Microdialysis and nanofiltration allow to distinguish molecularly dissolved from colloid- associated drug concentrations during biomimetic dissolution testing of supersaturating formulations

The impact of volume of dissolution medium for biopredictive dissolution/permeation studies of enabling formulations: A comparison of two brands of telmisartan / amlodipine tablets

For compendial dissolution testing of solid dosage forms, media volumes of 500 to 900 mL are used in apparatus I and II to ensure sink conditions. However, these volumes are considerably larger than those in the gastrointestinal tract. Thus, the experiments are not biomimetic and possibly not suitable for biopredictive dissolution testing. The present study investigates the influence of volumes of dissolution media in non-compendial dissolution/permeation settings. Dissolution/permeation studies of two commercial bilayer tablets (Twynsta® and Arrow) containing the active pharmaceutical ingredients telmisartan (40 mg) and amlodipine (10 mg) were evaluated using the MacroFlux tool with various biomimetic media mimicking fasted and fed states as well as biological variability ("biorelevant"). Particularly, the two-stage dissolution process of telmisartan from the tablets is interesting because the compound has a pH-dependent solubility, and 2-stage dissolution leads to supersaturation and precipitation upon pH shift. For telmisartan, lower dissolution volumes significantly induced precipitation, leading to lower permeation, while no precipitation was observed in the larger volume. The permeation of telmisartan was overly sensitive to both pH and micelle concentrations in the biomimetic media. Amlodipine showed complete dissolution under any conditions, which correlates with its known complete absorption in vivo. In conclusion, volumes of dissolution media (and their compositions) are key parameters and play a significant role for designing relevant biomimetic experiments used to predict the bioavailability of supersaturating systems.

A high-throughput micro-scale workflow to quantify molecularly dissolved drug concentrations under solubilizing conditions

Physiological and artificial solubilizing agents usually enhance apparent solubility of poorly soluble drugs, and in many cases also oral drug exposure. However, exposure may decrease in cases where micellization reduces the molecularly dissolved drug fraction, overriding the solubility advantage. While this information is critical to accurately anticipate the effect of drug micellization on oral absorption, the experimental determination of molecularly dissolved drug concentrations is complex and time consuming. The present study aimed at developing a micro-scale in vitro workflow (comparative micro-scale mass transfer assay, CMMTA) to quantify molecularly dissolved (unbound) drug concentrations in the presence of solubilizing agents. A linear correlation was determined between the cumulative passive permeation of the model drug riluzole (RLZ) and its concentration in the donor buffer solution on a 96-well microtiter sandwich plate (PermeaPlain™). Next, the drug permeation from micellar drug solutions (in fasted and fed state simulated intestinal fluids, FaSSIF and FeSSIF) was measured and the concentration of unbound drug was derived from the aforementioned correlation. The results were validated against established methods to measure free (unbound) drug concentrations, namely equilibrium dialysis and microdialysis. The concentrations of molecularly dissolved RLZ were correctly captured on one single microtiter plate. Both, the standard curve and samples at different solubilizing conditions can be determined simultaneously within a few hours using small quantities of drug substance. Hence, the proposed CMMTA workflow represents a promising screening tool for early-stage drug development.

Mechanistic Insights into Amorphous Solid Dispersions: Bridging Theory and Practice in Drug Delivery

Improving the bioavailability  of poorly water-soluble drugs presents a significant challenge in pharmaceutical development. Amorphous solid dispersions (ASDs) have garnered substantial attention for their capability to augment the solubility and dissolution rate of poorly water-soluble drugs, thereby markedly enhancing their bioavailability. ASDs, characterized by a metastable equilibrium where the active pharmaceutical ingredient (API) is molecularly dispersed, offer enhanced absorption compared to crystalline forms. This review explores recent research advancements in ASD, emphasizing dissolution mechanisms, phase separation phenomena, and the importance of drug loading and congruency limits on ASD performance. Principal occurrences such as liquid-liquid phase separation (LLPS) and supersaturation are discussed, highlighting their impact on drug solubility, absorption and subsequent bioavailability. Additionally, it addresses the role of polymers in controlling supersaturation, stabilizing drug-rich nanodroplets, and inhibiting recrystallization. Recent advancements and emerging technologies offer new avenues for ASD characterization and production and demonstrate the potential of ASDs to enhance bioavailability and reduce variability, making possible for more effective and patient-friendly pharmaceutical formulations. Future research directions are proposed, focusing on advanced computational models for predicting ASD stability, use of novel polymeric carriers, and methods for successful preparations.

Melt-extruded formulations of fenofibrate with various grades of hydrogenated phospholipid exhibit promising in-vitro biopharmaceutical behavior

In the current study, it was demonstrated that three commercially available grades of hydrogenated phospholipids (HPL) differing in their content of phosphatidylcholine may be used as components for hot melt-extruded binary (HPL as sole excipient) or ternary (in combination with copovidone) solid dispersions of fenofibrate (FEN) at mass fractions between 0.5 and 20% (ternary) or 80% (binary). X-ray powder diffraction indicated complete conversion of crystalline fenofibrate into the amorphous state by hot melt extrusion for all ternary blends. In contrast, both the binary blends (HPL- and copovidone-based) contained minor remaining crystallites. Irrespectively, all solid dispersions induced during dissolution studies a supersaturated state of FEN, where the ternary ASDs showed enhanced and more complete release of FEN as compared to the binary blends and, even more pronounced, in comparison to the marketed micronized and nano-milled formulations. In terms of the cumulated amount permeated, there were marginal differences between the various formulations when combined dissolution/permeation was done using FeSSIF as donor medium; with FaSSIF as donor medium, the binary HPL-ASD containing the grade with the highest phosphatidylcholine fraction performed best in terms of permeation, even significantly better than the marketed nano-crystal formulation. Otherwise, no significant differences were seen between the various grades of HPL when FEN dissolution and permeation were analyzed for ternary solid dispersions. In conclusion, the in-vitro biopharmaceutical behaviour of hydrogenated phospholipid-containing blends manufactured by hot melt extrusion appears promising. They can be a viable formulation option for poorly water-soluble and lipophilic drug compounds like FEN.

Oral Absorption from Surfactant-Based Drug Formulations: The Impact of Molecularly Dissolved Drug on Bioavailability

Enabling drug formulations are often required to ensure sufficient absorption after oral administration of poorly soluble drugs. While these formulations typically increase the apparent solubility of the drug, it is widely acknowledged that only molecularly dissolved, i.e., free fraction of the drug, is prone for direct absorption, while colloid-associated drug does not permeate to the same extent. In the present study, we aimed at comparing the effect of molecularly and apparently (i.e., the sum of molecularly and colloid-associated drug) dissolved drug concentrations on the oral absorption of a poorly water-soluble drug compound, Alectinib. Mixtures of Alectinib and respectively 50 %, 25 %, 12.5 %, and 3 % sodium lauryl sulfate (SLS) relative to the dose were prepared and small-scale dissolution tests were performed under simulated fed and fasted state conditions. Both the molecularly and apparently dissolved drug concentrations were assessed in parallel using microdialysis and centrifugation/filtration sampling, respectively. The data served as the basis for an in vitro-in vivo correlation (IVIVC) and as input for a GastroPlusTM physiologically-based biopharmaceutics model (PBBM). It was shown that with increasing the content of SLS the apparently dissolved drug in FeSSIF and FaSSIF increased to a linear extent and thus, the predicted in vivo performance of the 50 % SLS formulation, based on apparently dissolved drug, would outperform all other formulations. Against common expectation, however, the free (molecularly dissolved) drug concentrations were found to vary with SLS concentrations as well, yet to a minor extent. A systematic comparison of solubilized and free drug dissolution patterns at different SLS contents of the formulations and prandial states allowed for interesting insights into the complex dissolution-/supersaturation-, micellization-, and precipitation-behavior of the formulations. When comparing the in vitro datasets with human pharmacokinetic data from a bioequivalence study, it was shown that the use of molecularly dissolved drug resulted in an improved IVIVC. By incorporating the in vitro dissolution datasets into the GastroPlusTM PBBM, the apparently dissolved drug concentrations resulted in both, a remarkable overprediction of plasma concentrations as well as a misprediction of the influence of SLS on systemic exposure. In contrast, by using the molecularly dissolved drug (i.e., free fraction) as the model input, the predicted plasma concentration-time profiles were in excellent agreement with observed data for all formulations under both fed and fasted conditions. By combining an advanced in vitro assessment with PBBM, the present study confirmed that only the molecularly dissolved drug, and not the colloid-associated drug, is available for direct absorption.

Water-mediated phase transformations of posaconazole: An intricate jungle of crystal forms

Posaconazole is a broad-spectrum antifungal agent exhibiting rich polymorphism. Up to now, a total of fourteen different crystal forms have been reported, sometimes with an ambiguous nomenclature, but less is known about their properties and stability relationships. Investigating the solid-state of a drug compound is essential to identify the most stable form under working conditions and to prevent the risk of undesired solid-phase transformations under processing and storage. In this paper, we study posaconazole polymorphism by providing a description of its polymorphs, hydrates, and solvates. Powder X-ray diffraction (PXRD), dynamic vapor sorption (DVS), spectroscopic and thermal techniques were employed to characterize the different forms. In addition, the solid-phase transformations of posaconazole in aqueous suspensions were studied by means of Raman microscopy. Surprisingly, we found that Form S, the crystal form contained in the marketed oral suspension, is not the most stable form in water. Form S readily converts to a more stable hydrate, i.e. Form A, after storage in water for two weeks. In the commercial oral formulation the conversion between the two forms is prevented by the presence of polysorbate 80. Such insights into the stabilizing excipient effects beyond particle dispersion are critical to formulators.

Supersaturable diacyl phospholipid dispersion for improving oral bioavailability of brick dust molecule: A case study of Aprepitant

This study aims to investigate the potential use of polymer inclusion in the phospholipid-based solid dispersion approach for augmenting the biopharmaceutical performance of Aprepitant (APT). Initially, different polymers were screened using the microarray plate method to assess their ability to inhibit drug precipitation in the supersaturated solution and HPMCAS outperformed the others. Later, the binary (BD) and ternary (TD) phospholipid dispersions were prepared using the co-solvent evaporation method. Solid-state characterization was performed using SEM and PXRD to examine the physical properties, while molecular interactions were probed through FTIR and NMR analysis. In vitro dissolution studies were performed in both fasted and fed state biorelevant media. The results demonstrated a substantial increase in drug release from BD and TD, approximately 4.8 and 9.9 times higher compared to crystalline APT in FaSSIF. Notably, TD also showed a lowered dissolution difference between fed and fasted states in comparison to crystalline APT, indicating a reduction in the positive food effect of APT. Moreover, we assessed the impact of polymer inclusion on permeation under in vitro biomimetic conditions. In comparison with the crystalline APT suspension, both BD and TD demonstrated approximately 3.3 times and 14 times higher steady-state flux (Jss values), respectively. This can be ascribed to the supersaturation and presence of drug-rich submicron particles (nanodroplets) along with the multiple aggregates of drug with phospholipids and polymer in the donor compartment, consequently resulting in a more substantial driving force for passive diffusion. Lastly, in vivo pharmacokinetic evaluation demonstrated the enhanced absorption of both TD and BD over the free drug suspension in the fasted state. This enhancement was evident through a 2.1-fold and 1.3-fold increase in Cmax and a 2.3-fold and 1.4-fold increase in AUC0-t, respectively. Overall, these findings emphasize the potential of polymer-based phospholipid dispersion in enhancing the overall biopharmaceutical performance of APT.

Using molecularly dissolved drug concentrations in PBBMs improves the prediction of oral absorption from supersaturating formulations

Predicting the absorption of drugs from enabling formulations is still challenging due to the limited capabilities of standard physiologically based biopharmaceutics models (PBBMs) to capture complex absorption processes. Amongst others, it is often assumed that both, molecularly and apparently dissolved drug in the gastrointestinal lumen are prone to absorption. A recently introduced method for measuring concentrations of molecularly dissolved drug in a dynamic in vitro dissolution setup using microdialysis has opened new opportunities to test this hypothesis and refine mechanistic PBBM approaches. In the present study, we compared results of PBBMs that used either molecularly or apparently dissolved concentrations in the simulated gastrointestinal lumen as input parameters. The in vitro dissolution data from three supersaturating formulations of Posaconazole (PCZ) were used as model input. The modeling outcome was verified using PCZ concentration vs. time profiles measured in human intestinal aspirates and in the blood plasma. When using apparently dissolved drug concentrations (i.e., the sum of colloid-associated and molecularly dissolved drug) the simulated systemic plasma exposures were overpredicted, most pronouncedly with the ASD-based tablet. However, if the concentrations of molecularly dissolved drug were used as input values, the PBBM resulted in accurate prediction of systemic exposures for all three PCZ formulations. The present study impressively demonstrated the value of considering molecularly dissolved drug concentrations as input value for PBBMs of supersaturating drug formulations.

Overcoming drug impurity challenges in amorphous solid dispersion with rational development of biorelevant dissolution-permeation method

Hot-melt extrusion is often used to prepare amorphous solid dispersion to overcome low drug solubility and enhance bio-performance of the formulation. Due to the uniqueness of each drug - polymer combination and its physico-chemical properties, setting the appropriate HME barrel temperature, feed rate and screw speed ensures drug amorphization, absence of residual crystallinity, absence of water, and a suitable drug release profile. In this research, samples with BCS II/IV model drug and PVP/VA polymer were prepared to evaluate the impact of HME process parameters, incoming drug form (anhydrous vs. hydrate), and drug supplier (i.e., impurity profile), on biorelevant drug release. This study provides a relationship between observed in vitro supersaturation and precipitation behavior of amorphous solid dispersion formulation with in vivo results, on patients, by using the acceptor profile of side-by-side dissolution-permeation apparatus. An in vitro dissolution method, in small volumes, in an apparatus with paddles and dissolution-permeation side-by-side method was developed on the MicroFlux™ apparatus to assess if the differences observed in vitro bears relevance to the bioequivalence outcome in vivo. The former was used to guide the generic drug product development due to high discriminatory strength, while the latter was biorelevant, due to the inclusion of the second compartment assuring absorptive environment to capture the impact of supersaturation and subsequent precipitation on bioavailability. Bio-relevancy of the in vitro method was confirmed with the in vivo dog study and clinical study on patients, and an in vitro - in vivo correlation was established. For the investigated BCS II/IV drug, this research highlights the importance of considering supersaturation and formation of colloidal species during amorphous solid dispersion release testing to assure product quality, safety and efficacy.

Drug Dissolution in Oral Drug Absorption: Workshop Report

The in-person workshop "Drug Dissolution in Oral Drug Absorption" was held on May 23-24, 2023, in Baltimore, MD, USA. The workshop was organized into lectures and breakout sessions. Three common topics that were re-visited by various lecturers were amorphous solid dispersions (ASDs), dissolution/permeation interplay, and in vitro methods to predict in vivo biopharmaceutics performance and risk. Topics that repeatedly surfaced across breakout sessions were the following: (1) meaning and assessment of "dissolved drug," particularly of poorly water soluble drug in colloidal environments (e.g., fed conditions, ASDs); (2) potential limitations of a test that employs sink conditions for a poorly water soluble drug; (3) non-compendial methods (e.g., two-stage or multi-stage method, dissolution/permeation methods); (4) non-compendial conditions (e.g., apex vessels, non-sink conditions); and (5) potential benefit of having both a quality control method for batch release and a biopredictive/biorelevant method for biowaiver or bridging scenarios. An identified obstacle to non-compendial methods is the uncertainty of global regulatory acceptance of such methods.

Hydrogenated phospholipid, a promising excipient in amorphous solid dispersions of fenofibrate for oral delivery: Preparation and in-vitro biopharmaceutical characterization

Amorphous solid dispersions (ASD) represent a viable formulation strategy to improve dissolution and bioavailability of poorly soluble drugs. Our study aimed to evaluate the feasibility and potential role of hydrogenated phospholipid (HPL) as a matrix material and solubilizing additive for binary (alone) or ternary (in combination with polymers) solid dispersions, using fenofibrate (FEN) as the model drug. FEN, incorporated within ASDs by melting or freeze-drying (up to 20% m/m), stayed amorphous during short-term stability studies. The solubility enhancing potential of HPL depended on the dissolution medium. In terms of enhancing in vitro permeation, solid dispersions with HPL were found equally or slightly more potent as compared to the polymer-based ASD. For studied ASD, in vitro permeation was found substantially enhanced as compared to a suspension of crystalline FEN and at least equal compared to marketed formulations under comparable conditions (literature data). Additionally, while the permeation of neat FEN and FEN in binary solid dispersions was affected by the dissolution medium (i.e., the "prandial state"), for ternary solid dispersions the permeation was independent of the "prandial state" (FaSSIF = FeSSIF). This suggests that ternary solid dispersions containing both polymer and HPL may represent a viable formulation strategy to mitigate fenofibrate's food effect.

In-situ formation of nanoparticles from drug-loaded 3D polymeric matrices

The in-situ formation of nanoparticles from polymer-based solid medicines, although previously described, has been overlooked despite its potential to interfere with oral drug bioavailability. Such polymeric pharmaceuticals are becoming increasingly common on the market and can become even more popular due to the dizzying advance of 3D printing medicines. Hence, this work aimed to study this phenomenon during the dissolution of 3D printed tablets produced with three different polymers, hydroxypropylmethylcellulose acetate succinate (HPMCAS), polyvinyl alcohol (PVA), and Eudragit RL PO® (EUD RL) combined with plasticizers and the model drug naringenin (NAR). The components' interaction, dissolution behavior, and characteristics of the formed particles were investigated employing thermal, spectroscopic, mechanical, and chromatographic assays. All the systems generated stable spherical-shaped particles throughout 24 h, encapsulating over 25% of NAR. Results suggest encapsulation efficiencies variations may depend on interactions between polymer-drug, drug-plasticizer, and polymer-plasticizer, which formed stable nanoparticles even in the drug absence, as observed with the HPMCAS and EUD RL formulations. Additionally, components solubility in the medium and previous formulation treatments are also a decisive factor for nanoparticle formation. In particular, the treatment provided by hot-melt extrusion and FDM 3D printing affected the dissolution efficiency enhancing the interaction between the components, reverberating on particle size and particle formation kinetics mainly for HPMCAS and EUD RL. In conclusion, the 3D printing process influences the in-situ formation of nanoparticles, which can directly affect oral drug bioavailability and needs to be monitored.

Combining in vitro dissolution/permeation with microdialysis sampling: Capabilities and limitations for biopharmaceutical assessments of supersaturating drug formulations

Many novel small drug molecules are poorly water-soluble and thus, enabling drug formulations may be required to ensure sufficient absorption upon oral administration. Biopharmaceutical assessment and absorption prediction of enabling formulations, however, remains challenging. Combined in vitro dissolution/permeation (D/P) assays have gained increasing interest since they may provide a more realistic formulation ranking based on the drug permeation profiles from different formulations as compared to conventional dissolution, which captures both readily permeable and not readily permeable fractions of "dissolved" drug. Moreover, the combined in vitro D/P assays allow to better predict intestinal supersaturation and precipitation processes as compared to simple dissolution setups due to the effect of an absorptive sink. Microdialysis on the other hand has proven useful to determine molecularly dissolved drug in colloidal dispersions, thus allowing for a deeper mechanistic insight into the mechanism of drug release from supersaturating formulations. Here, microdialysis sampling from the donor compartment was used in combination with the dissolution/permeation (D/P) tool PermeaLoop™ to study commercial supersaturating drug formulations of the poorly soluble and weakly basic drug Posaconazole (PCZ). An amorphous solid dispersion (ASD)-based tablet, as well as a crystalline suspension in acidified and neutral dilution medium, respectively, were tested. Microdialysis sampling allowed for differentiation between molecularly dissolved and micellar drug concentration, as expected, but, surprisingly, it was found that the presence of the microdialysis probe affected the precipitation behavior of a crystalline suspension within the two-stage D/P setup, simulating the oral administration of the acidified PCZ (Noxafil®) suspension: the extent and duration of supersaturation in the donor decreased significantly, which also affected permeation. Similarly, for the ASD-based tablet, a less pronounced supersaturation was observed during the first 120 min of the experiment. Hence, in this case, the formulation ranking and the prediction of intestinal supersaturation in the in vitro D/P assay became less predictive as compared to a conventional PermeaLoop™ study without microdialysis sampling. It was concluded that valuable mechanistic insights into the molecularly dissolved drug profiles over time can be obtained by microdialysis. However, since the presence of the probe may affect the degree of supersaturation and precipitation, a conventional D/P assay (without microdialysis sampling) is preferred for formulation ranking of supersaturating drug formulations.

In vitro dissolution/permeation tools for amorphous solid dispersions bioavailability forecasting II: Comparison and mechanistic insights

Along with the increasing demand for complex formulations comes the need for appropriate in vitro methodologies capable of predicting their corresponding in vivo performance and the mechanisms controlling the drug release which can impact on in vivo drug absorption. In vitro dissolution-permeation (D/P) methodologies that can account for the effects of enabling formulations on the permeability of drugs are increasingly being used in performance ranking during early development stages. This work comprised the application of two different cell-free in vitro D/P setups: BioFLUX™ and PermeaLoop™ to evaluate the dissolution-permeation interplay upon drug release from itraconazole (ITZ)- HPMCAS amorphous solid dispersions (ASDs) of different drug loads. A solvent-shift approach was employed, from a simulated gastric environment to a simulated intestinal environment in the donor compartment. PermeaLoop™ was then combined with microdialysis sampling to separate the dissolved (free) drug from other species present in solution, like micelle-bound drug and drug-rich colloids, in real time. This setup was applied to clarify the mechanisms for drug release and permeation from these ASDs. In parallel, a pharmacokinetic study (dog model) was conducted to assess the drug absorption from these ASDs and to compare the in vivo results with the data obtained from each in vitro D/P setup, allowing to infer which would be the most adequate setup for ASD ranking. Even though both D/P systems resulted in the same qualitative ranking, BioFLUX™ overpredicted the difference between the in vivo AUC of two ASDs, whereas PermeaLoop™ permeation flux resulted in a good correlation with the AUC observed in pharmacokinetic studies (dog model) (R2 ≈ 0.98). Also, PermeaLoop™ combined with a microdialysis sampling probe clarified the mechanisms for drug release and permeation from these ASDs. It demonstrated that the free drug was the only driving force for permeation, while the drug-rich colloids kept permeation active for longer periods by acting as drug reservoirs and maintaining constant high levels of free drug in solution, which are then immediately able to permeate. Hence, the data obtained points BioFLUX™ and PermeaLoop™ applications to different momentums in the drug product development pipeline: while BioFLUX™, an automated standardized method, poses as a valuable tool for initial ASD ranking during the early development stages, PermeaLoop™ combined with microdialysis sampling allows to gain mechanistic understanding of the dissolution-permeation interplay, being crucial to fine tune and identify leading ASD candidates prior to in vivo testing.

Insight into the mechanism behind oral bioavailability-enhancement by nanosuspensions through combined dissolution/permeation studies

As numerous new drug candidates are poorly water soluble, enabling formulations are needed to increase their bioavailability for oral administration. Nanoparticles are a conceptually simple, yet resource consuming strategy for increasing drug dissolution rate, as predicting in vivo oral absorption using in vitro dissolution remains difficult. The objective of this study was to obtain insight into nanoparticle characteristics and performance utilizing an in vitro combined dissolution/permeation setup. Two examples of poorly soluble drugs were examined (cinnarizine and fenofibrate). Nanosuspensions were produced by top-down wet bead milling using dual asymmetric centrifugation, obtaining particle diameters of approx. 300 nm. DSC and XRPD studies indicated that nanocrystals of both drugs were present with retained crystallinity, however with some disturbances. Equilibrium solubility studies showed no significant increase in drug solubility over the nanoparticles, as compared to the raw APIs. Combined dissolution/permeation experiments revealed significantly increased dissolution rates for both compounds compared to the raw APIs. However, there were substantial differences between the dissolution curves of the nanoparticles as fenofibrate exhibited supersaturation followed by precipitation, whereas cinnarizine did not exhibit any supersaturation, but instead a shift towards faster dissolution rate. Permeation rates were found significantly increased for both nanosuspensions when compared to the raw APIs, indicating a direct implication that formulation strategies are needed, be it stabilization of supersaturation by precipitation inhibition and/or dissolution rate enhancement. This study indicates that in vitro dissolution/permeation studies can be employed to better understand the oral absorption enhancement of nanocrystal formulations.

Biopredictive capability assessment of two dissolution/permeation assays, µFLUX™ and PermeaLoop™, using supersaturating formulations of Posaconazole

The majority of new drug entities exhibits poor water solubility and therefore enabling formulations are often needed to ensure sufficient in vivo bioavailability upon oral administration. Several in vitro tools have been proposed for biopredictive screening of such drug formulations to facilitate formulation development. Among these, combined dissolution/permeation (D/P) assays have gained increasing interest in recent years, since they are presumed to better predict the absorption behavior as compared to single-compartment dissolution assays. Moreover, especially for supersaturating formulations, it has been demonstrated that the presence of an absorption sink better mimics the intraluminal supersaturation performance. The present study aimed to investigate the biopredictive abilities of two in vitro D/P setups to predict intestinal supersaturation and systemic absorption of supersaturable systems. Experiments were performed with a µFLUX™ and PermeaLoop™ apparatus, respectively, which differ primarily in their volume-to-area ratios between donor compartment and membrane as well as in the type of biomimetic barrier. A two-stage dissolution protocol was adopted to mimic the transit from acidic stomach to more neutral intestinal fluids using biomimetic media. Three formulations of the weakly basic compound Posaconazole (PCZ), namely an acidified and a neutral suspension and an amorphous solid dispersion (ASD) tablet, were tested. Under the present conditions, and for the specific set of formulations studied here, PermeaLoop™ showed a better biopredictive ability for intestinal supersaturation and systemic absorption for the three formulations than the µFLUX™ D/P setup. Interestingly, minor modifications of the two-stage D/P protocol in terms of medium transfer rates from simulated gastric fluid (SGF) to fasted state simulated intestinal fluid (FaSSIF) had a substantial impact particularly on the permeation of the crystalline PCZ suspension ("acidified suspension"). The ASD tablet was less sensitive to gradual medium changes than the crystalline PCZ suspensions. The current study confirms the usefulness of D/P assays for formulation ranking of weakly basic compounds and supersaturating formulations.