Development of PLGA nanoparticles loaded with clofazimine for oral delivery: Assessment of formulation variables and intestinal permeability

Highly increasing solubility of clofazimine, an extremely water-insoluble basic drug, in lipid-based SEDDS using digestion products of long-chain lipids

Clofazimine (CFZ) is a highly effective antibiotic against leprosy and drug-resistant tuberculosis and is on the WHO List of Essential Drugs. However, no CFZ product with optimal bioavailability is available worldwide. The manufacturer withdrew its only marketed product, presumably due to poor and erratic bioavailability because of extremely low aqueous solubility in the gastrointestinal pH range. We developed a self-emulsifying drug delivery system (SEDDS) using a lipid digestion product (LDP) containing glyceryl monooleate and oleic acid at ∼1:2 molar ratio to increase drug solubility and ensure rapid dispersion into microemulsion. While solubilities of CFZ in glyceryl monooleate, glyceryl trioleate, and two common surfactants (Tween 80 and Kolliphor EL) were comparatively low (<15 mg/g), oleic acid provided a very high solubility of ∼500 mg/g. Because of the presence of oleic acid, the clofazimine solubility in SEDDS containing a 50:50 w/w mixture of LDP and surfactants increased to 130 mg/g. Two formulations having 50 or 100 mg CFZ in one gram of SEDDS were developed. They dispersed rapidly and almost completely in simulated intestinal fluid and in the USP pH 6.8 phosphate buffer containing 3 mM sodium taurocholate. There was some precipitation of CFZ as the HCl salt at low gastric pH during dispersion testing, but the effect could be avoided using enteric-coated capsules. Thus, an enteric-coated lipid-based formulation for CFZ with as high as 100 mg/g drug loading was developed, providing complete drug release and producing microemulsions under intestinal pH conditions.

Transepithelial transport of nanoparticles in oral drug delivery: From the perspective of surface and holistic property modulation

Despite the promising prospects of nanoparticles in oral drug delivery, the process of oral administration involves a complex transportation pathway that includes cellular uptake, intracellular trafficking, and exocytosis by intestinal epithelial cells, which are necessary steps for nanoparticles to enter the bloodstream and exert therapeutic effects. Current researchers have identified several crucial factors that regulate the interaction between nanoparticles and intestinal epithelial cells, including surface properties such as ligand modification, surface charge, hydrophilicity/hydrophobicity, intestinal protein corona formation, as well as holistic properties like particle size, shape, and rigidity. Understanding these properties is essential for enhancing transepithelial transport efficiency and designing effective oral drug delivery systems. Therefore, this review provides a comprehensive overview of the surface and holistic properties that influence the transepithelial transport of nanoparticles, elucidating the underlying principles governing their impact on transepithelial transport. The review also outlines the chosen of parameters to be considered for the subsequent design of oral drug delivery systems.

Leprosy: Comprehensive insights into pathology, immunology, and cutting-edge treatment strategies, integrating nanoparticles and ethnomedicinal plants

Mycobacterium leprae is the causative agent responsible for the chronic disease known as leprosy. This condition is characterized by dermal involvement, often leading to peripheral nerve damage, sensory-motor loss, and related abnormalities. Both innate and acquired immunological responses play a role in the disease, and even in individuals with lepromatous leprosy, there can be a transient increase in T cell immunity during lepromatous reactions. Diagnosing of early-stage leprosy poses significant challenges. In this context, nanoparticles have emerged as a promising avenue for addressing various crucial issues related to leprosy. These include combatting drug resistance, mitigating adverse effects of conventional medications, and enhancing targeted drug delivery. This review serves as a comprehensive compilation, encompassing aspects of pathology, immunology, and adverse effects of multidrug delivery systems in the context of leprosy treatment. Furthermore, the review underscores the significance of ethnomedicinal plants, bioactive secondary metabolites, and nanotherapeutics in the management of leprosy. It emphasizes the potential to bridge the gap between existing literature and ongoing research efforts, with a profound scope for validating traditional claims, developing herbal medicines, and formulating nanoscale drug delivery systems that are safe, effective, and widely accepted.

Liver-Targeting Composite Nanocarrier Delivery System Based on Chitosan Nanoparticles and Phospholipid Complexes

Liver fibrosis is mainly caused by excessive accumulation of extracellular matrix and structural changes in the liver, ultimately leading to cirrhosis if left untreated. Reducing hyaluronan synthesis by inhibiting hyaluronic acid deposition or regulating the expression of hyaluronic synthase can ameliorate liver fibrosis symptoms. In this study, we aimed to improve the bioavailability and liver-targeting capacity of hydroxymethyl coumarin (4-MU) using a newly developed phospholipid complex chitosan nanoparticle (4-MU PC/CNP) optimized using the Box-Behnken design. The composite nanocarrier delivery system was formulated using solvent evaporation technology, and formulation and process parameters were evaluated. Furthermore, 4-MU PC/CNPs and their pharmacokinetics were characterized. The established 4-MU PC/CNPs had an average particle size of 153.07 ± 0.29 nm, a polydispersity index value of 0.383, and a positive zeta potential of ∼35.4 mV. Compared with 4-MUs, 4-MU PC/CNPs exhibited significantly improved water solubility, faster plasma clearance and tissue distribution, and better liver targeting. Pharmacokinetic analysis showed that the oral bioavailability of 4-MU in 4-MU PC/CNPs was significantly higher than that of simple 4-MU. In conclusion, 4-MU PC improved drug lipid (oil-water distribution coefficient of 1.31 ± 0.03) and water solubilities (2.05 times the drug substance). 4-MU PC/CNPs significantly improved 4-MU oral bioavailability, representing a promising approach for enhancing drug solubility. This study demonstrates that the targeting parameters of 4-MU PC/CNPs in the liver were all greater than 1, indicating that they specifically targeted the liver, thereby potentially alleviating liver fibrosis.

Cryo-XPS for Surface Characterization of Nanomedicines

Nanoparticles used for medical applications commonly possess coatings or surface functionalities intended to provide specific behavior in vivo, for example, the use of PEG to provide stealth properties. Direct, quantitative measurement of the surface chemistry and composition of such systems in a hydrated environment has thus far not been demonstrated, yet such measurements are of great importance for the development of nanomedicine systems. Here we demonstrate the first use of cryo-XPS for the measurement of two PEG-functionalized nanomedicines: a polymeric drug delivery system and a lipid nanoparticle mRNA carrier. The observed differences between cryo-XPS and standard XPS measurements indicate the potential of cryo-XPS for providing quantitative measurements of such nanoparticle systems in hydrated conditions.

In vitro and in vivo evaluation of dual Clofazimine and Verapamil loaded PLGA nanoparticles

Combination therapy may counter the risk caused by efflux pumps mediated resistance developed by mycobacteria with a concomitant increase of the bactericidal effect of anti-TB drugs. In the present study, combination of two drugs in a nanoformulation was prepared. Clofazimine targets type 2 NADH dehydrogenase of the electron transport chain, and Verapamil inhibits various mycobacterial efflux pumps. The nanotechnology approach was adopted to overcome limitations associated with administration of free form of drugs by using poly (D, L-lactic-co-glycolic acid) as a polymer. Nanoparticles were prepared by oil/water single emulsion solvent evaporation procedure and characterized by various techniques. The results thus highlighted that developed nanoparticles were spherical with nano range size (200-450 nm). Fourier transform infrared spectroscopy revealed successful encapsulation of drugs in developed nanoformulations. Drugs in combination showed higher encapsulation efficiency and percentage drug loading capacity as compared to individual drug nanoformulations. Also, reduced toxicity of nanoformulation was observed in hemolysis assay as compared to free drugs. Ex-vivo analysis demonstrated efficient uptake of rhodamine encapsulated nanoparticles by THP-1 cells, while in-vivo results revealed sustained drug release of nanoformulation as compared to free drugs in combination. Therefore, we were able to achieve development of a single nanoformulation encapsulating Clofazimine and Verapamil in combination. Based on these findings, future studies can be designed to explore the potential of co-encapsulated Clofazimine and Verapamil nanoparticles in management of tuberculosis.

Supplementary Information

The online version contains supplementary material available at 10.1007/s12291-022-01062-8.

Combining orthogonal measurements to unveil diclofenac encapsulation into polymeric and lipid nanocarriers

The quantification of the drug associated to nanoparticle carriers, often expressed in terms of encapsulation efficiency, is a regulatory requirement. The establishment of independent methods to evaluate this parameter provides a means for measurement validation, which is critical in providing confidence in the methods and enabling the robust characterization of nanomedicines. Chromatography is traditionally used to measure drug encapsulation into nanoparticles. Here, we describe an additional independent strategy based on analytical centrifugation. The encapsulation of diclofenac into nanocarriers was quantified based on the mass difference between placebo (i.e. unloaded) and loaded nanoparticles. This difference was estimated using particle densities measured by differential centrifugal sedimentation (DCS) and size and concentration values measured by particle tracking analysis (PTA). The proposed strategy was applied to two types of formulations, namely poly(lactic-co-glycolic acid) (PLGA) nanoparticles and nanostructured lipid carriers, which were analysed by DCS operated in sedimentation and flotation modes, respectively. The results were compared to those from high performance liquid chromatography (HPLC) measurements. Additionally, X-ray photoelectron spectroscopy analysis was used to elucidate the surface chemical composition of the placebo and loaded nanoparticles. The proposed approach enables the monitoring of batch-to-batch consistency and the quantification of diclofenac association to PLGA nanoparticles from 0.7 ng to 5 ng of drug per 1 μg of PLGA, with good linear correlation between DCS and HPLC results (R² = 0.975). Using the same approach, similar quantification in lipid nanocarriers was possible for a loading of diclofenac ≥1.1 ng per 1 μg of lipids, with results in agreement with the HPLC method (R² = 0.971). Hence, the strategy proposed here expands the analytical tools available for evaluating nanoparticles encapsulation efficiency, being thus significant for increasing the robustness of drug-delivery nanocarriers characterization.

Improvement and characterization of oral absorption behavior of clofazimine by SNEDDS: Quantitative evaluation of extensive lymphatic transport

Clofazimine, an anti-leprosy drug, has been anticipated for a candidate to treat tuberculosis, cryptosporidiosis, and coronavirus infection, but its low oral bioavailability is considered a reason for its limited activity. In the current study, we have tried to improve the oral bioavailability of clofazimine by several SNEDDS formulations and characterized the absorption behavior from various aspects. Among four SNEDDS formulations prepared, SNEDDS A, prepared with castor oil as an oil component, provided the highest bioavailability (around 61%) and SNEDDS D, prepared with Capryol 90, gave the second highest bioavailability. SNEDDS A formed the finest nanoparticles, which were maintained under gastric and intestinal luminal conditions. The comparison in oral bioavailability between the SNEDDS formulation and its corresponding preformed nanoemulsion suggested that SNEDDS A would efficiently form nanoemulsion in the gastrointestinal tract after oral administration. AUC of mesenteric lymph node concentration was the highest for SNEDDS A, which would be one of the reasons for SNEDDS A to reveal the highest oral bioavailability. A cycloheximide-treated oral absorption study and single-pass perfusion study by utilizing a vascular-luminal perfused small intestine-liver preparation clearly indicated that over 90% of clofazimine absorbed to systemic circulation should be derived from lymphatic transport for both SNEDDS A and D. Furthermore, the fraction of dose absorbed was around 65% for SNEDDS D, but SNEDDS A achieved around 94%, indicating the excellent performance of SNEDDS A.

pH-responsive phthalate cashew gum nanoparticles for improving drugs delivery and anti-Trypanosoma cruzi efficacy

Nanotechnology is a crucial technology in recent years has resulted in new and creative applications of nanomedicine. Polymeric nanoparticles have increasing demands in pharmaceutical applications and require high reproducibility, homogeneity, and control over their properties. Work explores the use of cashew phthalate gum (PCG) as a particle-forming polymer. PCG exhibited a pH-sensitive behavior due to the of acid groups on its chains, and control drug release. We report the development of nanoparticles carrying benznidazole. Formulations were characterized by DLS, encapsulation efficiency, drug loading, FTIR, pH-responsive behavior, release, and in vitro kinetics. Interaction between polymer and drug was an evaluated by molecular dynamics. Morphology was observed by SEM, and in vitro cytotoxicity by MTT assay. Trypanocidal effect for epimastigote and trypomastigote forms was also evaluated. NPs responded to the slightly basic pH, triggering the release of BNZ. In acidic medium, they presented small size, spherical shape, and good stability. It was indicated NP with enhanced biological activity, reduced cytotoxicity, high anti T. cruzi performance, and pH-sensitive release. This work investigated properties related to the development and enhancement of nanoparticles. PCG has specific physicochemical properties that make it a promising alternative to drug delivery, however, there are still challenges to be overcome.

Impact of nanoparticles on amyloid β-induced Alzheimer's disease, tuberculosis, leprosy and cancer: a systematic review

Nanotechnology is an interdisciplinary domain of science, technology and engineering that deals with nano-sized materials/particles. Usually, the size of nanoparticles lies between 1 and 100 nm. Due to their small size and large surface area-to-volume ratio, nanoparticles exhibit high reactivity, greater stability and adsorption capacity. These important physicochemical properties attract scientific community to utilize them in biomedical field. Various types of nanoparticles (inorganic and organic) have broad applications in medical field ranging from imaging to gene therapy. These are also effective drug carriers. In recent times, nanoparticles are utilized to circumvent different treatment limitations. For example, the ability of nanoparticles to cross the blood-brain barrier and having a certain degree of specificity towards amyloid deposits makes themselves important candidates for the treatment of Alzheimer's disease. Furthermore, nanotechnology has been used extensively to overcome several pertinent issues like drug-resistance phenomenon, side effects of conventional drugs and targeted drug delivery issue in leprosy, tuberculosis and cancer. Thus, in this review, the application of different nanoparticles for the treatment of these four important diseases (Alzheimer's disease, tuberculosis, leprosy and cancer) as well as for the effective delivery of drugs used in these diseases has been presented systematically. Although nanoformulations have many advantages over traditional therapeutics for treating these diseases, nanotoxicity is a major concern that has been discussed subsequently. Lastly, we have presented the promising future prospective of nanoparticles as alternative therapeutics. In that section, we have discussed about the futuristic approach(es) that could provide promising candidate(s) for the treatment of these four diseases.

Development and Optimization of Hybrid Polymeric Nanoparticles of Apigenin: Physicochemical Characterization, Antioxidant Activity and Cytotoxicity Evaluation

Breast cancer is the most common cancer in females and ranked second after skin cancer. The use of natural compounds is a good alternative for the treatment of breast cancer with less toxicity than synthetic drugs. The aim of the present study is to develop and characterize hybrid Apigenin (AN) Nanoparticles (NPs) for oral delivery (AN-NPs). The hybrid AN-NPs were prepared by the self-assembly method using lecithin, chitosan and TPGS. Further, the NPs were optimized by Box-Behnken design (3-factor, 3-level). The hybrid NPs were evaluated for particle size (PS), entrapment efficiency (EE), zeta potential (ZP), and drug release. The optimized hybrid NPs (ON2), were further evaluated for solid state characterization, permeation, antioxidant, cytotoxicity and antimicrobial study. The formulation (ON2) exhibited small PS of 192.6 ± 4.2 nm, high EE 69.35 ± 1.1%, zeta potential of +36.54 mV, and sustained drug release (61.5 ± 2.5% in 24 h), as well as significantly (p < 0.05) enhanced drug permeation and antioxidant activity. The IC50 of pure AN was found to be significantly (p < 0.05) lower than the formulation (ON2). It also showed significantly greater (p < 0.05) antibacterial activity than pure AN against Bacillus subtilis and Salmonella typhimurium. From these findings, it revealed that a hybrid AN polymeric nanoparticle is a good carrier for the treatment of breast cancer.

Eco-friendly synthesis of phthalate angico gum towards nanoparticles engineering using Quality by Design (QbD) approach

We developed a new hydrophobic polymer based on angico gum (AG), and we produced new nanoparticles to expand the applications of natural polysaccharides in nanomedicine. Phthalate angico gum (PAG) was characterized by ¹H NMR, FTIR, elementary analysis, solubility, XRD, and TG. PAG was a hydrophobic and semi-crystalline material, a relevant characteristic for drug delivery system applications. As a proof of concept, nevirapine (NVP) was selected for nanoparticles development. Plackett-Burman's experimental design was used to understand the influence of several factors in nanoparticles production. PAG proved to be a versatile material for producing nanoparticles with different characteristics. Optimized nanoparticles were produced using desirability parameters. NVP-loaded PAG nanoparticles formulation showed 202.1 nm of particle size, 0.23 of PDI, -17.1 of zeta potential, 69.8 of encapsulation efficiency, and promoted modified drug release for 8 h. Here we show that PAG presents as a promising biopolymer for drug delivery systems.

Polymeric nano- and microparticulate drug delivery systems for treatment of biofilms

Now-a-days healthcare systems face great challenges with antibiotic resistance and low efficacy of antibiotics when combating pathogenic bacteria and bacterial biofilms. Administration of an antibiotic in its free form is often ineffective due to lack of selectivity to the infectious site and breakdown of the antibiotic before it exerts its effect. Therefore, polymeric delivery systems, where the antibiotic is encapsulated into a formulation, have shown great promise, facilitating a high local drug concentration at the site of infection, a controlled drug release and less drug degradation. All this leads to improved therapeutic effects and fewer systemic side effects together with a lower risk of developing antibiotic resistance. Here, we review and provide a comprehensive overview of polymer-based nano- and microparticles as carriers for antimicrobial agents and their effect on eradicating bacterial biofilms. We have a main focus on polymeric particulates containing poly(lactic-co-glycolic acid), chitosan and polycaprolactone, but also strategies involving combinations of these polymers are included. Different production techniques are reviewed and important parameters for biofilm treatment are discussed such as drug loading capacity, control of drug release, influence of particle size and mobility in biofilms. Additionally, we reflect on other promising future strategies for combating biofilms such as lipid-polymer hybrid particles, enzymatic biofilm degradation, targeted/triggered antibiotic delivery and future alternatives to the conventional particles.

Non-Ionic Surfactants for Stabilization of Polymeric Nanoparticles for Biomedical Uses

Surfactants are essential in the manufacture of polymeric nanoparticles by emulsion formation methods and to preserve the stability of carriers in liquid media. The deposition of non-ionic surfactants at the interface allows a considerable reduction of the globule of the emulsion with high biocompatibility and the possibility of oscillating the final sizes in a wide nanometric range. Therefore, this review presents an analysis of the three principal non-ionic surfactants utilized in the manufacture of polymeric nanoparticles; polysorbates, poly(vinyl alcohol), and poloxamers. We included a section on general properties and uses and a comprehensive compilation of formulations with each principal non-ionic surfactant. Then, we highlight a section on the interaction of non-ionic surfactants with biological barriers to emphasize that the function of surfactants is not limited to stabilizing the dispersion of nanoparticles and has a broad impact on pharmacokinetics. Finally, the last section corresponds to a recommendation in the experimental approach for choosing a surfactant applying the systematic methodology of Quality by Design.

Clofazimine functionalized polymeric nanoparticles for brain delivery in the tuberculosis treatment

Central nervous system tuberculosis (CNS-TB) is the most severe form of the disease especially due to the inability of therapeutics to cross the blood-brain barrier (BBB). Clofazimine (CFZ) stands out for presenting high in vitro activity against multi-drug resistant strains of Mycobacterium tuberculosis, however, CFZ physicochemical and pharmacokinetics properties limit drug penetration into the CNS and, consequently, its clinical use. The aim of this work was to develop polymeric nanoparticles (NPs) of poly(lactic-co-glycolic acid) (PLGA) and polyethylene glycol (PEG) loaded with CFZ and functionalized with a transferrin receptor (TfR)-binding peptide, aiming brain drug delivery for CNS-TB treatment by the intravenous route. The poor water solubility and high lipophilicity of CFZ was overcome through its entrapment into PLGA-PEG NPs manufactured by both conventional and microfluidic techniques using the nanoprecipitation principle. In vitro studies in brain endothelial hCMEC/D3 cells demonstrated that CFZ incorporation into the NPs was advantageous to reduce drug cytotoxicity. The TfR-binding peptide-functionalized NPs showed superior cell interaction and higher CFZ permeability across hCMEC/D3 cell monolayers compared to the non-functionalized NP control, thus indicating the efficacy of the functionalization strategy on providing CFZ transport through the BBB in vitro. The functionalized NPs demonstrate suitability for CFZ biological administration, suggested with low plasma protein binding, off-target biodistribution and precise delivery of CFZ towards the brain parenchyma.

Attenuation of lipid levels in triton induced hyperlipidemia rats through rosuvastatin calcium nanoparticles: Pharmacokinetic and pharmacodynamic studies

The aim of this research was to study the effect of marketed tablet (Crestor®) powder suspension (MTPS) and nanoparticle formulation of rosuvastatin calcium (RC) on the pharmacokinetic (PK) and pharmacodynamic (PD) parameters in hyperlipidemia rats. The hyperlipidemia is induced by intraperitoneal injection of Triton-X-100 in 0.9 %w/v saline solution. The marketed tablet was dispersed into suspension. The RC loaded nanoparticles (RC-NPs) are prepared by homogenization method. The prepared RC-NP formulation was characterized for size, drug excipient compatibility and crystallization by differential scanning calorimeter (DSC), morphology by SEM, stability at room temperature, in-vitro dissolution and in-situ absorption in rats. Further, the pharmacokinetic and pharmacodynamic studies were conducted in hyperlipidemia rats. The size of the RC-NP formulation was found to be 183.4 ± 4.5 nm and to be nearly spherical by SEM. DSC studies revealed that no interaction and RC converted to amorphous form in RC-NP formulation. RC-NP formulation was physically and chemically stable over two months at room temperature. The drug release was found to be 25.8 ± 2.5 and 89.96 ± 2.8 % in five mins, respectively from MTPS and RC-NP formulations. The P_eff of MTPS and NP of RC was 1.8 ± 0.2 × 10^-5 and 2.7 ± 0.3 × 10^-5 cm/s, respectively. From the PK studies, the enhancement in the oral bioavailability was found to be 2.4-folds when compared to MTPS formulation and statistically significant (p < 0.05). PD study of RC-NP formulation in hyperlipidemic rats exhibited decrease in lipid profile for 24 h, while MTPS exhibited a decrease in lipid profile for 12 h. Therefore, the results conclusively demonstrate the nanoparticles of RC showed significant enhancement in the PK and PD parameters.

Use of combined nanocarrier system based on chitosan nanoparticles and phospholipids complex for improved delivery of ferulic acid

A novel nanocarrier system of phospholipids complex loaded chitosan nanoparticles (FAPLC CNPs) was developed to improve the oral bioavailability and antioxidant potential of FA. FAPLC CNPs were optimized using a Box-Behnken Design (BBD). FAPLC CNPs were characterized using differential scanning calorimetry, Fourier transforms infrared spectroscopy, powder x-ray diffractometry, proton nuclear magnetic resonance, solubility, in vitro dissolution, ex vivo permeation, and in vivo antioxidant activity in carbon tetrachloride (CCl4)-induced albino rat model. The characterization studies indicated a formation of the complex as well as FAPLC CNPs. The FAPLC CNPs exhibited a lower particle size ~123.27 nm, PDI value ~0.31, and positive zeta potential ~32 mV respectively. Functional characterization studies revealed a significant improvement in the aqueous solubility, dissolution, and permeation rate of FAPLC and FAPLC CNPs compared to FA and FA CNPs. The FAPLC CNPs showed significant enhancement of in vivo antioxidant activity of FA by restoring the elevated marker enzymes in the CCl4-intoxicated rat model compared to FA CNPs. Moreover, the pharmacokinetic analysis demonstrated a significant enhancement of oral bioavailability of FA from FAPLC CNPs compared to FA CNPs. These findings show that FAPLC CNPs could be used as an effective nanocarrier for improving the oral delivery of FA.

Drug Delivery Systems on Leprosy Therapy: Moving Towards Eradication?

Leprosy disease remains an important public health issue as it is still endemic in several countries. Mycobacterium leprae, the causative agent of leprosy, presents tropism for cells of the reticuloendothelial and peripheral nervous system. Current multidrug therapy consists of clofazimine, dapsone and rifampicin. Despite significant improvements in leprosy treatment, in most programs, successful completion of the therapy is still sub-optimal. Drug resistance has emerged in some countries. This review discusses the status of leprosy disease worldwide, providing information regarding infectious agents, clinical manifestations, diagnosis, actual treatment and future perspectives and strategies on targets for an efficient targeted delivery therapy.

Recent Advances in Oral Nano-Antibiotics for Bacterial Infection Therapy

Bacterial infections are the main infectious diseases and cause of death worldwide. Antibiotics are used to treat various infections ranging from minor to life-threatening ones. The dominant route to administer antibiotics is through oral delivery and subsequent gastrointestinal tract (GIT) absorption. However, the delivery efficiency is limited by many factors such as low drug solubility and/or permeability, gastrointestinal instability, and low antibacterial activity. Nanotechnology has emerged as a novel and efficient tool for targeting drug delivery, and a number of promising nanotherapeutic strategies have been widely explored to overcome these obstacles. In this review, we explore published studies to provide a comprehensive understanding of the recent progress in the area of orally deliverable nano-antibiotic formulations. The first part of this article discusses the functions and underlying mechanisms by which nanomedicines increase the oral absorption of antibiotics. The second part focuses on the classification of oral nano-antibiotics and summarizes the advantages, disadvantages and applications of nanoformulations including lipid, polymer, nanosuspension, carbon nanotubes and mesoporous silica nanoparticles in oral delivery of antibiotics. Lastly, the challenges and future perspective of oral nano-antibiotics for infection disease therapy are discussed. Overall, nanomedicines designed for oral drug delivery system have demonstrated the potential for the improvement and optimization of currently available antibiotic therapies.

Mannose receptor targeted bioadhesive chitosan nanoparticles of clofazimine for effective therapy of tuberculosis

Drug-resistant tuberculosis (TB) is one of the most lethal diseases, and it is imperative to exploit an advanced drug formulation for its effective treatment. This work aims to develop a mannose receptor-targeted bioadhesive chitosan nanoparticles for effective drug-resistant tuberculosis treatment. The clofazimine loaded chitosan nanoparticles were formulated; their size, charge, polydispersity (PDI), surface morphology, entrapment efficiency (EE) and in-vitro release pattern were established. Also, cellular uptake study on C2C12 cell lines and anti-mycobacterial activity against H37Rv (a standard strain of Mycobacterium tuberculosis) were evaluated. The particle sizes of formulated chitosan nanoparticles were in the range of 132–184 nm and EE was also found to be between 73 and 95%. The functionalization of bioadhesive chitosan nanoparticles with mannose was confirmed by infrared spectroscopy (FTIR). The uptake studies on the C2C12 cell lines showed that mannosylated nanoparticles were more efficiently internalized when compared to non-targeted nanoparticles. Further, luciferase reporter phage (LRP) assay against H37Rv strain showed that clofazimine nanoparticles were found to be 49.5 times superior in terms of inhibition and anti-mycobacterial activity than free clofazimine. This excellent activity might be attributed to enhanced drug delivery with a promising bioadhesion property of chitosan-based nanoparticles.

Microwave-initiated rapid synthesis of phthalated cashew gum for drug delivery systems

Chemical modification of polysaccharides is an important approach for their transformation into customized matrices that suit different applications. Microwave irradiation (MW) has been used to catalyze chemical reactions. This study developed a method of MW-initiated synthesis for the production of phthalated cashew gum (Phat-CG). The structural characteristics and physicochemical properties of the modified biopolymers were investigated by FTIR, GPC, ¹H NMR, relaxometry, elemental analysis, thermal analysis, XRD, degree of substitution, and solubility. Phat-CG was used as a matrix for drug delivery systems using benznidazole (BNZ) as a model drug. BNZ is used in the pharmacotherapy of Chagas disease. The nanoparticles were characterized by size, PDI, zeta potential, AFM, and in vitro release. The nanoparticles had a size of 288.8 nm, PDI of 0.27, and zeta potential of -31.8 mV. The results showed that Phat-CG has interesting and promising properties as a new alternative for improving the treatment of Chagas disease.

Nanoformulation strategies for improving intestinal permeability of drugs: A more precise look at permeability assessment methods and pharmacokinetic properties changes

The therapeutic efficacy of orally administered drugs is often restricted by their inherent limited oral bioavailability. Low water solubility, limited permeability through the intestinal barrier, instability in harsh environment of the gastrointestinal (GI) tract and being substrate of the efflux pumps and the cytochrome P450 (CYP) can impair oral drug bioavailability resulting in erratic and variable plasma drug profile. As more drugs with low membrane permeability are developed, new interest is growing to enhance their intestinal permeability and bioavailability. A wide variety of nanosystems have been developed to improve drug transport and absorption. Sufficient evidence exists to suggest that nanoparticles are able to increase the transepithelial transport of drug molecules. However, key questions remained unanswered. What types of nanoparticles are more efficient? What are preclinical (or clinical) achievements of each type of nanoformulation in terms of pharmacokinetic (PK) parameters? Addressing this issue in this paper, we have reviewed the current literature regarding permeability enhancement, permeability assessment methods and changes in PK parameters following administration of various nanoformulations. Although permeability enhancement by various nanoformulations holds great promise for oral drug delivery, many challenges still need to be addressed before development of more clinically successful nanoproducts.

Solid-State Behavior and Solubilization of Flash Nanoprecipitated Clofazimine Particles during the Dispersion and Digestion of Milk-Based Formulations

Clofazimine, a drug previously used to treat leprosy, has recently been identified as a potential new drug for the treatment for cryptosporidiosis: a diarrheal disease that contributes to 500 000 infant deaths a year in developing countries. Rapid dissolution and local availability of the drug in the small intestine is considered key to the treatment of the infection. However, the commercially available clofazimine formulation (Lamprene) is not well-suited to pediatric use, and therefore reformulation of clofazimine is desirable. Development of clofazimine nanoparticles through the process of flash nanoprecipitation (FNP) has been previously shown to provide fast and improved drug dissolution rates compared to clofazimine crystals and Lamprene. In this study, we investigate the effects of milk-based formulations (as possible pediatric-friendly vehicles) on the in vitro solubilization of clofazimine formulated as either lecithin- or zein/casein-stabilized nanoparticles. Milk and infant formula were used as the lipid vehicles, and time-resolved synchrotron X-ray scattering was used to monitor the presence of crystalline clofazimine in suspension during in vitro lipolysis under intestinal conditions. The study confirmed faster dissolution of clofazimine from all the FNP formulations after the digestion of infant formula was initiated, and a reduced quantity of fat was required to achieve similar levels of drug solubilization compared to the reference drug material and the commercial formulation. These attributes highlight not only the potential benefits of the FNP approach to prepare drug particles but also the fact that enhanced dissolution rates can be complemented by considering the amount of co-administered fat in lipid-based formulations to drive the solubilization of poorly soluble drugs.

Nanosystems as modulators of intestinal dapsone and clofazimine delivery

The aim of this work was to assess the feasibility of drug nanosystems combination for oral therapy of multibacillary leprosy. The anti-leprotic drugs dapsone (DAP) and clofazimine (CLZ) were incorporated within polymeric nanosystems and studied per se and in combination. DAP was loaded in Eudragit L100 nanoparticles (NPs-DAP) while CLZ was loaded in (poly(lactic-co-glycolic acid) (NPs-CLZ). The nanosystems exhibited around 200 nm in size and a drug loading of 12% for each drug. In vitro cytotoxicity on intestinal Caco-2 cells revealed that after 8 h incubation, DAP alone and within NPs were not toxic up to 100 μg mL^-1, while CLZ per se was toxic, reducing cell viability to 30% at 50 μg mL^-1. Caco-2 exposed to the combination of NPs-DAP (100 μg mL^-1) and NPs-CLZ (50 μg mL^-1) exhibited 80% of viability. Caco-2 monolayer permeability assays revealed that DAP and CLZ in the nanosystems per se or in NPs-DAP/ NPs-CLZ combination crossed the intestinal barrier. No significant differences were observed between the single nanosystems or in combination with the apparent permeability values and the amount of permeated drug. Thus, the NPs-DAP/NPs-CLZ combination seems to be a promising platform to deliver both drugs in association, representing an important step towards the improvement of multibacillary leprosy therapy.

Development of a microparticulate system containing Brazilian propolis by-product and gelatine for ascorbic acid delivery: evaluation of intestinal cell viability and radical scavenging activity

The use of propolis by-product (PBP) microparticles (MP) as delivery systems can be a promising tool to surpass drawbacks related to low stability of ascorbic acid (AA).