Preactivated thiolated glycogen as mucoadhesive polymer for drug delivery

Hybrid phytoglycogen-dopamine nanoparticles as biodegradable underwater adhesives

Developing adhesive materials that can selectively degrade into non-toxic by-products is a key challenge in materials science, particularly for short-term implantable devices and tissue regeneration treatments. Herein, we leverage biodegradable phytoglycogen (PG) nanoparticles (highly branched glucose polysaccharide nanoparticles) as scaffolds for coupling adhesive dopamine motifs to be used as biodegradable underwater adhesives. Phytoglycogen-dopamine (PG-dopa) hybrid nanoparticles could be synthesised in an aqueous solvent, to which the products retained a similar size and particle morphology to the initial PG nanoparticles. The PG-dopa nanoparticles could readily be assembled into dense monolayers on silica substrates through a simple dip-coating procedure. Colloidal probe atomic force microscopy was used to characterise underwater adhesiveness, where it was found that the films produced strain energy release rates approaching 8 mJ m-2 between hard silica materials. Importantly, the PG-dopa films retained the original biodegradability towards glucosidase enzymes, which can degrade the adhesives in fluids containing these enzymes over time (e.g., 45 U mL-1 of α-amylase solution degraded the majority of the adhesive films in 30 min). Given the inherent biocompatibility of glycogen materials, we anticipate these adhesives having application in short-term implantable devices.

Thiolated dextrin nanoparticles for curcumin delivery: Stability, in vitro release, and binding mechanism

To achieve the effective loading and delivery of curcumin, novel disulfide-crosslinked nanoparticles based on modified dextrin were developed for the encapsulation of curcumin. Thiolated dextrin (Dt-SH) was obtained via sodium periodate oxidation and cysteamine grafting. The Dt-SH exhibited a rough, flake-like morphology, was classified as an amorphous material and demonstrated enhanced enzyme resistance. Subsequently, spherical nanoparticles with sizes ranging from 92.52 to 157.12 nm and zeta potentials between +23.59 and + 29.90 mV were self-assembled in an aqueous solution. Thiol modification promoted interconnection and aggregation of the nanoparticles. These nanoparticles exhibited pH-dependent size variations. Taking curcumin as a hydrophobic model, nanoparticles showed intestinal targeted release in vitro. Fluorescence spectroscopy and thermodynamic analysis indicated that curcumin bound to Dt-SH nanoparticles primarily through hydrogen bonding and van der Waals forces, with hydrophobic interactions contributing. These findings supported the potential of thiolated dextrin nanoparticles in the effective delivery of hydrophobic compounds.

Recent Advances in Nanodrug Delivery Systems Production, Efficacy, Safety, and Toxicity

In the last three decades, the development of nanoparticles or nano-formulations as drug delivery systems has emerged as a promising tool to overcome the limitations of conventional delivery, potentially to improve the stability and solubility of active molecules, promote their transport across the biological membranes, and prolong circulation times to increase efficacy of a therapy. Despite several nano-formulations having applications in drug delivery, some issues concerning their safety and toxicity are still debated. This chapter describes the recent available information regarding safety, toxicity, and efficacy of nano-formulations for drug delivery. Several key factors can influence the behavior of nanoparticles in a biological environment, and their evaluation is crucial to design non-toxic and effective nano-formulations. Among them, we have focused our attention on materials and methods for their preparation (including the innovative microfluidic technique), mechanisms of interactions with biological systems, purification of nanoparticles, manufacture impurities, and nano-stability. This chapter places emphasis on the utilization of in silico, in vitro, and in vivo models for the assessment and prediction of toxicity associated with these nano-formulations. Furthermore, the chapter includes specific examples of in vitro and in vivo studies conducted on nanoparticles, illustrating their application in this field.

Novel self-assembled micelles of dual-modified dextrin with pH responsiveness via grafted octenyl succinic anhydride and cysteamine for curcumin delivery

In this study, a novel dextrin-based micelle (OSAD-SH), dual-modified with octenyl succinic anhydride (OSA) and cysteamine, was developed to address the acid instability issues of micelle modified only by OSA and designed for curcumin delivery. Three amphiphilic OSAD-SH polymers with different free sulfhydryl content were first synthesized. The study demonstrated that OSAD-SH micelles exhibited strong self-assembly properties, appearing as spheres with diameters ranging from 92.41 to 194.20 nm. Blank micelles showed good dilution resistance, as well as stability against acid, thermal, and ionic strength. The curcumin encapsulated by the micelles was in an amorphous state. In vitro release experiment demonstrated that curcumin released from OSAD-SH micelles exhibited pH responsiveness. The Ritger-Peppas model effectively predicted the release behavior of curcumin, which followed a super case-II transport. The OSAD-SH micelle will be a promising nanocarrier for improving the physicochemical properties of curcumin in food fields.

Synthesis of thiomer/nanoclay nanocomposites as a potential drug carrier: Evaluation of mucoadhesive and controlled release properties

Novel thiomer/nanoclay nanocomposites based on a thiomer and montmorillonite (MMT) were prepared in order to obtain a mucoadhesive material with controlled release properties for its potential use as drug carrier. The thiomer was synthesized by immobilization of L-cysteine in alginate mediated by carbodiimide reaction and further characterized by FT-IR and Ellman's reaction. Nanocomposites with growing concentrations of thiomer and MMT were prepared and analyzed by XRD, TGA and TEM. Rheological behavior of nanocomposite in contact with mucin and intestinal mucus were studied as in vitro and in situ mucoadhesion approach, showing until ∼10-fold increasing in the complex viscosity and ∼27-fold in elastic modulus when the amount of thiomer is increased. Higuchi and Korsmeyer-Peppas kinetic models were evaluated in order to study the release of deltamethrin from nanocomposite films. Release profiles showed a retard in the migration of the drug influenced by the amount of MMT (P < 0.05). Diffusion coefficient (D) showed a significant decrease (P < 0.0001) when concentration of MMT is increased reaching D = 4.18 × 10-7 m2 h-1, which resulted ∼7-fold lower in comparison with formulation without MMT. This hybrid nanocomposite can be projected as a potential mucoadhesive drug carrier with controlled release properties.

Mucoadhesive liposomal delivery system synergizing anti-inflammation and anti-oxidation for enhanced treatment against dry eye disease

Dry eye disease (DED) is a common and frequent ocular surface disease worldwide, which can cause severe ocular surface discomfort and blurred vision. Inflammation and reactive oxygen species (ROS) play decisive roles in the development of DED. However, existing treatments usually focus on anti-inflammation while ignore the role of ROS in DED. Ever worse, the clinical preparations are easily cleared by nasolacrimal ducts, resulting in poor therapeutic effect. To circumvent these obstacles, here we designed a phenylboronic acid (PBA) modified liposome co-loading immunosuppressant cyclosporin A (CsA) and antioxidant crocin (Cro). The CsA/Cro PBA Lip achieved mucoadhesion through the formation of covalent bonds between PBA and the sialic acid residues on mucin, and consequently improved the retention of drugs on the ocular surface. By inhibiting ROS production and blocking NF-κB inflammatory pathway, CsA/Cro PBA Lip successfully promoted the healing of damaged corneal epithelium, eventually achieving the goal of relieving DED. CsA/Cro PBA Lip is proven a simple yet effective dual-drug delivery system, exhibiting superior antioxidant and anti-inflammatory effects both in vitro and in vivo. This approach holds great potential in the clinical treatment of DED and other related mucosal inflammations.

Advanced dendritic glucan-derived biomaterials: From molecular structure to versatile applications

There is considerable interest in the development of advanced biomaterials with improved or novel functionality for diversified applications. Dendritic glucans, such as phytoglycogen and glycogen, are abundant biomaterials with highly branched three-dimensional globular architectures, which endow them with unique structural and functional attributes, including small size, large specific surface area, high water solubility, low viscosity, high water retention, and the availability of numerous modifiable surface groups. Dendritic glucans can be synthesized by in vivo biocatalysis reactions using glucosyl-1-phosphate as a substrate, which can be obtained from plant, animal, or microbial sources. They can also be synthesized by in vitro methods using sucrose or starch as a substrate, which may be more suitable for large-scale industrial production. The large numbers of hydroxyl groups on the surfaces of dendritic glucan provide a platform for diverse derivatizations, including nonreducing end, hydroxyl functionalization, molecular degradation, and conjugation modifications. Due to their unique physicochemical and functional attributes, dendritic glucans have been widely applied in the food, pharmaceutical, biomedical, cosmetic, and chemical industries. For instance, they have been used as delivery systems, adsorbents, tissue engineering scaffolds, biosensors, and bioelectronic components. This article reviews progress in the design, synthesis, and application of dendritic glucans over the past several decades.

Production of branched glucan polymer by a novel thermostable branching enzyme of Bifidobacterium thermophilum via one-pot biosynthesis containing a dual enzyme system

Glycogen-like particles (GLPs) are applied in food, pharmaceutical, and cosmetics. The large-scale production of GLPs is limited by their complicated multi-step enzymic processes. In this study, GLPs were produced in a one-pot dual-enzyme system using Bifidobacterium thermophilum branching enzyme (BtBE) and Neisseria polysaccharea amylosucrase (NpAS). BtBE showed excellent thermal stability (half-life of 1732.9 h at 50 °C). Substrate concentration was the most influential factor during GLPs production in this system: GLPs yield and [sucrose]_ini decreased from 42.4 % to 17.4 % and 0.3 to 1.0 M, respectively. Molecular weight and apparent density of GLPs decreased significantly with increasing [sucrose]_ini. Regardless of the [sucrose]_ini, the DP 6 of branch chain length was predominantly occupied. GLP digestibility increased with increasing [sucrose]_ini, indicating that the degree of GLP hydrolysis may be negatively related to its apparent density. This one-pot biosynthesis of GLPs using a dual-enzyme system could be useful for the development of industrial processes.

Applications and Advances of Multicellular Tumor Spheroids: Challenges in Their Development and Analysis

Biomedical research requires both in vitro and in vivo studies in order to explore disease processes or drug interactions. Foundational investigations have been performed at the cellular level using two-dimensional cultures as the gold-standard method since the early 20th century. However, three-dimensional (3D) cultures have emerged as a new tool for tissue modeling over the last few years, bridging the gap between in vitro and animal model studies. Cancer has been a worldwide challenge for the biomedical community due to its high morbidity and mortality rates. Various methods have been developed to produce multicellular tumor spheroids (MCTSs), including scaffold-free and scaffold-based structures, which usually depend on the demands of the cells used and the related biological question. MCTSs are increasingly utilized in studies involving cancer cell metabolism and cell cycle defects. These studies produce massive amounts of data, which demand elaborate and complex tools for thorough analysis. In this review, we discuss the advantages and disadvantages of several up-to-date methods used to construct MCTSs. In addition, we also present advanced methods for analyzing MCTS features. As MCTSs more closely mimic the in vivo tumor environment, compared to 2D monolayers, they can evolve to be an appealing model for in vitro tumor biology studies.

Development of Novel S-Protective Thiolated-Based Mucoadhesive Tablets for Repaglinide: Pharmacokinetic Study

Mucoadhesive polymers have an essential role in drug localization and target-specific actions in oral delivery systems. The current work aims to develop and characterize a new mucoadhesive polysaccharide polymer (thiolated xanthan gum-TXG and S-Protected thiolated xanthan gum-STX) that was further utilized for the preparation of repaglinide mucoadhesive tablets. The thiolation of xanthan gum was carried out by ester formation through the reaction of the hydroxyl group of xanthan gum and the carboxyl group of thioglycolic acid. Synthesis of TXG was optimized using central composite design, and TXG prepared using 5.303 moles/L of TGA and 6.075 g/L of xanthan gum can accomplish the prerequisites of the optimized formulation. Consequently, TXG was further combined with aromatic 2-mercapto-nicotinic acid to synthesize STX. TXG and STX were further studied for Fourier-transform infrared spectroscopy, rheological investigations, and Ellman’s assay (to quantify the number of thiol/disulfide groups). A substantial rise in the viscosity of STX might be due to increased interactions of macromolecules liable for improving the mucosal adhesion strength of thiolated gum. STX was proven safe with the support of cytotoxic study data. Mucoadhesive formulations of repaglinide-containing STX showed the highest ex vivo mucoadhesion strength (12.78 g-RSX-1 and 17.57 g- RSX-2) and residence time (>16 h). The improved cross-linkage and cohesive nature of the matrix in the thiolated and S-protected thiolated formulations was responsible for the controlled release of repaglinide over 16 h. The pharmacokinetic study revealed the greater AUC (area under the curve) and long half-life with the RSX-2 formulation, confirming that formulations based on S-protected thiomers can be favorable drug systems for enhancing the bioavailability of low-solubility drugs.

Targeting mucus barrier in respiratory diseases by chemically modified advanced delivery systems

Mucus gel constitutes of heavily cross-linked mucin fibers forming a viscoelastic, dense porous network that coats all the exposed epithelia not covered with the skin. The layer provides protection to the underlying gastrointestinal, respiratory, and female reproductive tracts, in addition to the organs such as the surface of eye by trapping the pathogens, irritants, environmental fine particles, and potentially hazardous foreign matter. However, this property of mucus gel poses a substantial challenge for realizing the localized and sustained drug delivery across the mucosal surfaces. The mucus permeating particles that spare the protective properties of mucus gel improve the therapeutic potency of the drugs aimed at the management of diseases, including sexually transmitted infections, lung cancer, irritable bowel disease, degenerative eye diseases and infections, and cystic fibrosis. As such, the mucoadhesive materials conjugated with drug molecules display a prolonged retention time in the mucosal gel that imparts a sustained release of the deliberated drug molecules across the mucosa. The contemporarily developed mucus penetrating materials for drug delivery applications comprise of a finer size, appreciable hydrophilicity, and a neutral surface to escape the entrapment within the cross-inked mucus fibers. Pertaining to the mucus secretion as a first line of defence in respiratory tract in response to the invading physical, chemical, and biological pathogens, the development of mucus penetrating materials hold promise as a stalwart approach for revolutionizing the respiratory drug delivery paradigm. The present review provides an epigrammatic collation of the mucus penetrating/mucoadhesive materials for achieving a controlled/sustained release of the cargo pharmaceutics and drug molecules across the respiratory mucus barrier.

Effect of Starch Primers on the Fine Structure of Enzymatically Synthesized Glycogen-like Glucan

Glycogen-like glucan (GnG) is a unique hyperbranched polysaccharide nanoparticle which is drawing increasing attention due to its biodegradability and abundant short branches that can be functionalized. Because starch and GnG are both composed of glucose residues and have similar glucosidic bonds, GnG could be fabricated by sucrose phosphorylase, α-glucan phosphorylase, and branching enzymes from starch primers and sucrose. In this study, high-amylose starch, normal starch, and waxy corn starch were used as primers to synthesize GnG, and their impact on the fine structure of GnG was investigated. Structural analysis indicated that with increasing content of amylopectin in the starch primer, the proportion of short chains in GnG decreased, and the degree of β-amylolysis and α-amylolysis was enhanced. Amylose in the primer contributed to a compact and homogeneous structure of GnG, while amylopectin triggered the formation of branch points with a more open distribution. These findings provide a new strategy for regulating the fine structure of GnG.

Augmentation of Antidiabetic Activity of Glibenclamide Microspheres Using S-Protected Okra Powered by QbD: Scintigraphy and In Vivo Studies

Successful drug delivery by mucoadhesive systems depends on the polymer type, which usually gets adherent on hydration. The intended polymers must sustain the association with biomembranes and preserve or accommodate the drug for an extended time. The majority of hydrophilic polymers tend to make weak interactions like noncovalent bonds, which hampers the positioning of dosage forms at the required target sites, leading to inefficient therapeutic outcomes. It is possible to overcome this by functionalizing the natural polymers with thiol moiety. Further, considering that S-protected thiomers can benefit by improving thiol stability at a broad range of pH and enhancing the residence period at the required target, 2-mercapto-nicotinic acid (MA) was utilized in this present study to shield the free thiol groups on thiolated okra (TO). S-protected TO (STO) was synthesized and characterized for various parameters. Glibenclamide-loaded microspheres were formulated using STO (G-STO-M), and the process was optimized. The optimized formulation has shown complete and controlled release of the loaded drug at the end of the dissolution study. Cell viability assay indicated that the thiolated S-protected polymers gelated very well, and the formulated microspheres were safe. Further, G-STO-M showed considerable in vivo mucoadhesion strength. The glucose tolerance test confirmed the efficacy of STO formulation in minimizing the plasma glucose level. These results favor S-protection as an encouraging tool for improving the absorption of poorly aqueous soluble drugs like glibenclamide.

Thiolated pectins: In vitro and ex vivo evaluation of three generations of thiomers

In recent decades, three generations of thiomers have been developed with the main purpose of obtaining enhanced interactions with mucosal tissues. Therefore, many different types of thiolated ligands have been generated and attached to polymeric backbones. The aim of this study was to synthesize all three generations of thiomers and to directly compare their properties regarding mucus penetration and mucoadhesion. Starting from pectin, the unprotected thiomer pectin-cysteine (Pec-Cys), the preactivated S-protected thiomer pectin-cysteine-mercaptonicotinic acid (Pec-Cys-MNA) and the less reactive S-protected thiomer pectin-cysteine-glutathione (Pec-Cys-GSH) were synthesized and characterised by FT-IR, NMR, and colorimetric studies. The polymers were evaluated regarding their cytotoxicity, swelling behaviour, viscosity after mixing with mucus, mucus diffusion, penetration into mucosa, and mucoadhesion. The amount of the three ligands (Cys, Cys-MNA and Cys-GSH) bound to the polymer was determined to be in the range of 193-196 µmol/g. All polymers showed no cytotoxicity. Viscosity of the mixture of Pec-Cys-MNA and Pec-Cys-GSH with mucus increased 21.5- and 26.7-fold, respectively, compared to the unmodified polymer within 3 hours. Swelling, mucoadhesion, interpenetration and mucus diffusion were increased in the following rank order: Pec-Cys < Pec-Cys-MNA < Pec-Cys-GSH. Results of mucoadhesion study indicated a 7.4 and 8.1-fold increase of Pec-Cys-MNA and Pec-Cys-GSH, respectively, compared to the unmodified polymer. As the less reactive S-protected thiomer exhibited higher mucoadhesive properties than the other thiomers, this study provides evidence for the superior mucoadhesion of 3^rd generation thiomers. STATEMENT OF SIGNIFICANCE: Three generations of thiolated polymers have been developed bearing different types of thiol ligands with the main purpose of enhancing mucus interactions. In this study, all generations were synthesized on the polymeric backbone of pectin for the first time to directly compare their mucus penetrating and mucoadhesive properties. 1^st generation exhibited covalently bound L-cysteine moieties. For 2^nd generation, thiols of cysteines were S-protected with 2-mercaptonicotinic acid (MNA), resulting in high reactive disulfide bonds. 3^rd generation was synthesized by a thiol/disulfide exchange of glutathione with MNA, producing a less reactive disulfide bond. Mucus penetrating and mucoadhesive properties were found to be increased as follows: 1^st generation < 2^nd generation < 3^rd generation. According to these results, the thiomer of 3^rd generation represents a promising excipient with strong mucoadhesion.

Development of purified glycogen derivatives as siRNA nanovectors

Purified Glycogen (PG) is a highly hyper branched carbohydrate, characterized by high water solubility and very moderate increase in viscosity. The dendrimeric structure of PG, appropriately functionalized, makes it an alternative to current synthetic gene delivery agents. The present study explores the preparation of purified glycogen polycationic derivatives (PGPDs), developed and characterized starting from a single step reaction between PG and N,N-dialkylamino alkyl halides. Subsequently PGPDs were used for the complexation of a model siRNA nucleic acid, a transfection reagent siRNA and a fluorescein-labelled dsRNA oligomer. PGPDs-siRNA complexes were fully characterized by agarose gel electrophoresis and their efficacy was assessed by both confocal microscopy and transfection assays on breast and renal cancer cells. Results proved that PGPDs-siRNA complexes were efficient and not cytotoxic, maintaining their spherical and dendrimeric structure and, particularly, were able to effectively transfect the target cells by releasing the siRNA.

In Vitro Investigation of Thiolated Chitosan Derivatives as Mucoadhesive Coating Materials for Solid Lipid Nanoparticles

In the present study, chitosan (CS) was thiolated by introducing l-cysteine via amide bond formation. Free thiol groups were protected with highly reactive 6-mercaptonicotinic acid (6-MNA) and less-reactive l-cysteine, respectively, via thiol/disulfide-exchange reactions. Unmodified CS, l-cysteine-modified thiolated CS (CS-Cys), 6-MNA-S-protected thiolated CS (CS-Cys-MNA), and l-cysteine-S-protected thiolated CS (CS-Cys-Cys) were applied as coating materials to solid lipid nanoparticles (SLN). The strength of mucus interaction followed the rank order plain < CS < CS-Cys-Cys < CS-Cys < CS-Cys-MNA, whereas mucus diffusion followed the rank order CS-Cys < CS-Cys-Cys < CS < CS-Cys-MNA < plain. In accordance with lower reactivity, CS-Cys-Cys-coated SLN were immobilized to a lower extent than CS-Cys-coated SLN, while CS-Cys-MNA-coated SLN dissociated from their coating material resulting in a similar diffusion behavior as plain SLN. Consequently, CS-Cys-Cys-coated SLN and CS-Cys-MNA-coated SLN showed the highest retention on porcine intestinal mucosa by enabling a synergism of efficient mucus diffusion and strong mucoadhesion.

Polyphenols Epigallocatechin Gallate and Resveratrol, and Polyphenol-Functionalized Nanoparticles Prevent Enterovirus Infection through Clustering and Stabilization of the Viruses

To efficiently lower virus infectivity and combat virus epidemics or pandemics, it is important to discover broadly acting antivirals. Here, we investigated two naturally occurring polyphenols, Epigallocatechin gallate (EGCG) and Resveratrol (RES), and polyphenol-functionalized nanoparticles for their antiviral efficacy. Concentrations in the low micromolar range permanently inhibited the infectivity of high doses of enteroviruses (10⁷ PFU/mL). Sucrose gradient separation of radiolabeled viruses, dynamic light scattering, transmission electron microscopic imaging and an in-house developed real-time fluorescence assay revealed that polyphenols prevented infection mainly through clustering of the virions into very stable assemblies. Clustering and stabilization were not compromised even in dilute virus solutions or after diluting the polyphenols-clustered virions by 50-fold. In addition, the polyphenols lowered virus binding on cells. In silico docking experiments of these molecules against 2- and 3-fold symmetry axes of the capsid, using an algorithm developed for this study, discovered five binding sites for polyphenols, out of which three were novel binding sites. Our results altogether suggest that polyphenols exert their antiviral effect through binding to multiple sites on the virion surface, leading to aggregation of the virions and preventing RNA release and reducing cell surface binding.

Thiol- and Disulfide-Based Stimulus-Responsive Soft Materials and Self-Assembling Systems

Properties and applications of synthetic thiol- and disulfide-based materials, principally polymers, are reviewed. Emphasis is placed on soft and self-assembling materials in which interconversion of the thiol and disulfide groups initiates stimulus-responses and/or self-healing for biomedical and non-biomedical applications.

Spray-dried mucoadhesive microparticles based on S-protected thiolated hydroxypropyl-β-cyclodextrin for budesonide nasal delivery

Budesonide (BUD) is used as first choice therapy for the treatment of allergic rhinitis, a chronic allergic-immune condition with an increased incidence in the pediatric population. The main problem of BUD nasal formulations is related to its poor aqueous solubility (S₀ = 5.03·10^-5 M), sometimes compensated by the administration of high doses of the drug. The ability of thiolated hydroxypropyl-β-cyclodextrin (HP- β -CD-SH, 100 mM) to increase the water solubility of BUD (S_HP- β_-CD-SH = 10.9·10^-3 M) more than pristine hydroxypropyl- β -cyclodextrin (HP- β-CD, S_HP- β-_CD = 4.3·10^-3 M) has been previously demonstrated. Considering that S-protected thiomers have the advantage of increasing the stability of thiols over a wide pH range prolonging their residence time at the target site, 2-mercapto-nicotinic acid (MNA) was used in this study to protect the free thiol groups on HP- β -CD-SH generating the corresponding S-protected cyclodextrin (HP-β-CD-MNA). Besides, given the increased stability and processability of HP-β-CD-MNA, mucoadhesive microparticles (MPs) were prepared via spray-drying of aqueous solutions of the inclusion complex HP-β-CD-MNA/BUD. MPs were morphologically and dimensionally homogeneous exhibiting an average diameter of 3.24 ± 0.57 µm. Over time these MPs formed larger aggregates with an average diameter of 10-50 μm, suitable for the design of intranasal delivery systems. Differential scanning calorimetry analyses revealed the absence of crystalline BUD from spray-dried complexes. Dissolution studies shown that spray-dried MPs dissolved quickly and the complexed drug was completely solubilized within the first 20 min of the dissolution process. Cell viability assay indicated that spray-dried complexes are safe. In vitro mucoadhesion studies on freshly excised porcine nasal mucosa showed a 1.4- and 2.3-fold prolonged mucosal residence time of HP- β -CD-SH/BUD and HP-β-CD-MNA/BUD in comparison to the unmodified cyclodextrin (CD), respectively. Rheological behaviour of spray-dried MPs complexes/mucus mixtures confirmed the results of the mucoadhesion studies, as the dynamic viscosity of the spray-dried inclusion complexes HP-β-CD-SH/BUD and HP-β-CD-MNA/BUD was 1.1-fold and 2.4 fold increased in comparison to the unmodified HP-β-CD/BUD complex. According to these results, MPs comprising HP- β -CD-MNA/BUD might be a promising tool for nasal delivery of poorly water-soluble corticosteroids such as BUD.

Paediatric Formulation: Design and Development

The development of medicines designed for children can be challenging since this distinct patient population requires specific needs. A formulation designed for paediatric patients must consider the following aspects: patient population variability; dose flexibility; route of administration; patient compliance; drug and excipient tolerability. The purpose of this Special Issue entitled "Paediatric Formulation: Design and Development" is to provide an update on both state-of-the-art methodology and operational challenges in the design and development of paediatric formulations. It aims at re-evaluating what is needed for more progress in the design and development of age-appropriate treatments for paediatric diseases, focusing on: formulation development; drug delivery design; efficacy, safety, and tolerability of drugs and excipients. This editorial, briefly, summarizes the objects of nine original research and review papers published in this Special Issue.

Preactivated-thiolated polyacrylic acid/1-vinyl pyrrolidone nanoparticles as nicotine carriers for smoking cessation

This study aimed to develop nicotine-loaded mucoadhesive preactivated-thiolated polymeric nanoparticles (PNPs) for smoking cessation. 2-Mercaptonicotinic acid (2MNA) was coupled as dithionicotinic acid dimer and used in the preactivation of thiolated polyacrylic acid/vinyl pyrrolidone PNPs (thiolated AA/VP PNPs). Preactivated-thiolated AA/VP PNPs were synthesized through surfactant-free emulsion polymerization and coupling reactions. The structural attributes of the preactivated-thiolated AA/VP PNPs were characterized using Fourier-transform infrared spectroscopy and proton nuclear magnetic resonance spectroscopy. The particle size and zeta potential were evaluated by dynamic light scattering evaluation. The morphology of the preactivated-thiolated AA/VP PNPs was examined using scanning electron microscopy. In addition, the mucoadhesive properties, drug loading and release, and biocompatibility of the preactivated-thiolated AA/VP PNPs were assessed. The spherical preactivated-thiolated AA/VP PNPs were successfully synthesized with a particle size of 410.3 ± 7.4 nm and a negative surface charge. The preactivated-thiolated AA/VP PNPs exhibited superior mucoadhesive properties compared with the thiolated AA/VP PNPs. Drug loading by PNP to a nicotine ratio of 1 : 1 provided desirable loading capacity and % loading efficiency of 285.7 ± 36.7 μg mg⁻¹ and 57.1 ± 7.4%, respectively. More than 50% of the nicotine contained in the PNPs was rapidly released in the first hour, followed by a sustained release for up to 12 h. Moreover, the synthesized PNPs were non-toxic to human gingival cells. Therefore, the preactivated-thiolated AA/VP PNPs may be a candidate carrier of nicotine for smoking cessation.

Preactivated-thiolated AA/VP NPs improved mucoadhesive property and prolonged nicotine release to 12 h.

Glycogen as a Building Block for Advanced Biological Materials

Biological nanoparticles found in living systems possess distinct molecular architectures and diverse functions. Glycogen is a unique biological polysaccharide nanoparticle fabricated by nature through a bottom-up approach. The biocatalytic synthesis of glycogen has evolved over time to form a nanometer-sized dendrimer-like structure (20-150 nm) with a highly branched surface and a dense core. This makes glycogen markedly different from other natural linear or branched polysaccharides and particularly attractive as a platform for biomedical applications. Glycogen is inherently biodegradable, nontoxic, and can be functionalized with diverse surface and internal motifs for enhanced biofunctional properties. Recently, there has been growing interest in glycogen as a natural alternative to synthetic polymers and nanoparticles in a range of applications. Herein, the recent literature on glycogen in the material-based sciences, including its use as a constituent in biodegradable hydrogels and fibers, drug delivery vectors, tumor targeting and penetrating nanoparticles, immunomodulators, vaccine adjuvants, and contrast agents, is reviewed. The various methods of chemical functionalization and physical assembly of glycogen nanoparticles into multicomponent nanodevices, which advance glycogen toward a functional therapeutic nanoparticle from nature and back again, are discussed in detail.

Per-6-Thiolated Cyclodextrins: A Novel Type of Permeation Enhancing Excipients for BCS Class IV Drugs

The purpose of the study was to develop a per-6-thiolated α-cyclodextrin (α-CD) by substituting all primary hydroxyl groups of α-CD with thiol groups and to assess its solubility-improving and permeation-enhancing properties for a BCS Class IV drug in vitro as well as in vivo. The primary hydroxyl groups of α-CD were replaced by iodine, followed by substitution with -SH groups. The structure of per-6-thiolated α-CD was approved by FT-IR and ¹H NMR spectroscopy. The per-6-thiolated was characterized for thiol content, -SH stability, cytotoxicity, and solubility-improving properties by using the model BCS Class IV drug furosemide (FUR). The mucoadhesive properties of the thiolated oligomer were investigated via viscoelastic measurements with porcine mucus, whereas permeation-enhancing features were evaluated on the Caco-2 cell monolayer and rat gut mucosa. Furthermore, oral bioavailability studies were performed in rats. The per-6-thiolated α-CD oligomer displayed 4244 ± 402 μmol/g thiol groups. These -SH groups were stable at pH ≤ 4, exhibiting a pK_a value of 8.1, but subject to oxidation at higher pH. Per-6-thiolated α-CD was not cytotoxic to Caco-2 cells in 0.5% (m/v) concentration within 24 h. It improved the solubility of FUR in the same manner as unmodified α-CD. The addition of per-6-thiolated α-CD (0.5% m/v) increased the mucus viscosity up to 5.8-fold at 37 °C within 4 h. Because of the incorporation in per-6-thiolated α-CD, the apparent permeability coefficient (P_app) of FUR was 6.87-fold improved on the Caco-2 cell monolayer and 6.55-fold on the intestinal mucosa. Moreover, in vivo studies showed a 4.9-fold improved oral bioavailability of FUR due to the incorporation in per-6-thiolated α-CD. These results indicate that per-6-thiolated α-CD would be a promising auxiliary agent for the mucosal delivery of, in particular, BCS Class IV drugs.

Mucoadhesive-to-penetrating controllable peptosomes-in-microspheres co-loaded with anti-miR-31 oligonucleotide and Curcumin for targeted colorectal cancer therapy

Background: Accumulating evidences indicate that nanomedicines greatly decrease the side effects and enhance the efficacy of colorectal cancer (CRC) treatment. In particular, the use of rectal delivery of nanomedicines, with advantages such as fast therapeutic effects and a diminishing hepatic first-pass effect, is currently emerging. Method: We established a CRC targeted delivery system, in which α-lactalbumin peptosomes (PSs) co-loaded with a microRNA (miR)-31 inhibitor (miR-31i) and curcumin (Cur) were encapsuslated in thiolated TEMPO oxidized Konjac glucomannan (sOKGM) microspheres, referred as sOKGM-PS-miR-31i/Cur. The CRC targeting capability, drug release profiles, mucoadhesive-to-penetrating properties and therapeutic efficacy of sOKGM-PS-miR-31i/Cur delivery system were evaluated in colorectal cancer cells and azoxymethane-dextran sodium (AOM-DSS) induced tumor models. Results: sOKGM-PS-miR-31i/Cur delivery system were stable in the harsh gastrointestinal environment after rectal or oral administration; and were also mucoadhesive due to disulfide bond interactions with the colonic mucus layer, resulting in an enhanced drug retention and local bioavailability in the colon. Concomitantly, the released PS-miR-31i/Cur PSs from the microsphere was mucus-penetrating, efficiently passing through the colonic mucus layer, and allowed Cur and miR-31i specifically target to colon tumor cells with the guide of CD133 targeting peptides. Consequently, rectal delivery of sOKGM-PS-miR-31i/Cur microspheres suppressed tumor growth in an azoxymethane-dextran sodium sulfate (AOM-DSS)-induced tumor model. Conclusion: sOKGM-PS-miR-31i/Cur microspheres are effective rectal delivery system with combined advantages of mucoadhesive and mucus-penetrating properties, representing a potent and viable therapeutic approach for CRC.

Nanoengineering multifunctional hybrid interfaces using adhesive glycogen nanoparticles

Amphiphilic phytoglycogen nanoparticles are used as building blocks for engineering multifunctional hybrid films with catalytic and sensing properties.

Thiolated polymers: Bioinspired polymers utilizing one of the most important bridging structures in nature

Thiolated polymers designated "thiomers" are obtained by covalent attachment of thiol functionalities on the polymeric backbone of polymers. In 1998 these polymers were first described as mucoadhesive and in situ gelling compounds forming disulfide bonds with cysteine-rich substructures of mucus glycoproteins and crosslinking through inter- and intrachain disulfide bond formation. In the following, it was shown that thiomers are able to form disulfides with keratins and membrane-associated proteins exhibiting also cysteine-rich substructures. Furthermore, permeation enhancing, enzyme inhibiting and efflux pump inhibiting properties were demonstrated. Because of these capabilities thiomers are promising tools for drug delivery guaranteeing a strongly prolonged residence time as well as sustained release on mucosal membranes. Apart from that, thiomers are used as drugs per se. In particular, for treatment of dry eye syndrome various thiolated polymers are in development and a first product has already reached the market. Within this review an overview about the thiomer-technology and its potential for different applications is provided discussing especially the outcome of studies in non-rodent animal models and that of numerous clinical trials. Moreover, an overview on product developments is given.

Carbohydrate-based nanomaterials for biomedical applications

Carbohydrates are abundant biomolecules, with a strong tendency to form supramolecular networks. A host of carbohydrate-based nanomaterials have been exploited for biomedical applications. These structures are based on simple mono- or disaccharides, as well as on complex, polymeric systems. Chemical modifications serve to tune the shapes and properties of these materials. In particular, carbohydrate-based nanoparticles and nanogels were used for drug delivery, imaging, and tissue engineering applications. Due to the reversible nature of the assembly, often based on a combination of hydrogen bonding and hydrophobic interactions, carbohydrate-based materials are valuable substrates for the creations of responsive systems. Herein, we review the current research on carbohydrate-based nanomaterials, with a particular focus on carbohydrate assembly. We will discuss how these systems are formed and how their properties are tuned. Particular emphasis will be placed on the use of carbohydrates for biomedical applications. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.

S-preactivated thiolated glycol chitosan useful to combine mucoadhesion and drug delivery

This work describes S-preactivated N-acetylcysteine (NAC)- and glutathione (GSH)-glycol chitosan (GC) polymer conjugates engineered as potential mucoadhesive platform. Preactivated thiomers (GC-NAC-MNA, GC-GSH-MNA) were synthesized by bond formation between GC-NAC or GC-GSH and 2-mercaptonicotinic acid (MNA) used as ligand. The presence of protected thiol moieties on this new class of thiolated GC made them not subject to oxidation. The structural modifications of the resulting derivatives were confirmed by proton Nuclear Magnetic Resonance (¹H NMR) and Size Exclusion Chromatography (SEC). The conjugates displayed 91.2% and 90.1% of S-preactivation for GC-NAC-MNA and GC-GSH-MNA, respectively. The polymers were tested in ex-vivo and in vitro for their mucoadhesive properties and toxicity. The results showed that the preactivation of GC-NAC and GC-GSH increased their mucoadhesive abilities compared to their thiolated precursors by 1.4-, 4.4-fold in time of adhesion evaluated using rotating cylinder method, 1.6-, 1.5-fold in total work of adhesion (TWA) and 2.0-, 1.3-fold in maximum detachment force (MDA) determined using tensile studies, respectively. Moreover, water-uptake studies showed an improved in weight indicating water-uptake strongly dependent on derivations, before erosion occurred, whereas disintegration took place for the thiolated polymers within the first hour. The S-preactivated modification did not affect the cell viability of Caco2 cells exposed to the polymers. The release of the model drug sodium naproxen from tablets prepared with a lyophilized mixture of drug and polymer was studied via dissolution apparatus revealing that the preactivation on GC-GSH and GC-NAC involves a slowdown in the drug release rate. The results shown that the novel preactivated thiolated GC-derivatives can be considered promising excipients for the development of mucoadhesive drug delivery systems.

A review of natural polysaccharides for drug delivery applications: Special focus on cellulose, starch and glycogen

Natural polysaccharides are renewable with a high degree of biocompatibility, biodegradability, and ability to mimic the natural extracellular matrix (ECM) microenvironment. Comprehensive investigations of polysaccharides are essential for our fundamental understanding of exploiting its potential as bio-composite, nano-conjugate and in pharmaceutical sectors. Polysaccharides are considered to be superior to other polymers, for its ease in tailoring, bio-compatibility, bio-activity, homogeneity and bio-adhesive properties. The main focus of this review is to spotlight the new advancements and challenges concerned with surface modification, binding domains, biological interaction with the conjugate including stability, polydispersity, and biodegradability. In this review, we have limited our survey to three essential polysaccharides including cellulose, starch, and glycogen that are sourced from plants, microbes, and animals respectively are reviewed. We also present the polysaccharides which have been extensively modified with the various types of conjugates for combating last-ditch pharmaceutical challenges.

S-protected thiolated cyclodextrins as mucoadhesive oligomers for drug delivery

AIM

The purpose of this study was to develop a novel mucoadhesive thiolated and S-protected gamma cyclodextrin (γ-CD) with an intact ring backbone to assure a prolonged residence time at specific target sites.

METHOD

Thiolated γ-CD was generated through bromine substitution of its hydroxyl groups followed by replacement to thiol groups using thiourea. In the second step, thiol groups were protected by disulfide bond formation with 2-mercaptonicotinic acid (2-MNA).

RESULT

Thiolated γ-CD displayed 1385 ± 84 µmol thiol groups per gram of oligomer and the amount of MNA determined in the S-protected oligomer was 1153 ± 41 µmol per gram of oligomer. In-vitro screening of mucoadhesive properties of thiolated and S-protected γ-CD was done by two methods. Rheological investigation revealed the conjugates non-mucolytic with only a slight increase in viscosity of thiolated and S-protected γ-CD as compared to unmodified γ-CD, whereas mucoadhesive properties of the new thiolated and S-protected γ-CD performed on freshly excised porcine intestinal mucosa showed 44.4- and 50.9-fold improvement in mucoadhesion, respectively. The new conjugates did not show any cytotoxicity to Caco-2 cells even at a concentration of 1% (m/v) for 24 h. In addition, in-vitro studies of α-amylase degradation of γ-CD, γ-CD-SH and γ-CD-SS-MNA confirmed that all conjugates are biodegradable.

CONCLUSION

These outcomes predict that these new conjugates of γ-CD might provide a new favorable tool for drug delivery providing a prolonged residence time on mucosal surfaces.

Delivery of Proapoptotic Agents in Glioma Cell Lines by TSPO Ligand-Dextran Nanogels

Translocator protein 18-kDa (TSPO) is a versatile mitochondrial target for molecular imaging and therapy. Moreover, selective TSPO ligands have been widely investigated for diagnostic purposes and explored to target drug delivery systems directed to cancer cells overexpressing TSPO. Indeed, poly(d,l-lactic-co-glycolic acid (PLGA) polymers and nanocarriers decorated with TSPO ligands are capable of transporting TSPO ligands inside cancer cells, inducing survival inhibition in cancer cells and producing mitochondrial morphology modification. The aim of this work was to prepare nanogels (NGs) made with TSPO ligand dextran conjugates (TSPO-Dex) that are useful as potential delivery systems of two TSPO ligands as apoptotic agents. Synthesis and complete characterization of TSPO–dextran conjugates, an average molecular weights analysis, TSPO ligand release profiles, thermal behaviour and swelling studies were achieved. NG preparation, characterization and in vitro biological studies were also performed. The release of TSPO ligands released from dextran conjugates at 37 °C occurred in human serum at a faster rate than that detected in phosphate buffer. Cytotoxicity studies demonstrated that NGs produced from TSPO ligand–dextran conjugates induce survival inhibition in rat C6 glioma cell lines. Cellular uptake was also proven by fluorescence microscopy.

Nanoformulations for Drug Delivery: Safety, Toxicity, and Efficacy

This chapter presents an outline of the recent available information regarding safety, toxicity, and efficacy of nano drug delivery systems. Of particular importance is the evaluation of several key factors to design nontoxic and effective nanoformulations. Among them, we focus on nanostructure materials and synthesis methods, mechanisms of interactions with biological systems, treatment of nanoparticles, manufacture impurities, and nanostability. Emphasis is given to in silico, in vitro, and in vivo models used to assess and predict the toxicity of these new formulations. Additionally, some examples of in vitro and in vivo studies of specific nanoderivatives are also presented in this chapter.