A custom tailored model to investigate skin penetration in porcine skin and its comparison with human skin

Ceramide Profiling of Porcine Skin and Systematic Investigation of the Impact of Sorbitan Esters (SEs) on the Barrier Function of the Skin

The stratum corneum (SC) lipids provide the main barrier of the skin against the environment. Ceramides make up about half of the lipids by weight and are thus of particular interest. Emulsifiers are used in a multitude of topical formulations, e.g., to stabilize emulsions against coalescence. Investigations showed that some emulsifiers have the potential to impair skin barrier function. Sorbitan esters (SEs) are frequently used emulsifiers in pharmaceutical and cosmetic dermal formulations. Further, cholesterol and lecithin were used as natural alternatives. However, information on their impact on ceramides is very scarce. Thus, we first analyzed the SEs by LC-MS with regard to their composition. Then we developed an LC-MS method to identify and quantify the ceramides in porcine skin and subsequently investigated the impact of emulsifiers on the ceramide profile. Besides the LC-MS measurements, the effect of emulsifiers on the skin barrier function was investigated by trans-epidermal water loss (TEWL) measurements and confocal Raman spectroscopy (CRS). Throughout the experiments, water was used as a negative control and sodium lauryl sulfate (SLS) as a positive control. It was found that SEs are mixtures of mono-, di-, and triesters, partially with a complex fatty acid distribution. LC-MS measurements of the total ceramide content of the SC samples revealed the SE 60 and cholesterol-treated samples to be those showing the least ceramide depletion, implying a high skin tolerability in general. The TEWL measurements showed that SEs 40, 60, 80, and 120 showed no significant changes in skin barrier function. The lipid content, measured by CRS, was mostly decreased except for SE 120. Conformation, chain order, and SC thickness, also measured by CRS, showed no significant differences. These detailed investigations lead to the view that SEs are skin-friendly substances and can be used for topical applications, e.g., those commonly used to treat skin diseases.

Design and characterization of κ-Carrageenan:PVA hydrogels to repurpose the topical delivery of betamethasone

Atopic dermatitis (AD) is a severe inflammatory skin disorder, affecting children and adults worldwide, and despite the several existing treatments, it is necessary to find new alternative topical therapies. Hydrogels may represent a good tool to treat AD due to their high water content, making them excellent candidates for drug delivery vehicles in skin research. This work aimed to develop and characterize hybrid hydrogels composed of gel-forming polymers (k-carrageenan and polyvinyl alcohol) for cutaneous delivery of betamethasone (up to 0.2 mg mL-1) widely used to manage AD, with high skin retention. Bergamot oil and menthol essential oils were also incorporated into the hydrogels to study their effects on penetration and retention of the corticosteroid. Rheological properties revealed the pseudoplastic behavior of the hydrogels, a favorable characteristic for skin application. Cytocompatibility towards fibroblasts and keratinocytes was determined, revealing safe usage of the hydrogel blends up to 100 mg mL-1, corresponding to 20 µg mL-1 in betamethasone, but was compromised by the presence of the essential oils in the higher hydrogel tested concentrations (50 and 100 mg mL-1). The ex vivo pig ear skin permeation assay showed that hydrogels promote betamethasone retention up to 20 % of the added dose (c.a. 10 µg) even after 24 h of permeation, independently of the use of essential oils' use in the composition, showing that they might be a good strategy to treat AD skin.

Investigation of the suitability of confocal Raman spectroscopy for the demonstration of bioequivalence of topical products

Bioequivalence studies of topical formulations have attracted increased interest as the European Medicines Agencies "Guideline on quality and equivalence on locally applied, locally acting cutaneous products" describes them in the context of the approval of generics. Since the guideline only proposes tape stripping as a destructive method for bioequivalence testing in in vitro skin penetration, the aim of this study was to investigate the suitability of confocal Raman spectroscopy (CRS) as a non-destructive alternative. To validate the CRS results, tape stripping and CRS experiments using ketoprofen as a model API were performed consecutively on the same samples of ex vivo porcine skin after frozen storage and compared. All experiments were also carried out on two different animal test subjects to investigate a possible influence of inter-individual variations. Furthermore, the influence of the chosen incubation times inside and outside of the steady state was determined. We were able to show that CRS and tape stripping results were very similar both in overall detected API amounts as well as in the results of bioequivalence testing, proving CRS is not only suitable for quantitative skin penetration experiments but also for bioequivalence testing. Inter-individual variations were found to be relevant when comparing formulations measured on different subjects. Bioequivalence testing however reached the same results on both subjects. Finally, the chosen incubation time was limited by skin disintegration, the reaching of steady state however did not influence the results of bioequivalence testing.

Opportunities of topical drug products in a changing dermatological landscape

Despite the prevalence and the impact on quality of life of dermatological indications, drug products to treat such conditions have rarely been blockbusters. The prevailing perception of a limited commercial potential of dermatological drug products has restricted innovation and encouraged a more conservative development approach. For example, the focus was on repurposing/reformulation of existing active pharmaceutical ingredients (APIs) specifically for the topical delivery route. However, the situation is quite different today catalyzed in part by the blockbuster success of Dupixent (dupilumab), the first monoclonal antibody treatment for atopic dermatitis which has been approved by the US Food and Drug Administration (US FDA) in 2017. Dupixent's success not only encouraged the development of other biologics but also inspired the (re-)development of new dermal drug products that can reap the many benefits of topical administration. We have also witnessed a shift toward outsourcing development efforts (and associated risks) towards small- to mid-size pharmaceutical companies which often require support of contract research and development/manufacturing organizations (CRO and CDMO). Such trends also emphasize the need of greater expertise in topical formulation design, as well as associated commercial and regulatory considerations. Today, we believe that topical drug products remain not only an essential but also commercially viable class of dermatological therapeutics. In this opinion article, we will address the challenges as well as opportunities of coherent development strategies in the current market environment, formulation innovations of topical drug products and technological advances to facilitate rational topical drug formulation development.

Targeting S. aureus Extracellular Vesicles: A New Putative Strategy to Counteract Their Pathogenic Potential

Long-term inflammatory skin disease atopic dermatitis is characterized by dry skin, itching, and eczematous lesions. During inflammation skin barrier protein impairment promotes S. aureus colonisation in the inflamed skin, worsening AD patient's clinical condition. Proteomic analysis revealed the presence of several immune evasion proteins and virulence factors in S. aureus extracellular vesicles (EVs), suggesting a possible role for these proteins in the pathophysiology of atopic dermatitis. The objective of this study is to assess the efficacy of a wall fragment obtained from a patented strain of C. acnes DSM28251 (c40) and its combination with a mucopolysaccharide carrier (HAc40) in counteract the pathogenic potential of EVs produced by S. aureus ATCC 14458. Results obtained from in vitro studies on HaCaT keratinocyte cells showed that HAc40 and c40 treatment significantly altered the size and pathogenicity of S. aureus EVs. Specifically, EVs grew larger, potentially reducing their ability to interact with the target cells and decreasing cytotoxicity. Additionally, the overexpression of the tight junctions mRNA zona occludens 1 (ZO1) and claudin 1 (CLDN1) following EVs exposure was decreased by HAc40 and c40 treatment, indicating a protective effect on the epidermal barrier's function. These findings demonstrate how Hac40 and c40 may mitigate the harmful effects of S. aureus EVs. Further investigation is needed to elucidate the exact mechanisms underlying this interaction and explore the potential clinical utility of c40 and its mucopolysaccharide carrier conjugate HAc40 in managing atopic dermatitis.

Composition and structure analysis of different depths in the stratum corneum using confocal Raman microscopy combined with two-dimensional correlation spectroscopy

The chemical composition and structure of the stratum corneum (SC) play a crucial role in the skin barrier function. Therefore, accurately determining the SC thickness and studying the changes in lipid and keratin structure and distribution within it are key aspects of skin barrier research. Currently, there are limited analytical tools and data analysis methods available for real-time and online studies of SC composition and structural changes. In this study, we focus on depth as a perturbation and employ confocal Raman microscopy combined with moving-window two-dimensional correlation spectroscopy (MW2D) technique to investigate the SC thickness. Additionally, we employ confocal Raman microscopy combined with perturbation-correlation moving-window two-dimensional correlation spectroscopy (PCMW2D) to precisely characterize the stratification of the SC. Furthermore, the two-dimensional correlation spectroscopy (2DCOS) method is utilized to examine the content of various conformations in the keratin secondary structure within the SC, as well as the subtle interrelationships between lipid and keratin structures.

Effect of Penetration Enhancer on the Structure of Stratum Corneum: On-Site Study by Confocal Polarized Raman Imaging

Keratin and lipid structures in the stratum corneum (SC) are closely related to the SC barrier function. The application of penetration enhancers (PEs) disrupts the structure of SC, thereby promoting infiltration. To quantify these PE-induced structural changes in SC, we used confocal Raman imaging (CRI) and polarized Raman imaging (PRI) to explore the integrity and continuity of keratin and lipid structures in SC. The results showed that water is the safest PE and that oleic acid (OA), sodium dodecyl sulfate (SDS), and low molecular weight protamine (LMWP) disrupted the ordered structure of keratin, while azone and liposomes had less of an effect on keratin. Azone, OA, and SDS also led to significant changes in lipid structure, while LMWP and liposomes had less of an effect. Establishing this non-invasive and efficient strategy will provide new insights into transdermal drug delivery and skin health management.

Recreating Human Skin In Vitro: Should the Microbiota Be Taken into Account?

Skin plays crucial roles in the human body: besides protecting the organism from external threats, it acts as a thermal regulator, is responsible for the sense of touch, hosts microbial communities (the skin microbiota) involved in preventing the invasion of foreign pathogens, contains immunocompetent cells that maintain a healthy immunogenic/tolerogenic balance, and is a suitable route for drug administration. In the skin, four defense levels can be identified: besides the physical, chemical, and immune barriers that are inherent to the tissue, the skin microbiota (i.e., the numerous microorganisms living on the skin surface) provides an additional barrier. Studying the skin barrier function or the effects of drugs or cosmetic agents on human skin is a difficult task since snapshot evidence can only be obtained using bioptic samples where dynamic processes cannot properly be followed. To overcome these limitations, many different in vitro models of human skin have been developed that are characterized by diverse levels of complexity in terms of chemical, structural, and cellular composition. The aim of this review is to summarize and discuss the advantages and disadvantages of the different human skin models so far available and to underline how the insertion of a proper microbiota would positively impact an in vitro human skin model in an attempt to better mimic conditions in vivo.

Methods for the characterisation of dermal uptake: Progress and perspectives for organophosphate esters

Organophosphate esters (OPEs) are a group of pollutants that are widely detected in the environment at high concentrations. They can adversely affect human health through multiple routes of exposure, including dermal uptake. Although attention has been paid to achieving an accurate and complete quantification of the dermal uptake of OPEs, existing evaluation methods and parameters have obvious weaknesses. This study reviewed two main categories of methodologies, namely the relative absorption (RA) model and the permeability coefficient (PC) model, which are widely used to assess the dermal uptake of OPEs. Although the PC model is more accurate and is increasingly used, the most important parameter in this model, the permeability coefficient (Kp), has been poorly characterised for OPEs, resulting in considerable errors in the estimation of the dermal uptake of OPEs. Thus, the detailed in vitro methods for the determination of Kp are summarised and sorted. Furthermore, the commonly used skin membranes are identified and the factors affecting Kp and corresponding mechanisms are discussed. In addition, the experimental conditions, conclusions, and available data on Kp values of the OPEs are thoroughly summarised. Finally, the corresponding knowledge gaps are proposed, and a more accurate and sophisticated experimental system and unknown Kp values for OPEs are suggested.

Ex vivo transdermal delivery of 3H-labelled atovaquone solid drug nanoparticles: a comparison of topical, intradermal injection and microneedle assisted administration

Inherent barrier properties of the skin impose significant challenges to the transdermal delivery of drugs to systemic circulation. Here, the ex vivo transdermal permeation and deposition of an anti-malarial prophylactic atovaquone solid drug nanoformulation is radiometrically evaluated following application of a solid microneedle format.

Rational Design of Topical Semi-Solid Dosage Forms-How Far Are We?

Specific aspects of semi-solid dosage forms for topical application include the nature of the barrier to be overcome, aspects of susceptibility to physical and chemical instability, and a greater influence of sensory perception. Advances in understanding the driving forces of skin penetration as well as the design principles and inner structure of formulations, provide a good basis for the more rational design of such dosage forms, which still often follow more traditional design approaches. This review analyses the opportunities and constraints of rational formulation design approaches in the industrial development of new topical drugs. As the selection of drug candidates with favorable physicochemical properties increases the speed and probability of success, models for drug selection based on theoretical and experimental approaches are discussed. This paper reviews how progress in the scientific understanding of mechanisms and vehicle-influence of skin penetration can be used for rational formulation design. The characterization of semi-solid formulations is discussed with a special focus on modern rheological approaches and analytical methods for investigating and optimizing the chemical stability of active ingredients in consideration of applicable guidelines. In conclusion, the combination of a good understanding of scientific principles combined with early consideration of regulatory requirements for product quality are enablers for the successful development of innovative and robust semi-solid formulations for topical application.

A Wall Fragment of Cutibacterium acnes Preserves Junctional Integrity Altered by Staphylococcus aureus in an Ex Vivo Porcine Skin Model

(1) Background alteration of the skin microbiota, dysbiosis, causes skin barrier impairment resulting in disease development. Staphylococcus aureus, the main pathogen associated with dysbiosis, secretes several virulence factors, including α-toxin that damages tight junctions and compromises the integrity of the skin barrier. The use of members of the resident microbiota to restore the skin barrier, bacteriotherapy, represents a safe treatment for skin conditions among innovative options. The aim of this study is the evaluation of a wall fragment derived from a patented strain of Cutibacterium acnes DSM28251 (c40) alone and conjugated to a mucopolysaccharide carrier (HAc40) in counteracting S. aureus pathogenic action on two tight junction proteins (Claudin-1 and ZO-1) in an ex vivo porcine skin infection model. Methods: skin biopsies were infected with live S. aureus strains ATCC29213 and DSM20491. Tissue was pre-incubated or co-incubated with c40 and HAc40. (3) Results: c40 and HAc40 prevent and counteract Claudin-1 and Zo-1 damage (4) Conclusions: c40 and the functional ingredient HAc40 represent a potential non-pharmacological treatment of skin diseases associated with cutaneous dysbiosis of S. aureus. These findings offer numerous avenues for new research.

Assessment of penetration and permeation of caffeine by confocal Raman spectroscopy in vivo and ex vivo by tape stripping

OBJECTIVE

Tape stripping is an often-used non-invasive destructive method to investigate the skin penetration of a substance. In recent years, however, the suitability of confocal Raman spectroscopy (CRS) as a non-invasive method of non-destructive examination of the skin has become increasingly apparent. In this study, we compared invasion and depletion penetration and permeation kinetics of a 2% caffeine solution with and without 1,2-pentanediol as a penetration enhancer measured with CRS and tape stripping.

METHODS

Porcine skin was used for tape stripping and human skin for CRS. 2% caffeine solution was applied to the skin for different incubation times. Human skin was then examined by CRS while caffeine was extracted from porcine skin and quantified via reverse-phase HPLC. Fluxes were also measured and calculated by sum of the total amounts of caffeine penetrated into the skin.

RESULTS

Without penetration enhancers, there is hardly any difference between the penetration profiles of the two measurement methods for invasion, but the curves for depletion are different. Furthermore, the calculated flux values for the invasion are almost identical, but for the depletion the tape stripping values are about twice as high as the CRS values.

CONCLUSION

The relevance of conducting invasion and depletion studies became clear and was able to show the still existing problems in the comparability of CRS and tape stripping.

Evaluating the Skin Interactions and Permeation of Alginate/Fucoidan Hydrogels Per Se and Associated with Different Essential Oils

Marine polysaccharides are recognized for their biological properties and their application in the drug delivery field, favoring hydrogel-forming capacities for cutaneous application towards several dermatological conditions. Essential oils have been widely used in skin, not only for their remarkable biological properties, but also for their capacity to enhance permeation through the skin layers and to confer a pleasant scent to the formulation. In this study, menthol, L-linalool, bergamot oil, and β-pinene were incorporated in alginate/fucoidan hydrogels to evaluate their skin permeation enhancement profile and assess their influence on the skin organization. The combinations of different essential oils with the marine-based fucoidan/alginate hydrogel matrix were characterized, resulting in formulations with pseudoplastic rheological properties favorable for a uniform application in the skin. The ex vivo Franz diffusion permeation assays revealed that calcein loaded in bergamot-alginate/fucoidan hydrogel permeated more than 15 mg out of the initial 75 mg than when in linalool-alginate/fucoidan, alginate/fucoidan or hydrogel without any incorporated oil. Skin calcein retention for menthol- and pinene-alginate/fucoidan hydrogels was 15% higher than in the other conditions. Infrared micro-spectroscopic analysis through synchrotron-based Fourier Transform Infrared Microspectroscopy evidenced a symmetric shift in CH₃ groups towards higher wavenumber, indicating lipids' fluidization and less lateral packing, characterized by a band at 1468 cm^-1, with the bergamot-alginate/fucoidan, which contributes to enhancing skin permeation. The study highlights the effect of the composition in the design of formulations for topical or transdermal delivery systems.

Comparison Between Franz Diffusion Cell and a novel Micro-physiological System for In Vitro Penetration Assay Using Different Skin Models

In vitro diffusive models are an important tool to screen the penetration ability of active ingredients in various formulations. A reliable assessment of skin penetration enhancing properties, mechanism of action of carrier systems, and an estimation of a bioavailability are essential for transdermal delivery. Given the importance of testing the penetration kinetics of different compounds across the skin barrier, several in vitro models have been developedThe aim of this study was to compare the Franz Diffusion Cell (FDC) with a novel fluid-dynamic platform (MIVO) by evaluating penetration ability of caffeine, a widely used reference substance, and LIP1, a testing molecule having the same molecular weight but a different lipophilicity in the two diffusion chamber systems. A 0.7% caffeine or LIP1 formulation in either water or propylene glycol (PG) containing oleic acid (OA) was topically applied on the Strat-M® membrane or pig ear skin, according to the infinite-dose experimental condition (780 ul/cm²). The profile of the penetration kinetics was determined by quantify the amount of molecule absorbed at different time-points (1, 2, 4, 6, 8 hours), by means of HPLC analysis. Both diffusive systems show a similar trend for caffeine and LIP1 penetration kinetics. The Strat-M® skin model shows a lower barrier function than the pig skin biopsies, whereby the PGOA vehicle exhibits a higher penetration, enhancing the effect for both diffusive chambers and skin surrogates. Most interestingly, MIVO diffusive system better predicts the lipophilic molecules (i.e. LIP1) permeation through highly physiological fluid flows resembled below the skin models.

Polydopamine modified acellular dermal matrix sponge scaffold loaded with a-FGF: Promoting wound healing of autologous skin grafts

Despite increasing potentials as a skin regeneration template (DRT) to guide tissue healing, acellular dermal matrix (ADM) is still challenged by issues (like dense architecture, low cellular adhesion and poor vascularization), contributing to necrosis and shedding of upper transplanted skins. Modified with polydopamine (PDA), a novel and porous DRT capable of drug delivery was designed using porcine-derived ADM (PADMS) gels, termed PDA-PADMS. However, it was unclear whether it could efficiently deliver human acidic fibroblast growth factor (a-FGF) and regenerate skin defects. Herein, after being fabricated and optimized with PADMS gels in different ratios (1:6, 1:7, 1:8), PDA-PADMS loading a-FGF (PDA-PADMS-FGF) was evaluated by the morphology, physical& chemical properties, drug release and in-vitro biological evaluations, followed by full-thickness skin defects implanted with PDA-PADMS-FGF covered by transplanted skins. Apart from containing abundant collagen and elastin, porous PADMS (with a loose and uniform structure) was demonstrated to possess controlled release of a-FGF and biocompatibility attributed to PDA coating. Consistent with augmented cellular migration and proliferation in vitro, PDA-PADMS-FGF also accelerated wound healing and reduced scarring, improving collagen arrangement and neovascularization. In conclusion, PDA-PADMS-FGF has a good potential and application prospect as a matrix material for wound repair.

Assessing the Dermal Penetration Efficacy of Chemical Compounds with the Ex-Vivo Porcine Ear Model

(1) Background: The ex vivo porcine ear model is often used for the determination of the dermal penetration efficacy of chemical compounds. This study investigated the influence of the post-slaughter storage time of porcine ears on the dermal penetration efficacy of chemical compounds. (2) Methods: Six different formulations (curcumin and different fluorescent dyes in different vehicles and/or nanocarriers) were tested on ears that were (i) freshly obtained, (ii) stored for 24 or 48 h at 4 °C after slaughter before use and (iii) freshly frozen and defrosted 12 h before use. (3) Results: Results showed that porcine ears undergo post-mortem changes. The changes can be linked to rigor mortis and all other well-described phenomena that occur with carcasses after slaughter. The post-mortem changes modify the skin properties of the ears and affect the penetration efficacy. The onset of rigor mortis causes a decrease in the water-holding capacity of the ears, which leads to reduced penetration of chemical compounds. The water-holding capacity increases once the rigor is released and results in an increased penetration efficacy for chemical compounds. Despite different absolute penetration values, no differences in the ranking of penetration efficacies between the different formulations were observed between the differently aged ears. (4) Conclusions: All different types of ears can be regarded to be suitable for dermal penetration testing of chemical compounds. The transepidermal water loss (TEWL) and/or skin hydration of the ears were not correlated with the ex vivo penetration efficacy because both an impaired skin barrier and rigor mortis cause elevated skin hydration and TEWL values but an opposite penetration efficacy. Other additional values (for example, pH and/or autofluorescence of the skin) should, therefore, be used to select suitable and non-suitable skin areas for ex vivo penetration testing. Finally, data from this study confirmed that smartFilms and nanostructured lipid carriers (NLC) represent superior formulation strategies for efficient dermal and transdermal delivery of curcumin.

Comparison of Membrane Depth Determination Techniques for Active Ingredient Skin Penetration Studies Using Microdialysis

INTRODUCTION

The skin is a major physical barrier to the environment, and thus, percutaneous delivery of active ingredients to the dermal target site faces a unique set of hurdles. The efficacy of these active ingredients is governed by their release into the underlying epidermal and dermal tissue, especially when administered topically.

OBJECTIVE

The aim of this study was to understand if different physicochemical properties influence the skin penetration of active ingredients and the depth to which they penetrate into the dermis.

METHODS

A microdialysis (MD) setup was used to compare the percutaneous penetration in superficial and deep implanted MD membranes in porcine skin. The precise MD membrane depth was determined using histological sectioning paired with microscopy, ultrasound, and a novel computed tomographic approach.

RESULTS

In study A, the measured depth of the superficial and deep implanted MD membranes was compared using histological sectioning, ultrasound, and computed tomography. Experimental determination of the depth up to which penetration occurs was found to be crucial to percutaneous penetration studies. In study B, the lipophilic differences of the active ingredients and its influences on the penetration was tested using hydrophilic caffeine and lipophilic LIP1 as model compounds, which have an identical molecular weight with different lipophilic characteristics. It is assumed that the lipophilic characteristics of active ingredients influence their penetration and thus governs the concentration of these molecules reaching their target site.

CONCLUSION

The transdermal penetration of caffeine was found to exceed that of LIP1 through the hydrophilic environment of the dermis. Thus, the findings of this study show that the precise MD dermis localization and the physicochemical properties, such as lipophilicity, influence the penetration rate of active ingredients and lay the foundation for creating optimized transdermal delivery systems.

Caudal Spine Morphology and Puncture Performance of Two Coastal Stingrays

A diagnostic characteristic of stingrays in the family Dasyatidae is the presence of a defensive, partially serrated spine located on the tail. We assessed the contribution of caudal spine morphology on puncture and withdrawal performance from two congeneric, co-occurring stingrays, the Atlantic stingray, Hypanus sabinus, and the bluntnose stingray, Hypanus say. Spines exhibited a high degree of morphological variability. Stingray spines were serrated along 50.8% (H. sabinus) or 62.3% (H. say) of their length. Hypanus say had a greater number of serrations along each side of the spine (30.4) compared with H. sabinus (20.7) but the pitch did not differ between species. We quantified spine puncture and withdrawal forces using porcine skin as a model for human skin. Puncture and withdrawal forces did not differ significantly between species, or within H. say, but withdrawal force was greater than puncture force for H. sabinus. We incorporated micro-computed tomography scanning to quantify tissue mineral density and found that for both species, the shaft of the spine was more heavily mineralized than the base, and midway (50%) along the length of the spine was more heavily mineralized than the tip. The mineralization variability along the spine shaft may create a stiff structure that can fracture once embedded within the target tissue and act as an effective predator deterrent.

Animal- free skin permeation analysis using mass spectrometry imaging

Here we demonstrate an animal-free skin permeation analytical approach suitable for testing pharmaceuticals, cosmetics, occupational skin hazards and skin allergens. The method aims to replace or significantly reduce existing in-vivo models and improve on already established in-vitro models. This by offering a more sensitive and flexible analytical approach that can replace and/or complement existing methods in the OECD guidelines for skin adsorption (no 427 and no 428) and measure multiple compounds simultaneously in the skin while being able to also trace endogenous effects in cells. We demonstrate this here by studying how active ingredients in sunscreen permeate through left-over human skin, from routine surgery, in a in a Franz-cell permeation model. Two common sunscreens were therefore applied to the human skin and Time of flight secondary ion mass spectrometry (ToF-SIMS) was used to trace the molecules through the skin. We show that that ToF-SIMS imaging can be applied in visualizing the distribution of Avobenzone, Bemotrizinol, Biscotrizole and Ethyl hexyl triazine at subcellular resolution in the skin. The UV-blockers could be visualized at the same time in one single experiment without any probes or antibodies used. The UV-blockers mostly remained in the stratum corneum. However, in certain features of the skin, such as sebaceous glands, the penetration of the UV-blockers was more prominent, and the compounds reached deeper into the epidermis.

Investigation of transfollicular caffeine penetration using microdialysis on ex vivo porcine ear skin

The aim of this study was to develop an ex vivo method that allows to quantify the transfollicular penetration of topically applied substances by combining microdialysis and selective follicular closure with varnish. An experimental setup with three skin areas on ex vivo intact porcine ear skin was designed (varnish on hair follicle, varnish next to hair follicle, no varnish). On each area, 10 µl/cm² caffeine-hydroxyethyl-cellulose-gel was applied. Samples were collected for 22 h by microdialysis. After sampling, the skin layers were separated, homogenized and caffeine was quantified by high pressure liquid chromatography (HPLC) in all samples. Potential impact of the varnish placed next to the follicle by tension on the follicle during the drying process was monitored by a microscopic setup and could be excluded. The microdialysis and homogenization study showed a significantly reduced penetration of caffeine when the hair follicles were closed. In areas with open hair follicles caffeine was detected already in the first ten minutes after application. The reported novel combination of two methods is suitable to investigate ex vivo transfollicular penetration. Possible impact of the closure material in the control area can be ruled out by adjusting the design of the control area in future studies.

Skin Barriers in Dermal Drug Delivery: Which Barriers Have to Be Overcome and How Can We Measure Them?

Although, drugs are required in the various skin compartments such as viable epidermis, dermis, or hair follicles, to efficiently treat skin diseases, drug delivery into and across the skin is still challenging. An improved understanding of skin barrier physiology is mandatory to optimize drug penetration and permeation. The various barriers of the skin have to be known in detail, which means methods are needed to measure their functionality and outside-in or inside-out passage of molecules through the various barriers. In this review, we summarize our current knowledge about mechanical barriers, i.e., stratum corneum and tight junctions, in interfollicular epidermis, hair follicles and glands. Furthermore, we discuss the barrier properties of the basement membrane and dermal blood vessels. Barrier alterations found in skin of patients with atopic dermatitis are described. Finally, we critically compare the up-to-date applicability of several physical, biochemical and microscopic methods such as transepidermal water loss, impedance spectroscopy, Raman spectroscopy, immunohistochemical stainings, optical coherence microscopy and multiphoton microscopy to distinctly address the different barriers and to measure permeation through these barriers in vitro and in vivo.

Freeze-Dried Softisan® 649-Based Lipid Nanoparticles for Enhanced Skin Delivery of Cyclosporine A

Inflammatory skin diseases, including psoriasis and atopic dermatitis, affect around one quarter to one third of the world population. Systemic cyclosporine A, an immunosuppressant agent, is included in the current therapeutic armamentarium of these diseases. Despite being highly effective, it is associated with several side effects, and its topical administration is limited by its high molecular weight and poor water solubility. To overcome these limitations, cyclosporine A was incorporated into solid lipid nanoparticles obtained from Softisan^® 649, a commonly used cosmetic ingredient, aiming to develop a vehicle for application to the skin. The nanoparticles presented sizes of around 200 nm, low polydispersity, negative surface charge, and stability when stored for 8 weeks at room temperature or 4 °C. An effective incorporation of 88% of cyclosporine A within the nanoparticles was observed, without affecting its morphology. After the freeze-drying process, the Softisan^® 649-based nanoparticles formed an oleogel. Skin permeation studies using pig ear as a model revealed low permeation of the applied cyclosporine A in the freeze-dried form of the nanoparticles in relation to free drug and the freshly prepared nanoparticles. About 1.0 mg of cyclosporine A was delivered to the skin with reduced transdermal permeation. These results confirm local delivery of cyclosporine A, indicating its promising topical administration.

Solvent-Containing Closure Material Can Be Used to Prevent Follicular Penetration of Caffeine and Fluorescein Sodium Salt on Porcine Ear Skin

AIM

The skin represents a drug delivery portal. The establishment of a skin model capable of distinguishing between the follicular and intercellular penetration pathways remains a challenge. The study described herein was aimed at showing the influence of two nail varnishes as closure material and four application techniques to spread the active pharmaceutical ingredient (API) on a successful follicular closure without inducing penetration-enhancing effects.

MATERIALS AND METHODS

For all experiments, ex vivo porcine ear skin was used. In study design A, a standard and a solvent-free nail varnish were compared. It was tested whether the different application techniques (spreading with pipette, careful finger massage, 5-Hz finger massage, 5-Hz automatic massage) potentially destroy an intact follicular closure. Laser scanning microscopy imaging was used to measure if the model drug (fluorescein sodium salt) penetrated into the hair follicles. Study design B investigated how the penetration is affected when applying standard nail varnish containing solvents to skin. It was tested if the varnish blocks the API (caffeine) on completely covered areas and if adjacent areas show increased penetration. Furthermore, lateral diffusion of the API was investigated. After 20 h, the skin layers were separated by tape stripping and heat separation. The tissue samples were homogenized. Caffeine was quantified by chromatography.

RESULTS

In study design A, the standard nail varnish showed a secure follicular closure, while the solvent-free nail varnish was not able to prevent follicular penetration. Moreover, rapid application techniques were found to destroy an intact follicular closure. Only the two most gentle application techniques kept the follicular closing intact. In study design B, no caffeine was detected in both skin areas that were completely covered. Since no significant difference in caffeine penetration between the two uncovered groups was found, any influence of the applied closure material on adjacent areas was excluded.

CONCLUSION

This study clearly demonstrates that a standard nail varnish in combination with a gentle application technique of the API provides a secure follicular closure. The presented study only investigated the closure for the substances caffeine and fluorescein sodium salt. The results might not be transferable to all kinds of APIs.

Formulation of survival acceptor medium able to maintain the viability of skin explants over in vitro dermal experiments

OBJECTIVE

In vitro assessments of skin absorption of xenobiotics are essential for toxicological evaluations and bioavailability studies of cosmetic and pharmaceutical ingredients. Since skin metabolism can greatly contribute to xenobiotic absorption, experiments need to be performed with skin explants kept viable in suitable survival media. Existing protocols for non-viable skin are modified to consider those conditions. The objective was to design a survival medium used as an acceptor fluid in Franz cells for testing cutaneous penetration of hydrophilic or lipophilic molecules. Their metabolism inside skin may be investigated under the same conditions. The determining factors involved in survival mechanisms in vitro are discussed. The consequences of short-term skin preservation at 4°C were also evaluated.

METHODS

The metabolic activity of fresh skin samples mounted in Franz cells was studied by measurement of lactate release over 24 h in order to assess the impacts of pH, buffering, osmolality, ionic strength, initial glucose supply and the addition of ethanol or non-ionic surfactant in the acceptor part of Franz cells.

CONCLUSION

Survival media must maintain physiological pH (>5.5) be isotonic with skin cells (300 mOsm kg^-1 ) and contain at least 0.5 g L^-1 glucose. Several compositions able to preserve skin metabolism are reported. Storage of skin explants overnight at 4°C impairs skin metabolic activity. The present work provides guidelines for designing survival media according to constraints related to the scientific requirements of the experiments.

Core-multishell nanocarriers enhance drug penetration and reach keratinocytes and antigen-presenting cells in intact human skin

In reconstructed skin and diffusion cell studies, core-multishell nanocarriers (CMS-NC) showed great potential for drug delivery across the skin barrier. Herein, we investigated penetration, release of dexamethasone (DXM), in excised full-thickness human skin with special focus on hair follicles (HF). Four hours and 16 h after topical application of clinically relevant dosages of 10 μg DXM/cm² skin encapsulated in CMS-NC (12 nm diameter, 5.8% loading), presence of DXM in the tissue as assessed by fluorescence microscopy of anti-DXM-stained tissue sections as well as ELISA and HPLC-MS/MS in tissue extracts was enhanced compared to standard LAW-creme but lower compared to DXM aqueous/alcoholic solution. Such enhanced penetration compared to conventional cremes offers high potential for topical therapies, as recurrent applications of corticosteroid solutions face limitations with regard to tolerability and fast drainage. The findings encourage more detailed investigations on where and how the nanocarrier and drug dissociate within the skin and what other factors, e.g. thermodynamic activity, influence the penetration of this formulations. Microscopic studies on the spatial distribution within the skin revealed accumulation in HF and furrows accompanied by limited cellular uptake assessed by flow cytometry (up to 9% of total epidermal cells). FLIM clearly visualized the presence of CMS-NC in the viable epidermis and dermis. When exposed in situ a fraction of up to 25% CD1a⁺ cells were found within the epidermal CMS-NC⁺ population compared to approximately 3% CD1a⁺/CMS-NC⁺ cells after in vitro exposure in short-term cultures of epidermal cell suspensions. The latter reflects the natural percentage of Langerhans cells (LC) in epidermis suspensions and indicated that CMS-NC were not preferentially internalized by one cell type. The increased CMS-NC⁺ LC proportion after exposure within the tissue is in accordance with the strategic suprabasal LC-localization. More specifically we postulate that the extensive dendrite meshwork, their position around HF orifices and their capacity to modulate tight junctions facilitated a preferential uptake of CMS-NC by LC within the skin. This newly identified aspect of CMS-NC penetration underlines the potential of CMS-NC for dermatotherapy and encourages further investigations of CMS-NC for the delivery of other molecule classes for which intracellular delivery is even more crucial.

Investigation of the Compatibility of the Skin PAMPA Model with Topical Formulation and Acceptor Media Additives Using Different Assay Setups

The Skin Parallel Artificial Membrane Permeability Assay (PAMPA) is a 96-well plate-based skin model with an artificial membrane containing free fatty acid, cholesterol, and synthetic ceramide analogs to mimic the stratum corneum (SC) barrier. The current study evaluates the compatibility of lipophilic solvents/penetration enhancer, topical emulsions containing different emulsifier systems, and organic acceptor media additives with the artificial membrane of the assay. Additionally, different assay setups (standard setup: donor in bottom plate versus modified setup: donor in top plate) were compared. Methylparaben (MP), ethylparaben (EP), and propylparaben (PP) were used as model permeants and internal standards for proper assay execution. The permeation order of the parabens (MP > EP > PP) remained the same with different lipophilic solvents, and the ranking of lipophilic solvents was comparable under standard and modified conditions (isopropyl myristate, IPM > dimethyl isosorbide, DMI ≥ propylene glycol, PG > diisopropyl adipate, DIPA). Pre-incubation of the Skin PAMPA plates with IPM, DIPA, and DMI, as well as with formulations that contain non-ionic emulsifiers, and acceptor solutions containing DMSO or EtOH (≤ 50%) for 4 h did not increase the percentage of permeated parabens in the main experiment, suggesting that those compounds do not make the artificial membrane more permeable. High-resolution mass spectrometry confirmed that acceptor solutions with ≤ 50% DMSO or EtOH do not extract stearic acid, cholesterol, and certramides at standard assay conditions. Hence, if certain constraints are considered, the Skin PAMPA model can be used as a pre-screening tool for topical formulation selection.

Biphasic influence of Staphylococcus aureus on human epidermal tight junctions

Bacterial infections (e.g., with Staphylococcus aureus) are serious problems in skin with a compromised barrier, such as in patients with atopic dermatitis. Previously, it was shown that tight junction (TJ) proteins are influenced by staphylococcal infection, and TJ function is impaired after infection of the keratinocyte cell line HaCaT. However, functional studies in cells or models more similar to human skin are missing. Therefore, we investigated bacterial colonialization and infection with live S. aureus in primary human keratinocytes and reconstructed human epidermis (RHE). We show that short-term inoculation results in increased TJ barrier function-which could not be seen in HaCaT cells-hinting at an early protective effect. This is accompanied by occludin phosphorylation and sustained localization of occludin and claudin-4 at cell membranes. Long-term incubation resulted in decreased presence of claudin-1 and claudin-4 at cell membranes and decreased TJ barrier function. The agr regulon of S. aureus plays a role in the increasing but not in the decreasing effect. Proinflammatory cytokines, which are produced as a result of S. aureus inoculation, influence both phases. In summary, we show here that S. aureus can have short-term promoting effects on the TJ barrier, while in the long term it results in disturbance of TJs.

The Influence of Solid Microneedles on the Transdermal Delivery of Selected Antiepileptic Drugs

The aim of this project was to examine the effect of microneedle rollers on the percutaneous penetration of tiagabine hydrochloride and carbamazepine across porcine skin in vitro. Liquid chromatography-mass spectrometric analysis was carried out using an Agilent 1200 Series HPLC system coupled to an Agilent G1969A TOF-MS system. Transdermal flux values of the drugs were determined from the steady-state portion of the cumulative amount versus time curves. Following twelve hours of microneedle roller application, there was a 6.74-fold increase in the percutaneous penetration of tiagabine hydrochloride (86.42 ± 25.66 µg/cm²/h) compared to passive delivery (12.83 ± 6.30 µg/cm²/h). For carbamazepine in 20% ethanol, passive transdermal flux of 7.85 ± 0.60 µg/cm²/h was observed compared to 10.85 ± 0.11 µg/cm²/h after microneedle treatment. Carbamazepine reconstituted in 30% ethanol resulted in only a 1.19-fold increase in drug permeation across porcine skin (36.73 ± 1.83 µg/cm²/h versus 30.74 ± 1.32 µg/cm²/h). Differences in flux values of untreated and microneedle-treated porcine skin using solid microneedles for the transdermal delivery of tiagabine were statistically significant. Although there were 1.38- and 1.19-fold increases in transdermal flux values of carbamazepine when applied as 20% and 30% ethanol solutions across microneedle-treated porcine skin, respectively, the increases were not statistically significant.

In vitro oral drug permeation models: the importance of taking physiological and physico-chemical factors into consideration

INTRODUCTION

The assessment of intestinal membrane permeability properties of new chemical entities is a crucial step in the drug discovery and development process and a variety of in vitro models, methods and techniques are available to estimate the extent of oral drug absorption in humans. However, variations in certain physiological and physico-chemical factors are often not reflected in the results and the complex dynamic interplay between these factors is sometimes oversimplified with in vitro models. Areas covered: In vitro models to evaluate drug pharmacokinetics are briefly outlined, while both physiological and physico-chemical factors that may have an influence on these techniques are critically reviewed. The shortcomings identified for some of the in vitro techniques are discussed in conjunction with novel ways to improve and thereby overcome some challenges. Expert opinion: Although conventional in vitro methods and theories are used as basic guidelines to predict drug absorption, critical evaluations have identified some shortcomings. Advancements in technology have made it possible to investigate and understand the role of physiological and physico-chemical factors in drug delivery more clearly, which can be used to improve and refine the techniques to more closely mimic the in vivo environment.