contrast medium was administered. Image quality analysis was evaluated by two radiologists. Radiation and contrast dose, and objective and subjective image quality were compared across the three groups.

RESULTS

The final population consisted of 255 patients (64 ± 10 years, 161 men), 85 per group. Group B yielded 42% radiation dose reduction (2.36 ± 0.9 mSv) compared to group A (4.07 ± 1.2 mSv; p < 0.001) and achieved a higher signal-to-noise ratio (30.5 ± 11.5), contrast-to-noise-ratio (27.8 ± 11), and subjective image quality (Likert scale score: 4, interquartile range: 3-4) compared to group A and group C (all p ≤ 0.001). Contrast medium dose in group C (44.8 ± 4.4 mL) was lower than group A (57.7 ± 6.2 mL) and B (50.4 ± 4.3 mL), all the comparisons were statistically different (all p < 0.001).

CONCLUSION

DLIR-H combined with 80-kVp CCTA with an IDR 1.4 significantly reduces radiation and contrast medium exposure while improving image quality compared to conventional 100-kVp with 1.8 IDR protocol in non-obese patients.

CLINICAL RELEVANCE STATEMENT

Low radiation and low contrast medium dose coronary CT angiography protocol is feasible with high-strength deep learning reconstruction and high-concentration contrast medium without compromising image quality.

KEY POINTS

Minimizing the radiation and contrast medium dose while maintaining CT image quality is highly desirable. High-strength deep learning iterative reconstruction protocol yielded 42% radiation dose reduction compared to conventional protocol. "Double-low" coronary CTA is feasible with high-strength deep learning reconstruction without compromising image quality in non-obese patients.

In-depth and high-throughput spatial proteomics for whole-tissue slice profiling by deep learning-facilitated sparse sampling strategy

Mammalian organs and tissues are composed of heterogeneously distributed cells, which interact with each other and the extracellular matrix surrounding them in a spatially defined way. Therefore, spatially resolved gene expression profiling is crucial for determining the function and phenotypes of these cells. While genome mutations and transcriptome alterations act as drivers of diseases, the proteins that they encode regulate essentially all biological functions and constitute the majority of biomarkers and drug targets for disease diagnostics and treatment. However, unlike transcriptomics, which has a recent explosion in high-throughput spatial technologies with deep coverage, spatial proteomics capable of reaching bulk tissue-level coverage is still rare in the field, due to the non-amplifiable nature of proteins and sensitivity limitation of mass spectrometry (MS). More importantly, due to the limited multiplexing capability of the current proteomics methods, whole-tissue slice mapping with high spatial resolution requires a formidable amount of MS matching time. To achieve spatially resolved, deeply covered proteome mapping for centimeter-sized samples, we developed a sparse sampling strategy for spatial proteomics (S4P) using computationally assisted image reconstruction methods, which is potentially capable of reducing the number of samples by tens to thousands of times depending on the spatial resolution. In this way, we generated the largest spatial proteome to date, mapping more than 9000 proteins in the mouse brain, and discovered potential new regional or cell type markers. Considering its advantage in sensitivity and throughput, we expect that the S4P strategy will be applicable to a wide range of tissues in future studies.

Machine Learning and Deep Learning Applications in Magnetic Particle Imaging

In recent years, magnetic particle imaging (MPI) has emerged as a promising imaging technique depicting high sensitivity and spatial resolution. It originated in the early 2000s where it proposed a new approach to challenge the low spatial resolution achieved by using relaxometry in order to measure the magnetic fields. MPI presents 2D and 3D images with high temporal resolution, non-ionizing radiation, and optimal visual contrast due to its lack of background tissue signal. Traditionally, the images were reconstructed by the conversion of signal from the induced voltage by generating system matrix and X-space based methods. Because image reconstruction and analyses play an integral role in obtaining precise information from MPI signals, newer artificial intelligence-based methods are continuously being researched and developed upon. In this work, we summarize and review the significance and employment of machine learning and deep learning models for applications with MPI and the potential they hold for the future. LEVEL OF EVIDENCE: 5 TECHNICAL EFFICACY: Stage 1.

Descriptive overview of AI applications in x-ray imaging and radiotherapy

Artificial intelligence (AI) is transforming medical radiation applications by handling complex data, learning patterns, and making accurate predictions, leading to improved patient outcomes. This article examines the use of AI in optimising radiation doses for x-ray imaging, improving radiotherapy outcomes, and briefly addresses the benefits, challenges, and limitations of AI integration into clinical workflows. In diagnostic radiology, AI plays a pivotal role in optimising radiation exposure, reducing noise, enhancing image contrast, and lowering radiation doses, especially in high-dose procedures like computed tomography (CT). Deep learning (DL)-powered CT reconstruction methods have already been incorporated into clinical routine. Moreover, AI-powered methodologies have been developed to provide real-time, patient-specific radiation dose estimates. These AI-driven tools have the potential to streamline workflows and potentially become integral parts of imaging practices. In radiotherapy, AI's ability to automate and enhance the precision of treatment planning is emphasised. Traditional methods, such as manual contouring, are time-consuming and prone to variability. AI-driven techniques, particularly DL models, are automating the segmentation of organs and tumours, improving the accuracy of radiation delivery, and minimising damage to healthy tissues. Moreover, AI supports adaptive radiotherapy, allowing continuous optimisation of treatment plans based on changes in a patient's anatomy over time, ensuring the highest accuracy in radiation delivery and better therapeutic outcomes. Some of these methods have been validated and integrated into radiation treatment systems, while others are not yet ready for routine clinical use mainly due to challenges in validation, particularly ensuring reliability across diverse patient populations and clinical settings. Despite the potential of AI, there are challenges in fully integrating these technologies into clinical practice. Issues such as data protection, privacy, data quality, model validation, and the need for large and diverse datasets are crucial to ensuring the reliability of AI systems.

A strategy for achieving optimisation of radiological protection in digital radiology proposed by ICRP

Radiology is now predominantly a digital medium and this has extended the flexibility, efficiency and application of medical imaging. Achieving the full benefit of digital radiology requires images to be of sufficient quality to make a reliable diagnosis for each patient, while minimising risks from radiation exposure, and so involves a careful balance between competing objectives. When an optimisation programme is undertaken, a knowledge of patient doses from surveys can be valuable in identifying areas needing attention. However, any dose reduction measures must not degrade image quality to the extent that it is inadequate for the clinical purpose. The move to digital imaging has enabled versatile image acquisition and presentation, including multi-modality display and quantitative assessment, with post-processing options that adjust for optimal viewing. This means that the appearance of an image is unlikely to give any indication when the dose is higher than necessary. Moreover, options to improve performance of imaging equipment add to its complexity, so operators require extensive training to be able to achieve this. Optimisation is a continuous rather than single stage process that requires regular monitoring, review, and analysis of performance feeding into improvement and development of imaging protocols. The ICRP is in the process of publishing two reports about optimisation in digital radiology. The first report sets out components needed to ensure that a radiology service can carry optimisation through. It describes how imaging professionals should work together as a team and explains the benefits of having appropriate methodologies to monitor performance, together with the knowledge and expertise required to use them effectively. It emphasises the need for development of organisational processes that ensure tasks are carried out. The second ICRP report deals with practical requirements for optimisation of different digital radiology modalities, and builds on information provided in earlier modality specific ICRP publications.

Artificial intelligence in endodontics: Fundamental principles, workflow, and tasks

The integration of artificial intelligence (AI) in healthcare has seen significant advancements, particularly in areas requiring image interpretation. Endodontics, a specialty within dentistry, stands to benefit immensely from AI applications, especially in interpreting radiographic images. However, there is a knowledge gap among endodontists regarding the fundamentals of machine learning and deep learning, hindering the full utilization of AI in this field. This narrative review aims to: (A) elaborate on the basic principles of machine learning and deep learning and present the basics of neural network architectures; (B) explain the workflow for developing AI solutions, from data collection through clinical integration; (C) discuss specific AI tasks and applications relevant to endodontic diagnosis and treatment. The article shows that AI offers diverse practical applications in endodontics. Computer vision methods help analyse images while natural language processing extracts insights from text. With robust validation, these techniques can enhance diagnosis, treatment planning, education, and patient care. In conclusion, AI holds significant potential to benefit endodontic research, practice, and education. Successful integration requires an evolving partnership between clinicians, computer scientists, and industry.

Radiation Detectors and Sensors in Medical Imaging

Medical imaging instrumentation design and construction is based on radiation sources and radiation detectors/sensors. This review focuses on the detectors and sensors of medical imaging systems. These systems are subdivided into various categories depending on their structure, the type of radiation they capture, how the radiation is measured, how the images are formed, and the medical goals they serve. Related to medical goals, detectors fall into two major areas: (i) anatomical imaging, which mainly concerns the techniques of diagnostic radiology, and (ii) functional-molecular imaging, which mainly concerns nuclear medicine. An important parameter in the evaluation of the detectors is the combination of the quality of the diagnostic result they offer and the burden of the patient with radiation dose. The latter has to be minimized; thus, the input signal (radiation photon flux) must be kept at low levels. For this reason, the detective quantum efficiency (DQE), expressing signal-to-noise ratio transfer through an imaging system, is of primary importance. In diagnostic radiology, image quality is better than in nuclear medicine; however, in most cases, the dose is higher. On the other hand, nuclear medicine focuses on the detection of functional findings and not on the accurate spatial determination of anatomical data. Detectors are integrated into projection or tomographic imaging systems and are based on the use of scintillators with optical sensors, photoconductors, or semiconductors. Analysis and modeling of such systems can be performed employing theoretical models developed in the framework of cascaded linear systems analysis (LCSA), as well as within the signal detection theory (SDT) and information theory.

Evolving and Novel Applications of Artificial Intelligence in Thoracic Imaging

The advent of artificial intelligence (AI) is revolutionizing medicine, particularly radiology. With the development of newer models, AI applications are demonstrating improved performance and versatile utility in the clinical setting. Thoracic imaging is an area of profound interest, given the prevalence of chest imaging and the significant health implications of thoracic diseases. This review aims to highlight the promising applications of AI within thoracic imaging. It examines the role of AI, including its contributions to improving diagnostic evaluation and interpretation, enhancing workflow, and aiding in invasive procedures. Next, it further highlights the current challenges and limitations faced by AI, such as the necessity of 'big data', ethical and legal considerations, and bias in representation. Lastly, it explores the potential directions for the application of AI in thoracic radiology.

Bringing MRI to low- and middle-income countries: Directions, challenges and potential solutions

The global disparity of magnetic resonance imaging (MRI) is a major challenge, with many low- and middle-income countries (LMICs) experiencing limited access to MRI. The reasons for limited access are technological, economic and social. With the advancement of MRI technology, we explore why these challenges still prevail, highlighting the importance of MRI as the epidemiology of disease changes in LMICs. In this paper, we establish a framework to develop MRI with these challenges in mind and discuss the different aspects of MRI development, including maximising image quality using cost-effective components, integrating local technology and infrastructure and implementing sustainable practices. We also highlight the current solutions-including teleradiology, artificial intelligence and doctor and patient education strategies-and how these might be further improved to achieve greater access to MRI.

Advanced deep learning-based image reconstruction in lumbar spine MRI at 0.55 T - Effects on image quality and acquisition time in comparison to conventional deep learning-based reconstruction

Objectives

To evaluate an optimized deep leaning-based image post-processing technique in lumbar spine MRI at 0.55 T in terms of image quality and image acquisition time.

Materials and methods

Lumbar spine imaging was conducted on 18 patients using a 0.55 T MRI scanner, employing conventional (CDLR) and advanced (ADLR) deep learning-based post-processing techniques. Two musculoskeletal radiologists visually evaluated the images using a 5-point Likert scale to assess image quality and resolution. Quantitative assessment in terms of signal intensities (SI) and contrast ratios was performed by region of interest measurements in different body-tissues (vertebral bone, intervertebral disc, spinal cord, cerebrospinal fluid and autochthonous back muscles) to investigate differences between CDLR and ADLR sequences.

Results

The images processed with the advanced technique (ADLR) were rated superior to the conventional technique (CDLR) in terms of signal/contrast, resolution, and assessability of the spinal canal and neural foramen. The interrater agreement was moderate for signal/contrast (ICC = 0.68) and good for resolution (ICC = 0.77), but moderate for spinal canal and neuroforaminal assessability (ICC = 0.55). Quantitative assessment showed a higher contrast ratio for fluid-sensitive sequences in the ADLR images. The use of ADLR reduced image acquisition time by 44.4%, from 14:22 min to 07:59 min.

Conclusions

Advanced deep learning-based image reconstruction algorithms improve the visually perceived image quality in lumbar spine imaging at 0.55 T while simultaneously allowing to substantially decrease image acquisition times.

Clinical relevance

Advanced deep learning-based image post-processing techniques (ADLR) in lumbar spine MRI at 0.55 T significantly improves image quality while reducing image acquisition time.

Three-dimensional reconstruction of renal tumor anatomy for preoperative planning of robotic partial nephrectomy in renal cell carcinoma cases with duplex kidney: a case report

BACKGROUND

The duplex kidney is one of the common congenital anomalies of the kidney and urinary tract. We present two cases of renal tumor accompanied with ipsilateral duplex kidney. The image of the tumor, renal artery system and collecting system were rendered by AI software (Fujifilm's Synapse® AI Platform) to support the diagnosis and surgical planning.

CASE PRESENTATION

Two Vietnamese patients (a 45-year-old man and a 54-year-old woman) with incidental cT1 renal cell carcinoma (RCC) were confirmed to have ipsilateral duplex kidneys by 3D reconstruction AI technique. One patient had a Renal score 9ah tumor of left kidney while the other had a Renal score 9 × tumor of right kidney in which a preoperative CT scan failed to identify a diagnosis of duplex kidney. Using the Da Vinci platform, we successfully performed robotic partial nephrectomy without any damage to the collecting system in both cases.

CONCLUSION

RCC with duplex kidneys is a rare condition. By utilizing a novel AI reconstruction technique with adequate information, two patients with RCC in duplex kidneys were successfully performed robotic partial nephrectomy without complication.

Novel Deep Learning Denoising Enhances Image Quality and Lowers Radiation Exposure in Interventional Bronchial Artery Embolization Cone Beam CT

OBJECTIVES

In interventional bronchial artery embolization (BAE), periprocedural cone beam CT (CBCT) improves guiding and localization. However, a trade-off exists between 6-second runs (high radiation dose and motion artifacts, but low noise) and 3-second runs (vice versa). This study aimed to determine the efficacy of an advanced deep learning denoising (DLD) technique in mitigating the trade-offs related to radiation dose and image quality during interventional BAE CBCT.

MATERIALS AND METHODS

This study included BMI-matched patients undergoing 6-second and 3-second BAE CBCT scans. The dose-area product values (DAP) were obtained. All datasets were reconstructed using standard weighted filtered back projection (OR) and a novel DLD software. Objective image metrics were derived from place-consistent regions of interest, including CT numbers of the Aorta and lung, noise, and contrast-to-noise ratio. Three blinded radiologists performed subjective assessments regarding image quality, sharpness, contrast, and motion artifacts on all dataset combinations in a forced-choice setup (-1 = inferior, 0 = equal; 1 = superior). The points were averaged per item for a total score. Statistical analysis ensued using a properly corrected mixed-effects model with post hoc pairwise comparisons.

RESULTS

Sixty patients were assessed in 30 matched pairs (age 64 ± 15 years; 10 female). The mean DAP for the 6 s and 3 s runs was 2199 ± 185 µGym² and 1227 ± 90 µGym², respectively. Neither low-dose imaging nor the reconstruction method introduced a significant HU shift (p ≥ 0.127). The 3 s-DLD presented the least noise and superior contrast-to-noise ratio (CNR) (p < 0.001). While subjective evaluation revealed no noticeable distinction between 6 s-DLD and 3 s-DLD in terms of quality (p ≥ 0.996), both outperformed the OR variants (p < 0.001). The 3 s datasets exhibited fewer motion artifacts than the 6 s datasets (p < 0.001).

CONCLUSIONS

DLD effectively mitigates the trade-off between radiation dose, image noise, and motion artifact burden in regular reconstructed BAE CBCT by enabling diagnostic scans with low radiation exposure and inherently low motion artifact burden at short examination times.

A CT deep learning reconstruction algorithm: Image quality evaluation for brain protocol at decreasing dose indexes in comparison with FBP and statistical iterative reconstruction algorithms

PURPOSE

To characterise the impact of Precise Image (PI) deep learning reconstruction algorithm on image quality, compared to filtered back-projection (FBP) and iDose4 iterative reconstruction for brain computed tomography (CT) phantom images.

METHODS

Catphan-600 phantom was acquired with an Incisive CT scanner using a dedicated brain protocol, at six different dose levels (volume computed tomography dose index (CTDIvol): 7/14/29/49/56/67 mGy). Images were reconstructed using FBP, levels 2/5 of iDose4, and PI algorithm (Sharper/Sharp/Standard/Smooth/Smoother). Image quality was assessed by evaluating CT numbers, image histograms, noise, image non-uniformity (NU), noise power spectrum, target transfer function, and detectability index.

RESULTS

The five PI levels did not significantly affect the mean CT number. For a given CTDIvol using Sharper-to-Smoother levels, the spatial resolution for all the investigated materials and the detectability index increased while the noise magnitude decreased, slightly affecting noise texture. For a fixed PI level increasing the CTDIvol the detectability index increased, the noise magnitude decreased. From 29 mGy, NU values converged within 1 Hounsfield Unit from each other without a substantial improvement at higher CTDIvol values.

CONCLUSIONS

The improved performances of intermediate PI levels in brain protocols compared to conventional algorithms seem to suggest a potential reduction of CTDIvol.

Impacts of Adaptive Statistical Iterative Reconstruction-V and Deep Learning Image Reconstruction Algorithms on Robustness of CT Radiomics Features: Opportunity for Minimizing Radiomics Variability Among Scans of Different Dose Levels

This study aims to investigate the influence of adaptive statistical iterative reconstruction-V (ASIR-V) and deep learning image reconstruction (DLIR) on CT radiomics feature robustness. A standardized phantom was scanned under single-energy CT (SECT) and dual-energy CT (DECT) modes at standard and low (20 and 10 mGy) dose levels. Images of SECT 120 kVp and corresponding DECT 120 kVp-like virtual monochromatic images were generated with filtered back-projection (FBP), ASIR-V at 40% (AV-40) and 100% (AV-100) blending levels, and DLIR algorithm at low (DLIR-L), medium (DLIR-M), and high (DLIR-H) strength levels. Ninety-four features were extracted via Pyradiomics. Reproducibility of features was calculated between standard and low dose levels, between reconstruction algorithms in reference to FBP images, and within scan mode, using intraclass correlation coefficient (ICC) and concordance correlation coefficient (CCC). The average percentage of features with ICC > 0.90 and CCC > 0.90 between the two dose levels was 21.28% and 20.75% in AV-40 images, and 39.90% and 35.11% in AV-100 images, respectively, and increased from 15.43 to 45.22% and from 15.43 to 44.15% with an increasing strength level of DLIR. The average percentage of features with ICC > 0.90 and CCC > 0.90 in reference to FBP images was 26.07% and 25.80% in AV-40 images, and 18.88% and 18.62% in AV-100 images, respectively, and decreased from 27.93 to 17.82% and from 27.66 to 17.29% with an increasing strength level of DLIR. DLIR and ASIR-V algorithms showed low reproducibility in reference to FBP images, while the high-strength DLIR algorithm provides an opportunity for minimizing radiomics variability due to dose reduction.

Dual-Energy Computed Tomography to Photon Counting Computed Tomography: Emerging Technological Innovations

Computed tomography (CT) has seen remarkable developments in the past several decades, radically transforming the role of imaging in day-to-day clinical practice. Dual-energy CT (DECT), an exciting innovation introduced in the early part of this century, has widened the scope of CT, opening new opportunities due to its ability to provide superior tissue characterization. The introduction of photon-counting CT (PCCT) heralds a paradigm shift in CT scanner technology representing another significant milestone in CT innovation. PCCT offers several advantages over DECT, such as improved spectral resolution, enhanced tissue characterization, reduced image artifacts, and improved image quality.

Deep Learning Reconstruction Improves the Image Quality of CT Angiography Derived From 80-kVp Cerebral CT Perfusion Data

RATIONALE AND OBJECTIVE

To investigate the impact of the deep learning reconstruction (DLR) technique on the image quality of CT angiography (CTA) derived from 80-kVp cerebral CT perfusion (CTP) data and compare it with hybrid-iterative reconstruction (HIR).

MATERIALS AND METHODS

Thirty-three patients underwent CTP at 80 kVp were prospectively enrolled. CTP data were reconstructed with HIR and DLR. Four image datasets were reconstructed: HIRpeak and DLRpeak were single arterial phase images derived from the time point showing the peak value, HIRtMIP and HIRtAve were time-resolved maximum intensity projection image and time-resolved average image derived from three time points with the greatest enhancement of HIR. The mean CT values, standard deviation, signal-to-noise ratio, and contrast-to-noise ratio of the internal carotid artery and basilar artery were compared among the four image dataset. Image quality was performed using a five-point rating scale. Arterial stenosis was evaluated.

RESULTS

DLRpeak had the highest CT value and contrast-to-noise ratio in the internal carotid artery and basilar artery (all p < 0.001). DLRpeak showed the best subjective image quality and had the highest score (4.93 ± 0.4) compared to the other three HIR CTA images (all p < 0.001). The degree of vascular stenosis was consistent among the four evaluated sequences (HIRtAve, HIRpeak, and HIRtMIP DLRpeak).

CONCLUSION

For CTA derived from 80-kVp cerebral CTP data, images reconstructed with deep learning showed better image quality and improved intracranial artery visualization than those processed with HIR and other currently used techniques.

Quantitative analysis of prion disease using an AI-powered digital pathology framework

Prion disease is a fatal neurodegenerative disorder characterized by accumulation of an abnormal prion protein (PrPSc) in the central nervous system. To identify PrPSc aggregates for diagnostic purposes, pathologists use immunohistochemical staining of prion protein antibodies on tissue samples. With digital pathology, artificial intelligence can now analyze stained slides. In this study, we developed an automated pipeline for the identification of PrPSc aggregates in tissue samples from the cerebellar and occipital cortex. To the best of our knowledge, this is the first framework to evaluate PrPSc deposition in digital images. We used two strategies: a deep learning segmentation approach using a vision transformer, and a machine learning classification approach with traditional classifiers. Our method was developed and tested on 64 whole slide images from 41 patients definitively diagnosed with prion disease. The results of our study demonstrated that our proposed framework can accurately classify WSIs from a blind test set. Moreover, it can quantify PrPSc distribution and localization throughout the brain. This could potentially be extended to evaluate protein expression in other neurodegenerative diseases like Alzheimer's and Parkinson's. Overall, our pipeline highlights the potential of AI-assisted pathology to provide valuable insights, leading to improved diagnostic accuracy and efficiency.

Mapping gender and geographic diversity in artificial intelligence research: Editor representation in leading computer science journals

Background

The growing role of artificial intelligence (AI) in healthcare, particularly radiology, requires its unbiased and fair development and implementation, starting with the constitution of the scientific community.

Purpose

To examine the gender and country distribution among academic editors in leading computer science and AI journals.

Material and Methods

This cross-sectional study analyzed the gender and country distribution among editors-in-chief, senior, and associate editors in all 75 Q1 computer science and AI journals in the Clarivate Journal Citations Report and SCImago Journal Ranking 2022. Gender was determined using an open-source algorithm (Gender Guesser™), selecting the gender with the highest calibrated probability.

Result

Among 4,948 editorial board members, women were underrepresented in all positions (editors-in-chief/senior editors/associate editors: 14%/18%/17%). The proportion of women correlated positively with the SCImago Journal Rank indicator (ρ = 0.329; p = .004). The U.S., the U.K., and China comprised 50% of editors, while Australia, Finland, Estonia, Denmark, the Netherlands, the U.K., Switzerland, and Slovenia had the highest women editor representation per million women population.

Conclusion

Our results highlight gender and geographic disparities on leading computer science and AI journal editorial boards, with women being underrepresented in all positions and a disproportional relationship between the Global North and South.

Noise reduction performance of a deep learning-based reconstruction in brain computed tomography images acquired with organ-based tube current modulation

We aimed to evaluate the image quality of brain computed tomography (CT) images reconstructed using deep learning-based reconstruction (DLR) in organ-based tube current modulation (OB-TCM) acquisition. An anthropomorphic head phantom and a cylindrical low-contrast phantom were scanned at the standard dose level for adult brain CT in axial volume acquisition without OB-TCM. Moreover, image acquisition with OB-TCM was performed. The radiation dose on the eye lens was measured using a scintillation fibre-optic dosimeter placed on the anthropomorphic phantom's eye surface. The task transfer function (TTF), contrast-to-noise ratio (CNR), and low-contrast object specific CNR obtained from low-contrast phantom images reconstructed with filtered back projection (FBP), hybrid iterative reconstruction (HIR), and two types of DLR (DLRCTA and DLRLCD) were compared. In result, OB-TCM achieved a 32.5% dose reduction in the eye lens. Although HIR, DLRCTA, and DLRLCD showed lower TTF than FBP, the difference in TTF at the highest contributing spatial frequency corresponding to the contrast rod diameter was < 10%. Despite the OB-TCM acquisition, DLRCTA and DLRLCD achieved significantly lower noise and a higher CNR than FBP without OB-TCM (p < 0.05). However, low-contrast object specific CNR was equivalent among all reconstruction methods for the objective diameter of 5 mm and slightly improved in DLRLCD for the objective diameter of 7 mm. DLR with OB-TCM acquisition enabled dose reduction for the eye lens and high CNR image appearance, whereas the low contrast detectability evaluated by low-contrast object specific CNR did not always improve.

A highly accurate quantum optimization algorithm for CT image reconstruction based on sinogram patterns

Computed tomography (CT) has been developed as a nondestructive technique for observing minute internal images in samples. It has been difficult to obtain photorealistic (clean or clear) CT images due to various unwanted artifacts generated during the CT scanning process, along with the limitations of back-projection algorithms. Recently, an iterative optimization algorithm has been developed that uses an entire sinogram to reduce errors caused by artifacts. In this paper, we introduce a new quantum algorithm for reconstructing CT images. This algorithm can be used with any type of light source as long as the projection is defined. Assuming an experimental sinogram produced by a Radon transform, to find the CT image of this sinogram, we express the CT image as a combination of qubits. After acquiring the Radon transform of the undetermined CT image, we combine the actual sinogram and the optimized qubits. The global energy optimization value used here can determine the value of qubits through a gate model quantum computer or quantum annealer. In particular, the new algorithm can also be used for cone-beam CT image reconstruction and for medical imaging.

Deep-Learning-Based Image Denoising in Imaging of Urolithiasis: Assessment of Image Quality and Comparison to State-of-the-Art Iterative Reconstructions

This study aimed to compare the image quality and diagnostic accuracy of deep-learning-based image denoising reconstructions (DLIDs) to established iterative reconstructed algorithms in low-dose computed tomography (LDCT) of patients with suspected urolithiasis. LDCTs (CTDIvol, 2 mGy) of 76 patients (age: 40.3 ± 5.2 years, M/W: 51/25) with suspected urolithiasis were retrospectively included. Filtered-back projection (FBP), hybrid iterative and model-based iterative reconstruction (HIR/MBIR, respectively) were reconstructed. FBP images were processed using a Food and Drug Administration (FDA)-approved DLID. ROIs were placed in renal parenchyma, fat, muscle and urinary bladder. Signal- and contrast-to-noise ratios (SNR/CNR, respectively) were calculated. Two radiologists evaluated image quality on five-point Likert scales and urinary stones. The results showed a progressive decrease in image noise from FBP, HIR and DLID to MBIR with significant differences between each method (p < 0.05). SNR and CNR were comparable between MBIR and DLID, while it was significantly lower in HIR followed by FBP (e.g., SNR: 1.5 ± 0.3; 1.4 ± 0.4; 1.0 ± 0.3; 0.7 ± 0.2, p < 0.05). Subjective analysis confirmed best image quality in MBIR, followed by DLID and HIR, both being superior to FBP (p < 0.05). Diagnostic accuracy for urinary stone detection was best using MBIR (0.94), lowest using FBP (0.84) and comparable between DLID (0.90) and HIR (0.90). Stone size measurements were consistent between all reconstructions and showed excellent correlation (r2 = 0.958-0.975). In conclusion, MBIR yielded the highest image quality and diagnostic accuracy, with DLID producing better results than HIR and FBP in image quality and matching HIR in diagnostic precision.

Imaging in Interventional Radiology: 2043 and Beyond

Since its inception in the early 20th century, interventional radiology (IR) has evolved tremendously and is now a distinct clinical discipline with its own training pathway. The arsenal of modalities at work in IR includes x-ray radiography and fluoroscopy, CT, MRI, US, and molecular and multimodality imaging within hybrid interventional environments. This article briefly reviews the major developments in imaging technology in IR over the past century, summarizes technologies now representative of the standard of care, and reflects on emerging advances in imaging technology that could shape the field in the century ahead. The role of emergent imaging technologies in enabling high-precision interventions is also briefly reviewed, including image-guided ablative therapies.

Artificial intelligence for reducing the radiation burden of medical imaging for the diagnosis of coronavirus disease

Medical imaging has been intensively employed in screening, diagnosis and monitoring during the COVID-19 pandemic. With the improvement of RT-PCR and rapid inspection technologies, the diagnostic references have shifted. Current recommendations tend to limit the application of medical imaging in the acute setting. Nevertheless, efficient and complementary values of medical imaging have been recognized at the beginning of the pandemic when facing unknown infectious diseases and a lack of sufficient diagnostic tools. Optimizing medical imaging for pandemics may still have encouraging implications for future public health, especially for long-lasting post-COVID-19 syndrome theranostics. A critical concern for the application of medical imaging is the increased radiation burden, particularly when medical imaging is used for screening and rapid containment purposes. Emerging artificial intelligence (AI) technology provides the opportunity to reduce the radiation burden while maintaining diagnostic quality. This review summarizes the current AI research on dose reduction for medical imaging, and the retrospective identification of their potential in COVID-19 may still have positive implications for future public health.

Brain image quality according to beam collimation width and image reconstruction algorithm: A phantom study

PURPOSE

To compare quantitatively and qualitatively brain image quality acquired in helical and axial modes on two wide collimation CT systems according to the dose level and algorithm used.

METHODS

Acquisitions were performed on an image quality and an anthropomorphic phantoms at three dose levels (CTDI_vol: 45/35/25 mGy) on two wide collimation CT systems (GE Healthcare and Canon Medical Systems) in axial and helical modes. Raw data were reconstructed using iterative reconstruction (IR) and deep-learning image reconstruction (DLR) algorithms. The noise power spectrum (NPS) was computed on both phantoms and the task-based transfer function (TTF) on the image quality phantom. The subjective quality of images from an anthropomorphic brain phantom was evaluated by two radiologists including overall image quality.

RESULTS

For the GE system, noise magnitude and noise texture (average NPS spatial frequency) were lower with DLR than with IR. For the Canon system, noise magnitude values were lower with DLR than with IR for similar noise texture but the opposite was true for spatial resolution. For both CT systems, noise magnitude was lower with the axial mode than with the helical mode for similar noise texture and spatial resolution. Radiologists rated the overall quality of all brain images as "satisfactory for clinical use", whatever the dose level, algorithm or acquisition mode.

CONCLUSIONS

Using 16-cm axial acquisition reduces image noise without changing the spatial resolution and image texture compared to helical acquisitions. Axial acquisition can be used in clinical routine for brain CT examinations with an explored length of less than 16 cm.

Iterative Reconstruction: State-of-the-Art and Future Perspectives

ABSTRACT

Image reconstruction processing in computed tomography (CT) has evolved tremendously since its creation, succeeding at optimizing radiation dose while maintaining adequate image quality. Computed tomography vendors have developed and implemented various technical advances, such as automatic noise reduction filters, automatic exposure control, and refined imaging reconstruction algorithms.Focusing on imaging reconstruction, filtered back-projection has represented the standard reconstruction algorithm for over 3 decades, obtaining adequate image quality at standard radiation dose exposures. To overcome filtered back-projection reconstruction flaws in low-dose CT data sets, advanced iterative reconstruction algorithms consisting of either backward projection or both backward and forward projections have been developed, with the goal to enable low-dose CT acquisitions with high image quality. Iterative reconstruction techniques play a key role in routine workflow implementation (eg, screening protocols, vascular and pediatric applications), in quantitative CT imaging applications, and in dose exposure limitation in oncologic patients.Therefore, this review aims to provide an overview of the technical principles and the main clinical application of iterative reconstruction algorithms, focusing on the strengths and weaknesses, in addition to integrating future perspectives in the new era of artificial intelligence.

Deep image and feature prior algorithm based on U-ConformerNet structure

PURPOSE

The reconstruction performance of the deep image prior (DIP) approach is limited by the conventional convolutional layer structure and it is difficult to enhance its potential. In order to improve the quality of image reconstruction and suppress artifacts, we propose a DIP algorithm with better performance, and verify its superiority in the latest case.

METHODS

We construct a new U-ConformerNet structure as the DIP algorithm's network, replacing the traditional convolutional layer-based U-net structure, and introduce the 'lpips' deep network based feature distance regularization method. Our algorithm can switch between supervised and unsupervised modes at will to meet different needs.

RESULTS

The reconstruction was performed on the low dose CT dataset (LoDoPaB). Our algorithm attained a PSNR of more than 35 dB under unsupervised conditions, and the PSNR under the supervised condition is greater than 36 dB. Both of which are better than the performance of the DIP-TV. Furthermore, the accuracy of this method is positively connected with the quality of the a priori image with the help of deep networks. In terms of noise eradication and artifact suppression, the DIP algorithm with U-ConformerNet structure outperforms the standard DIP method based on convolutional structure.

CONCLUSIONS

It is known by experimental verification that, in unsupervised mode, the algorithm improves the output PSNR by at least 2-3 dB when compared to the DIP-TV algorithm (proposed in 2020). In supervised mode, our algorithm approaches that of the state-of-the-art end-to-end deep learning algorithms.

Deep learning image reconstruction algorithm: impact on image quality in coronary computed tomography angiography

PURPOSE

To perform a comprehensive intraindividual objective and subjective image quality evaluation of coronary CT angiography (CCTA) reconstructed with deep learning image reconstruction (DLIR) and to assess correlation with routinely applied hybrid iterative reconstruction algorithm (ASiR-V).

MATERIAL AND METHODS

Fifty-one patients (29 males) undergoing clinically indicated CCTA from April to December 2021 were prospectively enrolled. Fourteen datasets were reconstructed for each patient: three DLIR strength levels (DLIR_L, DLIR_M, and DLIR_H), ASiR-V from 10% to 100% in 10%-increment, and filtered back-projection (FBP). Signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) determined objective image quality. Subjective image quality was assessed with a 4-point Likert scale. Concordance between reconstruction algorithms was assessed by Pearson correlation coefficient.

RESULTS

DLIR algorithm did not impact vascular attenuation (P ≥ 0.374). DLIR_H showed the lowest noise, comparable with ASiR-V 100% (P = 1) and significantly lower than other reconstructions (P ≤ 0.021). DLIR_H achieved the highest objective quality, with SNR and CNR comparable to ASiR-V 100% (P = 0.139 and 0.075, respectively). DLIR_M obtained comparable objective image quality with ASiR-V 80% and 90% (P ≥ 0.281), while achieved the highest subjective image quality (4, IQR: 4-4; P ≤ 0.001). DLIR and ASiR-V datasets returned a very strong correlation in the assessment of CAD (r = 0.874, P = 0.001).

CONCLUSION

DLIR_M significantly improves CCTA image quality and has very strong correlation with routinely applied ASiR-V 50% dataset in the diagnosis of CAD.

Auto-Detection of Motion Artifacts on CT Pulmonary Angiograms with a Physician-Trained AI Algorithm

Purpose: Motion-impaired CT images can result in limited or suboptimal diagnostic interpretation (with missed or miscalled lesions) and patient recall. We trained and tested an artificial intelligence (AI) model for identifying substantial motion artifacts on CT pulmonary angiography (CTPA) that have a negative impact on diagnostic interpretation. Methods: With IRB approval and HIPAA compliance, we queried our multicenter radiology report database (mPower, Nuance) for CTPA reports between July 2015 and March 2022 for the following terms: "motion artifacts", "respiratory motion", "technically inadequate", and "suboptimal" or "limited exam". All CTPA reports were from two quaternary (Site A, n = 335; B, n = 259) and a community (C, n = 199) healthcare sites. A thoracic radiologist reviewed CT images of all positive hits for motion artifacts (present or absent) and their severity (no diagnostic effect or major diagnostic impairment). Coronal multiplanar images from 793 CTPA exams were de-identified and exported offline into an AI model building prototype (Cognex Vision Pro, Cognex Corporation) to train an AI model to perform two-class classification ("motion" or "no motion") with data from the three sites (70% training dataset, n = 554; 30% validation dataset, n = 239). Separately, data from Site A and Site C were used for training and validating; testing was performed on the Site B CTPA exams. A five-fold repeated cross-validation was performed to evaluate the model performance with accuracy and receiver operating characteristics analysis (ROC). Results: Among the CTPA images from 793 patients (mean age 63 ± 17 years; 391 males, 402 females), 372 had no motion artifacts, and 421 had substantial motion artifacts. The statistics for the average performance of the AI model after five-fold repeated cross-validation for the two-class classification included 94% sensitivity, 91% specificity, 93% accuracy, and 0.93 area under the ROC curve (AUC: 95% CI 0.89-0.97). Conclusion: The AI model used in this study can successfully identify CTPA exams with diagnostic interpretation limiting motion artifacts in multicenter training and test datasets. Clinical relevance: The AI model used in the study can help alert technologists about the presence of substantial motion artifacts on CTPA, where a repeat image acquisition can help salvage diagnostic information.

Evolution from Medical Imaging to Visualized Medicine

The discovery of X-ray in 1895 and the first X-ray image of Mrs. Röntgen's hand opened up a new era of radiology and the research of medical imaging. The evolution of traditional medical imaging has been lasting for over 100 years, serving the detection, diagnosis, and treatments of human diseases with a clear view of the anatomy information. In late 1990s, the concept of molecular imaging was proposed as the science and technology of molecular biology and bio-engineering rapidly developed, and it directly gave birth to the emergence of precision medicine for clinical lesion-targeted treatments against various cancers and cardiocerebrovascular diseases. Physiological and pathological changes in live bodies from zebrafish to human beings can be imaged to ensure an efficient image-guided therapy. Nowadays, the philosophy of medical and molecular imaging has been a powerful tool and indispensable modality for doctors to make their decisions and give patients reliable advices. With the ever-emerging developments of advanced intelligent technologies such as flexible sensors, medical meta-data analysis, brain sciences, surgical robots, VR/AR, etc., modern medicine has been evolving from traditional medical and molecular imaging to visualized medicine, which has created novel accessible approaches along with cutting-edge techniques for the revolutionized diagnostic and therapeutic paradigms. In this context, the history and milestones from medical imaging to visualized medicine will be elucidated. And in particular, representative visualized medicine advances including its application to COVID-19 epidemics will be discussed in order to look for its important contributions and a future perspective to modern medicine.

Complex Relationship Between Artificial Intelligence and CT Radiation Dose

Concerns over need for CT radiation dose optimization and reduction led to improved scanner efficiency and introduction of several reconstruction techniques and image processing-based software. The latest technologies use artificial intelligence (AI) for CT dose optimization and image quality improvement. While CT dose optimization has and can benefit from AI, variations in scanner technologies, reconstruction methods, and scan protocols can lead to substantial variations in radiation doses and image quality across and within different scanners. These variations in turn can influence performance of AI algorithms being deployed for tasks such as detection, segmentation, characterization, and quantification. We review the complex relationship between AI and CT radiation dose.

Initial Characterization of Focal Bone Lesions with Conventional Radiographs or Computed Tomography: Diagnostic Performance and Interobserver Agreement Assessment

Objectives: To ascertain the role of CT and conventional radiographs for the initial characterization of focal bone lesions.Methods: Images from 184 patients with confirmed bone tumors included in an ethics committee-approved study were retrospectively evaluated. The reference for benign-malignant distribution was based on histological analysis and long-term follow-up. Radiographs and CT features were analyzed by 2 independent musculoskeletal radiologists blinded to the final diagnosis. Lesion margins, periosteal reaction, cortical lysis, endosteal scalloping, presence of pathologic fracture, and lesion mineralization were evaluated. Results: The benign-malignant distribution in the study population was 68.5-31.5% (126 benign and 58 malignant). In the lesions that could be seen in both radiographs and CT, the performance of these methods for the benign-malignant differentiation was similar (accuracy varying from 72.8% to 76.5%). The interobserver agreement for the overall evaluation of lesion aggressiveness was considerably increased on CT compared to radiographs (Kappa of .63 vs .22). With conventional radiographs, 18 (9.7%) and 20 (10.8%) of the lesions evaluated were not seen respectively by readers 1 and 2. Among these unseen lesions, 50%-61.1% were located in the axial skeleton. Compared to radiographs, the number of lesions with cortical lysis and endosteal scalloping was 26-34% higher with CT. Conclusion: Although radiographs remain the primary imaging tool for lesions in the peripheral skeleton, CT should be performed for axial lesions. CT imaging can assess the extent of perilesional bone lysis more precisely than radiographs with a better evaluation of lesion fracture risk.

Artificial intelligence in oncologic imaging

Radiology is integral to cancer care. Compared to molecular assays, imaging has its advantages. Imaging as a noninvasive tool can assess the entirety of tumor unbiased by sampling error and is routinely acquired at multiple time points in oncological practice. Imaging data can be digitally post-processed for quantitative assessment. The ever-increasing application of Artificial intelligence (AI) to clinical imaging is challenging radiology to become a discipline with competence in data science, which plays an important role in modern oncology. Beyond streamlining certain clinical tasks, the power of AI lies in its ability to reveal previously undetected or even imperceptible radiographic patterns that may be difficult to ascertain by the human sensory system. Here, we provide a narrative review of the emerging AI applications relevant to the oncological imaging spectrum and elaborate on emerging paradigms and opportunities. We envision that these technical advances will change radiology in the coming years, leading to the optimization of imaging acquisition and discovery of clinically relevant biomarkers for cancer diagnosis, staging, and treatment monitoring. Together, they pave the road for future clinical translation in precision oncology.

Radiologist-Trained and -Tested (R2.2.4) Deep Learning Models for Identifying Anatomical Landmarks in Chest CT

(1) Background: Optimal anatomic coverage is important for radiation-dose optimization. We trained and tested (R2.2.4) two (R3-2) deep learning (DL) algorithms on a machine vision tool library platform (Cognex Vision Pro Deep Learning software) to recognize anatomic landmarks and classify chest CT as those with optimum, under-scanned, or over-scanned scan length. (2) Methods: To test our hypothesis, we performed a study with 428 consecutive chest CT examinations (mean age 70 ± 14 years; male:female 190:238) performed at one of the four hospitals. CT examinations from two hospitals were used to train the DL classification algorithms to identify lung apices and bases. The developed algorithms were then tested on the data from the remaining two hospitals. For each CT, we recorded the scan lengths above and below the lung apices and bases. Model performance was assessed with receiver operating characteristics (ROC) analysis. (3) Results: The two DL models for lung apex and bases had high sensitivity, specificity, accuracy, and areas under the curve (AUC) for identifying under-scanning (100%, 99%, 99%, and 0.999 (95% CI 0.996–1.000)) and over-scanning (99%, 99%, 99%, and 0.998 (95%CI 0.992–1.000)). (4) Conclusions: Our DL models can accurately identify markers for missing anatomic coverage and over-scanning in chest CTs.

Automatic head computed tomography image noise quantification with deep learning

PURPOSE

Computed tomography (CT) image noise is usually determined by standard deviation (SD) of pixel values from uniform image regions. This study investigates how deep learning (DL) could be applied in head CT image noise estimation.

METHODS

Two approaches were investigated for noise image estimation of a single acquisition image: direct noise image estimation using supervised DnCNN convolutional neural network (CNN) architecture, and subtraction of a denoised image estimated with denoising UNet-CNN experimented with supervised and unsupervised noise2noise training approaches. Noise was assessed with local SD maps using 3D- and 2D-CNN architectures. Anthropomorphic phantom CT image dataset (N = 9 scans, 3 repetitions) was used for DL-model comparisons. Mean square error (MSE) and mean absolute percentage errors (MAPE) of SD values were determined using the SD values of subtraction images as ground truth. Open-source clinical head CT low-dose dataset (N_train = 37, N_test = 10 subjects) were used to demonstrate DL applicability in noise estimation from manually labeled uniform regions and in automated noise and contrast assessment.

RESULTS

The direct SD estimation using 3D-CNN was the most accurate assessment method when comparing in phantom dataset (MAPE = 15.5%, MSE = 6.3HU). Unsupervised noise2noise approach provided only slightly inferior results (MAPE = 20.2%, MSE = 13.7HU). 2DCNN and unsupervised UNet models provided the smallest MSE on clinical labeled uniform regions.

CONCLUSIONS

DL-based clinical image assessment is feasible and provides acceptable accuracy as compared to true image noise. Noise2noise approach may be feasible in clinical use where no ground truth data is available. Noise estimation combined with tissue segmentation may enable more comprehensive image quality characterization.

The use of deep learning methods in low-dose computed tomography image reconstruction: a systematic review

Conventional reconstruction techniques, such as filtered back projection (FBP) and iterative reconstruction (IR), which have been utilised widely in the image reconstruction process of computed tomography (CT) are not suitable in the case of low-dose CT applications, because of the unsatisfying quality of the reconstructed image and inefficient reconstruction time. Therefore, as the demand for CT radiation dose reduction continues to increase, the use of artificial intelligence (AI) in image reconstruction has become a trend that attracts more and more attention. This systematic review examined various deep learning methods to determine their characteristics, availability, intended use and expected outputs concerning low-dose CT image reconstruction. Utilising the methodology of Kitchenham and Charter, we performed a systematic search of the literature from 2016 to 2021 in Springer, Science Direct, arXiv, PubMed, ACM, IEEE, and Scopus. This review showed that algorithms using deep learning technology are superior to traditional IR methods in noise suppression, artifact reduction and structure preservation, in terms of improving the image quality of low-dose reconstructed images. In conclusion, we provided an overview of the use of deep learning approaches in low-dose CT image reconstruction together with their benefits, limitations, and opportunities for improvement.

Feasibility of Deep Learning-Based Noise and Artifact Reduction in Coronal Reformation of Contrast-Enhanced Chest Computed Tomography

PURPOSE

This study aimed to evaluate the feasibility of a deep learning method for imaging artifact and noise reduction in coronal reformation of contrast-enhanced chest computed tomography (CT).

METHODS

A total of 19,052 coronal reformatted chest CT images of 110 CT image sets (55 pairs of concordant 16- and 320-row CT image sets) were included and used to train a deep learning algorithm for artifact and noise correction. For internal validation, 4093 coronal reformatted CT images of 25 patients from 16-row CT images underwent correction processing. For external validation, chest CT images of 30 patients (1028 coronal reformatted CT images), acquired in other institutions using different scanners, were subjected to correction processing. For both validations, image quality was compared between original ("CTorigin") and deep learning-based corrected ("CTcorrect") CT images. Quantitative analysis for stair-step artifact (coefficient of variance of CT density on coronal reformation), image noise, signal-to-noise ratio, and contrast-to-noise ratio were evaluated. Subjective image quality scores were assigned for image contrast, artifact, and conspicuity of major structures.

RESULTS

CTcorrect showed significantly reduced stair-step artifact (mean coefficient of variance: CTorigin 7.35 ± 2.0 vs CTcorrect 5.17 ± 2.4, P < 0.001) and image noise and improved signal-to-noise ratio and contrast-to-noise ratio in the aorta, pulmonary artery, and liver, compared with those of CTorigin (P < 0.01). On subjective analysis, CTcorrect had higher image contrast, lower artifact, and better conspicuity than CTorigin. Most results of the external validation were consistent with those obtained from the internal validation, except for those concerning the pulmonary artery.

CONCLUSIONS

Deep learning-based artifact correction significantly improved the image quality of coronal reformation chest CT by reducing image noise and artifacts.

A concise review: the synergy between artificial intelligence and biomedical nanomaterials that empowers nanomedicine

Nanomedicine has recently experienced unprecedented growth and development. However, the complexity of operations at the nanoscale introduces a layer of difficulty in the clinical translation of nanodrugs and biomedical nanotechnology. This problem is further exacerbated when engineering and optimizing nanomaterials for biomedical purposes. To navigate this issue, artificial intelligence (AI) algorithms have been applied for data analysis and inference, allowing for a more applicable understanding of the complex interaction amongst the abundant variables in a system involving the synthesis or use of nanomedicine. Here, we report on the current relationship and implications of nanomedicine and AI. Particularly, we explore AI as a tool for enabling nanomedicine in the context of nanodrug screening and development, brain-machine interfaces and nanotoxicology. We also report on the current state and future direction of nanomedicine and AI in cancer, diabetes, and neurological disorder therapy.

A Survey of Soft Computing Approaches in Biomedical Imaging

Medical imaging is an essential technique for the diagnosis and treatment of diseases in modern clinics. Soft computing plays a major role in the recent advances in medical imaging. It handles uncertainties and improves the qualities of an image. Until now, various soft computing approaches have been proposed for medical applications. This paper discusses various medical imaging modalities and presents a short review of soft computing approaches such as fuzzy logic, artificial neural network, genetic algorithm, machine learning, and deep learning. We also studied and compared each approach used for other imaging modalities based on the certain parameter used for the system evaluation. Finally, based on comparative analysis, the possible research strategies for further development are proposed. As far as we know, no previous work examined this issue.

Dental cone beam CT: An updated review

Cone beam computed tomography (CBCT) is a diverse 3D x-ray imaging technique that has gained significant popularity in dental radiology in the last two decades. CBCT overcomes the limitations of traditional two-dimensional dental imaging and enables accurate depiction of multiplanar details of maxillofacial bony structures and surrounding soft tissues. In this review article, we provide an updated status on dental CBCT imaging and summarise the technical features of currently used CBCT scanner models, extending to recent developments in scanner technology, clinical aspects, and regulatory perspectives on dose optimisation, dosimetry, and diagnostic reference levels. We also consider the outlook of potential techniques along with issues that should be resolved in providing clinically more effective CBCT examinations that are optimised for the benefit of the patient.

Procurement, commissioning and QA of AI based solutions: An MPE's perspective on introducing AI in clinical practice

PURPOSE

In this study, we propose a framework to help the MPE take up a unique and important role at the introduction of AI solutions in clinical practice, and more in particular at procurement, acceptance, commissioning and QA.

MATERIAL AND METHODS

The steps for the introduction of Medical Radiological Equipment in a hospital setting were extrapolated to AI tools. Literature review and in-house experience was added to prepare similar, yet dedicated test methods.

RESULTS

Procurement starts from the clinical cases to be solved and is usually a complex process with many stakeholders and possibly many candidate AI solutions. Specific KPIs and metrics need to be defined. Acceptance testing follows, to verify the installation and test for critical exams. Commissioning should test the suitability of the AI tool for the intended use in the local institution. Results may be predicted from peer reviewed papers that treat representative populations. If not available, local data sets can be prepared to assess the KPIs, or 'virtual clinical trials' could be used to create large, simulated test data sets. Quality assurance must be performed periodically to verify if KPIs are stable, especially if the software is upscaled or upgraded, and as soon as self-learning AI tools would enter the medical practice.

DISCUSSION

MPEs are well placed to bridge between manufacturer and medical team and help from procurement up to reporting to the management board. More work is needed to establish consolidated test protocols.

Artificial intelligence and machine learning for medical imaging: A technology review

Artificial intelligence (AI) has recently become a very popular buzzword, as a consequence of disruptive technical advances and impressive experimental results, notably in the field of image analysis and processing. In medicine, specialties where images are central, like radiology, pathology or oncology, have seized the opportunity and considerable efforts in research and development have been deployed to transfer the potential of AI to clinical applications. With AI becoming a more mainstream tool for typical medical imaging analysis tasks, such as diagnosis, segmentation, or classification, the key for a safe and efficient use of clinical AI applications relies, in part, on informed practitioners. The aim of this review is to present the basic technological pillars of AI, together with the state-of-the-art machine learning methods and their application to medical imaging. In addition, we discuss the new trends and future research directions. This will help the reader to understand how AI methods are now becoming an ubiquitous tool in any medical image analysis workflow and pave the way for the clinical implementation of AI-based solutions.

Evaluation of Organ Dose and Image Quality Metrics of Pediatric CT Chest-Abdomen-Pelvis (CAP) Examination: An Anthropomorphic Phantom Study

The aim of this study is to investigate the impact of CT acquisition parameter setting on organ dose and its influence on image quality metrics in pediatric phantom during CT examination. The study was performed on 64-slice multidetector CT scanner (MDCT) Siemens Definition AS (Siemens Sector Healthcare, Forchheim, Germany) using various CT CAP protocols (P1–P9). Tube potential for P1, P2, and P3 protocols were fixed at 100 kVp while P4, P5, and P6 were fixed at 80 kVp with used of various reference noise values. P7, P8, and P9 were the modification of P1 with changes on slice collimation, pitch factor, and tube current modulation (TCM), respectively. TLD-100 chips were inserted into the phantom slab number 7, 9, 10, 12, 13, and 14 to represent thyroid, lung, liver, stomach, gonads, and skin, respectively. The image quality metrics, signal to noise ratio (SNR) and contrast to noise ratio (CNR) values were obtained from the CT console. As a result, this study indicates a potential reduction in the absorbed dose up to 20% to 50% along with reducing tube voltage, tube current, and increasing the slice collimation. There is no significant difference (p > 0.05) observed between the protocols and image metrics.